Basic Kontron SMARC-sAL28 board support
v5 cover Basic Kontron SMARC-sAL28 board support
Add basic board support for the Kontron SMARC-sAL28 board. Please note, that this board doesn't support TF-a (yet). Therefore, the u-boot SPL is the first code which is run and it has to set up the RAM.
changes since v4:
- dropped "armv8: ls1028a: move FSL_LAYERSCAPE to kconfig" as it is already upstream
- new patch "board: sl28: add board specific nvm command"
- use binman
- sync device trees with linux
- use "<devicetree>-u-boot.dtsi" style
- rebase to lastest master
changes since v3:
- rebase to latest master
- use CONFIG_PCI_INIT_R
- set fdtfile in default environment
changes since v2:
- add variant 4 support. Since the atheros PHY dt bindings were merged into master, we can now use them
- add environment section in include/configs/kontron_sl28.h
- add cover letter
changes since v1:
- fix watchdog device tree reference
Michael Walle (2):
board: kontron: add sl28 support
board: sl28: add board specific nvm command
arch/arm/Kconfig | 11 + arch/arm/dts/Makefile | 3 + .../dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 135 +++++++++++++ .../fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi | 1 + .../arm/dts/fsl-ls1028a-kontron-sl28-var3.dts | 15 ++ .../fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi | 1 + .../arm/dts/fsl-ls1028a-kontron-sl28-var4.dts | 48 +++++ arch/arm/dts/fsl-ls1028a-kontron-sl28.dts | 189 ++++++++++++++++++ board/kontron/sl28/Kconfig | 18 ++ board/kontron/sl28/MAINTAINERS | 6 + board/kontron/sl28/Makefile | 8 + board/kontron/sl28/README | 142 +++++++++++++ board/kontron/sl28/cmds.c | 176 ++++++++++++++++ board/kontron/sl28/common.c | 10 + board/kontron/sl28/ddr.c | 98 +++++++++ board/kontron/sl28/sl28.c | 75 +++++++ board/kontron/sl28/spl.c | 32 +++ configs/kontron_sl28_defconfig | 106 ++++++++++ include/configs/kontron_sl28.h | 125 ++++++++++++ 19 files changed, 1199 insertions(+) create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28.dts create mode 100644 board/kontron/sl28/Kconfig create mode 100644 board/kontron/sl28/MAINTAINERS create mode 100644 board/kontron/sl28/Makefile create mode 100644 board/kontron/sl28/README create mode 100644 board/kontron/sl28/cmds.c create mode 100644 board/kontron/sl28/common.c create mode 100644 board/kontron/sl28/ddr.c create mode 100644 board/kontron/sl28/sl28.c create mode 100644 board/kontron/sl28/spl.c create mode 100644 configs/kontron_sl28_defconfig create mode 100644 include/configs/kontron_sl28.h
Signature · 1 line
2.20.1
PATCH v5 1/2 board: kontron: add sl28 support
Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux.
For now, the Single and Dual PHY variant is supported. Other variants will fall back to the basic variant.
In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details.
--- arch/arm/Kconfig | 11 + arch/arm/dts/Makefile | 3 + .../dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 135 +++++++++++++ .../fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi | 2 + .../arm/dts/fsl-ls1028a-kontron-sl28-var3.dts | 15 ++ .../fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi | 2 + .../arm/dts/fsl-ls1028a-kontron-sl28-var4.dts | 48 +++++ arch/arm/dts/fsl-ls1028a-kontron-sl28.dts | 189 ++++++++++++++++++ board/kontron/sl28/Kconfig | 18 ++ board/kontron/sl28/MAINTAINERS | 6 + board/kontron/sl28/Makefile | 8 + board/kontron/sl28/README | 63 ++++++ board/kontron/sl28/common.c | 10 + board/kontron/sl28/ddr.c | 98 +++++++++ board/kontron/sl28/sl28.c | 70 +++++++ board/kontron/sl28/spl.c | 32 +++ configs/kontron_sl28_defconfig | 106 ++++++++++ include/configs/kontron_sl28.h | 125 ++++++++++++ 18 files changed, 941 insertions(+) create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28.dts create mode 100644 board/kontron/sl28/Kconfig create mode 100644 board/kontron/sl28/MAINTAINERS create mode 100644 board/kontron/sl28/Makefile create mode 100644 board/kontron/sl28/README create mode 100644 board/kontron/sl28/common.c create mode 100644 board/kontron/sl28/ddr.c create mode 100644 board/kontron/sl28/sl28.c create mode 100644 board/kontron/sl28/spl.c create mode 100644 configs/kontron_sl28_defconfig create mode 100644 include/configs/kontron_sl28.h
arch/arm/Kconfig +11 -0
@@ -1615,6 +1615,16 @@ config TARGET_LS1046AFRWY development platform that supports the QorIQ LS1046A Layerscape Architecture processor. +config TARGET_SL28 + bool "Support sl28" + select ARCH_LS1028A + select ARM64 + select ARMV8_MULTIENTRY + select SUPPORT_SPL + select BINMAN + help + Support for Kontron SMARC-sAL28 board. + config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA
