remove make support in DPDK
Subsystems (12)
PATCH v5 16/20 doc: remove references to make from app guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
--- doc/guides/sample_app_ug/bbdev_app.rst | 34 ++------ doc/guides/sample_app_ug/cmd_line.rst | 2 +- doc/guides/sample_app_ug/compiling.rst | 83 +++++++------------ doc/guides/sample_app_ug/dist_app.rst | 4 +- doc/guides/sample_app_ug/ethtool.rst | 2 +- .../sample_app_ug/eventdev_pipeline.rst | 3 +- doc/guides/sample_app_ug/fips_validation.rst | 10 +-- doc/guides/sample_app_ug/flow_classify.rst | 4 +- doc/guides/sample_app_ug/flow_filtering.rst | 25 +----- doc/guides/sample_app_ug/hello_world.rst | 2 +- doc/guides/sample_app_ug/ioat.rst | 6 +- doc/guides/sample_app_ug/ip_frag.rst | 6 +- doc/guides/sample_app_ug/ip_pipeline.rst | 4 +- doc/guides/sample_app_ug/ip_reassembly.rst | 9 +- doc/guides/sample_app_ug/ipsec_secgw.rst | 14 +--- doc/guides/sample_app_ug/ipv4_multicast.rst | 4 +- doc/guides/sample_app_ug/keep_alive.rst | 4 +- .../sample_app_ug/kernel_nic_interface.rst | 14 ++-- doc/guides/sample_app_ug/l2_forward_cat.rst | 4 +- .../sample_app_ug/l2_forward_crypto.rst | 4 +- doc/guides/sample_app_ug/l2_forward_event.rst | 10 +-- .../sample_app_ug/l2_forward_job_stats.rst | 4 +- .../sample_app_ug/l2_forward_real_virtual.rst | 6 +- doc/guides/sample_app_ug/l3_forward.rst | 10 +-- .../sample_app_ug/l3_forward_access_ctrl.rst | 6 +- doc/guides/sample_app_ug/l3_forward_graph.rst | 4 +- .../sample_app_ug/l3_forward_power_man.rst | 14 ++-- doc/guides/sample_app_ug/link_status_intr.rst | 4 +- doc/guides/sample_app_ug/multi_process.rst | 20 ++--- doc/guides/sample_app_ug/ntb.rst | 2 +- doc/guides/sample_app_ug/packet_ordering.rst | 3 +- .../sample_app_ug/performance_thread.rst | 44 +++------- doc/guides/sample_app_ug/ptpclient.rst | 9 +- doc/guides/sample_app_ug/qos_metering.rst | 2 +- doc/guides/sample_app_ug/qos_scheduler.rst | 10 +-- doc/guides/sample_app_ug/rxtx_callbacks.rst | 9 +- doc/guides/sample_app_ug/server_node_efd.rst | 2 +- doc/guides/sample_app_ug/service_cores.rst | 23 +---- doc/guides/sample_app_ug/skeleton.rst | 2 +- doc/guides/sample_app_ug/tep_termination.rst | 43 +++------- doc/guides/sample_app_ug/test_pipeline.rst | 4 +- doc/guides/sample_app_ug/timer.rst | 2 +- doc/guides/sample_app_ug/vdpa.rst | 4 +- doc/guides/sample_app_ug/vhost.rst | 11 +-- doc/guides/sample_app_ug/vhost_blk.rst | 2 +- doc/guides/sample_app_ug/vhost_crypto.rst | 2 +- .../sample_app_ug/vm_power_management.rst | 34 ++++---- .../sample_app_ug/vmdq_dcb_forwarding.rst | 8 +- doc/guides/sample_app_ug/vmdq_forwarding.rst | 8 +- doc/guides/testpmd_app_ug/run_app.rst | 6 +- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 +- 51 files changed, 199 insertions(+), 356 deletions(-)
doc/guides/sample_app_ug/bbdev_app.rst +8 -26
@@ -31,30 +31,12 @@ Limitations Compiling the Application ------------------------- -#. DPDK needs to be built with ``baseband_turbo_sw`` PMD driver enabled along - with ``FLEXRAN SDK`` Libraries. Refer to *SW Turbo Poll Mode Driver* - documentation for more details on this. +DPDK needs to be built with ``baseband_turbo_sw`` PMD driver enabled along +with ``FLEXRAN SDK`` Libraries. Refer to *SW Turbo Poll Mode Driver* +documentation for more details on this. -#. Go to the example directory: +To compile the sample application see :doc:`compiling`. - .. code-block:: console - - export RTE_SDK=/path/to/rte_sdk - cd ${RTE_SDK}/examples/bbdev_app - -#. Set the target (a default target is used if not specified). For example: - - .. code-block:: console - - export RTE_TARGET=x86_64-native-linux-gcc - - See the *DPDK Getting Started Guide* for possible RTE_TARGET values. - -#. Build the application: - - .. code-block:: console - - make Running the Application -----------------------
@@ -63,8 +45,8 @@ The application accepts a number of command line options: .. code-block:: console - $ ./build/bbdev [EAL options] -- [-e ENCODING_CORES] [-d DECODING_CORES] / - [-p ETH_PORT_ID] [-b BBDEV_ID] + $ ./<build_dir>/examples/dpdk-bbdev [EAL options] -- [-e ENCODING_CORES] / + [-d DECODING_CORES] [-p ETH_PORT_ID] [-b BBDEV_ID] where:
@@ -84,8 +66,8 @@ issue the command: .. code-block:: console - $ ./build/bbdev --vdev='baseband_turbo_sw' -w <NIC0PCIADDR> -c 0x38 --socket-mem=2,2 \ - --file-prefix=bbdev -- -e 0x10 -d 0x20 + $ ./<build_dir>/examples/dpdk-bbdev --vdev='baseband_turbo_sw' -w <NIC0PCIADDR> \ + -c 0x38 --socket-mem=2,2 --file-prefix=bbdev -- -e 0x10 -d 0x20 where, NIC0PCIADDR is the PCI address of the Rx port
doc/guides/sample_app_ug/cmd_line.rst +1 -1
@@ -52,7 +52,7 @@ To run the application in linux environment, issue the following command: .. code-block:: console - $ ./build/cmdline -l 0-3 -n 4 + $ ./<build_dir>/examples/dpdk-cmdline -l 0-3 -n 4 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/compiling.rst +29 -54
129 lines not on this page · raw message
doc/guides/sample_app_ug/dist_app.rst +2 -2
@@ -42,7 +42,7 @@ Running the Application .. code-block:: console - ./build/distributor_app [EAL options] -- -p PORTMASK + ./<build-dir>/examples/dpdk-distributor [EAL options] -- -p PORTMASK where,
@@ -53,7 +53,7 @@ Running the Application .. code-block:: console - $ ./build/distributor_app -l 1-9,22 -n 4 -- -p f + $ ./<build-dir>/examples/dpdk-distributor -l 1-9,22 -n 4 -- -p f #. Refer to the DPDK Getting Started Guide for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/ethtool.rst +1 -1
@@ -24,7 +24,7 @@ The only available options are the standard ones for the EAL: .. code-block:: console - ./ethtool-app/${RTE_TARGET}/ethtool [EAL options] + ./<build_dir>/examples/dpdk-ethtool [EAL options] Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL)
doc/guides/sample_app_ug/eventdev_pipeline.rst +2 -1
@@ -46,7 +46,8 @@ these settings is shown below: .. code-block:: console - ./build/eventdev_pipeline --vdev event_sw0 -- -r1 -t1 -e4 -w FF00 -s4 -n0 -c32 -W1000 -D + ./<build_dir>/examples/dpdk-eventdev_pipeline --vdev event_sw0 -- -r1 -t1 / + -e4 -w FF00 -s4 -n0 -c32 -W1000 -D The application has some sanity checking built-in, so if there is a function (e.g.; the RX core) which doesn't have a cpu core mask assigned, the application
doc/guides/sample_app_ug/fips_validation.rst +4 -6
@@ -70,9 +70,7 @@ Compiling the Application * Compile Application - .. code-block:: console - - make -C examples/fips_validation + To compile the sample application see :doc:`compiling`. * Run ``dos2unix`` on the request files
@@ -92,7 +90,7 @@ The application requires a number of command line options: .. code-block:: console - ./fips_validation [EAL options] + ./dpdk-fips_validation [EAL options] -- --req-file FILE_PATH/FOLDER_PATH --rsp-file FILE_PATH/FOLDER_PATH [--cryptodev DEVICE_NAME] [--cryptodev-id ID] [--path-is-folder]
@@ -117,7 +115,7 @@ file for crypto_aesni_mb PMD, issue the command: .. code-block:: console - $ ./fips_validation --vdev crypto_aesni_mb -- + $ ./dpdk-fips_validation --vdev crypto_aesni_mb -- --req-file /PATH/TO/REQUEST/FILE.req --rsp-file ./PATH/TO/RESPONSE/FILE.rsp --cryptodev crypto_aesni_mb
@@ -126,7 +124,7 @@ data files in one folder for crypto_aesni_gcm PMD, issue the command: .. code-block:: console - $ ./fips_validation --vdev crypto_aesni_gcm0 -- + $ ./dpdk-fips_validation --vdev crypto_aesni_gcm0 -- --req-file /PATH/TO/REQUEST/FILE/FOLDER/ --rsp-file ./PATH/TO/RESPONSE/FILE/FOLDER/ --cryptodev-id 0 --path-is-folder
doc/guides/sample_app_ug/flow_classify.rst +2 -2
@@ -28,8 +28,8 @@ To run the example in a ``linux`` environment: .. code-block:: console - cd ~/dpdk/examples/flow_classify - ./build/flow_classify -c 4 -n 4 -- --rule_ipv4="../ipv4_rules_file.txt" + ./<build_dir>/examples/dpdk-flow_classify -c 4 -n 4 -- / + --rule_ipv4="../ipv4_rules_file.txt" Please refer to the *DPDK Getting Started Guide*, section :doc:`../linux_gsg/build_sample_apps`
doc/guides/sample_app_ug/flow_filtering.rst +2 -23
@@ -13,28 +13,7 @@ It is intended as a demonstration of the basic components RTE flow rules. Compiling the Application ------------------------- -To compile the application export the path to the DPDK source tree and go to -the example directory: - -.. code-block:: console - - export RTE_SDK=/path/to/rte_sdk - - cd ${RTE_SDK}/examples/flow_filtering - -Set the target, for example: - -.. code-block:: console - - export RTE_TARGET=x86_64-native-linux-gcc - -See the *DPDK Getting Started* Guide for possible ``RTE_TARGET`` values. - -Build the application as follows: - -.. code-block:: console - - make +To compile the sample application see :doc:`compiling`. Running the Application
@@ -44,7 +23,7 @@ To run the example in a ``linux`` environment: .. code-block:: console - ./build/flow -l 1 -n 1 + ./<build_dir>/examples/dpdk-flow_filtering -l 1 -n 1 Refer to *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/hello_world.rst +1 -1
@@ -21,7 +21,7 @@ To run the example in a linux environment: .. code-block:: console - $ ./build/helloworld -l 0-3 -n 4 + $ ./<build_dir>/examples/dpdk-helloworld -l 0-3 -n 4 Refer to *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/ioat.rst +3 -3
@@ -45,7 +45,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/ioatfwd [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>] + ./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>] [--[no-]mac-updating] where,
@@ -81,7 +81,7 @@ updating issue the command: .. code-block:: console - $ ./build/ioatfwd -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw + $ ./<build_dir>/examples/dpdk-ioat -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw To run the application in a Linux environment with 2 lcores (the master lcore, plus one forwarding core), 2 ports (ports 0 and 1), hardware copying and no MAC
@@ -89,7 +89,7 @@ updating issue the command: .. code-block:: console - $ ./build/ioatfwd -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw + $ ./<build_dir>/examples/dpdk-ioat -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/ip_frag.rst +3 -3
@@ -53,7 +53,7 @@ Application usage: .. code-block:: console - ./build/ip_fragmentation [EAL options] -- -p PORTMASK [-q NQ] + ./<build_dir>/examples/dpdk-ip_fragmentation [EAL options] -- -p PORTMASK [-q NQ] where:
@@ -65,7 +65,7 @@ To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) wi .. code-block:: console - ./build/ip_fragmentation -l 2,4 -n 3 -- -p 5 + ./<build_dir>/examples/dpdk-ip_fragmentation -l 2,4 -n 3 -- -p 5 EAL: coremask set to 14 EAL: Detected lcore 0 on socket 0 EAL: Detected lcore 1 on socket 1
@@ -94,7 +94,7 @@ To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with .. code-block:: console - ./build/ip_fragmentation -l 4 -n 3 -- -p 5 -q 2 + ./<build_dir>/examples/dpdk-ip_fragmentation -l 4 -n 3 -- -p 5 -q 2 To test the application, flows should be set up in the flow generator that match the values in the l3fwd_ipv4_route_array and/or l3fwd_ipv6_route_array table.
doc/guides/sample_app_ug/ip_pipeline.rst +2 -2
@@ -34,7 +34,7 @@ Running the application The application startup command line is:: - ip_pipeline [EAL_ARGS] -- [-s SCRIPT_FILE] [-h HOST] [-p PORT] + dpdk-ip_pipeline [EAL_ARGS] -- [-s SCRIPT_FILE] [-h HOST] [-p PORT] The application startup arguments are:
@@ -71,7 +71,7 @@ The following is an example command to run ip pipeline application configured fo .. code-block:: console - $ ./build/ip_pipeline -c 0x3 -- -s examples/route_ecmp.cli + $ ./<build_dir>/examples/dpdk-ip_pipeline -c 0x3 -- -s examples/route_ecmp.cli The application should start successfully and display as follows:
doc/guides/sample_app_ug/ip_reassembly.rst +5 -4
@@ -42,7 +42,7 @@ The application has a number of command line options: .. code-block:: console - ./build/ip_reassembly [EAL options] -- -p PORTMASK [-q NQ] [--maxflows=FLOWS>] [--flowttl=TTL[(s|ms)]] + ./<build_dir>/examples/dpdk-ip_reassembly [EAL options] -- -p PORTMASK [-q NQ] [--maxflows=FLOWS>] [--flowttl=TTL[(s|ms)]] where:
@@ -61,7 +61,7 @@ To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) wi .. code-block:: console - ./build/ip_reassembly -l 2,4 -n 3 -- -p 5 + ./<build_dir>/examples/dpdk-ip_reassembly -l 2,4 -n 3 -- -p 5 EAL: coremask set to 14 EAL: Detected lcore 0 on socket 0 EAL: Detected lcore 1 on socket 1
@@ -92,7 +92,7 @@ To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with .. code-block:: console - ./build/ip_reassembly -l 4 -n 3 -- -p 5 -q 2 + ./<build_dir>/examples/dpdk-ip_reassembly -l 4 -n 3 -- -p 5 -q 2 To test the application, flows should be set up in the flow generator that match the values in the l3fwd_ipv4_route_array and/or l3fwd_ipv6_route_array table.
