Skip to content

arc: add sparsemem support

Mike Rapoport linux-snps-arc lkml 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest1 patch 0 repliesNew
  2. v21 patch 0 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1arc: add sparsemem supportarch/arc/Kconfig arch/arc/include/asm/sparsemem.h arch/arc/mm/init.c+28 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [RFC/RFT PATCH v3 0/1] arc: add sparsemem support

From: Mike Rapoport <[email protected]>

Hi,

This is yet another attempt to enable SPARSEMEM on ARC.

I've boot tested it on nSIM with haps_hs_defconfig with highmem and sparsemem enabled.

With sparsemem the kernel text becomes a bit smaller, but bss and data are slightly increased:

$ size discontig/vmlinux sparse/vmlinux
   text	   data	    bss	    dec	    hex	filename
4429390	 785456	 244580	5459426	 534de2	discontig/vmlinux
4415099	 786224	 244844	5446167	 531a17	sparse/vmlinux

I've also added a dummy global functions to wrap pfn_valid(), page_to_pfn() and pfn_to_page(). Judging by objdump, sparsemem is a bit more efficient:

DISCONTIGMEM SPARSEMEM
<pfn_to_page>:

	seths	r2,0x3ffff,r0		lsr	r2,r0,0xe
	mpy	r2,r2,1896		mpy	r0,r0,0x24
	add	r3,r2,0x8050066c	add3	r2,0x80529d1c,r2
	add_s	r2,r2,0x80500668	ld_s	r2,[r2,0]
	ld_s	r3,[r3,0]		bmskn	r2,r2,0x3
	sub_s	r0,r0,r3		j_s.d	[blink]
	ld_s	r2,[r2,0]		add_s	r0,r0,r2
	mpy	r0,r0,0x24		nop_s
	j_s.d	[blink]
	add_s	r0,r0,r2

<page_to_pfn>:

	ld_s	r2,[r0,0]		ld_s	r2,[r0,0]
	lsr_s	r2,r2,0x1f	 	lsr_s	r2,r2,0x1b
	mpy	r2,r2,1896	 	add3	r2,0x80529d1c,r2
	add	r3,r2,0x80500668 	ld_s	r2,[r2,0]
	add_s	r2,r2,0x8050066c 	bmskn	r2,r2,0x3
	ld_s	r3,[r3,0]	 	sub_s	r0,r0,r2
	sub_s	r0,r0,r3	 	asr_s	r0,r0,0x2
	ld_s	r2,[r2,0]	 	mpy	r0,r0,0x38e38e39
	asr_s	r0,r0,0x2	 	j_s	[blink]
	mpy	r0,r0,0x38e38e39
	j_s.d	[blink]
	add_s	r0,r0,r2
	nop_s

<pfn_valid>:

	cmp_s	r0,0x3ffff		lsr_s	r0,r0,0xe
	mov_s	r2,0			brhs.nt	r0,0x20,24
	mov.ls	r2,0x768		add3	r0,0x80529d1c,r0
	add_s	r2,r2,0x80500814	breq_s	r0,0,12
	ld.as	r3,[r2,-106]		ld_s	r0,[r0,0]
	ld.as	r2,[r2,-104]		j_s.d	[blink]
	add_s	r2,r2,r3		xbfu	r0,r0,0x1
	j_s.d	[blink]			j_s.d	[blink]
	seths	r0,r2,r0		mov_s	r0,0
	nop_s

Still, SPARSEMEM has an issue with potentially wasted memory allocated for the memory map. The memory maps are allocated for each present section, which means that if part of the section is not populated we'll have a bunch of unused 'struct page' objects. The smaller the section size, the smaller is memory overhead, but the section size cannot be much smaller than the physical address because

MAX_PHYSMEM_BITS - SECTION_SIZE_BITS

has to fit into page flags and the room there is limited.

There is yet another possibility to support separate banks. It is possible to use FLATMEM and free the memmap allocated for the hole, like, for instance, ARM does [1]. This will require ARC's override for pfn_valid() that takes into account the actual memory configuration rather than relies on the memmap.

[1] https://elixir.bootlin.com/linux/latest/source/arch/arm/mm/init.c#L305

Mike Rapoport (1):
arc: add sparsemem support

 arch/arc/Kconfig                 | 10 ++++++++++
 arch/arc/include/asm/sparsemem.h | 13 +++++++++++++
 arch/arc/mm/init.c               |  6 +++++-
 3 files changed, 28 insertions(+), 1 deletion(-)
 create mode 100644 arch/arc/include/asm/sparsemem.h
Signature · 7 lines
2.26.2


_______________________________________________
linux-snps-arc mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-snps-arc