Skip to contentSkip to conversation

remove make support in DPDK

PATCH Superseded Ciara Power 24 participants 300 messages Aug 7, 2020 – Oct 22, 2020 Page 3 of 7

Subsystems (12)
lore
Share & tools
lore
#100 lore raw

PATCH v2 33/37 doc: remove references to make in sample app guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/sample_app_ug/bbdev_app.rst        | 34 ++------
 doc/guides/sample_app_ug/cmd_line.rst         |  2 +-
 doc/guides/sample_app_ug/compiling.rst        | 83 +++++++------------
 doc/guides/sample_app_ug/dist_app.rst         |  4 +-
 doc/guides/sample_app_ug/ethtool.rst          |  2 +-
 .../sample_app_ug/eventdev_pipeline.rst       |  3 +-
 doc/guides/sample_app_ug/fips_validation.rst  | 10 +--
 doc/guides/sample_app_ug/flow_classify.rst    |  4 +-
 doc/guides/sample_app_ug/flow_filtering.rst   | 25 +-----
 doc/guides/sample_app_ug/hello_world.rst      |  2 +-
 doc/guides/sample_app_ug/ioat.rst             |  6 +-
 doc/guides/sample_app_ug/ip_frag.rst          |  6 +-
 doc/guides/sample_app_ug/ip_pipeline.rst      |  4 +-
 doc/guides/sample_app_ug/ip_reassembly.rst    |  9 +-
 doc/guides/sample_app_ug/ipsec_secgw.rst      | 14 +---
 doc/guides/sample_app_ug/ipv4_multicast.rst   |  4 +-
 doc/guides/sample_app_ug/keep_alive.rst       |  4 +-
 .../sample_app_ug/kernel_nic_interface.rst    | 14 ++--
 doc/guides/sample_app_ug/l2_forward_cat.rst   |  4 +-
 .../sample_app_ug/l2_forward_crypto.rst       |  4 +-
 doc/guides/sample_app_ug/l2_forward_event.rst | 10 +--
 .../sample_app_ug/l2_forward_job_stats.rst    |  4 +-
 .../sample_app_ug/l2_forward_real_virtual.rst |  6 +-
 doc/guides/sample_app_ug/l3_forward.rst       | 10 +--
 .../sample_app_ug/l3_forward_access_ctrl.rst  |  6 +-
 doc/guides/sample_app_ug/l3_forward_graph.rst |  4 +-
 .../sample_app_ug/l3_forward_power_man.rst    | 14 ++--
 doc/guides/sample_app_ug/link_status_intr.rst |  4 +-
 doc/guides/sample_app_ug/multi_process.rst    | 20 ++---
 doc/guides/sample_app_ug/ntb.rst              |  2 +-
 doc/guides/sample_app_ug/packet_ordering.rst  |  3 +-
 .../sample_app_ug/performance_thread.rst      | 44 +++-------
 doc/guides/sample_app_ug/ptpclient.rst        |  9 +-
 doc/guides/sample_app_ug/qos_metering.rst     |  2 +-
 doc/guides/sample_app_ug/qos_scheduler.rst    | 10 +--
 doc/guides/sample_app_ug/rxtx_callbacks.rst   |  9 +-
 doc/guides/sample_app_ug/server_node_efd.rst  |  2 +-
 doc/guides/sample_app_ug/service_cores.rst    | 23 +----
 doc/guides/sample_app_ug/skeleton.rst         |  2 +-
 doc/guides/sample_app_ug/tep_termination.rst  | 43 +++-------
 doc/guides/sample_app_ug/test_pipeline.rst    |  4 +-
 doc/guides/sample_app_ug/timer.rst            |  2 +-
 doc/guides/sample_app_ug/vdpa.rst             |  4 +-
 doc/guides/sample_app_ug/vhost.rst            | 11 +--
 doc/guides/sample_app_ug/vhost_blk.rst        |  2 +-
 doc/guides/sample_app_ug/vhost_crypto.rst     |  2 +-
 .../sample_app_ug/vm_power_management.rst     | 34 ++++----
 .../sample_app_ug/vmdq_dcb_forwarding.rst     |  8 +-
 doc/guides/sample_app_ug/vmdq_forwarding.rst  |  8 +-
 49 files changed, 194 insertions(+), 346 deletions(-)
doc/guides/sample_app_ug/bbdev_app.rst +8 -26
index 405e706a46..764155f983 100644
@@ -31,30 +31,12 @@ Limitations
 Compiling the Application
 -------------------------
 
-#. DPDK needs to be built with ``baseband_turbo_sw`` PMD driver enabled along
-   with ``FLEXRAN SDK`` Libraries. Refer to *SW Turbo Poll Mode Driver*
-   documentation for more details on this.
+DPDK needs to be built with ``baseband_turbo_sw`` PMD driver enabled along
+with ``FLEXRAN SDK`` Libraries. Refer to *SW Turbo Poll Mode Driver*
+documentation for more details on this.
 
-#. Go to the example directory:
+To compile the sample application see :doc:`compiling`.
 
-    .. code-block:: console
-
-        export RTE_SDK=/path/to/rte_sdk
-        cd ${RTE_SDK}/examples/bbdev_app
-
-#. Set the target (a default target is used if not specified). For example:
-
-    .. code-block:: console
-
-        export RTE_TARGET=x86_64-native-linux-gcc
-
-    See the *DPDK Getting Started Guide* for possible RTE_TARGET values.
-
-#. Build the application:
-
-    .. code-block:: console
-
-        make
 
 Running the Application
 -----------------------
@@ -63,8 +45,8 @@ The application accepts a number of command line options:
 
 .. code-block:: console
 
-    $ ./build/bbdev [EAL options] -- [-e ENCODING_CORES] [-d DECODING_CORES] /
-    [-p ETH_PORT_ID] [-b BBDEV_ID]
+    $ ./<build_dir>/examples/dpdk-bbdev [EAL options] -- [-e ENCODING_CORES] /
+    [-d DECODING_CORES] [-p ETH_PORT_ID] [-b BBDEV_ID]
 
 where:
 
@@ -84,8 +66,8 @@ issue the command:
 
 .. code-block:: console
 
-    $ ./build/bbdev --vdev='baseband_turbo_sw' -w <NIC0PCIADDR> -c 0x38 --socket-mem=2,2 \
-    --file-prefix=bbdev -- -e 0x10 -d 0x20
+    $ ./<build_dir>/examples/dpdk-bbdev --vdev='baseband_turbo_sw' -w <NIC0PCIADDR> \
+    -c 0x38 --socket-mem=2,2 --file-prefix=bbdev -- -e 0x10 -d 0x20
 
 where, NIC0PCIADDR is the PCI address of the Rx port
 
doc/guides/sample_app_ug/cmd_line.rst +1 -1
index 6deb6c8112..5e3a25a317 100644
@@ -52,7 +52,7 @@ To run the application in linux environment, issue the following command:
 
 .. code-block:: console
 
-    $ ./build/cmdline -l 0-3 -n 4
+    $ ./<build_dir>/examples/dpdk-cmdline -l 0-3 -n 4
 
 Refer to the *DPDK Getting Started Guide* for general information on running applications
 and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/compiling.rst +29 -54

129 lines not on this page · raw message

doc/guides/sample_app_ug/dist_app.rst +2 -2
index 90270e3a58..3bd03905c3 100644
@@ -42,7 +42,7 @@ Running the Application
 
    ..  code-block:: console
 
-       ./build/distributor_app [EAL options] -- -p PORTMASK
+       ./<build-dir>/examples/dpdk-distributor [EAL options] -- -p PORTMASK
 
    where,
 
@@ -53,7 +53,7 @@ Running the Application
 
    ..  code-block:: console
 
-       $ ./build/distributor_app -l 1-9,22 -n 4 -- -p f
+       $ ./<build-dir>/examples/dpdk-distributor -l 1-9,22 -n 4 -- -p f
 
 #. Refer to the DPDK Getting Started Guide for general information on running
    applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/ethtool.rst +1 -1
index 253004dd00..7819871917 100644
@@ -24,7 +24,7 @@ The only available options are the standard ones for the EAL:
 
 .. code-block:: console
 
-    ./ethtool-app/${RTE_TARGET}/ethtool [EAL options]
+    ./<build_dir>/examples/dpdk-ethtool [EAL options]
 
 Refer to the *DPDK Getting Started Guide* for general information on
 running applications and the Environment Abstraction Layer (EAL)
doc/guides/sample_app_ug/eventdev_pipeline.rst +2 -1
index dc7972aa9a..b4fc587a09 100644
@@ -46,7 +46,8 @@ these settings is shown below:
 
 .. code-block:: console
 
-    ./build/eventdev_pipeline --vdev event_sw0 -- -r1 -t1 -e4 -w FF00 -s4 -n0 -c32 -W1000 -D
+    ./<build_dir>/examples/dpdk-eventdev_pipeline --vdev event_sw0 -- -r1 -t1 /
+    -e4 -w FF00 -s4 -n0 -c32 -W1000 -D
 
 The application has some sanity checking built-in, so if there is a function
 (e.g.; the RX core) which doesn't have a cpu core mask assigned, the application
doc/guides/sample_app_ug/fips_validation.rst +4 -6
index 2953fddeb9..8b009244b8 100644
@@ -70,9 +70,7 @@ Compiling the Application
 
 * Compile Application
 
-    .. code-block:: console
-
-         make -C examples/fips_validation
+    To compile the sample application see :doc:`compiling`.
 
 *  Run ``dos2unix`` on the request files
 
@@ -92,7 +90,7 @@ The application requires a number of command line options:
 
     .. code-block:: console
 
-         ./fips_validation [EAL options]
+         ./dpdk-fips_validation [EAL options]
          -- --req-file FILE_PATH/FOLDER_PATH
          --rsp-file FILE_PATH/FOLDER_PATH
          [--cryptodev DEVICE_NAME] [--cryptodev-id ID] [--path-is-folder]
@@ -117,7 +115,7 @@ file for crypto_aesni_mb PMD, issue the command:
 
 .. code-block:: console
 
-    $ ./fips_validation --vdev crypto_aesni_mb --
+    $ ./dpdk-fips_validation --vdev crypto_aesni_mb --
     --req-file /PATH/TO/REQUEST/FILE.req --rsp-file ./PATH/TO/RESPONSE/FILE.rsp
     --cryptodev crypto_aesni_mb
 
@@ -126,7 +124,7 @@ data files in one folder for crypto_aesni_gcm PMD, issue the command:
 
 .. code-block:: console
 
-    $ ./fips_validation --vdev crypto_aesni_gcm0 --
+    $ ./dpdk-fips_validation --vdev crypto_aesni_gcm0 --
     --req-file /PATH/TO/REQUEST/FILE/FOLDER/
     --rsp-file ./PATH/TO/RESPONSE/FILE/FOLDER/
     --cryptodev-id 0 --path-is-folder
doc/guides/sample_app_ug/flow_classify.rst +2 -2
index dc40b4d6f9..2ae22739c0 100644
@@ -28,8 +28,8 @@ To run the example in a ``linux`` environment:
 
 .. code-block:: console
 
-    cd ~/dpdk/examples/flow_classify
-    ./build/flow_classify -c 4 -n 4 -- --rule_ipv4="../ipv4_rules_file.txt"
+    ./<build_dir>/examples/dpdk-flow_classify -c 4 -n 4 -- /
+    --rule_ipv4="../ipv4_rules_file.txt"
 
 Please refer to the *DPDK Getting Started Guide*, section
 :doc:`../linux_gsg/build_sample_apps`
doc/guides/sample_app_ug/flow_filtering.rst +2 -23
index 5e5a6cd8a0..4a4006dc8e 100644
@@ -13,28 +13,7 @@ It is intended as a demonstration of the basic components RTE flow rules.
 Compiling the Application
 -------------------------
 
-To compile the application export the path to the DPDK source tree and go to
-the example directory:
-
-.. code-block:: console
-
-    export RTE_SDK=/path/to/rte_sdk
-
-    cd ${RTE_SDK}/examples/flow_filtering
-
-Set the target, for example:
-
-.. code-block:: console
-
-    export RTE_TARGET=x86_64-native-linux-gcc
-
-See the *DPDK Getting Started* Guide for possible ``RTE_TARGET`` values.
-
-Build the application as follows:
-
-.. code-block:: console
-
-    make
+To compile the sample application see :doc:`compiling`.
 
 
 Running the Application
@@ -44,7 +23,7 @@ To run the example in a ``linux`` environment:
 
 .. code-block:: console
 
-    ./build/flow -l 1 -n 1
+    ./<build_dir>/examples/dpdk-flow_filtering -l 1 -n 1
 
 Refer to *DPDK Getting Started Guide* for general information on running
 applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/hello_world.rst +1 -1
index 46f997a7dc..8f48533873 100644
@@ -21,7 +21,7 @@ To run the example in a linux environment:
 
 .. code-block:: console
 
-    $ ./build/helloworld -l 0-3 -n 4
+    $ ./<build_dir>/examples/dpdk-helloworld -l 0-3 -n 4
 
 Refer to *DPDK Getting Started Guide* for general information on running applications
 and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/ioat.rst +3 -3
index bab7654b8d..f35bee9d86 100644
@@ -45,7 +45,7 @@ The application requires a number of command line options:
 
 .. code-block:: console
 
-    ./build/ioatfwd [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
+    ./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
         [--[no-]mac-updating]
 
 where,
@@ -81,7 +81,7 @@ updating issue the command:
 
 .. code-block:: console
 
-    $ ./build/ioatfwd -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
+    $ ./<build_dir>/examples/dpdk-ioat -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
 
 To run the application in a Linux environment with 2 lcores (the master lcore,
 plus one forwarding core), 2 ports (ports 0 and 1), hardware copying and no MAC
@@ -89,7 +89,7 @@ updating issue the command:
 
 .. code-block:: console
 
-    $ ./build/ioatfwd -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
+    $ ./<build_dir>/examples/dpdk-ioat -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
 
 Refer to the *DPDK Getting Started Guide* for general information on
 running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/ip_frag.rst +3 -3
index afeaff3639..92d5e4aeae 100644
@@ -53,7 +53,7 @@ Application usage:
 
 .. code-block:: console
 
-    ./build/ip_fragmentation [EAL options] -- -p PORTMASK [-q NQ]
+    ./<build_dir>/examples/dpdk-ip_fragmentation [EAL options] -- -p PORTMASK [-q NQ]
 
 where:
 
@@ -65,7 +65,7 @@ To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) wi
 
 .. code-block:: console
 
-    ./build/ip_fragmentation -l 2,4 -n 3 -- -p 5
+    ./<build_dir>/examples/dpdk-ip_fragmentation -l 2,4 -n 3 -- -p 5
     EAL: coremask set to 14
     EAL: Detected lcore 0 on socket 0
     EAL: Detected lcore 1 on socket 1
@@ -94,7 +94,7 @@ To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with
 
 .. code-block:: console
 
-    ./build/ip_fragmentation -l 4 -n 3 -- -p 5 -q 2
+    ./<build_dir>/examples/dpdk-ip_fragmentation -l 4 -n 3 -- -p 5 -q 2
 
 To test the application, flows should be set up in the flow generator that match the values in the
 l3fwd_ipv4_route_array and/or l3fwd_ipv6_route_array table.
doc/guides/sample_app_ug/ip_pipeline.rst +2 -2
index 56014be174..1d8656c637 100644
@@ -34,7 +34,7 @@ Running the application
 
 The application startup command line is::
 
-   ip_pipeline [EAL_ARGS] -- [-s SCRIPT_FILE] [-h HOST] [-p PORT]
+   dpdk-ip_pipeline [EAL_ARGS] -- [-s SCRIPT_FILE] [-h HOST] [-p PORT]
 
 The application startup arguments are:
 
@@ -71,7 +71,7 @@ The following is an example command to run ip pipeline application configured fo
 
 .. code-block:: console
 
-    $ ./build/ip_pipeline -c 0x3 -- -s examples/route_ecmp.cli
+    $ ./<build_dir>/examples/dpdk-ip_pipeline -c 0x3 -- -s examples/route_ecmp.cli
 
 The application should start successfully and display as follows:
 
doc/guides/sample_app_ug/ip_reassembly.rst +5 -4
index f34b9d0055..e72c8492e9 100644
@@ -42,7 +42,7 @@ The application has a number of command line options:
 
 .. code-block:: console
 
-    ./build/ip_reassembly [EAL options] -- -p PORTMASK [-q NQ] [--maxflows=FLOWS>] [--flowttl=TTL[(s|ms)]]
+    ./<build_dir>/examples/dpdk-ip_reassembly [EAL options] -- -p PORTMASK [-q NQ] [--maxflows=FLOWS>] [--flowttl=TTL[(s|ms)]]
 
 where:
 
@@ -61,7 +61,7 @@ To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) wi
 
 .. code-block:: console
 
-    ./build/ip_reassembly -l 2,4 -n 3 -- -p 5
+    ./<build_dir>/examples/dpdk-ip_reassembly -l 2,4 -n 3 -- -p 5
     EAL: coremask set to 14
     EAL: Detected lcore 0 on socket 0
     EAL: Detected lcore 1 on socket 1
@@ -92,7 +92,7 @@ To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with
 
 .. code-block:: console
 
-    ./build/ip_reassembly -l 4 -n 3 -- -p 5 -q 2
+    ./<build_dir>/examples/dpdk-ip_reassembly -l 4 -n 3 -- -p 5 -q 2
 
 To test the application, flows should be set up in the flow generator that match the values in the
 l3fwd_ipv4_route_array and/or l3fwd_ipv6_route_array table.
@@ -231,7 +231,8 @@ Debug logging and Statistics Collection
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The RTE_LIBRTE_IP_FRAG_TBL_STAT controls statistics collection for the IP Fragment Table.
-This macro is disabled by default.
+This macro is disabled by default, but it can be enabled by modifying the appropriate line
+in ``config/rte_config.h``.
 To make ip_reassembly print the statistics to the standard output,
 the user must send either an USR1, INT or TERM signal to the process.
 For all of these signals, the ip_reassembly process prints Fragment table statistics for each RX queue,
doc/guides/sample_app_ug/ipsec_secgw.rst +4 -10
index 434f484138..1f37dccf8b 100644
@@ -116,12 +116,6 @@ To compile the sample application see :doc:`compiling`.
 
 The application is located in the ``ipsec-secgw`` sub-directory.
 
-#. [Optional] Build the application for debugging:
-   This option adds some extra flags, disables compiler optimizations and
-   is verbose::
-
-       make DEBUG=1
-
 
 Running the Application
 -----------------------
@@ -129,7 +123,7 @@ Running the Application
 The application has a number of command line options::
 
 
-   ./build/ipsec-secgw [EAL options] --
+   ./<build_dir>/examples/dpdk-ipsec-secgw [EAL options] --
                         -p PORTMASK -P -u PORTMASK -j FRAMESIZE
                         -l -w REPLAY_WINOW_SIZE -e -a
                         -c SAD_CACHE_SIZE
@@ -245,7 +239,7 @@ The mapping of lcores to port/queues is similar to other l3fwd applications.
 
 For example, given the following command line to run application in poll mode::
 
-    ./build/ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048       \
+    ./<build_dir>/examples/dpdk-ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048       \
            --vdev "crypto_null" -- -p 0xf -P -u 0x3             \
            --config="(0,0,20),(1,0,20),(2,0,21),(3,0,21)"       \
            -f /path/to/config_file --transfer-mode poll         \
@@ -297,7 +291,7 @@ where each option means:
 Similarly for example, given the following command line to run application in
 event app mode::
 
-    ./build/ipsec-secgw -c 0x3 -- -P -p 0x3 -u 0x1       \
+    ./<build_dir>/examples/dpdk-ipsec-secgw -c 0x3 -- -P -p 0x3 -u 0x1       \
            -f /path/to/config_file --transfer-mode event \
            --event-schedule-type parallel                \
 
@@ -336,7 +330,7 @@ For example, something like the following command line:
 
 .. code-block:: console
 
-    ./build/ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \
+    ./<build_dir>/examples/dpdk-ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \
             -w 81:00.0 -w 81:00.1 -w 81:00.2 -w 81:00.3 \
             --vdev "crypto_aesni_mb" --vdev "crypto_null" \
 	    -- \
doc/guides/sample_app_ug/ipv4_multicast.rst +2 -2
index 8923a7f548..7c6e8b15cc 100644
@@ -50,7 +50,7 @@ The application has a number of command line options:
 
 .. code-block:: console
 
-    ./build/ipv4_multicast [EAL options] -- -p PORTMASK [-q NQ]
+    ./<build_dir>/examples/dpdk-ipv4_multicast [EAL options] -- -p PORTMASK [-q NQ]
 
 where,
 
@@ -67,7 +67,7 @@ Typically, to run the IPv4 Multicast sample application, issue the following com
 
 .. code-block:: console
 
-    ./build/ipv4_multicast -l 0-3 -n 3 -- -p 0x3 -q 1
+    ./<build_dir>/examples/dpdk-ipv4_multicast -l 0-3 -n 3 -- -p 0x3 -q 1
 
 In this command:
 
doc/guides/sample_app_ug/keep_alive.rst +2 -2
index 865ba69e5c..ef7936f80f 100644
@@ -49,7 +49,7 @@ The application has a number of command line options:
 
 .. code-block:: console
 
-    ./build/l2fwd-keepalive [EAL options] \
+    ./<build_dir>/examples/dpdk-l2fwd-keepalive [EAL options] \
             -- -p PORTMASK [-q NQ] [-K PERIOD] [-T PERIOD]
 
 where,
@@ -68,7 +68,7 @@ To run the application in linux environment with 4 lcores, 16 ports
 
 .. code-block:: console
 
-    ./build/l2fwd-keepalive -l 0-3 -n 4 -- -q 8 -p ffff -K 10
+    ./<build_dir>/examples/dpdk-l2fwd-keepalive -l 0-3 -n 4 -- -q 8 -p ffff -K 10
 
 Refer to the *DPDK Getting Started Guide* for general information on
 running applications and the Environment Abstraction Layer (EAL)
doc/guides/sample_app_ug/kernel_nic_interface.rst +7 -7
index aac4ebd8d4..ef441cc1e5 100644
@@ -96,7 +96,7 @@ The ``kni`` example application requires a number of command line options:
 
 .. code-block:: console
 
-    kni [EAL options] -- -p PORTMASK --config="(port,lcore_rx,lcore_tx[,lcore_kthread,...])[,(port,lcore_rx,lcore_tx[,lcore_kthread,...])]" [-P] [-m]
+    dpdk-kni [EAL options] -- -p PORTMASK --config="(port,lcore_rx,lcore_tx[,lcore_kthread,...])[,(port,lcore_rx,lcore_tx[,lcore_kthread,...])]" [-P] [-m]
 
 Where:
 
@@ -168,8 +168,8 @@ interface ``vEth1_0`` with the kernel thread bound to lcore 9.
 .. code-block:: console
 
     # rmmod rte_kni
-    # insmod kmod/rte_kni.ko kthread_mode=multiple
-    # ./build/kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8),(1,5,7,9)"
+    # insmod <build_dir>/kernel/linux/kni/rte_kni.ko kthread_mode=multiple
+    # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8),(1,5,7,9)"
 
 The following example is identical, except an additional ``lcore_kthread``
 core is specified per physical port.  In this case, ``kni`` will create
@@ -186,8 +186,8 @@ The kernel thread for each interface will be bound as follows:
 .. code-block:: console
 
     # rmmod rte_kni
-    # insmod kmod/rte_kni.ko kthread_mode=multiple
-    # ./build/kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8,10),(1,5,7,9,11)"
+    # insmod <build_dir>/kernel/linux/kni/rte_kni.ko kthread_mode=multiple
+    # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8,10),(1,5,7,9,11)"
 
 The following example can be used to test the interface between the ``kni``
 test application and the ``rte_kni`` kernel module.  In this example,
@@ -206,8 +206,8 @@ disabled by **not** specifying the ``-m`` flag to ``kni``:
 .. code-block:: console
 
     # rmmod rte_kni
-    # insmod kmod/rte_kni.ko lo_mode=lo_mode_fifo carrier=on
-    # ./build/kni -l 4-7 -n 4 -- -P -p 0x3 --config="(0,4,6,8),(1,5,7,9)"
+    # insmod <build_dir>/kernel/linux/kni/rte_kni.ko lo_mode=lo_mode_fifo carrier=on
+    # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 --config="(0,4,6,8),(1,5,7,9)"
 
 KNI Operations
 --------------
doc/guides/sample_app_ug/l2_forward_cat.rst +2 -2
index 0a813200ba..c1be2d7dff 100644
@@ -70,13 +70,13 @@ To run the example in a ``linux`` environment and enable CAT on cpus 0-2:
 
 .. code-block:: console
 
-    ./build/l2fwd-cat -l 1 -n 4 -- --l3ca="0x3@(0-2)"
+    ./<build_dir>/examples/dpdk-l2fwd-cat -l 1 -n 4 -- --l3ca="0x3@(0-2)"
 
 or to enable CAT and CDP on cpus 1,3:
 
 .. code-block:: console
 
-    ./build/l2fwd-cat -l 1 -n 4 -- --l3ca="(0x00C00,0x00300)@(1,3)"
+    ./<build_dir>/examples/dpdk-l2fwd-cat -l 1 -n 4 -- --l3ca="(0x00C00,0x00300)@(1,3)"
 
 If CDP is not supported it will fail with following error message:
 
doc/guides/sample_app_ug/l2_forward_crypto.rst +2 -2
index 962752f21c..e2c0f9f1ec 100644
@@ -39,7 +39,7 @@ The application requires a number of command line options:
 
 .. code-block:: console
 
-    ./build/l2fwd-crypto [EAL options] -- [-p PORTMASK] [-q NQ] [-s] [-T PERIOD] /
+    ./<build_dir>/examples/dpdk-l2fwd-crypto [EAL options] -- [-p PORTMASK] [-q NQ] [-s] [-T PERIOD] /
     [--cdev_type HW/SW/ANY] [--chain HASH_CIPHER/CIPHER_HASH/CIPHER_ONLY/HASH_ONLY/AEAD] /
     [--cipher_algo ALGO] [--cipher_op ENCRYPT/DECRYPT] [--cipher_key KEY] /
     [--cipher_key_random_size SIZE] [--cipher_iv IV] [--cipher_iv_random_size SIZE] /
@@ -162,7 +162,7 @@ To run the application in linux environment with 2 lcores, 2 ports and 2 crypto
 
 .. code-block:: console
 
-    $ ./build/l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_aesni_mb0" \
+    $ ./<build_dir>/examples/dpdk-l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_aesni_mb0" \
     --vdev "crypto_aesni_mb1" -- -p 0x3 --chain CIPHER_HASH \
     --cipher_op ENCRYPT --cipher_algo aes-cbc \
     --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f \
doc/guides/sample_app_ug/l2_forward_event.rst +5 -5
index d536eee819..11c9d4b2ee 100644
@@ -52,7 +52,7 @@ The application requires a number of command line options:
 
 .. code-block:: console
 
-    ./build/l2fwd-event [EAL options] -- -p PORTMASK [-q NQ] --[no-]mac-updating --mode=MODE --eventq-sched=SCHED_MODE
+    ./<build_dir>/examples/dpdk-l2fwd-event [EAL options] -- -p PORTMASK [-q NQ] --[no-]mac-updating --mode=MODE --eventq-sched=SCHED_MODE
 
 where,
 
@@ -75,20 +75,20 @@ issue the command:
 
 .. code-block:: console
 
-    ./build/l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=poll
+    ./<build_dir>/examples/dpdk-l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=poll
 
 Eventdev mode with 4 lcores, 16 ports , sched method ordered and MAC address updating enabled,
 issue the command:
 
 .. code-block:: console
 
-    ./build/l2fwd-event -l 0-3 -n 4 -- -p ffff --eventq-sched=ordered
+    ./<build_dir>/examples/dpdk-l2fwd-event -l 0-3 -n 4 -- -p ffff --eventq-sched=ordered
 
 or
 
 .. code-block:: console
 
-    ./build/l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered
+    ./<build_dir>/examples/dpdk-l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered
 
 Refer to the *DPDK Getting Started Guide* for general information on running
 applications and the Environment Abstraction Layer (EAL) options.
@@ -105,7 +105,7 @@ scheduler. Following is the sample command:
 
 .. code-block:: console
 
-    ./build/l2fwd-event -l 0-7 -s 0-3 -n 4 --vdev event_sw0 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered
+    ./<build_dir>/examples/dpdk-l2fwd-event -l 0-7 -s 0-3 -n 4 --vdev event_sw0 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered
 
 Explanation
 -----------
doc/guides/sample_app_ug/l2_forward_job_stats.rst +2 -2
index 8d0c38721f..1a854abb23 100644
@@ -81,7 +81,7 @@ The application requires a number of command line options:
 
 .. code-block:: console
 
-    ./build/l2fwd-jobstats [EAL options] -- -p PORTMASK [-q NQ] [-l]
+    ./<build_dir>/examples/dpdk-l2fwd-jobstats [EAL options] -- -p PORTMASK [-q NQ] [-l]
 
 where,
 
@@ -96,7 +96,7 @@ thousands  separator printing, issue the command:
 
 .. code-block:: console
 
-    $ ./build/l2fwd-jobstats -l 0-3 -n 4 -- -q 8 -p ffff -l
+    $ ./<build_dir>/examples/dpdk-l2fwd-jobstats -l 0-3 -n 4 -- -q 8 -p ffff -l
 
 Refer to the *DPDK Getting Started Guide* for general information on running applications
 and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/l2_forward_real_virtual.rst +3 -3
index c0e8488e79..5a13de215e 100644
@@ -91,7 +91,7 @@ The application requires a number of command line options:
 
 .. code-block:: console
 
-    ./build/l2fwd [EAL options] -- -p PORTMASK
+    ./<build_dir>/examples/dpdk-l2fwd [EAL options] -- -p PORTMASK
                                    [-q NQ]
                                    --[no-]mac-updating
                                    [--portmap="(port, port)[,(port, port)]"]
@@ -111,7 +111,7 @@ updating enabled, issue the command:
 
 .. code-block:: console
 
-    $ ./build/l2fwd -l 0-3 -n 4 -- -q 8 -p ffff
+    $ ./<build_dir>/examples/dpdk-l2fwd -l 0-3 -n 4 -- -q 8 -p ffff
 
 To run the application in linux environment with 4 lcores, 4 ports, 8 RX queues
 per lcore, to forward RX traffic of ports 0 & 1 on ports 2 & 3 respectively and
@@ -119,7 +119,7 @@ vice versa, issue the command:
 
 .. code-block:: console
 
-    $ ./build/l2fwd -l 0-3 -n 4 -- -q 8 -p f --portmap="(0,2)(1,3)"
+    $ ./<build_dir>/examples/dpdk-l2fwd -l 0-3 -n 4 -- -q 8 -p f --portmap="(0,2)(1,3)"
 
 Refer to the *DPDK Getting Started Guide* for general information on running applications
 and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/l3_forward.rst +5 -5
index 07c8d44936..7acbd7404e 100644
@@ -51,7 +51,7 @@ Running the Application
 
 The application has a number of command line options::
 
-    ./l3fwd [EAL options] -- -p PORTMASK
+    ./dpdk-l3fwd [EAL options] -- -p PORTMASK
                              [-P]
                              [-E]
                              [-L]
@@ -111,7 +111,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s
 
 .. code-block:: console
 
-    ./build/l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)"
+    ./<build_dir>/examples/dpdk-l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)"
 
 In this command:
 
@@ -138,13 +138,13 @@ Following is the sample command:
 
 .. code-block:: console
 
-    ./build/l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x3 --eventq-sched=ordered
+    ./<build_dir>/examples/dpdk-l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x3 --eventq-sched=ordered
 
 or
 
 .. code-block:: console
 
-    ./build/l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x03 --mode=eventdev --eventq-sched=ordered
+    ./<build_dir>/examples/dpdk-l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x03 --mode=eventdev --eventq-sched=ordered
 
 In this command:
 
@@ -166,7 +166,7 @@ scheduler. Following is the sample command:
 
 .. code-block:: console
 
-    ./build/l3fwd -l 0-7 -s 0xf0000 -n 4 --vdev event_sw0 -- -p 0x3 --mode=eventdev --eventq-sched=ordered
+    ./<build_dir>/examples/dpdk-l3fwd -l 0-7 -s 0xf0000 -n 4 --vdev event_sw0 -- -p 0x3 --mode=eventdev --eventq-sched=ordered
 
 In case of eventdev mode, *--config* option is not used for ethernet port
 configuration. Instead each ethernet port will be configured with mentioned
doc/guides/sample_app_ug/l3_forward_access_ctrl.rst +3 -3
index a44fbcd52c..d3c901f8d8 100644
@@ -184,7 +184,7 @@ Packet 2 matches Rule 2 and is forwarded to port 1.
 Packet 3 matches Rule 3 and is forwarded to port 0.
 
 For more details on the rule file format,
-please refer to rule_ipv4.db and rule_ipv6.db files (inside <RTE_SDK>/examples/l3fwd-acl/).
+please refer to rule_ipv4.db and rule_ipv6.db files (inside dpdk/examples/l3fwd-acl/).
 
 Application Phases
 ~~~~~~~~~~~~~~~~~~
@@ -236,7 +236,7 @@ The application has a number of command line options:
 
 ..  code-block:: console
 
-    ./build/l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa]
+    ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa]
 
 
 where,
@@ -268,7 +268,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s
 
 ..  code-block:: console
 
-    ./build/l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --scalar
+    ./<build_dir>/examples/dpdk-l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --scalar
 
 In this command:
 
doc/guides/sample_app_ug/l3_forward_graph.rst +2 -2
index df50827bab..75617e3af1 100644
@@ -44,7 +44,7 @@ Running the Application
 
 The application has a number of command line options similar to l3fwd::
 
-    ./l3fwd-graph [EAL options] -- -p PORTMASK
+    ./dpdk-l3fwd-graph [EAL options] -- -p PORTMASK
                                    [-P]
                                    --config(port,queue,lcore)[,(port,queue,lcore)]
                                    [--eth-dest=X,MM:MM:MM:MM:MM:MM]
@@ -79,7 +79,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s
 
 .. code-block:: console
 
-    ./build/l3fwd-graph -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)"
+    ./<build_dir>/examples/dpdk-l3fwd-graph -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)"
 
 In this command:
 
doc/guides/sample_app_ug/l3_forward_power_man.rst +5 -9
index 0cc6f2e62e..4f997108ba 100644
@@ -88,7 +88,7 @@ The application has a number of command line options:
 
 .. code-block:: console
 
-    ./build/l3fwd_power [EAL options] -- -p PORTMASK [-P]  --config(port,queue,lcore)[,(port,queue,lcore)] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa]
+    ./<build_dir>/examples/dpdk-l3fwd_power [EAL options] -- -p PORTMASK [-P]  --config(port,queue,lcore)[,(port,queue,lcore)] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa]
 
 where,
 
@@ -378,7 +378,7 @@ See :doc:`Power Management<../prog_guide/power_man>` chapter in the DPDK Program
 
 .. code-block:: console
 
-    ./l3fwd-power -l xxx   -n 4   -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3 -P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1
+    ./<build_dir>/examples/dpdk-l3fwd-power -l xxx   -n 4   -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3 -P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1
 
 Where,
 
@@ -407,7 +407,7 @@ app with the training flag set to “1”, and the other parameters set to
 
 .. code-block:: console
 
-        ./examples/l3fwd-power/build/l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "1,0,0" –P
+        ./<build_dir>/examples/dpdk-l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "1,0,0" –P
 
 This will run the training algorithm for x seconds on each core (cores 2
 and 3), and then print out the recommended threshold values for those
@@ -432,7 +432,7 @@ then be started without the training mode so traffic can start immediately.
 
 .. code-block:: console
 
-        ./examples/l3fwd-power/build/l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "0,340000,540000" –P
+        ./<build_dir>/examples/dpdk-l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "0,340000,540000" –P
 
 Telemetry Mode
 --------------
@@ -449,13 +449,9 @@ cycles it took is measured and compared with minimum and maximum
 reference cycles and accordingly busy rate is set  to either 0% or
 50% or 100%.
 
-   .. Note::
-
-      * The CONFIG_RTE_LIBRTE_TELEMETRY should be set in order to get the stats in DPDK telemetry.
-
 .. code-block:: console
 
-        ./examples/l3fwd-power/build/l3fwd-power --telemetry -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --telemetry
+        ./<build_dir>/examples/dpdk-l3fwd-power --telemetry -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --telemetry
 
 The new stats ``empty_poll`` , ``full_poll`` and ``busy_percent`` can be viewed by running the script
 ``/usertools/dpdk-telemetry-client.py`` and selecting the menu option ``Send for global Metrics``.
doc/guides/sample_app_ug/link_status_intr.rst +2 -2
index 04c40f2854..75bfd78505 100644
@@ -39,7 +39,7 @@ The application requires a number of command line options:
 
 .. code-block:: console
 
-    ./build/link_status_interrupt [EAL options] -- -p PORTMASK [-q NQ][-T PERIOD]
+    ./<build_dir>/examples/dpdk-link_status_interrupt [EAL options] -- -p PORTMASK [-q NQ][-T PERIOD]
 
 where,
 
@@ -54,7 +54,7 @@ issue the command:
 
 .. code-block:: console
 
-    $ ./build/link_status_interrupt -l 0-3 -n 4-- -q 8 -p ffff
+    $ ./<build_dir>/examples/dpdk-link_status_interrupt -l 0-3 -n 4-- -q 8 -p ffff
 
 Refer to the *DPDK Getting Started Guide* for general information on running applications
 and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/multi_process.rst +10 -10
index f2a79a6397..8b2858b971 100644
@@ -41,7 +41,7 @@ passing at least two cores in the coremask/corelist, as follows:
 
 .. code-block:: console
 
-    ./build/simple_mp -l 0-1 -n 4 --proc-type=primary
+    ./<build_dir>/examples/dpdk-simple_mp -l 0-1 -n 4 --proc-type=primary
 
 For the first DPDK process run, the proc-type flag can be omitted or set to auto,
 since all DPDK processes will default to being a primary instance,
@@ -50,7 +50,7 @@ The process should start successfully and display a command prompt as follows:
 
 .. code-block:: console
 
-    $ ./build/simple_mp -l 0-1 -n 4 --proc-type=primary
+    $ ./<build_dir>/examples/dpdk-simple_mp -l 0-1 -n 4 --proc-type=primary
     EAL: coremask set to 3
     EAL: Detected lcore 0 on socket 0
     EAL: Detected lcore 1 on socket 0
@@ -78,7 +78,7 @@ again run the same binary setting at least two cores in the coremask/corelist:
 
 .. code-block:: console
 
-    ./build/simple_mp -l 2-3 -n 4 --proc-type=secondary
+    ./<build_dir>/examples/dpdk-simple_mp -l 2-3 -n 4 --proc-type=secondary
 
 When running a secondary process such as that shown above, the proc-type parameter can again be specified as auto.
 However, omitting the parameter altogether will cause the process to try and start as a primary rather than secondary process.
@@ -184,10 +184,10 @@ the following commands can be used (assuming run as root):
 
 .. code-block:: console
 
-    # ./build/symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0
-    # ./build/symmetric_mp -l 2 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1
-    # ./build/symmetric_mp -l 3 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2
-    # ./build/symmetric_mp -l 4 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3
+    # ./<build_dir>/examples/dpdk-symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0
+    # ./<build_dir>/examples/dpdk-symmetric_mp -l 2 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1
+    # ./<build_dir>/examples/dpdk-symmetric_mp -l 3 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2
+    # ./<build_dir>/examples/dpdk-symmetric_mp -l 4 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3
 
 .. note::
 
@@ -284,9 +284,9 @@ the following commands could be used:
 
 .. code-block:: console
 
-    # ./mp_server/build/mp_server -l 1-2 -n 4 -- -p 3 -n 2
-    # ./mp_client/build/mp_client -l 3 -n 4 --proc-type=auto -- -n 0
-    # ./mp_client/build/mp_client -l 4 -n 4 --proc-type=auto -- -n 1
+    # ./<build_dir>/examples/dpdk-mp_server -l 1-2 -n 4 -- -p 3 -n 2
+    # ./<build_dir>/examples/dpdk-mp_client -l 3 -n 4 --proc-type=auto -- -n 0
+    # ./<build_dir>/examples/dpdk-mp_client -l 4 -n 4 --proc-type=auto -- -n 1
 
 .. note::
 
doc/guides/sample_app_ug/ntb.rst +1 -1
index 93fb752f25..f80b221db7 100644
@@ -32,7 +32,7 @@ The only available options are the standard ones for the EAL:
 
 .. code-block:: console
 
-    ./build/ntb_fwd -c 0xf -n 6 -- -i
+    ./<build_dir>/examples/dpdk-ntb -c 0xf -n 6 -- -i
 
 Refer to the *DPDK Getting Started Guide* for general information on
 running applications and the Environment Abstraction Layer (EAL)
doc/guides/sample_app_ug/packet_ordering.rst +2 -1
index 1c8ee5d040..5a4e0a9d28 100644
@@ -43,7 +43,8 @@ The application execution command line is:
 
 .. code-block:: console
 
-    ./packet_ordering [EAL options] -- -p PORTMASK [--disable-reorder] [--insight-worker]
+    ./<build_dir>/examples/dpdk-packet_ordering [EAL options] -- -p PORTMASK /
+    [--disable-reorder] [--insight-worker]
 
 The -c EAL CPU_COREMASK option has to contain at least 3 CPU cores.
 The first CPU core in the core mask is the master core and would be assigned to
doc/guides/sample_app_ug/performance_thread.rst +13 -31

121 lines not on this page · raw message

doc/guides/sample_app_ug/ptpclient.rst +1 -8
index 12b4f13d5b..a58b6f35bf 100644
@@ -57,13 +57,6 @@ To compile the sample application see :doc:`compiling`.
 
 The application is located in the ``ptpclient`` sub-directory.
 
-.. note::
-   To compile the application edit the ``config/common_linux`` configuration file to enable IEEE1588
-   and then recompile DPDK:
-
-   .. code-block:: console
-
-      CONFIG_RTE_LIBRTE_IEEE1588=y
 
 Running the Application
 -----------------------
@@ -72,7 +65,7 @@ To run the example in a ``linux`` environment:
 
 .. code-block:: console
 
-    ./build/ptpclient -l 1 -n 4 -- -p 0x1 -T 0
+    ./<build_dir>/examples/dpdk-ptpclient -l 1 -n 4 -- -p 0x1 -T 0
 
 Refer to *DPDK Getting Started Guide* for general information on running
 applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/qos_metering.rst +1 -1
index d75f7da52c..6b6853a0e9 100644
@@ -48,7 +48,7 @@ The application execution command line is as below:
 
 .. code-block:: console
 
-    ./qos_meter [EAL options] -- -p PORTMASK
+    ./dpdk-qos_meter [EAL options] -- -p PORTMASK
 
 The application is constrained to use a single core in the EAL core mask and 2 ports only in the application port mask
 (first port from the port mask is used for RX and the other port in the core mask is used for TX).
doc/guides/sample_app_ug/qos_scheduler.rst +5 -5
index b5010657a7..801f5e1286 100644
@@ -42,8 +42,8 @@ The application is located in the ``qos_sched`` sub-directory.
 .. note::
 
     To get statistics on the sample app using the command line interface as described in the next section,
-    DPDK must be compiled defining *CONFIG_RTE_SCHED_COLLECT_STATS*,
-    which can be done by changing the configuration file for the specific target to be compiled.
+    DPDK must be compiled defining *RTE_SCHED_COLLECT_STATS*, which can be done by changing the relevant
+    entry in the ``config/rte_config.h`` file.
 
 Running the Application
 -----------------------
@@ -57,7 +57,7 @@ The application has a number of command line options:
 
 .. code-block:: console
 
-    ./qos_sched [EAL options] -- <APP PARAMS>
+    ./<build_dir>/examples/dpdk-qos_sched [EAL options] -- <APP PARAMS>
 
 Mandatory application parameters include:
 
@@ -315,7 +315,7 @@ The following is an example command with a single packet flow configuration:
 
 .. code-block:: console
 
-    ./qos_sched -l 1,5,7 -n 4 -- --pfc "3,2,5,7" --cfg ./profile.cfg
+    ./<build_dir>/examples/dpdk-qos_sched -l 1,5,7 -n 4 -- --pfc "3,2,5,7" --cfg ./profile.cfg
 
 This example uses a single packet flow configuration which creates one RX thread on lcore 5 reading
 from port 3 and a worker thread on lcore 7 writing to port 2.
@@ -324,7 +324,7 @@ Another example with 2 packet flow configurations using different ports but shar
 
 .. code-block:: console
 
-   ./qos_sched -l 1,2,6,7 -n 4 -- --pfc "3,2,2,6,7" --pfc "1,0,2,6,7" --cfg ./profile.cfg
+   ./<build_dir>/examples/dpdk-qos_sched -l 1,2,6,7 -n 4 -- --pfc "3,2,2,6,7" --pfc "1,0,2,6,7" --cfg ./profile.cfg
 
 Note that independent cores for the packet flow configurations for each of the RX, WT and TX thread are also supported,
 providing flexibility to balance the work.
doc/guides/sample_app_ug/rxtx_callbacks.rst +1 -8
index 0a69ec71ab..62d1f39d7e 100644
@@ -25,13 +25,6 @@ To compile the sample application see :doc:`compiling`.
 
 The application is located in the ``rxtx_callbacks`` sub-directory.
 
-The callbacks feature requires that the ``CONFIG_RTE_ETHDEV_RXTX_CALLBACKS``
-setting is on in the ``config/common_`` config file that applies to the
-target. This is generally on by default:
-
-.. code-block:: console
-
-    CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
 
 Running the Application
 -----------------------
@@ -40,7 +33,7 @@ To run the example in a ``linux`` environment:
 
 .. code-block:: console
 
-    ./build/rxtx_callbacks -l 1 -n 4 -- [-t]
+    ./<build_dir>/examples/dpdk-rxtx_callbacks -l 1 -n 4 -- [-t]
 
 Use -t to enable hardware timestamping. If not supported by the NIC, an error
 will be displayed.
doc/guides/sample_app_ug/server_node_efd.rst +1 -1
index 12208f4258..f27d1ccfce 100644
@@ -93,7 +93,7 @@ and the back-end node.
 
 The frontend server (server) has the following command line options::
 
-    ./server [EAL options] -- -p PORTMASK -n NUM_NODES -f NUM_FLOWS
+    ./<build_dir>/examples/dpdk-server [EAL options] -- -p PORTMASK -n NUM_NODES -f NUM_FLOWS
 
 Where,
 
doc/guides/sample_app_ug/service_cores.rst +3 -20
index cd0f4717aa..9202be6ea9 100644
@@ -20,26 +20,9 @@ is application specific, and not a part of the service cores API.
 Compiling the Application
 -------------------------
 
-#.  Go to the example directory:
+To compile the sample application see :doc:`compiling`.
 
-    .. code-block:: console
-
-        export RTE_SDK=/path/to/rte_sdk
-        cd ${RTE_SDK}/examples/service_cores
-
-#.  Set the target (a default target is used if not specified). For example:
-
-    .. code-block:: console
-
-        export RTE_TARGET=x86_64-native-linux-gcc
-
-    See the *DPDK Getting Started* Guide for possible RTE_TARGET values.
-
-#.  Build the application:
-
-    .. code-block:: console
-
-        make
+The application is located in the ``service_cores`` sub-directory.
 
 Running the Application
 -----------------------
@@ -50,7 +33,7 @@ pass a service core-mask as an EAL argument at startup time.
 
 .. code-block:: console
 
-    $ ./build/service_cores
+    $ ./<build_dir>/examples/dpdk-service_cores
 
 
 Explanation
doc/guides/sample_app_ug/skeleton.rst +1 -1
index 34f6f9aea7..263d8debc8 100644
@@ -25,7 +25,7 @@ To run the example in a ``linux`` environment:
 
 .. code-block:: console
 
-    ./build/basicfwd -l 1 -n 4
+    ./<build_dir>/examples/dpdk-skeleton -l 1 -n 4
 
 Refer to *DPDK Getting Started Guide* for general information on running
 applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/tep_termination.rst +12 -31

97 lines not on this page · raw message

doc/guides/sample_app_ug/test_pipeline.rst +2 -2
index 5aefd8d89f..d57d08fb2c 100644
@@ -32,7 +32,7 @@ Compiling the Application
 -------------------------
 To compile the sample application see :doc:`compiling`
 
-The application is located in the ``$RTE_SDK/app/test-pipeline`` directory.
+The application is located in the ``dpdk/<build_dir>/app`` directory.
 
 
 Running the Application
@@ -45,7 +45,7 @@ The application execution command line is:
 
 .. code-block:: console
 
-    ./test-pipeline [EAL options] -- -p PORTMASK --TABLE_TYPE
+    ./dpdk-test-pipeline [EAL options] -- -p PORTMASK --TABLE_TYPE
 
 The -c or -l EAL CPU coremask/corelist option has to contain exactly 3 CPU cores.
 The first CPU core in the core mask is assigned for core A, the second for core B and the third for core C.
doc/guides/sample_app_ug/timer.rst +1 -1
index 98d762d238..94cee9819d 100644
@@ -21,7 +21,7 @@ To run the example in linux environment:
 
 .. code-block:: console
 
-    $ ./build/timer -l 0-3 -n 4
+    $ ./<build_dir>/examples/dpdk-timer -l 0-3 -n 4
 
 Refer to the *DPDK Getting Started Guide* for general information on running applications and
 the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/vdpa.rst +2 -2
index d66a724827..a8bedbab53 100644
@@ -29,7 +29,7 @@ Start the vdpa example
 
 .. code-block:: console
 
-        ./vdpa [EAL options]  -- [--client] [--interactive|-i] or [--iface SOCKET_PATH]
+        ./dpdk-vdpa [EAL options]  -- [--client] [--interactive|-i] or [--iface SOCKET_PATH]
 
 where
 
@@ -51,7 +51,7 @@ Take IFCVF driver for example:
 
 .. code-block:: console
 
-        ./vdpa -c 0x2 -n 4 --socket-mem 1024,1024 \
+        ./dpdk-vdpa -c 0x2 -n 4 --socket-mem 1024,1024 \
                 -w 0000:06:00.3,vdpa=1 -w 0000:06:00.4,vdpa=1 \
                 -- --interactive
 
doc/guides/sample_app_ug/vhost.rst +3 -8
index b7ed4f8bdf..bacf7898f9 100644
@@ -38,7 +38,7 @@ Start the vswitch example
 
 .. code-block:: console
 
-        ./vhost-switch -l 0-3 -n 4 --socket-mem 1024  \
+        ./dpdk-vhost-switch -l 0-3 -n 4 --socket-mem 1024  \
              -- --socket-file /tmp/sock0 --client \
              ...
 
@@ -78,13 +78,13 @@ could be done by:
 .. code-block:: console
 
    modprobe uio_pci_generic
-   $RTE_SDK/usertools/dpdk-devbind.py -b uio_pci_generic 0000:00:04.0
+   dpdk/usertools/dpdk-devbind.py -b uio_pci_generic 0000:00:04.0
 
 Then start testpmd for packet forwarding testing.
 
 .. code-block:: console
 
-    ./x86_64-native-gcc/app/testpmd -l 0-1 -- -i
+    ./<build_dir>/app/dpdk-testpmd -l 0-1 -- -i
     > start tx_first
 
 Inject packets
@@ -192,11 +192,6 @@ Common Issues
   max queue number is larger than 128, device start will fail due to
   insufficient mbuf.
 
-  Change the default number to make it work as below, just set the number
-  according to the NIC's property. ::
-
-      make EXTRA_CFLAGS="-DMAX_QUEUES=320"
-
 * Option "builtin-net-driver" is incompatible with QEMU
 
   QEMU vhost net device start will fail if protocol feature is not negotiated.
doc/guides/sample_app_ug/vhost_blk.rst +1 -1
index 681de6f3e1..788eef0d5f 100644
@@ -36,7 +36,7 @@ Start the vhost_blk example
 
 .. code-block:: console
 
-        ./vhost_blk -m 1024
+        ./dpdk-vhost_blk -m 1024
 
 .. _vhost_blk_app_run_vm:
 
doc/guides/sample_app_ug/vhost_crypto.rst +1 -1
index bbc25bde1c..7ae7addac4 100644
@@ -28,7 +28,7 @@ Start the vhost_crypto example
 
 .. code-block:: console
 
-    ./vhost_crypto [EAL options] --
+    ./dpdk-vhost_crypto [EAL options] --
     		--config (lcore,cdev-id,queue-id)[,(lcore,cdev-id,queue-id)]
     		--socket-file lcore,PATH
     		[--zero-copy]
doc/guides/sample_app_ug/vm_power_management.rst +14 -20
index 1b6de8e936..35afdac63f 100644
@@ -245,26 +245,23 @@ To build just the ``vm_power_manager`` application using ``make``:
 
 .. code-block:: console
 
-   export RTE_SDK=/path/to/rte_sdk
-   export RTE_TARGET=build
-   cd ${RTE_SDK}/examples/vm_power_manager/
+   cd dpdk/examples/vm_power_manager/
    make
 
-The resulting binary is ``${RTE_SDK}/build/examples/vm_power_manager``.
+The resulting binary is ``dpdk/build/examples/vm_power_manager``.
 
 To build just the ``vm_power_manager`` application using ``meson``/``ninja``:
 
 .. code-block:: console
 
-   export RTE_SDK=/path/to/rte_sdk
-   cd ${RTE_SDK}
+   cd dpdk
    meson build
    cd build
    ninja
    meson configure -Dexamples=vm_power_manager
    ninja
 
-The resulting binary is ``${RTE_SDK}/build/examples/dpdk-vm_power_manager``.
+The resulting binary is ``dpdk/build/examples/dpdk-vm_power_manager``.
 
 Running the Host Application
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -274,7 +271,7 @@ than the EAL options:
 
 .. code-block:: console
 
-   ./build/vm_power_mgr [EAL options]
+   ./<build_dir>/examples/dpdk-vm_power_mgr [EAL options]
 
 The application requires exactly two cores to run. One core for the CLI
 and the other for the channel endpoint monitor. For example, to run on
@@ -282,7 +279,7 @@ cores 0 and 1 on a system with four memory channels, issue the command:
 
 .. code-block:: console
 
-   ./build/vm_power_mgr -l 0-1 -n 4
+   ./<build_dir>/examples/dpdk-vm_power_mgr -l 0-1 -n 4
 
 After successful initialization, the VM Power Manager CLI prompt appears:
 
@@ -462,12 +459,10 @@ the following commands:
 
 .. code-block:: console
 
-   export RTE_SDK=/path/to/rte_sdk
-   export RTE_TARGET=build
-   cd ${RTE_SDK}/examples/vm_power_manager/guest_cli/
+   cd dpdk/examples/vm_power_manager/guest_cli/
    make
 
-The resulting binary is ``${RTE_SDK}/build/examples/guest_cli``.
+The resulting binary is ``dpdk/build/examples/guest_cli``.
 
 **Note**: This sample application conditionally links in the Jansson JSON
 library. Consequently, if you are using a multilib or cross-compile
@@ -498,15 +493,14 @@ To build just the ``vm_power_manager`` application using ``meson``/``ninja``:
 
 .. code-block:: console
 
-   export RTE_SDK=/path/to/rte_sdk
-   cd ${RTE_SDK}
+   cd dpdk
    meson build
    cd build
    ninja
    meson configure -Dexamples=vm_power_manager/guest_cli
    ninja
 
-The resulting binary is ``${RTE_SDK}/build/examples/guest_cli``.
+The resulting binary is ``dpdk/build/examples/guest_cli``.
 
 Running the Guest Application
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -515,14 +509,14 @@ The standard EAL command line parameters are necessary:
 
 .. code-block:: console
 
-   ./build/vm_power_mgr [EAL options] -- [guest options]
+   ./<build_dir>/examples/dpdk-vm_power_mgr [EAL options] -- [guest options]
 
 The guest example uses a channel for each lcore enabled. For example, to
 run on cores 0, 1, 2 and 3:
 
 .. code-block:: console
 
-   ./build/guest_vm_power_mgr -l 0-3
+   ./<build_dir>/examples/dpdk-guest_vm_power_mgr -l 0-3
 
 .. _sending_policy:
 
@@ -593,7 +587,7 @@ host, use a command like the following:
 
 .. code-block:: console
 
-   ./build/guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4
+   ./<build_dir>/examples/dpdk-guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4
 
 Once the VM Power Manager Guest CLI appears, issuing the 'send_policy now' command
 will send the policy to the host:
@@ -707,7 +701,7 @@ To start the application and configure the power policy, and send it to the host
 
 .. code-block:: console
 
- ./build/guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4
+ ./<build_dir>/examples/dpdk-guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4
 
 Once the VM Power Manager Guest CLI appears, issuing the 'send_policy now' command
 will send the policy to the host:
doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst +4 -4
index 8e1774d9e2..c908074eb0 100644
@@ -26,13 +26,13 @@ multiple queues. When run with 8 threads, that is, with the -c FF option, each t
 As supplied, the sample application configures the VMDQ feature to have 32 pools with 4 queues each as indicated in :numref:`figure_vmdq_dcb_example`.
 The Intel® 82599 10 Gigabit Ethernet Controller NIC also supports the splitting of traffic into 16 pools of 8 queues. While the
 Intel® X710 or XL710 Ethernet Controller NICs support many configurations of VMDQ pools of 4 or 8 queues each. For simplicity, only 16
-or 32 pools is supported in this sample. And queues numbers for each VMDQ pool can be changed by setting CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM
-in config/common_* file.
+or 32 pools is supported in this sample. And queues numbers for each VMDQ pool can be changed by setting RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM
+in config/rte_config.h file.
 The nb-pools, nb-tcs and enable-rss parameters can be passed on the command line, after the EAL parameters:
 
 .. code-block:: console
 
-    ./build/vmdq_dcb [EAL options] -- -p PORTMASK --nb-pools NP --nb-tcs TC --enable-rss
+    ./<build_dir>/examples/dpdk-vmdq_dcb [EAL options] -- -p PORTMASK --nb-pools NP --nb-tcs TC --enable-rss
 
 where, NP can be 16 or 32, TC can be 4 or 8, rss is disabled by default.
 
@@ -72,7 +72,7 @@ To run the example in a linux environment:
 
 .. code-block:: console
 
-    user@target:~$ ./build/vmdq_dcb -l 0-3 -n 4 -- -p 0x3 --nb-pools 32 --nb-tcs 4
+    user@target:~$ ./<build_dir>/examples/dpdk-vmdq_dcb -l 0-3 -n 4 -- -p 0x3 --nb-pools 32 --nb-tcs 4
 
 Refer to the *DPDK Getting Started Guide* for general information on running applications and
 the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/vmdq_forwarding.rst +4 -4
index c3a3439e51..a1a8e77de2 100644
@@ -24,13 +24,13 @@ multiple queues. When run with 8 threads, that is, with the -c FF option, each t
 As supplied, the sample application configures the VMDq feature to have 32 pools with 4 queues each.
 The Intel® 82599 10 Gigabit Ethernet Controller NIC also supports the splitting of traffic into 16 pools of 2 queues.
 While the Intel® X710 or XL710 Ethernet Controller NICs support many configurations of VMDq pools of 4 or 8 queues each.
-And queues numbers for each VMDq pool can be changed by setting CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM
-in config/common_* file.
+And queues numbers for each VMDq pool can be changed by setting RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM
+in config/rte_config.h file.
 The nb-pools and enable-rss parameters can be passed on the command line, after the EAL parameters:
 
 .. code-block:: console
 
-    ./build/vmdq_app [EAL options] -- -p PORTMASK --nb-pools NP --enable-rss
+    ./<build_dir>/examples/dpdk-vmdq [EAL options] -- -p PORTMASK --nb-pools NP --enable-rss
 
 where, NP can be 8, 16 or 32, rss is disabled by default.
 
@@ -56,7 +56,7 @@ To run the example in a Linux environment:
 
 .. code-block:: console
 
-    user@target:~$ ./build/vmdq_app -l 0-3 -n 4 -- -p 0x3 --nb-pools 16
+    user@target:~$ ./<build_dir>/examples/dpdk-vmdq -l 0-3 -n 4 -- -p 0x3 --nb-pools 16
 
 Refer to the *DPDK Getting Started Guide* for general information on running applications and
 the Environment Abstraction Layer (EAL) options.
Signature · 1 line
2.17.1
#101 lore raw

PATCH v2 34/37 doc: remove references to make in vdpadevs guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/vdpadevs/ifc.rst  | 13 ------------
 doc/guides/vdpadevs/mlx5.rst | 40 +++---------------------------------
 2 files changed, 3 insertions(+), 50 deletions(-)
doc/guides/vdpadevs/ifc.rst +0 -13
index 12a2a342e6..f968489a75 100644
@@ -11,19 +11,6 @@ directly by DMA. Besides, it supports dirty page logging and device state
 report/restore, this driver enables its vDPA functionality.
 
 
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following option can be modified in the ``config`` file.
-
-- ``CONFIG_RTE_LIBRTE_IFC_PMD`` (default ``y`` for linux)
-
-  Toggle compilation of the ``librte_pmd_ifc`` driver.
-
-
 IFCVF vDPA Implementation
 -------------------------
 
doc/guides/vdpadevs/mlx5.rst +3 -37
index 2c7a550afc..2717459b6f 100644
@@ -14,9 +14,7 @@ SR-IOV context.
 
 .. note::
 
-   Due to external dependencies, this driver is disabled in default
-   configuration of the "make" build. It can be enabled with
-   ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD=y`` or by using "meson" build system which
+   This driver is enabled automatically when using "meson" build system which
    will detect dependencies.
 
 
@@ -65,42 +63,10 @@ Prerequisites
 Compilation options
 ~~~~~~~~~~~~~~~~~~~
 