@@ -231,7 +231,8 @@ Debug logging and Statistics Collection ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The RTE_LIBRTE_IP_FRAG_TBL_STAT controls statistics collection for the IP Fragment Table. -This macro is disabled by default. +This macro is disabled by default, but it can be enabled by modifying the appropriate line +in ``config/rte_config.h``. To make ip_reassembly print the statistics to the standard output, the user must send either an USR1, INT or TERM signal to the process. For all of these signals, the ip_reassembly process prints Fragment table statistics for each RX queue,
doc/guides/sample_app_ug/ipsec_secgw.rst +4 -10
@@ -116,12 +116,6 @@ To compile the sample application see :doc:`compiling`. The application is located in the ``ipsec-secgw`` sub-directory. -#. [Optional] Build the application for debugging: - This option adds some extra flags, disables compiler optimizations and - is verbose:: - - make DEBUG=1 - Running the Application -----------------------
@@ -129,7 +123,7 @@ Running the Application The application has a number of command line options:: - ./build/ipsec-secgw [EAL options] -- + ./<build_dir>/examples/dpdk-ipsec-secgw [EAL options] -- -p PORTMASK -P -u PORTMASK -j FRAMESIZE -l -w REPLAY_WINOW_SIZE -e -a -c SAD_CACHE_SIZE
@@ -245,7 +239,7 @@ The mapping of lcores to port/queues is similar to other l3fwd applications. For example, given the following command line to run application in poll mode:: - ./build/ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \ + ./<build_dir>/examples/dpdk-ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \ --vdev "crypto_null" -- -p 0xf -P -u 0x3 \ --config="(0,0,20),(1,0,20),(2,0,21),(3,0,21)" \ -f /path/to/config_file --transfer-mode poll \
@@ -297,7 +291,7 @@ where each option means: Similarly for example, given the following command line to run application in event app mode:: - ./build/ipsec-secgw -c 0x3 -- -P -p 0x3 -u 0x1 \ + ./<build_dir>/examples/dpdk-ipsec-secgw -c 0x3 -- -P -p 0x3 -u 0x1 \ -f /path/to/config_file --transfer-mode event \ --event-schedule-type parallel \
@@ -336,7 +330,7 @@ For example, something like the following command line: .. code-block:: console - ./build/ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \ + ./<build_dir>/examples/dpdk-ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \ -w 81:00.0 -w 81:00.1 -w 81:00.2 -w 81:00.3 \ --vdev "crypto_aesni_mb" --vdev "crypto_null" \ -- \
doc/guides/sample_app_ug/ipv4_multicast.rst +2 -2
@@ -50,7 +50,7 @@ The application has a number of command line options: .. code-block:: console - ./build/ipv4_multicast [EAL options] -- -p PORTMASK [-q NQ] + ./<build_dir>/examples/dpdk-ipv4_multicast [EAL options] -- -p PORTMASK [-q NQ] where,
@@ -67,7 +67,7 @@ Typically, to run the IPv4 Multicast sample application, issue the following com .. code-block:: console - ./build/ipv4_multicast -l 0-3 -n 3 -- -p 0x3 -q 1 + ./<build_dir>/examples/dpdk-ipv4_multicast -l 0-3 -n 3 -- -p 0x3 -q 1 In this command:
doc/guides/sample_app_ug/keep_alive.rst +2 -2
@@ -49,7 +49,7 @@ The application has a number of command line options: .. code-block:: console - ./build/l2fwd-keepalive [EAL options] \ + ./<build_dir>/examples/dpdk-l2fwd-keepalive [EAL options] \ -- -p PORTMASK [-q NQ] [-K PERIOD] [-T PERIOD] where,
@@ -68,7 +68,7 @@ To run the application in linux environment with 4 lcores, 16 ports .. code-block:: console - ./build/l2fwd-keepalive -l 0-3 -n 4 -- -q 8 -p ffff -K 10 + ./<build_dir>/examples/dpdk-l2fwd-keepalive -l 0-3 -n 4 -- -q 8 -p ffff -K 10 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL)
doc/guides/sample_app_ug/kernel_nic_interface.rst +7 -7
@@ -96,7 +96,7 @@ The ``kni`` example application requires a number of command line options: .. code-block:: console - kni [EAL options] -- -p PORTMASK --config="(port,lcore_rx,lcore_tx[,lcore_kthread,...])[,(port,lcore_rx,lcore_tx[,lcore_kthread,...])]" [-P] [-m] + dpdk-kni [EAL options] -- -p PORTMASK --config="(port,lcore_rx,lcore_tx[,lcore_kthread,...])[,(port,lcore_rx,lcore_tx[,lcore_kthread,...])]" [-P] [-m] Where:
@@ -168,8 +168,8 @@ interface ``vEth1_0`` with the kernel thread bound to lcore 9. .. code-block:: console # rmmod rte_kni - # insmod kmod/rte_kni.ko kthread_mode=multiple - # ./build/kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8),(1,5,7,9)" + # insmod <build_dir>/kernel/linux/kni/rte_kni.ko kthread_mode=multiple + # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8),(1,5,7,9)" The following example is identical, except an additional ``lcore_kthread`` core is specified per physical port. In this case, ``kni`` will create
@@ -186,8 +186,8 @@ The kernel thread for each interface will be bound as follows: .. code-block:: console # rmmod rte_kni - # insmod kmod/rte_kni.ko kthread_mode=multiple - # ./build/kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8,10),(1,5,7,9,11)" + # insmod <build_dir>/kernel/linux/kni/rte_kni.ko kthread_mode=multiple + # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8,10),(1,5,7,9,11)" The following example can be used to test the interface between the ``kni`` test application and the ``rte_kni`` kernel module. In this example,
@@ -206,8 +206,8 @@ disabled by **not** specifying the ``-m`` flag to ``kni``: .. code-block:: console # rmmod rte_kni - # insmod kmod/rte_kni.ko lo_mode=lo_mode_fifo carrier=on - # ./build/kni -l 4-7 -n 4 -- -P -p 0x3 --config="(0,4,6,8),(1,5,7,9)" + # insmod <build_dir>/kernel/linux/kni/rte_kni.ko lo_mode=lo_mode_fifo carrier=on + # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 --config="(0,4,6,8),(1,5,7,9)" KNI Operations --------------
doc/guides/sample_app_ug/l2_forward_cat.rst +2 -2
@@ -70,13 +70,13 @@ To run the example in a ``linux`` environment and enable CAT on cpus 0-2: .. code-block:: console - ./build/l2fwd-cat -l 1 -n 4 -- --l3ca="0x3@(0-2)" + ./<build_dir>/examples/dpdk-l2fwd-cat -l 1 -n 4 -- --l3ca="0x3@(0-2)" or to enable CAT and CDP on cpus 1,3: .. code-block:: console - ./build/l2fwd-cat -l 1 -n 4 -- --l3ca="(0x00C00,0x00300)@(1,3)" + ./<build_dir>/examples/dpdk-l2fwd-cat -l 1 -n 4 -- --l3ca="(0x00C00,0x00300)@(1,3)" If CDP is not supported it will fail with following error message:
doc/guides/sample_app_ug/l2_forward_crypto.rst +2 -2
@@ -39,7 +39,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/l2fwd-crypto [EAL options] -- [-p PORTMASK] [-q NQ] [-s] [-T PERIOD] / + ./<build_dir>/examples/dpdk-l2fwd-crypto [EAL options] -- [-p PORTMASK] [-q NQ] [-s] [-T PERIOD] / [--cdev_type HW/SW/ANY] [--chain HASH_CIPHER/CIPHER_HASH/CIPHER_ONLY/HASH_ONLY/AEAD] / [--cipher_algo ALGO] [--cipher_op ENCRYPT/DECRYPT] [--cipher_key KEY] / [--cipher_key_random_size SIZE] [--cipher_iv IV] [--cipher_iv_random_size SIZE] /
@@ -162,7 +162,7 @@ To run the application in linux environment with 2 lcores, 2 ports and 2 crypto .. code-block:: console - $ ./build/l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_aesni_mb0" \ + $ ./<build_dir>/examples/dpdk-l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_aesni_mb0" \ --vdev "crypto_aesni_mb1" -- -p 0x3 --chain CIPHER_HASH \ --cipher_op ENCRYPT --cipher_algo aes-cbc \ --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f \
doc/guides/sample_app_ug/l2_forward_event.rst +5 -5
@@ -52,7 +52,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/l2fwd-event [EAL options] -- -p PORTMASK [-q NQ] --[no-]mac-updating --mode=MODE --eventq-sched=SCHED_MODE + ./<build_dir>/examples/dpdk-l2fwd-event [EAL options] -- -p PORTMASK [-q NQ] --[no-]mac-updating --mode=MODE --eventq-sched=SCHED_MODE where,
@@ -75,20 +75,20 @@ issue the command: .. code-block:: console - ./build/l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=poll + ./<build_dir>/examples/dpdk-l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=poll Eventdev mode with 4 lcores, 16 ports , sched method ordered and MAC address updating enabled, issue the command: .. code-block:: console - ./build/l2fwd-event -l 0-3 -n 4 -- -p ffff --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l2fwd-event -l 0-3 -n 4 -- -p ffff --eventq-sched=ordered or .. code-block:: console - ./build/l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
@@ -105,7 +105,7 @@ scheduler. Following is the sample command: .. code-block:: console - ./build/l2fwd-event -l 0-7 -s 0-3 -n 4 --vdev event_sw0 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l2fwd-event -l 0-7 -s 0-3 -n 4 --vdev event_sw0 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered Explanation -----------
doc/guides/sample_app_ug/l2_forward_job_stats.rst +2 -2
@@ -81,7 +81,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/l2fwd-jobstats [EAL options] -- -p PORTMASK [-q NQ] [-l] + ./<build_dir>/examples/dpdk-l2fwd-jobstats [EAL options] -- -p PORTMASK [-q NQ] [-l] where,
@@ -96,7 +96,7 @@ thousands separator printing, issue the command: .. code-block:: console - $ ./build/l2fwd-jobstats -l 0-3 -n 4 -- -q 8 -p ffff -l + $ ./<build_dir>/examples/dpdk-l2fwd-jobstats -l 0-3 -n 4 -- -q 8 -p ffff -l Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/l2_forward_real_virtual.rst +3 -3
@@ -91,7 +91,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/l2fwd [EAL options] -- -p PORTMASK + ./<build_dir>/examples/dpdk-l2fwd [EAL options] -- -p PORTMASK [-q NQ] --[no-]mac-updating [--portmap="(port, port)[,(port, port)]"]
@@ -111,7 +111,7 @@ updating enabled, issue the command: .. code-block:: console - $ ./build/l2fwd -l 0-3 -n 4 -- -q 8 -p ffff + $ ./<build_dir>/examples/dpdk-l2fwd -l 0-3 -n 4 -- -q 8 -p ffff To run the application in linux environment with 4 lcores, 4 ports, 8 RX queues per lcore, to forward RX traffic of ports 0 & 1 on ports 2 & 3 respectively and
@@ -119,7 +119,7 @@ vice versa, issue the command: .. code-block:: console - $ ./build/l2fwd -l 0-3 -n 4 -- -q 8 -p f --portmap="(0,2)(1,3)" + $ ./<build_dir>/examples/dpdk-l2fwd -l 0-3 -n 4 -- -q 8 -p f --portmap="(0,2)(1,3)" Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/l3_forward.rst +5 -5
@@ -51,7 +51,7 @@ Running the Application The application has a number of command line options:: - ./l3fwd [EAL options] -- -p PORTMASK + ./dpdk-l3fwd [EAL options] -- -p PORTMASK [-P] [-E] [-L]
@@ -111,7 +111,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s .. code-block:: console - ./build/l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" + ./<build_dir>/examples/dpdk-l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" In this command:
@@ -138,13 +138,13 @@ Following is the sample command: .. code-block:: console - ./build/l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x3 --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x3 --eventq-sched=ordered or .. code-block:: console - ./build/l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x03 --mode=eventdev --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x03 --mode=eventdev --eventq-sched=ordered In this command:
@@ -166,7 +166,7 @@ scheduler. Following is the sample command: .. code-block:: console - ./build/l3fwd -l 0-7 -s 0xf0000 -n 4 --vdev event_sw0 -- -p 0x3 --mode=eventdev --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l3fwd -l 0-7 -s 0xf0000 -n 4 --vdev event_sw0 -- -p 0x3 --mode=eventdev --eventq-sched=ordered In case of eventdev mode, *--config* option is not used for ethernet port configuration. Instead each ethernet port will be configured with mentioned
doc/guides/sample_app_ug/l3_forward_access_ctrl.rst +3 -3
@@ -184,7 +184,7 @@ Packet 2 matches Rule 2 and is forwarded to port 1. Packet 3 matches Rule 3 and is forwarded to port 0. For more details on the rule file format, -please refer to rule_ipv4.db and rule_ipv6.db files (inside <RTE_SDK>/examples/l3fwd-acl/). +please refer to rule_ipv4.db and rule_ipv6.db files (inside dpdk/examples/l3fwd-acl/). Application Phases ~~~~~~~~~~~~~~~~~~
@@ -236,7 +236,7 @@ The application has a number of command line options: .. code-block:: console - ./build/l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] + ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] where,
@@ -268,7 +268,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s .. code-block:: console - ./build/l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --scalar + ./<build_dir>/examples/dpdk-l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --scalar In this command:
doc/guides/sample_app_ug/l3_forward_graph.rst +2 -2
@@ -44,7 +44,7 @@ Running the Application The application has a number of command line options similar to l3fwd:: - ./l3fwd-graph [EAL options] -- -p PORTMASK + ./dpdk-l3fwd-graph [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
@@ -79,7 +79,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s .. code-block:: console - ./build/l3fwd-graph -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" + ./<build_dir>/examples/dpdk-l3fwd-graph -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" In this command:
doc/guides/sample_app_ug/l3_forward_power_man.rst +5 -9
@@ -88,7 +88,7 @@ The application has a number of command line options: .. code-block:: console - ./build/l3fwd_power [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] + ./<build_dir>/examples/dpdk-l3fwd_power [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] where,
@@ -378,7 +378,7 @@ See :doc:`Power Management<../prog_guide/power_man>` chapter in the DPDK Program .. code-block:: console - ./l3fwd-power -l xxx -n 4 -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3 -P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1 + ./<build_dir>/examples/dpdk-l3fwd-power -l xxx -n 4 -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3 -P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1 Where,
@@ -407,7 +407,7 @@ app with the training flag set to “1”, and the other parameters set to .. code-block:: console - ./examples/l3fwd-power/build/l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "1,0,0" –P + ./<build_dir>/examples/dpdk-l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "1,0,0" –P This will run the training algorithm for x seconds on each core (cores 2 and 3), and then print out the recommended threshold values for those
@@ -432,7 +432,7 @@ then be started without the training mode so traffic can start immediately. .. code-block:: console - ./examples/l3fwd-power/build/l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "0,340000,540000" –P + ./<build_dir>/examples/dpdk-l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "0,340000,540000" –P Telemetry Mode --------------
@@ -449,13 +449,9 @@ cycles it took is measured and compared with minimum and maximum reference cycles and accordingly busy rate is set to either 0% or 50% or 100%. - .. Note:: - - * The CONFIG_RTE_LIBRTE_TELEMETRY should be set in order to get the stats in DPDK telemetry. - .. code-block:: console - ./examples/l3fwd-power/build/l3fwd-power --telemetry -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --telemetry + ./<build_dir>/examples/dpdk-l3fwd-power --telemetry -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --telemetry The new stats ``empty_poll`` , ``full_poll`` and ``busy_percent`` can be viewed by running the script ``/usertools/dpdk-telemetry-client.py`` and selecting the menu option ``Send for global Metrics``.
