arc: add sparsemem support
v3 cover arc: add sparsemem support
From: Mike Rapoport <[email protected]>
Hi,
This is yet another attempt to enable SPARSEMEM on ARC.
I've boot tested it on nSIM with haps_hs_defconfig with highmem and sparsemem enabled.
With sparsemem the kernel text becomes a bit smaller, but bss and data are slightly increased:
$ size discontig/vmlinux sparse/vmlinux text data bss dec hex filename 4429390 785456 244580 5459426 534de2 discontig/vmlinux 4415099 786224 244844 5446167 531a17 sparse/vmlinux
I've also added a dummy global functions to wrap pfn_valid(), page_to_pfn() and pfn_to_page(). Judging by objdump, sparsemem is a bit more efficient:
DISCONTIGMEM SPARSEMEM
<pfn_to_page>:
seths r2,0x3ffff,r0 lsr r2,r0,0xe mpy r2,r2,1896 mpy r0,r0,0x24 add r3,r2,0x8050066c add3 r2,0x80529d1c,r2 add_s r2,r2,0x80500668 ld_s r2,[r2,0] ld_s r3,[r3,0] bmskn r2,r2,0x3 sub_s r0,r0,r3 j_s.d [blink] ld_s r2,[r2,0] add_s r0,r0,r2 mpy r0,r0,0x24 nop_s j_s.d [blink] add_s r0,r0,r2
<page_to_pfn>:
ld_s r2,[r0,0] ld_s r2,[r0,0] lsr_s r2,r2,0x1f lsr_s r2,r2,0x1b mpy r2,r2,1896 add3 r2,0x80529d1c,r2 add r3,r2,0x80500668 ld_s r2,[r2,0] add_s r2,r2,0x8050066c bmskn r2,r2,0x3 ld_s r3,[r3,0] sub_s r0,r0,r2 sub_s r0,r0,r3 asr_s r0,r0,0x2 ld_s r2,[r2,0] mpy r0,r0,0x38e38e39 asr_s r0,r0,0x2 j_s [blink] mpy r0,r0,0x38e38e39 j_s.d [blink] add_s r0,r0,r2 nop_s
<pfn_valid>:
cmp_s r0,0x3ffff lsr_s r0,r0,0xe mov_s r2,0 brhs.nt r0,0x20,24 mov.ls r2,0x768 add3 r0,0x80529d1c,r0 add_s r2,r2,0x80500814 breq_s r0,0,12 ld.as r3,[r2,-106] ld_s r0,[r0,0] ld.as r2,[r2,-104] j_s.d [blink] add_s r2,r2,r3 xbfu r0,r0,0x1 j_s.d [blink] j_s.d [blink] seths r0,r2,r0 mov_s r0,0 nop_s
Still, SPARSEMEM has an issue with potentially wasted memory allocated for the memory map. The memory maps are allocated for each present section, which means that if part of the section is not populated we'll have a bunch of unused 'struct page' objects. The smaller the section size, the smaller is memory overhead, but the section size cannot be much smaller than the physical address because
MAX_PHYSMEM_BITS - SECTION_SIZE_BITS
has to fit into page flags and the room there is limited.
There is yet another possibility to support separate banks. It is possible to use FLATMEM and free the memmap allocated for the hole, like, for instance, ARM does [1]. This will require ARC's override for pfn_valid() that takes into account the actual memory configuration rather than relies on the memmap.
[1] https://elixir.bootlin.com/linux/latest/source/arch/arm/mm/init.c#L305
Mike Rapoport (1):
arc: add sparsemem support
arch/arc/Kconfig | 10 ++++++++++ arch/arc/include/asm/sparsemem.h | 13 +++++++++++++ arch/arc/mm/init.c | 6 +++++- 3 files changed, 28 insertions(+), 1 deletion(-) create mode 100644 arch/arc/include/asm/sparsemem.h
Signature · 7 lines
2.26.2 _______________________________________________ linux-snps-arc mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-snps-arc
PATCH v3 1/1 arc: add sparsemem support
From: Mike Rapoport <[email protected]>
--- arch/arc/Kconfig | 10 ++++++++++ arch/arc/include/asm/sparsemem.h | 13 +++++++++++++ arch/arc/mm/init.c | 6 +++++- 3 files changed, 28 insertions(+), 1 deletion(-) create mode 100644 arch/arc/include/asm/sparsemem.h
arch/arc/Kconfig +10 -0
@@ -48,6 +48,7 @@ config ARC select PCI_SYSCALL if PCI select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32 + select SPARSEMEM_STATIC if SPARSEMEM config ARCH_HAS_CACHE_LINE_SIZE def_bool y
@@ -67,8 +68,15 @@ config GENERIC_CSUM config ARCH_DISCONTIGMEM_ENABLE def_bool n +config ARCH_SPARSEMEM_ENABLE + def_bool n + config ARCH_FLATMEM_ENABLE def_bool y + depends on !HIGHMEM + +config ARCH_SELECT_MEMORY_MODEL + def_bool n config MMU def_bool y
@@ -508,6 +516,8 @@ config LINUX_RAM_BASE config HIGHMEM bool "High Memory Support" select ARCH_DISCONTIGMEM_ENABLE + select ARCH_SPARSEMEM_ENABLE + select ARCH_SELECT_MEMORY_MODEL help With ARC 2G:2G address split, only upper 2G is directly addressable by kernel. Enable this to potentially allow access to rest of 2G and PAE
arch/arc/include/asm/sparsemem.h new file +13 -0
@@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_ARC_SPARSEMEM_H +#define _ASM_ARC_SPARSEMEM_H + +#ifdef CONFIG_ARC_HAS_PAE40 +#define MAX_PHYSMEM_BITS 40 +#define SECTION_SIZE_BITS 32 +#else +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS 27 +#endif + +#endif /* _ASM_ARC_SPARSEMEM_H */
arch/arc/mm/init.c +5 -1
@@ -153,7 +153,11 @@ void __init setup_arch_memory(void)* DISCONTIGMEM in turns requires multiple nodes. node 0 above is * populated with normal memory zone while node 1 only has highmem */ +#ifdef CONFIG_DISCONTIGMEM node_set_online (1 ); +#elif defined(CONFIG_SPARSEMEM ) +sparse_init (); +#endif min_high_pfn =PFN_DOWN (high_mem_start); max_high_pfn =PFN_DOWN (high_mem_start + high_mem_sz);
@@ -162,7 +166,7 @@ void __init setup_arch_memory(void) high_memory = (void *)(min_high_pfn <<PAGE_SHIFT );kmap_init (); -#endif +#endif /* CONFIG_HIGHMEM */ free_area_init (max_zone_pfn); }
Signature · 7 lines
2.26.2 _______________________________________________ linux-snps-arc mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-snps-arc