-These options can be modified in the ``.config`` file.
-
-- ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD`` (default **n**)
-
-  Toggle compilation of librte_pmd_mlx5 itself.
-
-- ``CONFIG_RTE_IBVERBS_LINK_DLOPEN`` (default **n**)
-
-  Build PMD with additional code to make it loadable without hard
-  dependencies on **libibverbs** nor **libmlx5**, which may not be installed
-  on the target system.
-
-  In this mode, their presence is still required for it to run properly,
-  however their absence won't prevent a DPDK application from starting (with
-  ``CONFIG_RTE_BUILD_SHARED_LIB`` disabled) and they won't show up as
-  missing with ``ldd(1)``.
-
-  It works by moving these dependencies to a purpose-built rdma-core "glue"
-  plug-in which must either be installed in a directory whose name is based
-  on ``CONFIG_RTE_EAL_PMD_PATH`` suffixed with ``-glue`` if set, or in a
-  standard location for the dynamic linker (e.g. ``/lib``) if left to the
-  default empty string (``""``).
-
-  This option has no performance impact.
-
-- ``CONFIG_RTE_IBVERBS_LINK_STATIC`` (default **n**)
-
-  Embed static flavor of the dependencies **libibverbs** and **libmlx5**
-  in the PMD shared library or the executable static binary.
-
 .. note::
 
-   For BlueField, target should be set to ``arm64-bluefield-linux-gcc``. This
-   will enable ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD`` and set
-   ``RTE_CACHE_LINE_SIZE`` to 64. Default armv8a configuration of make build and
-   meson build set it to 128 then brings performance degradation.
+   Default armv8a configuration of meson build sets ``RTE_CACHE_LINE_SIZE``
+   to 128 then brings performance degradation.
 
 Run-time configuration
 ~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.17.1
#102 lore raw

PATCH v2 35/37 doc: remove reference to make in tools guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/tools/comp_perf.rst    | 10 ++-------
 doc/guides/tools/cryptoperf.rst   | 20 +++--------------
 doc/guides/tools/pdump.rst        | 15 ++++++-------
 doc/guides/tools/proc_info.rst    |  2 +-
 doc/guides/tools/testbbdev.rst    | 36 +++++++++----------------------
 doc/guides/tools/testeventdev.rst | 21 ++++++++----------
 6 files changed, 31 insertions(+), 73 deletions(-)
doc/guides/tools/comp_perf.rst +2 -8
index ee585d1024..1b33dc4e91 100644
@@ -100,13 +100,7 @@ Application Options
 Compiling the Tool
 ------------------
 
-**Step 1: PMD setting**
-
-The ``dpdk-test-compress-perf`` tool depends on compression device drivers PMD which
-can be disabled by default in the build configuration file ``common_base``.
-The compression device drivers PMD which should be tested can be enabled by setting e.g.::
-
-   CONFIG_RTE_LIBRTE_PMD_ISAL=y
+See :doc:`../linux_gsg/build_dpdk.rst` for compilation steps.
 
 
 Running the Tool
@@ -116,5 +110,5 @@ The tool has a number of command line options. Here is the sample command line:
 
 .. code-block:: console
 
-   ./build/app/dpdk-test-compress-perf  -l 4 -- --driver-name compress_qat --input-file test.txt --seg-sz 8192
+   ./<build_dir>/app/dpdk-test-compress-perf  -l 4 -- --driver-name compress_qat --input-file test.txt --seg-sz 8192
     --compress-level 1:1:9 --num-iter 10 --extended-input-sz 1048576  --max-num-sgl-segs 16 --huffman-enc fixed
doc/guides/tools/cryptoperf.rst +3 -17
index 28b729dbda..e7ea2ba1a5 100644
@@ -33,19 +33,8 @@ the hardware accelerator fully loaded and so measure maximum throughput.
 Compiling the Application
 -------------------------
 
-**Step 1: PMD setting**
 
-The ``dpdk-test-crypto-perf`` tool depends on crypto device drivers PMD which
-are disabled by default in the build configuration file ``common_base``.
-The crypto device drivers PMD which should be tested can be enabled by setting::
-
-   CONFIG_RTE_LIBRTE_PMD_<name>=y
-
-Setting example for open ssl PMD::
-
-   CONFIG_RTE_LIBRTE_PMD_OPENSSL=y
-
-**Step 2: Linearization setting**
+**Step 1: Linearization setting**
 
 It is possible linearized input segmented packets just before crypto operation
 for devices which doesn't support scatter-gather, and allows to measure
@@ -56,13 +45,10 @@ To set on the linearization options add below definition to the
 
    #define CPERF_LINEARIZATION_ENABLE
 
-**Step 3: Build the application**
+**Step 2: Build the application**
 
-Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the
-``dpdk-test-crypto-perf`` application.
+See :doc:`../linux_gsg/build_dpdk.rst` for compilation steps.
 
-Initially, the user must select a DPDK target to choose the correct target type
-and compiler options to use when building the libraries.
 The user must have all libraries, modules, updates and compilers installed
 in the system prior to this,
 as described in the earlier chapters in this Getting Started Guide.
doc/guides/tools/pdump.rst +6 -9
index 8a499c6c5b..70f03db9cc 100644
@@ -19,12 +19,9 @@ a DPDK secondary process and is capable of enabling packet capture on dpdk ports
         framework initialization code. Refer ``app/test-pmd/testpmd.c``
         code to see how this is done.
 
-      * The ``dpdk-pdump`` tool depends on libpcap based PMD which is disabled
-        by default in the build configuration files,
-        owing to an external dependency on the libpcap development files
-        which must be installed on the board.
-        Once the libpcap development files are installed, the libpcap based PMD
-        can be enabled by setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK.
+      * The ``dpdk-pdump`` tool depends on libpcap based PMD which must be
+        installed on the board.
+        Once the libpcap development files are installed, recompile the DPDK.
 
       * The ``dpdk-pdump`` tool runs as a DPDK secondary process. It exits when
         the primary application exits.
@@ -37,7 +34,7 @@ The tool has a number of command line options:
 
 .. code-block:: console
 
-   ./build/app/dpdk-pdump --
+   ./<build_dir>/app/dpdk-pdump --
                           [--multi]
                           --pdump '(port=<port id> | device_id=<pci id or vdev name>),
                                    (queue=<queue_id>),
@@ -120,5 +117,5 @@ Example
 
 .. code-block:: console
 
-   $ sudo ./build/app/dpdk-pdump -l 3 -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap'
-   $ sudo ./build/app/dpdk-pdump -l 3,4,5 -- --multi --pdump 'port=0,queue=*,rx-dev=/tmp/rx-1.pcap' --pdump 'port=1,queue=*,rx-dev=/tmp/rx-2.pcap'
+   $ sudo ./<build_dir>/app/dpdk-pdump -l 3 -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap'
+   $ sudo ./<build_dir>/app/dpdk-pdump -l 3,4,5 -- --multi --pdump 'port=0,queue=*,rx-dev=/tmp/rx-1.pcap' --pdump 'port=1,queue=*,rx-dev=/tmp/rx-2.pcap'
doc/guides/tools/proc_info.rst +1 -1
index 0390b9c589..9772d97ef0 100644
@@ -17,7 +17,7 @@ The application has a number of command line options:
 
 .. code-block:: console
 
-   ./$(RTE_TARGET)/app/dpdk-procinfo -- -m | [-p PORTMASK] [--stats | --xstats |
+   ./<build_dir>/app/dpdk-procinfo -- -m | [-p PORTMASK] [--stats | --xstats |
    --stats-reset | --xstats-reset] [ --show-port | --show-tm | --show-crypto |
    --show-ring[=name] | --show-mempool[=name] | --iter-mempool=name ]
 
doc/guides/tools/testbbdev.rst +10 -26
index 393c3e9d0d..1fea7e0aa4 100644
@@ -13,25 +13,10 @@ parameters passed to a python running script.
 Compiling the Application
 -------------------------
 
-**Step 1: PMD setting**
+**Build the application**
 
-The ``dpdk-test-bbdev`` tool depends on crypto device drivers PMD which
-are disabled by default in the build configuration file ``common_base``.
-The bbdevice drivers PMD which should be tested can be enabled by setting
+See :doc:`../linux_gsg/build_dpdk.rst` for compilation steps.
 
-   ``CONFIG_RTE_LIBRTE_PMD_<name>=y``
-
-Setting example for (*baseband_turbo_sw*) PMD
-
-   ``CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y``
-
-**Step 2: Build the application**
-
-Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the
-``dpdk-test-bbdev`` application.
-
-Initially, the user must select a DPDK target to choose the correct target type
-and compiler options to use when building the libraries.
 The user must have all libraries, modules, updates and compilers installed
 in the system prior to this, as described in the earlier chapters in this
 Getting Started Guide.
@@ -60,7 +45,7 @@ The following are the command-line options:
 
 ``-p TESTAPP_PATH, --testapp_path TESTAPP_PATH``
  Indicates the path to the bbdev test app. If not specified path is set based
- on *$RTE_SDK* environment variable concatenated with "*/build/app/testbbdev*".
+ on "../.." concatenated with "*/build/app/testbbdev*".
 
 ``-e EAL_PARAMS, --eal_params EAL_PARAMS``
  Specifies EAL arguments which are passed to the test app. For more details,
@@ -82,9 +67,8 @@ The following are the command-line options:
 
 ``-v TEST_VECTOR [TEST_VECTOR ...], --test_vector TEST_VECTOR [TEST_VECTOR ...]``
  Specifies paths to the test vector files. If not specified path is set based
- on *$RTE_SDK* environment variable concatenated with
- "*/app/test-bbdev/test_vectors/bbdev_null.data*" and indicates default
- data file.
+ on "../.." concatenated with "*/app/test-bbdev/test_vectors/bbdev_null.data*"
+and indicates default data file.
 
  **Example usage:**
 
@@ -259,8 +243,8 @@ They are chosen to have a good coverage across sizes and processing
 parameters while still keeping their number limited as part of sanity
 regression.
 
-Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled for
-x86_64-native-linux-icc target:
+Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled and output
+to the build directory:
 
 ::
 
@@ -268,7 +252,7 @@ x86_64-native-linux-icc target:
      |-- test-bbdev
          |-- test_vectors
 
- |-- x86_64-native-linux-icc
+ |-- build
      |-- app
          |-- testbbdev
 
@@ -277,7 +261,7 @@ All bbdev devices
 
 .. code-block:: console
 
-  ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev
+  ./test-bbdev.py -p ../../build/app/dpdk-test-bbdev
   -v turbo_dec_default.data
 
 It runs all available tests using the test vector filled based on
@@ -291,7 +275,7 @@ baseband turbo_sw device
 
 .. code-block:: console
 
-  ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev
+  ./test-bbdev.py -p ../../build/app/dpdk-test-bbdev
   -e="--vdev=baseband_turbo_sw" -t 120 -c validation
   -v ./test_vectors/* -n 64 -b 8 32
 
doc/guides/tools/testeventdev.rst +9 -12
index 2ed67a6340..00387ec4ed 100644
@@ -15,11 +15,8 @@ Compiling the Application
 
 **Build the application**
 
-Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the
-``dpdk-test-eventdev`` application.
+See :doc:`../linux_gsg/build_dpdk.rst` for compilation steps.
 
-Initially, the user must select a DPDK target to choose the correct target type
-and compiler options to use when building the libraries.
 The user must have all libraries, modules, updates and compilers installed
 in the system prior to this,
 as described in the earlier chapters in this Getting Started Guide.
@@ -251,7 +248,7 @@ Example command to run order queue test:
 
 .. code-block:: console
 
-   sudo build/app/dpdk-test-eventdev --vdev=event_sw0 -- \
+   sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_sw0 -- \
                 --test=order_queue --plcores 1 --wlcores 2,3
 
 
@@ -314,7 +311,7 @@ Example command to run order ``all types queue`` test:
 
 .. code-block:: console
 
-   sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \
+   sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_octeontx -- \
                         --test=order_atq --plcores 1 --wlcores 2,3
 
 
@@ -414,7 +411,7 @@ Example command to run perf queue test:
 
 .. code-block:: console
 
-   sudo build/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \
+   sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \
         --test=perf_queue --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0
 
 Example command to run perf queue test with ethernet ports:
@@ -428,7 +425,7 @@ Example command to run perf queue test with event timer adapter:
 
 .. code-block:: console
 
-   sudo  build/app/dpdk-test-eventdev --vdev="event_octeontx" -- \
+   sudo  <build_dir>/app/dpdk-test-eventdev --vdev="event_octeontx" -- \
                 --wlcores 4 --plcores 12 --test perf_queue --stlist=a \
                 --prod_type_timerdev --fwd_latency
 
@@ -514,14 +511,14 @@ Example command to run perf ``all types queue`` test:
 
 .. code-block:: console
 
-   sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \
+   sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_octeontx -- \
                 --test=perf_atq --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0
 
 Example command to run perf ``all types queue`` test with event timer adapter:
 
 .. code-block:: console
 
-   sudo  build/app/dpdk-test-eventdev --vdev="event_octeontx" -- \
+   sudo  <build_dir>/app/dpdk-test-eventdev --vdev="event_octeontx" -- \
                 --wlcores 4 --plcores 12 --test perf_atq --verbose 20 \
                 --stlist=a --prod_type_timerdev --fwd_latency
 
@@ -633,7 +630,7 @@ Example command to run pipeline queue test:
 
 .. code-block:: console
 
-    sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
+    sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
         --test=pipeline_queue --wlcore=1 --prod_type_ethdev --stlist=a
 
 
@@ -725,5 +722,5 @@ Example command to run pipeline queue test:
 
 .. code-block:: console
 
-    sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
+    sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
         --test=pipeline_atq --wlcore=1 --prod_type_ethdev --stlist=a
Signature · 1 line
2.17.1
Reviewed-by on v2 35/37
#103 lore raw

Re: [dpdk-dev] [PATCH v2 35/37] doc: remove reference to make in tools guides

Quoted 4 lines · Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

Quoted 9 lines
---
  doc/guides/tools/comp_perf.rst    | 10 ++-------
  doc/guides/tools/cryptoperf.rst   | 20 +++--------------
  doc/guides/tools/pdump.rst        | 15 ++++++-------
  doc/guides/tools/proc_info.rst    |  2 +-
  doc/guides/tools/testbbdev.rst    | 36 +++++++++----------------------
  doc/guides/tools/testeventdev.rst | 21 ++++++++----------
  6 files changed, 31 insertions(+), 73 deletions(-)
#104 lore raw

PATCH v2 36/37 doc: remove references to make in testpmd guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/testpmd_app_ug/run_app.rst       | 6 +++---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 +--------
 2 files changed, 4 insertions(+), 11 deletions(-)
doc/guides/testpmd_app_ug/run_app.rst +3 -3
index d1e4ee3e7a..ac4f0d9212 100644
@@ -20,7 +20,7 @@ They must be separated from the EAL options, shown in the previous section, with
 
 .. code-block:: console
 
-    sudo ./testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=2
+    sudo ./dpdk-testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=2
 
 The command line options are:
 
@@ -59,13 +59,13 @@ The command line options are:
 *   ``--nb-cores=N``
 
     Set the number of forwarding cores,
-    where 1 <= N <= "number of cores" or ``CONFIG_RTE_MAX_LCORE`` from the configuration file.
+    where 1 <= N <= "number of cores" or ``RTE_MAX_LCORE`` from the configuration file.
     The default value is 1.
 
 *   ``--nb-ports=N``
 
     Set the number of forwarding ports,
-    where 1 <= N <= "number of ports" on the board or ``CONFIG_RTE_MAX_ETHPORTS`` from the configuration file.
+    where 1 <= N <= "number of ports" on the board or ``RTE_MAX_ETHPORTS`` from the configuration file.
     The default value is the number of ports on the board.
 
 *   ``--coremask=0xXX``
doc/guides/testpmd_app_ug/testpmd_funcs.rst +1 -8
index 90cf252df5..f0d838321c 100644
@@ -71,7 +71,7 @@ practical or possible testpmd supports alternative methods for executing command
 
 .. code-block:: console
 
-   ./testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt
+   ./dpdk-testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt
    Interactive-mode selected
    CLI commands to be read from /home/ubuntu/flow-create-commands.txt
    Configuring Port 0 (socket 0)
@@ -329,8 +329,6 @@ The available information categories are:
 
 * ``icmpecho``: Receives a burst of packets, lookup for ICMP echo requests and, if any, send back ICMP echo replies.
 
-* ``ieee1588``: Demonstrate L2 IEEE1588 V2 PTP timestamping for RX and TX. Requires ``CONFIG_RTE_LIBRTE_IEEE1588=y``.
-
 * ``noisy``: Noisy neighbor simulation.
   Simulate more realistic behavior of a guest machine engaged in receiving
   and sending packets performing Virtual Network Function (VNF).
@@ -379,11 +377,6 @@ Example for the io forwarding engine, with some packet drops on the tx side::
      TX-packets: 548595568      TX-dropped: 128           TX-total: 548595696
      ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
-.. note::
-
-   Enabling CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES appends "CPU cycles/packet" stats, like:
-
-   CPU cycles/packet=xx.dd (total cycles=xxxx / total RX packets=xxxx) at xxx MHz clock
 