doc/guides/sample_app_ug/link_status_intr.rst +2 -2
@@ -39,7 +39,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/link_status_interrupt [EAL options] -- -p PORTMASK [-q NQ][-T PERIOD] + ./<build_dir>/examples/dpdk-link_status_interrupt [EAL options] -- -p PORTMASK [-q NQ][-T PERIOD] where,
@@ -54,7 +54,7 @@ issue the command: .. code-block:: console - $ ./build/link_status_interrupt -l 0-3 -n 4-- -q 8 -p ffff + $ ./<build_dir>/examples/dpdk-link_status_interrupt -l 0-3 -n 4-- -q 8 -p ffff Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/multi_process.rst +10 -10
@@ -41,7 +41,7 @@ passing at least two cores in the coremask/corelist, as follows: .. code-block:: console - ./build/simple_mp -l 0-1 -n 4 --proc-type=primary + ./<build_dir>/examples/dpdk-simple_mp -l 0-1 -n 4 --proc-type=primary For the first DPDK process run, the proc-type flag can be omitted or set to auto, since all DPDK processes will default to being a primary instance,
@@ -50,7 +50,7 @@ The process should start successfully and display a command prompt as follows: .. code-block:: console - $ ./build/simple_mp -l 0-1 -n 4 --proc-type=primary + $ ./<build_dir>/examples/dpdk-simple_mp -l 0-1 -n 4 --proc-type=primary EAL: coremask set to 3 EAL: Detected lcore 0 on socket 0 EAL: Detected lcore 1 on socket 0
@@ -78,7 +78,7 @@ again run the same binary setting at least two cores in the coremask/corelist: .. code-block:: console - ./build/simple_mp -l 2-3 -n 4 --proc-type=secondary + ./<build_dir>/examples/dpdk-simple_mp -l 2-3 -n 4 --proc-type=secondary When running a secondary process such as that shown above, the proc-type parameter can again be specified as auto. However, omitting the parameter altogether will cause the process to try and start as a primary rather than secondary process.
@@ -184,10 +184,10 @@ the following commands can be used (assuming run as root): .. code-block:: console - # ./build/symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0 - # ./build/symmetric_mp -l 2 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1 - # ./build/symmetric_mp -l 3 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2 - # ./build/symmetric_mp -l 4 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3 + # ./<build_dir>/examples/dpdk-symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0 + # ./<build_dir>/examples/dpdk-symmetric_mp -l 2 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1 + # ./<build_dir>/examples/dpdk-symmetric_mp -l 3 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2 + # ./<build_dir>/examples/dpdk-symmetric_mp -l 4 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3 .. note::
@@ -284,9 +284,9 @@ the following commands could be used: .. code-block:: console - # ./mp_server/build/mp_server -l 1-2 -n 4 -- -p 3 -n 2 - # ./mp_client/build/mp_client -l 3 -n 4 --proc-type=auto -- -n 0 - # ./mp_client/build/mp_client -l 4 -n 4 --proc-type=auto -- -n 1 + # ./<build_dir>/examples/dpdk-mp_server -l 1-2 -n 4 -- -p 3 -n 2 + # ./<build_dir>/examples/dpdk-mp_client -l 3 -n 4 --proc-type=auto -- -n 0 + # ./<build_dir>/examples/dpdk-mp_client -l 4 -n 4 --proc-type=auto -- -n 1 .. note::
doc/guides/sample_app_ug/ntb.rst +1 -1
@@ -32,7 +32,7 @@ The only available options are the standard ones for the EAL: .. code-block:: console - ./build/ntb_fwd -c 0xf -n 6 -- -i + ./<build_dir>/examples/dpdk-ntb -c 0xf -n 6 -- -i Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL)
doc/guides/sample_app_ug/packet_ordering.rst +2 -1
@@ -43,7 +43,8 @@ The application execution command line is: .. code-block:: console - ./packet_ordering [EAL options] -- -p PORTMASK [--disable-reorder] [--insight-worker] + ./<build_dir>/examples/dpdk-packet_ordering [EAL options] -- -p PORTMASK / + [--disable-reorder] [--insight-worker] The -c EAL CPU_COREMASK option has to contain at least 3 CPU cores. The first CPU core in the core mask is the master core and would be assigned to
doc/guides/sample_app_ug/performance_thread.rst +13 -31
121 lines not on this page · raw message
doc/guides/sample_app_ug/ptpclient.rst +1 -8
@@ -57,13 +57,6 @@ To compile the sample application see :doc:`compiling`. The application is located in the ``ptpclient`` sub-directory. -.. note:: - To compile the application edit the ``config/common_linux`` configuration file to enable IEEE1588 - and then recompile DPDK: - - .. code-block:: console - - CONFIG_RTE_LIBRTE_IEEE1588=y Running the Application -----------------------
@@ -72,7 +65,7 @@ To run the example in a ``linux`` environment: .. code-block:: console - ./build/ptpclient -l 1 -n 4 -- -p 0x1 -T 0 + ./<build_dir>/examples/dpdk-ptpclient -l 1 -n 4 -- -p 0x1 -T 0 Refer to *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/qos_metering.rst +1 -1
@@ -48,7 +48,7 @@ The application execution command line is as below: .. code-block:: console - ./qos_meter [EAL options] -- -p PORTMASK + ./dpdk-qos_meter [EAL options] -- -p PORTMASK The application is constrained to use a single core in the EAL core mask and 2 ports only in the application port mask (first port from the port mask is used for RX and the other port in the core mask is used for TX).
doc/guides/sample_app_ug/qos_scheduler.rst +5 -5
@@ -42,8 +42,8 @@ The application is located in the ``qos_sched`` sub-directory. .. note:: To get statistics on the sample app using the command line interface as described in the next section, - DPDK must be compiled defining *CONFIG_RTE_SCHED_COLLECT_STATS*, - which can be done by changing the configuration file for the specific target to be compiled. + DPDK must be compiled defining *RTE_SCHED_COLLECT_STATS*, which can be done by changing the relevant + entry in the ``config/rte_config.h`` file. Running the Application -----------------------
@@ -57,7 +57,7 @@ The application has a number of command line options: .. code-block:: console - ./qos_sched [EAL options] -- <APP PARAMS> + ./<build_dir>/examples/dpdk-qos_sched [EAL options] -- <APP PARAMS> Mandatory application parameters include:
@@ -315,7 +315,7 @@ The following is an example command with a single packet flow configuration: .. code-block:: console - ./qos_sched -l 1,5,7 -n 4 -- --pfc "3,2,5,7" --cfg ./profile.cfg + ./<build_dir>/examples/dpdk-qos_sched -l 1,5,7 -n 4 -- --pfc "3,2,5,7" --cfg ./profile.cfg This example uses a single packet flow configuration which creates one RX thread on lcore 5 reading from port 3 and a worker thread on lcore 7 writing to port 2.
@@ -324,7 +324,7 @@ Another example with 2 packet flow configurations using different ports but shar .. code-block:: console - ./qos_sched -l 1,2,6,7 -n 4 -- --pfc "3,2,2,6,7" --pfc "1,0,2,6,7" --cfg ./profile.cfg + ./<build_dir>/examples/dpdk-qos_sched -l 1,2,6,7 -n 4 -- --pfc "3,2,2,6,7" --pfc "1,0,2,6,7" --cfg ./profile.cfg Note that independent cores for the packet flow configurations for each of the RX, WT and TX thread are also supported, providing flexibility to balance the work.
doc/guides/sample_app_ug/rxtx_callbacks.rst +1 -8
@@ -25,13 +25,6 @@ To compile the sample application see :doc:`compiling`. The application is located in the ``rxtx_callbacks`` sub-directory. -The callbacks feature requires that the ``CONFIG_RTE_ETHDEV_RXTX_CALLBACKS`` -setting is on in the ``config/common_`` config file that applies to the -target. This is generally on by default: - -.. code-block:: console - - CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y Running the Application -----------------------
@@ -40,7 +33,7 @@ To run the example in a ``linux`` environment: .. code-block:: console - ./build/rxtx_callbacks -l 1 -n 4 -- [-t] + ./<build_dir>/examples/dpdk-rxtx_callbacks -l 1 -n 4 -- [-t] Use -t to enable hardware timestamping. If not supported by the NIC, an error will be displayed.
doc/guides/sample_app_ug/server_node_efd.rst +1 -1
@@ -93,7 +93,7 @@ and the back-end node. The frontend server (server) has the following command line options:: - ./server [EAL options] -- -p PORTMASK -n NUM_NODES -f NUM_FLOWS + ./<build_dir>/examples/dpdk-server [EAL options] -- -p PORTMASK -n NUM_NODES -f NUM_FLOWS Where,
doc/guides/sample_app_ug/service_cores.rst +3 -20
@@ -20,26 +20,9 @@ is application specific, and not a part of the service cores API. Compiling the Application ------------------------- -#. Go to the example directory: +To compile the sample application see :doc:`compiling`. - .. code-block:: console - - export RTE_SDK=/path/to/rte_sdk - cd ${RTE_SDK}/examples/service_cores - -#. Set the target (a default target is used if not specified). For example: - - .. code-block:: console - - export RTE_TARGET=x86_64-native-linux-gcc - - See the *DPDK Getting Started* Guide for possible RTE_TARGET values. - -#. Build the application: - - .. code-block:: console - - make +The application is located in the ``service_cores`` sub-directory. Running the Application -----------------------
@@ -50,7 +33,7 @@ pass a service core-mask as an EAL argument at startup time. .. code-block:: console - $ ./build/service_cores + $ ./<build_dir>/examples/dpdk-service_cores Explanation
doc/guides/sample_app_ug/skeleton.rst +1 -1
@@ -25,7 +25,7 @@ To run the example in a ``linux`` environment: .. code-block:: console - ./build/basicfwd -l 1 -n 4 + ./<build_dir>/examples/dpdk-skeleton -l 1 -n 4 Refer to *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/tep_termination.rst +12 -31
97 lines not on this page · raw message
doc/guides/sample_app_ug/test_pipeline.rst +2 -2
@@ -32,7 +32,7 @@ Compiling the Application ------------------------- To compile the sample application see :doc:`compiling` -The application is located in the ``$RTE_SDK/app/test-pipeline`` directory. +The application is located in the ``dpdk/<build_dir>/app`` directory. Running the Application
@@ -45,7 +45,7 @@ The application execution command line is: .. code-block:: console - ./test-pipeline [EAL options] -- -p PORTMASK --TABLE_TYPE + ./dpdk-test-pipeline [EAL options] -- -p PORTMASK --TABLE_TYPE The -c or -l EAL CPU coremask/corelist option has to contain exactly 3 CPU cores. The first CPU core in the core mask is assigned for core A, the second for core B and the third for core C.
doc/guides/sample_app_ug/timer.rst +1 -1
@@ -21,7 +21,7 @@ To run the example in linux environment: .. code-block:: console - $ ./build/timer -l 0-3 -n 4 + $ ./<build_dir>/examples/dpdk-timer -l 0-3 -n 4 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/vdpa.rst +2 -2
@@ -29,7 +29,7 @@ Start the vdpa example .. code-block:: console - ./vdpa [EAL options] -- [--client] [--interactive|-i] or [--iface SOCKET_PATH] + ./dpdk-vdpa [EAL options] -- [--client] [--interactive|-i] or [--iface SOCKET_PATH] where
@@ -51,7 +51,7 @@ Take IFCVF driver for example: .. code-block:: console - ./vdpa -c 0x2 -n 4 --socket-mem 1024,1024 \ + ./dpdk-vdpa -c 0x2 -n 4 --socket-mem 1024,1024 \ -w 0000:06:00.3,vdpa=1 -w 0000:06:00.4,vdpa=1 \ -- --interactive
doc/guides/sample_app_ug/vhost.rst +3 -8
@@ -38,7 +38,7 @@ Start the vswitch example .. code-block:: console - ./vhost-switch -l 0-3 -n 4 --socket-mem 1024 \ + ./dpdk-vhost-switch -l 0-3 -n 4 --socket-mem 1024 \ -- --socket-file /tmp/sock0 --client \ ...