@@ -1962,6 +1972,7 @@ source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" +source "board/kontron/sl28/Kconfig" source "board/myir/mys_6ulx/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig"
arch/arm/dts/Makefile +3 -0
@@ -422,6 +422,9 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1012a-2g5rdb.dtb \ fsl-ls1012a-frdm.dtb \ fsl-ls1012a-frwy.dtb +dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \ + fsl-ls1028a-kontron-sl28-var3.dtb \ + fsl-ls1028a-kontron-sl28-var4.dtb \ dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi new file +135 -0
135 lines not on this page · raw message
arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi new file +2 -0
@@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include "fsl-ls1028a-kontron-sl28-u-boot.dtsi"
arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts new file +15 -0
@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * Copyright (C) 2019 Michael Walle <[email protected]> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28.dts" + +/ { + model = "Kontron SMARC-sAL28 (Single PHY)"; + compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a"; +};
arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi new file +2 -0
@@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include "fsl-ls1028a-kontron-sl28-u-boot.dtsi"
arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts new file +48 -0
48 lines not on this page · raw message
arch/arm/dts/fsl-ls1028a-kontron-sl28.dts new file +189 -0
189 lines not on this page · raw message
board/kontron/sl28/Kconfig new file +18 -0
@@ -0,0 +1,18 @@ +if TARGET_SL28 + +config SYS_BOARD + default "sl28" + +config SYS_VENDOR + default "kontron" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "kontron_sl28" + +config SYS_TEXT_BASE + default 0x96000000 + +endif
board/kontron/sl28/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +Kontron SMARC-sAL28 board +M: Michael Walle <[email protected]> +S: Maintained +F: board/kontron/sl28/ +F: include/configs/kontron_sl28.h +F: configs/kontron_sl28_defconfig
board/kontron/sl28/Makefile new file +8 -0
@@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ + +ifndef CONFIG_SPL_BUILD +obj-y += sl28.o +endif + +obj-y += common.o ddr.o +obj-$(CONFIG_SPL_BUILD) += spl.o
board/kontron/sl28/README new file +63 -0
63 lines not on this page · raw message
board/kontron/sl28/common.c new file +10 -0
@@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <asm/arch-fsl-layerscape/soc.h> + +int board_early_init_f (void ) +{ +fsl_lsch3_early_init_f (); +return 0 ; +}
board/kontron/sl28/ddr.c new file +98 -0
98 lines not on this page · raw message
board/kontron/sl28/sl28.c new file +70 -0
70 lines not on this page · raw message
board/kontron/sl28/spl.c new file +32 -0
@@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <asm/io.h> +#include <asm/spl.h> + +#define DCFG_RCWSR25 0x160 +#define GPINFO_HW_VARIANT_MASK 0xff + +int sl28_variant (void ) +{ +return in_le32 (DCFG_BASE +DCFG_RCWSR25 ) &GPINFO_HW_VARIANT_MASK ; +} + +int board_fit_config_name_match (const char *name) +{ +int variant =sl28_variant (); + +switch (variant) { +case 3 : +return strcmp (name,"fsl-ls1028a-kontron-sl28-var3" ); +case 4 : +return strcmp (name,"fsl-ls1028a-kontron-sl28-var4" ); +default : +return strcmp (name,"fsl-ls1028a-kontron-sl28" ); + } +} + +void board_boot_order (u32 *spl_boot_list) +{ + spl_boot_list[0 ] =BOOT_DEVICE_SPI ; +}
configs/kontron_sl28_defconfig new file +106 -0
106 lines not on this page · raw message
include/configs/kontron_sl28.h new file +125 -0
125 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v5 1/2 board: kontron: add sl28 support
Review
Quoted 3 lines
(quoted diff) +3
-0+/* environment */ +/* allow to overwrite serial and ethaddr */ #define +CONFIG_ENV_OVERWRITE
[...]
Hi Michael,CONFIG_ENV_OVERWRITE is now converted to Kconfig option and has been moved to defconfigs. Adam Ford has a patch doing that and is available in latest master.
-Kuldeep
PATCH v5 2/2 board: sl28: add board specific nvm command
In reply to Michael WalleThe board supports 16 configuration bits which can be manipulated with this command. See the board's README for a detailed explanation on each bit.
--- board/kontron/sl28/Makefile | 2 +- board/kontron/sl28/README | 79 ++++++++++++++++ board/kontron/sl28/cmds.c | 178 ++++++++++++++++++++++++++++++++++++ 3 files changed, 258 insertions(+), 1 deletion(-) create mode 100644 board/kontron/sl28/cmds.c
board/kontron/sl28/Makefile +1 -1
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ ifndef CONFIG_SPL_BUILD -obj-y += sl28.o +obj-y += sl28.o cmds.o endif obj-y += common.o ddr.o
board/kontron/sl28/README +79 -0
85 lines not on this page · raw message
board/kontron/sl28/cmds.c new file +178 -0
178 lines not on this page · raw message
Signature · 1 line
2.20.1