 clear fwd
 ~~~~~~~~~
Signature · 1 line
2.17.1
Reviewed-by on v2 36/37
#105 lore raw

Re: [dpdk-dev] [PATCH v2 36/37] doc: remove references to make in testpmd guides

Quoted 9 lines · Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
  doc/guides/testpmd_app_ug/run_app.rst       | 6 +++---
  doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 +--------
  2 files changed, 4 insertions(+), 11 deletions(-)

<snip>

Quoted 14 lines
doc/guides/testpmd_app_ug/testpmd_funcs.rst +1 -1
index 90cf252df5..f0d838321c 100644
@@ -71,7 +71,7 @@ practical or possible testpmd supports alternative methods for executing command
 
  .. code-block:: console
 
-   ./testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt
+   ./dpdk-testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt
     Interactive-mode selected
     CLI commands to be read from /home/ubuntu/flow-create-commands.txt
     Configuring Port 0 (socket 0)

doc/guides/testpmd_app_ug/testpmd_funcs.rst The available information categories are: · line 333

Quoted 5 lines
doc/guides/testpmd_app_ug/testpmd_funcs.rst +0 -2
@@ -329,8 +329,6 @@ The available information categories are:
 
  * ``icmpecho``: Receives a burst of packets, lookup for ICMP echo requests and, if any, send back ICMP echo replies.
 
-* ``ieee1588``: Demonstrate L2 IEEE1588 V2 PTP timestamping for RX and TX. Requires ``CONFIG_RTE_LIBRTE_IEEE1588=y``.
-

The support for ieee1588 info is not being removed, this line should stay in the documentation. Just remove the "CONFIG..." part. LGTM other than that.

#106 lore raw

PATCH v2 37/37 doc: update quick build doc to remove make references

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/build-sdk-quick.txt | 55 ++++++++++++++++-------------------------
 1 file changed, 21 insertions(+), 34 deletions(-)
doc/build-sdk-quick.txt +21 -34
index bcfa7d6fe1..423104094e 100644
@@ -1,34 +1,21 @@
-Basic build
-	make defconfig && make
-	or
-	make config T=x86_64-native-linux-gcc && make
-Build commands
-	config           get configuration from target template (T=)
-	defconfig        auto-select target template based on arch, OS, etc.
-	all              same as build (default rule)
-	build            build in a configured directory
-	clean            remove files but keep configuration
-	install T=       configure, build and install a target in DESTDIR
-	install          install optionally staged in DESTDIR
-	examples         build examples for given targets (T=)
-	examples_clean   clean examples for given targets (T=)
-	test             compile tests and run basic unit tests
-	test-*           run specific subset of unit tests
-	tags|etags|gtags generate tags database for given targets (T=)
-	cscope           generate cscope database for given targets (T=)
-Build variables
-	EXTRA_CPPFLAGS   preprocessor options
-	EXTRA_CFLAGS     compiler options
-	EXTRA_LDFLAGS    linker options
-	EXTRA_LDLIBS     linker library options
-	RTE_KERNELDIR    linux headers path
-	RTE_DEVEL_BUILD  stricter options (default: y in git tree)
-	CROSS     toolchain prefix
-	V         verbose
-	D         debug dependencies
-	O         build directory (default: build/ - install T= default: ./)
-	DESTDIR   staging install directory (default: empty)
-	prefix    root install directory (default: /usr/local)
-	T         target template - used with config or install
-			format: <arch-machine-execenv-toolchain>
-			templates in config/defconfig_*
+For many platforms, compiling and installing DPDK should work using the
+following set of commands::
+
+	meson build
+	cd build
+	ninja
+	ninja install
+
+This will compile DPDK in the ``build`` subdirectory, and then install the
+resulting libraries, drivers and header files onto the system - generally
+in /usr/local. A package-config file, ``libdpdk.pc``,  for DPDK will also
+be installed to allow ease of compiling and linking with applications.
+
+After installation, to use DPDK, the necessary CFLAG and LDFLAG variables
+can be got from pkg-config::
+
+	pkg-config --cflags libdpdk
+	pkg-config --libs libdpdk
+
+More detail on each of these steps can be got from the
+"Installing DPDK Using the meson build system" section of the programming guides.
Signature · 1 line
2.17.1
Reviewed-by on v2 37/37
#107 lore raw

Re: [dpdk-dev] [PATCH v2 37/37] doc: update quick build doc to remove make references

Quoted 8 lines · Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
  doc/build-sdk-quick.txt | 55 ++++++++++++++++-------------------------
  1 file changed, 21 insertions(+), 34 deletions(-)
#108 lore raw

v3 cover remove make support in DPDK

In reply to Ciara Power

v3: Fixed comments on v2.
v2:
- Fixed comments on v1.
- Removed additional make references.
- Added some meson replacements where necessary.
- Added dummy root Makefile.

As previously decided [1] and communicated via deprecation notice [2], the make build system is to be removed in the 20.11 release.

This patchset removes support for compiling DPDK with the legacy make build system. Some make support is maintained for example applications, where pkg-config is used rather than the legacy make method.

References to the make build system are removed from all documentation, please review to see if replacement meson instructions are needed in some cases.

[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
[2] http://git.dpdk.org/dpdk/commit/?id=a5449d78d1413e7bd1d66f6e70884e46cfb5e673

Bruce Richardson (6):
examples/multi_process: convert to pkg-config-based build examples/vm_power_manager: convert to use DPDK pkg-config examples/vm_power_manager: convert guest cli to pkg-config examples/ethtool: convert to pkg-config-based build
build: create dummy Makefile
doc/guides: remove use of DPDK make build system

Ciara Power (28):
examples: remove legacy sections of makefiles
build: remove makefiles and mk directory
config: remove all config files used by make
examples: remove old build system references
buildtools: remove all scripts for use with make
devtools: remove use of make in scripts app/test: remove references to make
drivers: remove references to make config options
lib: remove references to make config options
doc: remove deprecation notice for make
doc: remove references to make in bbdev guides
doc: remove references to make in compressdev guides
doc: remove references to make in contributing guides
doc: remove references to make in cryptodev guides
doc: remove references to make in eventdev guides
doc: remove references to make in FreeBSD gsg guide
doc: remove references to make in howto guides
doc: remove references to make in Linux gsg guides
doc: remove references to make in mempool guides
doc: remove references to make in NIC guides
doc: remove references to make in platform guides
doc: remove references to make in prog guides
doc: remove references to make in rawdev guides
doc: remove references to make in sample app guides
doc: remove references to make in vdpadevs guides
doc: remove reference to make in tools guides
doc: remove references to make in testpmd guides
doc: update quick build doc to remove make references

Kevin Laatz (3):
examples/server_node_efd: convert to pkg-config-based build examples/ka-agent: convert to pkg-config-based build examples/pthread: convert to pkg-config-based build

 GNUmakefile                                   |   17 -
 MAINTAINERS                                   |   12 +-
 Makefile                                      |    7 +-
 app/Makefile                                  |   34 -
 app/pdump/Makefile                            |   18 -
 app/proc-info/Makefile                        |   14 -
 app/test-acl/Makefile                         |   17 -
 app/test-bbdev/Makefile                       |   30 -
 app/test-bbdev/test-bbdev.py                  |   11 +-
 app/test-cmdline/Makefile                     |   24 -
 app/test-compress-perf/Makefile               |   19 -
 app/test-crypto-perf/Makefile                 |   28 -
 app/test-eventdev/Makefile                    |   32 -
 app/test-fib/Makefile                         |   18 -
 app/test-flow-perf/Makefile                   |   26 -
 app/test-pipeline/Makefile                    |   33 -
 app/test-pmd/Makefile                         |   73 --
 app/test-regex/Makefile                       |   13 -
 app/test-sad/Makefile                         |   17 -
 app/test/Makefile                             |  310 -----
 app/test/test_cryptodev.c                     |   89 +-
 app/test/test_cryptodev_asym.c                |   18 +-
 buildtools/Makefile                           |    9 -
 buildtools/auto-config-h.sh                   |  108 --
 buildtools/call-sphinx-build.py               |    5 +-
 buildtools/gen-build-mk.sh                    |   23 -
 buildtools/gen-config-h.sh                    |   15 -
 buildtools/pmdinfogen/Makefile                |   20 -
 buildtools/relpath.sh                         |   76 --
 config/common_armv8a_linux                    |   43 -
 config/common_base                            | 1154 -----------------
 config/common_freebsd                         |   15 -
 config/common_linux                           |   68 -
 config/defconfig_arm-armv7a-linux-gcc         |    1 -
 config/defconfig_arm-armv7a-linuxapp-gcc      |   49 -
 config/defconfig_arm64-armada-linux-gcc       |    1 -
 config/defconfig_arm64-armada-linuxapp-gcc    |   41 -
 config/defconfig_arm64-armv8a-linux-clang     |    1 -
 config/defconfig_arm64-armv8a-linux-gcc       |    1 -
 config/defconfig_arm64-armv8a-linuxapp-clang  |    8 -
 config/defconfig_arm64-armv8a-linuxapp-gcc    |    9 -
 config/defconfig_arm64-bluefield-linux-gcc    |    1 -
 config/defconfig_arm64-bluefield-linuxapp-gcc |   18 -
 config/defconfig_arm64-dpaa-linux-gcc         |    1 -
 config/defconfig_arm64-dpaa-linuxapp-gcc      |   31 -
 config/defconfig_arm64-emag-linux-gcc         |    1 -
 config/defconfig_arm64-emag-linuxapp-gcc      |   11 -
 config/defconfig_arm64-n1sdp-linux-gcc        |    1 -
 config/defconfig_arm64-n1sdp-linuxapp-gcc     |   14 -
 config/defconfig_arm64-octeontx2-linux-gcc    |    1 -
 config/defconfig_arm64-octeontx2-linuxapp-gcc |   18 -
 config/defconfig_arm64-stingray-linux-gcc     |    1 -
 config/defconfig_arm64-stingray-linuxapp-gcc  |   14 -
 config/defconfig_arm64-thunderx-linux-gcc     |    1 -
 config/defconfig_arm64-thunderx-linuxapp-gcc  |   17 -
 config/defconfig_arm64-thunderx2-linux-gcc    |    1 -
 config/defconfig_arm64-thunderx2-linuxapp-gcc |   12 -
 config/defconfig_arm64-xgene1-linux-gcc       |    1 -
 config/defconfig_arm64-xgene1-linuxapp-gcc    |    8 -
 config/defconfig_i686-native-linux-gcc        |    1 -
 config/defconfig_i686-native-linux-icc        |    1 -
 config/defconfig_i686-native-linuxapp-gcc     |   66 -
 config/defconfig_i686-native-linuxapp-icc     |   66 -
 config/defconfig_ppc_64-power8-linux-gcc      |    1 -
 config/defconfig_ppc_64-power8-linuxapp-gcc   |   35 -
 config/defconfig_x86_64-native-bsdapp-clang   |   14 -
 config/defconfig_x86_64-native-bsdapp-gcc     |   14 -
 config/defconfig_x86_64-native-freebsd-clang  |    1 -
 config/defconfig_x86_64-native-freebsd-gcc    |    1 -
 config/defconfig_x86_64-native-linux-clang    |    1 -
 config/defconfig_x86_64-native-linux-gcc      |    1 -
 config/defconfig_x86_64-native-linux-icc      |    1 -
 config/defconfig_x86_64-native-linuxapp-clang |   14 -
 config/defconfig_x86_64-native-linuxapp-gcc   |   14 -
 config/defconfig_x86_64-native-linuxapp-icc   |   29 -
 config/defconfig_x86_x32-native-linux-gcc     |    1 -
 config/defconfig_x86_x32-native-linuxapp-gcc  |   46 -
 devtools/build-tags.sh                        |   14 +-
 devtools/check-includes.sh                    |    3 +-
 devtools/git-log-fixes.sh                     |    2 +-
 devtools/test-build.sh                        |  315 -----
 doc/build-sdk-quick.txt                       |   55 +-
 doc/guides/bbdevs/fpga_5gnr_fec.rst           |    7 +-
 doc/guides/bbdevs/fpga_lte_fec.rst            |    7 +-
 doc/guides/bbdevs/turbo_sw.rst                |   15 -
 doc/guides/compressdevs/isal.rst              |    4 -
 doc/guides/compressdevs/octeontx.rst          |   24 +-
 doc/guides/compressdevs/zlib.rst              |    4 -
 doc/guides/conf.py                            |    7 +-
 doc/guides/contributing/coding_style.rst      |   46 +-
 doc/guides/contributing/design.rst            |  127 +-
 doc/guides/contributing/documentation.rst     |   31 +-
 doc/guides/contributing/patches.rst           |   45 -
 doc/guides/cryptodevs/aesni_gcm.rst           |    4 +-
 doc/guides/cryptodevs/aesni_mb.rst            |    4 +-
 doc/guides/cryptodevs/armv8.rst               |    3 -
 doc/guides/cryptodevs/caam_jr.rst             |   30 -
 doc/guides/cryptodevs/ccp.rst                 |   14 +-
 doc/guides/cryptodevs/dpaa2_sec.rst           |   25 -
 doc/guides/cryptodevs/dpaa_sec.rst            |   25 -
 doc/guides/cryptodevs/kasumi.rst              |   11 +-
 doc/guides/cryptodevs/mvsam.rst               |   10 +-
 doc/guides/cryptodevs/nitrox.rst              |    7 -
 doc/guides/cryptodevs/null.rst                |    2 +-
 doc/guides/cryptodevs/octeontx.rst            |   12 +-
 doc/guides/cryptodevs/octeontx2.rst           |    8 +-
 doc/guides/cryptodevs/openssl.rst             |    6 +-
 doc/guides/cryptodevs/qat.rst                 |   67 +-
 doc/guides/cryptodevs/scheduler.rst           |    8 -
 doc/guides/cryptodevs/snow3g.rst              |   10 +-
 doc/guides/cryptodevs/virtio.rst              |   20 +-
 doc/guides/cryptodevs/zuc.rst                 |   10 +-
 doc/guides/eventdevs/dpaa.rst                 |   20 -
 doc/guides/eventdevs/dpaa2.rst                |   20 -
 doc/guides/eventdevs/octeontx.rst             |   24 -
 doc/guides/eventdevs/octeontx2.rst            |    8 -
 doc/guides/freebsd_gsg/build_dpdk.rst         |    2 +-
 doc/guides/freebsd_gsg/intro.rst              |    4 +-
 doc/guides/howto/lm_bond_virtio_sriov.rst     |    4 +-
 doc/guides/howto/lm_virtio_vhost_user.rst     |    4 +-
 doc/guides/howto/packet_capture_framework.rst |   21 +-
 doc/guides/howto/pvp_reference_benchmark.rst  |   27 +-
 doc/guides/howto/vfd.rst                      |    4 +-
 .../virtio_user_for_container_networking.rst  |    2 +-
 doc/guides/linux_gsg/build_dpdk.rst           |   84 +-
 doc/guides/linux_gsg/build_sample_apps.rst    |   69 +-
 .../linux_gsg/cross_build_dpdk_for_arm64.rst  |   48 +-
 doc/guides/linux_gsg/enable_func.rst          |   13 +-
 doc/guides/linux_gsg/intro.rst                |    2 +-
 doc/guides/linux_gsg/linux_drivers.rst        |   18 +-
 doc/guides/linux_gsg/sys_reqs.rst             |   16 +-
 doc/guides/mempool/octeontx.rst               |   28 +-
 doc/guides/mempool/octeontx2.rst              |   10 +-
 doc/guides/meson.build                        |    3 +-
 doc/guides/nics/ark.rst                       |   26 -
 doc/guides/nics/atlantic.rst                  |    4 -
 doc/guides/nics/axgbe.rst                     |   15 -
 doc/guides/nics/bnx2x.rst                     |   27 -
 doc/guides/nics/bnxt.rst                      |    5 +-
 doc/guides/nics/build_and_test.rst            |    8 +-
 doc/guides/nics/cxgbe.rst                     |   36 +-
 doc/guides/nics/dpaa.rst                      |   27 +-
 doc/guides/nics/dpaa2.rst                     |   26 +-
 doc/guides/nics/ena.rst                       |   16 -
 doc/guides/nics/enetc.rst                     |    2 -
 doc/guides/nics/enic.rst                      |    9 -
 doc/guides/nics/fail_safe.rst                 |   20 +-
 doc/guides/nics/features.rst                  |    9 -
 doc/guides/nics/fm10k.rst                     |    4 -
 doc/guides/nics/hinic.rst                     |    9 -
 doc/guides/nics/hns3.rst                      |   10 -
 doc/guides/nics/i40e.rst                      |   44 +-
 doc/guides/nics/ice.rst                       |   25 +-
 doc/guides/nics/igc.rst                       |   18 +-
 doc/guides/nics/intel_vf.rst                  |   13 +-
 doc/guides/nics/ionic.rst                     |    8 -
 doc/guides/nics/ipn3ke.rst                    |   12 +-
 doc/guides/nics/kni.rst                       |    4 +-
 doc/guides/nics/liquidio.rst                  |   27 -
 doc/guides/nics/memif.rst                     |   10 +-
 doc/guides/nics/mlx4.rst                      |   55 +-
 doc/guides/nics/mlx5.rst                      |   62 +-
 doc/guides/nics/mvneta.rst                    |   36 +-
 doc/guides/nics/mvpp2.rst                     |   43 +-
 doc/guides/nics/nfb.rst                       |   19 +-
 doc/guides/nics/nfp.rst                       |    4 -
 doc/guides/nics/null.rst                      |    6 +-
 doc/guides/nics/octeontx.rst                  |   19 +-
 doc/guides/nics/octeontx2.rst                 |   13 +-
 doc/guides/nics/pcap_ring.rst                 |   24 +-
 doc/guides/nics/qede.rst                      |   17 +-
 doc/guides/nics/sfc_efx.rst                   |   15 -
 doc/guides/nics/softnic.rst                   |   13 +-
 doc/guides/nics/szedata2.rst                  |   18 +-
 doc/guides/nics/thunderx.rst                  |   25 +-
 doc/guides/nics/vdev_netvsc.rst               |    6 -
 doc/guides/nics/vhost.rst                     |    2 +-
 doc/guides/nics/virtio.rst                    |    4 +-
 doc/guides/platform/bluefield.rst             |   22 -
 doc/guides/platform/octeontx.rst              |   33 +-
 doc/guides/platform/octeontx2.rst             |   32 -
 doc/guides/prog_guide/build_app.rst           |   48 +-
 .../prog_guide/dev_kit_build_system.rst       |  331 -----
 .../prog_guide/dev_kit_root_make_help.rst     |  188 ---
 .../prog_guide/env_abstraction_layer.rst      |   17 +-
 ...ib_make_help.rst => ext_app_make_help.rst} |   25 +-
 doc/guides/prog_guide/graph_lib.rst           |    6 +-
 doc/guides/prog_guide/index.rst               |    4 +-
 doc/guides/prog_guide/intro.rst               |    2 +-
 .../prog_guide/ip_fragment_reassembly_lib.rst |    5 -
 .../prog_guide/kernel_nic_interface.rst       |   14 +-
 .../link_bonding_poll_mode_drv_lib.rst        |   15 +-
 doc/guides/prog_guide/lto.rst                 |   12 +-
 doc/guides/prog_guide/mbuf_lib.rst            |    4 +-
 doc/guides/prog_guide/mempool_lib.rst         |    7 +-
 doc/guides/prog_guide/overview.rst            |   12 +-
 doc/guides/prog_guide/profile_app.rst         |   17 +-
 doc/guides/prog_guide/qos_framework.rst       |   10 +-
 doc/guides/prog_guide/rcu_lib.rst             |    7 +-
 doc/guides/prog_guide/source_org.rst          |   23 +-
 doc/guides/prog_guide/trace_lib.rst           |    3 +-
 .../prog_guide/writing_efficient_code.rst     |    3 +-
 doc/guides/rawdevs/dpaa2_cmdif.rst            |   21 -
 doc/guides/rawdevs/dpaa2_qdma.rst             |   21 -
 doc/guides/rawdevs/ifpga.rst                  |   10 -
 doc/guides/rawdevs/ioat.rst                   |    8 +-
 doc/guides/rawdevs/ntb.rst                    |    6 -
 doc/guides/rawdevs/octeontx2_dma.rst          |   12 -
 doc/guides/rawdevs/octeontx2_ep.rst           |    8 -
 doc/guides/rel_notes/deprecation.rst          |    7 -
 doc/guides/sample_app_ug/bbdev_app.rst        |   34 +-
 doc/guides/sample_app_ug/cmd_line.rst         |    2 +-
 doc/guides/sample_app_ug/compiling.rst        |   83 +-
 doc/guides/sample_app_ug/dist_app.rst         |    4 +-
 doc/guides/sample_app_ug/ethtool.rst          |    2 +-
 .../sample_app_ug/eventdev_pipeline.rst       |    3 +-
 doc/guides/sample_app_ug/fips_validation.rst  |   10 +-
 doc/guides/sample_app_ug/flow_classify.rst    |    4 +-
 doc/guides/sample_app_ug/flow_filtering.rst   |   25 +-
 doc/guides/sample_app_ug/hello_world.rst      |    2 +-
 doc/guides/sample_app_ug/ioat.rst             |    6 +-
 doc/guides/sample_app_ug/ip_frag.rst          |    6 +-
 doc/guides/sample_app_ug/ip_pipeline.rst      |    4 +-
 doc/guides/sample_app_ug/ip_reassembly.rst    |    9 +-
 doc/guides/sample_app_ug/ipsec_secgw.rst      |   14 +-
 doc/guides/sample_app_ug/ipv4_multicast.rst   |    4 +-
 doc/guides/sample_app_ug/keep_alive.rst       |    4 +-
 .../sample_app_ug/kernel_nic_interface.rst    |   14 +-
 doc/guides/sample_app_ug/l2_forward_cat.rst   |    4 +-
 .../sample_app_ug/l2_forward_crypto.rst       |    4 +-
 doc/guides/sample_app_ug/l2_forward_event.rst |   10 +-
 .../sample_app_ug/l2_forward_job_stats.rst    |    4 +-
 .../sample_app_ug/l2_forward_real_virtual.rst |    6 +-
 doc/guides/sample_app_ug/l3_forward.rst       |   10 +-
 .../sample_app_ug/l3_forward_access_ctrl.rst  |    6 +-
 doc/guides/sample_app_ug/l3_forward_graph.rst |    4 +-
 .../sample_app_ug/l3_forward_power_man.rst    |   14 +-
 doc/guides/sample_app_ug/link_status_intr.rst |    4 +-
 doc/guides/sample_app_ug/multi_process.rst    |   20 +-
 doc/guides/sample_app_ug/ntb.rst              |    2 +-
 doc/guides/sample_app_ug/packet_ordering.rst  |    3 +-
 .../sample_app_ug/performance_thread.rst      |   44 +-
 doc/guides/sample_app_ug/ptpclient.rst        |    9 +-
 doc/guides/sample_app_ug/qos_metering.rst     |    2 +-
 doc/guides/sample_app_ug/qos_scheduler.rst    |   10 +-
 doc/guides/sample_app_ug/rxtx_callbacks.rst   |    9 +-
 doc/guides/sample_app_ug/server_node_efd.rst  |    2 +-
 doc/guides/sample_app_ug/service_cores.rst    |   23 +-
 doc/guides/sample_app_ug/skeleton.rst         |    2 +-
 doc/guides/sample_app_ug/tep_termination.rst  |   43 +-
 doc/guides/sample_app_ug/test_pipeline.rst    |    4 +-
 doc/guides/sample_app_ug/timer.rst            |    2 +-
 doc/guides/sample_app_ug/vdpa.rst             |    4 +-
 doc/guides/sample_app_ug/vhost.rst            |   11 +-
 doc/guides/sample_app_ug/vhost_blk.rst        |    2 +-
 doc/guides/sample_app_ug/vhost_crypto.rst     |    2 +-
 .../sample_app_ug/vm_power_management.rst     |   34 +-
 .../sample_app_ug/vmdq_dcb_forwarding.rst     |    8 +-
 doc/guides/sample_app_ug/vmdq_forwarding.rst  |    8 +-
 doc/guides/testpmd_app_ug/run_app.rst         |    6 +-
 doc/guides/testpmd_app_ug/testpmd_funcs.rst   |    9 +-
 doc/guides/tools/comp_perf.rst                |   10 +-
 doc/guides/tools/cryptoperf.rst               |   20 +-
 doc/guides/tools/pdump.rst                    |   15 +-
 doc/guides/tools/proc_info.rst                |    2 +-
 doc/guides/tools/testbbdev.rst                |   36 +-
 doc/guides/tools/testeventdev.rst             |   21 +-
 doc/guides/vdpadevs/ifc.rst                   |   13 -
 doc/guides/vdpadevs/mlx5.rst                  |   40 +-
 drivers/Makefile                              |   34 -
 drivers/baseband/Makefile                     |   18 -
 drivers/baseband/fpga_5gnr_fec/Makefile       |   28 -
 drivers/baseband/fpga_lte_fec/Makefile        |   25 -
 drivers/baseband/null/Makefile                |   21 -
 drivers/baseband/turbo_sw/Makefile            |   52 -
 drivers/bus/Makefile                          |   15 -
 drivers/bus/dpaa/Makefile                     |   48 -
 drivers/bus/fslmc/Makefile                    |   47 -
 drivers/bus/ifpga/Makefile                    |   28 -
 drivers/bus/pci/Makefile                      |   33 -
 drivers/bus/pci/bsd/Makefile                  |    4 -
 drivers/bus/pci/linux/Makefile                |    6 -
 drivers/bus/pci/linux/pci_vfio.c              |    1 -
 drivers/bus/vdev/Makefile                     |   27 -
 drivers/bus/vmbus/Makefile                    |   33 -
 drivers/bus/vmbus/linux/Makefile              |    3 -
 drivers/common/Makefile                       |   39 -
 drivers/common/cpt/Makefile                   |   24 -
 drivers/common/dpaax/Makefile                 |   30 -
 drivers/common/iavf/Makefile                  |   27 -
 drivers/common/mlx5/Makefile                  |  404 ------
 drivers/common/mvep/Makefile                  |   35 -
 drivers/common/octeontx/Makefile              |   22 -
 drivers/common/octeontx2/Makefile             |   39 -
 drivers/common/qat/Makefile                   |   74 --
 drivers/compress/Makefile                     |   10 -
 drivers/compress/isal/Makefile                |   27 -
 drivers/compress/octeontx/Makefile            |   26 -
 drivers/compress/zlib/Makefile                |   25 -
 drivers/crypto/Makefile                       |   31 -
 drivers/crypto/aesni_gcm/Makefile             |   43 -
 drivers/crypto/aesni_mb/Makefile              |   42 -
 drivers/crypto/armv8/Makefile                 |   36 -
 drivers/crypto/caam_jr/Makefile               |   39 -
 drivers/crypto/ccp/Makefile                   |   32 -
 drivers/crypto/dpaa2_sec/Makefile             |   45 -
 drivers/crypto/dpaa_sec/Makefile              |   38 -
 drivers/crypto/kasumi/Makefile                |   42 -
 drivers/crypto/mvsam/Makefile                 |   40 -
 drivers/crypto/nitrox/Makefile                |   30 -
 drivers/crypto/null/Makefile                  |   27 -
 drivers/crypto/octeontx/Makefile              |   36 -
 drivers/crypto/octeontx2/Makefile             |   49 -
 drivers/crypto/openssl/Makefile               |   26 -
 drivers/crypto/scheduler/Makefile             |   34 -
 drivers/crypto/snow3g/Makefile                |   43 -
 drivers/crypto/virtio/Makefile                |   33 -
 drivers/crypto/zuc/Makefile                   |   42 -
 drivers/event/Makefile                        |   20 -
 drivers/event/dpaa/Makefile                   |   39 -
 drivers/event/dpaa2/Makefile                  |   41 -
 drivers/event/dsw/Makefile                    |   26 -
 drivers/event/octeontx/Makefile               |   51 -
 drivers/event/octeontx2/Makefile              |   47 -
 drivers/event/opdl/Makefile                   |   29 -
 drivers/event/skeleton/Makefile               |   24 -
 drivers/event/sw/Makefile                     |   29 -
 drivers/mempool/Makefile                      |   18 -
 drivers/mempool/bucket/Makefile               |   25 -
 drivers/mempool/dpaa/Makefile                 |   30 -
 drivers/mempool/dpaa2/Makefile                |   31 -
 drivers/mempool/octeontx/Makefile             |   39 -
 drivers/mempool/octeontx2/Makefile            |   40 -
 drivers/mempool/ring/Makefile                 |   19 -
 drivers/mempool/stack/Makefile                |   22 -
 drivers/net/Makefile                          |   84 --
 drivers/net/af_packet/Makefile                |   27 -
 drivers/net/af_xdp/Makefile                   |   26 -
 drivers/net/ark/Makefile                      |   39 -
 drivers/net/atlantic/Makefile                 |   34 -
 drivers/net/avp/Makefile                      |   29 -
 drivers/net/axgbe/Makefile                    |   33 -
 drivers/net/bnx2x/Makefile                    |   33 -
 drivers/net/bnxt/Makefile                     |   63 -
 drivers/net/bnxt/hcapi/Makefile               |    5 -
 drivers/net/bnxt/tf_core/Makefile             |   31 -
 drivers/net/bnxt/tf_ulp/Makefile              |   20 -
 drivers/net/bonding/Makefile                  |   36 -
 drivers/net/cxgbe/Makefile                    |   57 -
 drivers/net/dpaa/Makefile                     |   41 -
 drivers/net/dpaa2/Makefile                    |   47 -
 drivers/net/e1000/Makefile                    |   79 --
 drivers/net/ena/Makefile                      |   30 -
 drivers/net/enetc/Makefile                    |   23 -
 drivers/net/enic/Makefile                     |   68 -
 drivers/net/failsafe/Makefile                 |   43 -
 drivers/net/fm10k/Makefile                    |   77 --
 drivers/net/hinic/Makefile                    |   67 -
 drivers/net/hns3/Makefile                     |   42 -
 drivers/net/i40e/Makefile                     |  112 --
 drivers/net/i40e/i40e_rxtx.c                  |    1 -
 drivers/net/iavf/Makefile                     |   54 -
 drivers/net/ice/Makefile                      |   96 --
 drivers/net/igc/Makefile                      |   40 -
 drivers/net/ionic/Makefile                    |   31 -
 drivers/net/ipn3ke/Makefile                   |   38 -
 drivers/net/ixgbe/Makefile                    |  110 --
 drivers/net/kni/Makefile                      |   30 -
 drivers/net/liquidio/Makefile                 |   30 -
 drivers/net/memif/Makefile                    |   26 -
 drivers/net/mlx4/Makefile                     |  142 --
 drivers/net/mlx5/Makefile                     |   82 --
 drivers/net/mvneta/Makefile                   |   39 -
 drivers/net/mvpp2/Makefile                    |   42 -
 drivers/net/netvsc/Makefile                   |   21 -
 drivers/net/nfb/Makefile                      |   40 -
 drivers/net/nfp/Makefile                      |   41 -
 drivers/net/null/Makefile                     |   24 -
 drivers/net/octeontx/Makefile                 |   53 -
 drivers/net/octeontx2/Makefile                |   63 -
 drivers/net/pcap/Makefile                     |   32 -
 drivers/net/pfe/Makefile                      |   31 -
 drivers/net/qede/Makefile                     |  109 --
 drivers/net/ring/Makefile                     |   29 -
 drivers/net/sfc/Makefile                      |  133 --
 drivers/net/softnic/Makefile                  |   54 -
 drivers/net/szedata2/Makefile                 |   30 -
 drivers/net/tap/Makefile                      |   97 --
 drivers/net/thunderx/Makefile                 |   41 -
 drivers/net/vdev_netvsc/Makefile              |   30 -
 drivers/net/vhost/Makefile                    |   31 -
 drivers/net/virtio/Makefile                   |   82 --
 drivers/net/vmxnet3/Makefile                  |   53 -
 drivers/raw/Makefile                          |   18 -
 drivers/raw/dpaa2_cmdif/Makefile              |   35 -
 drivers/raw/dpaa2_qdma/Makefile               |   36 -
 drivers/raw/ifpga/Makefile                    |   39 -
 drivers/raw/ifpga/base/Makefile               |   32 -
 drivers/raw/ioat/Makefile                     |   28 -
 drivers/raw/ntb/Makefile                      |   28 -
 drivers/raw/octeontx2_dma/Makefile            |   34 -
 drivers/raw/octeontx2_ep/Makefile             |   42 -
 drivers/raw/skeleton/Makefile                 |   26 -
 drivers/regex/Makefile                        |    8 -
 drivers/regex/mlx5/Makefile                   |   41 -
 drivers/vdpa/Makefile                         |   12 -
 drivers/vdpa/ifc/Makefile                     |   33 -
 drivers/vdpa/mlx5/Makefile                    |   58 -
 examples/Makefile                             |   90 --
 examples/bbdev_app/Makefile                   |   23 +-
 examples/bond/Makefile                        |   34 +-
 examples/bpf/t2.c                             |    6 +-
 examples/bpf/t3.c                             |   10 +-
 examples/cmdline/Makefile                     |   29 +-
 examples/distributor/Makefile                 |   30 +-
 examples/ethtool/Makefile                     |   26 +-
 examples/ethtool/ethtool-app/Makefile         |   56 +-
 examples/ethtool/lib/Makefile                 |   62 +-
 examples/eventdev_pipeline/Makefile           |   23 +-
 examples/fips_validation/Makefile             |   34 +-
 examples/flow_classify/Makefile               |   29 +-
 examples/flow_filtering/Makefile              |   23 +-
 examples/helloworld/Makefile                  |   23 +-
 examples/ioat/Makefile                        |   22 +-
 examples/ip_fragmentation/Makefile            |   29 +-
 examples/ip_pipeline/Makefile                 |   36 +-
 examples/ip_reassembly/Makefile               |   29 +-
 examples/ipsec-secgw/Makefile                 |   36 +-
 examples/ipsec-secgw/test/common_defs.sh      |    4 +-
 examples/ipv4_multicast/Makefile              |   29 +-
 examples/kni/Makefile                         |   27 +-
 examples/l2fwd-cat/Makefile                   |   38 +-
 examples/l2fwd-crypto/Makefile                |   28 +-
 examples/l2fwd-event/Makefile                 |   22 +-
 examples/l2fwd-jobstats/Makefile              |   23 +-
 examples/l2fwd-keepalive/Makefile             |   23 +-
 examples/l2fwd-keepalive/ka-agent/Makefile    |   51 +-
 examples/l2fwd/Makefile                       |   23 +-
 examples/l3fwd-acl/Makefile                   |   28 +-
 examples/l3fwd-graph/Makefile                 |   23 +-
 examples/l3fwd-power/Makefile                 |   36 +-
 examples/l3fwd/Makefile                       |   23 +-
 examples/link_status_interrupt/Makefile       |   22 +-
 examples/multi_process/Makefile               |   21 +-
 .../multi_process/client_server_mp/Makefile   |   19 +-
 .../client_server_mp/mp_client/Makefile       |   44 +-
 .../client_server_mp/mp_server/Makefile       |   51 +-
 examples/multi_process/hotplug_mp/Makefile    |   46 +-
 examples/multi_process/simple_mp/Makefile     |   44 +-
 examples/multi_process/symmetric_mp/Makefile  |   44 +-
 examples/ntb/Makefile                         |   32 +-
 examples/packet_ordering/Makefile             |   22 +-
 examples/performance-thread/Makefile          |   21 +-
 examples/performance-thread/common/common.mk  |    6 +-
 .../performance-thread/l3fwd-thread/Makefile  |   47 +-
 .../performance-thread/pthread_shim/Makefile  |   56 +-
 examples/ptpclient/Makefile                   |   28 +-
 examples/qos_meter/Makefile                   |   28 +-
 examples/qos_sched/Makefile                   |   31 +-
 examples/rxtx_callbacks/Makefile              |   31 +-
 examples/server_node_efd/Makefile             |   18 +-
 examples/server_node_efd/node/Makefile        |   46 +-
 examples/server_node_efd/server/Makefile      |   51 +-
 examples/service_cores/Makefile               |   28 +-
 examples/skeleton/Makefile                    |   29 +-
 examples/tep_termination/Makefile             |   27 +-
 examples/timer/Makefile                       |   28 +-
 examples/vdpa/Makefile                        |   32 +-
 examples/vhost/Makefile                       |   30 +-
 examples/vhost_blk/Makefile                   |   31 +-
 examples/vhost_crypto/Makefile                |   31 +-
 examples/vm_power_manager/Makefile            |   74 +-
 examples/vm_power_manager/guest_cli/Makefile  |   50 +-
 examples/vmdq/Makefile                        |   23 +-
 examples/vmdq_dcb/Makefile                    |   31 +-
 kernel/Makefile                               |    9 -
 kernel/freebsd/Makefile                       |    9 -
 kernel/freebsd/contigmem/Makefile             |   24 -
 kernel/freebsd/nic_uio/Makefile               |   24 -
 kernel/linux/Makefile                         |    9 -
 kernel/linux/igb_uio/Makefile                 |   25 -
 kernel/linux/kni/Makefile                     |   34 -
 lib/Makefile                                  |  138 --
 lib/librte_acl/Makefile                       |   65 -
 lib/librte_bbdev/Makefile                     |   25 -
 lib/librte_bitratestats/Makefile              |   20 -
 lib/librte_bpf/Makefile                       |   40 -
 lib/librte_cfgfile/Makefile                   |   26 -
 lib/librte_cmdline/Makefile                   |   34 -
 lib/librte_compressdev/Makefile               |   27 -
 lib/librte_cryptodev/Makefile                 |   30 -
 lib/librte_distributor/Makefile               |   28 -
 lib/librte_eal/Makefile                       |   12 -
 lib/librte_eal/freebsd/Makefile               |  104 --
 lib/librte_eal/include/Makefile               |   19 -
 lib/librte_eal/linux/Makefile                 |  112 --
 lib/librte_efd/Makefile                       |   21 -
 lib/librte_ethdev/Makefile                    |   46 -
 lib/librte_eventdev/Makefile                  |   47 -
 lib/librte_fib/Makefile                       |   22 -
 lib/librte_flow_classify/Makefile             |   23 -
 lib/librte_graph/Makefile                     |   28 -
 lib/librte_gro/Makefile                       |   23 -
 lib/librte_gso/Makefile                       |   25 -
 lib/librte_hash/Makefile                      |   31 -
 lib/librte_ip_frag/Makefile                   |   27 -
 lib/librte_ipsec/Makefile                     |   29 -
 lib/librte_jobstats/Makefile                  |   21 -
 lib/librte_kni/Makefile                       |   20 -
 lib/librte_kvargs/Makefile                    |   21 -
 lib/librte_latencystats/Makefile              |   22 -
 lib/librte_lpm/Makefile                       |   29 -
 lib/librte_mbuf/Makefile                      |   26 -
 lib/librte_member/Makefile                    |   22 -
 lib/librte_mempool/Makefile                   |   24 -
 lib/librte_mempool/rte_mempool.h              |    2 +-
 lib/librte_meter/Makefile                     |   27 -
 lib/librte_metrics/Makefile                   |   30 -
 lib/librte_net/Makefile                       |   25 -
 lib/librte_node/Makefile                      |   33 -
 lib/librte_pci/Makefile                       |   19 -
 lib/librte_pdump/Makefile                     |   20 -
 lib/librte_pipeline/Makefile                  |   28 -
 lib/librte_port/Makefile                      |   59 -
 lib/librte_power/Makefile                     |   24 -
 lib/librte_rawdev/Makefile                    |   24 -
 lib/librte_rcu/Makefile                       |   20 -
 lib/librte_regexdev/Makefile                  |   32 -
 lib/librte_reorder/Makefile                   |   21 -
 lib/librte_rib/Makefile                       |   22 -
 lib/librte_ring/Makefile                      |   30 -
 lib/librte_ring/rte_ring_elem.h               |    3 +-
 lib/librte_sched/Makefile                     |   29 -
 lib/librte_security/Makefile                  |   24 -
 lib/librte_stack/Makefile                     |   27 -
 lib/librte_table/Makefile                     |   59 -
 lib/librte_telemetry/Makefile                 |   30 -
 lib/librte_timer/Makefile                     |   20 -
 lib/librte_vhost/Makefile                     |   54 -
 mk/arch/arm/rte.vars.mk                       |   16 -
 mk/arch/arm64/rte.vars.mk                     |   37 -
 mk/arch/i686/rte.vars.mk                      |   36 -
 mk/arch/ppc_64/rte.vars.mk                    |   17 -
 mk/arch/x86_64/rte.vars.mk                    |   36 -
 mk/arch/x86_x32/rte.vars.mk                   |   40 -
 mk/exec-env/bsdapp                            |    1 -
 mk/exec-env/freebsd/rte.app.mk                |    8 -
 mk/exec-env/freebsd/rte.vars.mk               |   36 -
 mk/exec-env/linux/rte.app.mk                  |    8 -
 mk/exec-env/linux/rte.vars.mk                 |   44 -
 mk/exec-env/linuxapp                          |    1 -
 mk/internal/rte.build-post.mk                 |   34 -
 mk/internal/rte.build-pre.mk                  |    7 -
 mk/internal/rte.clean-post.mk                 |   34 -
 mk/internal/rte.clean-pre.mk                  |    4 -
 mk/internal/rte.compile-post.mk               |    5 -
 mk/internal/rte.compile-pre.mk                |  164 ---
 mk/internal/rte.extvars.mk                    |   55 -
 mk/internal/rte.install-post.mk               |   71 -
 mk/internal/rte.install-pre.mk                |   32 -
 mk/machine/armv7a/rte.vars.mk                 |   36 -
 mk/machine/armv8a/rte.vars.mk                 |   31 -
 mk/machine/default/rte.vars.mk                |   30 -
 mk/machine/dpaa/rte.vars.mk                   |   37 -
 mk/machine/emag/rte.vars.mk                   |   32 -
 mk/machine/hsw/rte.vars.mk                    |   30 -
 mk/machine/ivb/rte.vars.mk                    |   30 -
 mk/machine/n1sdp/rte.vars.mk                  |   34 -
 mk/machine/native/rte.vars.mk                 |   39 -
 mk/machine/nhm/rte.vars.mk                    |   30 -
 mk/machine/octeontx2/rte.vars.mk              |   34 -
 mk/machine/power8/rte.vars.mk                 |   30 -
 mk/machine/silvermont/rte.vars.mk             |   30 -
 mk/machine/snb/rte.vars.mk                    |   30 -
 mk/machine/thunderx/rte.vars.mk               |   31 -
 mk/machine/thunderx2/rte.vars.mk              |   34 -
 mk/machine/wsm/rte.vars.mk                    |   30 -
 mk/machine/xgene1/rte.vars.mk                 |   31 -
 mk/rte.app.mk                                 |  509 --------
 mk/rte.bsdmodule.mk                           |   89 --
 mk/rte.combinedlib.mk                         |   30 -
 mk/rte.cpuflags.mk                            |  124 --
 mk/rte.extapp.mk                              |   24 -
 mk/rte.extlib.mk                              |   26 -
 mk/rte.extobj.mk                              |   24 -
 mk/rte.extshared.mk                           |   26 -
 mk/rte.extsubdir.mk                           |   39 -
 mk/rte.gnuconfigure.mk                        |   44 -
 mk/rte.helper.mk                              |   10 -
 mk/rte.hostapp.mk                             |   93 --
 mk/rte.hostlib.mk                             |   86 --
 mk/rte.install.mk                             |   28 -
 mk/rte.lib.mk                                 |  156 ---
 mk/rte.module.mk                              |   86 --
 mk/rte.obj.mk                                 |   82 --
 mk/rte.sdkbuild.mk                            |   77 --
 mk/rte.sdkconfig.mk                           |  142 --
 mk/rte.sdkdepdirs.mk                          |    9 -
 mk/rte.sdkdoc.mk                              |  104 --
 mk/rte.sdkexamples.mk                         |   50 -
 mk/rte.sdkgcov.mk                             |   39 -
 mk/rte.sdkinstall.mk                          |  152 ---
 mk/rte.sdkroot.mk                             |  115 --
 mk/rte.sdktest.mk                             |   76 --
 mk/rte.shared.mk                              |  108 --
 mk/rte.subdir.mk                              |   65 -
 mk/rte.vars.mk                                |  102 --
 mk/target/generic/rte.app.mk                  |   13 -
 mk/target/generic/rte.vars.mk                 |  132 --
 mk/toolchain/clang/rte.toolchain-compat.mk    |   22 -
 mk/toolchain/clang/rte.vars.mk                |   60 -
 mk/toolchain/gcc/rte.toolchain-compat.mk      |  120 --
 mk/toolchain/gcc/rte.vars.mk                  |  109 --
 mk/toolchain/icc/rte.toolchain-compat.mk      |   58 -
 mk/toolchain/icc/rte.vars.mk                  |   62 -
 615 files changed, 1228 insertions(+), 19894 deletions(-)
 delete mode 100644 GNUmakefile
 delete mode 100644 app/Makefile
 delete mode 100644 app/pdump/Makefile
 delete mode 100644 app/proc-info/Makefile
 delete mode 100644 app/test-acl/Makefile
 delete mode 100644 app/test-bbdev/Makefile
 delete mode 100644 app/test-cmdline/Makefile
 delete mode 100644 app/test-compress-perf/Makefile
 delete mode 100644 app/test-crypto-perf/Makefile
 delete mode 100644 app/test-eventdev/Makefile
 delete mode 100644 app/test-fib/Makefile
 delete mode 100644 app/test-flow-perf/Makefile
 delete mode 100644 app/test-pipeline/Makefile
 delete mode 100644 app/test-pmd/Makefile
 delete mode 100644 app/test-regex/Makefile
 delete mode 100644 app/test-sad/Makefile
 delete mode 100644 app/test/Makefile
 delete mode 100644 buildtools/Makefile
 delete mode 100755 buildtools/auto-config-h.sh
 delete mode 100755 buildtools/gen-build-mk.sh
 delete mode 100755 buildtools/gen-config-h.sh
 delete mode 100644 buildtools/pmdinfogen/Makefile
 delete mode 100755 buildtools/relpath.sh
 delete mode 100644 config/common_armv8a_linux
 delete mode 100644 config/common_base
 delete mode 100644 config/common_freebsd
 delete mode 100644 config/common_linux
 delete mode 120000 config/defconfig_arm-armv7a-linux-gcc
 delete mode 100644 config/defconfig_arm-armv7a-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-armada-linux-gcc
 delete mode 100644 config/defconfig_arm64-armada-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-armv8a-linux-clang
 delete mode 120000 config/defconfig_arm64-armv8a-linux-gcc
 delete mode 100644 config/defconfig_arm64-armv8a-linuxapp-clang
 delete mode 100644 config/defconfig_arm64-armv8a-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-bluefield-linux-gcc
 delete mode 100644 config/defconfig_arm64-bluefield-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-dpaa-linux-gcc
 delete mode 100644 config/defconfig_arm64-dpaa-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-emag-linux-gcc
 delete mode 100644 config/defconfig_arm64-emag-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-n1sdp-linux-gcc
 delete mode 100644 config/defconfig_arm64-n1sdp-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-octeontx2-linux-gcc
 delete mode 100644 config/defconfig_arm64-octeontx2-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-stingray-linux-gcc
 delete mode 100644 config/defconfig_arm64-stingray-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-thunderx-linux-gcc
 delete mode 100644 config/defconfig_arm64-thunderx-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-thunderx2-linux-gcc
 delete mode 100644 config/defconfig_arm64-thunderx2-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-xgene1-linux-gcc
 delete mode 100644 config/defconfig_arm64-xgene1-linuxapp-gcc
 delete mode 120000 config/defconfig_i686-native-linux-gcc
 delete mode 120000 config/defconfig_i686-native-linux-icc
 delete mode 100644 config/defconfig_i686-native-linuxapp-gcc
 delete mode 100644 config/defconfig_i686-native-linuxapp-icc
 delete mode 120000 config/defconfig_ppc_64-power8-linux-gcc
 delete mode 100644 config/defconfig_ppc_64-power8-linuxapp-gcc
 delete mode 100644 config/defconfig_x86_64-native-bsdapp-clang
 delete mode 100644 config/defconfig_x86_64-native-bsdapp-gcc
 delete mode 120000 config/defconfig_x86_64-native-freebsd-clang
 delete mode 120000 config/defconfig_x86_64-native-freebsd-gcc
 delete mode 120000 config/defconfig_x86_64-native-linux-clang
 delete mode 120000 config/defconfig_x86_64-native-linux-gcc
 delete mode 120000 config/defconfig_x86_64-native-linux-icc
 delete mode 100644 config/defconfig_x86_64-native-linuxapp-clang
 delete mode 100644 config/defconfig_x86_64-native-linuxapp-gcc
 delete mode 100644 config/defconfig_x86_64-native-linuxapp-icc
 delete mode 120000 config/defconfig_x86_x32-native-linux-gcc
 delete mode 100644 config/defconfig_x86_x32-native-linuxapp-gcc
 delete mode 100755 devtools/test-build.sh
 delete mode 100644 doc/guides/prog_guide/dev_kit_build_system.rst
 delete mode 100644 doc/guides/prog_guide/dev_kit_root_make_help.rst
 rename doc/guides/prog_guide/{ext_app_lib_make_help.rst => ext_app_make_help.rst} (69%)
 delete mode 100644 drivers/Makefile
 delete mode 100644 drivers/baseband/Makefile
 delete mode 100644 drivers/baseband/fpga_5gnr_fec/Makefile
 delete mode 100644 drivers/baseband/fpga_lte_fec/Makefile
 delete mode 100644 drivers/baseband/null/Makefile
 delete mode 100644 drivers/baseband/turbo_sw/Makefile
 delete mode 100644 drivers/bus/Makefile
 delete mode 100644 drivers/bus/dpaa/Makefile
 delete mode 100644 drivers/bus/fslmc/Makefile
 delete mode 100644 drivers/bus/ifpga/Makefile
 delete mode 100644 drivers/bus/pci/Makefile
 delete mode 100644 drivers/bus/pci/bsd/Makefile
 delete mode 100644 drivers/bus/pci/linux/Makefile
 delete mode 100644 drivers/bus/vdev/Makefile
 delete mode 100644 drivers/bus/vmbus/Makefile
 delete mode 100644 drivers/bus/vmbus/linux/Makefile
 delete mode 100644 drivers/common/Makefile
 delete mode 100644 drivers/common/cpt/Makefile
 delete mode 100644 drivers/common/dpaax/Makefile
 delete mode 100644 drivers/common/iavf/Makefile
 delete mode 100644 drivers/common/mlx5/Makefile
 delete mode 100644 drivers/common/mvep/Makefile
 delete mode 100644 drivers/common/octeontx/Makefile
 delete mode 100644 drivers/common/octeontx2/Makefile
 delete mode 100644 drivers/common/qat/Makefile
 delete mode 100644 drivers/compress/Makefile
 delete mode 100644 drivers/compress/isal/Makefile
 delete mode 100644 drivers/compress/octeontx/Makefile
 delete mode 100644 drivers/compress/zlib/Makefile
 delete mode 100644 drivers/crypto/Makefile
 delete mode 100644 drivers/crypto/aesni_gcm/Makefile
 delete mode 100644 drivers/crypto/aesni_mb/Makefile
 delete mode 100644 drivers/crypto/armv8/Makefile
 delete mode 100644 drivers/crypto/caam_jr/Makefile
 delete mode 100644 drivers/crypto/ccp/Makefile
 delete mode 100644 drivers/crypto/dpaa2_sec/Makefile
 delete mode 100644 drivers/crypto/dpaa_sec/Makefile
 delete mode 100644 drivers/crypto/kasumi/Makefile
 delete mode 100644 drivers/crypto/mvsam/Makefile
 delete mode 100644 drivers/crypto/nitrox/Makefile
 delete mode 100644 drivers/crypto/null/Makefile
 delete mode 100644 drivers/crypto/octeontx/Makefile
 delete mode 100644 drivers/crypto/octeontx2/Makefile
 delete mode 100644 drivers/crypto/openssl/Makefile
 delete mode 100644 drivers/crypto/scheduler/Makefile
 delete mode 100644 drivers/crypto/snow3g/Makefile
 delete mode 100644 drivers/crypto/virtio/Makefile
 delete mode 100644 drivers/crypto/zuc/Makefile
 delete mode 100644 drivers/event/Makefile
 delete mode 100644 drivers/event/dpaa/Makefile
 delete mode 100644 drivers/event/dpaa2/Makefile
 delete mode 100644 drivers/event/dsw/Makefile
 delete mode 100644 drivers/event/octeontx/Makefile
 delete mode 100644 drivers/event/octeontx2/Makefile
 delete mode 100644 drivers/event/opdl/Makefile
 delete mode 100644 drivers/event/skeleton/Makefile
 delete mode 100644 drivers/event/sw/Makefile
 delete mode 100644 drivers/mempool/Makefile
 delete mode 100644 drivers/mempool/bucket/Makefile
 delete mode 100644 drivers/mempool/dpaa/Makefile
 delete mode 100644 drivers/mempool/dpaa2/Makefile
 delete mode 100644 drivers/mempool/octeontx/Makefile
 delete mode 100644 drivers/mempool/octeontx2/Makefile
 delete mode 100644 drivers/mempool/ring/Makefile
 delete mode 100644 drivers/mempool/stack/Makefile
 delete mode 100644 drivers/net/Makefile
 delete mode 100644 drivers/net/af_packet/Makefile
 delete mode 100644 drivers/net/af_xdp/Makefile
 delete mode 100644 drivers/net/ark/Makefile
 delete mode 100644 drivers/net/atlantic/Makefile
 delete mode 100644 drivers/net/avp/Makefile
 delete mode 100644 drivers/net/axgbe/Makefile
 delete mode 100644 drivers/net/bnx2x/Makefile
 delete mode 100644 drivers/net/bnxt/Makefile
 delete mode 100644 drivers/net/bnxt/hcapi/Makefile
 delete mode 100644 drivers/net/bnxt/tf_core/Makefile
 delete mode 100644 drivers/net/bnxt/tf_ulp/Makefile
 delete mode 100644 drivers/net/bonding/Makefile
 delete mode 100644 drivers/net/cxgbe/Makefile
 delete mode 100644 drivers/net/dpaa/Makefile
 delete mode 100644 drivers/net/dpaa2/Makefile
 delete mode 100644 drivers/net/e1000/Makefile
 delete mode 100644 drivers/net/ena/Makefile
 delete mode 100644 drivers/net/enetc/Makefile
 delete mode 100644 drivers/net/enic/Makefile
 delete mode 100644 drivers/net/failsafe/Makefile
 delete mode 100644 drivers/net/fm10k/Makefile
 delete mode 100644 drivers/net/hinic/Makefile
 delete mode 100644 drivers/net/hns3/Makefile
 delete mode 100644 drivers/net/i40e/Makefile
 delete mode 100644 drivers/net/iavf/Makefile
 delete mode 100644 drivers/net/ice/Makefile
 delete mode 100644 drivers/net/igc/Makefile
 delete mode 100644 drivers/net/ionic/Makefile
 delete mode 100644 drivers/net/ipn3ke/Makefile
 delete mode 100644 drivers/net/ixgbe/Makefile
 delete mode 100644 drivers/net/kni/Makefile
 delete mode 100644 drivers/net/liquidio/Makefile
 delete mode 100644 drivers/net/memif/Makefile
 delete mode 100644 drivers/net/mlx4/Makefile
 delete mode 100644 drivers/net/mlx5/Makefile
 delete mode 100644 drivers/net/mvneta/Makefile
 delete mode 100644 drivers/net/mvpp2/Makefile
 delete mode 100644 drivers/net/netvsc/Makefile
 delete mode 100644 drivers/net/nfb/Makefile
 delete mode 100644 drivers/net/nfp/Makefile
 delete mode 100644 drivers/net/null/Makefile
 delete mode 100644 drivers/net/octeontx/Makefile
 delete mode 100644 drivers/net/octeontx2/Makefile
 delete mode 100644 drivers/net/pcap/Makefile
 delete mode 100644 drivers/net/pfe/Makefile
 delete mode 100644 drivers/net/qede/Makefile
 delete mode 100644 drivers/net/ring/Makefile
 delete mode 100644 drivers/net/sfc/Makefile
 delete mode 100644 drivers/net/softnic/Makefile
 delete mode 100644 drivers/net/szedata2/Makefile
 delete mode 100644 drivers/net/tap/Makefile
 delete mode 100644 drivers/net/thunderx/Makefile
 delete mode 100644 drivers/net/vdev_netvsc/Makefile
 delete mode 100644 drivers/net/vhost/Makefile
 delete mode 100644 drivers/net/virtio/Makefile
 delete mode 100644 drivers/net/vmxnet3/Makefile
 delete mode 100644 drivers/raw/Makefile
 delete mode 100644 drivers/raw/dpaa2_cmdif/Makefile
 delete mode 100644 drivers/raw/dpaa2_qdma/Makefile
 delete mode 100644 drivers/raw/ifpga/Makefile
 delete mode 100644 drivers/raw/ifpga/base/Makefile
 delete mode 100644 drivers/raw/ioat/Makefile
 delete mode 100644 drivers/raw/ntb/Makefile
 delete mode 100644 drivers/raw/octeontx2_dma/Makefile
 delete mode 100644 drivers/raw/octeontx2_ep/Makefile
 delete mode 100644 drivers/raw/skeleton/Makefile
 delete mode 100644 drivers/regex/Makefile
 delete mode 100644 drivers/regex/mlx5/Makefile
 delete mode 100644 drivers/vdpa/Makefile
 delete mode 100644 drivers/vdpa/ifc/Makefile
 delete mode 100644 drivers/vdpa/mlx5/Makefile
 delete mode 100644 examples/Makefile
 delete mode 100644 kernel/Makefile
 delete mode 100644 kernel/freebsd/Makefile
 delete mode 100644 kernel/freebsd/contigmem/Makefile
 delete mode 100644 kernel/freebsd/nic_uio/Makefile
 delete mode 100644 kernel/linux/Makefile
 delete mode 100644 kernel/linux/igb_uio/Makefile
 delete mode 100644 kernel/linux/kni/Makefile
 delete mode 100644 lib/Makefile
 delete mode 100644 lib/librte_acl/Makefile
 delete mode 100644 lib/librte_bbdev/Makefile
 delete mode 100644 lib/librte_bitratestats/Makefile
 delete mode 100644 lib/librte_bpf/Makefile
 delete mode 100644 lib/librte_cfgfile/Makefile
 delete mode 100644 lib/librte_cmdline/Makefile
 delete mode 100644 lib/librte_compressdev/Makefile
 delete mode 100644 lib/librte_cryptodev/Makefile
 delete mode 100644 lib/librte_distributor/Makefile
 delete mode 100644 lib/librte_eal/Makefile
 delete mode 100644 lib/librte_eal/freebsd/Makefile
 delete mode 100644 lib/librte_eal/include/Makefile
 delete mode 100644 lib/librte_eal/linux/Makefile
 delete mode 100644 lib/librte_efd/Makefile
 delete mode 100644 lib/librte_ethdev/Makefile
 delete mode 100644 lib/librte_eventdev/Makefile
 delete mode 100644 lib/librte_fib/Makefile
 delete mode 100644 lib/librte_flow_classify/Makefile
 delete mode 100644 lib/librte_graph/Makefile
 delete mode 100644 lib/librte_gro/Makefile
 delete mode 100644 lib/librte_gso/Makefile
 delete mode 100644 lib/librte_hash/Makefile
 delete mode 100644 lib/librte_ip_frag/Makefile
 delete mode 100644 lib/librte_ipsec/Makefile
 delete mode 100644 lib/librte_jobstats/Makefile
 delete mode 100644 lib/librte_kni/Makefile
 delete mode 100644 lib/librte_kvargs/Makefile
 delete mode 100644 lib/librte_latencystats/Makefile
 delete mode 100644 lib/librte_lpm/Makefile
 delete mode 100644 lib/librte_mbuf/Makefile
 delete mode 100644 lib/librte_member/Makefile
 delete mode 100644 lib/librte_mempool/Makefile
 delete mode 100644 lib/librte_meter/Makefile
 delete mode 100644 lib/librte_metrics/Makefile
 delete mode 100644 lib/librte_net/Makefile
 delete mode 100644 lib/librte_node/Makefile
 delete mode 100644 lib/librte_pci/Makefile
 delete mode 100644 lib/librte_pdump/Makefile
 delete mode 100644 lib/librte_pipeline/Makefile
 delete mode 100644 lib/librte_port/Makefile
 delete mode 100644 lib/librte_power/Makefile
 delete mode 100644 lib/librte_rawdev/Makefile
 delete mode 100644 lib/librte_rcu/Makefile
 delete mode 100644 lib/librte_regexdev/Makefile
 delete mode 100644 lib/librte_reorder/Makefile
 delete mode 100644 lib/librte_rib/Makefile
 delete mode 100644 lib/librte_ring/Makefile
 delete mode 100644 lib/librte_sched/Makefile
 delete mode 100644 lib/librte_security/Makefile
 delete mode 100644 lib/librte_stack/Makefile
 delete mode 100644 lib/librte_table/Makefile
 delete mode 100644 lib/librte_telemetry/Makefile
 delete mode 100644 lib/librte_timer/Makefile
 delete mode 100644 lib/librte_vhost/Makefile
 delete mode 100644 mk/arch/arm/rte.vars.mk
 delete mode 100644 mk/arch/arm64/rte.vars.mk
 delete mode 100644 mk/arch/i686/rte.vars.mk
 delete mode 100644 mk/arch/ppc_64/rte.vars.mk
 delete mode 100644 mk/arch/x86_64/rte.vars.mk
 delete mode 100644 mk/arch/x86_x32/rte.vars.mk
 delete mode 120000 mk/exec-env/bsdapp
 delete mode 100644 mk/exec-env/freebsd/rte.app.mk
 delete mode 100644 mk/exec-env/freebsd/rte.vars.mk
 delete mode 100644 mk/exec-env/linux/rte.app.mk
 delete mode 100644 mk/exec-env/linux/rte.vars.mk
 delete mode 120000 mk/exec-env/linuxapp
 delete mode 100644 mk/internal/rte.build-post.mk
 delete mode 100644 mk/internal/rte.build-pre.mk
 delete mode 100644 mk/internal/rte.clean-post.mk
 delete mode 100644 mk/internal/rte.clean-pre.mk
 delete mode 100644 mk/internal/rte.compile-post.mk
 delete mode 100644 mk/internal/rte.compile-pre.mk
 delete mode 100644 mk/internal/rte.extvars.mk
 delete mode 100644 mk/internal/rte.install-post.mk
 delete mode 100644 mk/internal/rte.install-pre.mk
 delete mode 100644 mk/machine/armv7a/rte.vars.mk
 delete mode 100644 mk/machine/armv8a/rte.vars.mk
 delete mode 100644 mk/machine/default/rte.vars.mk
 delete mode 100644 mk/machine/dpaa/rte.vars.mk
 delete mode 100644 mk/machine/emag/rte.vars.mk
 delete mode 100644 mk/machine/hsw/rte.vars.mk
 delete mode 100644 mk/machine/ivb/rte.vars.mk
 delete mode 100644 mk/machine/n1sdp/rte.vars.mk
 delete mode 100644 mk/machine/native/rte.vars.mk
 delete mode 100644 mk/machine/nhm/rte.vars.mk
 delete mode 100644 mk/machine/octeontx2/rte.vars.mk
 delete mode 100644 mk/machine/power8/rte.vars.mk
 delete mode 100644 mk/machine/silvermont/rte.vars.mk
 delete mode 100644 mk/machine/snb/rte.vars.mk
 delete mode 100644 mk/machine/thunderx/rte.vars.mk
 delete mode 100644 mk/machine/thunderx2/rte.vars.mk
 delete mode 100644 mk/machine/wsm/rte.vars.mk
 delete mode 100644 mk/machine/xgene1/rte.vars.mk
 delete mode 100644 mk/rte.app.mk
 delete mode 100644 mk/rte.bsdmodule.mk
 delete mode 100644 mk/rte.combinedlib.mk
 delete mode 100644 mk/rte.cpuflags.mk
 delete mode 100644 mk/rte.extapp.mk
 delete mode 100644 mk/rte.extlib.mk
 delete mode 100644 mk/rte.extobj.mk
 delete mode 100644 mk/rte.extshared.mk
 delete mode 100644 mk/rte.extsubdir.mk
 delete mode 100644 mk/rte.gnuconfigure.mk
 delete mode 100644 mk/rte.helper.mk
 delete mode 100644 mk/rte.hostapp.mk
 delete mode 100644 mk/rte.hostlib.mk
 delete mode 100644 mk/rte.install.mk
 delete mode 100644 mk/rte.lib.mk
 delete mode 100644 mk/rte.module.mk
 delete mode 100644 mk/rte.obj.mk
 delete mode 100644 mk/rte.sdkbuild.mk
 delete mode 100644 mk/rte.sdkconfig.mk
 delete mode 100644 mk/rte.sdkdepdirs.mk
 delete mode 100644 mk/rte.sdkdoc.mk
 delete mode 100644 mk/rte.sdkexamples.mk
 delete mode 100644 mk/rte.sdkgcov.mk
 delete mode 100644 mk/rte.sdkinstall.mk
 delete mode 100644 mk/rte.sdkroot.mk
 delete mode 100644 mk/rte.sdktest.mk
 delete mode 100644 mk/rte.shared.mk
 delete mode 100644 mk/rte.subdir.mk
 delete mode 100644 mk/rte.vars.mk
 delete mode 100644 mk/target/generic/rte.app.mk
 delete mode 100644 mk/target/generic/rte.vars.mk
 delete mode 100644 mk/toolchain/clang/rte.toolchain-compat.mk
 delete mode 100644 mk/toolchain/clang/rte.vars.mk
 delete mode 100644 mk/toolchain/gcc/rte.toolchain-compat.mk
 delete mode 100644 mk/toolchain/gcc/rte.vars.mk
 delete mode 100644 mk/toolchain/icc/rte.toolchain-compat.mk
 delete mode 100644 mk/toolchain/icc/rte.vars.mk
Signature · 1 line
2.17.1
#109 lore raw

PATCH v3 1/37 examples: remove legacy sections of makefiles

The example app makefiles contained sections using the legacy method of compiling with make. These are no longer needed, and are removed, leaving only the section that uses pkg-config for the make build.

---
 examples/bbdev_app/Makefile             | 23 ++-------------
 examples/bond/Makefile                  | 34 ++--------------------
 examples/cmdline/Makefile               | 29 ++-----------------
 examples/distributor/Makefile           | 30 ++-----------------
 examples/eventdev_pipeline/Makefile     | 23 ++-------------
 examples/fips_validation/Makefile       | 34 ++--------------------
 examples/flow_classify/Makefile         | 29 ++-----------------
 examples/flow_filtering/Makefile        | 23 ++-------------
 examples/helloworld/Makefile            | 23 ++-------------
 examples/ioat/Makefile                  | 22 ++------------
 examples/ip_fragmentation/Makefile      | 29 ++-----------------
 examples/ip_pipeline/Makefile           | 36 ++---------------------
 examples/ip_reassembly/Makefile         | 29 ++-----------------
 examples/ipsec-secgw/Makefile           | 36 ++---------------------
 examples/ipv4_multicast/Makefile        | 29 ++-----------------
 examples/kni/Makefile                   | 27 ++----------------
 examples/l2fwd-cat/Makefile             | 38 ++-----------------------
 examples/l2fwd-crypto/Makefile          | 28 ++----------------
 examples/l2fwd-event/Makefile           | 22 ++------------
 examples/l2fwd-jobstats/Makefile        | 23 ++-------------
 examples/l2fwd-keepalive/Makefile       | 23 ++-------------
 examples/l2fwd/Makefile                 | 23 ++-------------
 examples/l3fwd-acl/Makefile             | 28 ++----------------
 examples/l3fwd-graph/Makefile           | 23 ++-------------
 examples/l3fwd-power/Makefile           | 36 ++---------------------
 examples/l3fwd/Makefile                 | 23 ++-------------
 examples/link_status_interrupt/Makefile | 22 ++------------
 examples/ntb/Makefile                   | 32 ++-------------------
 examples/packet_ordering/Makefile       | 22 ++------------
 examples/ptpclient/Makefile             | 28 ++----------------
 examples/qos_meter/Makefile             | 28 ++----------------
 examples/qos_sched/Makefile             | 31 ++------------------
 examples/rxtx_callbacks/Makefile        | 31 ++------------------
 examples/service_cores/Makefile         | 28 ++----------------
 examples/skeleton/Makefile              | 29 ++-----------------
 examples/tep_termination/Makefile       | 27 ++----------------
 examples/timer/Makefile                 | 28 ++----------------
 examples/vdpa/Makefile                  | 32 ++-------------------
 examples/vhost/Makefile                 | 30 ++-----------------
 examples/vhost_blk/Makefile             | 31 ++------------------
 examples/vhost_crypto/Makefile          | 31 ++------------------
 examples/vmdq/Makefile                  | 23 ++-------------
 examples/vmdq_dcb/Makefile              | 31 ++------------------
 43 files changed, 129 insertions(+), 1078 deletions(-)
examples/bbdev_app/Makefile +3 -20
index 3c8eb75a4e..2f156736d1 100644
@@ -8,7 +8,9 @@ APP = bbdev
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -39,22 +41,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/bond/Makefile +3 -31
index 4e4289e151..4e560f574c 100644
@@ -8,7 +8,9 @@ APP = bond_app
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -41,33 +43,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += $(WERROR_FLAGS)
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-CFLAGS += -O3
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y)
-LDLIBS += -lrte_pmd_bond
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/cmdline/Makefile +3 -26
index 7325097722..d8f51fb39b 100644
@@ -8,7 +8,9 @@ APP = cmdline
 SRCS-y := main.c commands.c parse_obj_list.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,28 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# binary name
-APP = cmdline
-
-# all source are stored in SRCS-y
-SRCS-y := main.c commands.c parse_obj_list.c
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/distributor/Makefile +3 -27
index 6e3fef9813..4116064581 100644
@@ -8,7 +8,9 @@ APP = distributor_app
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,29 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-EXTRA_CFLAGS += -O3 -Wfatal-errors
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/eventdev_pipeline/Makefile +3 -20
index 95a8d0884a..05c6f865ad 100644
@@ -10,7 +10,9 @@ SRCS-y += pipeline_worker_generic.c
 SRCS-y += pipeline_worker_tx.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -39,22 +41,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/fips_validation/Makefile +3 -31
index b44ca2ee62..7ba9bcfea6 100644
@@ -18,7 +18,9 @@ SRCS-y += fips_validation_xts.c
 SRCS-y += main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -47,33 +49,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-INC += $(sort $(wildcard *.h))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += $(WERROR_FLAGS)
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -I$(SRCDIR)
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/flow_classify/Makefile +3 -26
index 161d576b60..4c215daf1b 100644
@@ -8,7 +8,9 @@ APP = flow_classify
 SRCS-y := flow_classify.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -39,28 +41,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/flow_filtering/Makefile +3 -20
index 010a1383e2..0577e52985 100644
@@ -6,7 +6,9 @@ APP = flow
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -35,22 +37,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/helloworld/Makefile +3 -20
index 94a1074cf6..2eef6e4527 100644
@@ -8,7 +8,9 @@ APP = helloworld
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,22 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/ioat/Makefile +3 -19
index 86308854ea..9645c27d2f 100644
@@ -8,7 +8,9 @@ APP = ioatfwd
 SRCS-y := ioatfwd.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,21 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/ip_fragmentation/Makefile +3 -26