@@ -78,13 +78,13 @@ could be done by: .. code-block:: console modprobe uio_pci_generic - $RTE_SDK/usertools/dpdk-devbind.py -b uio_pci_generic 0000:00:04.0 + dpdk/usertools/dpdk-devbind.py -b uio_pci_generic 0000:00:04.0 Then start testpmd for packet forwarding testing. .. code-block:: console - ./x86_64-native-gcc/app/testpmd -l 0-1 -- -i + ./<build_dir>/app/dpdk-testpmd -l 0-1 -- -i > start tx_first Inject packets
@@ -192,11 +192,6 @@ Common Issues max queue number is larger than 128, device start will fail due to insufficient mbuf. - Change the default number to make it work as below, just set the number - according to the NIC's property. :: - - make EXTRA_CFLAGS="-DMAX_QUEUES=320" - * Option "builtin-net-driver" is incompatible with QEMU QEMU vhost net device start will fail if protocol feature is not negotiated.
doc/guides/sample_app_ug/vhost_blk.rst +1 -1
@@ -36,7 +36,7 @@ Start the vhost_blk example .. code-block:: console - ./vhost_blk -m 1024 + ./dpdk-vhost_blk -m 1024 .. _vhost_blk_app_run_vm:
doc/guides/sample_app_ug/vhost_crypto.rst +1 -1
@@ -28,7 +28,7 @@ Start the vhost_crypto example .. code-block:: console - ./vhost_crypto [EAL options] -- + ./dpdk-vhost_crypto [EAL options] -- --config (lcore,cdev-id,queue-id)[,(lcore,cdev-id,queue-id)] --socket-file lcore,PATH [--zero-copy]
doc/guides/sample_app_ug/vm_power_management.rst +14 -20
@@ -245,26 +245,23 @@ To build just the ``vm_power_manager`` application using ``make``: .. code-block:: console - export RTE_SDK=/path/to/rte_sdk - export RTE_TARGET=build - cd ${RTE_SDK}/examples/vm_power_manager/ + cd dpdk/examples/vm_power_manager/ make -The resulting binary is ``${RTE_SDK}/build/examples/vm_power_manager``. +The resulting binary is ``dpdk/build/examples/vm_power_manager``. To build just the ``vm_power_manager`` application using ``meson``/``ninja``: .. code-block:: console - export RTE_SDK=/path/to/rte_sdk - cd ${RTE_SDK} + cd dpdk meson build cd build ninja meson configure -Dexamples=vm_power_manager ninja -The resulting binary is ``${RTE_SDK}/build/examples/dpdk-vm_power_manager``. +The resulting binary is ``dpdk/build/examples/dpdk-vm_power_manager``. Running the Host Application ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -274,7 +271,7 @@ than the EAL options: .. code-block:: console - ./build/vm_power_mgr [EAL options] + ./<build_dir>/examples/dpdk-vm_power_mgr [EAL options] The application requires exactly two cores to run. One core for the CLI and the other for the channel endpoint monitor. For example, to run on
@@ -282,7 +279,7 @@ cores 0 and 1 on a system with four memory channels, issue the command: .. code-block:: console - ./build/vm_power_mgr -l 0-1 -n 4 + ./<build_dir>/examples/dpdk-vm_power_mgr -l 0-1 -n 4 After successful initialization, the VM Power Manager CLI prompt appears:
@@ -462,12 +459,10 @@ the following commands: .. code-block:: console - export RTE_SDK=/path/to/rte_sdk - export RTE_TARGET=build - cd ${RTE_SDK}/examples/vm_power_manager/guest_cli/ + cd dpdk/examples/vm_power_manager/guest_cli/ make -The resulting binary is ``${RTE_SDK}/build/examples/guest_cli``. +The resulting binary is ``dpdk/build/examples/guest_cli``. **Note**: This sample application conditionally links in the Jansson JSON library. Consequently, if you are using a multilib or cross-compile
@@ -498,15 +493,14 @@ To build just the ``vm_power_manager`` application using ``meson``/``ninja``: .. code-block:: console - export RTE_SDK=/path/to/rte_sdk - cd ${RTE_SDK} + cd dpdk meson build cd build ninja meson configure -Dexamples=vm_power_manager/guest_cli ninja -The resulting binary is ``${RTE_SDK}/build/examples/guest_cli``. +The resulting binary is ``dpdk/build/examples/guest_cli``. Running the Guest Application ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -515,14 +509,14 @@ The standard EAL command line parameters are necessary: .. code-block:: console - ./build/vm_power_mgr [EAL options] -- [guest options] + ./<build_dir>/examples/dpdk-vm_power_mgr [EAL options] -- [guest options] The guest example uses a channel for each lcore enabled. For example, to run on cores 0, 1, 2 and 3: .. code-block:: console - ./build/guest_vm_power_mgr -l 0-3 + ./<build_dir>/examples/dpdk-guest_vm_power_mgr -l 0-3 .. _sending_policy:
@@ -593,7 +587,7 @@ host, use a command like the following: .. code-block:: console - ./build/guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4 + ./<build_dir>/examples/dpdk-guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4 Once the VM Power Manager Guest CLI appears, issuing the 'send_policy now' command will send the policy to the host:
@@ -707,7 +701,7 @@ To start the application and configure the power policy, and send it to the host .. code-block:: console - ./build/guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4 + ./<build_dir>/examples/dpdk-guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4 Once the VM Power Manager Guest CLI appears, issuing the 'send_policy now' command will send the policy to the host:
doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst +4 -4
@@ -26,13 +26,13 @@ multiple queues. When run with 8 threads, that is, with the -c FF option, each t As supplied, the sample application configures the VMDQ feature to have 32 pools with 4 queues each as indicated in :numref:`figure_vmdq_dcb_example`. The Intel® 82599 10 Gigabit Ethernet Controller NIC also supports the splitting of traffic into 16 pools of 8 queues. While the Intel® X710 or XL710 Ethernet Controller NICs support many configurations of VMDQ pools of 4 or 8 queues each. For simplicity, only 16 -or 32 pools is supported in this sample. And queues numbers for each VMDQ pool can be changed by setting CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM -in config/common_* file. +or 32 pools is supported in this sample. And queues numbers for each VMDQ pool can be changed by setting RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM +in config/rte_config.h file. The nb-pools, nb-tcs and enable-rss parameters can be passed on the command line, after the EAL parameters: .. code-block:: console - ./build/vmdq_dcb [EAL options] -- -p PORTMASK --nb-pools NP --nb-tcs TC --enable-rss + ./<build_dir>/examples/dpdk-vmdq_dcb [EAL options] -- -p PORTMASK --nb-pools NP --nb-tcs TC --enable-rss where, NP can be 16 or 32, TC can be 4 or 8, rss is disabled by default.
@@ -72,7 +72,7 @@ To run the example in a linux environment: .. code-block:: console - user@target:~$ ./build/vmdq_dcb -l 0-3 -n 4 -- -p 0x3 --nb-pools 32 --nb-tcs 4 + user@target:~$ ./<build_dir>/examples/dpdk-vmdq_dcb -l 0-3 -n 4 -- -p 0x3 --nb-pools 32 --nb-tcs 4 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/vmdq_forwarding.rst +4 -4
@@ -24,13 +24,13 @@ multiple queues. When run with 8 threads, that is, with the -c FF option, each t As supplied, the sample application configures the VMDq feature to have 32 pools with 4 queues each. The Intel® 82599 10 Gigabit Ethernet Controller NIC also supports the splitting of traffic into 16 pools of 2 queues. While the Intel® X710 or XL710 Ethernet Controller NICs support many configurations of VMDq pools of 4 or 8 queues each. -And queues numbers for each VMDq pool can be changed by setting CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM -in config/common_* file. +And queues numbers for each VMDq pool can be changed by setting RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM +in config/rte_config.h file. The nb-pools and enable-rss parameters can be passed on the command line, after the EAL parameters: .. code-block:: console - ./build/vmdq_app [EAL options] -- -p PORTMASK --nb-pools NP --enable-rss + ./<build_dir>/examples/dpdk-vmdq [EAL options] -- -p PORTMASK --nb-pools NP --enable-rss where, NP can be 8, 16 or 32, rss is disabled by default.
@@ -56,7 +56,7 @@ To run the example in a Linux environment: .. code-block:: console - user@target:~$ ./build/vmdq_app -l 0-3 -n 4 -- -p 0x3 --nb-pools 16 + user@target:~$ ./<build_dir>/examples/dpdk-vmdq -l 0-3 -n 4 -- -p 0x3 --nb-pools 16 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/testpmd_app_ug/run_app.rst +3 -3
@@ -20,7 +20,7 @@ They must be separated from the EAL options, shown in the previous section, with .. code-block:: console - sudo ./testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=2 + sudo ./dpdk-testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=2 The command line options are:
@@ -59,13 +59,13 @@ The command line options are: * ``--nb-cores=N`` Set the number of forwarding cores, - where 1 <= N <= "number of cores" or ``CONFIG_RTE_MAX_LCORE`` from the configuration file. + where 1 <= N <= "number of cores" or ``RTE_MAX_LCORE`` from the configuration file. The default value is 1. * ``--nb-ports=N`` Set the number of forwarding ports, - where 1 <= N <= "number of ports" on the board or ``CONFIG_RTE_MAX_ETHPORTS`` from the configuration file. + where 1 <= N <= "number of ports" on the board or ``RTE_MAX_ETHPORTS`` from the configuration file. The default value is the number of ports on the board. * ``--coremask=0xXX``
doc/guides/testpmd_app_ug/testpmd_funcs.rst +2 -7
@@ -71,7 +71,7 @@ practical or possible testpmd supports alternative methods for executing command .. code-block:: console - ./testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt + ./dpdk-testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt Interactive-mode selected CLI commands to be read from /home/ubuntu/flow-create-commands.txt Configuring Port 0 (socket 0)
@@ -329,7 +329,7 @@ The available information categories are: * ``icmpecho``: Receives a burst of packets, lookup for ICMP echo requests and, if any, send back ICMP echo replies. -* ``ieee1588``: Demonstrate L2 IEEE1588 V2 PTP timestamping for RX and TX. Requires ``CONFIG_RTE_LIBRTE_IEEE1588=y``. +* ``ieee1588``: Demonstrate L2 IEEE1588 V2 PTP timestamping for RX and TX. * ``noisy``: Noisy neighbor simulation. Simulate more realistic behavior of a guest machine engaged in receiving
@@ -379,11 +379,6 @@ Example for the io forwarding engine, with some packet drops on the tx side:: TX-packets: 548595568 TX-dropped: 128 TX-total: 548595696 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -.. note:: - - Enabling CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES appends "CPU cycles/packet" stats, like: - - CPU cycles/packet=xx.dd (total cycles=xxxx / total RX packets=xxxx) at xxx MHz clock clear fwd ~~~~~~~~~
Signature · 1 line
2.17.1
Re: [dpdk-dev] [PATCH v5 16/20] doc: remove references to make from app guides
Hi Ciara,
Quoted 6 lines · Ciara Power
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
Signed-off-by Ciara Power <[email protected]>Acked-by Nicolas Chautru <[email protected]>---
--snip--
When checking the vm_power_manager portion of this guide, I came across a dependency on a patch set that Bruce submitted, which makes some power management library headers public. This patch set needs to be applied so vm_power_mgr and guest_cli can be build with these instruction.
http://patches.dpdk.org/project/dpdk/list/?series=11745
Once that patch set is applied, new guide instructions works well.
Also, one small nit, if you're pusing another version of the patch set (don't worry about it of you're not), maybe something to consider for the patch description: While make has been deprecated for DPDK, it's still applicable for some example apps, this patch set adjusts the guides to take that into consideration.
Thanks,
Dave.
PATCH v5 17/20 doc: remove reference to make from tools guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
---
v5:
- Reworded sentence in pdump doc.
- Replaced references to testbbdev binary with dpdk-test-bbdev.
- Fixed links to linux_gsg doc.
--- doc/guides/tools/comp_perf.rst | 10 ++------ doc/guides/tools/cryptoperf.rst | 20 +++------------- doc/guides/tools/pdump.rst | 15 +++++------- doc/guides/tools/proc_info.rst | 2 +- doc/guides/tools/testbbdev.rst | 38 +++++++++---------------------- doc/guides/tools/testeventdev.rst | 21 ++++++++--------- 6 files changed, 32 insertions(+), 74 deletions(-)
doc/guides/tools/comp_perf.rst +2 -8
@@ -100,13 +100,7 @@ Application Options Compiling the Tool ------------------ -**Step 1: PMD setting** - -The ``dpdk-test-compress-perf`` tool depends on compression device drivers PMD which -can be disabled by default in the build configuration file ``common_base``. -The compression device drivers PMD which should be tested can be enabled by setting e.g.:: - - CONFIG_RTE_LIBRTE_PMD_ISAL=y +See :doc:`../linux_gsg/build_dpdk` for compilation steps. Running the Tool
@@ -116,5 +110,5 @@ The tool has a number of command line options. Here is the sample command line: .. code-block:: console - ./build/app/dpdk-test-compress-perf -l 4 -- --driver-name compress_qat --input-file test.txt --seg-sz 8192 + ./<build_dir>/app/dpdk-test-compress-perf -l 4 -- --driver-name compress_qat --input-file test.txt --seg-sz 8192 --compress-level 1:1:9 --num-iter 10 --extended-input-sz 1048576 --max-num-sgl-segs 16 --huffman-enc fixed
doc/guides/tools/cryptoperf.rst +3 -17
@@ -33,19 +33,8 @@ the hardware accelerator fully loaded and so measure maximum throughput. Compiling the Application ------------------------- -**Step 1: PMD setting** -The ``dpdk-test-crypto-perf`` tool depends on crypto device drivers PMD which -are disabled by default in the build configuration file ``common_base``. -The crypto device drivers PMD which should be tested can be enabled by setting:: - - CONFIG_RTE_LIBRTE_PMD_<name>=y - -Setting example for open ssl PMD:: - - CONFIG_RTE_LIBRTE_PMD_OPENSSL=y - -**Step 2: Linearization setting** +**Step 1: Linearization setting** It is possible linearized input segmented packets just before crypto operation for devices which doesn't support scatter-gather, and allows to measure
@@ -56,13 +45,10 @@ To set on the linearization options add below definition to the #define CPERF_LINEARIZATION_ENABLE -**Step 3: Build the application** +**Step 2: Build the application** -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-crypto-perf`` application. +See :doc:`../linux_gsg/build_dpdk` for compilation steps. -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
doc/guides/tools/pdump.rst +6 -9
@@ -19,12 +19,9 @@ a DPDK secondary process and is capable of enabling packet capture on dpdk ports framework initialization code. Refer ``app/test-pmd/testpmd.c`` code to see how this is done. - * The ``dpdk-pdump`` tool depends on libpcap based PMD which is disabled - by default in the build configuration files, - owing to an external dependency on the libpcap development files - which must be installed on the board. - Once the libpcap development files are installed, the libpcap based PMD - can be enabled by setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK. + * The ``dpdk-pdump`` tool depends on DPDK pcap PMD, so the system should + have libpcap development files installed and the pcap PMD not disabled + in the build. * The ``dpdk-pdump`` tool runs as a DPDK secondary process. It exits when the primary application exits.
@@ -37,7 +34,7 @@ The tool has a number of command line options: .. code-block:: console - ./build/app/dpdk-pdump -- + ./<build_dir>/app/dpdk-pdump -- [--multi] --pdump '(port=<port id> | device_id=<pci id or vdev name>), (queue=<queue_id>),
@@ -120,5 +117,5 @@ Example .. code-block:: console - $ sudo ./build/app/dpdk-pdump -l 3 -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap' - $ sudo ./build/app/dpdk-pdump -l 3,4,5 -- --multi --pdump 'port=0,queue=*,rx-dev=/tmp/rx-1.pcap' --pdump 'port=1,queue=*,rx-dev=/tmp/rx-2.pcap' + $ sudo ./<build_dir>/app/dpdk-pdump -l 3 -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap' + $ sudo ./<build_dir>/app/dpdk-pdump -l 3,4,5 -- --multi --pdump 'port=0,queue=*,rx-dev=/tmp/rx-1.pcap' --pdump 'port=1,queue=*,rx-dev=/tmp/rx-2.pcap'
doc/guides/tools/proc_info.rst +1 -1
@@ -17,7 +17,7 @@ The application has a number of command line options: .. code-block:: console - ./$(RTE_TARGET)/app/dpdk-procinfo -- -m | [-p PORTMASK] [--stats | --xstats | + ./<build_dir>/app/dpdk-procinfo -- -m | [-p PORTMASK] [--stats | --xstats | --stats-reset | --xstats-reset] [ --show-port | --show-tm | --show-crypto | --show-ring[=name] | --show-mempool[=name] | --iter-mempool=name ]
doc/guides/tools/testbbdev.rst +11 -27
@@ -13,25 +13,10 @@ parameters passed to a python running script. Compiling the Application ------------------------- -**Step 1: PMD setting** +**Build the application** -The ``dpdk-test-bbdev`` tool depends on crypto device drivers PMD which -are disabled by default in the build configuration file ``common_base``. -The bbdevice drivers PMD which should be tested can be enabled by setting +See :doc:`../linux_gsg/build_dpdk` for compilation steps. - ``CONFIG_RTE_LIBRTE_PMD_<name>=y`` - -Setting example for (*baseband_turbo_sw*) PMD - - ``CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y`` - -**Step 2: Build the application** - -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-bbdev`` application. - -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
@@ -60,7 +45,7 @@ The following are the command-line options: ``-p TESTAPP_PATH, --testapp_path TESTAPP_PATH`` Indicates the path to the bbdev test app. If not specified path is set based - on *$RTE_SDK* environment variable concatenated with "*/build/app/testbbdev*". + on "../.." concatenated with "*/build/app/dpdk-test-bbdev*". ``-e EAL_PARAMS, --eal_params EAL_PARAMS`` Specifies EAL arguments which are passed to the test app. For more details,
@@ -82,9 +67,8 @@ The following are the command-line options: ``-v TEST_VECTOR [TEST_VECTOR ...], --test_vector TEST_VECTOR [TEST_VECTOR ...]`` Specifies paths to the test vector files. If not specified path is set based - on *$RTE_SDK* environment variable concatenated with - "*/app/test-bbdev/test_vectors/bbdev_null.data*" and indicates default - data file. + on "../.." concatenated with "*/app/test-bbdev/test_vectors/bbdev_null.data*" +and indicates default data file. **Example usage:**
@@ -259,8 +243,8 @@ They are chosen to have a good coverage across sizes and processing parameters while still keeping their number limited as part of sanity regression. -Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled for -x86_64-native-linux-icc target: +Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled and output +to the build directory: ::
@@ -268,16 +252,16 @@ x86_64-native-linux-icc target: |-- test-bbdev |-- test_vectors - |-- x86_64-native-linux-icc + |-- build |-- app - |-- testbbdev + |-- dpdk-test-bbdev All bbdev devices ~~~~~~~~~~~~~~~~~ .. code-block:: console - ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev + ./test-bbdev.py -p ../../build/app/dpdk-test-bbdev -v turbo_dec_default.data It runs all available tests using the test vector filled based on
@@ -291,7 +275,7 @@ baseband turbo_sw device .. code-block:: console - ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev + ./test-bbdev.py -p ../../build/app/dpdk-test-bbdev -e="--vdev=baseband_turbo_sw" -t 120 -c validation -v ./test_vectors/* -n 64 -b 8 32
doc/guides/tools/testeventdev.rst +9 -12
@@ -15,11 +15,8 @@ Compiling the Application **Build the application** -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-eventdev`` application. +See :doc:`../linux_gsg/build_dpdk` for compilation steps. -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
@@ -251,7 +248,7 @@ Example command to run order queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev=event_sw0 -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_sw0 -- \ --test=order_queue --plcores 1 --wlcores 2,3
@@ -314,7 +311,7 @@ Example command to run order ``all types queue`` test: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_octeontx -- \ --test=order_atq --plcores 1 --wlcores 2,3
@@ -414,7 +411,7 @@ Example command to run perf queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \ + sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \ --test=perf_queue --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0 Example command to run perf queue test with ethernet ports:
@@ -428,7 +425,7 @@ Example command to run perf queue test with event timer adapter: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ --wlcores 4 --plcores 12 --test perf_queue --stlist=a \ --prod_type_timerdev --fwd_latency
@@ -514,14 +511,14 @@ Example command to run perf ``all types queue`` test: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_octeontx -- \ --test=perf_atq --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0 Example command to run perf ``all types queue`` test with event timer adapter: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ --wlcores 4 --plcores 12 --test perf_atq --verbose 20 \ --stlist=a --prod_type_timerdev --fwd_latency
@@ -633,7 +630,7 @@ Example command to run pipeline queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ + sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ --test=pipeline_queue --wlcore=1 --prod_type_ethdev --stlist=a
@@ -725,5 +722,5 @@ Example command to run pipeline queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ + sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ --test=pipeline_atq --wlcore=1 --prod_type_ethdev --stlist=a
Signature · 1 line
2.17.1
Re: [dpdk-dev] [PATCH v5 17/20] doc: remove reference to make from tools guides
Quoted 19 lines
-----Original Message-----
From: Power, Ciara <[email protected]>
Sent: Monday 21 September 2020 14:59
To: [email protected]
Cc: Power, Ciara <[email protected]>; Mcnamara, John <[email protected]>; Kovacevic, Marko <[email protected]>; Doherty, Declan <[email protected]>; Pattan, Reshma <[email protected]>; Tahhan, Maryam <[email protected]>; Chautru, Nicolas <[email protected]>; Jerin Jacob <[email protected]>
Subject: [PATCH v5 17/20] doc: remove reference to make from tools guidesMake is no longer supported for compiling DPDK, references are now removed in the documentation.
Signed-off-by Ciara Power <[email protected]>Reviewed-by Kevin Laatz <[email protected]>Acked-by Nicolas Chautru <[email protected]>
<snip>
Quoted 45 lines
doc/guides/tools/testbbdev.rst +0
-0@@ -13,25 +13,10 @@ parameters passed to a python running script.Compiling the Application
-------------------------doc/guides/tools/testbbdev.rst +1
-2-**Step 1: PMD setting** +**Build the application** -The ``dpdk-test-bbdev`` tool depends on crypto device drivers PMD which -are disabled by default in the build configuration file ``common_base``.
doc/guides/tools/testbbdev.rst +1
-10-The bbdevice drivers PMD which should be tested can be enabled by setting +See :doc:`../linux_gsg/build_dpdk` for compilation steps. - ``CONFIG_RTE_LIBRTE_PMD_<name>=y`` - -Setting example for (*baseband_turbo_sw*) PMD - - ``CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y`` - -**Step 2: Build the application** - -Execute the ``dpdk-setup.sh`` script to build the DPDK library together withthe -``dpdk-test-bbdev`` application.
doc/guides/tools/testbbdev.rst +0
-3- -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries.The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
doc/guides/tools/testbbdev.rst +0
-0@@ -60,7 +45,7 @@ The following are the command-line options:``-p
TESTAPP_PATH, --testapp_path TESTAPP_PATH``
Indicates the path to the bbdev test app. If not specified path is set based
- on *$RTE_SDK* environment variable concatenated with "*/build/app/testbbdev*".
+ on "../.." concatenated with "*/build/app/dpdk-test-bbdev*".``-e
EAL_PARAMS, --eal_params EAL_PARAMS``
Specifies EAL arguments which are passed to the test app. For more details,doc/guides/tools/testbbdev.rst +0
-0@@ -82,9 +67,8 @@ The following are the command-line options:``-v
TEST_VECTOR[TEST_VECTOR...], --test_vectorTEST_VECTOR
Quoted 8 lines
[
TEST_VECTOR...]``
Specifies paths to the test vector files. If not specified path is set based
- on *$RTE_SDK* environment variable concatenated with
- "*/app/test-bbdev/test_vectors/bbdev_null.data*" and indicates default
- data file.
+ on "../.." concatenated with "*/app/test- bbdev/test_vectors/bbdev_null.data*"
+and indicates default data file.
I missed an indent here, there should be a space before "and" at the start of the line I think.
- Ciara
Quoted 6 lines
**Example usage:**
doc/guides/tools/testbbdev.rst +0
-0@@ -259,8 +243,8 @@ They are chosen to have a good coverage across sizesand processing parameters while still keeping their number limited as part of sanity regression.
<snip>
PATCH v5 18/20 doc: remove references to make from contributing guide
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
---
v5:
- Removed reference to test-build.sh used for Make.
- Added point back in for handling specific code, reworded as necessary.
- Added library statistics section, removing only the mention of CONFIG options.