index 3f4db3f59d..f6baf635bb 100644
@@ -9,7 +9,9 @@ APP = ip_fragmentation
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -39,28 +41,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/ip_pipeline/Makefile +3 -33
index 1116bb6c18..d25e39a464 100644
@@ -21,7 +21,9 @@ SRCS-y += tmgr.c
 SRCS-y += cryptodev.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -57,35 +59,3 @@ build:
 clean:
 	rm -f build/$(APP)* build/*.o
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-clean:
-else
-
-INC += $(sort $(wildcard *.h))
-
-SRCS-$(CONFIG_RTE_LIBRTE_PIPELINE) := $(SRCS-y)
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -I$(SRCDIR)
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
-endif
examples/ip_reassembly/Makefile +3 -26
index be9e541bd6..479b802907 100644
@@ -9,7 +9,9 @@ APP = ip_reassembly
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -38,28 +40,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/ipsec-secgw/Makefile +3 -33
index b5ccbca858..5e6cb51eac 100644
@@ -23,7 +23,9 @@ SRCS-y += flow.c
 CFLAGS += -gdwarf-2
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -54,35 +56,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(MAKECMDGOALS),clean)
-ifneq ($(CONFIG_RTE_LIBRTE_IPSEC),y)
-$(error "RTE_LIBRTE_IPSEC is required to build ipsec-secgw")
-endif
-endif
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -O3 -gdwarf-2
-CFLAGS += $(WERROR_FLAGS)
-ifeq ($(CONFIG_RTE_TOOLCHAIN_ICC),y)
-CFLAGS_sa.o += -diag-disable=vec
-endif
-
-ifeq ($(DEBUG),1)
-CFLAGS += -DIPSEC_DEBUG -fstack-protector-all -O0
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/ipv4_multicast/Makefile +3 -26
index 0ed78c1cc2..fb1ebdd433 100644
@@ -9,7 +9,9 @@ APP = ipv4_multicast
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -38,28 +40,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/kni/Makefile +3 -24
index 8fcb67c619..fa9fa85319 100644
@@ -8,7 +8,9 @@ APP = kni
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -38,26 +40,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-endif
-
-CFLAGS += -O3
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/l2fwd-cat/Makefile +3 -35
index d767a10d7d..c5f82fb548 100644
@@ -8,7 +8,9 @@ APP = l2fwd-cat
 SRCS-y := l2fwd-cat.c cat.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -39,37 +41,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-ifeq ($(PQOS_INSTALL_PATH),)
-$(error "Please define PQOS_INSTALL_PATH environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-EXTRA_CFLAGS += -O3 -g -Wfatal-errors
-
-CFLAGS += -I$(PQOS_INSTALL_PATH)/../include
-
-LDLIBS += -L$(PQOS_INSTALL_PATH)
-LDLIBS += -lpqos
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/l2fwd-crypto/Makefile +3 -25
index cdbb91a1e6..4953ee2b95 100644
@@ -8,7 +8,9 @@ APP = l2fwd-crypto
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,27 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y)
-ifeq ($(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER),y)
-LDLIBS += -lrte_pmd_crypto_scheduler
-endif
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/l2fwd-event/Makefile +3 -19
index ddee388ae6..109b7caa4e 100644
@@ -14,7 +14,9 @@ SRCS-y += l2fwd_event_generic.c
 SRCS-y += l2fwd_event_internal_port.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -43,21 +45,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/l2fwd-jobstats/Makefile +3 -20
index bdb83c3e1c..d3ff2d3ee9 100644
@@ -8,7 +8,9 @@ APP = l2fwd-jobstats
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,22 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/l2fwd-keepalive/Makefile +3 -20
index 9fd9db4974..c327efab36 100644
@@ -8,7 +8,9 @@ APP = l2fwd-keepalive
 SRCS-y := main.c shm.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -39,22 +41,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-LDFLAGS += -lrt
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/l2fwd/Makefile +3 -20
index 15105ac57e..b180deb862 100644
@@ -8,7 +8,9 @@ APP = l2fwd
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -39,22 +41,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-# Add flag to allow experimental API as l2fwd uses rte_ethdev_set_ptype API
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/l3fwd-acl/Makefile +3 -25
index 6644a2cf1e..eeb6288dae 100644
@@ -8,7 +8,9 @@ APP = l3fwd-acl
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,27 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/l3fwd-graph/Makefile +3 -20
index f3cf275ece..368ac21147 100644
@@ -8,7 +8,9 @@ APP = l3fwd-graph
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,22 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -I$(SRCDIR)
-CFLAGS += -O3 $(USER_FLAGS)
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/l3fwd-power/Makefile +3 -33
index ac1ccdcf61..d69854c9f8 100644
@@ -8,7 +8,9 @@ APP = l3fwd-power
 SRCS-y := main.c perf_core.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -39,35 +41,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-else
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-LDLIBS += -lm -lrte_telemetry
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
-endif
examples/l3fwd/Makefile +3 -20
index b25a515813..d87eafcd0c 100644
@@ -9,7 +9,9 @@ SRCS-y := main.c l3fwd_lpm.c l3fwd_em.c l3fwd_event.c
 SRCS-y += l3fwd_event_generic.c l3fwd_event_internal_port.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -38,22 +40,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -I$(SRCDIR)
-CFLAGS += -O3 $(USER_FLAGS)
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/link_status_interrupt/Makefile +3 -19
index f16916faa9..b9b02124a4 100644
@@ -8,7 +8,9 @@ APP = link_status_interrupt
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,21 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/ntb/Makefile +3 -29
index 81ec6017f5..4675570fd2 100644
@@ -8,8 +8,9 @@ APP = ntb_fwd
 SRCS-y := ntb_fwd.c
 
 # Build using pkg-config variables if possible
-$(shell pkg-config --exists libdpdk)
-ifeq ($(.SHELLSTATUS),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -42,30 +43,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	rmdir --ignore-fail-on-non-empty build
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
-$(info This application can only operate in a linuxapp environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-else
-
-CFLAGS += -D_FILE_OFFSET_BITS=64
-CFLAGS += -O2
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
-endif
examples/packet_ordering/Makefile +3 -19
index f99b69dc25..e8d6c57b72 100644
@@ -8,7 +8,9 @@ APP = packet_ordering
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,21 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/ptpclient/Makefile +3 -25
index a9555fc66a..86059d8b28 100644
@@ -8,7 +8,9 @@ APP = ptpclient
 SRCS-y := ptpclient.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,27 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/qos_meter/Makefile +3 -25
index 165e07ee25..7a53818296 100644
@@ -8,7 +8,9 @@ APP = qos_meter
 SRCS-y := main.c rte_policer.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -39,27 +41,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/qos_sched/Makefile +3 -28
index 0dd7d91055..408074a9f5 100644
@@ -8,7 +8,9 @@ APP = qos_sched
 SRCS-y := main.c args.c init.c app_thread.c cfg_file.c cmdline.c stats.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,30 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-clean:
-else
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
-endif
examples/rxtx_callbacks/Makefile +3 -28
index 10e5f14d5c..bac3015d34 100644
@@ -8,7 +8,9 @@ APP = rxtx_callbacks
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,30 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += $(WERROR_FLAGS)
-
-# rte_eth_read_clock is experimental
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-EXTRA_CFLAGS += -O3 -g -Wfatal-errors
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/service_cores/Makefile +3 -25
index e742d88f61..beb7ea0b82 100644
@@ -8,7 +8,9 @@ APP = service_cores
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,27 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
examples/skeleton/Makefile +3 -26
index 5f5acf7159..ca52abba42 100644
@@ -8,7 +8,9 @@ APP = basicfwd
 SRCS-y := basicfwd.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,28 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-EXTRA_CFLAGS += -O3 -g -Wfatal-errors
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/tep_termination/Makefile +3 -24
index 548ca3cee3..443bcb190e 100644
@@ -8,7 +8,9 @@ APP = tep_termination
 SRCS-y := main.c vxlan_setup.c vxlan.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -41,26 +43,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-endif
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -Wno-deprecated-declarations
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/timer/Makefile +3 -25
index b40b65995e..0f6523afa6 100644
@@ -8,7 +8,9 @@ APP = timer
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,27 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/vdpa/Makefile +3 -29
index bc0b6793e6..c4b2184ead 100644
@@ -9,7 +9,9 @@ SRCS-y := main.c
 CFLAGS += -DALLOW_EXPERIMENTAL_API
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -38,31 +40,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-else
-
-CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -D_GNU_SOURCE
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif # linuxapp
-
-endif # pkg-config
examples/vhost/Makefile +3 -27
index ef6f3550f3..cec59d0e0f 100644
@@ -8,7 +8,9 @@ APP = vhost-switch
 SRCS-y := main.c virtio_net.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -41,29 +43,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-else
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
-endif
examples/vhost_blk/Makefile +3 -28
index 3952791784..792591386e 100644
@@ -8,8 +8,9 @@ APP = vhost-blk
 SRCS-y := blk.c vhost_blk.c vhost_blk_compat.c
 
 # Build using pkg-config variables if possible
-$(shell pkg-config --exists libdpdk)
-ifeq ($(.SHELLSTATUS),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -42,29 +43,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-else
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
-endif
examples/vhost_crypto/Makefile +3 -28
index 28e3e4de74..27abd91998 100644
@@ -9,7 +9,9 @@ SRCS-y := main.c
 CFLAGS += -DALLOW_EXPERIMENTAL_API
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -38,30 +40,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-else
-
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif # Linux
-
-endif # pkg-config
examples/vmdq/Makefile +3 -20
index b73373d3f5..de527281eb 100644
@@ -8,7 +8,9 @@ APP = vmdq_app
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,22 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-EXTRA_CFLAGS += -O3
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
examples/vmdq_dcb/Makefile +3 -28
index 8d8baf729b..9c9049d85e 100644
@@ -8,7 +8,9 @@ APP = vmdq_dcb_app
 SRCS-y := main.c
 
 # Build using pkg-config variables if possible
-ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
 
 all: shared
 .PHONY: shared static
@@ -37,30 +39,3 @@ build:
 clean:
 	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
 	test -d build && rmdir -p build || true
-
-else # Build using legacy build system
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
-ifeq ($(CONFIG_RTE_TOOLCHAIN_ICC),y)
-CFLAGS_main.o += -diag-disable=vec
-endif
-EXTRA_CFLAGS += -O3 -g
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-endif
Signature · 1 line
2.17.1
#111 lore raw

PATCH v3 2/37 examples/multi_process: convert to pkg-config-based build

In reply to Ciara Power

From: Bruce Richardson <[email protected]>

Remove references to the old make build system and use pkg-config for building these examples.

---
 examples/multi_process/Makefile               | 21 ++------
 .../multi_process/client_server_mp/Makefile   | 19 ++-----
 .../client_server_mp/mp_client/Makefile       | 44 ++++++++++++----
 .../client_server_mp/mp_server/Makefile       | 51 +++++++++++--------
 examples/multi_process/hotplug_mp/Makefile    | 46 ++++++++++++-----
 examples/multi_process/simple_mp/Makefile     | 44 +++++++++++-----
 examples/multi_process/symmetric_mp/Makefile  | 44 +++++++++++-----
 7 files changed, 167 insertions(+), 102 deletions(-)
examples/multi_process/Makefile +5 -16
index 7f7e68d912..f0a999745a 100644
@@ -1,18 +1,7 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
+subdirs := client_server_mp hotplug_mp simple_mp symmetric_mp
 
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
+.PHONY: all static shared clean $(subdirs)
+all static shared clean: $(subdirs)
 
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += client_server_mp
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += simple_mp
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += symmetric_mp
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += hotplug_mp
-
-include $(RTE_SDK)/mk/rte.extsubdir.mk
+$(subdirs):
+	$(MAKE) -C $@ $(MAKECMDGOALS)
examples/multi_process/client_server_mp/Makefile +5 -14
index fe7a8af605..e8debdfd9a 100644
@@ -1,16 +1,7 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
+subdirs := mp_client mp_server
 
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
+.PHONY: all static shared clean $(subdirs)
+all static shared clean: $(subdirs)
 
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += mp_client
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += mp_server
-
-include $(RTE_SDK)/mk/rte.extsubdir.mk
+$(subdirs):
+	$(MAKE) -C $@ $(MAKECMDGOALS)
examples/multi_process/client_server_mp/mp_client/Makefile +33 -11

54 lines not on this page · raw message

examples/multi_process/client_server_mp/mp_server/Makefile +30 -21

64 lines not on this page · raw message

examples/multi_process/hotplug_mp/Makefile +32 -14

54 lines not on this page · raw message

examples/multi_process/simple_mp/Makefile +31 -13

54 lines not on this page · raw message

examples/multi_process/symmetric_mp/Makefile +31 -13

54 lines not on this page · raw message

Signature · 1 line
2.17.1
#112 lore raw

PATCH v3 3/37 examples/server_node_efd: convert to pkg-config-based build

In reply to Ciara Power

From: Kevin Laatz <[email protected]>

Remove references to the old make build system and use pkg-config for building these examples.

---
 examples/server_node_efd/Makefile        | 18 +++------
 examples/server_node_efd/node/Makefile   | 46 +++++++++++++++------
 examples/server_node_efd/server/Makefile | 51 +++++++++++++++---------
 3 files changed, 72 insertions(+), 43 deletions(-)
examples/server_node_efd/Makefile +6 -12
index cc2ea8b566..e4a4a94a79 100644
@@ -1,16 +1,10 @@
 # SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016-2017 Intel Corporation
+# Copyright(c) 2016-2020 Intel Corporation
 
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
+subdirs := node server
 
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
+.PHONY: all static shared clean $(subdirs)
+all static shared clean: $(subdirs)
 
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += server
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += node
-
-include $(RTE_SDK)/mk/rte.extsubdir.mk
+$(subdirs):
+	$(MAKE) -C $@ $(MAKECMDGOALS)
examples/server_node_efd/node/Makefile +34 -12

54 lines not on this page · raw message

examples/server_node_efd/server/Makefile +32 -19

62 lines not on this page · raw message

Signature · 1 line
2.17.1
#113 lore raw

PATCH v3 4/37 examples/ka-agent: convert to pkg-config-based build

In reply to Ciara Power

From: Kevin Laatz <[email protected]>

Remove references to the old make build system and use pkg-config for building these examples.

---
 examples/l2fwd-keepalive/ka-agent/Makefile | 51 ++++++++++++++++------
 1 file changed, 37 insertions(+), 14 deletions(-)
examples/l2fwd-keepalive/ka-agent/Makefile +37 -14
index 8d5061b178..700137c2e2 100644
@@ -1,14 +1,5 @@
 # SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016 Intel Corporation
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
+# Copyright(c) 2016-2020 Intel Corporation
 
 # binary name
 APP = ka-agent
@@ -16,7 +7,39 @@ APP = ka-agent
 # all source are stored in SRCS-y
 SRCS-y := main.c
 
-CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)/../
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-LDFLAGS += -lrt
-include $(RTE_SDK)/mk/rte.extapp.mk
+CFLAGS += -I..
+
+# Build using pkg-config variables if possible
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
+endif
+
+all: shared
+.PHONY: shared static
+shared: build/$(APP)-shared
+	ln -sf $(APP)-shared build/$(APP)
+static: build/$(APP)-static
+	ln -sf $(APP)-static build/$(APP)
+
+LDFLAGS += -lpthread -lrt
+
+PKGCONF ?= pkg-config
+
+PC_FILE := $(shell $(PKGCONF) --path libdpdk 2>/dev/null)
+CFLAGS += -O3 $(shell $(PKGCONF) --cflags libdpdk)
+LDFLAGS_SHARED = $(shell $(PKGCONF) --libs libdpdk)
+LDFLAGS_STATIC = $(shell $(PKGCONF) --static --libs libdpdk)
+
+build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
+	$(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
+
+build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
+	$(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
+
+build:
+	@mkdir -p $@
+
+.PHONY: clean
+clean:
+	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
+	test -d build && rmdir -p build || true
Signature · 1 line
2.17.1
#114 lore raw

PATCH v3 5/37 examples/pthread: convert to pkg-config-based build

In reply to Ciara Power

From: Kevin Laatz <[email protected]>

Remove references to the old make build system and use pkg-config for building these examples.

---
 examples/performance-thread/Makefile          | 21 +++----
 examples/performance-thread/common/common.mk  |  6 +-
 .../performance-thread/l3fwd-thread/Makefile  | 47 +++++++++++-----
 .../performance-thread/pthread_shim/Makefile  | 56 +++++++++++++------
 4 files changed, 83 insertions(+), 47 deletions(-)
examples/performance-thread/Makefile +7 -14
index 08158914c3..ef88722d3c 100644
@@ -1,21 +1,14 @@
 # SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2015 Intel Corporation
+# Copyright(c) 2015-2020 Intel Corporation
 
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
+subdirs := l3fwd-thread pthread_shim
 
-include $(RTE_SDK)/mk/rte.vars.mk
+.PHONY: all static shared clean $(subdirs)
+all static shared clean: $(subdirs)
 
-ifeq ($(filter y,$(CONFIG_RTE_ARCH_X86_64) $(CONFIG_RTE_ARCH_ARM64)),)
+ifeq ($(filter $(shell uname -m),x86_64 arm64),)
 $(error This application is only supported for x86_64 and arm64 targets)
 endif
 
-DIRS-y += l3fwd-thread
-DIRS-y += pthread_shim
-
-
-include $(RTE_SDK)/mk/rte.extsubdir.mk
+$(subdirs):
+	$(MAKE) -C $@ $(MAKECMDGOALS)
examples/performance-thread/common/common.mk +3 -3
index 5e2b18a9ff..a33e2ab038 100644
@@ -8,9 +8,9 @@
 
 MKFILE_PATH=$(abspath $(dir $(lastword $(MAKEFILE_LIST))))
 
-ifeq ($(CONFIG_RTE_ARCH_X86_64),y)
+ifeq ($(shell uname -m),x86_64)
 ARCH_PATH += $(MKFILE_PATH)/arch/x86
-else ifeq ($(CONFIG_RTE_ARCH_ARM64),y)
+else ifeq ($(shell uname -m),arm64)
 ARCH_PATH += $(MKFILE_PATH)/arch/arm64
 endif
 
@@ -18,4 +18,4 @@ VPATH := $(MKFILE_PATH) $(ARCH_PATH)
 
 SRCS-y += lthread.c lthread_sched.c lthread_cond.c lthread_tls.c lthread_mutex.c lthread_diag.c ctx.c
 
-INCLUDES += -I$(MKFILE_PATH) -I$(ARCH_PATH)
+CFLAGS += -I$(MKFILE_PATH) -I$(ARCH_PATH)
examples/performance-thread/l3fwd-thread/Makefile +34 -13

57 lines not on this page · raw message

examples/performance-thread/pthread_shim/Makefile +39 -17

72 lines not on this page · raw message

Signature · 1 line
2.17.1
#115 lore raw

PATCH v3 6/37 examples/vm_power_manager: convert to use DPDK pkg-config

In reply to Ciara Power

From: Bruce Richardson <[email protected]>

Convert the build of the vm_power_manager app over to use DPDK from pkg-config rather than using RTE_SDK/RTE_TARGET.

---
 examples/vm_power_manager/Makefile | 74 ++++++++++++++----------------
 1 file changed, 35 insertions(+), 39 deletions(-)
examples/vm_power_manager/Makefile +35 -39
index 65c2ad179e..87b9744d8c 100644
@@ -1,65 +1,61 @@
 # SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
+# Copyright(c) 2010-2020 Intel Corporation
 
-ifneq ($(shell pkg-config --atleast-version=0.9.3 libvirt; echo $$?), 0)
-$(error vm_power_manager requires libvirt >= 0.9.3)
-else
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
+# Build using pkg-config variables if possible
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
 endif
 
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
 # binary name
 APP = vm_power_mgr
 
 # all source are stored in SRCS-y
 SRCS-y := main.c vm_power_cli.c power_manager.c channel_manager.c
 SRCS-y += channel_monitor.c parse.c
-ifeq ($(CONFIG_RTE_ARCH_X86_64),y)
+ifeq ($(shell uname -m),x86_64)
 SRCS-y += oob_monitor_x86.c
 else
 SRCS-y += oob_monitor_nop.c
 endif
 
-CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
+all: shared
+.PHONY: shared static
+shared: build/$(APP)-shared
+	ln -sf $(APP)-shared build/$(APP)
+static: build/$(APP)-static
+	ln -sf $(APP)-static build/$(APP)
 
-LDLIBS += -lvirt
+PKGCONF ?= pkg-config
 
-JANSSON := $(shell pkg-config --exists jansson; echo $$?)
-ifeq ($(JANSSON), 0)
-LDLIBS += $(shell pkg-config --libs jansson)
-CFLAGS += -DUSE_JANSSON
-endif
+PC_FILE := $(shell $(PKGCONF) --path libdpdk 2>/dev/null)
+CFLAGS += -O3 $(shell $(PKGCONF) --cflags libdpdk)
+LDFLAGS_SHARED = $(shell $(PKGCONF) --libs libdpdk)
+LDFLAGS_STATIC = $(shell $(PKGCONF) --static --libs libdpdk)
 
-ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y)
-
-ifeq ($(CONFIG_RTE_LIBRTE_IXGBE_PMD),y)
-LDLIBS += -lrte_pmd_ixgbe
+ifneq ($(shell $(PKGCONF) --atleast-version=0.9.3 libvirt; echo $$?), 0)
+$(error vm_power_manager requires libvirt >= 0.9.3)
 endif
+LDFLAGS += $(shell $(PKGCONF) --libs libvirt)
 
-ifeq ($(CONFIG_RTE_LIBRTE_I40E_PMD),y)
-LDLIBS += -lrte_pmd_i40e
+JANSSON := $(shell $(PKGCONF) --exists jansson; echo $$?)
+ifeq ($(JANSSON), 0)
+LDFLAGS += $(shell $(PKGCONF) --libs jansson)
+CFLAGS += -DUSE_JANSSON
 endif
 
-ifeq ($(CONFIG_RTE_LIBRTE_BNXT_PMD),y)
-LDLIBS += -lrte_pmd_bnxt
-endif
+# for shared library builds, we need to explicitly link these PMDs
+LDFLAGS_SHARED += -lrte_pmd_ixgbe -lrte_pmd_i40e -lrte_pmd_bnxt
 
-endif
+build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
+	$(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
 
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
-endif
+build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
+	$(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
 
-include $(RTE_SDK)/mk/rte.extapp.mk
+build:
+	@mkdir -p $@
 
-endif # libvirt check
+.PHONY: clean
+clean:
+	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
+	test -d build && rmdir -p build || true
Signature · 1 line
2.17.1
#116 lore raw

PATCH v3 7/37 examples/vm_power_manager: convert guest cli to pkg-config

In reply to Ciara Power

From: Bruce Richardson <[email protected]>

Convert the makefile for the vm_power_manager/guest_cli utility to build using pkg-config rather than the old build system.

---
 examples/vm_power_manager/guest_cli/Makefile | 50 ++++++++++++--------
 1 file changed, 31 insertions(+), 19 deletions(-)
examples/vm_power_manager/guest_cli/Makefile +31 -19
index 67cf081936..b84deec574 100644
@@ -1,14 +1,5 @@
 # SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
-
-include $(RTE_SDK)/mk/rte.vars.mk
+# Copyright(c) 2010-2020 Intel Corporation
 
 # binary name
 APP = guest_vm_power_mgr
@@ -16,14 +7,35 @@ APP = guest_vm_power_mgr
 # all source are stored in SRCS-y
 SRCS-y := main.c vm_power_cli_guest.c parse.c
 
-CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-
-# workaround for a gcc bug with noreturn attribute
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
-ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
-CFLAGS_main.o += -Wno-return-type
+# Build using pkg-config variables if possible
+ifneq ($(shell pkg-config --exists libdpdk && echo 0),0)
+$(error "no installation of DPDK found")
 endif
 
-include $(RTE_SDK)/mk/rte.extapp.mk
+all: shared
+.PHONY: shared static
+shared: build/$(APP)-shared
+	ln -sf $(APP)-shared build/$(APP)
+static: build/$(APP)-static
+	ln -sf $(APP)-static build/$(APP)
+
+PKGCONF ?= pkg-config
+
+PC_FILE := $(shell $(PKGCONF) --path libdpdk 2>/dev/null)
+CFLAGS += -O3 $(shell $(PKGCONF) --cflags libdpdk)
+LDFLAGS_SHARED = $(shell $(PKGCONF) --libs libdpdk)
+LDFLAGS_STATIC = $(shell $(PKGCONF) --static --libs libdpdk)
+
+build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
+	$(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
+
+build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
+	$(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
+
+build:
+	@mkdir -p $@
+
+.PHONY: clean
+clean:
+	rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
+	test -d build && rmdir -p build || true
Signature · 1 line
2.17.1
#117 lore raw

PATCH v3 8/37 examples/ethtool: convert to pkg-config-based build

In reply to Ciara Power

From: Bruce Richardson <[email protected]>

Remove references to the old DPDK build system from the makefiles, and use pkg-config provided flags instead.

---
 examples/ethtool/Makefile             | 26 +++--------
 examples/ethtool/ethtool-app/Makefile | 56 +++++++++++++++---------
 examples/ethtool/lib/Makefile         | 62 ++++++++++++++++-----------
 3 files changed, 79 insertions(+), 65 deletions(-)
examples/ethtool/Makefile +7 -19
index d3b97bb50b..a1a80c44e6 100644
@@ -1,23 +1,11 @@
 # SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2015 Intel Corporation
+# Copyright(c) 2015-2020 Intel Corporation
 
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
+subdirs := lib ethtool-app
 
-# Default target, detect a build directory, by looking for a path with a .config
-RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
+.PHONY: all static shared clean $(subdirs)
+all static shared clean: $(subdirs)
 
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linux environment, \
-please change the definition of the RTE_TARGET environment variable)
-else
-
-DIRS-y += lib ethtool-app
-endif
-
-DEPDIRS-ethtool-app := lib
-
-include $(RTE_SDK)/mk/rte.extsubdir.mk
+ethtool-app: lib
+$(subdirs):
+	$(MAKE) -C $@ $(MAKECMDGOALS)
examples/ethtool/ethtool-app/Makefile +35 -21

66 lines not on this page · raw message

examples/ethtool/lib/Makefile +37 -25

74 lines not on this page · raw message

Signature · 1 line
2.17.1
#118 lore raw

PATCH v3 9/37 build: create dummy Makefile

In reply to Ciara Power

From: Bruce Richardson <[email protected]>

This patch modifies the root Makefile to act as a dummy Makefile for when the make support is removed from DPDK in subsequent patches.

---
 Makefile | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
Makefile +5 -2
index 571277aa5a..4a9c17a9de 100644
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
+# Copyright(c) 2010-2020 Intel Corporation
 
-.error Error please compile using GNU Make (gmake)
+.PHONY: all
+all:
+	@echo "To build DPDK please use meson and ninja as described at"
+	@echo "    https://core.dpdk.org/doc/quick-start/"
Signature · 1 line
2.17.1
#119 lore raw

PATCH v3 10/37 build: remove makefiles and mk directory

In reply to Ciara Power

A decision was made [1] to no longer support Make in DPDK, this patch removes all Makefiles that do not make use of pkg-config, along with the mk directory previously used by make.

[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html

---
 GNUmakefile                                |  17 -
 MAINTAINERS                                |   4 -
 app/Makefile                               |  34 --
 app/pdump/Makefile                         |  18 -
 app/proc-info/Makefile                     |  14 -
 app/test-acl/Makefile                      |  17 -
 app/test-bbdev/Makefile                    |  30 --
 app/test-cmdline/Makefile                  |  24 -
 app/test-compress-perf/Makefile            |  19 -
 app/test-crypto-perf/Makefile              |  28 --
 app/test-eventdev/Makefile                 |  32 --
 app/test-fib/Makefile                      |  18 -
 app/test-flow-perf/Makefile                |  26 --
 app/test-pipeline/Makefile                 |  33 --
 app/test-pmd/Makefile                      |  73 ---
 app/test-regex/Makefile                    |  13 -
 app/test-sad/Makefile                      |  17 -
 app/test/Makefile                          | 310 -------------
 buildtools/Makefile                        |   9 -
 buildtools/pmdinfogen/Makefile             |  20 -
 drivers/Makefile                           |  34 --
 drivers/baseband/Makefile                  |  18 -
 drivers/baseband/fpga_5gnr_fec/Makefile    |  28 --
 drivers/baseband/fpga_lte_fec/Makefile     |  25 -
 drivers/baseband/null/Makefile             |  21 -
 drivers/baseband/turbo_sw/Makefile         |  52 ---
 drivers/bus/Makefile                       |  15 -
 drivers/bus/dpaa/Makefile                  |  48 --
 drivers/bus/fslmc/Makefile                 |  47 --
 drivers/bus/ifpga/Makefile                 |  28 --
 drivers/bus/pci/Makefile                   |  33 --
 drivers/bus/pci/bsd/Makefile               |   4 -
 drivers/bus/pci/linux/Makefile             |   6 -
 drivers/bus/vdev/Makefile                  |  27 --
 drivers/bus/vmbus/Makefile                 |  33 --
 drivers/bus/vmbus/linux/Makefile           |   3 -
 drivers/common/Makefile                    |  39 --
 drivers/common/cpt/Makefile                |  24 -
 drivers/common/dpaax/Makefile              |  30 --
 drivers/common/iavf/Makefile               |  27 --
 drivers/common/mlx5/Makefile               | 404 ----------------
 drivers/common/mvep/Makefile               |  35 --
 drivers/common/octeontx/Makefile           |  22 -
 drivers/common/octeontx2/Makefile          |  39 --
 drivers/common/qat/Makefile                |  74 ---
 drivers/compress/Makefile                  |  10 -
 drivers/compress/isal/Makefile             |  27 --
 drivers/compress/octeontx/Makefile         |  26 --
 drivers/compress/zlib/Makefile             |  25 -
 drivers/crypto/Makefile                    |  31 --
 drivers/crypto/aesni_gcm/Makefile          |  43 --
 drivers/crypto/aesni_mb/Makefile           |  42 --
 drivers/crypto/armv8/Makefile              |  36 --
 drivers/crypto/caam_jr/Makefile            |  39 --
 drivers/crypto/ccp/Makefile                |  32 --
 drivers/crypto/dpaa2_sec/Makefile          |  45 --
 drivers/crypto/dpaa_sec/Makefile           |  38 --
 drivers/crypto/kasumi/Makefile             |  42 --
 drivers/crypto/mvsam/Makefile              |  40 --
 drivers/crypto/nitrox/Makefile             |  30 --
 drivers/crypto/null/Makefile               |  27 --
 drivers/crypto/octeontx/Makefile           |  36 --
 drivers/crypto/octeontx2/Makefile          |  49 --
 drivers/crypto/openssl/Makefile            |  26 --
 drivers/crypto/scheduler/Makefile          |  34 --
 drivers/crypto/snow3g/Makefile             |  43 --
 drivers/crypto/virtio/Makefile             |  33 --
 drivers/crypto/zuc/Makefile                |  42 --
 drivers/event/Makefile                     |  20 -
 drivers/event/dpaa/Makefile                |  39 --
 drivers/event/dpaa2/Makefile               |  41 --
 drivers/event/dsw/Makefile                 |  26 --
 drivers/event/octeontx/Makefile            |  51 ---
 drivers/event/octeontx2/Makefile           |  47 --
 drivers/event/opdl/Makefile                |  29 --
 drivers/event/skeleton/Makefile            |  24 -
 drivers/event/sw/Makefile                  |  29 --
 drivers/mempool/Makefile                   |  18 -
 drivers/mempool/bucket/Makefile            |  25 -
 drivers/mempool/dpaa/Makefile              |  30 --
 drivers/mempool/dpaa2/Makefile             |  31 --
 drivers/mempool/octeontx/Makefile          |  39 --
 drivers/mempool/octeontx2/Makefile         |  40 --
 drivers/mempool/ring/Makefile              |  19 -
 drivers/mempool/stack/Makefile             |  22 -
 drivers/net/Makefile                       |  84 ----
 drivers/net/af_packet/Makefile             |  27 --
 drivers/net/af_xdp/Makefile                |  26 --
 drivers/net/ark/Makefile                   |  39 --
 drivers/net/atlantic/Makefile              |  34 --
 drivers/net/avp/Makefile                   |  29 --
 drivers/net/axgbe/Makefile                 |  33 --
 drivers/net/bnx2x/Makefile                 |  33 --
 drivers/net/bnxt/Makefile                  |  63 ---
 drivers/net/bnxt/hcapi/Makefile            |   5 -
 drivers/net/bnxt/tf_core/Makefile          |  31 --
 drivers/net/bnxt/tf_ulp/Makefile           |  20 -
 drivers/net/bonding/Makefile               |  36 --
 drivers/net/cxgbe/Makefile                 |  57 ---
 drivers/net/dpaa/Makefile                  |  41 --
 drivers/net/dpaa2/Makefile                 |  47 --
 drivers/net/e1000/Makefile                 |  79 ----
 drivers/net/ena/Makefile                   |  30 --
 drivers/net/enetc/Makefile                 |  23 -
 drivers/net/enic/Makefile                  |  68 ---
 drivers/net/failsafe/Makefile              |  43 --
 drivers/net/fm10k/Makefile                 |  77 ----
 drivers/net/hinic/Makefile                 |  67 ---
 drivers/net/hns3/Makefile                  |  42 --
 drivers/net/i40e/Makefile                  | 112 -----
 drivers/net/iavf/Makefile                  |  54 ---
 drivers/net/ice/Makefile                   |  96 ----
 drivers/net/igc/Makefile                   |  40 --
 drivers/net/ionic/Makefile                 |  31 --
 drivers/net/ipn3ke/Makefile                |  38 --
 drivers/net/ixgbe/Makefile                 | 110 -----
 drivers/net/kni/Makefile                   |  30 --
 drivers/net/liquidio/Makefile              |  30 --
 drivers/net/memif/Makefile                 |  26 --
 drivers/net/mlx4/Makefile                  | 142 ------
 drivers/net/mlx5/Makefile                  |  82 ----
 drivers/net/mvneta/Makefile                |  39 --
 drivers/net/mvpp2/Makefile                 |  42 --
 drivers/net/netvsc/Makefile                |  21 -
 drivers/net/nfb/Makefile                   |  40 --
 drivers/net/nfp/Makefile                   |  41 --
 drivers/net/null/Makefile                  |  24 -
 drivers/net/octeontx/Makefile              |  53 ---
 drivers/net/octeontx2/Makefile             |  63 ---
 drivers/net/pcap/Makefile                  |  32 --
 drivers/net/pfe/Makefile                   |  31 --
 drivers/net/qede/Makefile                  | 109 -----
 drivers/net/ring/Makefile                  |  29 --
 drivers/net/sfc/Makefile                   | 133 ------
 drivers/net/softnic/Makefile               |  54 ---
 drivers/net/szedata2/Makefile              |  30 --
 drivers/net/tap/Makefile                   |  97 ----
 drivers/net/thunderx/Makefile              |  41 --
 drivers/net/vdev_netvsc/Makefile           |  30 --
 drivers/net/vhost/Makefile                 |  31 --
 drivers/net/virtio/Makefile                |  82 ----
 drivers/net/vmxnet3/Makefile               |  53 ---
 drivers/raw/Makefile                       |  18 -
 drivers/raw/dpaa2_cmdif/Makefile           |  35 --
 drivers/raw/dpaa2_qdma/Makefile            |  36 --
 drivers/raw/ifpga/Makefile                 |  39 --
 drivers/raw/ifpga/base/Makefile            |  32 --
 drivers/raw/ioat/Makefile                  |  28 --
 drivers/raw/ntb/Makefile                   |  28 --
 drivers/raw/octeontx2_dma/Makefile         |  34 --
 drivers/raw/octeontx2_ep/Makefile          |  42 --
 drivers/raw/skeleton/Makefile              |  26 --
 drivers/regex/Makefile                     |   8 -
 drivers/regex/mlx5/Makefile                |  41 --
 drivers/vdpa/Makefile                      |  12 -
 drivers/vdpa/ifc/Makefile                  |  33 --
 drivers/vdpa/mlx5/Makefile                 |  58 ---
 examples/Makefile                          |  90 ----
 kernel/Makefile                            |   9 -
 kernel/freebsd/Makefile                    |   9 -
 kernel/freebsd/contigmem/Makefile          |  24 -
 kernel/freebsd/nic_uio/Makefile            |  24 -
 kernel/linux/Makefile                      |   9 -
 kernel/linux/igb_uio/Makefile              |  25 -
 kernel/linux/kni/Makefile                  |  34 --
 lib/Makefile                               | 138 ------
 lib/librte_acl/Makefile                    |  65 ---
 lib/librte_bbdev/Makefile                  |  25 -
 lib/librte_bitratestats/Makefile           |  20 -
 lib/librte_bpf/Makefile                    |  40 --
 lib/librte_cfgfile/Makefile                |  26 --
 lib/librte_cmdline/Makefile                |  34 --
 lib/librte_compressdev/Makefile            |  27 --
 lib/librte_cryptodev/Makefile              |  30 --
 lib/librte_distributor/Makefile            |  28 --
 lib/librte_eal/Makefile                    |  12 -
 lib/librte_eal/freebsd/Makefile            | 104 -----
 lib/librte_eal/include/Makefile            |  19 -
 lib/librte_eal/linux/Makefile              | 112 -----
 lib/librte_efd/Makefile                    |  21 -
 lib/librte_ethdev/Makefile                 |  46 --
 lib/librte_eventdev/Makefile               |  47 --
 lib/librte_fib/Makefile                    |  22 -
 lib/librte_flow_classify/Makefile          |  23 -
 lib/librte_graph/Makefile                  |  28 --
 lib/librte_gro/Makefile                    |  23 -
 lib/librte_gso/Makefile                    |  25 -
 lib/librte_hash/Makefile                   |  31 --
 lib/librte_ip_frag/Makefile                |  27 --
 lib/librte_ipsec/Makefile                  |  29 --
 lib/librte_jobstats/Makefile               |  21 -
 lib/librte_kni/Makefile                    |  20 -
 lib/librte_kvargs/Makefile                 |  21 -
 lib/librte_latencystats/Makefile           |  22 -
 lib/librte_lpm/Makefile                    |  29 --
 lib/librte_mbuf/Makefile                   |  26 --
 lib/librte_member/Makefile                 |  22 -
 lib/librte_mempool/Makefile                |  24 -
 lib/librte_meter/Makefile                  |  27 --
 lib/librte_metrics/Makefile                |  30 --
 lib/librte_net/Makefile                    |  25 -
 lib/librte_node/Makefile                   |  33 --
 lib/librte_pci/Makefile                    |  19 -
 lib/librte_pdump/Makefile                  |  20 -
 lib/librte_pipeline/Makefile               |  28 --
 lib/librte_port/Makefile                   |  59 ---
 lib/librte_power/Makefile                  |  24 -
 lib/librte_rawdev/Makefile                 |  24 -
 lib/librte_rcu/Makefile                    |  20 -
 lib/librte_regexdev/Makefile               |  32 --
 lib/librte_reorder/Makefile                |  21 -
 lib/librte_rib/Makefile                    |  22 -
 lib/librte_ring/Makefile                   |  30 --
 lib/librte_sched/Makefile                  |  29 --
 lib/librte_security/Makefile               |  24 -
 lib/librte_stack/Makefile                  |  27 --
 lib/librte_table/Makefile                  |  59 ---
 lib/librte_telemetry/Makefile              |  30 --
 lib/librte_timer/Makefile                  |  20 -
 lib/librte_vhost/Makefile                  |  54 ---
 mk/arch/arm/rte.vars.mk                    |  16 -
 mk/arch/arm64/rte.vars.mk                  |  37 --
 mk/arch/i686/rte.vars.mk                   |  36 --
 mk/arch/ppc_64/rte.vars.mk                 |  17 -
 mk/arch/x86_64/rte.vars.mk                 |  36 --
 mk/arch/x86_x32/rte.vars.mk                |  40 --
 mk/exec-env/bsdapp                         |   1 -
 mk/exec-env/freebsd/rte.app.mk             |   8 -
 mk/exec-env/freebsd/rte.vars.mk            |  36 --
 mk/exec-env/linux/rte.app.mk               |   8 -
 mk/exec-env/linux/rte.vars.mk              |  44 --
 mk/exec-env/linuxapp                       |   1 -
 mk/internal/rte.build-post.mk              |  34 --
 mk/internal/rte.build-pre.mk               |   7 -
 mk/internal/rte.clean-post.mk              |  34 --
 mk/internal/rte.clean-pre.mk               |   4 -
 mk/internal/rte.compile-post.mk            |   5 -
 mk/internal/rte.compile-pre.mk             | 164 -------
 mk/internal/rte.extvars.mk                 |  55 ---
 mk/internal/rte.install-post.mk            |  71 ---
 mk/internal/rte.install-pre.mk             |  32 --
 mk/machine/armv7a/rte.vars.mk              |  36 --
 mk/machine/armv8a/rte.vars.mk              |  31 --
 mk/machine/default/rte.vars.mk             |  30 --
 mk/machine/dpaa/rte.vars.mk                |  37 --
 mk/machine/emag/rte.vars.mk                |  32 --
 mk/machine/hsw/rte.vars.mk                 |  30 --
 mk/machine/ivb/rte.vars.mk                 |  30 --
 mk/machine/n1sdp/rte.vars.mk               |  34 --
 mk/machine/native/rte.vars.mk              |  39 --
 mk/machine/nhm/rte.vars.mk                 |  30 --
 mk/machine/octeontx2/rte.vars.mk           |  34 --
 mk/machine/power8/rte.vars.mk              |  30 --
 mk/machine/silvermont/rte.vars.mk          |  30 --
 mk/machine/snb/rte.vars.mk                 |  30 --
 mk/machine/thunderx/rte.vars.mk            |  31 --
 mk/machine/thunderx2/rte.vars.mk           |  34 --
 mk/machine/wsm/rte.vars.mk                 |  30 --
 mk/machine/xgene1/rte.vars.mk              |  31 --
 mk/rte.app.mk                              | 509 ---------------------
 mk/rte.bsdmodule.mk                        |  89 ----
 mk/rte.combinedlib.mk                      |  30 --
 mk/rte.cpuflags.mk                         | 124 -----
 mk/rte.extapp.mk                           |  24 -
 mk/rte.extlib.mk                           |  26 --
 mk/rte.extobj.mk                           |  24 -
 mk/rte.extshared.mk                        |  26 --
 mk/rte.extsubdir.mk                        |  39 --
 mk/rte.gnuconfigure.mk                     |  44 --
 mk/rte.helper.mk                           |  10 -
 mk/rte.hostapp.mk                          |  93 ----
 mk/rte.hostlib.mk                          |  86 ----
 mk/rte.install.mk                          |  28 --
 mk/rte.lib.mk                              | 156 -------
 mk/rte.module.mk                           |  86 ----
 mk/rte.obj.mk                              |  82 ----
 mk/rte.sdkbuild.mk                         |  77 ----
 mk/rte.sdkconfig.mk                        | 142 ------
 mk/rte.sdkdepdirs.mk                       |   9 -
 mk/rte.sdkdoc.mk                           | 104 -----
 mk/rte.sdkexamples.mk                      |  50 --
 mk/rte.sdkgcov.mk                          |  39 --
 mk/rte.sdkinstall.mk                       | 152 ------
 mk/rte.sdkroot.mk                          | 115 -----
 mk/rte.sdktest.mk                          |  76 ---
 mk/rte.shared.mk                           | 108 -----
 mk/rte.subdir.mk                           |  65 ---
 mk/rte.vars.mk                             | 102 -----
 mk/target/generic/rte.app.mk               |  13 -
 mk/target/generic/rte.vars.mk              | 132 ------
 mk/toolchain/clang/rte.toolchain-compat.mk |  22 -
 mk/toolchain/clang/rte.vars.mk             |  60 ---
 mk/toolchain/gcc/rte.toolchain-compat.mk   | 120 -----
 mk/toolchain/gcc/rte.vars.mk               | 109 -----
 mk/toolchain/icc/rte.toolchain-compat.mk   |  58 ---
 mk/toolchain/icc/rte.vars.mk               |  62 ---
 296 files changed, 12992 deletions(-)
 delete mode 100644 GNUmakefile
 delete mode 100644 app/Makefile
 delete mode 100644 app/pdump/Makefile
 delete mode 100644 app/proc-info/Makefile
 delete mode 100644 app/test-acl/Makefile
 delete mode 100644 app/test-bbdev/Makefile
 delete mode 100644 app/test-cmdline/Makefile
 delete mode 100644 app/test-compress-perf/Makefile
 delete mode 100644 app/test-crypto-perf/Makefile
 delete mode 100644 app/test-eventdev/Makefile
 delete mode 100644 app/test-fib/Makefile
 delete mode 100644 app/test-flow-perf/Makefile
 delete mode 100644 app/test-pipeline/Makefile
 delete mode 100644 app/test-pmd/Makefile
 delete mode 100644 app/test-regex/Makefile
 delete mode 100644 app/test-sad/Makefile
 delete mode 100644 app/test/Makefile
 delete mode 100644 buildtools/Makefile
 delete mode 100644 buildtools/pmdinfogen/Makefile
 delete mode 100644 drivers/Makefile
 delete mode 100644 drivers/baseband/Makefile
 delete mode 100644 drivers/baseband/fpga_5gnr_fec/Makefile
 delete mode 100644 drivers/baseband/fpga_lte_fec/Makefile
 delete mode 100644 drivers/baseband/null/Makefile
 delete mode 100644 drivers/baseband/turbo_sw/Makefile
 delete mode 100644 drivers/bus/Makefile
 delete mode 100644 drivers/bus/dpaa/Makefile
 delete mode 100644 drivers/bus/fslmc/Makefile
 delete mode 100644 drivers/bus/ifpga/Makefile
 delete mode 100644 drivers/bus/pci/Makefile
 delete mode 100644 drivers/bus/pci/bsd/Makefile
 delete mode 100644 drivers/bus/pci/linux/Makefile
 delete mode 100644 drivers/bus/vdev/Makefile
 delete mode 100644 drivers/bus/vmbus/Makefile
 delete mode 100644 drivers/bus/vmbus/linux/Makefile
 delete mode 100644 drivers/common/Makefile
 delete mode 100644 drivers/common/cpt/Makefile
 delete mode 100644 drivers/common/dpaax/Makefile
 delete mode 100644 drivers/common/iavf/Makefile
 delete mode 100644 drivers/common/mlx5/Makefile
 delete mode 100644 drivers/common/mvep/Makefile
 delete mode 100644 drivers/common/octeontx/Makefile
 delete mode 100644 drivers/common/octeontx2/Makefile
 delete mode 100644 drivers/common/qat/Makefile
 delete mode 100644 drivers/compress/Makefile
 delete mode 100644 drivers/compress/isal/Makefile
 delete mode 100644 drivers/compress/octeontx/Makefile
 delete mode 100644 drivers/compress/zlib/Makefile
 delete mode 100644 drivers/crypto/Makefile
 delete mode 100644 drivers/crypto/aesni_gcm/Makefile
 delete mode 100644 drivers/crypto/aesni_mb/Makefile
 delete mode 100644 drivers/crypto/armv8/Makefile
 delete mode 100644 drivers/crypto/caam_jr/Makefile
 delete mode 100644 drivers/crypto/ccp/Makefile
 delete mode 100644 drivers/crypto/dpaa2_sec/Makefile
 delete mode 100644 drivers/crypto/dpaa_sec/Makefile
 delete mode 100644 drivers/crypto/kasumi/Makefile
 delete mode 100644 drivers/crypto/mvsam/Makefile
 delete mode 100644 drivers/crypto/nitrox/Makefile
 delete mode 100644 drivers/crypto/null/Makefile
 delete mode 100644 drivers/crypto/octeontx/Makefile
 delete mode 100644 drivers/crypto/octeontx2/Makefile
 delete mode 100644 drivers/crypto/openssl/Makefile
 delete mode 100644 drivers/crypto/scheduler/Makefile
 delete mode 100644 drivers/crypto/snow3g/Makefile
 delete mode 100644 drivers/crypto/virtio/Makefile
 delete mode 100644 drivers/crypto/zuc/Makefile
 delete mode 100644 drivers/event/Makefile
 delete mode 100644 drivers/event/dpaa/Makefile
 delete mode 100644 drivers/event/dpaa2/Makefile
 delete mode 100644 drivers/event/dsw/Makefile
 delete mode 100644 drivers/event/octeontx/Makefile
 delete mode 100644 drivers/event/octeontx2/Makefile
 delete mode 100644 drivers/event/opdl/Makefile
 delete mode 100644 drivers/event/skeleton/Makefile
 delete mode 100644 drivers/event/sw/Makefile
 delete mode 100644 drivers/mempool/Makefile
 delete mode 100644 drivers/mempool/bucket/Makefile
 delete mode 100644 drivers/mempool/dpaa/Makefile
 delete mode 100644 drivers/mempool/dpaa2/Makefile
 delete mode 100644 drivers/mempool/octeontx/Makefile
 delete mode 100644 drivers/mempool/octeontx2/Makefile
 delete mode 100644 drivers/mempool/ring/Makefile
 delete mode 100644 drivers/mempool/stack/Makefile
 delete mode 100644 drivers/net/Makefile
 delete mode 100644 drivers/net/af_packet/Makefile
 delete mode 100644 drivers/net/af_xdp/Makefile
 delete mode 100644 drivers/net/ark/Makefile
 delete mode 100644 drivers/net/atlantic/Makefile
 delete mode 100644 drivers/net/avp/Makefile
 delete mode 100644 drivers/net/axgbe/Makefile
 delete mode 100644 drivers/net/bnx2x/Makefile
 delete mode 100644 drivers/net/bnxt/Makefile
 delete mode 100644 drivers/net/bnxt/hcapi/Makefile
 delete mode 100644 drivers/net/bnxt/tf_core/Makefile
 delete mode 100644 drivers/net/bnxt/tf_ulp/Makefile
 delete mode 100644 drivers/net/bonding/Makefile
 delete mode 100644 drivers/net/cxgbe/Makefile
 delete mode 100644 drivers/net/dpaa/Makefile
 delete mode 100644 drivers/net/dpaa2/Makefile
 delete mode 100644 drivers/net/e1000/Makefile
 delete mode 100644 drivers/net/ena/Makefile
 delete mode 100644 drivers/net/enetc/Makefile
 delete mode 100644 drivers/net/enic/Makefile
 delete mode 100644 drivers/net/failsafe/Makefile
 delete mode 100644 drivers/net/fm10k/Makefile
 delete mode 100644 drivers/net/hinic/Makefile
 delete mode 100644 drivers/net/hns3/Makefile
 delete mode 100644 drivers/net/i40e/Makefile
 delete mode 100644 drivers/net/iavf/Makefile
 delete mode 100644 drivers/net/ice/Makefile
 delete mode 100644 drivers/net/igc/Makefile
 delete mode 100644 drivers/net/ionic/Makefile
 delete mode 100644 drivers/net/ipn3ke/Makefile
 delete mode 100644 drivers/net/ixgbe/Makefile
 delete mode 100644 drivers/net/kni/Makefile
 delete mode 100644 drivers/net/liquidio/Makefile
 delete mode 100644 drivers/net/memif/Makefile
 delete mode 100644 drivers/net/mlx4/Makefile
 delete mode 100644 drivers/net/mlx5/Makefile
 delete mode 100644 drivers/net/mvneta/Makefile
 delete mode 100644 drivers/net/mvpp2/Makefile
 delete mode 100644 drivers/net/netvsc/Makefile
 delete mode 100644 drivers/net/nfb/Makefile
 delete mode 100644 drivers/net/nfp/Makefile
 delete mode 100644 drivers/net/null/Makefile
 delete mode 100644 drivers/net/octeontx/Makefile
 delete mode 100644 drivers/net/octeontx2/Makefile
 delete mode 100644 drivers/net/pcap/Makefile
 delete mode 100644 drivers/net/pfe/Makefile
 delete mode 100644 drivers/net/qede/Makefile
 delete mode 100644 drivers/net/ring/Makefile
 delete mode 100644 drivers/net/sfc/Makefile
 delete mode 100644 drivers/net/softnic/Makefile
 delete mode 100644 drivers/net/szedata2/Makefile
 delete mode 100644 drivers/net/tap/Makefile
 delete mode 100644 drivers/net/thunderx/Makefile
 delete mode 100644 drivers/net/vdev_netvsc/Makefile
 delete mode 100644 drivers/net/vhost/Makefile
 delete mode 100644 drivers/net/virtio/Makefile
 delete mode 100644 drivers/net/vmxnet3/Makefile
 delete mode 100644 drivers/raw/Makefile
 delete mode 100644 drivers/raw/dpaa2_cmdif/Makefile
 delete mode 100644 drivers/raw/dpaa2_qdma/Makefile
 delete mode 100644 drivers/raw/ifpga/Makefile
 delete mode 100644 drivers/raw/ifpga/base/Makefile
 delete mode 100644 drivers/raw/ioat/Makefile
 delete mode 100644 drivers/raw/ntb/Makefile
 delete mode 100644 drivers/raw/octeontx2_dma/Makefile
 delete mode 100644 drivers/raw/octeontx2_ep/Makefile
 delete mode 100644 drivers/raw/skeleton/Makefile
 delete mode 100644 drivers/regex/Makefile
 delete mode 100644 drivers/regex/mlx5/Makefile
 delete mode 100644 drivers/vdpa/Makefile
 delete mode 100644 drivers/vdpa/ifc/Makefile
 delete mode 100644 drivers/vdpa/mlx5/Makefile
 delete mode 100644 examples/Makefile
 delete mode 100644 kernel/Makefile
 delete mode 100644 kernel/freebsd/Makefile
 delete mode 100644 kernel/freebsd/contigmem/Makefile
 delete mode 100644 kernel/freebsd/nic_uio/Makefile
 delete mode 100644 kernel/linux/Makefile
 delete mode 100644 kernel/linux/igb_uio/Makefile
 delete mode 100644 kernel/linux/kni/Makefile
 delete mode 100644 lib/Makefile
 delete mode 100644 lib/librte_acl/Makefile
 delete mode 100644 lib/librte_bbdev/Makefile
 delete mode 100644 lib/librte_bitratestats/Makefile
 delete mode 100644 lib/librte_bpf/Makefile
 delete mode 100644 lib/librte_cfgfile/Makefile
 delete mode 100644 lib/librte_cmdline/Makefile
 delete mode 100644 lib/librte_compressdev/Makefile
 delete mode 100644 lib/librte_cryptodev/Makefile
 delete mode 100644 lib/librte_distributor/Makefile
 delete mode 100644 lib/librte_eal/Makefile
 delete mode 100644 lib/librte_eal/freebsd/Makefile
 delete mode 100644 lib/librte_eal/include/Makefile
 delete mode 100644 lib/librte_eal/linux/Makefile
 delete mode 100644 lib/librte_efd/Makefile
 delete mode 100644 lib/librte_ethdev/Makefile
 delete mode 100644 lib/librte_eventdev/Makefile
 delete mode 100644 lib/librte_fib/Makefile
 delete mode 100644 lib/librte_flow_classify/Makefile
 delete mode 100644 lib/librte_graph/Makefile
 delete mode 100644 lib/librte_gro/Makefile
 delete mode 100644 lib/librte_gso/Makefile
 delete mode 100644 lib/librte_hash/Makefile
 delete mode 100644 lib/librte_ip_frag/Makefile
 delete mode 100644 lib/librte_ipsec/Makefile
 delete mode 100644 lib/librte_jobstats/Makefile
 delete mode 100644 lib/librte_kni/Makefile
 delete mode 100644 lib/librte_kvargs/Makefile
 delete mode 100644 lib/librte_latencystats/Makefile
 delete mode 100644 lib/librte_lpm/Makefile
 delete mode 100644 lib/librte_mbuf/Makefile
 delete mode 100644 lib/librte_member/Makefile
 delete mode 100644 lib/librte_mempool/Makefile
 delete mode 100644 lib/librte_meter/Makefile
 delete mode 100644 lib/librte_metrics/Makefile
 delete mode 100644 lib/librte_net/Makefile
 delete mode 100644 lib/librte_node/Makefile
 delete mode 100644 lib/librte_pci/Makefile
 delete mode 100644 lib/librte_pdump/Makefile
 delete mode 100644 lib/librte_pipeline/Makefile
 delete mode 100644 lib/librte_port/Makefile
 delete mode 100644 lib/librte_power/Makefile
 delete mode 100644 lib/librte_rawdev/Makefile
 delete mode 100644 lib/librte_rcu/Makefile
 delete mode 100644 lib/librte_regexdev/Makefile
 delete mode 100644 lib/librte_reorder/Makefile
 delete mode 100644 lib/librte_rib/Makefile
 delete mode 100644 lib/librte_ring/Makefile
 delete mode 100644 lib/librte_sched/Makefile
 delete mode 100644 lib/librte_security/Makefile
 delete mode 100644 lib/librte_stack/Makefile
 delete mode 100644 lib/librte_table/Makefile
 delete mode 100644 lib/librte_telemetry/Makefile
 delete mode 100644 lib/librte_timer/Makefile
 delete mode 100644 lib/librte_vhost/Makefile
 delete mode 100644 mk/arch/arm/rte.vars.mk
 delete mode 100644 mk/arch/arm64/rte.vars.mk
 delete mode 100644 mk/arch/i686/rte.vars.mk
 delete mode 100644 mk/arch/ppc_64/rte.vars.mk
 delete mode 100644 mk/arch/x86_64/rte.vars.mk
 delete mode 100644 mk/arch/x86_x32/rte.vars.mk
 delete mode 120000 mk/exec-env/bsdapp
 delete mode 100644 mk/exec-env/freebsd/rte.app.mk
 delete mode 100644 mk/exec-env/freebsd/rte.vars.mk
 delete mode 100644 mk/exec-env/linux/rte.app.mk
 delete mode 100644 mk/exec-env/linux/rte.vars.mk
 delete mode 120000 mk/exec-env/linuxapp
 delete mode 100644 mk/internal/rte.build-post.mk
 delete mode 100644 mk/internal/rte.build-pre.mk
 delete mode 100644 mk/internal/rte.clean-post.mk
 delete mode 100644 mk/internal/rte.clean-pre.mk
 delete mode 100644 mk/internal/rte.compile-post.mk
 delete mode 100644 mk/internal/rte.compile-pre.mk
 delete mode 100644 mk/internal/rte.extvars.mk
 delete mode 100644 mk/internal/rte.install-post.mk
 delete mode 100644 mk/internal/rte.install-pre.mk
 delete mode 100644 mk/machine/armv7a/rte.vars.mk
 delete mode 100644 mk/machine/armv8a/rte.vars.mk
 delete mode 100644 mk/machine/default/rte.vars.mk
 delete mode 100644 mk/machine/dpaa/rte.vars.mk
 delete mode 100644 mk/machine/emag/rte.vars.mk
 delete mode 100644 mk/machine/hsw/rte.vars.mk
 delete mode 100644 mk/machine/ivb/rte.vars.mk
 delete mode 100644 mk/machine/n1sdp/rte.vars.mk
 delete mode 100644 mk/machine/native/rte.vars.mk
 delete mode 100644 mk/machine/nhm/rte.vars.mk
 delete mode 100644 mk/machine/octeontx2/rte.vars.mk
 delete mode 100644 mk/machine/power8/rte.vars.mk
 delete mode 100644 mk/machine/silvermont/rte.vars.mk
 delete mode 100644 mk/machine/snb/rte.vars.mk
 delete mode 100644 mk/machine/thunderx/rte.vars.mk
 delete mode 100644 mk/machine/thunderx2/rte.vars.mk
 delete mode 100644 mk/machine/wsm/rte.vars.mk
 delete mode 100644 mk/machine/xgene1/rte.vars.mk
 delete mode 100644 mk/rte.app.mk
 delete mode 100644 mk/rte.bsdmodule.mk
 delete mode 100644 mk/rte.combinedlib.mk
 delete mode 100644 mk/rte.cpuflags.mk
 delete mode 100644 mk/rte.extapp.mk
 delete mode 100644 mk/rte.extlib.mk
 delete mode 100644 mk/rte.extobj.mk
 delete mode 100644 mk/rte.extshared.mk
 delete mode 100644 mk/rte.extsubdir.mk
 delete mode 100644 mk/rte.gnuconfigure.mk
 delete mode 100644 mk/rte.helper.mk
 delete mode 100644 mk/rte.hostapp.mk
 delete mode 100644 mk/rte.hostlib.mk
 delete mode 100644 mk/rte.install.mk
 delete mode 100644 mk/rte.lib.mk
 delete mode 100644 mk/rte.module.mk
 delete mode 100644 mk/rte.obj.mk
 delete mode 100644 mk/rte.sdkbuild.mk
 delete mode 100644 mk/rte.sdkconfig.mk
 delete mode 100644 mk/rte.sdkdepdirs.mk
 delete mode 100644 mk/rte.sdkdoc.mk
 delete mode 100644 mk/rte.sdkexamples.mk
 delete mode 100644 mk/rte.sdkgcov.mk
 delete mode 100644 mk/rte.sdkinstall.mk
 delete mode 100644 mk/rte.sdkroot.mk
 delete mode 100644 mk/rte.sdktest.mk
 delete mode 100644 mk/rte.shared.mk
 delete mode 100644 mk/rte.subdir.mk
 delete mode 100644 mk/rte.vars.mk
 delete mode 100644 mk/target/generic/rte.app.mk
 delete mode 100644 mk/target/generic/rte.vars.mk
 delete mode 100644 mk/toolchain/clang/rte.toolchain-compat.mk
 delete mode 100644 mk/toolchain/clang/rte.vars.mk
 delete mode 100644 mk/toolchain/gcc/rte.toolchain-compat.mk
 delete mode 100644 mk/toolchain/gcc/rte.vars.mk
 delete mode 100644 mk/toolchain/icc/rte.toolchain-compat.mk
 delete mode 100644 mk/toolchain/icc/rte.vars.mk
GNUmakefile deleted +0 -17
deleted file mode 100644
index e8de422df8..0000000000
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2015 Intel Corporation
-
-#
-# Head Makefile for compiling rte SDK
-#
-
-RTE_SDK := $(CURDIR)
-export RTE_SDK
-
-#
-# directory list
-#
-
-ROOTDIRS-y := buildtools lib kernel drivers app
-
-include $(RTE_SDK)/mk/rte.sdkroot.mk
MAINTAINERS +0 -4
index ed163f5d59..ccaecabea0 100644
@@ -100,10 +100,8 @@ F: .editorconfig
 Build System
 ------------
 M: Thomas Monjalon <[email protected]>
-F: GNUmakefile
 F: Makefile
 F: config/
-F: mk/
 F: buildtools/auto-config-h.sh
 F: buildtools/gen-build-mk.sh
 F: buildtools/gen-config-h.sh
@@ -354,7 +352,6 @@ Memory pool
 M: Olivier Matz <[email protected]>
 M: Andrew Rybchenko <[email protected]>
 F: lib/librte_mempool/
-F: drivers/mempool/Makefile
 F: drivers/mempool/ring/
 F: doc/guides/prog_guide/mempool_lib.rst
 F: app/test/test_mempool*
@@ -1519,7 +1516,6 @@ Test Applications
 -----------------
 
 Unit tests framework
-F: app/test/Makefile
 F: app/test/autotest*
 F: app/test/commands.c
 F: app/test/get-coremask.sh
app/Makefile deleted +0 -34
deleted file mode 100644
index 453c4fed6d..0000000000
@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-$(CONFIG_RTE_APP_TEST) += test
-DIRS-$(CONFIG_RTE_TEST_PMD) += test-pmd
-DIRS-$(CONFIG_RTE_PROC_INFO) += proc-info
-DIRS-$(CONFIG_RTE_LIBRTE_PDUMP) += pdump
-DIRS-$(CONFIG_RTE_LIBRTE_ACL) += test-acl
-DIRS-$(CONFIG_RTE_LIBRTE_CMDLINE) += test-cmdline
-DIRS-$(CONFIG_RTE_LIBRTE_FIB) += test-fib
-DIRS-$(CONFIG_RTE_TEST_FLOW_PERF) += test-flow-perf
-DIRS-$(CONFIG_RTE_LIBRTE_PIPELINE) += test-pipeline
-DIRS-$(CONFIG_RTE_LIBRTE_IPSEC) += test-sad
-DIRS-$(CONFIG_RTE_LIBRTE_REGEXDEV) += test-regex
-
-ifeq ($(CONFIG_RTE_LIBRTE_BBDEV),y)
-DIRS-$(CONFIG_RTE_TEST_BBDEV) += test-bbdev
-endif
-
-ifeq ($(CONFIG_RTE_LIBRTE_COMPRESSDEV),y)
-DIRS-$(CONFIG_RTE_APP_COMPRESS_PERF) += test-compress-perf
-endif
-
-ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y)
-DIRS-$(CONFIG_RTE_APP_CRYPTO_PERF) += test-crypto-perf
-endif
-
-ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
-DIRS-$(CONFIG_RTE_APP_EVENTDEV) += test-eventdev
-endif
-
-include $(RTE_SDK)/mk/rte.subdir.mk
app/pdump/Makefile deleted +0 -18
deleted file mode 100644
index e6b9eea91b..0000000000
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifeq ($(CONFIG_RTE_LIBRTE_PDUMP),y)
-
-APP = dpdk-pdump
-
-CFLAGS += $(WERROR_FLAGS)
-
-# all source are stored in SRCS-y
-
-SRCS-y := main.c
-
-include $(RTE_SDK)/mk/rte.app.mk
-
-endif
app/proc-info/Makefile deleted +0 -14
deleted file mode 100644
index 214f3f54a1..0000000000
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2015 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-APP = dpdk-procinfo
-
-CFLAGS += $(WERROR_FLAGS)
-
-# all source are stored in SRCS-y
-
-SRCS-y := main.c
-
-include $(RTE_SDK)/mk/rte.app.mk
app/test-acl/Makefile deleted +0 -17
deleted file mode 100644
index 5f26294cf1..0000000000
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifeq ($(CONFIG_RTE_LIBRTE_ACL),y)
-
-APP = testacl
-
-CFLAGS += $(WERROR_FLAGS)
-
-# all source are stored in SRCS-y
-SRCS-y := main.c
-
-include $(RTE_SDK)/mk/rte.app.mk
-
-endif
app/test-bbdev/Makefile deleted +0 -30
deleted file mode 100644
index dc29557f37..0000000000
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-APP = testbbdev
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-#
-# all sources are stored in SRCS-y
-#
-SRCS-$(CONFIG_RTE_TEST_BBDEV) += main.c
-SRCS-$(CONFIG_RTE_TEST_BBDEV) += test_bbdev.c
-SRCS-$(CONFIG_RTE_TEST_BBDEV) += test_bbdev_perf.c
-SRCS-$(CONFIG_RTE_TEST_BBDEV) += test_bbdev_vector.c
-
-LDLIBS += -lm
-ifeq ($(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC),y)
-LDLIBS += -lrte_pmd_bbdev_fpga_lte_fec
-endif
-ifeq ($(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC),y)
-LDLIBS += -lrte_pmd_bbdev_fpga_5gnr_fec
-endif
-
-include $(RTE_SDK)/mk/rte.app.mk
app/test-cmdline/Makefile deleted +0 -24
deleted file mode 100644
index 3e7421906b..0000000000
@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifeq ($(CONFIG_RTE_LIBRTE_CMDLINE),y)
-
-#
-# library name
-#
-APP = cmdline_test
-
-#
-# all sources are stored in SRCS-y
-#
-SRCS-y += cmdline_test.c
-SRCS-y += commands.c
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-include $(RTE_SDK)/mk/rte.app.mk
-
-endif
app/test-compress-perf/Makefile deleted +0 -19
deleted file mode 100644
index 2bff531836..0000000000
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-APP = dpdk-test-compress-perf
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -O3
-
-# all source are stored in SRCS-y
-SRCS-y := main.c
-SRCS-y += comp_perf_options_parse.c
-SRCS-y += comp_perf_test_verify.c
-SRCS-y += comp_perf_test_throughput.c
-SRCS-y += comp_perf_test_cyclecount.c
-SRCS-y += comp_perf_test_common.c
-
-include $(RTE_SDK)/mk/rte.app.mk
app/test-crypto-perf/Makefile deleted +0 -28
deleted file mode 100644
index 0dced790f0..0000000000
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016-2017 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-
-APP = dpdk-test-crypto-perf
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -O3
-
-# all source are stored in SRCS-y
-SRCS-y := main.c
-SRCS-y += cperf_ops.c
-SRCS-y += cperf_options_parsing.c
-SRCS-y += cperf_test_vectors.c
-SRCS-y += cperf_test_throughput.c
-SRCS-y += cperf_test_latency.c
-SRCS-y += cperf_test_pmd_cyclecount.c
-SRCS-y += cperf_test_verify.c
-SRCS-y += cperf_test_vector_parsing.c
-SRCS-y += cperf_test_common.c
-
-ifeq ($(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER),y)
-LDLIBS += -lrte_pmd_crypto_scheduler
-endif
-
-include $(RTE_SDK)/mk/rte.app.mk
app/test-eventdev/Makefile deleted +0 -32
deleted file mode 100644
index e600e21c41..0000000000
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Cavium, Inc
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-APP = dpdk-test-eventdev
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-y := evt_main.c
-SRCS-y += evt_options.c
-SRCS-y += evt_test.c
-SRCS-y += parser.c
-
-SRCS-y += test_order_common.c
-SRCS-y += test_order_queue.c
-SRCS-y += test_order_atq.c
-
-SRCS-y += test_perf_common.c
-SRCS-y += test_perf_queue.c
-SRCS-y += test_perf_atq.c
-
-SRCS-y += test_pipeline_common.c
-SRCS-y += test_pipeline_queue.c
-SRCS-y += test_pipeline_atq.c
-
-include $(RTE_SDK)/mk/rte.app.mk
app/test-fib/Makefile deleted +0 -18
deleted file mode 100644
index 2ea799c0e9..0000000000
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifeq ($(CONFIG_RTE_LIBRTE_FIB),y)
-
-APP = testfib
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-# all source are stored in SRCS-y
-SRCS-y := main.c
-
-include $(RTE_SDK)/mk/rte.app.mk
-
-endif
app/test-flow-perf/Makefile deleted +0 -26
deleted file mode 100644
index 4f2db75910..0000000000
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2020 Mellanox Technologies, Ltd
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifeq ($(CONFIG_RTE_TEST_FLOW_PERF),y)
-
-#
-# library name
-#
-APP = dpdk-test-flow-perf
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-y += actions_gen.c
-SRCS-y += flow_gen.c
-SRCS-y += items_gen.c
-SRCS-y += main.c
-
-include $(RTE_SDK)/mk/rte.app.mk
-
-endif
app/test-pipeline/Makefile deleted +0 -33
deleted file mode 100644
index fc3a504409..0000000000
@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2015 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifeq ($(CONFIG_RTE_LIBRTE_PIPELINE),y)
-
-#
-# library name
-#
-APP = testpipeline
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-y := main.c
-SRCS-y += config.c
-SRCS-y += init.c
-SRCS-y += runtime.c
-SRCS-y += pipeline_stub.c
-SRCS-y += pipeline_hash.c
-SRCS-y += pipeline_lpm.c
-SRCS-y += pipeline_lpm_ipv6.c
-
-# include ACL lib if available
-SRCS-$(CONFIG_RTE_LIBRTE_ACL) += pipeline_acl.c
-
-include $(RTE_SDK)/mk/rte.app.mk
-
-endif
app/test-pmd/Makefile deleted +0 -73

73 lines not on this page · raw message

app/test-regex/Makefile deleted +0 -13
deleted file mode 100644
index bb8f150871..0000000000
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2020 Mellanox Technologies, Ltd
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-APP = dpdk-test-regex
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-SRCS-y := main.c
-
-include $(RTE_SDK)/mk/rte.app.mk
app/test-sad/Makefile deleted +0 -17
deleted file mode 100644
index 9b5a7ddc61..0000000000
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifeq ($(CONFIG_RTE_LIBRTE_IPSEC),y)
-
-APP = testsad
-
-CFLAGS += $(WERROR_FLAGS)
-
-# all source are stored in SRCS-y
-SRCS-y := main.c
-
-include $(RTE_SDK)/mk/rte.app.mk
-
-endif
app/test/Makefile deleted +0 -310

310 lines not on this page · raw message

buildtools/Makefile deleted +0 -9
deleted file mode 100644
index 7f76fd7d65..0000000000
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016 Neil Horman <[email protected]>
-# All rights reserved.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-y += pmdinfogen
-
-include $(RTE_SDK)/mk/rte.subdir.mk
buildtools/pmdinfogen/Makefile deleted +0 -20
deleted file mode 100644
index a97a7648fe..0000000000
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016 Neil Horman <[email protected]>
-# All rights reserved.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-HOSTAPP = dpdk-pmdinfogen
-
-#
-# all sources are stored in SRCS-y
-#
-SRCS-y += pmdinfogen.c
-
-HOST_CFLAGS += $(HOST_WERROR_FLAGS) -g
-HOST_CFLAGS += -I$(RTE_OUTPUT)/include
-
-include $(RTE_SDK)/mk/rte.hostapp.mk
drivers/Makefile deleted +0 -34
deleted file mode 100644
index 7f06162dc4..0000000000
@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2015 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-y += common
-DIRS-y += bus
-DEPDIRS-bus := common
-DIRS-y += mempool
-DEPDIRS-mempool := common bus
-ifeq ($(findstring y,$(CONFIG_RTE_LIBRTE_MLX5_PMD)$(CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD)$(CONFIG_RTE_LIBRTE_MLX5_REGEX_PMD)),y)
-DIRS-y += common/mlx5
-DEPDIRS-common/mlx5 := bus
-endif
-DIRS-y += net
-DEPDIRS-net := common bus mempool common/mlx5
-DIRS-$(CONFIG_RTE_LIBRTE_BBDEV) += baseband
-DEPDIRS-baseband := common bus mempool
-DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += crypto
-DEPDIRS-crypto := common bus mempool
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += common/qat
-DEPDIRS-common/qat := bus mempool
-DIRS-$(CONFIG_RTE_LIBRTE_COMPRESSDEV) += compress
-DEPDIRS-compress := bus mempool
-DIRS-$(CONFIG_RTE_LIBRTE_REGEXDEV) += regex
-DEPDIRS-regex := common bus common/mlx5
-DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += vdpa
-DEPDIRS-vdpa := common bus mempool common/mlx5
-DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += event
-DEPDIRS-event := common bus mempool net crypto
-DIRS-$(CONFIG_RTE_LIBRTE_RAWDEV) += raw
-DEPDIRS-raw := common bus mempool net event
-
-include $(RTE_SDK)/mk/rte.subdir.mk
drivers/baseband/Makefile deleted +0 -18
deleted file mode 100644
index dcc0969175..0000000000
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-core-libs := librte_eal librte_mbuf librte_mempool librte_ring
-core-libs += librte_bbdev librte_kvargs librte_cfgfile
-
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL) += null
-DEPDIRS-null = $(core-libs)
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += turbo_sw
-DEPDIRS-turbo_sw = $(core-libs)
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC) += fpga_lte_fec
-DEPDIRS-fpga_lte_fec = $(core-libs)
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC) += fpga_5gnr_fec
-DEPDIRS-fpga_5gnr_fec = $(core-libs)
-
-include $(RTE_SDK)/mk/rte.subdir.mk
drivers/baseband/fpga_5gnr_fec/Makefile deleted +0 -28
deleted file mode 100644
index 7b7017c6dc..0000000000
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_bbdev_fpga_5gnr_fec.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_bbdev
-LDLIBS += -lrte_pci -lrte_bus_pci
-
-# versioning export map
-EXPORT_MAP := rte_pmd_bbdev_fpga_5gnr_fec_version.map
-
-# library version
-LIBABIVER := 1
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC) += rte_fpga_5gnr_fec.c
-
-# export include files
-SYMLINK-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC)-include += rte_pmd_fpga_5gnr_fec.h
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/baseband/fpga_lte_fec/Makefile deleted +0 -25
deleted file mode 100644
index 30caafe3db..0000000000
@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_bbdev_fpga_lte_fec.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_bbdev
-LDLIBS += -lrte_pci -lrte_bus_pci
-
-# versioning export map
-EXPORT_MAP := rte_pmd_bbdev_fpga_lte_fec_version.map
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC) += fpga_lte_fec.c
-
-# export include files
-SYMLINK-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC)-include += fpga_lte_fec.h
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/baseband/null/Makefile deleted +0 -21
deleted file mode 100644
index 0ee500166d..0000000000
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-# library name
-LIB = librte_pmd_bbdev_null.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring -lrte_kvargs
-LDLIBS += -lrte_bbdev
-LDLIBS += -lrte_bus_vdev
-
-# versioning export map
-EXPORT_MAP := rte_pmd_bbdev_null_version.map
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL) += bbdev_null.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/baseband/turbo_sw/Makefile deleted +0 -52

52 lines not on this page · raw message

drivers/bus/Makefile deleted +0 -15
deleted file mode 100644
index cea3b55e60..0000000000
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2016 NXP
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-$(CONFIG_RTE_LIBRTE_DPAA_BUS) += dpaa
-ifeq ($(CONFIG_RTE_EAL_VFIO),y)
-DIRS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += fslmc
-endif
-DIRS-$(CONFIG_RTE_LIBRTE_IFPGA_BUS) += ifpga
-DIRS-$(CONFIG_RTE_LIBRTE_PCI_BUS) += pci
-DIRS-$(CONFIG_RTE_LIBRTE_VDEV_BUS) += vdev
-DIRS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus
-
-include $(RTE_SDK)/mk/rte.subdir.mk
drivers/bus/dpaa/Makefile deleted +0 -48

48 lines not on this page · raw message

drivers/bus/fslmc/Makefile deleted +0 -47

47 lines not on this page · raw message

drivers/bus/ifpga/Makefile deleted +0 -28
deleted file mode 100644
index 1df369103c..0000000000
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_bus_ifpga.a
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-LDLIBS += -lrte_eal
-LDLIBS += -lrte_rawdev
-LDLIBS += -lrte_kvargs
-
-# versioning export map
-EXPORT_MAP := rte_bus_ifpga_version.map
-
-SRCS-$(CONFIG_RTE_LIBRTE_IFPGA_BUS) += ifpga_bus.c
-SRCS-$(CONFIG_RTE_LIBRTE_IFPGA_BUS) += ifpga_common.c
-
-#
-# Export include files
-#
-SYMLINK-$(CONFIG_RTE_LIBRTE_IFPGA_BUS)-include += rte_bus_ifpga.h
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/bus/pci/Makefile deleted +0 -33
deleted file mode 100644
index f4102d0a7f..0000000000
@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 6WIND S.A.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-LIB = librte_bus_pci.a
-EXPORT_MAP := rte_bus_pci_version.map
-
-CFLAGS := -I$(SRCDIR) $(CFLAGS)
-CFLAGS += -O3 $(WERROR_FLAGS)
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),)
-SYSTEM := linux
-endif
-ifneq ($(CONFIG_RTE_EXEC_ENV_FREEBSD),)
-SYSTEM := bsd
-endif
-
-CFLAGS += -I$(RTE_SDK)/drivers/bus/pci/$(SYSTEM)
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common
-
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_pci -lrte_kvargs
-
-include $(RTE_SDK)/drivers/bus/pci/$(SYSTEM)/Makefile
-SRCS-$(CONFIG_RTE_LIBRTE_PCI_BUS) := $(addprefix $(SYSTEM)/,$(SRCS))
-SRCS-$(CONFIG_RTE_LIBRTE_PCI_BUS) += pci_params.c
-SRCS-$(CONFIG_RTE_LIBRTE_PCI_BUS) += pci_common.c
-SRCS-$(CONFIG_RTE_LIBRTE_PCI_BUS) += pci_common_uio.c
-
-SYMLINK-$(CONFIG_RTE_LIBRTE_PCI_BUS)-include += rte_bus_pci.h
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/bus/pci/bsd/Makefile deleted +0 -4
deleted file mode 100644
index c1b54c05ef..0000000000
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 6WIND S.A.
-
-SRCS += pci.c
drivers/bus/pci/linux/Makefile deleted +0 -6
deleted file mode 100644
index 90404468b0..0000000000
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 6WIND S.A.
-
-SRCS += pci.c
-SRCS += pci_uio.c
-SRCS += pci_vfio.c
drivers/bus/vdev/Makefile deleted +0 -27
deleted file mode 100644
index 01747f03a4..0000000000
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_bus_vdev.a
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-# versioning export map
-EXPORT_MAP := rte_bus_vdev_version.map
-
-SRCS-y += vdev.c
-SRCS-y += vdev_params.c
-
-LDLIBS += -lrte_eal -lrte_kvargs
-
-#
-# Export include files
-#
-SYMLINK-y-include += rte_bus_vdev.h
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/bus/vmbus/Makefile deleted +0 -33
deleted file mode 100644
index 335df6a0ba..0000000000
@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-LIB = librte_bus_vmbus.a
-EXPORT_MAP := rte_bus_vmbus_version.map
-
-CFLAGS += -I$(SRCDIR)
-CFLAGS += -O3 $(WERROR_FLAGS)
-
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),)
-SYSTEM := linux
-endif
-ifneq ($(CONFIG_RTE_EXEC_ENV_FREEBSD),)
-$(error "VMBUS not implemented for BSD yet")
-endif
-
-CFLAGS += -I$(RTE_SDK)/drivers/bus/vmbus/$(SYSTEM)
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common
-
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_ethdev
-
-include $(RTE_SDK)/drivers/bus/vmbus/$(SYSTEM)/Makefile
-SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) := $(addprefix $(SYSTEM)/,$(SRCS))
-SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus_common.c
-SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus_channel.c vmbus_bufring.c
-SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus_common_uio.c
-
-SYMLINK-$(CONFIG_RTE_LIBRTE_VMBUS)-include += rte_bus_vmbus.h
-SYMLINK-$(CONFIG_RTE_LIBRTE_VMBUS)-include += rte_vmbus_reg.h
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/bus/vmbus/linux/Makefile deleted +0 -3
deleted file mode 100644
index ef0d30b2d3..0000000000
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-
-SRCS += vmbus_bus.c vmbus_uio.c
drivers/common/Makefile deleted +0 -39
deleted file mode 100644
index cfb6b4dc88..0000000000
@@ -1,39 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Cavium, Inc
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-CPT-y := $(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO)
-CPT-y += $(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO)
-ifneq (,$(findstring y,$(CPT-y)))
-DIRS-y += cpt
-endif
-
-ifeq ($(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF)$(CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL),yy)
-DIRS-y += octeontx
-endif
-OCTEONTX2-y := $(CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL)
-OCTEONTX2-y += $(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO)
-ifeq ($(findstring y,$(OCTEONTX2-y)),y)
-DIRS-y += octeontx2
-endif
-
-MVEP-y := $(CONFIG_RTE_LIBRTE_MVPP2_PMD)
-MVEP-y += $(CONFIG_RTE_LIBRTE_MVNETA_PMD)
-MVEP-y += $(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO)
-ifneq (,$(findstring y,$(MVEP-y)))
-DIRS-y += mvep
-endif
-
-ifeq ($(CONFIG_RTE_LIBRTE_COMMON_DPAAX),y)
-DIRS-y += dpaax
-endif
-
-IAVF-y := $(CONFIG_RTE_LIBRTE_IAVF_PMD)
-IAVF-y += $(CONFIG_RTE_LIBRTE_ICE_PMD)
-ifneq (,$(findstring y,$(IAVF-y)))
-DIRS-y += iavf
-endif
-
-include $(RTE_SDK)/mk/rte.subdir.mk
drivers/common/cpt/Makefile deleted +0 -24
deleted file mode 100644
index cab9da73c8..0000000000
@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Cavium, Inc
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_common_cpt.a
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -I$(RTE_SDK)/drivers/bus/pci
-EXPORT_MAP := rte_common_cpt_version.map
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-y += cpt_fpm_tables.c
-SRCS-y += cpt_pmd_ops_helper.c
-
-LDLIBS += -lrte_eal
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/common/dpaax/Makefile deleted +0 -30
deleted file mode 100644
index 2f4b924fda..0000000000
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2018 NXP
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_common_dpaax.a
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -Wno-pointer-arith
-CFLAGS += -Wno-cast-qual
-
-CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax
-CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax/caamflib
-
-# versioning export map
-EXPORT_MAP := rte_common_dpaax_version.map
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-y += dpaax_iova_table.c dpaa_of.c caamflib.c
-
-LDLIBS += -lrte_eal
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/common/iavf/Makefile deleted +0 -27
deleted file mode 100644
index f06dafd408..0000000000
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_common_iavf.a
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -Wno-pointer-arith
-CFLAGS += -Wno-cast-qual
-
-EXPORT_MAP := rte_common_iavf_version.map
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-y += iavf_adminq.c
-SRCS-y += iavf_common.c
-SRCS-y += iavf_impl.c
-
-LDLIBS += -lrte_eal
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/common/mlx5/Makefile deleted +0 -404

404 lines not on this page · raw message

drivers/common/mvep/Makefile deleted +0 -35
deleted file mode 100644
index f91d295e5c..0000000000
@@ -1,35 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Marvell International Ltd.
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(MAKECMDGOALS),clean)
-ifneq ($(MAKECMDGOALS),config)
-ifeq ($(LIBMUSDK_PATH),)
-$(error "Please define LIBMUSDK_PATH environment variable")
-endif
-endif
-endif
-
-# library name
-LIB = librte_common_mvep.a
-
-# versioning export map
-EXPORT_MAP := rte_common_mvep_version.map
-
-# external library dependencies
-CFLAGS += -I$($RTE_SDK)/drivers/common/mvep
-CFLAGS += -I$(LIBMUSDK_PATH)/include
-CFLAGS += -DMVCONF_TYPES_PUBLIC
-CFLAGS += -DMVCONF_DMA_PHYS_ADDR_T_PUBLIC
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -O3
-LDLIBS += -L$(LIBMUSDK_PATH)/lib
-LDLIBS += -lmusdk
-LDLIBS += -lrte_eal -lrte_kvargs
-
-# library source files
-SRCS-y += mvep_common.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/common/octeontx/Makefile deleted +0 -22
deleted file mode 100644
index 5e67df0583..0000000000
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Cavium, Inc
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_common_octeontx.a
-
-CFLAGS += $(WERROR_FLAGS)
-EXPORT_MAP := rte_common_octeontx_version.map
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-y += octeontx_mbox.c
-
-LDLIBS += -lrte_eal
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/common/octeontx2/Makefile deleted +0 -39
deleted file mode 100644
index 260da8dd3e..0000000000
@@ -1,39 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(C) 2019 Marvell International Ltd.
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_common_octeontx2.a
-
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx2
-CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2
-CFLAGS += -I$(RTE_SDK)/drivers/bus/pci
-
-ifneq ($(CONFIG_RTE_ARCH_64),y)
-CFLAGS += -Wno-int-to-pointer-cast
-CFLAGS += -Wno-pointer-to-int-cast
-ifeq ($(CONFIG_RTE_TOOLCHAIN_ICC),y)
-CFLAGS += -diag-disable 2259
-endif
-endif
-
-EXPORT_MAP := rte_common_octeontx2_version.map
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-y += otx2_dev.c
-SRCS-y += otx2_irq.c
-SRCS-y += otx2_mbox.c
-SRCS-y += otx2_common.c
-SRCS-y += otx2_sec_idev.c
-
-LDLIBS += -lrte_eal
-LDLIBS += -lrte_ethdev -lrte_kvargs
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/common/qat/Makefile deleted +0 -74

74 lines not on this page · raw message

drivers/compress/Makefile deleted +0 -10
deleted file mode 100644
index 286ea6ee84..0000000000
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_ISAL) += isal
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF) += octeontx
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_ZLIB) += zlib
-
-include $(RTE_SDK)/mk/rte.subdir.mk
drivers/compress/isal/Makefile deleted +0 -27
deleted file mode 100644
index 1e225ab434..0000000000
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_isal_comp.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-# external library dependencies
-LDLIBS += -lisal
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_compressdev
-LDLIBS += -lrte_bus_vdev
-
-# versioning export map
-EXPORT_MAP := rte_pmd_isal_version.map
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_ISAL) += isal_compress_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_ISAL) += isal_compress_pmd_ops.c
-
-# export include files
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/compress/octeontx/Makefile deleted +0 -26
deleted file mode 100644
index 9ba1db791e..0000000000
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Cavium, Inc
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_octeontx_zip.a
-
-# build flags
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -O3
-CFLAGS += -I$(RTE_SDK)/drivers/compress/octeontx/include
-
-# external library include paths
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_compressdev
-LDLIBS += -lrte_pci -lrte_bus_pci
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF) += otx_zip_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF) += otx_zip.c
-
-# versioning export map
-EXPORT_MAP := rte_pmd_octeontx_compress_version.map
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/compress/zlib/Makefile deleted +0 -25
deleted file mode 100644
index 9f695f7d9a..0000000000
@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Cavium Networks
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_zlib.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-# versioning export map
-EXPORT_MAP := rte_pmd_zlib_version.map
-
-# external library dependencies
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring -lz
-LDLIBS += -lrte_compressdev
-LDLIBS += -lrte_bus_vdev
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_ZLIB) += zlib_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_ZLIB) += zlib_pmd_ops.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/Makefile deleted +0 -31
deleted file mode 100644
index 47a2a9e794..0000000000
@@ -1,31 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2017 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += aesni_gcm
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += aesni_mb
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += armv8
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_CCP) += ccp
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += octeontx
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO) += octeontx2
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += openssl
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += snow3g
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += kasumi
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += zuc
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += mvsam
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += null
-ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += dpaa2_sec
-endif # CONFIG_RTE_LIBRTE_FSLMC_BUS
-ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA_SEC) += dpaa_sec
-endif # CONFIG_RTE_LIBRTE_PMD_DPAA_SEC
-ifeq ($(CONFIG_RTE_LIBRTE_SECURITY),y)
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += caam_jr
-endif # CONFIG_RTE_LIBRTE_SECURITY
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO) += virtio
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox
-
-include $(RTE_SDK)/mk/rte.subdir.mk
drivers/crypto/aesni_gcm/Makefile deleted +0 -43

43 lines not on this page · raw message

drivers/crypto/aesni_mb/Makefile deleted +0 -42

42 lines not on this page · raw message

drivers/crypto/armv8/Makefile deleted +0 -36
deleted file mode 100644
index 0e3bc9fb70..0000000000
@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Cavium, Inc
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(MAKECMDGOALS),clean)
-ifneq ($(MAKECMDGOALS),config)
-ifeq ($(ARMV8_CRYPTO_LIB_PATH),)
-$(error "Please define ARMV8_CRYPTO_LIB_PATH environment variable")
-endif
-endif
-endif
-
-# library name
-LIB = librte_pmd_armv8.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-# versioning export map
-EXPORT_MAP := rte_pmd_armv8_version.map
-
-# external library dependencies
-CFLAGS += -I$(ARMV8_CRYPTO_LIB_PATH)
-LDLIBS += -L$(ARMV8_CRYPTO_LIB_PATH) -lAArch64crypto
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_cryptodev
-LDLIBS += -lrte_bus_vdev
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += rte_armv8_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += rte_armv8_pmd_ops.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/caam_jr/Makefile deleted +0 -39
deleted file mode 100644
index 89d3238172..0000000000
@@ -1,39 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2017 NXP
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_pmd_caam_jr.a
-
-# build flags
-CFLAGS += -D _GNU_SOURCE
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include
-CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax
-CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax/caamflib/
-CFLAGS += -I$(RTE_SDK)/drivers/crypto/caam_jr
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
-
-# versioning export map
-EXPORT_MAP := rte_pmd_caam_jr_version.map
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += caam_jr.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += caam_jr_capabilities.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += caam_jr_hw.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += caam_jr_uio.c
-# library dependencies
-
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_cryptodev
-LDLIBS += -lrte_bus_dpaa
-LDLIBS += -lrte_bus_vdev
-LDLIBS += -lrte_common_dpaax
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/ccp/Makefile deleted +0 -32
deleted file mode 100644
index 3f5da2adf3..0000000000
@@ -1,32 +0,0 @@
-#   SPDX-License-Identifier: BSD-3-Clause
-#   Copyright(c) 2018 Advanced Micro Devices, Inc. All rights reserved.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_ccp.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += -I$(SRCDIR)
-CFLAGS += $(WERROR_FLAGS)
-
-# external library include paths
-LDLIBS += -lcrypto
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_cryptodev
-LDLIBS += -lrte_pci -lrte_bus_pci
-LDLIBS += -lrte_bus_vdev
-LDLIBS += -lrte_kvargs
-
-# versioning export map
-EXPORT_MAP := rte_pmd_ccp_version.map
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CCP) += rte_ccp_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CCP) += ccp_crypto.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CCP) += ccp_dev.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CCP) += ccp_pci.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CCP) += ccp_pmd_ops.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/dpaa2_sec/Makefile deleted +0 -45

45 lines not on this page · raw message

drivers/crypto/dpaa_sec/Makefile deleted +0 -38
deleted file mode 100644
index ea266962a3..0000000000
@@ -1,38 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
-# Copyright 2017 NXP
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_pmd_dpaa_sec.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa
-CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include
-CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/base/qbman
-CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax
-CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa_sec/
-CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax/caamflib/
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_cryptodev
-
-# versioning export map
-EXPORT_MAP := rte_pmd_dpaa_sec_version.map
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_DPAA_SEC) += dpaa_sec.c
-
-# library dependencies
-
-LDLIBS += -lrte_bus_dpaa
-LDLIBS += -lrte_mempool_dpaa
-LDLIBS += -lrte_common_dpaax
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/kasumi/Makefile deleted +0 -42

42 lines not on this page · raw message

drivers/crypto/mvsam/Makefile deleted +0 -40
deleted file mode 100644
index f0641ae7d9..0000000000
@@ -1,40 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Marvell International Ltd.
-# Copyright(c) 2017 Semihalf.
-# All rights reserved.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(MAKECMDGOALS),clean)
-ifneq ($(MAKECMDGOALS),config)
-ifeq ($(LIBMUSDK_PATH),)
-$(error "Please define LIBMUSDK_PATH environment variable")
-endif
-endif
-endif
-
-# library name
-LIB = librte_pmd_mvsam_crypto.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -I$(RTE_SDK)/drivers/common/mvep
-CFLAGS += -I$(LIBMUSDK_PATH)/include
-CFLAGS += -DMVCONF_TYPES_PUBLIC
-CFLAGS += -DMVCONF_DMA_PHYS_ADDR_T_PUBLIC
-
-# versioning export map
-EXPORT_MAP := rte_pmd_mvsam_version.map
-
-# external library dependencies
-LDLIBS += -L$(LIBMUSDK_PATH)/lib -lmusdk
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_kvargs
-LDLIBS += -lrte_cryptodev
-LDLIBS += -lrte_bus_vdev -lrte_common_mvep
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += rte_mrvl_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += rte_mrvl_pmd_ops.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/nitrox/Makefile deleted +0 -30
deleted file mode 100644
index 535121196b..0000000000
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(C) 2019 Marvell International Ltd.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_nitrox.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-# versioning export map
-EXPORT_MAP := rte_pmd_nitrox_version.map
-
-# external library dependencies
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool
-LDLIBS += -lrte_pci -lrte_bus_pci
-LDLIBS += -lrte_cryptodev
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_device.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_hal.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_logs.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_sym.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_sym_capabilities.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_sym_reqmgr.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_qp.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/null/Makefile deleted +0 -27
deleted file mode 100644
index 4595055f01..0000000000
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-
-# library name
-LIB = librte_pmd_null_crypto.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_cryptodev
-LDLIBS += -lrte_bus_vdev
-
-# versioning export map
-EXPORT_MAP := rte_pmd_null_crypto_version.map
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += null_crypto_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += null_crypto_pmd_ops.c
-
-# export include files
-SYMLINK-y-include +=
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/octeontx/Makefile deleted +0 -36
deleted file mode 100644
index 296755ee90..0000000000
@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Cavium, Inc
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_octeontx_crypto.a
-
-# build flags
-CFLAGS += $(WERROR_FLAGS)
-
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_cryptodev
-LDLIBS += -lrte_pci -lrte_bus_pci
-LDLIBS += -lrte_common_cpt
-
-VPATH += $(RTE_SDK)/drivers/crypto/octeontx
-
-CFLAGS += -O3
-CFLAGS += -I$(RTE_SDK)/drivers/common/cpt
-
-# PMD code
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev_capabilities.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev_hw_access.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev_mbox.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev_ops.c
-
-# export include files
-SYMLINK-y-include +=
-
-# versioning export map
-EXPORT_MAP := rte_pmd_octeontx_crypto_version.map
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/octeontx2/Makefile deleted +0 -49

49 lines not on this page · raw message

drivers/crypto/openssl/Makefile deleted +0 -26
deleted file mode 100644
index b85c816551..0000000000
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_openssl.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-# versioning export map
-EXPORT_MAP := rte_pmd_openssl_version.map
-
-# external library dependencies
-LDLIBS += -lcrypto
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_cryptodev
-LDLIBS += -lrte_bus_vdev
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += rte_openssl_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += rte_openssl_pmd_ops.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/scheduler/Makefile deleted +0 -34
deleted file mode 100644
index 67aac024c4..0000000000
@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_crypto_scheduler.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_cryptodev -lrte_kvargs -lrte_reorder
-LDLIBS += -lrte_bus_vdev
-
-# versioning export map
-EXPORT_MAP := rte_pmd_crypto_scheduler_version.map
-
-#
-# Export include files
-#
-SYMLINK-y-include += rte_cryptodev_scheduler_operations.h
-SYMLINK-y-include += rte_cryptodev_scheduler.h
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd_ops.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += rte_cryptodev_scheduler.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_roundrobin.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pkt_size_distr.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_failover.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_multicore.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/snow3g/Makefile deleted +0 -43

43 lines not on this page · raw message

drivers/crypto/virtio/Makefile deleted +0 -33
deleted file mode 100644
index 32e2e4d5e9..0000000000
@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 HUAWEI TECHNOLOGIES CO., LTD.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_pmd_virtio_crypto.a
-
-#
-# include virtio_crypto.h
-#
-CFLAGS += -I$(RTE_SDK)/lib/librte_vhost
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-EXPORT_MAP := rte_pmd_virtio_crypto_version.map
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO) += virtqueue.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO) += virtio_pci.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO) += virtio_rxtx.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO) += virtio_cryptodev.c
-
-# this lib depends upon:
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool
-LDLIBS += -lrte_cryptodev
-LDLIBS += -lrte_pci -lrte_bus_pci
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/crypto/zuc/Makefile deleted +0 -42

42 lines not on this page · raw message

drivers/event/Makefile deleted +0 -20
deleted file mode 100644
index 86be41b9eb..0000000000
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016 Cavium, Inc
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += skeleton
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV) += dsw
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF) += octeontx
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV) += octeontx2
-ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV) += dpaa
-endif
-ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV) += dpaa2
-endif
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV) += opdl
-
-include $(RTE_SDK)/mk/rte.subdir.mk
drivers/event/dpaa/Makefile deleted +0 -39
deleted file mode 100644
index a39dc27c62..0000000000
@@ -1,39 +0,0 @@
-#   SPDX-License-Identifier:        BSD-3-Clause
-#   Copyright 2017 NXP
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-RTE_SDK_DPAA=$(RTE_SDK)/drivers/net/dpaa
-
-#
-# library name
-#
-LIB = librte_pmd_dpaa_event.a
-
-CFLAGS := -I$(SRCDIR) $(CFLAGS)
-CFLAGS += -O3 $(WERROR_FLAGS)
-CFLAGS += -Wno-pointer-arith
-CFLAGS += -I$(RTE_SDK_DPAA)/
-CFLAGS += -I$(RTE_SDK_DPAA)/include
-CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa
-CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include/
-CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa
-CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
-
-LDLIBS += -lrte_pmd_dpaa_sec
-CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa_sec
-
-EXPORT_MAP := rte_pmd_dpaa_event_version.map
-
-# Interfaces with DPDK
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV) += dpaa_eventdev.c
-
-LDLIBS += -lrte_bus_dpaa
-LDLIBS += -lrte_mempool_dpaa
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
-LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
-LDLIBS += -lrte_eventdev -lrte_pmd_dpaa -lrte_bus_vdev
-LDLIBS += -lrte_common_dpaax
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/event/dpaa2/Makefile deleted +0 -41

41 lines not on this page · raw message

drivers/event/dsw/Makefile deleted +0 -26
deleted file mode 100644
index f6e7dda1fd..0000000000
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Ericsson AB
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-LIB = librte_pmd_dsw_event.a
-
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-ifneq ($(CONFIG_RTE_TOOLCHAIN_ICC),y)
-CFLAGS += -Wno-format-nonliteral
-endif
-
-LDLIBS += -lrte_eal
-LDLIBS += -lrte_mbuf
-LDLIBS += -lrte_mempool
-LDLIBS += -lrte_ring
-LDLIBS += -lrte_eventdev
-LDLIBS += -lrte_bus_vdev
-
-EXPORT_MAP := rte_pmd_dsw_event_version.map
-
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV) += \
-	dsw_evdev.c dsw_event.c dsw_xstats.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/event/octeontx/Makefile deleted +0 -51

51 lines not on this page · raw message

drivers/event/octeontx2/Makefile deleted +0 -47

47 lines not on this page · raw message

drivers/event/opdl/Makefile deleted +0 -29
deleted file mode 100644
index 71713b00ae..0000000000
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2017 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_opdl_event.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-LDLIBS += -lrte_eal -lrte_eventdev -lrte_kvargs
-LDLIBS += -lrte_bus_vdev -lrte_mbuf -lrte_mempool
-
-# versioning export map
-EXPORT_MAP := rte_pmd_opdl_event_version.map
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV) += opdl_ring.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV) += opdl_evdev.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV) += opdl_evdev_init.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV) += opdl_evdev_xstats.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV) += opdl_test.c
-
-# export include files
-SYMLINK-y-include +=
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/event/skeleton/Makefile deleted +0 -24
deleted file mode 100644
index dc85ad3c4b..0000000000
@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016 Cavium, Inc
-#
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-#
-# library name
-#
-LIB = librte_pmd_skeleton_event.a
-
-CFLAGS += $(WERROR_FLAGS)
-LDLIBS += -lrte_eal -lrte_eventdev
-LDLIBS += -lrte_pci -lrte_bus_pci
-LDLIBS += -lrte_bus_vdev
-
-EXPORT_MAP := rte_pmd_skeleton_event_version.map
-
-#
-# all source are stored in SRCS-y
-#
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += skeleton_eventdev.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/event/sw/Makefile deleted +0 -29
deleted file mode 100644
index 8ea5cceb8b..0000000000
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2016-2017 Intel Corporation
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_sw_event.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-LDLIBS += -lrte_eal -lrte_eventdev -lrte_kvargs -lrte_ring
-LDLIBS += -lrte_mempool -lrte_mbuf
-LDLIBS += -lrte_bus_vdev
-
-# versioning export map
-EXPORT_MAP := rte_pmd_sw_event_version.map
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_scheduler.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_xstats.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_selftest.c
-
-# export include files
-SYMLINK-y-include +=
-
-include $(RTE_SDK)/mk/rte.lib.mk
drivers/mempool/Makefile deleted +0 -18
deleted file mode 100644
index 29ef73bf44..0000000000
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2017 NXP
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-DIRS-$(CONFIG_RTE_DRIVER_MEMPOOL_BUCKET) += bucket
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

drivers/mempool/bucket/Makefile deleted +0 -25
deleted file mode 100644
index c766c35b2c..0000000000

Lines of this file are not shown. View the raw message.

drivers/mempool/dpaa/Makefile deleted +0 -30
deleted file mode 100644
index 144969c627..0000000000

Lines of this file are not shown. View the raw message.

drivers/mempool/dpaa2/Makefile deleted +0 -31
deleted file mode 100644
index 04db6d27de..0000000000

Lines of this file are not shown. View the raw message.

drivers/mempool/octeontx/Makefile deleted +0 -39
deleted file mode 100644
index 9c840620d9..0000000000

Lines of this file are not shown. View the raw message.

drivers/mempool/octeontx2/Makefile deleted +0 -40
deleted file mode 100644
index 3828219b11..0000000000

Lines of this file are not shown. View the raw message.

drivers/mempool/ring/Makefile deleted +0 -19
deleted file mode 100644
index 8624502da9..0000000000

Lines of this file are not shown. View the raw message.

drivers/mempool/stack/Makefile deleted +0 -22
deleted file mode 100644
index ccfd970400..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/Makefile deleted +0 -84

84 lines not on this page · raw message

drivers/net/af_packet/Makefile deleted +0 -27
deleted file mode 100644
index 91dbf0a692..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/af_xdp/Makefile deleted +0 -26
deleted file mode 100644
index 55db6085ac..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/ark/Makefile deleted +0 -39
deleted file mode 100644
index c02080bdd0..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/atlantic/Makefile deleted +0 -34
deleted file mode 100644
index 0d0d0a502d..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/avp/Makefile deleted +0 -29
deleted file mode 100644
index 075247b13a..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/axgbe/Makefile deleted +0 -33
deleted file mode 100644
index e421d0da11..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/bnx2x/Makefile deleted +0 -33
deleted file mode 100644
index 451434cc18..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/bnxt/Makefile deleted +0 -63

63 lines not on this page · raw message

drivers/net/bnxt/hcapi/Makefile deleted +0 -5
deleted file mode 100644
index a5bb398ad7..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/bnxt/tf_core/Makefile deleted +0 -31
deleted file mode 100644
index 84840366ab..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/bnxt/tf_ulp/Makefile deleted +0 -20
deleted file mode 100644
index abb68150d1..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/bonding/Makefile deleted +0 -36
deleted file mode 100644
index 728551a846..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/cxgbe/Makefile deleted +0 -57

57 lines not on this page · raw message

drivers/net/dpaa/Makefile deleted +0 -41

41 lines not on this page · raw message

drivers/net/dpaa2/Makefile deleted +0 -47

47 lines not on this page · raw message

drivers/net/e1000/Makefile deleted +0 -79

79 lines not on this page · raw message

drivers/net/ena/Makefile deleted +0 -30
deleted file mode 100644
index 8ccff36db7..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/enetc/Makefile deleted +0 -23
deleted file mode 100644
index 7276026e37..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/enic/Makefile deleted +0 -68

68 lines not on this page · raw message

drivers/net/failsafe/Makefile deleted +0 -43

43 lines not on this page · raw message

drivers/net/fm10k/Makefile deleted +0 -77

77 lines not on this page · raw message

drivers/net/hinic/Makefile deleted +0 -67

67 lines not on this page · raw message

drivers/net/hns3/Makefile deleted +0 -42

42 lines not on this page · raw message

drivers/net/i40e/Makefile deleted +0 -112

112 lines not on this page · raw message

drivers/net/iavf/Makefile deleted +0 -54

54 lines not on this page · raw message

drivers/net/ice/Makefile deleted +0 -96

96 lines not on this page · raw message

drivers/net/igc/Makefile deleted +0 -40
deleted file mode 100644
index d6d7959d2d..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/ionic/Makefile deleted +0 -31
deleted file mode 100644
index 7442e2c5cb..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/ipn3ke/Makefile deleted +0 -38
deleted file mode 100644
index 40696dbde8..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/ixgbe/Makefile deleted +0 -110

110 lines not on this page · raw message

drivers/net/kni/Makefile deleted +0 -30
deleted file mode 100644
index 0694ffd021..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/liquidio/Makefile deleted +0 -30
deleted file mode 100644
index d7fda7f527..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/memif/Makefile deleted +0 -26
deleted file mode 100644
index 3bf4ddce4c..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/mlx4/Makefile deleted +0 -142

142 lines not on this page · raw message

drivers/net/mlx5/Makefile deleted +0 -82

82 lines not on this page · raw message

drivers/net/mvneta/Makefile deleted +0 -39
deleted file mode 100644
index 41e50479ff..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/mvpp2/Makefile deleted +0 -42

42 lines not on this page · raw message

drivers/net/netvsc/Makefile deleted +0 -21
deleted file mode 100644
index da8991584a..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/nfb/Makefile deleted +0 -40
deleted file mode 100644
index e92d29dcd3..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/nfp/Makefile deleted +0 -41

41 lines not on this page · raw message

drivers/net/null/Makefile deleted +0 -24
deleted file mode 100644
index f51150c131..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/octeontx/Makefile deleted +0 -53

53 lines not on this page · raw message

drivers/net/octeontx2/Makefile deleted +0 -63

63 lines not on this page · raw message

drivers/net/pcap/Makefile deleted +0 -32
deleted file mode 100644
index f243d1a0fa..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/pfe/Makefile deleted +0 -31
deleted file mode 100644
index 75d30b01aa..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/qede/Makefile deleted +0 -109

109 lines not on this page · raw message

drivers/net/ring/Makefile deleted +0 -29
deleted file mode 100644
index d6a3dec350..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/sfc/Makefile deleted +0 -133

133 lines not on this page · raw message

drivers/net/softnic/Makefile deleted +0 -54

54 lines not on this page · raw message

drivers/net/szedata2/Makefile deleted +0 -30
deleted file mode 100644
index 675d0938a2..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/tap/Makefile deleted +0 -97

97 lines not on this page · raw message

drivers/net/thunderx/Makefile deleted +0 -41

41 lines not on this page · raw message

drivers/net/vdev_netvsc/Makefile deleted +0 -30
deleted file mode 100644
index 01d26fb798..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/vhost/Makefile deleted +0 -31
deleted file mode 100644
index 0461e29f2c..0000000000

Lines of this file are not shown. View the raw message.

drivers/net/virtio/Makefile deleted +0 -82

82 lines not on this page · raw message

drivers/net/vmxnet3/Makefile deleted +0 -53

53 lines not on this page · raw message

drivers/raw/Makefile deleted +0 -18
deleted file mode 100644
index 80b043eb14..0000000000

Lines of this file are not shown. View the raw message.

drivers/raw/dpaa2_cmdif/Makefile deleted +0 -35
deleted file mode 100644
index 227ec4896e..0000000000

Lines of this file are not shown. View the raw message.

drivers/raw/dpaa2_qdma/Makefile deleted +0 -36
deleted file mode 100644
index 7b2abdddb4..0000000000

Lines of this file are not shown. View the raw message.

drivers/raw/ifpga/Makefile deleted +0 -39
deleted file mode 100644
index 371e127f19..0000000000

Lines of this file are not shown. View the raw message.

drivers/raw/ifpga/base/Makefile deleted +0 -32
deleted file mode 100644
index c5bbcbd5f8..0000000000

Lines of this file are not shown. View the raw message.

drivers/raw/ioat/Makefile deleted +0 -28
deleted file mode 100644
index 1609fe5e6c..0000000000

Lines of this file are not shown. View the raw message.

drivers/raw/ntb/Makefile deleted +0 -28
deleted file mode 100644
index 8f0bff9b02..0000000000

Lines of this file are not shown. View the raw message.

drivers/raw/octeontx2_dma/Makefile deleted +0 -34
deleted file mode 100644
index c64ca3497a..0000000000

Lines of this file are not shown. View the raw message.

drivers/raw/octeontx2_ep/Makefile deleted +0 -42

42 lines not on this page · raw message

drivers/raw/skeleton/Makefile deleted +0 -26
deleted file mode 100644
index 2ac66fbd45..0000000000

Lines of this file are not shown. View the raw message.

drivers/regex/Makefile deleted +0 -8
deleted file mode 100644
index 906b20546f..0000000000

Lines of this file are not shown. View the raw message.

drivers/regex/mlx5/Makefile deleted +0 -41

41 lines not on this page · raw message

drivers/vdpa/Makefile deleted +0 -12
deleted file mode 100644
index 6e8835948e..0000000000

Lines of this file are not shown. View the raw message.

drivers/vdpa/ifc/Makefile deleted +0 -33
deleted file mode 100644
index b468bfdbdd..0000000000

Lines of this file are not shown. View the raw message.

drivers/vdpa/mlx5/Makefile deleted +0 -58

58 lines not on this page · raw message

examples/Makefile deleted +0 -90

90 lines not on this page · raw message

kernel/Makefile deleted +0 -9
deleted file mode 100644
index 5d51fd94bb..0000000000

Lines of this file are not shown. View the raw message.

kernel/freebsd/Makefile deleted +0 -9
deleted file mode 100644
index 522d3f68ff..0000000000

Lines of this file are not shown. View the raw message.

kernel/freebsd/contigmem/Makefile deleted +0 -24
deleted file mode 100644
index 428a7edee5..0000000000

Lines of this file are not shown. View the raw message.

kernel/freebsd/nic_uio/Makefile deleted +0 -24
deleted file mode 100644
index 376ef3a3ab..0000000000

Lines of this file are not shown. View the raw message.

kernel/linux/Makefile deleted +0 -9
deleted file mode 100644
index c2c45a3e67..0000000000

Lines of this file are not shown. View the raw message.

kernel/linux/igb_uio/Makefile deleted +0 -25
deleted file mode 100644
index f83bcc7c69..0000000000

Lines of this file are not shown. View the raw message.

kernel/linux/kni/Makefile deleted +0 -34
deleted file mode 100644
index 595bac2612..0000000000

Lines of this file are not shown. View the raw message.

lib/Makefile deleted +0 -138

138 lines not on this page · raw message

lib/librte_acl/Makefile deleted +0 -65

65 lines not on this page · raw message

lib/librte_bbdev/Makefile deleted +0 -25
deleted file mode 100644
index 9d7576b358..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_bitratestats/Makefile deleted +0 -20
deleted file mode 100644
index 4862c44b83..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_bpf/Makefile deleted +0 -40
deleted file mode 100644
index 3be6750432..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_cfgfile/Makefile deleted +0 -26
deleted file mode 100644
index 7c10a4e56c..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_cmdline/Makefile deleted +0 -34
deleted file mode 100644
index 619d9a2426..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_compressdev/Makefile deleted +0 -27
deleted file mode 100644
index 53679d69b8..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_cryptodev/Makefile deleted +0 -30
deleted file mode 100644
index 73e77a27c6..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_distributor/Makefile deleted +0 -28
deleted file mode 100644
index fc32fb3a8f..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_eal/Makefile deleted +0 -12
deleted file mode 100644
index 2fda40d230..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_eal/freebsd/Makefile deleted +0 -104

104 lines not on this page · raw message

lib/librte_eal/include/Makefile deleted +0 -19
deleted file mode 100644
index eb99190d10..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_eal/linux/Makefile deleted +0 -112

112 lines not on this page · raw message

lib/librte_efd/Makefile deleted +0 -21
deleted file mode 100644
index 2dc97132e0..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_ethdev/Makefile deleted +0 -46

46 lines not on this page · raw message

lib/librte_eventdev/Makefile deleted +0 -47

47 lines not on this page · raw message

lib/librte_fib/Makefile deleted +0 -22
deleted file mode 100644
index 1dd2a495b1..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_flow_classify/Makefile deleted +0 -23
deleted file mode 100644
index ca3cae82dd..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_graph/Makefile deleted +0 -28
deleted file mode 100644
index b66279c675..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_gro/Makefile deleted +0 -23
deleted file mode 100644
index e848687acd..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_gso/Makefile deleted +0 -25
deleted file mode 100644
index a34846e920..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_hash/Makefile deleted +0 -31
deleted file mode 100644
index ec9f864992..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_ip_frag/Makefile deleted +0 -27
deleted file mode 100644
index 6b80d9f1f2..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_ipsec/Makefile deleted +0 -29
deleted file mode 100644
index e4c69646b0..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_jobstats/Makefile deleted +0 -21
deleted file mode 100644
index b30d046829..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_kni/Makefile deleted +0 -20
deleted file mode 100644
index 9d440aa135..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_kvargs/Makefile deleted +0 -21
deleted file mode 100644
index 24b1c3c5b9..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_latencystats/Makefile deleted +0 -22
deleted file mode 100644
index b19e0b1788..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_lpm/Makefile deleted +0 -29
deleted file mode 100644
index 6f06c5c034..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_mbuf/Makefile deleted +0 -26
deleted file mode 100644
index 41ea5496e3..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_member/Makefile deleted +0 -22
deleted file mode 100644
index ef9e2faeaf..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_mempool/Makefile deleted +0 -24
deleted file mode 100644
index 432d6217ec..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_meter/Makefile deleted +0 -27
deleted file mode 100644
index 48366e82b0..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_metrics/Makefile deleted +0 -30
deleted file mode 100644
index 1264d3bbb0..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_net/Makefile deleted +0 -25
deleted file mode 100644
index 9830e771b3..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_node/Makefile deleted +0 -33
deleted file mode 100644
index 3ec02104d3..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_pci/Makefile deleted +0 -19
deleted file mode 100644
index 7943f30cab..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_pdump/Makefile deleted +0 -20
deleted file mode 100644
index ece8aaacc1..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_pipeline/Makefile deleted +0 -28
deleted file mode 100644
index cfbbd18282..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_port/Makefile deleted +0 -59

59 lines not on this page · raw message

lib/librte_power/Makefile deleted +0 -24
deleted file mode 100644
index 3b067b615f..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_rawdev/Makefile deleted +0 -24
deleted file mode 100644
index 99f5d2a471..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_rcu/Makefile deleted +0 -20
deleted file mode 100644
index 553bca2ef4..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_regexdev/Makefile deleted +0 -32
deleted file mode 100644
index c123fcaf5c..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_reorder/Makefile deleted +0 -21
deleted file mode 100644
index 1914411d52..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_rib/Makefile deleted +0 -22
deleted file mode 100644
index be80ce5d3f..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_ring/Makefile deleted +0 -30
deleted file mode 100644
index 83a9d0840e..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_sched/Makefile deleted +0 -29
deleted file mode 100644
index aee93a1205..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_security/Makefile deleted +0 -24
deleted file mode 100644
index 825eaeff8e..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_stack/Makefile deleted +0 -27
deleted file mode 100644
index 020ef102b5..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_table/Makefile deleted +0 -59

59 lines not on this page · raw message

lib/librte_telemetry/Makefile deleted +0 -30
deleted file mode 100644
index c62cbd86dc..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_timer/Makefile deleted +0 -20
deleted file mode 100644
index 7e95d120c0..0000000000

Lines of this file are not shown. View the raw message.

lib/librte_vhost/Makefile deleted +0 -54

54 lines not on this page · raw message

mk/arch/arm/rte.vars.mk deleted +0 -16
deleted file mode 100644
index dc8c10a24c..0000000000

Lines of this file are not shown. View the raw message.

mk/arch/arm64/rte.vars.mk deleted +0 -37
deleted file mode 100644
index a75b80c222..0000000000

Lines of this file are not shown. View the raw message.

mk/arch/i686/rte.vars.mk deleted +0 -36
deleted file mode 100644
index c867883f15..0000000000

Lines of this file are not shown. View the raw message.

mk/arch/ppc_64/rte.vars.mk deleted +0 -17
deleted file mode 100644
index 9f7ab22f42..0000000000

Lines of this file are not shown. View the raw message.

mk/arch/x86_64/rte.vars.mk deleted +0 -36
deleted file mode 100644
index e1689be9b4..0000000000

Lines of this file are not shown. View the raw message.

mk/arch/x86_x32/rte.vars.mk deleted +0 -40
deleted file mode 100644
index c59b37a2c8..0000000000

Lines of this file are not shown. View the raw message.

mk/exec-env/bsdapp deleted +0 -1
deleted file mode 120000
index 69f5cba2c2..0000000000

Lines of this file are not shown. View the raw message.

mk/exec-env/freebsd/rte.app.mk deleted +0 -8
deleted file mode 100644
index a2af7266a6..0000000000

Lines of this file are not shown. View the raw message.

mk/exec-env/freebsd/rte.vars.mk deleted +0 -36
deleted file mode 100644
index 630eb55f73..0000000000

Lines of this file are not shown. View the raw message.

mk/exec-env/linux/rte.app.mk deleted +0 -8
deleted file mode 100644
index a2af7266a6..0000000000

Lines of this file are not shown. View the raw message.

mk/exec-env/linux/rte.vars.mk deleted +0 -44

44 lines not on this page · raw message

mk/exec-env/linuxapp deleted +0 -1
deleted file mode 120000
index ce5e2c77b2..0000000000

Lines of this file are not shown. View the raw message.

mk/internal/rte.build-post.mk deleted +0 -34
deleted file mode 100644
index a6b6a9a46a..0000000000

Lines of this file are not shown. View the raw message.

mk/internal/rte.build-pre.mk deleted +0 -7
deleted file mode 100644
index 137612f19b..0000000000

Lines of this file are not shown. View the raw message.

mk/internal/rte.clean-post.mk deleted +0 -34
deleted file mode 100644
index 77685edd99..0000000000

Lines of this file are not shown. View the raw message.

mk/internal/rte.clean-pre.mk deleted +0 -4
deleted file mode 100644
index e21607bff9..0000000000

Lines of this file are not shown. View the raw message.

mk/internal/rte.compile-post.mk deleted +0 -5
deleted file mode 100644
index 01525bee1b..0000000000

Lines of this file are not shown. View the raw message.

mk/internal/rte.compile-pre.mk deleted +0 -164

164 lines not on this page · raw message

mk/internal/rte.extvars.mk deleted +0 -55

55 lines not on this page · raw message

mk/internal/rte.install-post.mk deleted +0 -71

71 lines not on this page · raw message

mk/internal/rte.install-pre.mk deleted +0 -32
deleted file mode 100644
index 4786d3b28b..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/armv7a/rte.vars.mk deleted +0 -36
deleted file mode 100644
index 44ebd68dae..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/armv8a/rte.vars.mk deleted +0 -31
deleted file mode 100644
index 5e3ffc3adf..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/default/rte.vars.mk deleted +0 -30
deleted file mode 100644
index df08d3b038..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/dpaa/rte.vars.mk deleted +0 -37
deleted file mode 100644
index 75df626ff2..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/emag/rte.vars.mk deleted +0 -32
deleted file mode 100644
index 50342dfa27..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/hsw/rte.vars.mk deleted +0 -30
deleted file mode 100644
index 39099e760e..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/ivb/rte.vars.mk deleted +0 -30
deleted file mode 100644
index 5b6563742a..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/n1sdp/rte.vars.mk deleted +0 -34
deleted file mode 100644
index 6d69de03c9..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/native/rte.vars.mk deleted +0 -39
deleted file mode 100644
index 8c96e3fa04..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/nhm/rte.vars.mk deleted +0 -30
deleted file mode 100644
index 91de5d9bed..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/octeontx2/rte.vars.mk deleted +0 -34
deleted file mode 100644
index e209cf4920..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/power8/rte.vars.mk deleted +0 -30
deleted file mode 100644
index 00e0834b8a..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/silvermont/rte.vars.mk deleted +0 -30
deleted file mode 100644
index e4f3fe42bd..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/snb/rte.vars.mk deleted +0 -30
deleted file mode 100644
index efe2f32d70..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/thunderx/rte.vars.mk deleted +0 -31
deleted file mode 100644
index 047741668c..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/thunderx2/rte.vars.mk deleted +0 -34
deleted file mode 100644
index b80dc8680c..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/wsm/rte.vars.mk deleted +0 -30
deleted file mode 100644
index e9bc3f9848..0000000000

Lines of this file are not shown. View the raw message.

mk/machine/xgene1/rte.vars.mk deleted +0 -31
deleted file mode 100644
index e632f3139b..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.app.mk deleted +0 -509

509 lines not on this page · raw message

mk/rte.bsdmodule.mk deleted +0 -89

89 lines not on this page · raw message

mk/rte.combinedlib.mk deleted +0 -30
deleted file mode 100644
index 9d0f935358..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.cpuflags.mk deleted +0 -124

124 lines not on this page · raw message

mk/rte.extapp.mk deleted +0 -24
deleted file mode 100644
index 427bb52306..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.extlib.mk deleted +0 -26
deleted file mode 100644
index 977873325d..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.extobj.mk deleted +0 -24
deleted file mode 100644
index c761a5de1e..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.extshared.mk deleted +0 -26
deleted file mode 100644
index 64269e1a85..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.extsubdir.mk deleted +0 -39
deleted file mode 100644
index 0f8ef94c50..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.gnuconfigure.mk deleted +0 -44

44 lines not on this page · raw message

mk/rte.helper.mk deleted +0 -10
deleted file mode 100644
index 6e7fd03d7f..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.hostapp.mk deleted +0 -93

93 lines not on this page · raw message

mk/rte.hostlib.mk deleted +0 -86

86 lines not on this page · raw message

mk/rte.install.mk deleted +0 -28
deleted file mode 100644
index e56daf457c..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.lib.mk deleted +0 -156

156 lines not on this page · raw message

mk/rte.module.mk deleted +0 -86

86 lines not on this page · raw message

mk/rte.obj.mk deleted +0 -82

82 lines not on this page · raw message

mk/rte.sdkbuild.mk deleted +0 -77

77 lines not on this page · raw message

mk/rte.sdkconfig.mk deleted +0 -142

142 lines not on this page · raw message

mk/rte.sdkdepdirs.mk deleted +0 -9
deleted file mode 100644
index 7adeb0e11b..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.sdkdoc.mk deleted +0 -104

104 lines not on this page · raw message

mk/rte.sdkexamples.mk deleted +0 -50

50 lines not on this page · raw message

mk/rte.sdkgcov.mk deleted +0 -39
deleted file mode 100644
index ab528b18b8..0000000000

Lines of this file are not shown. View the raw message.

mk/rte.sdkinstall.mk deleted +0 -152

152 lines not on this page · raw message

mk/rte.sdkroot.mk deleted +0 -115

115 lines not on this page · raw message

mk/rte.sdktest.mk deleted +0 -76

76 lines not on this page · raw message

mk/rte.shared.mk deleted +0 -108

108 lines not on this page · raw message

mk/rte.subdir.mk deleted +0 -65

65 lines not on this page · raw message

mk/rte.vars.mk deleted +0 -102

102 lines not on this page · raw message

mk/target/generic/rte.app.mk deleted +0 -13
deleted file mode 100644
index ed82656f18..0000000000

Lines of this file are not shown. View the raw message.

mk/target/generic/rte.vars.mk deleted +0 -132

132 lines not on this page · raw message

mk/toolchain/clang/rte.toolchain-compat.mk deleted +0 -22
deleted file mode 100644
index e6189b498d..0000000000

Lines of this file are not shown. View the raw message.

mk/toolchain/clang/rte.vars.mk deleted +0 -60

60 lines not on this page · raw message

mk/toolchain/gcc/rte.toolchain-compat.mk deleted +0 -120

120 lines not on this page · raw message

mk/toolchain/gcc/rte.vars.mk deleted +0 -109

109 lines not on this page · raw message

mk/toolchain/icc/rte.toolchain-compat.mk deleted +0 -58

58 lines not on this page · raw message

mk/toolchain/icc/rte.vars.mk deleted +0 -62

62 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.17.1

Part of the diff is not shown here. View the raw message.

#120 lore raw

PATCH v3 11/37 config: remove all config files used by make

In reply to Ciara Power

Make is not supported for compiling DPDK, the config files are no longer needed.

---
 config/common_armv8a_linux                    |   43 -
 config/common_base                            | 1154 -----------------
 config/common_freebsd                         |   15 -
 config/common_linux                           |   68 -
 config/defconfig_arm-armv7a-linux-gcc         |    1 -
 config/defconfig_arm-armv7a-linuxapp-gcc      |   49 -
 config/defconfig_arm64-armada-linux-gcc       |    1 -
 config/defconfig_arm64-armada-linuxapp-gcc    |   41 -
 config/defconfig_arm64-armv8a-linux-clang     |    1 -
 config/defconfig_arm64-armv8a-linux-gcc       |    1 -
 config/defconfig_arm64-armv8a-linuxapp-clang  |    8 -
 config/defconfig_arm64-armv8a-linuxapp-gcc    |    9 -
 config/defconfig_arm64-bluefield-linux-gcc    |    1 -
 config/defconfig_arm64-bluefield-linuxapp-gcc |   18 -
 config/defconfig_arm64-dpaa-linux-gcc         |    1 -
 config/defconfig_arm64-dpaa-linuxapp-gcc      |   31 -
 config/defconfig_arm64-emag-linux-gcc         |    1 -
 config/defconfig_arm64-emag-linuxapp-gcc      |   11 -
 config/defconfig_arm64-n1sdp-linux-gcc        |    1 -
 config/defconfig_arm64-n1sdp-linuxapp-gcc     |   14 -
 config/defconfig_arm64-octeontx2-linux-gcc    |    1 -
 config/defconfig_arm64-octeontx2-linuxapp-gcc |   18 -
 config/defconfig_arm64-stingray-linux-gcc     |    1 -
 config/defconfig_arm64-stingray-linuxapp-gcc  |   14 -
 config/defconfig_arm64-thunderx-linux-gcc     |    1 -
 config/defconfig_arm64-thunderx-linuxapp-gcc  |   17 -
 config/defconfig_arm64-thunderx2-linux-gcc    |    1 -
 config/defconfig_arm64-thunderx2-linuxapp-gcc |   12 -
 config/defconfig_arm64-xgene1-linux-gcc       |    1 -
 config/defconfig_arm64-xgene1-linuxapp-gcc    |    8 -
 config/defconfig_i686-native-linux-gcc        |    1 -
 config/defconfig_i686-native-linux-icc        |    1 -
 config/defconfig_i686-native-linuxapp-gcc     |   66 -
 config/defconfig_i686-native-linuxapp-icc     |   66 -
 config/defconfig_ppc_64-power8-linux-gcc      |    1 -
 config/defconfig_ppc_64-power8-linuxapp-gcc   |   35 -
 config/defconfig_x86_64-native-bsdapp-clang   |   14 -
 config/defconfig_x86_64-native-bsdapp-gcc     |   14 -
 config/defconfig_x86_64-native-freebsd-clang  |    1 -
 config/defconfig_x86_64-native-freebsd-gcc    |    1 -
 config/defconfig_x86_64-native-linux-clang    |    1 -
 config/defconfig_x86_64-native-linux-gcc      |    1 -
 config/defconfig_x86_64-native-linux-icc      |    1 -
 config/defconfig_x86_64-native-linuxapp-clang |   14 -
 config/defconfig_x86_64-native-linuxapp-gcc   |   14 -
 config/defconfig_x86_64-native-linuxapp-icc   |   29 -
 config/defconfig_x86_x32-native-linux-gcc     |    1 -
 config/defconfig_x86_x32-native-linuxapp-gcc  |   46 -
 48 files changed, 1850 deletions(-)
 delete mode 100644 config/common_armv8a_linux
 delete mode 100644 config/common_base
 delete mode 100644 config/common_freebsd
 delete mode 100644 config/common_linux
 delete mode 120000 config/defconfig_arm-armv7a-linux-gcc
 delete mode 100644 config/defconfig_arm-armv7a-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-armada-linux-gcc
 delete mode 100644 config/defconfig_arm64-armada-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-armv8a-linux-clang
 delete mode 120000 config/defconfig_arm64-armv8a-linux-gcc
 delete mode 100644 config/defconfig_arm64-armv8a-linuxapp-clang