--- doc/guides/contributing/design.rst | 41 ++++++++--------------- doc/guides/contributing/documentation.rst | 31 ++++------------- doc/guides/contributing/patches.rst | 6 ++-- 3 files changed, 23 insertions(+), 55 deletions(-)
doc/guides/contributing/design.rst +14 -27
@@ -21,7 +21,7 @@ A file located in a subdir of "linux" is specific to this execution environment. When absolutely necessary, there are several ways to handle specific code: -* Use a ``#ifdef`` with the CONFIG option in the C code. +* Use a ``#ifdef`` with a build definition macro in the C code. This can be done when the differences are small and they can be embedded in the same C file: .. code-block:: c
@@ -32,30 +32,25 @@ When absolutely necessary, there are several ways to handle specific code: titi(); #endif -* Use the CONFIG option in the Makefile. This is done when the differences are more significant. - In this case, the code is split into two separate files that are architecture or environment specific. - This should only apply inside the EAL library. - -.. note:: - - As in the linux kernel, the ``CONFIG_`` prefix is not used in C code. - This is only needed in Makefiles or shell scripts. +* Use build definition macros and conditions in the Meson build file. This is done when the differences + are more significant. In this case, the code is split into two separate files that are architecture + or environment specific. This should only apply inside the EAL library. Per Architecture Sources ~~~~~~~~~~~~~~~~~~~~~~~~ -The following config options can be used: +The following macro options can be used: -* ``CONFIG_RTE_ARCH`` is a string that contains the name of the architecture. -* ``CONFIG_RTE_ARCH_I686``, ``CONFIG_RTE_ARCH_X86_64``, ``CONFIG_RTE_ARCH_X86_64_32`` or ``CONFIG_RTE_ARCH_PPC_64`` are defined only if we are building for those architectures. +* ``RTE_ARCH`` is a string that contains the name of the architecture. +* ``RTE_ARCH_I686``, ``RTE_ARCH_X86_64``, ``RTE_ARCH_X86_64_32`` or ``RTE_ARCH_PPC_64`` are defined only if we are building for those architectures. Per Execution Environment Sources ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The following config options can be used: +The following macro options can be used: -* ``CONFIG_RTE_EXEC_ENV`` is a string that contains the name of the executive environment. -* ``CONFIG_RTE_EXEC_ENV_FREEBSD`` or ``CONFIG_RTE_EXEC_ENV_LINUX`` are defined only if we are building for this execution environment. +* ``RTE_EXEC_ENV`` is a string that contains the name of the executive environment. +* ``RTE_EXEC_ENV_FREEBSD`` or ``RTE_EXEC_ENV_LINUX`` are defined only if we are building for this execution environment. Mbuf features -------------
@@ -87,22 +82,14 @@ requirements for preventing ABI changes when implementing statistics. Mechanism to allow the application to turn library statistics on and off ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Each library that maintains statistics counters should provide a single build -time flag that decides whether the statistics counter collection is enabled or -not. This flag should be exposed as a variable within the DPDK configuration -file. When this flag is set, all the counters supported by current library are +Having runtime support for enabling/disabling library statistics is recommended, +as build-time options should be avoided. However, if build-time options are used, +for example as in the table library, the options can be set using c_args. +When this flag is set, all the counters supported by current library are collected for all the instances of every object type provided by the library. When this flag is cleared, none of the counters supported by the current library are collected for any instance of any object type provided by the library: -.. code-block:: console - - # DPDK file config/common_linux, config/common_freebsd, etc. - CONFIG_RTE_<LIBRARY_NAME>_STATS_COLLECT=y/n - -The default value for this DPDK configuration file variable (either "yes" or -"no") is decided by each library. - Prevention of ABI changes due to library statistics support ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
doc/guides/contributing/documentation.rst +6 -25
@@ -222,25 +222,14 @@ Build commands ~~~~~~~~~~~~~~ The documentation is built using the standard DPDK build system. -Some examples are shown below: -* Generate all the documentation targets:: +To enable doc building:: - make doc + meson configure -Denable_docs=true -* Generate the Doxygen API documentation in Html:: +See :doc:`../linux_gsg/build_dpdk` for more detail on compiling DPDK with meson. - make doc-api-html - -* Generate the guides documentation in Html:: - - make doc-guides-html - -* Generate the guides documentation in Pdf:: - - make doc-guides-pdf - -The output of these commands is generated in the ``build`` directory:: +The output is generated in the ``build`` directory:: build/doc |-- html
@@ -255,10 +244,6 @@ The output of these commands is generated in the ``build`` directory:: Make sure to fix any Sphinx or Doxygen warnings when adding or updating documentation. -The documentation output files can be removed as follows:: - - make doc-clean - Document Guidelines -------------------
@@ -308,7 +293,7 @@ Line Length Long literal command lines can be shown wrapped with backslashes. For example:: - testpmd -l 2-3 -n 4 \ + dpdk-testpmd -l 2-3 -n 4 \ --vdev=virtio_user0,path=/dev/vhost-net,queues=2,queue_size=1024 \ -- -i --tx-offloads=0x0000002c --enable-lro --txq=2 --rxq=2 \ --txd=1024 --rxd=1024
@@ -460,7 +445,7 @@ Code and Literal block sections For long literal lines that exceed that limit try to wrap the text at sensible locations. For example a long command line could be documented like this and still work if copied directly from the docs:: - build/app/testpmd -l 0-2 -n3 --vdev=net_pcap0,iface=eth0 \ + ./<build_dir>/app/dpdk-testpmd -l 0-2 -n3 --vdev=net_pcap0,iface=eth0 \ --vdev=net_pcap1,iface=eth1 \ -- -i --nb-cores=2 --nb-ports=2 \ --total-num-mbufs=2048
@@ -743,9 +728,5 @@ The following are some guidelines for use of Doxygen in the DPDK API documentati /** Array of physical page addresses for the mempool buffer. */ phys_addr_t elt_pa[MEMPOOL_PG_NUM_DEFAULT]; -* Check for Doxygen warnings in new code by checking the API documentation build:: - - make doc-api-html >/dev/null - * Read the rendered section of the documentation that you have added for correctness, clarity and consistency with the surrounding text.
doc/guides/contributing/patches.rst +3 -3
@@ -486,9 +486,9 @@ By default, ABI compatibility checks are disabled. To enable them, a reference version must be selected via the environment variable ``DPDK_ABI_REF_VERSION``. -The ``devtools/test-build.sh`` and ``devtools/test-meson-builds.sh`` scripts -then build this reference version in a temporary directory and store the -results in a subfolder of the current working directory. +The ``devtools/test-meson-builds.sh`` script then build this reference version +in a temporary directory and store the results in a subfolder of the current +working directory. The environment variable ``DPDK_ABI_REF_DIR`` can be set so that the results go to a different location.
Signature · 1 line
2.17.1
PATCH v5 19/20 doc: add to release notes to reflect removal of make
In reply to Ciara PowerAdded an entry to decribe the removal of the Make build system to the release notes for 20.11.
--- doc/guides/rel_notes/release_20_11.rst | 3 +++ 1 file changed, 3 insertions(+)
doc/guides/rel_notes/release_20_11.rst +3 -0
@@ -68,6 +68,9 @@ Removed Items Also, make sure to start the actual text at the margin. ======================================================= +* build: Support for the Make build system was removed for compiling DPDK, Meson + is now the primary build system. Sample applications can still be built with + Make standalone, using pkg-config. API Changes -----------
Signature · 1 line
2.17.1
PATCH v5 20/20 doc: update patch cheatsheet to use meson
In reply to Ciara PowerFrom: Kevin Laatz <[email protected]>
With 'make' being removed, the patch cheatsheet needs to be updated to remove any references to 'make'. These references have been replaced with meson alternatives in this patch.
--- .../contributing/img/patch_cheatsheet.svg | 582 ++++++++---------- 1 file changed, 270 insertions(+), 312 deletions(-)
doc/guides/contributing/img/patch_cheatsheet.svg +270 -312
@@ -1,6 +1,4 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> - <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#"
@@ -13,7 +11,7 @@ width="210mm" height="297mm" id="svg2985" - inkscape:version="0.48.4 r9939" + inkscape:version="1.0.1 (3bc2e813f5, 2020-09-07)" sodipodi:docname="patch_cheatsheet.svg"> <sodipodi:namedview pagecolor="#ffffff"
@@ -24,17 +22,19 @@ guidetolerance="10" inkscape:pageopacity="0" inkscape:pageshadow="2" - inkscape:window-width="1184" - inkscape:window-height="1822" + inkscape:window-width="1920" + inkscape:window-height="1017" id="namedview274" showgrid="false" - inkscape:zoom="1.2685914" - inkscape:cx="289.93958" - inkscape:cy="509.84194" - inkscape:window-x="0" - inkscape:window-y="19" - inkscape:window-maximized="0" - inkscape:current-layer="g3272" /> + inkscape:zoom="0.89702958" + inkscape:cx="246.07409" + inkscape:cy="416.76022" + inkscape:window-x="1072" + inkscape:window-y="-8" + inkscape:window-maximized="1" + inkscape:current-layer="layer1" + inkscape:document-rotation="0" + inkscape:snap-grids="false" /> <defs id="defs3"> <linearGradient
@@ -549,347 +549,336 @@ </g> </switch> <g - transform="matrix(0.89980358,0,0,0.89980358,45.57817,-2.8793563)" + transform="matrix(0.89980358,0,0,0.89980358,57.57817,-2.8793563)" id="g4009"> <text x="325.02054" y="107.5126" id="text3212" xml:space="preserve" - style="font-size:43.11383057px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:43.1138px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none" transform="scale(1.193782,0.83767389)"><tspan x="325.02054" y="107.5126" - id="tspan3214">CHEATSHEET</tspan></text> + id="tspan3214" + style="font-family:monospace">CHEATSHEET</tspan></text> <text x="386.51117" y="58.178116" transform="scale(1.0054999,0.99453018)" id="text3212-1" xml:space="preserve" - style="font-size:42.11373901px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:42.1137px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="386.51117" y="58.178116" - id="tspan3214-7">PATCH SUBMIT</tspan></text> + id="tspan3214-7" + style="font-family:monospace">PATCH SUBMIT</tspan></text> </g> <rect - width="714.94495" - height="88.618027" - rx="20.780111" - ry="15.96909" - x="14.574773" - y="7.0045133" + width="759.50977" + height="88.591248" + rx="22.075403" + ry="15.964265" + x="14.588161" + y="7.0179014" id="rect3239" - style="fill:none;stroke:#00233b;stroke-width:0.87678075;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.903557;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <rect - width="713.28113" - height="887.29156" - rx="17.656931" - ry="17.280584" - x="15.406689" - y="104.73515" + width="757.84167" + height="887.2605" + rx="18.760006" + ry="17.27998" + x="15.422211" + y="104.75068" id="rect3239-0" - style="fill:none;stroke:#00233b;stroke-width:1.00973284;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1.04078;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <rect - width="694.94904" - height="381.31" - rx="9.4761629" - ry="9.0904856" - x="24.336016" - y="601.75836" + width="732.82446" + height="381.28253" + rx="9.9926233" + ry="9.0898304" + x="24.349754" + y="601.77209" id="rect3239-0-9-4" - style="fill:none;stroke:#00233b;stroke-width:1.02322531;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1.0507;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <path - d="m 386.3921,327.23442 323.14298,0" + d="M 422.0654,327.23442 H 709.53508" id="path4088" - style="fill:none;stroke:#00233b;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + style="fill:none;stroke:#00233b;stroke-width:0.943189px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" inkscape:connector-curvature="0" /> <text - x="396.18015" + x="428.18015" y="314.45731" id="text4090" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="396.18015" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="428.18015" y="314.45731" id="tspan4092" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Patch Pre-Checks</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Patch Pre-Checks</tspan></text> <text x="43.44949" y="147.32129" id="text4090-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.44949" y="147.32129" id="tspan4092-3" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Commit Pre-Checks</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Commit Pre-Checks</tspan></text> <text - x="397.1235" + x="429.1235" y="144.8549" id="text4090-4-3" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="397.1235" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="429.1235" y="144.8549" id="tspan4092-3-3" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Bugfix?</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Bugfix?</tspan></text> <text x="41.215897" y="634.38617" id="text4090-1" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="41.215897" y="634.38617" id="tspan4092-38" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Git send-email </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Git send-email </tspan></text> <path d="m 31.232443,642.80575 376.113467,0" id="path4088-7" style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" inkscape:connector-curvature="0" /> <rect - width="342.13785" - height="230.74609" - rx="10.411126" - ry="10.411126" - x="25.418407" - y="114.92036" + width="376.65033" + height="230.70007" + rx="11.461329" + ry="10.40905" + x="25.441414" + y="114.94337" id="rect3239-0-9-4-2" - style="fill:none;stroke:#00233b;stroke-width:0.93674862;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.982762;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <text x="43.44949" y="385.8045" id="text4090-86" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.44949" y="385.8045" id="tspan4092-5" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Compile Pre-Checks</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Compile Pre-Checks</tspan></text> <g - transform="translate(352.00486,-348.25973)" + transform="matrix(1.0077634,0,0,1,384.57109,-348.25973)" id="g3295"> <text x="43.87738" y="568.03088" id="text4090-8-14" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.87738" y="568.03088" id="tspan4289" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Include warning/error</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Include warning/error</tspan></text> <text x="43.87738" y="537.71906" id="text4090-8-14-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.87738" y="537.71906" id="tspan4289-1" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Fixes: line</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Fixes: line</tspan></text> <text x="43.87738" y="598.9939" id="text4090-8-14-0" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.87738" y="598.9939" id="tspan4289-2" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ How to reproduce</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ How to reproduce</tspan></text> </g> <g - transform="translate(-2.6258125,-26.708615)" + transform="matrix(0.88614399,0,0,1.0199334,-5.7864591,-38.84504)" id="g4115"> <g id="g3272"> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1" y="454.36987" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7" y="454.36987" x="49.093246">+ build gcc icc clang </tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" + xml:space="preserve" + id="text581" + y="454.36987" + x="49.093246" /> + <text + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2" y="516.59979" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79" y="516.59979" - x="49.093246">+ make test doc </tspan></text> + x="49.093246">+ meson -Denable_docs=true</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2-0-0" y="544.71033" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79-9-0" y="544.71033" - x="49.093246">+ make examples</tspan></text> + x="49.093246">+ meson -Dexamples=all</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2-0-07" y="576.83533" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79-9-3" y="576.83533" - x="49.093246">+ make shared-lib</tspan></text> + x="49.093246" + transform="matrix(1.0305467,0,0,1,-1.5447426,0)">+ meson -Ddefault_library=shared</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2-0-07-4" y="604.88947" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79-9-3-9" y="604.88947" x="49.093246">+ library ABI version</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2-9" y="486.56659" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79-3" y="486.56659" x="49.093246">+ build 32 and 64 bits</tspan></text> </g> </g> <text - x="74.388756" - y="914.65686" + x="72.598656" + y="937.21002" id="text4090-8-1-8-65-9" xml:space="preserve" - style="font-size:19px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12.2959px;line-height:0%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1.02466" + transform="scale(1.0246575,0.97593587)"><tspan sodipodi:role="line" id="tspan3268" - x="74.388756" - y="914.65686">git send-email *.patch --annotate --to <maintainer></tspan><tspan + x="72.598656" + y="937.21002" + style="font-size:19.4685px;line-height:1.25;font-family:monospace;stroke-width:1.02466">git send-email *.patch --annotate --to <maintainer></tspan><tspan sodipodi:role="line" id="tspan3272" - x="74.388756" - y="938.40686"> --cc [email protected] [ --cc [email protected]</tspan><tspan + x="72.598656" + y="961.54565" + style="font-size:19.4685px;line-height:1.25;font-family:monospace;stroke-width:1.02466"> --cc [email protected] [ --cc [email protected]</tspan><tspan sodipodi:role="line" - x="74.388756" - y="962.15686" - id="tspan3266"> --cover-letter -v[N] --in-reply-to <message ID> ]</tspan></text> + x="72.598656" + y="985.88129" + id="tspan3266" + style="font-size:19.4685px;line-height:1.25;font-family:monospace;stroke-width:1.02466"> --cover-letter -v[N] --in-reply-to <message ID> ]</tspan></text> <text x="543.47675" y="1032.3459" id="text4090-8-7-8-7-6-3-8-2-5" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="543.47675" y="1032.3459" id="tspan4092-8-6-3-1-8-4-4-5-3" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">[email protected]</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">[email protected]</tspan></text> <rect - width="678.14105" - height="87.351799" - rx="6.7972355" - ry="6.7972355" - x="31.865864" - y="888.44696" + width="711.56055" + height="87.327599" + rx="7.1322103" + ry="6.795352" + x="31.877964" + y="888.45905" id="rect3239-0-9-4-3" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1.0242;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <text x="543.29498" y="1018.1843" id="text4090-8-7-8-7-6-3-8-2-5-3" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="543.29498" y="1018.1843" id="tspan4092-8-6-3-1-8-4-4-5-3-7" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Suggestions / Updates?</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Suggestions / Updates?</tspan></text> <g id="g3268" transform="translate(0,-6)"> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8" y="704.07019" x="41.658669"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6" y="704.07019" x="41.658669">+ Patch version ( eg: -v2 ) </tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-0" y="736.29175" x="41.658669"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-2" y="736.29175" x="41.658669">+ Patch version annotations</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-6" y="766.70355" x="41.911205"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-1" y="766.70355" x="41.911205">+ Send --to maintainer </tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-6-3" y="795.30548" x="41.658669"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-1-8" y="795.30548" x="41.658669">+ Send --cc [email protected] </tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-9" y="675.25287" x="41.658669"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-9" y="675.25287" x="41.658669">+ Cover letter</tspan></text>
@@ -897,73 +886,70 @@ id="g3303" transform="translate(1.0962334,-40.034939)"> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-65" y="868.70337" x="41.572586"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-10" y="868.70337" x="41.572586">+ Send --in-reply-to <message ID><tspan - style="font-size:20px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:20px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan3184" /></tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:25.6917057px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:25.6917px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-9-1" y="855.79816" x="460.18405"><tspan - style="font-size:11.56126785px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:11.5613px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-9-7" y="855.79816" x="460.18405">****</tspan></text> </g> </g> <text - x="685.67828" + x="697.67828" y="76.55056" id="text4090-8-1-8-9-1-9" xml:space="preserve" - style="font-size:20.20989037px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="685.67828" + style="font-style:normal;font-weight:normal;font-size:20.2099px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="697.67828" y="76.55056" id="tspan4092-8-7-6-9-7-4" - style="font-size:9.09445095px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">v1.0</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:9.09445px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">v2.0</tspan></text> <rect - width="342.3053" - height="155.54948" - rx="9.2344503" - ry="9.2344503" - x="377.58942" - y="114.55766" + width="347.40179" + height="155.50351" + rx="9.3719397" + ry="9.2317209" + x="412.60239" + y="114.58065" id="rect3239-0-9-4-2-1" - style="fill:none;stroke:#00233b;stroke-width:0.76930124;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.774892;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <rect - width="342.12564" - height="236.79482" - rx="10.647112" - ry="9.584527" - x="25.642178" - y="356.86249" + width="377.75555" + height="234.52185" + rx="11.755931" + ry="9.4925261" + x="25.663876" + y="356.88416" id="rect3239-0-9-4-2-0" - style="fill:none;stroke:#00233b;stroke-width:0.9489302;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.99232;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <rect - width="341.98428" - height="312.73181" - rx="8.5358429" - ry="8.5358429" - x="377.96762" - y="280.45331" + width="343.53604" + height="312.67508" + rx="8.5745735" + ry="8.5342941" + x="414.29037" + y="280.48166" id="rect3239-0-9-4-2-1-9" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1.00217;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <path - d="m 387.02742,157.3408 323.14298,0" + d="M 419.35634,157.3408 H 710.1704" id="path4088-8" - style="fill:none;stroke:#00233b;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + style="fill:none;stroke:#00233b;stroke-width:0.94866px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" inkscape:connector-curvature="0" /> <path d="m 36.504486,397.33869 323.142974,0"
@@ -971,9 +957,9 @@ style="fill:none;stroke:#00233b;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" inkscape:connector-curvature="0" /> <path - d="m 35.494337,156.92238 323.142983,0" + d="M 35.494337,156.92238 H 372.01481" id="path4088-4" - style="fill:none;stroke:#00233b;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + style="fill:none;stroke:#00233b;stroke-width:1.02049px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" inkscape:connector-curvature="0" /> <g transform="translate(1.0962334,-30.749225)"
@@ -983,45 +969,41 @@ y="214.1572" id="text4090-8-11" xml:space="preserve" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="214.1572" id="tspan4092-8-52" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Signed-off-by: </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Signed-off-by: </tspan></text> <text x="45.371201" y="243.81795" id="text4090-8-7-8" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="243.81795" id="tspan4092-8-6-3" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Suggested-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Suggested-by:</tspan></text> <text x="45.371201" y="273.90939" id="text4090-8-7-8-7" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="273.90939" id="tspan4092-8-6-3-1" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Reported-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Reported-by:</tspan></text> <text x="45.371201" y="304.00082" id="text4090-8-7-8-7-6" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="304.00082" id="tspan4092-8-6-3-1-8" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Tested-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Tested-by:</tspan></text> <g id="g3297" transform="translate(1.1147904,-7.2461378)">
@@ -1030,110 +1012,102 @@ y="368.8187" id="text4090-8-7-8-7-6-3" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="368.8187" id="tspan4092-8-6-3-1-8-4" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Previous Acks</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Previous Acks</tspan></text> <text x="235.24362" y="360.3028" id="text4090-8-1-8-9-1-4" xml:space="preserve" - style="font-size:25.6917057px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:25.6917px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="235.24362" y="360.3028" id="tspan4092-8-7-6-9-7-0" - style="font-size:11.56126785px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:11.5613px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> </g> <text x="45.371201" y="334.52298" id="text4090-8-7-8-7-6-3-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="334.52298" id="tspan4092-8-6-3-1-8-4-0" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Commit message</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Commit message</tspan></text> </g> <rect width="295.87207" height="164.50136" rx="7.3848925" ry="4.489974" - x="414.80502" + x="444.80502" y="611.47064" id="rect3239-0-9-4-2-1-9-9" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <text - x="439.4429" + x="469.4429" y="638.35608" id="text4090-1-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="439.4429" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="469.4429" y="638.35608" id="tspan4092-38-8" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Mailing List</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Mailing List</tspan></text> <text - x="431.55353" + x="461.55353" y="675.59857" id="text4090-8-5-6-9-4-6-6-8" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="431.55353" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="461.55353" y="675.59857" id="tspan4092-8-5-5-3-4-0-6-2" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Acked-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Acked-by:</tspan></text> <text - x="431.39734" + x="461.39734" y="734.18231" id="text4090-8-5-6-9-4-6-6-8-5" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="431.39734" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="461.39734" y="734.18231" id="tspan4092-8-5-5-3-4-0-6-2-1" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Reviewed-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Reviewed-by:</tspan></text> <text - x="450.8428" + x="480.8428" y="766.5578" id="text4090-8-5-6-9-4-6-6-8-7" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="450.8428" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="480.8428" y="766.5578" id="tspan4092-8-5-5-3-4-0-6-2-11" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Nack (refuse patch)</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Nack (refuse patch)</tspan></text> <path - d="m 426.99385,647.80575 272.72607,0" + d="M 456.99385,647.80575 H 729.71992" id="path4088-7-5" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" + style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" inkscape:connector-curvature="0" /> <path - d="m 424.7332,742.35699 272.72607,0" + d="M 454.7332,742.35699 H 727.45927" id="path4088-7-5-2" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" + style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" inkscape:connector-curvature="0" /> <text - x="431.39734" + x="461.39734" y="704.78278" id="text4090-8-5-6-9-4-6-6-8-5-1" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="431.39734" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="461.39734" y="704.78278" id="tspan4092-8-5-5-3-4-0-6-2-1-7" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Tested-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Tested-by:</tspan></text> <g transform="translate(1.0962334,-2.7492248)" id="g3613">
@@ -1142,22 +1116,21 @@ y="1007.5879" id="text4090-8-7-8-7-6-3-8" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.146141" y="1007.5879" id="tspan4092-8-6-3-1-8-4-4" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">Previous Acks only when fixing typos, rebased, or checkpatch issues.</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">Previous Acks only when fixing typos, rebased, or checkpatch issues.</tspan></text> <text x="30.942892" y="1011.3757" id="text4090-8-7-8-7-6-3-8-4-1" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="30.942892" y="1011.3757" id="tspan4092-8-6-3-1-8-4-4-55-7" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> </g> <g transform="translate(1.0962334,-2.7492248)"
@@ -1167,35 +1140,34 @@ y="1020.4383" id="text4090-8-7-8-7-6-3-8-4" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="42.176418" y="1020.4383" id="tspan4092-8-6-3-1-8-4-4-55" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">The version.map function names must be in alphabetical order.</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">The version.map function names must be in alphabetical order.</tspan></text> <text x="30.942892" y="1024.2014" id="text4090-8-7-8-7-6-3-8-4-1-5" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="30.942892" y="1024.2014" id="tspan4092-8-6-3-1-8-4-4-55-7-2" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="25.247679" y="1024.2014" id="text4090-8-7-8-7-6-3-8-4-1-5-6" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="25.247679" y="1024.2014" id="tspan4092-8-6-3-1-8-4-4-55-7-2-8" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> </g> <g - transform="translate(1.0962334,-30.749225)" + transform="matrix(1.0211743,0,0,1,25.427515,-30.749225)" id="g3275"> <g id="g3341">
@@ -1204,67 +1176,61 @@ y="390.17807" id="text4090-8" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="390.17807" id="tspan4092-8" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Rebase to git </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Rebase to git </tspan></text> <text x="394.78601" y="420.24835" id="text4090-8-5" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="420.24835" id="tspan4092-8-5" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Checkpatch </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Checkpatch </tspan></text> <text x="394.78601" y="450.53394" id="text4090-8-5-6" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="450.53394" id="tspan4092-8-5-5" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ ABI breakage </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ ABI breakage </tspan></text> <text x="394.78601" y="513.13031" id="text4090-8-5-6-9-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="513.13031" id="tspan4092-8-5-5-3-4" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Maintainers file</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Maintainers file</tspan></text> <text x="394.78601" y="573.48621" id="text4090-8-5-6-9-4-6" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="573.48621" id="tspan4092-8-5-5-3-4-0" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Release notes</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Release notes</tspan></text> <text x="395.79617" y="603.98718" id="text4090-8-5-6-9-4-6-6" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="395.79617" y="603.98718" id="tspan4092-8-5-5-3-4-0-6" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Documentation</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Documentation</tspan></text> <g transform="translate(0,-0.83470152)" id="g3334">
@@ -1276,24 +1242,22 @@ y="468.01297" id="text4090-8-1-8-9-1-4-1" xml:space="preserve" - style="font-size:25.6917057px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:25.6917px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="660.46729" y="468.01297" id="tspan4092-8-7-6-9-7-0-7" - style="font-size:11.56126785px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">**</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:11.5613px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">**</tspan></text> </g> <text x="394.78601" y="483.59955" id="text4090-8-5-6-9" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="483.59955" id="tspan4092-8-5-5-3" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Update version.map</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Update version.map</tspan></text> </g> <g id="g3428"
@@ -1303,12 +1267,11 @@ y="541.38928" id="text4090-8-5-6-9-4-6-1" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="541.38928" id="tspan4092-8-5-5-3-4-0-7" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Doxygen</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Doxygen</tspan></text> <g transform="translate(-119.92979,57.949844)" id="g3267-9">
@@ -1317,28 +1280,26 @@ y="473.13675" id="text4090-8-1-8-9-1-4-1-4" xml:space="preserve" - style="font-size:25.6917057px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:25.6917px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="628.93628" y="473.13675" id="tspan4092-8-7-6-9-7-0-7-8" - style="font-size:11.56126785px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">***</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:11.5613px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">***</tspan></text> </g> </g> </g> </g> <text - x="840.1828" - y="234.34692" - transform="matrix(0.70710678,0.70710678,-0.70710678,0.70710678,0,0)" + x="861.39557" + y="213.1337" + transform="rotate(45)" id="text4090-8-5-6-9-4-6-6-8-7-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="840.1828" - y="234.34692" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="861.39557" + y="213.1337" id="tspan4092-8-5-5-3-4-0-6-2-11-0" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+</tspan></text> <g transform="translate(1.0962334,-2.7492248)" id="g3595">
@@ -1347,42 +1308,41 @@ y="1037.0271" id="text4090-8-7-8-7-6-3-8-4-1-2" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="30.942892" y="1037.0271" id="tspan4092-8-6-3-1-8-4-4-55-7-3" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="25.247679" y="1037.0271" id="text4090-8-7-8-7-6-3-8-4-1-2-5" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="25.247679" y="1037.0271" id="tspan4092-8-6-3-1-8-4-4-55-7-3-7" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="19.552465" y="1037.0271" id="text4090-8-7-8-7-6-3-8-4-1-2-7" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="19.552465" y="1037.0271" id="tspan4092-8-6-3-1-8-4-4-55-7-3-9" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="42.830166" y="1033.2393" id="text4090-8-7-8-7-6-3-8-4-8" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="42.830166" y="1033.2393" id="tspan4092-8-6-3-1-8-4-4-55-2" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">New header files must get a new page in the API docs.</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">New header files must get a new page in the API docs.</tspan></text> </g> <g transform="translate(1.0962334,-2.7492248)"
@@ -1392,52 +1352,51 @@ y="1046.0962" id="text4090-8-7-8-7-6-3-8-2" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="42.212418" y="1046.0962" id="tspan4092-8-6-3-1-8-4-4-5" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">Available from patchwork, or email header. Reply to Cover letters.</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">Available from patchwork, or email header. Reply to Cover letters.</tspan></text> <text x="31.140535" y="1049.8527" id="text4090-8-7-8-7-6-3-8-4-1-2-2" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="31.140535" y="1049.8527" id="tspan4092-8-6-3-1-8-4-4-55-7-3-3" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="25.445322" y="1049.8527" id="text4090-8-7-8-7-6-3-8-4-1-2-5-2" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="25.445322" y="1049.8527" id="tspan4092-8-6-3-1-8-4-4-55-7-3-7-2" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="19.750109" y="1049.8527" id="text4090-8-7-8-7-6-3-8-4-1-2-7-1" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="19.750109" y="1049.8527" id="tspan4092-8-6-3-1-8-4-4-55-7-3-9-6" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="14.016749" y="1049.8527" id="text4090-8-7-8-7-6-3-8-4-1-2-7-1-8" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="14.016749" y="1049.8527" id="tspan4092-8-6-3-1-8-4-4-55-7-3-9-6-5" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> </g> <rect width="196.44218"
@@ -1449,36 +1408,35 @@ id="rect3239-0-9-4-2-1-9-9-7" style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> <rect - width="678.43036" - height="43.497677" - rx="7.8557949" - ry="6.7630997" - x="31.274473" - y="836.69745" + width="710.73767" + height="43.476074" + rx="8.2298937" + ry="6.7597408" + x="31.285275" + y="836.70825" id="rect3239-0-9-4-3-6" - style="fill:none;stroke:#00233b;stroke-width:0.92794865;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.949551;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <text x="73.804535" y="864.28137" id="text4090-8-1-8-65-9-1" xml:space="preserve" - style="font-size:19px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:0%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan sodipodi:role="line" x="73.804535" y="864.28137" - id="tspan3266-8">git format-patch -[N]</tspan></text> + id="tspan3266-8" + style="font-size:19px;line-height:1.25;font-family:monospace">git format-patch -[N]</tspan></text> <text x="342.70221" y="862.83478" id="text4090-8-1-8-65-9-1-7" xml:space="preserve" - style="font-size:19px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:0%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan sodipodi:role="line" x="342.70221" y="862.83478" id="tspan3266-8-2" - style="font-size:14px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">// creates .patch files for final review</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:14px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">// creates .patch files for final review</tspan></text> </g> </svg>
Signature · 1 line
2.17.1
Quoted 8 lines
This patchset includes the remaining 18 patches that were not merged along with the others in v4, pending rework and more review. *All*, please make the documentation update your highest priority.