 delete mode 100644 config/defconfig_arm64-armv8a-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-bluefield-linux-gcc
 delete mode 100644 config/defconfig_arm64-bluefield-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-dpaa-linux-gcc
 delete mode 100644 config/defconfig_arm64-dpaa-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-emag-linux-gcc
 delete mode 100644 config/defconfig_arm64-emag-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-n1sdp-linux-gcc
 delete mode 100644 config/defconfig_arm64-n1sdp-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-octeontx2-linux-gcc
 delete mode 100644 config/defconfig_arm64-octeontx2-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-stingray-linux-gcc
 delete mode 100644 config/defconfig_arm64-stingray-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-thunderx-linux-gcc
 delete mode 100644 config/defconfig_arm64-thunderx-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-thunderx2-linux-gcc
 delete mode 100644 config/defconfig_arm64-thunderx2-linuxapp-gcc
 delete mode 120000 config/defconfig_arm64-xgene1-linux-gcc
 delete mode 100644 config/defconfig_arm64-xgene1-linuxapp-gcc
 delete mode 120000 config/defconfig_i686-native-linux-gcc
 delete mode 120000 config/defconfig_i686-native-linux-icc
 delete mode 100644 config/defconfig_i686-native-linuxapp-gcc
 delete mode 100644 config/defconfig_i686-native-linuxapp-icc
 delete mode 120000 config/defconfig_ppc_64-power8-linux-gcc
 delete mode 100644 config/defconfig_ppc_64-power8-linuxapp-gcc
 delete mode 100644 config/defconfig_x86_64-native-bsdapp-clang
 delete mode 100644 config/defconfig_x86_64-native-bsdapp-gcc
 delete mode 120000 config/defconfig_x86_64-native-freebsd-clang
 delete mode 120000 config/defconfig_x86_64-native-freebsd-gcc
 delete mode 120000 config/defconfig_x86_64-native-linux-clang
 delete mode 120000 config/defconfig_x86_64-native-linux-gcc
 delete mode 120000 config/defconfig_x86_64-native-linux-icc
 delete mode 100644 config/defconfig_x86_64-native-linuxapp-clang
 delete mode 100644 config/defconfig_x86_64-native-linuxapp-gcc
 delete mode 100644 config/defconfig_x86_64-native-linuxapp-icc
 delete mode 120000 config/defconfig_x86_x32-native-linux-gcc
 delete mode 100644 config/defconfig_x86_x32-native-linuxapp-gcc
config/common_armv8a_linux deleted +0 -43
deleted file mode 100644
index e942657a0f..0000000000
@@ -1,43 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Cavium, Inc
-#
-
-#include "common_linux"
-
-CONFIG_RTE_MACHINE="armv8a"
-
-CONFIG_RTE_ARCH="arm64"
-CONFIG_RTE_ARCH_ARM64=y
-CONFIG_RTE_ARCH_64=y
-
-CONFIG_RTE_FORCE_INTRINSICS=y
-
-# Maximum available cache line size in arm64 implementations.
-# Setting to maximum available cache line size in generic config
-# to address minimum DMA alignment across all arm64 implementations.
-CONFIG_RTE_CACHE_LINE_SIZE=128
-
-CONFIG_RTE_USE_C11_MEM_MODEL=y
-
-# Accelarate rte_memcpy. Be sure to run unit test (memcpy_perf_autotest)
-# to determine the best threshold in code. Refer to notes in source file
-# (lib/librte_eal/arm/include/rte_memcpy_64.h) for more info.
-CONFIG_RTE_ARCH_ARM64_MEMCPY=n
-#CONFIG_RTE_ARM64_MEMCPY_ALIGNED_THRESHOLD=2048
-#CONFIG_RTE_ARM64_MEMCPY_UNALIGNED_THRESHOLD=512
-# Leave below RTE_ARM64_MEMCPY_xxx options commented out, unless there're
-# strong reasons.
-#CONFIG_RTE_ARM64_MEMCPY_SKIP_GCC_VER_CHECK=n
-#CONFIG_RTE_ARM64_MEMCPY_ALIGN_MASK=0xF
-#CONFIG_RTE_ARM64_MEMCPY_STRICT_ALIGN=n
-
-CONFIG_RTE_LIBRTE_IONIC_PMD=n
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
-CONFIG_RTE_LIBRTE_AVP_PMD=n
-CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n
-
-#
-# NXP PFE PMD Driver
-#
-CONFIG_RTE_LIBRTE_PFE_PMD=y
config/common_base deleted +0 -1154

1,154 lines not on this page · raw message

config/common_freebsd deleted +0 -15
deleted file mode 100644
index 456b394c4d..0000000000
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2016 Intel Corporation
-
-#include "common_base"
-
-CONFIG_RTE_EXEC_ENV="bsdapp"
-CONFIG_RTE_EXEC_ENV_BSDAPP=y
-CONFIG_RTE_EXEC_ENV_FREEBSD=y
-
-#
-# FreeBSD contiguous memory driver settings
-#
-CONFIG_RTE_CONTIGMEM_MAX_NUM_BUFS=64
-CONFIG_RTE_CONTIGMEM_DEFAULT_NUM_BUFS=2
-CONFIG_RTE_CONTIGMEM_DEFAULT_BUF_SIZE=1024*1024*1024
config/common_linux deleted +0 -68

68 lines not on this page · raw message

config/defconfig_arm-armv7a-linux-gcc deleted +0 -1
deleted file mode 120000
index 84619de43a..0000000000
@@ -1 +0,0 @@
-defconfig_arm-armv7a-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm-armv7a-linuxapp-gcc deleted +0 -49

49 lines not on this page · raw message

config/defconfig_arm64-armada-linux-gcc deleted +0 -1
deleted file mode 120000
index 64ce2a5687..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-armada-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-armada-linuxapp-gcc deleted +0 -41

41 lines not on this page · raw message

config/defconfig_arm64-armv8a-linux-clang deleted +0 -1
deleted file mode 120000
index 196808b982..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-armv8a-linuxapp-clang
\ No newline at end of file
config/defconfig_arm64-armv8a-linux-gcc deleted +0 -1
deleted file mode 120000
index 0949519562..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-armv8a-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-armv8a-linuxapp-clang deleted +0 -8
deleted file mode 100644
index d3b4dad532..0000000000
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Cavium, Inc
-#
-
-#include "common_armv8a_linux"
-
-CONFIG_RTE_TOOLCHAIN="clang"
-CONFIG_RTE_TOOLCHAIN_CLANG=y
config/defconfig_arm64-armv8a-linuxapp-gcc deleted +0 -9
deleted file mode 100644
index 58c4a4029a..0000000000
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2015 Cavium, Inc
-#
-
-#include "common_armv8a_linux"
-
-CONFIG_RTE_TOOLCHAIN="gcc"
-CONFIG_RTE_TOOLCHAIN_GCC=y
-CONFIG_RTE_MAX_LCORE=256
config/defconfig_arm64-bluefield-linux-gcc deleted +0 -1
deleted file mode 120000
index dad37d5e79..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-bluefield-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-bluefield-linuxapp-gcc deleted +0 -18
deleted file mode 100644
index b496538819..0000000000
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2019 Mellanox Technologies, Ltd
-#
-
-#include "defconfig_arm64-armv8a-linux-gcc"
-
-# Mellanox BlueField
-CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"
-
-CONFIG_RTE_MAX_NUMA_NODES=1
-CONFIG_RTE_CACHE_LINE_SIZE=64
-
-# UMA architecture
-CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
-CONFIG_RTE_LIBRTE_VHOST_NUMA=n
-
-# PMD for ConnectX-5
-CONFIG_RTE_LIBRTE_MLX5_PMD=y
config/defconfig_arm64-dpaa-linux-gcc deleted +0 -1
deleted file mode 120000
index dc05caacf3..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-dpaa-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-dpaa-linuxapp-gcc deleted +0 -31
deleted file mode 100644
index 4ae4cd8502..0000000000
@@ -1,31 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2016 Freescale Semiconductor, Inc.
-# Copyright 2017-2019 NXP
-
-#include "defconfig_arm64-armv8a-linux-gcc"
-
-# NXP (Freescale) - Soc Architecture for DPAA or DPAA2 support
-# DPAA - FMAN, QMAN & BMAN support (e.g. LS1043, LS1046)
-# DPAA2 - WRIOP and QBMAN (e.g. LS1088, LS2088, LX2160 etc)
-#
-CONFIG_RTE_MACHINE="dpaa"
-CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"
-
-#
-# Compile Environment Abstraction Layer
-#
-CONFIG_RTE_MAX_LCORE=16
-CONFIG_RTE_MAX_NUMA_NODES=1
-CONFIG_RTE_CACHE_LINE_SIZE=64
-CONFIG_RTE_PKTMBUF_HEADROOM=128
-
-# Doesn't support NUMA
-CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
-CONFIG_RTE_LIBRTE_VHOST_NUMA=n
-
-# Enable PHY mode when using VM-VFIO target
-CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
-
-# NXP DPAA Bus
-CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
config/defconfig_arm64-emag-linux-gcc deleted +0 -1
deleted file mode 120000
index 21894a31a8..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-emag-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-emag-linuxapp-gcc deleted +0 -11
deleted file mode 100644
index 1db654c899..0000000000
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Ampere Computing
-#
-
-#include "defconfig_arm64-armv8a-linux-gcc"
-
-CONFIG_RTE_MACHINE="emag"
-
-CONFIG_RTE_CACHE_LINE_SIZE=64
-CONFIG_RTE_MAX_NUMA_NODES=1
-CONFIG_RTE_MAX_LCORE=32
config/defconfig_arm64-n1sdp-linux-gcc deleted +0 -1
deleted file mode 120000
index 103bbea90f..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-n1sdp-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-n1sdp-linuxapp-gcc deleted +0 -14
deleted file mode 100644
index f9138093b5..0000000000
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Arm Ltd.
-#
-
-#include "defconfig_arm64-armv8a-linux-gcc"
-
-CONFIG_RTE_MACHINE="n1sdp"
-CONFIG_RTE_MAX_LCORE=4
-CONFIG_RTE_MAX_NUMA_NODES=1
-CONFIG_RTE_CACHE_LINE_SIZE=64
-
-# Doesn't support NUMA
-CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
-CONFIG_RTE_LIBRTE_VHOST_NUMA=n
config/defconfig_arm64-octeontx2-linux-gcc deleted +0 -1
deleted file mode 120000
index e251505311..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-octeontx2-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-octeontx2-linuxapp-gcc deleted +0 -18
deleted file mode 100644
index 0d83becf54..0000000000
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Marvell International Ltd
-#
-
-#include "defconfig_arm64-armv8a-linux-gcc"
-
-CONFIG_RTE_MACHINE="octeontx2"
-
-CONFIG_RTE_MAX_NUMA_NODES=1
-CONFIG_RTE_MAX_LCORE=36
-CONFIG_RTE_ARM_FEATURE_ATOMICS=y
-
-# Doesn't support NUMA
-CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
-CONFIG_RTE_LIBRTE_VHOST_NUMA=n
-
-# Max supported NIX LFs
-CONFIG_RTE_MAX_VFIO_GROUPS=128
config/defconfig_arm64-stingray-linux-gcc deleted +0 -1
deleted file mode 120000
index 829dd65f05..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-stingray-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-stingray-linuxapp-gcc deleted +0 -14
deleted file mode 100644
index 2a6f6cee28..0000000000
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright (C) Broadcom 2017-2018. All rights reserved.
-#
-
-#include "defconfig_arm64-armv8a-linux-gcc"
-
-# Broadcom - Stingray
-CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"
-
-# Doesn't support NUMA
-CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
-CONFIG_RTE_LIBRTE_VHOST_NUMA=n
-
-CONFIG_RTE_EAL_IGB_UIO=y
config/defconfig_arm64-thunderx-linux-gcc deleted +0 -1
deleted file mode 120000
index 1b9c4ad211..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-thunderx-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-thunderx-linuxapp-gcc deleted +0 -17
deleted file mode 100644
index 946906b67a..0000000000
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2015 Cavium, Inc
-#
-
-#include "defconfig_arm64-armv8a-linux-gcc"
-
-CONFIG_RTE_MACHINE="thunderx"
-
-CONFIG_RTE_USE_C11_MEM_MODEL=n
-CONFIG_RTE_MAX_NUMA_NODES=2
-CONFIG_RTE_MAX_LCORE=96
-CONFIG_RTE_MAX_VFIO_GROUPS=128
-
-#
-# Compile PMD for octeontx sso event device
-#
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
config/defconfig_arm64-thunderx2-linux-gcc deleted +0 -1
deleted file mode 120000
index b40a760b1d..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-thunderx2-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-thunderx2-linuxapp-gcc deleted +0 -12
deleted file mode 100644
index af4a89c480..0000000000
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Marvell International Ltd
-#
-
-#include "defconfig_arm64-armv8a-linux-gcc"
-
-CONFIG_RTE_MACHINE="thunderx2"
-
-CONFIG_RTE_CACHE_LINE_SIZE=64
-CONFIG_RTE_MAX_NUMA_NODES=2
-CONFIG_RTE_MAX_LCORE=256
-CONFIG_RTE_ARM_FEATURE_ATOMICS=y
config/defconfig_arm64-xgene1-linux-gcc deleted +0 -1
deleted file mode 120000
index d5e8b5e550..0000000000
@@ -1 +0,0 @@
-defconfig_arm64-xgene1-linuxapp-gcc
\ No newline at end of file
config/defconfig_arm64-xgene1-linuxapp-gcc deleted +0 -8
deleted file mode 100644
index fbf576c4aa..0000000000
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2015 Cavium, Inc
-#
-
-#include "defconfig_arm64-armv8a-linux-gcc"
-
-CONFIG_RTE_MACHINE="xgene1"
-CONFIG_RTE_CACHE_LINE_SIZE=64
config/defconfig_i686-native-linux-gcc deleted +0 -1
deleted file mode 120000
index 927141d5dd..0000000000
@@ -1 +0,0 @@
-defconfig_i686-native-linuxapp-gcc
\ No newline at end of file
config/defconfig_i686-native-linux-icc deleted +0 -1
deleted file mode 120000
index e6a466b3e3..0000000000
@@ -1 +0,0 @@
-defconfig_i686-native-linuxapp-icc
\ No newline at end of file
config/defconfig_i686-native-linuxapp-gcc deleted +0 -66

66 lines not on this page · raw message

config/defconfig_i686-native-linuxapp-icc deleted +0 -66

66 lines not on this page · raw message

config/defconfig_ppc_64-power8-linux-gcc deleted +0 -1
deleted file mode 120000
index 580c92e12e..0000000000
@@ -1 +0,0 @@
-defconfig_ppc_64-power8-linuxapp-gcc
\ No newline at end of file
config/defconfig_ppc_64-power8-linuxapp-gcc deleted +0 -35
deleted file mode 100644
index c917c47746..0000000000
@@ -1,35 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright (C) IBM Corporation 2014.
-
-#include "common_linux"
-
-CONFIG_RTE_MACHINE="power8"
-
-CONFIG_RTE_ARCH="ppc_64"
-CONFIG_RTE_ARCH_PPC_64=y
-CONFIG_RTE_ARCH_64=y
-
-CONFIG_RTE_MAX_LCORE=1536
-CONFIG_RTE_MAX_NUMA_NODES=32
-CONFIG_RTE_CACHE_LINE_SIZE=128
-
-CONFIG_RTE_TOOLCHAIN="gcc"
-CONFIG_RTE_TOOLCHAIN_GCC=y
-
-# Note: Power doesn't have this support
-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
-
-# Note: Initially, all of the PMD drivers compilation are turned off on Power
-# Will turn on them only after the successful testing on Power
-CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n
-CONFIG_RTE_LIBRTE_IXGBE_PMD=n
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
-CONFIG_RTE_LIBRTE_ENIC_PMD=n
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
-CONFIG_RTE_LIBRTE_AVP_PMD=n
-CONFIG_RTE_LIBRTE_HINIC_PMD=n
-CONFIG_RTE_LIBRTE_HNS3_PMD=n
-CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n
-CONFIG_RTE_LIBRTE_IONIC_PMD=n
config/defconfig_x86_64-native-bsdapp-clang deleted +0 -14
deleted file mode 100644
index 7204738e14..0000000000
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-#include "common_freebsd"
-
-CONFIG_RTE_MACHINE="native"
-
-CONFIG_RTE_ARCH="x86_64"
-CONFIG_RTE_ARCH_X86_64=y
-CONFIG_RTE_ARCH_X86=y
-CONFIG_RTE_ARCH_64=y
-
-CONFIG_RTE_TOOLCHAIN="clang"
-CONFIG_RTE_TOOLCHAIN_CLANG=y
config/defconfig_x86_64-native-bsdapp-gcc deleted +0 -14
deleted file mode 100644
index b24e2e6d5a..0000000000
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-#include "common_freebsd"
-
-CONFIG_RTE_MACHINE="native"
-
-CONFIG_RTE_ARCH="x86_64"
-CONFIG_RTE_ARCH_X86_64=y
-CONFIG_RTE_ARCH_X86=y
-CONFIG_RTE_ARCH_64=y
-
-CONFIG_RTE_TOOLCHAIN="gcc"
-CONFIG_RTE_TOOLCHAIN_GCC=y
config/defconfig_x86_64-native-freebsd-clang deleted +0 -1
deleted file mode 120000
index 76115fd5a6..0000000000
@@ -1 +0,0 @@
-defconfig_x86_64-native-bsdapp-clang
\ No newline at end of file
config/defconfig_x86_64-native-freebsd-gcc deleted +0 -1
deleted file mode 120000
index 72dd4b44be..0000000000
@@ -1 +0,0 @@
-defconfig_x86_64-native-bsdapp-gcc
\ No newline at end of file
config/defconfig_x86_64-native-linux-clang deleted +0 -1
deleted file mode 120000
index 3bcf89d6a4..0000000000
@@ -1 +0,0 @@
-defconfig_x86_64-native-linuxapp-clang
\ No newline at end of file
config/defconfig_x86_64-native-linux-gcc deleted +0 -1
deleted file mode 120000
index d707965941..0000000000
@@ -1 +0,0 @@
-defconfig_x86_64-native-linuxapp-gcc
\ No newline at end of file
config/defconfig_x86_64-native-linux-icc deleted +0 -1
deleted file mode 120000
index a36b47131a..0000000000
@@ -1 +0,0 @@
-defconfig_x86_64-native-linuxapp-icc
\ No newline at end of file
config/defconfig_x86_64-native-linuxapp-clang deleted +0 -14
deleted file mode 100644
index 7508c0f2da..0000000000
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-#include "common_linux"
-
-CONFIG_RTE_MACHINE="native"
-
-CONFIG_RTE_ARCH="x86_64"
-CONFIG_RTE_ARCH_X86_64=y
-CONFIG_RTE_ARCH_X86=y
-CONFIG_RTE_ARCH_64=y
-
-CONFIG_RTE_TOOLCHAIN="clang"
-CONFIG_RTE_TOOLCHAIN_CLANG=y
config/defconfig_x86_64-native-linuxapp-gcc deleted +0 -14
deleted file mode 100644
index db67066a57..0000000000
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-#include "common_linux"
-
-CONFIG_RTE_MACHINE="native"
-
-CONFIG_RTE_ARCH="x86_64"
-CONFIG_RTE_ARCH_X86_64=y
-CONFIG_RTE_ARCH_X86=y
-CONFIG_RTE_ARCH_64=y
-
-CONFIG_RTE_TOOLCHAIN="gcc"
-CONFIG_RTE_TOOLCHAIN_GCC=y
config/defconfig_x86_64-native-linuxapp-icc deleted +0 -29
deleted file mode 100644
index 8aa7af7e20..0000000000
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-#include "common_linux"
-
-CONFIG_RTE_MACHINE="native"
-
-CONFIG_RTE_ARCH="x86_64"
-CONFIG_RTE_ARCH_X86_64=y
-CONFIG_RTE_ARCH_X86=y
-CONFIG_RTE_ARCH_64=y
-
-CONFIG_RTE_TOOLCHAIN="icc"
-CONFIG_RTE_TOOLCHAIN_ICC=y
-
-#
-# Solarflare PMD build is not supported using icc toolchain
-#
-CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
-
-#
-# HINIC PMD build is not supported using icc toolchain
-#
-CONFIG_RTE_LIBRTE_HINIC_PMD=n
-
-#
-# HNS3 PMD build is not supported using icc toolchain
-#
-CONFIG_RTE_LIBRTE_HNS3_PMD=n
config/defconfig_x86_x32-native-linux-gcc deleted +0 -1
deleted file mode 120000
index 7ea00cecb3..0000000000
@@ -1 +0,0 @@
-defconfig_x86_x32-native-linuxapp-gcc
\ No newline at end of file
config/defconfig_x86_x32-native-linuxapp-gcc deleted +0 -46

46 lines not on this page · raw message

Signature · 1 line
2.17.1
#121 lore raw

PATCH v3 12/37 examples: remove old build system references

In reply to Ciara Power

Remove the references to RTE_SDK and RTE_TARGET environment variables from the build instructions in the comments of the various BPF files, and in the ipsec-secgw common definition script.

---
 examples/bpf/t2.c                        |  6 ++++--
 examples/bpf/t3.c                        | 10 ++++++----
 examples/ipsec-secgw/test/common_defs.sh |  4 ++--
 3 files changed, 12 insertions(+), 8 deletions(-)
examples/bpf/t2.c +4 -2
index 9878eaf7bd..b9bce746c0 100644
@@ -9,8 +9,10 @@
  * (PKT_RX_VLAN_PKT | PKT_RX_VLAN_STRIPPED).
  * Doesn't touch contents of packet data.
  * To compile:
- * clang -O2 -I${RTE_SDK}/${RTE_TARGET}/include \
- * -target bpf -Wno-int-to-void-pointer-cast -c t2.c
+ * clang -O2 -target bpf -Wno-int-to-void-pointer-cast -c t2.c
+ *
+ * NOTE: if DPDK is not installed system-wide, add compiler flag with path
+ * to DPDK rte_mbuf.h file, e.g. "clang -I/path/to/dpdk/headers -O2 ..."
  */
 
 #include <stdint.h>
examples/bpf/t3.c +6 -4
index f58ff64b3b..66faf80cc5 100644
@@ -8,13 +8,15 @@
  * Dump the mbuf into stdout if it is an ARP packet (aka tcpdump 'arp').
  *
  * To compile on x86:
- * clang -O2 -U __GNUC__ -I${RTE_SDK}/${RTE_TARGET}/include \
- * -target bpf -Wno-int-to-void-pointer-cast -c t3.c
+ * clang -O2 -U __GNUC__ -target bpf -Wno-int-to-void-pointer-cast -c t3.c
  *
  * To compile on ARM:
- * clang -O2 -I/usr/include/aarch64-linux-gnu \
- * -I${RTE_SDK}/${RTE_TARGET}/include -target bpf \
+ * clang -O2 -I/usr/include/aarch64-linux-gnu -target bpf \
  * -Wno-int-to-void-pointer-cast -c t3.c
+ *
+ * NOTE: if DPDK is not installed system-wide, add compiler flag with path
+ * to DPDK rte_mbuf.h file to above commands,
+ * e.g. "clang -I/path/to/dpdk/headers -O2 ..."
  */
 
 #include <stdint.h>
examples/ipsec-secgw/test/common_defs.sh +2 -2
index df680805b8..f22eb3ab12 100644
@@ -34,8 +34,8 @@ LOCAL_IPV4=192.168.31.92
 REMOTE_IPV6=fd12:3456:789a:0031:0000:0000:0000:0014
 LOCAL_IPV6=fd12:3456:789a:0031:0000:0000:0000:0092
 
-DPDK_PATH=${RTE_SDK:-${PWD}}
-DPDK_BUILD=${RTE_TARGET:-x86_64-native-linux-gcc}
+DPDK_PATH=${PWD}
+DPDK_BUILD="build"
 DPDK_VARS=""
 
 # by default ipsec-secgw can't deal with multi-segment packets
Signature · 1 line
2.17.1
#122 lore raw

PATCH v3 13/37 buildtools: remove all scripts for use with make

In reply to Ciara Power

Make is no longer supported for compiling DPDK, scripts used with make are no longer needed.

---
 MAINTAINERS                 |   4 --
 buildtools/auto-config-h.sh | 108 ------------------------------------
 buildtools/gen-build-mk.sh  |  23 --------
 buildtools/gen-config-h.sh  |  15 -----
 buildtools/relpath.sh       |  76 -------------------------
 5 files changed, 226 deletions(-)
 delete mode 100755 buildtools/auto-config-h.sh
 delete mode 100755 buildtools/gen-build-mk.sh
 delete mode 100755 buildtools/gen-config-h.sh
 delete mode 100755 buildtools/relpath.sh
MAINTAINERS +0 -4
index ccaecabea0..392150fc3b 100644
@@ -102,10 +102,6 @@ Build System
 M: Thomas Monjalon <[email protected]>
 F: Makefile
 F: config/
-F: buildtools/auto-config-h.sh
-F: buildtools/gen-build-mk.sh
-F: buildtools/gen-config-h.sh
-F: buildtools/relpath.sh
 F: doc/build-sdk-quick.txt
 F: doc/guides/prog_guide/build_app.rst
 F: doc/guides/prog_guide/dev_kit_*
buildtools/auto-config-h.sh deleted +0 -108

108 lines not on this page · raw message

buildtools/gen-build-mk.sh deleted +0 -23
deleted file mode 100755
index 636920b638..0000000000
@@ -1,23 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-# Auto-generate a Makefile in build directory
-# Args:
-#   $1: path of project src root
-
-echo "# Automatically generated by gen-build-mk.sh"
-echo
-echo "ifdef O"
-echo "ifeq (\"\$(origin O)\", \"command line\")"
-echo "\$(error \"Cannot specify O= as you are already in a build directory\")"
-echo "endif"
-echo "endif"
-echo
-echo "MAKEFLAGS += --no-print-directory"
-echo
-echo "all:"
-echo "	@\$(MAKE) -C $1 O=\$(CURDIR)"
-echo
-echo "%::"
-echo "	@\$(MAKE) -C $1 O=\$(CURDIR) \$@"
buildtools/gen-config-h.sh deleted +0 -15
deleted file mode 100755
index a8c2006339..0000000000
@@ -1,15 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-echo "#ifndef __RTE_CONFIG_H"
-echo "#define __RTE_CONFIG_H"
-grep CONFIG_ $1 |
-grep -v '^[ \t]*#' |
-sed 's,CONFIG_\(.*\)=y.*$,#undef \1\
-#define \1 1,' |
-sed 's,CONFIG_\(.*\)=n.*$,#undef \1,' |
-sed 's,CONFIG_\(.*\)=\(.*\)$,#undef \1\
-#define \1 \2,' |
-sed 's,\# CONFIG_\(.*\) is not set$,#undef \1,'
-echo "#endif /* __RTE_CONFIG_H */"
buildtools/relpath.sh deleted +0 -76

76 lines not on this page · raw message

Signature · 1 line
2.17.1
#123 lore raw

PATCH v3 14/37 devtools: remove use of make in scripts

In reply to Ciara Power

Make is no longer supported, the test script for make builds is no longer required. Uses of make in other tool scripts are replaced.

---
 MAINTAINERS                |   1 -
 devtools/build-tags.sh     |  14 +-
 devtools/check-includes.sh |   3 +-
 devtools/git-log-fixes.sh  |   2 +-
 devtools/test-build.sh     | 315 -------------------------------------
 5 files changed, 4 insertions(+), 331 deletions(-)
 delete mode 100755 devtools/test-build.sh
MAINTAINERS +0 -1
index 392150fc3b..0fec96558e 100644
@@ -90,7 +90,6 @@ F: devtools/checkpatches.sh
 F: devtools/get-maintainer.sh
 F: devtools/git-log-fixes.sh
 F: devtools/load-devel-config
-F: devtools/test-build.sh
 F: devtools/test-meson-builds.sh
 F: devtools/words-case.txt
 F: license/
devtools/build-tags.sh +2 -12
index 276fff647b..614ce4c3a4 100755
@@ -19,8 +19,8 @@ arm_64=true
 print_usage()
 {
 	echo "Usage: $(basename $0) [-h] [-v] tags|cscope|gtags|etags [config]"
-	echo "Valid configs are:"
-	make showconfigs | sed 's,^,\t,'
+	echo "Examples of valid configs are: "
+	echo "x86_64-native-linux-gcc, arm64-armv8a-linux-gcc, ppc_64-power8-linux-gcc"
 }
 
 # Move to the root of the git tree
@@ -125,17 +125,7 @@ ppc_64_sources()
 	find_sources "$source_dirs" '*altivec*.[chS]'
 }
 
-check_valid_target()
-{
-	if [ ! -f "config/defconfig_$1" ] ; then
-		echo "Invalid config: $1"
-		print_usage
-		exit 0
-	fi
-}
-
 if [ -n "$2" ]; then
-	check_valid_target $2
 
 	echo $2 | grep -q "linux" || linux=false
 	echo $2 | grep -q "bsd" || bsd=false
devtools/check-includes.sh +1 -2
index 749b9b26d2..15594f08a3 100755
@@ -17,8 +17,7 @@
 #
 # SUMMARY=1 is the same as -s.
 #
-# CC, CPPFLAGS, CFLAGS, EXTRA_CPPFLAGS, EXTRA_CFLAGS, CXX, CXXFLAGS and
-# EXTRA_CXXFLAGS are taken into account.
+# CC, CPPFLAGS, CFLAGS, CXX, CXXFLAGS are taken into account.
 #
 # PEDANTIC_CFLAGS, PEDANTIC_CXXFLAGS and PEDANTIC_CPPFLAGS provide strict
 # C/C++ compilation flags.
devtools/git-log-fixes.sh +1 -1
index 6d468d6731..210c8dcf25 100755
@@ -50,7 +50,7 @@ commit_version () # <hash>
 		head -n1)
 	if [ -z "$tag" ] ; then
 		# before -rc1 tag of release in progress
-		make showversion | cut -d'.' -f-2
+		cat VERSION | cut -d'.' -f-2
 	else
 		echo $tag | sed 's,^v,,' | sed 's,-rc.*,,'
 	fi
devtools/test-build.sh deleted +0 -315

315 lines not on this page · raw message

Signature · 1 line
2.17.1
#124 lore raw

Re: [dpdk-dev] [PATCH v3 14/37] devtools: remove use of make in scripts

Quoted 2 lines · Ciara Power
devtools/build-tags.sh +0 -0

[...]

Quoted 3 lines

+ echo "Examples of valid configs are: "
+ echo "x86_64-native-linux-gcc, arm64-armv8a-linux-gcc, ppc_64-power8-linux-gcc"

Only arch and OS are used in this script.
I would give these simpler examples:

	x86_64-bsd, arm64-linux, ppc_64-linux

[...]

devtools/check-includes.sh line 20

Quoted 9 lines
devtools/check-includes.sh +1 -2
@@ -17,8 +17,7 @@
 #
 # SUMMARY=1 is the same as -s.
 #
-# CC, CPPFLAGS, CFLAGS, EXTRA_CPPFLAGS, EXTRA_CFLAGS, CXX, CXXFLAGS and
-# EXTRA_CXXFLAGS are taken into account.
+# CC, CPPFLAGS, CFLAGS, CXX, CXXFLAGS are taken into account.

The comment is changed but not the script.

#125 lore raw

PATCH v3 15/37 app/test: remove references to make

In reply to Ciara Power

Make is no longer supported, RTE_SDK, RTE_TARGET and CONFIG options are no longer in use.

---
 app/test-bbdev/test-bbdev.py   | 11 +----
 app/test/test_cryptodev.c      | 89 +++++++++-------------------------
 app/test/test_cryptodev_asym.c | 18 ++-----
 3 files changed, 28 insertions(+), 90 deletions(-)
app/test-bbdev/test-bbdev.py +2 -9
index 5ae2dc6c49..bfd8a4dcc8 100755
@@ -20,15 +20,8 @@ def kill(process):
     print("WARNING: Python 2 is deprecated for use in DPDK, and will not work in future releases.", file=sys.stderr)
     print("Please use Python 3 instead", file=sys.stderr)
 
-if "RTE_SDK" in os.environ:
-    dpdk_path = os.environ["RTE_SDK"]
-else:
-    dpdk_path = "../.."
-
-if "RTE_TARGET" in os.environ:
-    dpdk_target = os.environ["RTE_TARGET"]
-else:
-    dpdk_target = "x86_64-native-linux-gcc"
+dpdk_path = "../.."
+dpdk_target = "build"
 
 parser = argparse.ArgumentParser(
                     description='BBdev Unit Test Application',
app/test/test_cryptodev.c +22 -67

220 lines not on this page · raw message

app/test/test_cryptodev_asym.c +4 -14
index dc62ed7bf3..85cd076059 100644
@@ -2336,9 +2336,7 @@ test_cryptodev_openssl_asym(void)
 			RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "OPENSSL PMD must be loaded. Check if "
-				"CONFIG_RTE_LIBRTE_PMD_OPENSSL is enabled "
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "OPENSSL PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
 
@@ -2352,9 +2350,7 @@ test_cryptodev_qat_asym(void)
 			RTE_STR(CRYPTODEV_NAME_QAT_ASYM_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check if "
-				    "CONFIG_RTE_LIBRTE_PMD_QAT_ASYM is enabled "
-				    "in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "QAT PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
 
@@ -2367,10 +2363,7 @@ test_cryptodev_octeontx_asym(void)
 	gbl_driver_id = rte_cryptodev_driver_id_get(
 			RTE_STR(CRYPTODEV_NAME_OCTEONTX_SYM_PMD));
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "OCTEONTX PMD must be loaded. Check if "
-				"CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO is "
-				"enabled in config file to run this "
-				"testsuite.\n");
+		RTE_LOG(ERR, USER1, "OCTEONTX PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
 	return unit_test_suite_runner(&cryptodev_octeontx_asym_testsuite);
@@ -2382,10 +2375,7 @@ test_cryptodev_octeontx2_asym(void)
 	gbl_driver_id = rte_cryptodev_driver_id_get(
 			RTE_STR(CRYPTODEV_NAME_OCTEONTX2_PMD));
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "OCTEONTX2 PMD must be loaded. Check if "
-				"CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO is "
-				"enabled in config file to run this "
-				"testsuite.\n");
+		RTE_LOG(ERR, USER1, "OCTEONTX2 PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
 
Signature · 1 line
2.17.1
#126 lore raw

Re: [dpdk-dev] [PATCH v3 15/37] app/test: remove references to make

Hi Ciara,

Quoted 23 lines

From: Power, Ciara <[email protected]>

Make is no longer supported, RTE_SDK, RTE_TARGET and CONFIG options are no longer in use.

---
 app/test-bbdev/test-bbdev.py   | 11 +----
 app/test/test_cryptodev.c      | 89 +++++++++-------------------------
 app/test/test_cryptodev_asym.c | 18 ++-----
 3 files changed, 28 insertions(+), 90 deletions(-)
app/test-bbdev/test-bbdev.py index renamed from app/test-bbdev/test-bbdev.py +0 -0

5ae2dc6c49..bfd8a4dcc8 100755

app/test-bbdev/test-bbdev.py +0 -2
@@ -20,15 +20,8 @@ def kill(process):
     print("WARNING: Python 2 is deprecated for use in DPDK, and will not work
 in future releases.", file=sys.stderr)
     print("Please use Python 3 instead", file=sys.stderr)
 
-if "RTE_SDK" in os.environ:
-    dpdk_path = os.environ["RTE_SDK"]

app/test-bbdev/test-bbdev.py def kill(process): · line 26

Quoted 10 lines
app/test-bbdev/test-bbdev.py +2 -7
-else:
-    dpdk_path = "../.."
-
-if "RTE_TARGET" in os.environ:
-    dpdk_target = os.environ["RTE_TARGET"]
-else:
-    dpdk_target = "x86_64-native-linux-gcc"
+dpdk_path = "../.."
+dpdk_target = "build"
 

I am okay with adding the assumption that DPDK staged build location is "build" since that assumptions exists already somewhere else but then we probably need one line in the test-bbdev .rst to capture that new assumption.
Also I believe that not only that path but the binary name is now different with meson as well. I see the binary name with meson is "dpdk-test-bbdev" instead of "testbbdev" that we used to have so far with make (let me know if I am missing something, I was expecting the move to meson to be more seamless). So there is another line to be changed here in the same script a couple of lines below to be able to run the tests :
- default=dpdk_path + "/" + dpdk_target + "/app/testbbdev")
+ default=dpdk_path + "/" + dpdk_target + "/app/dpdk-test-bbdev")

Thanks, let me know if I can help
Nic

Quoted 355 lines
app/test-bbdev/test-bbdev.py +0 -0
 parser = argparse.ArgumentParser(
                     description='BBdev Unit Test Application', diff --git

a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c index 70bf6fe2c1..153d001194 100644

app/test/test_cryptodev.c +0 -1
@@ -12688,9 +12688,7 @@ test_cryptodev_qat(void /*argv __rte_unused, int
 argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check that

both "

app/test/test_cryptodev.c +0 -1
-		"CONFIG_RTE_LIBRTE_PMD_QAT and

CONFIG_RTE_LIBRTE_PMD_QAT_SYM "

app/test/test_cryptodev.c +1 -3
-		"are enabled in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "QAT PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12704,9 +12702,7 @@ test_cryptodev_virtio(void /*argv __rte_unused,
 int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_VIRTIO_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "VIRTIO PMD must be loaded. Check if "
-				"CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO

is enabled "

app/test/test_cryptodev.c +1 -2
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "VIRTIO PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
@@ -12720,9 +12716,7 @@ test_cryptodev_aesni_mb(void /*argv
 __rte_unused, int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "AESNI MB PMD must be loaded. Check

if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_AESNI_MB is

enabled "

app/test/test_cryptodev.c +1 -2
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "AESNI MB PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12739,9 +12733,7 @@ test_cryptodev_cpu_aesni_mb(void)
 			RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "AESNI MB PMD must be loaded. Check

if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_AESNI_MB is

enabled "

app/test/test_cryptodev.c +1 -2
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "AESNI MB PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12759,9 +12751,7 @@ test_cryptodev_openssl(void)
 			RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "OPENSSL PMD must be loaded. Check

if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_OPENSSL is

enabled "

app/test/test_cryptodev.c +1 -2
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "OPENSSL PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12775,9 +12765,7 @@ test_cryptodev_aesni_gcm(void)
 			RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "AESNI GCM PMD must be loaded.

Check if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_AESNI_GCM is

enabled "

app/test/test_cryptodev.c +1 -2
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "AESNI GCM PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12794,9 +12782,7 @@ test_cryptodev_cpu_aesni_gcm(void)
 			RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "AESNI GCM PMD must be loaded.

Check if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_AESNI_GCM is

enabled "

app/test/test_cryptodev.c +2 -5
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "AESNI GCM PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12814,9 +12800,7 @@ test_cryptodev_null(void)
 			RTE_STR(CRYPTODEV_NAME_NULL_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "NULL PMD must be loaded. Check if "
-				"CONFIG_RTE_LIBRTE_PMD_NULL is enabled "
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "NULL PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
 
@@ -12830,9 +12814,7 @@ test_cryptodev_sw_snow3g(void /*argv
 __rte_unused, int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "SNOW3G PMD must be loaded. Check

if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_SNOW3G is

enabled "

app/test/test_cryptodev.c +1 -3
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "SNOW3G PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12846,9 +12828,7 @@ test_cryptodev_sw_kasumi(void /*argv
 __rte_unused, int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_KASUMI_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "ZUC PMD must be loaded. Check if "
-				"CONFIG_RTE_LIBRTE_PMD_KASUMI is

enabled "

app/test/test_cryptodev.c +2 -5
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "ZUC PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12862,9 +12842,7 @@ test_cryptodev_sw_zuc(void /*argv __rte_unused,
 int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_ZUC_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "ZUC PMD must be loaded. Check if "
-				"CONFIG_RTE_LIBRTE_PMD_ZUC is enabled "
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "ZUC PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12878,9 +12856,7 @@ test_cryptodev_armv8(void)
 			RTE_STR(CRYPTODEV_NAME_ARMV8_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "ARMV8 PMD must be loaded. Check if

"

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_ARMV8 is

enabled "

app/test/test_cryptodev.c +1 -2
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "ARMV8 PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12894,9 +12870,7 @@ test_cryptodev_mrvl(void)
 			RTE_STR(CRYPTODEV_NAME_MVSAM_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "MVSAM PMD must be loaded. Check if

"

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO

is enabled "

app/test/test_cryptodev.c +1 -2
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "MVSAM PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12912,16 +12886,13 @@ test_cryptodev_scheduler(void /*argv
 __rte_unused, int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "SCHEDULER PMD must be loaded.

Check if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_SCHEDULER is

enabled "

app/test/test_cryptodev.c +1 -1
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "SCHEDULER PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
 
 	if (rte_cryptodev_driver_id_get(
	RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)) == -1) {
app/test/test_cryptodev.c +0 -1
-		RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB

must be"

app/test/test_cryptodev.c +1 -2
-			" enabled in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "AESNI MB PMD must be loaded.\n");
 		return TEST_SKIPPED;
 }
 	return unit_test_suite_runner(&cryptodev_scheduler_testsuite);
@@ -12938,9 +12909,7 @@ test_cryptodev_dpaa2_sec(void /*argv
 __rte_unused, int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "DPAA2 SEC PMD must be loaded.

Check if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC is

enabled "

app/test/test_cryptodev.c +1 -2
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "DPAA2 SEC PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12954,9 +12923,7 @@ test_cryptodev_dpaa_sec(void /*argv
 __rte_unused, int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_DPAA_SEC_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "DPAA SEC PMD must be loaded. Check

if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_DPAA_SEC is

enabled "

app/test/test_cryptodev.c +2 -5
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "DPAA SEC PMD must be loaded.\n");
 		return TEST_SKIPPED;
 	}
@@ -12970,9 +12937,7 @@ test_cryptodev_ccp(void)
 			RTE_STR(CRYPTODEV_NAME_CCP_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "CCP PMD must be loaded. Check if "
-				"CONFIG_RTE_LIBRTE_PMD_CCP is enabled "
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "CCP PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
 
@@ -12985,10 +12950,7 @@ test_cryptodev_octeontx(void)
 	gbl_driver_id =	rte_cryptodev_driver_id_get(
 
 	RTE_STR(CRYPTODEV_NAME_OCTEONTX_SYM_PMD));
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "OCTEONTX PMD must be loaded.

Check if "
-
"CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO is "

app/test/test_cryptodev.c +1 -3
-				"enabled in config file to run this "
-				"testsuite.\n");
+		RTE_LOG(ERR, USER1, "OCTEONTX PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
 	return unit_test_suite_runner(&cryptodev_testsuite);
@@ -13000,10 +12962,7 @@ test_cryptodev_octeontx2(void)
 	gbl_driver_id =	rte_cryptodev_driver_id_get(
 			RTE_STR(CRYPTODEV_NAME_OCTEONTX2_PMD));
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "OCTEON TX2 PMD must be loaded.

Check if "
-
"CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO is "

app/test/test_cryptodev.c +1 -2
-				"enabled in config file to run this "
-				"testsuite.\n");
+		RTE_LOG(ERR, USER1, "OCTEON TX2 PMD must be

loaded.\n");

app/test/test_cryptodev.c +0 -1
 		return TEST_FAILED;
 	}
 	return unit_test_suite_runner(&cryptodev_testsuite);
@@ -13016,9 +12975,7 @@ test_cryptodev_caam_jr(void /*argv
 __rte_unused, int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_CAAM_JR_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "CAAM_JR PMD must be loaded. Check

if "

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_CAAM_JR is

enabled "

app/test/test_cryptodev.c +1 -2
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "CAAM_JR PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
@@ -13032,9 +12989,7 @@ test_cryptodev_nitrox(void)
 			RTE_STR(CRYPTODEV_NAME_NITROX_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "NITROX PMD must be loaded. Check if

"

app/test/test_cryptodev.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_NITROX is

enabled "

app/test/test_cryptodev.c +1 -1
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "NITROX PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
app/test/test_cryptodev_asym.c +0 -1
index dc62ed7bf3..85cd076059 100644
@@ -2336,9 +2336,7 @@ test_cryptodev_openssl_asym(void)
 			RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "OPENSSL PMD must be loaded. Check

if "

app/test/test_cryptodev_asym.c +0 -1
-				"CONFIG_RTE_LIBRTE_PMD_OPENSSL is

enabled "

app/test/test_cryptodev_asym.c +1 -3
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "OPENSSL PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
@@ -2352,9 +2350,7 @@ test_cryptodev_qat_asym(void)
 			RTE_STR(CRYPTODEV_NAME_QAT_ASYM_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check if "
-				    "CONFIG_RTE_LIBRTE_PMD_QAT_ASYM is

enabled "

app/test/test_cryptodev_asym.c +1 -2
-				    "in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "QAT PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
@@ -2367,10 +2363,7 @@ test_cryptodev_octeontx_asym(void)
 	gbl_driver_id = rte_cryptodev_driver_id_get(
 
 	RTE_STR(CRYPTODEV_NAME_OCTEONTX_SYM_PMD));
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "OCTEONTX PMD must be loaded.

Check if "
-
"CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO is "

app/test/test_cryptodev_asym.c +1 -3
-				"enabled in config file to run this "
-				"testsuite.\n");
+		RTE_LOG(ERR, USER1, "OCTEONTX PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
 	return unit_test_suite_runner(&cryptodev_octeontx_asym_testsuite);
@@ -2382,10 +2375,7 @@ test_cryptodev_octeontx2_asym(void)
 	gbl_driver_id = rte_cryptodev_driver_id_get(
 			RTE_STR(CRYPTODEV_NAME_OCTEONTX2_PMD));
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "OCTEONTX2 PMD must be loaded.

Check if "
-
"CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO is "

app/test/test_cryptodev_asym.c +1 -3
-				"enabled in config file to run this "
-				"testsuite.\n");
+		RTE_LOG(ERR, USER1, "OCTEONTX2 PMD must be loaded.\n");
 		return TEST_FAILED;
 	}
 
--

2.17.1

#127 lore raw

PATCH v3 16/37 drivers: remove references to make config options

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in code comments.

---
 drivers/bus/pci/linux/pci_vfio.c | 1 -
 drivers/net/i40e/i40e_rxtx.c     | 1 -
 2 files changed, 2 deletions(-)
drivers/bus/pci/linux/pci_vfio.c +0 -1
index 07e072e13f..c15ed3bade 100644
@@ -34,7 +34,6 @@
  * This code tries to determine if the PCI device is bound to VFIO driver,
  * and initialize it (map BARs, set up interrupts) if that's the case.
  *
- * This file is only compiled if CONFIG_RTE_EAL_VFIO is set to "y".
  */
 
 #ifdef VFIO_PRESENT
drivers/net/i40e/i40e_rxtx.c +0 -1
index fe7f9200c1..60b33d20a1 100644
@@ -3438,7 +3438,6 @@ i40e_set_default_pctype_table(struct rte_eth_dev *dev)
 }
 
 #ifndef RTE_LIBRTE_I40E_INC_VECTOR
-/* Stubs needed for linkage when CONFIG_RTE_LIBRTE_I40E_INC_VECTOR is set to 'n' */
 int
 i40e_rx_vec_dev_conf_condition_check(struct rte_eth_dev __rte_unused *dev)
 {
Signature · 1 line
2.17.1
#128 lore raw

Re: [dpdk-dev] [PATCH v3 16/37] drivers: remove references to make config options

Quoted 2 lines · Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in code comments.

It should be squashed with the patch removing the config options.

In general, I feel this patchset would benefit a bit more squashing.

#129 lore raw

Re: [dpdk-dev] [PATCH v3 16/37] drivers: remove references to make config options

Quoted 7 lines · Thomas Monjalon
Quoted 2 lines · Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in code comments.

It should be squashed with the patch removing the config options.

In general, I feel this patchset would benefit a bit more squashing.

Yes, but that makes it harder to review and work with. For example, for removing the config options each document needs to be modified to remove references to those, and once make itself is removed again all docs need to be modified. To review properly, the doc needs to be scanned to check no references, especially indirect references, are missed. Given that e.g. the NIC guide doc is 55 chapters, that's a whole lot of reviewing you want to minimize, so having all changes to that one doc in one patch is much more feasible.

Really, removing the whole build system could all be done in one patch, as removing parts a bit at a time doesn't really make sense as it's all broken once one part is gone. However, the resulting patch would be enormous, so I suggest keeping the parts separate for review and then squash on merge if so desired.

/Bruce

#130 lore raw

Re: [dpdk-dev] [PATCH v3 16/37] drivers: remove references to make config options

07/09/2020 10:18, Bruce Richardson:

Quoted 18 lines · Thomas Monjalon
Quoted 7 lines · Ciara Power
Quoted 2 lines

Make is no longer supported for compiling DPDK, references are now removed in code comments.

It should be squashed with the patch removing the config options.

In general, I feel this patchset would benefit a bit more squashing.

Yes, but that makes it harder to review and work with. For example, for removing the config options each document needs to be modified to remove references to those, and once make itself is removed again all docs need to be modified. To review properly, the doc needs to be scanned to check no references, especially indirect references, are missed. Given that e.g. the NIC guide doc is 55 chapters, that's a whole lot of reviewing you want to minimize, so having all changes to that one doc in one patch is much more feasible.

Quoted 5 lines

Really, removing the whole build system could all be done in one patch, as removing parts a bit at a time doesn't really make sense as it's all broken once one part is gone. However, the resulting patch would be enormous, so I suggest keeping the parts separate for review and then squash on merge if so desired.

I will keep doc patches separate because it's too big and requires more reviews. The separation between makefiles and configs is also fine.

#131 lore raw

PATCH v3 17/37 lib: remove references to make config options

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in code comments.

---
 lib/librte_mempool/rte_mempool.h | 2 +-
 lib/librte_ring/rte_ring_elem.h  | 3 +--
 2 files changed, 2 insertions(+), 3 deletions(-)
lib/librte_mempool/rte_mempool.h +1 -1
index 9e0ee052b3..6ad7e31170 100644
@@ -970,7 +970,7 @@ typedef void (rte_mempool_ctor_t)(struct rte_mempool *, void *);
  *   If cache_size is non-zero, the rte_mempool library will try to
  *   limit the accesses to the common lockless pool, by maintaining a
  *   per-lcore object cache. This argument must be lower or equal to
- *   CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE and n / 1.5. It is advised to choose
+ *   RTE_MEMPOOL_CACHE_MAX_SIZE and n / 1.5. It is advised to choose
  *   cache_size to have "n modulo cache_size == 0": if this is
  *   not the case, some elements will always stay in the pool and will
  *   never be used. The access to the per-lcore table is of course
lib/librte_ring/rte_ring_elem.h +1 -2
index 69dc51746c..938b398fc0 100644
@@ -373,8 +373,7 @@ __rte_ring_dequeue_elems(struct rte_ring *r, uint32_t cons_head,
  * (powerpc/arm).
  * There are 2 choices for the users
  * 1.use rmb() memory barrier
- * 2.use one-direction load_acquire/store_release barrier,defined by
- * CONFIG_RTE_USE_C11_MEM_MODEL=y
+ * 2.use one-direction load_acquire/store_release barrier
  * It depends on performance test results.
  * By default, move common functions to rte_ring_generic.h
  */
Signature · 1 line
2.17.1
#132 lore raw

PATCH v3 18/37 doc/guides: remove use of DPDK make build system

In reply to Ciara Power

From: Bruce Richardson <[email protected]>

When building the DPDK guide documents, the DPDK version information was pulled using "make showversion", which meant there was a dependency on the DPDK make-based build system. Change this to have the version info passed in from meson itself.

---
 buildtools/call-sphinx-build.py | 5 ++++-
 doc/guides/conf.py              | 7 +------
 doc/guides/meson.build          | 3 ++-
 3 files changed, 7 insertions(+), 8 deletions(-)
buildtools/call-sphinx-build.py +4 -1
index 85c9e01563..fa6f26b376 100755
@@ -9,7 +9,10 @@
 from subprocess import run, PIPE, STDOUT
 from distutils.version import StrictVersion
 
-(sphinx, src, dst) = sys.argv[1:]  # assign parameters to variables
+(sphinx, version, src, dst) = sys.argv[1:]  # assign parameters to variables
+
+# set the version in environment for sphinx to pick up
+os.environ['DPDK_VERSION'] = version
 
 # for sphinx version >= 1.7 add parallelism using "-j auto"
 ver = run([sphinx, '--version'], stdout=PIPE,
doc/guides/conf.py +1 -6
index d8fe5cccd7..9ebc26ed3f 100644
@@ -2,7 +2,6 @@
 # Copyright(c) 2010-2015 Intel Corporation
 
 from __future__ import print_function
-import subprocess
 from docutils import nodes
 from distutils.version import LooseVersion
 from sphinx import __version__ as sphinx_version
@@ -38,11 +37,7 @@
 html_show_copyright = False
 highlight_language = 'none'
 
-# If MAKEFLAGS is exported by the user, garbage text might end up in version
-version = subprocess.check_output(['make', '-sRrC', '../../', 'showversion'],
-                                  env=dict(environ, MAKEFLAGS=""))
-version = version.decode('utf-8').rstrip()
-release = version
+release = environ['DPDK_VERSION']
 
 master_doc = 'index'
 
doc/guides/meson.build +2 -1
index 732e7ad3a9..daab139c4e 100644
@@ -11,7 +11,8 @@ htmldir = join_paths(get_option('datadir'), 'doc', 'dpdk')
 html_guides = custom_target('html_guides',
 	input: files('index.rst'),
 	output: 'html',
-	command: [sphinx_wrapper, sphinx, meson.current_source_dir(), meson.current_build_dir()],
+	command: [sphinx_wrapper, sphinx, meson.project_version(),
+		meson.current_source_dir(), meson.current_build_dir()],
 	depfile: '.html.d',
 	build_by_default: get_option('enable_docs'),
 	install: get_option('enable_docs'),
Signature · 1 line
2.17.1
#133 lore raw

PATCH v3 19/37 doc: remove deprecation notice for make

In reply to Ciara Power

The deprecation notice for make can now be removed as this patchset removes the make build system.

---
 doc/guides/rel_notes/deprecation.rst | 7 -------
 1 file changed, 7 deletions(-)
doc/guides/rel_notes/deprecation.rst +0 -7
index 345c38d5b6..279eccb04a 100644
@@ -11,13 +11,6 @@ here.
 Deprecation Notices
 -------------------
 
-* make: Support for building DPDK with "make" has been deprecated and
-  support will be removed in the 20.11 release. From 20.11 onwards, DPDK
-  should be built using meson and ninja. For basic instructions see the
-  `Quick-start Guide <https://core.dpdk.org/doc/quick-start/>`_ on the
-  website or the `Getting Started Guide
-  <https://doc.dpdk.org/guides/linux_gsg/build_dpdk.html>`_ document.
-
 * meson: The minimum supported version of meson for configuring and building
   DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
   those users with a version earlier than 0.47.1, an updated copy of meson
Signature · 1 line
2.17.1
#134 lore raw

PATCH v3 20/37 doc: remove references to make in bbdev guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/bbdevs/fpga_5gnr_fec.rst |  7 ++-----
 doc/guides/bbdevs/fpga_lte_fec.rst  |  7 ++-----
 doc/guides/bbdevs/turbo_sw.rst      | 15 ---------------
 3 files changed, 4 insertions(+), 25 deletions(-)
doc/guides/bbdevs/fpga_5gnr_fec.rst +2 -5
index 6760391e8c..8e00c4ef22 100644
@@ -51,10 +51,7 @@ FPGA 5GNR FEC does not support the following:
 Installation
 ------------
 
-Section 3 of the DPDK manual provides instructions on installing and compiling DPDK. The
-default set of bbdev compile flags may be found in config/common_base, where for example
-the flag to build the FPGA 5GNR FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC``,
-is already set.
+Section 3 of the DPDK manual provides instructions on installing and compiling DPDK.
 
 DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual.
 The bbdev test application has been tested with a configuration 40 x 1GB hugepages. The
@@ -94,7 +91,7 @@ the UIO driver by repeating this command for every function.
 .. code-block:: console
 
   cd <dpdk-top-level-directory>
-  insmod ./build/kmod/igb_uio.ko
+  insmod ./<build_dir>/kernel/linux/igb_uio/igb_uio.ko
   echo "8086 0d8f" > /sys/bus/pci/drivers/igb_uio/new_id
   lspci -vd8086:0d8f
 
doc/guides/bbdevs/fpga_lte_fec.rst +2 -5
index fdc8a76981..14ffa0ee14 100644
@@ -50,10 +50,7 @@ FPGA LTE FEC does not support the following:
 Installation
 --------------
 
-Section 3 of the DPDK manual provides instructions on installing and compiling DPDK. The
-default set of bbdev compile flags may be found in config/common_base, where for example
-the flag to build the FPGA LTE FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC``, is already
-set.
+Section 3 of the DPDK manual provides instructions on installing and compiling DPDK.
 
 DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual.
 The bbdev test application has been tested with a configuration 40 x 1GB hugepages. The
@@ -93,7 +90,7 @@ the UIO driver by repeating this command for every function.
 .. code-block:: console
 
   cd <dpdk-top-level-directory>
-  insmod ./build/kmod/igb_uio.ko
+  insmod ./<build_dir>/kernel/linux/igb_uio/igb_uio.ko
   echo "1172 5052" > /sys/bus/pci/drivers/igb_uio/new_id
   lspci -vd1172:
 
doc/guides/bbdevs/turbo_sw.rst +0 -15
index 20620c2e20..3b93157890 100644
@@ -12,14 +12,6 @@ Note that the driver can also be built without any dependency with reduced
 functionality for maintenance purpose.
 
 To enable linking to the SDK libraries see detailed installation section below.
-Two flags can be enabled depending on whether the target machine can support
-AVX2 and AVX512 instructions sets and the related SDK libraries for vectorized
-signal processing functions are installed :
-- CONFIG_RTE_BBDEV_SDK_AVX2
-- CONFIG_RTE_BBDEV_SDK_AVX512
-By default these 2 flags are disabled by default. For AVX2 machine and SDK
-library installed then the first flag can be enabled. For AVX512 machine and
-SDK library installed then both flags can be enabled for full real time capability.
 
 This PMD supports the functions: FEC, Rate Matching and CRC functions detailed
 in the Features section.
@@ -151,13 +143,6 @@ Example:
     export FLEXRAN_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx2-icc/install
     export DIR_WIRELESS_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx2-icc/
 
-* Set ``CONFIG_RTE_BBDEV_SDK_AVX2=y`` and ``CONFIG_RTE_BBDEV_SDK_AVX512=y``
-  in DPDK common configuration file ``config/common_base`` to be able to use
-  the SDK libraries as mentioned above.
-  For AVX2 machine it is possible to only enable CONFIG_RTE_BBDEV_SDK_AVX2
-  for limited 4G functionality.
-  If no flag are set the PMD driver will still build but its capabilities
-  will be limited accordingly.
 
 To use the PMD in an application, user must:
 
Signature · 1 line
2.17.1
#135 lore raw

Re: [dpdk-dev] [PATCH v3 20/37] doc: remove references to make in bbdev guides

Quoted 104 lines

From: Power, Ciara <[email protected]>

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/bbdevs/fpga_5gnr_fec.rst |  7 ++-----
doc/guides/bbdevs/fpga_lte_fec.rst  |  7 ++-----
 doc/guides/bbdevs/turbo_sw.rst      | 15 ---------------
 3 files changed, 4 insertions(+), 25 deletions(-)
doc/guides/bbdevs/fpga_5gnr_fec.rst +0 -1
index 6760391e8c..8e00c4ef22 100644
@@ -51,10 +51,7 @@ FPGA 5GNR FEC does not support the following:
 Installation
 ------------
 
-Section 3 of the DPDK manual provides instructions on installing and compiling

DPDK. The -default set of bbdev compile flags may be found in config/common_base, where for example -the flag to build the FPGA 5GNR FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC``,

doc/guides/bbdevs/fpga_5gnr_fec.rst +1 -1
-is already set.
+Section 3 of the DPDK manual provides instructions on installing and compiling

DPDK.

DPDK requires hugepages to be configured as detailed in section 2 of the DPDK
manual.
The bbdev test application has been tested with a configuration 40 x 1GB
hugepages. The @@ -94,7 +91,7 @@ the UIO driver by repeating this command for every function.
.. code-block:: console

cd <dpdk-top-level-directory>

doc/guides/bbdevs/fpga_5gnr_fec.rst +1 -1
-  insmod ./build/kmod/igb_uio.ko
+  insmod ./<build_dir>/kernel/linux/igb_uio/igb_uio.ko
   echo "8086 0d8f" > /sys/bus/pci/drivers/igb_uio/new_id
   lspci -vd8086:0d8f
doc/guides/bbdevs/fpga_lte_fec.rst +0 -1
index fdc8a76981..14ffa0ee14 100644
@@ -50,10 +50,7 @@ FPGA LTE FEC does not support the following:
 Installation
 --------------
 
-Section 3 of the DPDK manual provides instructions on installing and compiling

DPDK. The -default set of bbdev compile flags may be found in config/common_base, where for example -the flag to build the FPGA LTE FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC``, is already -set. +Section 3 of the DPDK manual provides instructions on installing and compiling DPDK.

DPDK requires hugepages to be configured as detailed in section 2 of the DPDK
manual.
The bbdev test application has been tested with a configuration 40 x 1GB
hugepages. The @@ -93,7 +90,7 @@ the UIO driver by repeating this command for every function.
.. code-block:: console

cd <dpdk-top-level-directory>

doc/guides/bbdevs/fpga_lte_fec.rst +1 -1
-  insmod ./build/kmod/igb_uio.ko
+  insmod ./<build_dir>/kernel/linux/igb_uio/igb_uio.ko
   echo "1172 5052" > /sys/bus/pci/drivers/igb_uio/new_id
   lspci -vd1172:
doc/guides/bbdevs/turbo_sw.rst +0 -0
index 20620c2e20..3b93157890 100644
@@ -12,14 +12,6 @@ Note that the driver can also be built without any

dependency with reduced functionality for maintenance purpose.

To enable linking to the SDK libraries see detailed installation section below.
-Two flags can be enabled depending on whether the target machine can support

doc/guides/bbdevs/turbo_sw.rst +0 -5
-AVX2 and AVX512 instructions sets and the related SDK libraries for vectorized
-signal processing functions are installed :
-- CONFIG_RTE_BBDEV_SDK_AVX2
-- CONFIG_RTE_BBDEV_SDK_AVX512
-By default these 2 flags are disabled by default. For AVX2 machine and SDK -

library installed then the first flag can be enabled. For AVX512 machine and - SDK library installed then both flags can be enabled for full real time capability.

This PMD supports the functions: FEC, Rate Matching and CRC functions
detailed in the Features section.

doc/guides/bbdevs/turbo_sw.rst +0 -0
@@ -151,13 +143,6 @@ Example:
     export FLEXRAN_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-

04/sdk/build-avx2-icc/install
export DIR_WIRELESS_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-
04/sdk/build-avx2-icc/

-* Set ``CONFIG_RTE_BBDEV_SDK_AVX2=y`` and
``CONFIG_RTE_BBDEV_SDK_AVX512=y``

doc/guides/bbdevs/turbo_sw.rst +0 -3
-  in DPDK common configuration file ``config/common_base`` to be able to use
-  the SDK libraries as mentioned above.
-  For AVX2 machine it is possible to only enable

CONFIG_RTE_BBDEV_SDK_AVX2

doc/guides/bbdevs/turbo_sw.rst Example: · line 160

Quoted 3 lines
doc/guides/bbdevs/turbo_sw.rst +0 -3
-  for limited 4G functionality.
-  If no flag are set the PMD driver will still build but its capabilities
-  will be limited accordingly.

Hi,
This section needs to be replaced to match with the actual steps for meson:

Initialization
--------------

In order to enable this virtual bbdev PMD, the user may:

* Build the ``FLEXRAN SDK`` libraries (explained in Installation section).

* Export the environmental variables ``FLEXRAN_SDK`` to the path where the FlexRAN SDK libraries were installed. And ``DIR_WIRELESS_SDK`` to the path where the libraries were extracted.

* Tune the meson build option pointing the location of the FlexRAN SDK libraries ``flexran_sdk``

Example:

.. code-block:: console

export FLEXRAN_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx2-icc/install export DIR_WIRELESS_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx2-icc/ cd build
meson configure -Dflexran_sdk=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx512-icc/install

* For AVX512 machines with SDK libraries installed then both 4G and 5G can be enabled for full real time FEC capability. For AVX2 machines it is possible to only enable the 4G libraries and the PMD capabilities will be limited to 4G FEC. If no library is present then the PMD driver will still build but its capabilities will be limited accordingly.

Quoted 5 lines

To use the PMD in an application, user must:

--
2.17.1

#136 lore raw

PATCH v3 21/37 doc: remove references to make in compressdev guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/compressdevs/isal.rst     |  4 ----
 doc/guides/compressdevs/octeontx.rst | 24 ++----------------------
 doc/guides/compressdevs/zlib.rst     |  4 ----
 3 files changed, 2 insertions(+), 30 deletions(-)
doc/guides/compressdevs/isal.rst +0 -4
index af1f41f240..1d146fb4a6 100644
@@ -133,10 +133,6 @@ Installation
 Initialization
 --------------
 
-In order to enable this virtual compression PMD, user must:
-
-* Set ``CONFIG_RTE_LIBRTE_PMD_ISAL=y`` in config/common_base.
-
 To use the PMD in an application, user must:
 
 * Call ``rte_vdev_init("compress_isal")`` within the application.
doc/guides/compressdevs/octeontx.rst +2 -22
index 5924ad1fa3..8c658721b9 100644
@@ -56,21 +56,6 @@ Steps To Setup Platform
 
    SDK and related information can be obtained from: `Cavium support site <https://support.cavium.com/>`_.
 
-Installation
-------------
-
-Driver Compilation
-~~~~~~~~~~~~~~~~~~
-
-To compile the OCTEON TX ZIP PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-   .. code-block:: console
-
-      cd <DPDK-source-directory>
-      make config T=arm64-thunderx-linux-gcc install
-
-
 Initialization
 --------------
 
@@ -96,10 +81,5 @@ probed. To use the PMD in an application, user must:
    .. code-block:: console
 
       reserve enough huge pages
-      cd to the top-level DPDK directory
-      export RTE_TARGET=arm64-thunderx-linux-gcc
-      export RTE_SDK=`pwd`
-      cd to app/test
-      type the command "make" to compile
-      run the tests with "./test"
-      type the command "compressdev_autotest" to test
+      cd to <build_dir>
+      meson test compressdev_autotest
doc/guides/compressdevs/zlib.rst +0 -4
index 986c59d43b..6e397ecd7e 100644
@@ -53,10 +53,6 @@ Installation
 Initialization
 --------------
 
-In order to enable this virtual compression PMD, user must:
-
-* Set ``CONFIG_RTE_LIBRTE_PMD_ZLIB=y`` in config/common_base.
-
 To use the PMD in an application, user must:
 
 * Call ``rte_vdev_init("compress_zlib")`` within the application.
Signature · 1 line
2.17.1
#137 lore raw

PATCH v3 22/37 doc: remove references to make in contributing guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/contributing/coding_style.rst  |  46 +-------
 doc/guides/contributing/design.rst        | 127 ++--------------------
 doc/guides/contributing/documentation.rst |  31 +-----
 doc/guides/contributing/patches.rst       |  45 --------
 4 files changed, 18 insertions(+), 231 deletions(-)
doc/guides/contributing/coding_style.rst +5 -41
index b55075eaa2..dc352d03ca 100644
@@ -773,52 +773,16 @@ The ``pep8`` tool can be used for testing compliance with the guidelines.
 Integrating with the Build System
 ---------------------------------
 
-DPDK supports being built in two different ways:
-
-* using ``make`` - or more specifically "GNU make", i.e. ``gmake`` on FreeBSD
-* using the tools ``meson`` and ``ninja``
+DPDK supports being built by using the tools ``meson`` and ``ninja``
 
 Any new library or driver to be integrated into DPDK should support being
-built with both systems. While building using ``make`` is a legacy approach, and
-most build-system enhancements are being done using ``meson`` and ``ninja``
-there are no plans at this time to deprecate the legacy ``make`` build system.
+built with this system.
 
-Therefore all new component additions should include both a ``Makefile`` and a
-``meson.build`` file, and should be added to the component lists in both the
-``Makefile`` and ``meson.build`` files in the relevant top-level directory:
+Therefore all new component additions should include a ``meson.build`` file,
+and should be added to the component lists in the ``meson.build`` files in the
+relevant top-level directory:
 either ``lib`` directory or a ``driver`` subdirectory.
 
-Makefile Contents
-~~~~~~~~~~~~~~~~~
-
-The ``Makefile`` for the component should be of the following format, where
-``<name>`` corresponds to the name of the library in question, e.g. hash,
-lpm, etc. For drivers, the same format of Makefile is used.
-
-.. code-block:: none
-
-	# pull in basic DPDK definitions, including whether library is to be
-	# built or not
-	include $(RTE_SDK)/mk/rte.vars.mk
-
-	# library name
-	LIB = librte_<name>.a
-
-	# any library cflags needed. Generally add "-O3 $(WERROR_FLAGS)"
-	CFLAGS += -O3
-	CFLAGS += $(WERROR_FLAGS)
-
-	# the symbol version information for the library
-	EXPORT_MAP := rte_<name>_version.map
-
-	# all source filenames are stored in SRCS-y
-	SRCS-$(CONFIG_RTE_LIBRTE_<NAME>) += rte_<name>.c
-
-	# install includes
-	SYMLINK-$(CONFIG_RTE_LIBRTE_<NAME>)-include += rte_<name>.h
-
-	# pull in rules to build the library
-	include $(RTE_SDK)/mk/rte.lib.mk
 
 Meson Build File Contents - Libraries
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
doc/guides/contributing/design.rst +7 -120

155 lines not on this page · raw message

doc/guides/contributing/documentation.rst +6 -25
index 375ea64ba8..768453126f 100644
@@ -222,25 +222,14 @@ Build commands
 ~~~~~~~~~~~~~~
 
 The documentation is built using the standard DPDK build system.
-Some examples are shown below:
 
-* Generate all the documentation targets::
+To enable doc building::
 
-     make doc
+   meson configure -Denable_docs=true
 
-* Generate the Doxygen API documentation in Html::
+See :doc:`../linux_gsg/build_dpdk` for more detail on compiling DPDK with meson.
 
-     make doc-api-html
-
-* Generate the guides documentation in Html::
-
-     make doc-guides-html
-
-* Generate the guides documentation in Pdf::
-
-     make doc-guides-pdf
-
-The output of these commands is generated in the ``build`` directory::
+The output is generated in the ``build`` directory::
 
    build/doc
          |-- html
@@ -255,10 +244,6 @@ The output of these commands is generated in the ``build`` directory::
 
    Make sure to fix any Sphinx or Doxygen warnings when adding or updating documentation.
 
-The documentation output files can be removed as follows::
-
-   make doc-clean
-
 
 Document Guidelines
 -------------------
@@ -308,7 +293,7 @@ Line Length
   Long literal command lines can be shown wrapped with backslashes. For
   example::
 
-     testpmd -l 2-3 -n 4 \
+     dpdk-testpmd -l 2-3 -n 4 \
              --vdev=virtio_user0,path=/dev/vhost-net,queues=2,queue_size=1024 \
              -- -i --tx-offloads=0x0000002c --enable-lro --txq=2 --rxq=2 \
              --txd=1024 --rxd=1024
@@ -460,7 +445,7 @@ Code and Literal block sections
   For long literal lines that exceed that limit try to wrap the text at sensible locations.
   For example a long command line could be documented like this and still work if copied directly from the docs::
 
-     build/app/testpmd -l 0-2 -n3 --vdev=net_pcap0,iface=eth0     \
+     ./<build_dir>/app/dpdk-testpmd -l 0-2 -n3 --vdev=net_pcap0,iface=eth0    \
                                --vdev=net_pcap1,iface=eth1     \
                                -- -i --nb-cores=2 --nb-ports=2 \
                                   --total-num-mbufs=2048
@@ -743,9 +728,5 @@ The following are some guidelines for use of Doxygen in the DPDK API documentati
      /** Array of physical page addresses for the mempool buffer. */
      phys_addr_t elt_pa[MEMPOOL_PG_NUM_DEFAULT];
 
-* Check for Doxygen warnings in new code by checking the API documentation build::
-
-     make doc-api-html >/dev/null
-
 * Read the rendered section of the documentation that you have added for correctness, clarity and consistency
   with the surrounding text.
doc/guides/contributing/patches.rst +0 -45

51 lines not on this page · raw message

Signature · 1 line
2.17.1
#138 lore raw

Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

doc/guides/contributing/coding_style.rst The ``pep8`` tool can be used for testing compliance with the guidelines. · line 776

Quoted 8 lines · Ciara Power
doc/guides/contributing/coding_style.rst +0 -3
-DPDK supports being built in two different ways:
-
-* using ``make`` - or more specifically "GNU make", i.e. ``gmake`` on

FreeBSD

doc/guides/contributing/coding_style.rst +1 -1
-* using the tools ``meson`` and ``ninja``
+DPDK supports being built by using the tools ``meson`` and ``ninja``

We can simply say "DPDK *is* built".
I will add a final dot at the end of the sentence.

Quoted 9 lines

Any new library or driver to be integrated into DPDK should support being
-built with both systems. While building using ``make`` is a legacy approach, and
-most build-system enhancements are being done using ``meson`` and ``ninja``
-there are no plans at this time to deprecate the legacy ``make`` build system.
+built with this system.

I think this paragraph does not make sense anymore.

Quoted 12 lines

-Therefore all new component additions should include both a ``Makefile`` and a
-``meson.build`` file, and should be added to the component lists in both the
-``Makefile`` and ``meson.build`` files in the relevant top-level directory:
+Therefore all new component additions should include a ``meson.build`` file,
+and should be added to the component lists in the ``meson.build`` files in the
+relevant top-level directory:
either ``lib`` directory or a ``driver`` subdirectory.

[...]

Quoted 16 lines
doc/guides/contributing/design.rst +0 -0

When absolutely necessary, there are several ways to handle specific code:

doc/guides/contributing/design.rst +1 -1
-* Use a ``#ifdef`` with the CONFIG option in the C code.
+* Use a ``#ifdef`` with a build definition macro in the C code.

This can be done when the differences are small and they can be embedded in the same C file:

.. code-block:: c

doc/guides/contributing/design.rst +0 -0
@@ -32,30 +32,22 @@ When absolutely necessary, there are several ways to

handle specific code:
titi();
#endif

Quoted 5 lines

-* Use the CONFIG option in the Makefile. This is done when the differences are more significant.
- In this case, the code is split into two separate files that are architecture or environment specific.
- This should only apply inside the EAL library.

If removing this last item, there are no "several ways" anymore. I think we should keep it (reworded) because we still have files compiled depending on the target architecture.

[...]

Quoted 11 lines
doc/guides/contributing/design.rst +0 -7
-Library Statistics
-------------------
-
-Description
-~~~~~~~~~~~
-
-This document describes the guidelines for DPDK library-level

statistics counter
-support. This includes guidelines for turning library statistics on and off and
-requirements for preventing ABI changes when implementing statistics.

I think the ABI part is still relevant.

[...]

Quoted 22 lines
doc/guides/contributing/design.rst +0 -4
-Prevention of ABI changes due to library statistics support
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The layout of data structures and prototype of functions that are part

of the
-library API should not be affected by whether the collection of statistics
-counters is turned on or off for the current library. In practical terms, this
-means that space should always be allocated in the API data structures for
-statistics counters and the statistics related API functions are always built
-into the code, regardless of whether the statistics counter collection is turned

doc/guides/contributing/design.rst +0 -3
-on or off for the current library.
-
-When the collection of statistics counters for the current library is

turned
-off, the counters retrieved through the statistics related API functions should
-have a default value of zero.

#139 lore raw

Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

Hi Thomas,

One comment inline.

Thanks,
Ciara

Quoted 10 lines

-----Original Message-----
From: Thomas Monjalon <[email protected]>
Sent: Monday 7 September 2020 11:21
To: Power, Ciara <[email protected]>; [email protected]
Cc: Kilheeney, Louise <[email protected]>; Mcnamara, John <[email protected]>; Kovacevic, Marko <[email protected]>
Subject: Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

<snip>

Quoted 13 lines

[...]

Quoted 10 lines
doc/guides/contributing/design.rst +0 -7
-Library Statistics
-------------------
-
-Description
-~~~~~~~~~~~
-
-This document describes the guidelines for DPDK library-level

statistics counter -support. This includes guidelines for turning library statistics on and off and -requirements for preventing ABI changes when implementing statistics.

I think the ABI part is still relevant.

Looking for some clarification on this. Which parts (if any) of the library statistics section should be added back in for the ABI section below to make sense being included? Or what do you suggest doing here?

Quoted 16 lines

[...]

Quoted 15 lines
doc/guides/contributing/design.rst +0 -4
-Prevention of ABI changes due to library statistics support
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The layout of data structures and prototype of functions that are

part of the -library API should not be affected by whether the collection of statistics -counters is turned on or off for the current library. In practical terms, this -means that space should always be allocated in the API data structures for -statistics counters and the statistics related API functions are always built -into the code, regardless of whether the statistics counter collection is turned -on or off for the current library.

(quoted diff) +0 -2
-
-When the collection of statistics counters for the current library is

turned -off, the counters retrieved through the statistics related API functions should -have a default value of zero.

#140 lore raw

Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

17/09/2020 15:44, Power, Ciara:

Quoted 35 lines

Hi Thomas,

One comment inline.

Thanks,
Ciara

Quoted 10 lines

-----Original Message-----
From: Thomas Monjalon <[email protected]>
Sent: Monday 7 September 2020 11:21
To: Power, Ciara <[email protected]>; [email protected]
Cc: Kilheeney, Louise <[email protected]>; Mcnamara, John <[email protected]>; Kovacevic, Marko <[email protected]>
Subject: Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

<snip>

Quoted 13 lines

[...]

Quoted 10 lines
doc/guides/contributing/design.rst +0 -7
-Library Statistics
-------------------
-
-Description
-~~~~~~~~~~~
-
-This document describes the guidelines for DPDK library-level

statistics counter -support. This includes guidelines for turning library statistics on and off and -requirements for preventing ABI changes when implementing statistics.

I think the ABI part is still relevant.

Quoted 2 lines

Looking for some clarification on this. Which parts (if any) of the library statistics section should be added back in for the ABI section below to make sense being included? Or what do you suggest doing here?

I think we can consider we still have the ability to turn stats off because of the #ifdef still being there.
Cristian, do you think we should remove this doc?
Is on/off still possible in the new pipeline libs?

Quoted 16 lines
Quoted 16 lines

[...]

Quoted 15 lines
doc/guides/contributing/design.rst +0 -4
-Prevention of ABI changes due to library statistics support
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The layout of data structures and prototype of functions that are

part of the -library API should not be affected by whether the collection of statistics -counters is turned on or off for the current library. In practical terms, this -means that space should always be allocated in the API data structures for -statistics counters and the statistics related API functions are always built -into the code, regardless of whether the statistics counter collection is turned -on or off for the current library.

(quoted diff) +0 -2
-
-When the collection of statistics counters for the current library is

turned -off, the counters retrieved through the statistics related API functions should -have a default value of zero.

#141 lore raw

Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

Quoted 51 lines

-----Original Message-----
From: Thomas Monjalon <[email protected]>
Sent: Monday, September 21, 2020 5:15 PM
To: Power, Ciara <[email protected]>; Dumitrescu, Cristian <[email protected]>
Cc: [email protected]; Mcnamara, John <[email protected]>; Kovacevic, Marko <[email protected]>; Richardson, Bruce <[email protected]>
Subject: Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

17/09/2020 15:44, Power, Ciara:

Quoted 16 lines

Hi Thomas,

One comment inline.

Thanks,
Ciara

Quoted 8 lines

-----Original Message-----
From: Thomas Monjalon <[email protected]>
Sent: Monday 7 September 2020 11:21
To: Power, Ciara <[email protected]>; [email protected]
Cc: Kilheeney, Louise <[email protected]>; Mcnamara, John <[email protected]>; Kovacevic, Marko <[email protected]>
Subject: Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to

make in

Quoted 19 lines
Quoted 2 lines

contributing guides

<snip>

Quoted 13 lines

[...]

Quoted 10 lines
doc/guides/contributing/design.rst +0 -7
-Library Statistics
-------------------
-
-Description
-~~~~~~~~~~~
-
-This document describes the guidelines for DPDK library-level

statistics counter -support. This includes guidelines for turning library statistics on and off and -requirements for preventing ABI changes when implementing statistics.

I think the ABI part is still relevant.

Quoted 1 line

Looking for some clarification on this. Which parts (if any) of the library

Quoted 9 lines

statistics section should be

Quoted 1 line

added back in for the ABI section below to make sense being included? Or

what do you suggest doing here?

I think we can consider we still have the ability to turn stats off because of the #ifdef still being there.
Cristian, do you think we should remove this doc?
Is on/off still possible in the new pipeline libs?

Hi Ciara and Thomas,

IMO this section is still relevant and it is unrelated to the topic of this patch set, why do we want to remove it?

From the make removal point of view, we only need the following change, and everything else is still logically valid:

-   # DPDK file config/common_linux, config/common_freebsd, etc.
-   CONFIG_RTE_<LIBRARY_NAME>_STATS_COLLECT=y/n
+   /* Library API header file. */

+ #define RTE_<LIBRARY_NAME>_STATS_COLLECT

On the larger stats topic, I think the section is still relevant, especially from the point of view of avoiding ABI breakage due to stats, which is applicable to several libraries, so I suggest to keep it.

In the new pipeline libs (rte_swx_pipeline.h API), all the stats are enabled by default.

Regards,
Cristian

Quoted 21 lines
Quoted 4 lines
Quoted 4 lines

[...]

Review

Quoted 2 lines
(quoted diff) +0 -2
-Prevention of ABI changes due to library statistics support
-

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
(quoted diff) +0 -2
-
-The layout of data structures and prototype of functions that are

part of the -library API should not be affected by whether the collection of statistics -counters is turned on or off for the current library. In practical terms, this -means that space should always be allocated in the API data structures for -statistics counters and the statistics related API functions are always built -into the code, regardless of whether the statistics counter collection is turned -on or off for the current library.

(quoted diff) +0 -2
-
-When the collection of statistics counters for the current library is

turned -off, the counters retrieved through the statistics related API functions should -have a default value of zero.

#142 lore raw

Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

Hi Cristian, Thomas,

Quoted 11 lines

-----Original Message-----
From: Dumitrescu, Cristian <[email protected]>
Sent: Monday 21 September 2020 20:14
To: Thomas Monjalon <[email protected]>; Power, Ciara <[email protected]>
Cc: [email protected]; Mcnamara, John <[email protected]>; Kovacevic, Marko <[email protected]>; Richardson, Bruce <[email protected]>
Subject: RE: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

<snip>

Quoted 43 lines
Quoted 17 lines
Quoted 14 lines
Quoted 13 lines

[...]

Quoted 10 lines
doc/guides/contributing/design.rst +0 -7
-Library Statistics
-------------------
-
-Description
-~~~~~~~~~~~
-
-This document describes the guidelines for DPDK library-level

statistics counter -support. This includes guidelines for turning library statistics on and off and -requirements for preventing ABI changes when implementing statistics.

I think the ABI part is still relevant.

Quoted 2 lines

Looking for some clarification on this. Which parts (if any) of the library

statistics section should be

Quoted 9 lines
Quoted 2 lines

added back in for the ABI section below to make sense being included? Or

what do you suggest doing here?

I think we can consider we still have the ability to turn stats off because of the #ifdef still being there.
Cristian, do you think we should remove this doc?
Is on/off still possible in the new pipeline libs?

Hi Ciara and Thomas,

IMO this section is still relevant and it is unrelated to the topic of this patch set, why do we want to remove it?

From the make removal point of view, we only need the following change, and everything else is still logically valid:

doc/guides/contributing/design.rst +2 -2
-   # DPDK file config/common_linux, config/common_freebsd, etc.
-   CONFIG_RTE_<LIBRARY_NAME>_STATS_COLLECT=y/n
+   /* Library API header file. */
+  #define RTE_<LIBRARY_NAME>_STATS_COLLECT

On the larger stats topic, I think the section is still relevant, especially from the point of view of avoiding ABI breakage due to stats, which is applicable to several libraries, so I suggest to keep it.

Quoted 6 lines

In the new pipeline libs (rte_swx_pipeline.h API), all the stats are enabled by default.

Regards,
Cristian

I agree the Library Statistics is still relevant, having looked at it again since sending v1. I sent a v5 of this patchset yesterday just before your feedback here, and kept the full section but modified the instructions on how to enable/disable, removing the mention of CONFIG options. Please have a look at those changes here: https://patchwork.dpdk.org/patch/78208/

Thanks,
Ciara

#143 lore raw

Re: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

Quoted 93 lines

-----Original Message-----
From: Power, Ciara <[email protected]>
Sent: Tuesday, September 22, 2020 9:40 AM
To: Dumitrescu, Cristian <[email protected]>; Thomas Monjalon <[email protected]>
Cc: [email protected]; Mcnamara, John <[email protected]>; Kovacevic, Marko <[email protected]>; Richardson, Bruce <[email protected]>
Subject: RE: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make in contributing guides

Hi Cristian, Thomas,

Quoted 6 lines

-----Original Message-----
From: Dumitrescu, Cristian <[email protected]>
Sent: Monday 21 September 2020 20:14
To: Thomas Monjalon <[email protected]>; Power, Ciara <[email protected]>
Cc: [email protected]; Mcnamara, John <[email protected]>;

Kovacevic,

Quoted 3 lines

Marko <[email protected]>; Richardson, Bruce <[email protected]>
Subject: RE: [dpdk-dev] [PATCH v3 22/37] doc: remove references to make

in

Quoted 2 lines

contributing guides

<snip>

Quoted 39 lines
Quoted 17 lines
Quoted 14 lines
Quoted 13 lines

[...]

Quoted 10 lines
doc/guides/contributing/design.rst +0 -7
-Library Statistics
-------------------
-
-Description
-~~~~~~~~~~~
-
-This document describes the guidelines for DPDK library-level

statistics counter -support. This includes guidelines for turning library statistics on and off and -requirements for preventing ABI changes when implementing statistics.

I think the ABI part is still relevant.

Quoted 2 lines

Looking for some clarification on this. Which parts (if any) of the library

statistics section should be

Quoted 9 lines
Quoted 2 lines

added back in for the ABI section below to make sense being included? Or

what do you suggest doing here?

I think we can consider we still have the ability to turn stats off because of the #ifdef still being there.
Cristian, do you think we should remove this doc?
Is on/off still possible in the new pipeline libs?

Hi Ciara and Thomas,

IMO this section is still relevant and it is unrelated to the topic of this patch set, why do we want to remove it?

From the make removal point of view, we only need the following change, and everything else is still logically valid:

doc/guides/contributing/design.rst +2 -2
-   # DPDK file config/common_linux, config/common_freebsd, etc.
-   CONFIG_RTE_<LIBRARY_NAME>_STATS_COLLECT=y/n
+   /* Library API header file. */
+  #define RTE_<LIBRARY_NAME>_STATS_COLLECT
Quoted 2 lines

On the larger stats topic, I think the section is still relevant, especially from the point of view of avoiding ABI breakage due to stats, which is applicable

to

Quoted 3 lines

several libraries, so I suggest to keep it.

In the new pipeline libs (rte_swx_pipeline.h API), all the stats are enabled

by

Quoted 5 lines

default.

Regards,
Cristian

I agree the Library Statistics is still relevant, having looked at it again since sending v1.
I sent a v5 of this patchset yesterday just before your feedback here, and kept the full
section but modified the instructions on how to enable/disable, removing the mention
of CONFIG options. Please have a look at those changes here:
https://patchwork.dpdk.org/patch/78208/

Quoted 3 lines

Thanks,
Ciara

Cool with me, thanks Ciara.

#144 lore raw

PATCH v3 23/37 doc: remove references to make in cryptodev guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/cryptodevs/aesni_gcm.rst |  4 +-
 doc/guides/cryptodevs/aesni_mb.rst  |  4 +-
 doc/guides/cryptodevs/armv8.rst     |  3 --
 doc/guides/cryptodevs/caam_jr.rst   | 30 -------------
 doc/guides/cryptodevs/ccp.rst       | 14 +++---
 doc/guides/cryptodevs/dpaa2_sec.rst | 25 -----------
 doc/guides/cryptodevs/dpaa_sec.rst  | 25 -----------
 doc/guides/cryptodevs/kasumi.rst    | 11 +----
 doc/guides/cryptodevs/mvsam.rst     | 10 +----
 doc/guides/cryptodevs/nitrox.rst    |  7 ---
 doc/guides/cryptodevs/null.rst      |  2 +-
 doc/guides/cryptodevs/octeontx.rst  | 12 +-----
 doc/guides/cryptodevs/octeontx2.rst |  8 +---
 doc/guides/cryptodevs/openssl.rst   |  6 +--
 doc/guides/cryptodevs/qat.rst       | 67 +++++++----------------------
 doc/guides/cryptodevs/scheduler.rst |  8 ----
 doc/guides/cryptodevs/snow3g.rst    | 10 +----
 doc/guides/cryptodevs/virtio.rst    | 20 +++------
 doc/guides/cryptodevs/zuc.rst       | 10 +----
 19 files changed, 40 insertions(+), 236 deletions(-)
doc/guides/cryptodevs/aesni_gcm.rst +1 -3
index 74e0de63ad..013615e2d0 100644
@@ -96,8 +96,6 @@ In order to enable this virtual crypto PMD, user must:
 
 * Build the multi buffer library (explained in Installation section).
 
-* Set CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y in config/common_base.
-
 To use the PMD in an application, user must:
 
 * Call rte_vdev_init("crypto_aesni_gcm") within the application.
@@ -117,5 +115,5 @@ Example:
 
 .. code-block:: console
 
-    ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_aesni_gcm,socket_id=0,max_nb_sessions=128" \
+    ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_aesni_gcm,socket_id=0,max_nb_sessions=128" \
     -- -p 1 --cdev SW --chain AEAD --aead_algo "aes-gcm"
doc/guides/cryptodevs/aesni_mb.rst +1 -3
index 15388d20ab..fd533ca65b 100644
@@ -131,8 +131,6 @@ In order to enable this virtual crypto PMD, user must:
 
 * Build the multi buffer library (explained in Installation section).
 
-* Set CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y in config/common_base.
-
 To use the PMD in an application, user must:
 
 * Call rte_vdev_init("crypto_aesni_mb") within the application.
@@ -152,7 +150,7 @@ Example:
 
 .. code-block:: console
 
-    ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_aesni_mb,socket_id=0,max_nb_sessions=128" \
+    ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_aesni_mb,socket_id=0,max_nb_sessions=128" \
     -- -p 1 --cdev SW --chain CIPHER_HASH --cipher_algo "aes-cbc" --auth_algo "sha1-hmac"
 
 Extra notes
doc/guides/cryptodevs/armv8.rst +0 -3
index fee85354ba..d30ef6168e 100644
@@ -40,9 +40,6 @@ In order to enable this virtual crypto PMD, user must:
 
 	make -C $ARMV8_CRYPTO_LIB_PATH/
 
-* Set CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=y in
-  config/defconfig_arm64-armv8a-linux-gcc
-
 The corresponding device can be created only if the following features
 are supported by the CPU:
 
doc/guides/cryptodevs/caam_jr.rst +0 -30
index 6d9daf7364..5ef33ae78e 100644
@@ -109,36 +109,6 @@ Currently supported by DPDK:
 
 * Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
 
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file
-to enable caam_jr PMD.
-
-Please note that enabling debugging options may affect system performance.
-
-* ``CONFIG_RTE_LIBRTE_PMD_CAAM_JR`` (default ``n``)
-  By default it is only enabled in common_linux config.
-  Toggle compilation of the ``librte_pmd_caam_jr`` driver.
-
-* ``CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE`` (default ``n``)
-  By default it is disabled.
-  It can be used when the underlying hardware supports the CAAM in BE mode.
-  LS1043A, LS1046A and LS1012A support CAAM in BE mode.
-  LS1028A supports CAAM in LE mode.
-
-Installations
--------------
-To compile the caam_jr PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
-
-   cd <DPDK-source-directory>
-   make config T=arm64-armv8a-linux-gcc install
 
 Enabling logs
 -------------
doc/guides/cryptodevs/ccp.rst +5 -9
index a43fe92de9..9ca1979994 100644
@@ -56,10 +56,8 @@ AEAD algorithms:
 Installation
 ------------
 
-To compile ccp PMD, it has to be enabled in the config/common_base file and openssl
-packages have to be installed in the build environment.
-
-* ``CONFIG_RTE_LIBRTE_PMD_CCP=y``
+To compile ccp PMD, openssl packages have to be installed in the build
+environment.
 
 For Ubuntu 16.04 LTS use below to install openssl in the build system:
 
@@ -77,7 +75,7 @@ e.g. for the 0x1456 device::
 
 	cd to the top-level DPDK directory
 	modprobe uio
-	insmod ./build/kmod/igb_uio.ko
+	insmod ./<build_dir>/kernel/linux/igb_uio/igb_uio.ko
 	echo "1022 1456" > /sys/bus/pci/drivers/igb_uio/new_id
 
 Another way to bind the CCP devices to DPDK UIO driver is by using the ``dpdk-devbind.py`` script.
@@ -86,8 +84,6 @@ The following command assumes ``BFD`` as ``0000:09:00.2``::
 	cd to the top-level DPDK directory
 	./usertools/dpdk-devbind.py -b igb_uio 0000:09:00.2
 
-In order to enable the ccp crypto PMD, user must set CONFIG_RTE_LIBRTE_PMD_CCP=y in config/common_base.
-
 To use the PMD in an application, user must:
 
 * Call rte_vdev_init("crypto_ccp") within the application.
@@ -109,7 +105,7 @@ To validate ccp pmd, l2fwd-crypto example can be used with following command:
 
 .. code-block:: console
 
-        sudo ./build/l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp" -- -p 0x1
+        sudo ./<build_dir>/examples/dpdk-l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp" -- -p 0x1
         --chain CIPHER_HASH --cipher_op ENCRYPT --cipher_algo aes-cbc
         --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
         --cipher_iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
@@ -124,7 +120,7 @@ following:
 
 .. code-block:: console
 
-        sudo ./build/l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp,ccp_auth_opt=1" -- -p 0x1
+        sudo ./<build_dir>/examples/dpdk-l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp,ccp_auth_opt=1" -- -p 0x1
         --chain CIPHER_HASH --cipher_op ENCRYPT --cipher_algo aes-cbc
         --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
         --cipher_iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
doc/guides/cryptodevs/dpaa2_sec.rst +0 -25
index 3053636b82..080768a2e7 100644
@@ -167,31 +167,6 @@ Currently supported by DPDK:
 
 - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
 
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-Basic DPAA2 config file options are described in :ref:`dpaa2_overview`.
-In addition to those, the following options can be modified in the ``config`` file
-to enable DPAA2_SEC PMD.
-
-Please note that enabling debugging options may affect system performance.
-
-* ``CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC`` (default ``n``)
-  By default it is only enabled in defconfig_arm64-dpaa-* config.
-  Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver.
-
-Installations
--------------
-To compile the DPAA2_SEC PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
-
-   cd <DPDK-source-directory>
-   make config T=arm64-dpaa-linux-gcc install
 
 Enabling logs
 -------------
doc/guides/cryptodevs/dpaa_sec.rst +0 -25
index db3c8e9189..da14a68d9c 100644
@@ -111,31 +111,6 @@ See :doc:`../platform/dpaa` for setup information
 
 - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
 
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-Basic DPAA config file options are described in :ref:`dpaa_overview`.
-In addition to those, the following options can be modified in the ``config`` file
-to enable DPAA_SEC PMD.
-
-Please note that enabling debugging options may affect system performance.
-
-* ``CONFIG_RTE_LIBRTE_PMD_DPAA_SEC`` (default ``n``)
-  By default it is only enabled in defconfig_arm64-dpaa-* config.
-  Toggle compilation of the ``librte_pmd_dpaa_sec`` driver.
-
-Installations
--------------
-To compile the DPAA_SEC PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
-
-   cd <DPDK-source-directory>
-   make config T=arm64-dpaa-linux-gcc install
 
 Enabling logs
 -------------
doc/guides/cryptodevs/kasumi.rst +1 -10
index 09a538f816..5770a60cb2 100644
@@ -89,15 +89,6 @@ In order to enable this virtual crypto PMD, user must:
 
 * Build the multi buffer library (explained in Installation section).
 
-* Build DPDK as follows:
-
-.. code-block:: console
-
-	make config T=x86_64-native-linux-gcc
-	sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_KASUMI\)=n,\1=y,' build/.config
-	make
-
-
 To use the PMD in an application, user must:
 
 * Call rte_vdev_init("crypto_kasumi") within the application.
@@ -117,7 +108,7 @@ Example:
 
 .. code-block:: console
 
-    ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_kasumi,socket_id=0,max_nb_sessions=128" \
+    ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_kasumi,socket_id=0,max_nb_sessions=128" \
     -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "kasumi-f8"
 
 Extra notes on KASUMI F9
doc/guides/cryptodevs/mvsam.rst +1 -9
index 399fe37a67..6188c1248c 100644
@@ -64,14 +64,6 @@ Limitations
 Installation
 ------------
 
-MVSAM CRYPTO PMD driver compilation is disabled by default due to external dependencies.
-Currently there are two driver specific compilation options in
-``config/common_base`` available:
-
-- ``CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO`` (default: ``n``)
-
-    Toggle compilation of the librte_pmd_mvsam driver.
-
 MVSAM CRYPTO PMD requires MUSDK built with EIP197 support thus following
 extra option must be passed to the library configuration script:
 
@@ -105,7 +97,7 @@ operation:
 
 .. code-block:: console
 
-   ./l2fwd-crypto --vdev=eth_mvpp2,iface=eth0 --vdev=crypto_mvsam -- \
+   ./dpdk-l2fwd-crypto --vdev=eth_mvpp2,iface=eth0 --vdev=crypto_mvsam -- \
      --cipher_op ENCRYPT --cipher_algo aes-cbc \
      --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f  \
      --auth_op GENERATE --auth_algo sha1-hmac \
doc/guides/cryptodevs/nitrox.rst +0 -7
index 85f5212b64..2f0565b49e 100644
@@ -33,13 +33,6 @@ Limitations
 * 3DES Cipher Only combination is not supported.
 * Session-less APIs are not supported.
 
-Installation
-------------
-
-For compiling the Nitrox crypto PMD, please check if the
-CONFIG_RTE_LIBRTE_PMD_NITROX setting is set to `y` in config/common_base file.
-
-* ``CONFIG_RTE_LIBRTE_PMD_NITROX=y``
 
 Initialization
 --------------
doc/guides/cryptodevs/null.rst +1 -1
index c980e0ac84..aac5904b1d 100644
@@ -67,5 +67,5 @@ Example:
 
 .. code-block:: console
 
-    ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_null,socket_id=0,max_nb_sessions=128" \
+    ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_null,socket_id=0,max_nb_sessions=128" \
     -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "null"
doc/guides/cryptodevs/octeontx.rst +2 -10
index 4fa199e3c4..d813cb2974 100644
@@ -59,14 +59,6 @@ Supported Asymmetric Crypto Algorithms
 * ``RTE_CRYPTO_ASYM_XFORM_RSA``
 * ``RTE_CRYPTO_ASYM_XFORM_MODEX``
 
-Config flags
-------------
-
-For compiling the OCTEON TX crypto poll mode driver, please check if the
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO setting is set to `y` in
-config/common_base file.
-
-* ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y``
 
 Compilation
 -----------
@@ -135,7 +127,7 @@ application:
 
 .. code-block:: console
 
-        ./test
+        ./dpdk-test
         RTE>>cryptodev_octeontx_autotest
 
 The asymmetric crypto operations on OCTEON TX crypto PMD may be verified by running the test
@@ -143,5 +135,5 @@ application:
 
 .. code-block:: console
 
-        ./test
+        ./dpdk-test
         RTE>>cryptodev_octeontx_asym_autotest
doc/guides/cryptodevs/octeontx2.rst +2 -6
index 432146db04..bb4af3a04d 100644
@@ -70,10 +70,6 @@ Installation
 The OCTEON TX2 crypto PMD may be compiled natively on an OCTEON TX2 platform or
 cross-compiled on an x86 platform.
 
-Enable OCTEON TX2 crypto PMD in your config file:
-
-* ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO=y``
-
 Refer to :doc:`../platform/octeontx2` for instructions to build your DPDK
 application.
 
@@ -148,7 +144,7 @@ application:
 
 .. code-block:: console
 
-    ./test
+    ./dpdk-test
     RTE>>cryptodev_octeontx2_autotest
 
 The asymmetric crypto operations on OCTEON TX2 crypto PMD may be verified by running the test
@@ -156,7 +152,7 @@ application:
 
 .. code-block:: console
 
-    ./test
+    ./dpdk-test
     RTE>>cryptodev_octeontx2_asym_autotest
 
 
doc/guides/cryptodevs/openssl.rst +3 -3
index 7407294813..ca0f0b43f3 100644
@@ -58,8 +58,8 @@ Supported Asymmetric Crypto algorithms:
 Installation
 ------------
 
-To compile openssl PMD, it has to be enabled in the config/common_base file
-and appropriate openssl packages have to be installed in the build environment.
+To compile openssl PMD, appropriate openssl packages have to be installed
+in the build environment.
 
 The newest openssl library version is supported:
 
@@ -93,7 +93,7 @@ To verify real traffic l2fwd-crypto example can be used with this command:
 
 .. code-block:: console
 
-	sudo ./build/l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_openssl"
+	sudo ./<build_dir>/examples/dpdk-l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_openssl"
 	--vdev "crypto_openssl"-- -p 0x3 --chain CIPHER_HASH
 	--cipher_op ENCRYPT --cipher_algo AES_CBC
 	--cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
doc/guides/cryptodevs/qat.rst +16 -51

129 lines not on this page · raw message

doc/guides/cryptodevs/scheduler.rst +0 -8
index 7004ca431a..ee23b25b73 100644
@@ -32,14 +32,6 @@ Limitations
   is enabled.
 
 
-Installation
-------------
-
-To build DPDK with CRYTPO_SCHEDULER_PMD the user is required to set
-CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y in config/common_base, and
-recompile DPDK
-
-
 Initialization
 --------------
 
doc/guides/cryptodevs/snow3g.rst +1 -9
index e0cddc2d77..13341c39c4 100644
@@ -88,14 +88,6 @@ In order to enable this virtual crypto PMD, user must:
 
 * Build the multi buffer library (explained in Installation section).
 
-* Build DPDK as follows:
-
-.. code-block:: console
-
-	make config T=x86_64-native-linux-gcc
-	sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_SNOW3G\)=n,\1=y,' build/.config
-	make
-
 To use the PMD in an application, user must:
 
 * Call rte_vdev_init("crypto_snow3g") within the application.
@@ -115,5 +107,5 @@ Example:
 
 .. code-block:: console
 
-    ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_snow3g,socket_id=0,max_nb_sessions=128" \
+    ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_snow3g,socket_id=0,max_nb_sessions=128" \
     -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "snow3g-uea2"
doc/guides/cryptodevs/virtio.rst +5 -15
index 2c46bda866..83d8e32397 100644
@@ -83,27 +83,17 @@ The unit test cases can be tested as below:
 .. code-block:: console
 
     reserve enough huge pages
-    cd to the top-level DPDK directory
-    export RTE_TARGET=x86_64-native-linux-gcc
-    export RTE_SDK=`pwd`
-    cd to app/test
-    type the command "make" to compile
-    run the tests with "./test"
-    type the command "cryptodev_virtio_autotest" to test
+    cd to <build_dir>
+    meson test cryptodev_virtio_autotest
 
 The performance can be tested as below:
 
 .. code-block:: console
 
     reserve enough huge pages
-    cd to the top-level DPDK directory
-    export RTE_TARGET=x86_64-native-linux-gcc
-    export RTE_SDK=`pwd`
-    cd to app/test-crypto-perf
-    type the command "make" to compile
-    run the tests with the following command:
-
-    ./dpdk-test-crypto-perf -l 0,1 -- --devtype crypto_virtio \
+    cd to <build_dir>
+
+    ./app/dpdk-test-crypto-perf -l 0,1 -- --devtype crypto_virtio \
         --ptest throughput --optype cipher-then-auth --cipher-algo aes-cbc \
         --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac \
         --auth-op generate --auth-key-sz 64 --digest-sz 12 \
doc/guides/cryptodevs/zuc.rst +1 -9
index 9b51ba141d..907840ef05 100644
@@ -88,14 +88,6 @@ In order to enable this virtual crypto PMD, user must:
 
 * Build the multi buffer library (explained in Installation section).
 
-* Build DPDK as follows:
-
-.. code-block:: console
-
-	make config T=x86_64-native-linux-gcc
-	sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_ZUC\)=n,\1=y,' build/.config
-	make
-
 To use the PMD in an application, user must:
 
 * Call rte_vdev_init("crypto_zuc") within the application.
@@ -115,5 +107,5 @@ Example:
 
 .. code-block:: console
 
-    ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_zuc,socket_id=0,max_nb_sessions=128" \
+    ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_zuc,socket_id=0,max_nb_sessions=128" \
     -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "zuc-eea3"
Signature · 1 line
2.17.1
#145 lore raw

PATCH v3 24/37 doc: remove references to make in eventdev guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/eventdevs/dpaa.rst      | 20 --------------------
 doc/guides/eventdevs/dpaa2.rst     | 20 --------------------
 doc/guides/eventdevs/octeontx.rst  | 24 ------------------------
 doc/guides/eventdevs/octeontx2.rst |  8 --------
 4 files changed, 72 deletions(-)
doc/guides/eventdevs/dpaa.rst +0 -20
index be68c6da6f..6fbee91d9e 100644
@@ -43,26 +43,6 @@ Currently supported by DPDK:
 Pre-Installation Configuration
 ------------------------------
 
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-Please note that enabling debugging options may affect system performance.
-
-- ``CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV`` (default ``y``)
-
-  Toggle compilation of the ``librte_pmd_dpaa_event`` driver.
-
-Driver Compilation
-~~~~~~~~~~~~~~~~~~
-
-To compile the DPAA EVENTDEV PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
-
-   cd <DPDK-source-directory>
-   make config T=arm64-dpaa-linux-gcc install
 
 Initialization
 --------------
doc/guides/eventdevs/dpaa2.rst +0 -20
index 835767f98d..b992ae649e 100644
@@ -52,26 +52,6 @@ Currently supported by DPDK:
 Pre-Installation Configuration
 ------------------------------
 
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-Please note that enabling debugging options may affect system performance.
-
-- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV`` (default ``y``)
-
-  Toggle compilation of the ``lrte_pmd_dpaa2_event`` driver.
-
-Driver Compilation
-~~~~~~~~~~~~~~~~~~
-
-To compile the DPAA2 EVENTDEV PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
-
-   cd <DPDK-source-directory>
-   make config T=arm64-dpaa-linux-gcc install
 
 Initialization
 --------------
doc/guides/eventdevs/octeontx.rst +0 -24
index 9a3646db0d..f7a4cdd586 100644
@@ -41,30 +41,6 @@ Prerequisites
 
 See :doc:`../platform/octeontx` for setup information.
 
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-Please note that enabling debugging options may affect system performance.
-
-- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF`` (default ``y``)
-
-  Toggle compilation of the ``librte_pmd_octeontx_ssovf`` driver.
-
-Driver Compilation
-~~~~~~~~~~~~~~~~~~
-
-To compile the OCTEON TX SSOVF PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
-
-   cd <DPDK-source-directory>
-   make config T=arm64-thunderx-linux-gcc install
-
 
 Initialization
 --------------
doc/guides/eventdevs/octeontx2.rst +0 -8
index 6502f6415f..7f9eceb01f 100644
@@ -47,14 +47,6 @@ Prerequisites and Compilation procedure
 Pre-Installation Configuration
 ------------------------------
 
-Compile time Config Options
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The following option can be modified in the ``config`` file.
-
-- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV`` (default ``y``)
-
-  Toggle compilation of the ``librte_pmd_octeontx2_event`` driver.
 
 Runtime Config Options
 ~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.17.1
#146 lore raw

PATCH v3 25/37 doc: remove references to make in FreeBSD gsg guide

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/freebsd_gsg/build_dpdk.rst | 2 +-
 doc/guides/freebsd_gsg/intro.rst      | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
doc/guides/freebsd_gsg/build_dpdk.rst +1 -1
index e31c966b98..1e5a8cfe9e 100644
@@ -122,7 +122,7 @@ up time.  This can be achieved by placing lines similar to the following into
 
 An error such as::
 
-    kldload: can't load ./x86_64-native-freebsd-gcc/kmod/contigmem.ko:
+    kldload: can't load ./<build_dir>/kernel/freebsd/contigmem.ko:
              Exec format error
 
 is generally attributed to not having enough contiguous memory
doc/guides/freebsd_gsg/intro.rst +2 -2
index 63160ce64f..b2e57909ee 100644
@@ -39,8 +39,8 @@ The following is a list of DPDK documents in the suggested reading order:
         specifically in a Linux* application (linux) environment
 
     *   The content of the DPDK, the build system (including the commands
-        that can be used in the root DPDK Makefile to build the development
-        kit and an application) and guidelines for porting an application
+        that can be used to build the development kit and an application)
+        and guidelines for porting an application
 
     *   Optimizations used in the software and those that should be considered
         for new development
Signature · 1 line
2.17.1
#147 lore raw

PATCH v3 26/37 doc: remove references to make in howto guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/howto/lm_bond_virtio_sriov.rst     |  4 +--
 doc/guides/howto/lm_virtio_vhost_user.rst     |  4 +--
 doc/guides/howto/packet_capture_framework.rst | 21 +++------------
 doc/guides/howto/pvp_reference_benchmark.rst  | 27 +++++--------------
 doc/guides/howto/vfd.rst                      |  4 +--
 .../virtio_user_for_container_networking.rst  |  2 +-
 6 files changed, 16 insertions(+), 46 deletions(-)
doc/guides/howto/lm_bond_virtio_sriov.rst +2 -2
index 07563b3e24..02ba1cdf5d 100644
@@ -591,7 +591,7 @@ Set up DPDK in the Virtual Machine
    rmmod virtio-pci ixgbevf
 
    modprobe uio
-   insmod /root/dpdk/x86_64-default-linux-gcc/kmod/igb_uio.ko
+   insmod /root/dpdk/<build_dir>/kernel/linux/igb_uio/igb_uio.ko
 
    /root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:03.0
    /root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:04.0
@@ -613,7 +613,7 @@ Run testpmd in the Virtual Machine.
 
    # use for bonding of virtio and vf tests in VM
 
-   /root/dpdk/x86_64-default-linux-gcc/app/testpmd \
+   /root/dpdk/<build_dir>/app/dpdk-testpmd \
    -l 0-3 -n 4 --socket-mem 350 --  --i --port-topology=chained
 
 .. _lm_bond_virtio_sriov_switch_conf:
doc/guides/howto/lm_virtio_vhost_user.rst +2 -2
index ecb7832906..330ff5a9c8 100644
@@ -421,7 +421,7 @@ setup_dpdk_virtio_in_vm.sh
    rmmod virtio-pci
 
    modprobe uio
-   insmod /root/dpdk/x86_64-default-linux-gcc/kmod/igb_uio.ko
+   insmod /root/dpdk/<build_dir>/kernel/linux/igb_uio/igb_uio.ko
 
    /root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:03.0
    /root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:04.0
@@ -437,5 +437,5 @@ run_testpmd_in_vm.sh
    # Run testpmd for use with vhost_user sample app.
    # test system has 8 cpus (0-7), use cpus 2-7 for VM
 
-   /root/dpdk/x86_64-default-linux-gcc/app/testpmd \
+   /root/dpdk/<build_dir>/app/dpdk-testpmd \
    -l 0-5 -n 4 --socket-mem 350 -- --burst=64 --i
doc/guides/howto/packet_capture_framework.rst +3 -18
index 946a21c8ed..d457989607 100644
@@ -52,11 +52,7 @@ Some things to note:
   initialization code. Refer to the ``app/test-pmd/testpmd.c`` code and look
   for ``pdump`` keyword to see how this is done.
 
-* The ``dpdk-pdump`` tool depends on the libpcap based PMD which is disabled
-  by default in the build configuration files, owing to an external dependency
-  on the libpcap development files. Once the libpcap development files are
-  installed, the libpcap based PMD can be enabled by setting
-  ``CONFIG_RTE_LIBRTE_PMD_PCAP=y`` and recompiling the DPDK.
+* The ``dpdk-pdump`` tool depends on the libpcap based PMD.
 
 
 Test Environment
@@ -73,17 +69,6 @@ for packet capturing on the DPDK port in
    Packet capturing on a DPDK port using the dpdk-pdump tool.
 
 
-Configuration
--------------
-
-Modify the DPDK primary application to initialize the packet capture framework
-as mentioned in the above notes and enable the following config options and
-build DPDK::
-
-     CONFIG_RTE_LIBRTE_PMD_PCAP=y
-     CONFIG_RTE_LIBRTE_PDUMP=y
-
-
 Running the Application
 -----------------------
 
@@ -93,11 +78,11 @@ inspect them using ``tcpdump``.
 
 #. Launch testpmd as the primary application::
 
-     sudo ./app/testpmd -c 0xf0 -n 4 -- -i --port-topology=chained
+     sudo ./<build_dir>/app/dpdk-testpmd -c 0xf0 -n 4 -- -i --port-topology=chained
 
 #. Launch the pdump tool as follows::
 
-     sudo ./build/app/dpdk-pdump -- \
+     sudo ./<build_dir>/app/dpdk-pdump -- \
           --pdump 'port=0,queue=*,rx-dev=/tmp/capture.pcap'
 
 #. Send traffic to dpdk_port0 from traffic generator.
doc/guides/howto/pvp_reference_benchmark.rst +6 -21
index 64b1f4d8ec..1d4a4b0232 100644
@@ -99,14 +99,7 @@ Build Qemu:
 DPDK build
 ~~~~~~~~~~
 
-Build DPDK:
-
-   .. code-block:: console
-
-      git clone git://dpdk.org/dpdk
-      cd dpdk
-      export RTE_SDK=$PWD
-      make install T=x86_64-native-linux-gcc DESTDIR=install
+See :doc:`../linux_gsg/build_dpdk` for details.
 
 
 Testpmd launch
@@ -117,7 +110,7 @@ Testpmd launch
    .. code-block:: console
 
       modprobe vfio-pci
-      $RTE_SDK/install/sbin/dpdk-devbind -b vfio-pci 0000:11:00.0 0000:11:00.1
+      ./dpdk/usertools/dpdk-devbind -b vfio-pci 0000:11:00.0 0000:11:00.1
 
    .. Note::
 
@@ -129,7 +122,7 @@ Testpmd launch
 
    .. code-block:: console
 
-      $RTE_SDK/install/bin/testpmd -l 0,2,3,4,5 --socket-mem=1024 -n 4 \
+      ./dpdk/<build_dir>/app/dpdk-testpmd -l 0,2,3,4,5 --socket-mem=1024 -n 4 \
           --vdev 'net_vhost0,iface=/tmp/vhost-user1' \
           --vdev 'net_vhost1,iface=/tmp/vhost-user2' -- \
           --portmask=f -i --rxq=1 --txq=1 \
@@ -309,18 +302,10 @@ Guest tuning
         echo "obase=16;$(( 0x$(cat $i) & ~$clear_mask ))" | bc > $i
       done
 
-
 DPDK build
 ~~~~~~~~~~
 
-Build DPDK:
-
-   .. code-block:: console
-
-      git clone git://dpdk.org/dpdk
-      cd dpdk
-      export RTE_SDK=$PWD
-      make install T=x86_64-native-linux-gcc DESTDIR=install
+See :doc:`../linux_gsg/build_dpdk` for details.
 
 
 Testpmd launch
@@ -340,13 +325,13 @@ Bind the virtio-net devices to DPDK:
 
    .. code-block:: console
 
-      $RTE_SDK/usertools/dpdk-devbind.py -b vfio-pci 0000:00:10.0 0000:00:11.0
+      ./dpdk/usertools/dpdk-devbind.py -b vfio-pci 0000:00:10.0 0000:00:11.0
 
 Start testpmd:
 
    .. code-block:: console
 
-      $RTE_SDK/install/bin/testpmd -l 0,1,2 --socket-mem 1024 -n 4 \
+      ./dpdk/<build_dir>/app/dpdk-testpmd -l 0,1,2 --socket-mem 1024 -n 4 \
           --proc-type auto --file-prefix pg -- \
           --portmask=3 --forward-mode=macswap --port-topology=chained \
           --disable-rss -i --rxq=1 --txq=1 \
doc/guides/howto/vfd.rst +2 -2
index 0ec0a0478d..5a62e6ff5a 100644
@@ -83,7 +83,7 @@ The typical procedure to achieve this is as follows:
 
 #. Run a DPDK application on the PF in the host::
 
-      testpmd -l 0-7 -n 4 -- -i --txqflags=0
+      dpdk-testpmd -l 0-7 -n 4 -- -i --txqflags=0
 
 #. Bind the VF port to ``igb_uio`` in the VM::
 
@@ -91,7 +91,7 @@ The typical procedure to achieve this is as follows:
 
 #. Run a DPDK application on the VF in the VM::
 
-      testpmd -l 0-7 -n 4 -- -i --txqflags=0
+      dpdk-testpmd -l 0-7 -n 4 -- -i --txqflags=0
 
 
 Common functions of IXGBE and I40E
doc/guides/howto/virtio_user_for_container_networking.rst +1 -1
index 412b29664b..5eab360a1c 100644
@@ -64,7 +64,7 @@ some minor changes.
 	FROM ubuntu:latest
 	WORKDIR /usr/src/dpdk
 	COPY . /usr/src/dpdk
-	ENV PATH "$PATH:/usr/src/dpdk/x86_64-native-linux-gcc/app/"
+	ENV PATH "$PATH:/usr/src/dpdk/<build_dir>/app/"
 	EOT
 
 #. Build a Docker image.
Signature · 1 line
2.17.1
#148 lore raw

PATCH v3 27/37 doc: remove references to make in Linux gsg guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/linux_gsg/build_dpdk.rst           | 84 +++----------------
 doc/guides/linux_gsg/build_sample_apps.rst    | 69 +--------------
 .../linux_gsg/cross_build_dpdk_for_arm64.rst  | 48 +----------
 doc/guides/linux_gsg/enable_func.rst          | 13 ++-
 doc/guides/linux_gsg/intro.rst                |  2 +-
 doc/guides/linux_gsg/linux_drivers.rst        | 18 ++--
 doc/guides/linux_gsg/sys_reqs.rst             | 16 +---
 7 files changed, 40 insertions(+), 210 deletions(-)
doc/guides/linux_gsg/build_dpdk.rst +12 -72
index c536e354ef..85d04520bf 100644
@@ -31,7 +31,7 @@ The DPDK is composed of several directories:
 
 *   examples: Source code of DPDK application examples
 
-*   config, buildtools, mk: Framework-related makefiles, scripts and configuration
+*   config, buildtools: Framework-related scripts and configuration
 
 Compiling and Installing DPDK System-wide
 -----------------------------------------
@@ -39,11 +39,6 @@ Compiling and Installing DPDK System-wide
 DPDK can be configured, built and installed on your system using the tools
 ``meson`` and ``ninja``.
 
-.. note::
-
-  The older makefile-based build system used in older DPDK releases is
-  still present and its use is described in section
-  `Installation of DPDK Target Environment using Make`_.
 
 DPDK Configuration
 ~~~~~~~~~~~~~~~~~~
@@ -81,6 +76,8 @@ and the last step causing the dynamic loader `ld.so` to update its cache to take
    distributions, `/usr/local/lib` and `/usr/local/lib64` should be added
    to a file in `/etc/ld.so.conf.d/` before running `ldconfig`.
 
+.. _adjusting_build_options:
+
 
 Adjusting Build Options
 ~~~~~~~~~~~~~~~~~~~~~~~
@@ -117,6 +114,9 @@ dependencies are met on the current system are built.
 When `-Dexamples=all` is set as a meson option, meson will check each example application to see if it can be built,
 and add all which can be built to the list of tasks in the ninja build configuration file.
 
+.. _building_app_using_installed_dpdk:
+
+
 Building Applications Using Installed DPDK
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -140,11 +140,12 @@ and the sources for that build are stored in ``$(SRCS-y)``.
 
 .. note::
 
-   Unlike with the older make build system, the meson system is not
-   designed to be used directly from a build directory. Instead it is
-   recommended that it be installed either system-wide or to a known
-   location in the user's home directory. The install location can be set
-   using the `--prefix` meson option (default: `/usr/local`).
+   Unlike with the make build system present used in older DPDK releases,
+   the meson system is not designed to be used directly from a build
+   directory. Instead it is recommended that it be installed either
+   system-wide or to a known location in the user's home directory.
+   The install location can be set using the `--prefix` meson option
+   (default: `/usr/local`).
 
 an equivalent build recipe for a simple DPDK application using meson as a
 build system is shown below:
@@ -156,64 +157,3 @@ build system is shown below:
    dpdk = dependency('libdpdk')
    sources = files('main.c')
    executable('dpdk-app', sources, dependencies: dpdk)
-
-
-Installation of DPDK Target Environment using Make
---------------------------------------------------
-
-.. note::
-
-   The building of DPDK using make will be deprecated in a future release. It
-   is therefore recommended that DPDK installation is done using meson and
-   ninja as described above.
-
-Get a native target environment automatically::
-
-   make defconfig O=mybuild
-
-.. note::
-
-    Within the configuration files, the ``RTE_MACHINE`` configuration value is set to native,
-    which means that the compiled software is tuned for the platform on which it is built.
-
-Or get a specific target environment::
-
-   make config T=x86_64-native-linux-gcc O=mybuild
-
-The format of a DPDK target is "ARCH-MACHINE-EXECENV-TOOLCHAIN".
-Available targets can be found with::
-
-   make help
-
-Customize the target configuration in the generated ``.config`` file.
-Example for enabling the pcap PMD::
-
-   sed -ri 's,(PMD_PCAP=).*,\1y,' mybuild/.config
-
-Compile the target::
-
-   make -j4 O=mybuild
-
-.. warning::
-
-    Any kernel modules to be used, e.g. ``igb_uio``, ``kni``, must be compiled with the
-    same kernel as the one running on the target.
-    If the DPDK is not being built on the target machine,
-    the ``RTE_KERNELDIR`` environment variable should be used to point the compilation at a copy of the kernel version to be used on the target machine.
-
-Install the target in a separate directory::
-
-   make install O=mybuild DESTDIR=myinstall prefix=
-
-The environment is ready to build a DPDK application::
-
-   RTE_SDK=$(pwd)/myinstall/share/dpdk RTE_TARGET=x86_64-native-linux-gcc make -C myapp
-
-In addition, the make clean command can be used to remove any existing compiled files for a subsequent full, clean rebuild of the code.
-
-Browsing the Installed DPDK Environment Target
-----------------------------------------------
-
-Once a target is created it contains all libraries, including poll-mode drivers, and header files for the DPDK environment that are required to build customer applications.
-In addition, the test applications are built under the app directory, which may be used for testing.
-A kmod  directory is also present that contains kernel modules which may be loaded if needed.
doc/guides/linux_gsg/build_sample_apps.rst +4 -65

93 lines not on this page · raw message

doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst +3 -45

63 lines not on this page · raw message

doc/guides/linux_gsg/enable_func.rst +5 -8
index b2bda80bb7..08f55d8543 100644
@@ -41,7 +41,9 @@ Enabling HPET in the DPDK
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 By default, HPET support is disabled in the DPDK build configuration files.
-To use HPET, the ``CONFIG_RTE_LIBEAL_USE_HPET`` setting should be changed to ``y``, which will enable the HPET settings at compile time.
+To use HPET, use the following meson build option which will enable the HPET settings at compile time::
+
+   meson configure -Duse_hpet=true
 
 For an application to use the ``rte_get_hpet_cycles()`` and ``rte_get_hpet_hz()`` API calls,
 and optionally to make the HPET the default time source for the rte_timer library,
@@ -128,13 +130,8 @@ Loading the DPDK KNI Kernel Module
 ----------------------------------
 
 To run the DPDK Kernel NIC Interface (KNI) sample application, an extra kernel module (the kni module) must be loaded into the running kernel.
-The module is found in the kmod sub-directory of the DPDK target directory.
-Similar to the loading of the ``igb_uio`` module, this module should be loaded using the insmod command as shown below
-(assuming that the current directory is the DPDK target directory):
-
-.. code-block:: console
-
-   insmod kmod/rte_kni.ko
+The module is found in the kernel/linux sub-directory of the DPDK build directory.
+This can be enabled in the same way as the ``igb_uio`` module, please see :ref:`load_uio` for details.
 
 .. note::
 
doc/guides/linux_gsg/intro.rst +1 -1
index 94877f4ae2..890169e97f 100644
@@ -23,7 +23,7 @@ The following is a list of DPDK documents in the suggested reading order:
 
     *   The software architecture and how to use it (through examples), specifically in a Linux application (linux) environment
 
-    *   The content of the DPDK, the build system (including the commands that can be used in the root DPDK Makefile to build the development kit and
+    *   The content of the DPDK, the build system (including the commands that can be used to build the development kit and
         an application) and guidelines for porting an application
 
     *   Optimizations used in the software and those that should be considered for new development
doc/guides/linux_gsg/linux_drivers.rst +11 -7
index 185074013a..349be1c906 100644
@@ -12,6 +12,9 @@ Different PMDs may require different kernel drivers in order to work properly.
 Depends on the PMD being used, a corresponding kernel driver should be load
 and bind to the network ports.
 
+.. _load_uio:
+
+
 UIO
 ---
 
@@ -28,19 +31,20 @@ can provide the uio capability. This module can be loaded using the command:
     ``uio_pci_generic`` module doesn't support the creation of virtual functions.
 
 As an alternative to the ``uio_pci_generic``, the DPDK also includes the igb_uio
-module which can be found in the kmod subdirectory referred to above. It can
+module which can be found in the kernel/linux subdirectory referred to above. It can
 be loaded as shown below:
 
 .. code-block:: console
 
     sudo modprobe uio
-    sudo insmod kmod/igb_uio.ko
+    sudo insmod <build_dir>/kernel/linux/igb_uio/igb_uio.ko
 
 .. note::
 
-   ``igb_uio`` module is disabled by default starting from ``DPDK v20.02``.
-   To build it, the config option ``CONFIG_RTE_EAL_IGB_UIO`` should be enabled.
-   It is planned to move ``igb_uio`` module to a different git repository.
+   Building DPDK Linux kernel modules is disabled by default starting from DPDK v20.02.
+   To enable them again, the config option "enable_kmods" needs to be set in the meson
+   build configuration. See :ref:`adjusting_build_options` for details on how to set/clear
+   build options. It is planned to move ``igb_uio`` module to a different git repository.
 
 .. note::
 
@@ -104,11 +108,11 @@ parameter ``--vfio-vf-token``.
     3. echo 2 > /sys/bus/pci/devices/0000:86:00.0/sriov_numvfs
 
     4. Start the PF:
-        ./x86_64-native-linux-gcc/app/testpmd -l 22-25 -n 4 -w 86:00.0 \
+        ./<build_dir>/app/dpdk-testpmd -l 22-25 -n 4 -w 86:00.0 \
          --vfio-vf-token=14d63f20-8445-11ea-8900-1f9ce7d5650d --file-prefix=pf -- -i
 
     5. Start the VF:
-        ./x86_64-native-linux-gcc/app/testpmd -l 26-29 -n 4 -w 86:02.0 \
+        ./<build_dir>/app/dpdk-testpmd -l 26-29 -n 4 -w 86:02.0 \
          --vfio-vf-token=14d63f20-8445-11ea-8900-1f9ce7d5650d --file-prefix=vf0 -- -i
 
 Also, to use VFIO, both kernel and BIOS must support and be configured to use IO virtualization (such as Intel® VT-d).
doc/guides/linux_gsg/sys_reqs.rst +4 -12
index a124656bcb..625fb58066 100644
@@ -37,17 +37,13 @@ Compilation of the DPDK
     The setup commands and installed packages needed on various systems may be different.
     For details on Linux distributions and the versions tested, please consult the DPDK Release Notes.
 
-*   General development tools including ``make``, and a supported C compiler such as ``gcc`` (version 4.9+) or ``clang`` (version 3.4+).
+*   General development tools including a supported C compiler such as gcc (version 4.9+) or clang (version 3.4+).
 
     * For RHEL/Fedora systems these can be installed using ``dnf groupinstall "Development Tools"``
 
     * For Ubuntu/Debian systems these can be installed using ``apt install build-essential``
 
-*   Python, recommended version 3.5+.
-
-    * Python v3.5+ is needed to build DPDK using meson and ninja
-
-    * Python 2.7+ or 3.2+, to use various helper scripts included in the DPDK package.
+*   Python, v3.5 or later.
 
 *   Meson (version 0.47.1+) and ninja
 
@@ -82,12 +78,8 @@ Compilation of the DPDK
 **Additional Libraries**
 
 A number of DPDK components, such as libraries and poll-mode drivers (PMDs) have additional dependencies.
-For DPDK builds using meson, the presence or absence of these dependencies will be
-automatically detected enabling or disabling the relevant components appropriately.
-
-For builds using make, these components are disabled in the default configuration and
-need to be enabled manually by changing the relevant setting to "y" in the build configuration file
-i.e. the ``.config`` file in the build folder.
+For DPDK builds, the presence or absence of these dependencies will be automatically detected
+enabling or disabling the relevant components appropriately.
 
 In each case, the relevant library development package (``-devel`` or ``-dev``) is needed to build the DPDK components.
 
Signature · 1 line
2.17.1
#149 lore raw

PATCH v3 28/37 doc: remove references to make in mempool guides

In reply to Ciara Power

Make is no longer supported for compiling DPDK, references are now removed in the documentation.

---
 doc/guides/mempool/octeontx.rst  | 28 +++-------------------------
 doc/guides/mempool/octeontx2.rst | 10 +---------
 2 files changed, 4 insertions(+), 34 deletions(-)
doc/guides/mempool/octeontx.rst +3 -25
index dfa1993e19..33c40d5b17 100644
@@ -30,33 +30,11 @@ Prerequisites
 
 See :doc: `../platform/octeontx.rst` for setup information.
 
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-Please note that enabling debugging options may affect system performance.
-
-- ``CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS`` ( set to ``octeontx_fpavf``)
-
-  Set default mempool ops to octeontx_fpavf.
-
-- ``CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL`` (default ``y``)
-
-  Toggle compilation of the ``librte_mempool_octeontx`` driver.
 
 Driver Compilation
-~~~~~~~~~~~~~~~~~~
-
-To compile the OCTEON TX FPAVF MEMPOOL PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
+------------------
 
-   cd <DPDK-source-directory>
-   make config T=arm64-thunderx-linux-gcc
+See :doc:`../linux_gsg/build_dpdk` for more information on compiling DPDK.
 
 
 Initialization
@@ -70,5 +48,5 @@ Example:
 
 .. code-block:: console
 
-    ./build/app/test -c 0xf --base-virtaddr=0x100000000000 \
+    ./<build_dir>/app/test/dpdk-test -c 0xf --base-virtaddr=0x100000000000 \
                         --mbuf-pool-ops-name="octeontx_fpavf"
doc/guides/mempool/octeontx2.rst +1 -9
index 49b45a04e8..53f09a52db 100644
@@ -29,14 +29,6 @@ Prerequisites and Compilation procedure
 Pre-Installation Configuration
 ------------------------------
 
-Compile time Config Options
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The following option can be modified in the ``config`` file.
-
-- ``CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL`` (default ``y``)
-
-  Toggle compilation of the ``librte_mempool_octeontx2`` driver.
 
 Runtime Config Options
 ~~~~~~~~~~~~~~~~~~~~~~
@@ -97,4 +89,4 @@ Standalone mempool device
 
    Example command to run ``mempool_autotest`` test with standalone OCTEONTX2 NPA device::
 
-     echo "mempool_autotest" | build/app/test -c 0xf0 --mbuf-pool-ops-name="octeontx2_npa"
+     echo "mempool_autotest" | <build_dir>/app/test/dpdk-test -c 0xf0 --mbuf-pool-ops-name="octeontx2_npa"
Signature · 1 line
2.17.1