v5:
- Added patch to update cheatsheet.
- Added patch to update release notes.
- Fixed outstanding comments on v3/v4.
We are progressing.
The first six patches of this v5 are merged with discussed updates.
Most of the remaining patches are about drivers.
We miss drivers maintainers to review the changes to their doc. PLEASE REVIEW
One way of doing global changes could be to ask all maintainers to do their own cleanup. But Ciara did the global cleanup already. All you have to do is to review and give feedbacks.
Why is it so complicate to get reviews?
Probably maintainers don't read such patches where they are Cc'ed. In order to avoid such situations making global changes difficult, I think we should block merging of drivers patches until drivers maintainers do their job.
v6 cover remove make support in DPDK
In reply to Ciara PowerThis patchset includes the remaining 14 patches that were not merged along with the others in v4/v5, pending rework and more review. *All*, please make the documentation update your highest priority.
v6:
- Rebased onto main and fixed conflicts.
- Fixed some formatting and indentation.
- Reworded some commit logs and fixed spellings.
v5:
- Added patch to update cheatsheet.
- Added patch to update release notes.
- Fixed outstanding comments on v3/v4.
v4: rearrange commits and fix as commented
v3: Fixed comments on v2.
v2:
- Fixed comments on v1.
- Removed additional make references.
- Added some meson replacements where necessary.
- Added dummy root Makefile.
As previously decided [1] and communicated via deprecation notice [2], the make build system is to be removed in the 20.11 release.
This patchset removes support for compiling DPDK with the legacy make build system. Some make support is maintained for example applications, where pkg-config is used rather than the legacy make method.
References to the make build system are removed from all documentation, please review to see if replacement meson instructions are needed in some cases.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
[2] http://git.dpdk.org/dpdk/commit/?id=a5449d78d1413e7bd1d66f6e70884e46cfb5e673
Ciara Power (13):
doc: remove references to make from platforms guides
doc: remove references to make from mempool guide
doc: remove references to make from NICs guides
doc: remove references to make from vdpadevs guides
doc: remove references to make from bbdevs guides
doc: remove references to make from cryptodevs guides
doc: remove references to make from compressdevs guides
doc: remove references to make from eventdevs guides
doc: remove references to make from rawdevs guides
doc: remove references to make from app guides
doc: remove reference to make from tools guides
doc: remove references to make from contributing guide
doc: add to release notes to reflect removal of make
Kevin Laatz (1):
doc: update patch cheatsheet to use meson
doc/guides/bbdevs/fpga_5gnr_fec.rst | 5 +- doc/guides/bbdevs/fpga_lte_fec.rst | 5 +- doc/guides/bbdevs/turbo_sw.rst | 23 +- doc/guides/compressdevs/isal.rst | 4 - doc/guides/compressdevs/octeontx.rst | 24 +- doc/guides/compressdevs/zlib.rst | 4 - doc/guides/contributing/design.rst | 41 +- doc/guides/contributing/documentation.rst | 31 +- .../contributing/img/patch_cheatsheet.svg | 582 ++++++++---------- doc/guides/contributing/patches.rst | 6 +- doc/guides/cryptodevs/aesni_gcm.rst | 4 +- doc/guides/cryptodevs/aesni_mb.rst | 4 +- doc/guides/cryptodevs/armv8.rst | 3 - doc/guides/cryptodevs/caam_jr.rst | 30 - doc/guides/cryptodevs/ccp.rst | 12 +- doc/guides/cryptodevs/dpaa2_sec.rst | 25 - doc/guides/cryptodevs/dpaa_sec.rst | 25 - doc/guides/cryptodevs/kasumi.rst | 11 +- doc/guides/cryptodevs/mvsam.rst | 10 +- doc/guides/cryptodevs/nitrox.rst | 7 - doc/guides/cryptodevs/null.rst | 2 +- doc/guides/cryptodevs/octeontx.rst | 12 +- doc/guides/cryptodevs/octeontx2.rst | 8 +- doc/guides/cryptodevs/openssl.rst | 6 +- doc/guides/cryptodevs/qat.rst | 65 +- doc/guides/cryptodevs/scheduler.rst | 8 - doc/guides/cryptodevs/snow3g.rst | 10 +- doc/guides/cryptodevs/virtio.rst | 20 +- doc/guides/cryptodevs/zuc.rst | 10 +- doc/guides/eventdevs/dpaa.rst | 20 - doc/guides/eventdevs/dpaa2.rst | 20 - doc/guides/eventdevs/octeontx.rst | 24 - doc/guides/eventdevs/octeontx2.rst | 8 - doc/guides/mempool/octeontx.rst | 28 +- doc/guides/mempool/octeontx2.rst | 10 +- doc/guides/nics/ark.rst | 7 +- doc/guides/nics/atlantic.rst | 4 - doc/guides/nics/axgbe.rst | 15 - doc/guides/nics/bnx2x.rst | 27 - doc/guides/nics/bnxt.rst | 5 +- doc/guides/nics/build_and_test.rst | 6 +- doc/guides/nics/cxgbe.rst | 36 +- doc/guides/nics/dpaa.rst | 27 +- doc/guides/nics/dpaa2.rst | 26 +- doc/guides/nics/ena.rst | 16 - doc/guides/nics/enetc.rst | 2 - doc/guides/nics/enic.rst | 9 - doc/guides/nics/fail_safe.rst | 20 +- doc/guides/nics/features.rst | 9 - doc/guides/nics/fm10k.rst | 4 - doc/guides/nics/hinic.rst | 9 - doc/guides/nics/hns3.rst | 10 - doc/guides/nics/i40e.rst | 44 +- doc/guides/nics/ice.rst | 25 +- doc/guides/nics/igc.rst | 18 +- doc/guides/nics/intel_vf.rst | 13 +- doc/guides/nics/ionic.rst | 8 - doc/guides/nics/ipn3ke.rst | 12 +- doc/guides/nics/kni.rst | 4 +- doc/guides/nics/liquidio.rst | 27 - doc/guides/nics/memif.rst | 10 +- doc/guides/nics/mlx4.rst | 55 +- doc/guides/nics/mlx5.rst | 62 +- doc/guides/nics/mvneta.rst | 36 +- doc/guides/nics/mvpp2.rst | 43 +- doc/guides/nics/nfb.rst | 19 +- doc/guides/nics/nfp.rst | 4 - doc/guides/nics/null.rst | 6 +- doc/guides/nics/octeontx.rst | 19 +- doc/guides/nics/octeontx2.rst | 13 +- doc/guides/nics/pcap_ring.rst | 24 +- doc/guides/nics/qede.rst | 17 +- doc/guides/nics/sfc_efx.rst | 15 - doc/guides/nics/softnic.rst | 13 +- doc/guides/nics/szedata2.rst | 18 +- doc/guides/nics/thunderx.rst | 25 +- doc/guides/nics/vdev_netvsc.rst | 6 - doc/guides/nics/vhost.rst | 2 +- doc/guides/nics/virtio.rst | 4 +- doc/guides/platform/bluefield.rst | 22 - doc/guides/platform/octeontx.rst | 33 +- doc/guides/platform/octeontx2.rst | 32 - doc/guides/rawdevs/dpaa2_cmdif.rst | 21 - doc/guides/rawdevs/dpaa2_qdma.rst | 21 - doc/guides/rawdevs/ifpga.rst | 10 - doc/guides/rawdevs/ntb.rst | 6 - doc/guides/rawdevs/octeontx2_dma.rst | 12 - doc/guides/rawdevs/octeontx2_ep.rst | 8 - doc/guides/rel_notes/release_20_11.rst | 4 + doc/guides/sample_app_ug/bbdev_app.rst | 34 +- doc/guides/sample_app_ug/cmd_line.rst | 2 +- doc/guides/sample_app_ug/compiling.rst | 83 +-- doc/guides/sample_app_ug/dist_app.rst | 4 +- doc/guides/sample_app_ug/ethtool.rst | 2 +- .../sample_app_ug/eventdev_pipeline.rst | 3 +- doc/guides/sample_app_ug/fips_validation.rst | 10 +- doc/guides/sample_app_ug/flow_classify.rst | 4 +- doc/guides/sample_app_ug/flow_filtering.rst | 25 +- doc/guides/sample_app_ug/hello_world.rst | 2 +- doc/guides/sample_app_ug/ioat.rst | 6 +- doc/guides/sample_app_ug/ip_frag.rst | 6 +- doc/guides/sample_app_ug/ip_pipeline.rst | 4 +- doc/guides/sample_app_ug/ip_reassembly.rst | 9 +- doc/guides/sample_app_ug/ipsec_secgw.rst | 14 +- doc/guides/sample_app_ug/ipv4_multicast.rst | 4 +- doc/guides/sample_app_ug/keep_alive.rst | 4 +- .../sample_app_ug/kernel_nic_interface.rst | 14 +- doc/guides/sample_app_ug/l2_forward_cat.rst | 4 +- .../sample_app_ug/l2_forward_crypto.rst | 4 +- doc/guides/sample_app_ug/l2_forward_event.rst | 10 +- .../sample_app_ug/l2_forward_job_stats.rst | 4 +- .../sample_app_ug/l2_forward_real_virtual.rst | 6 +- doc/guides/sample_app_ug/l3_forward.rst | 10 +- .../sample_app_ug/l3_forward_access_ctrl.rst | 6 +- doc/guides/sample_app_ug/l3_forward_graph.rst | 4 +- .../sample_app_ug/l3_forward_power_man.rst | 14 +- doc/guides/sample_app_ug/link_status_intr.rst | 4 +- doc/guides/sample_app_ug/multi_process.rst | 20 +- doc/guides/sample_app_ug/ntb.rst | 2 +- doc/guides/sample_app_ug/packet_ordering.rst | 3 +- .../sample_app_ug/performance_thread.rst | 44 +- doc/guides/sample_app_ug/ptpclient.rst | 9 +- doc/guides/sample_app_ug/qos_metering.rst | 2 +- doc/guides/sample_app_ug/qos_scheduler.rst | 10 +- doc/guides/sample_app_ug/rxtx_callbacks.rst | 9 +- doc/guides/sample_app_ug/server_node_efd.rst | 2 +- doc/guides/sample_app_ug/service_cores.rst | 23 +- doc/guides/sample_app_ug/skeleton.rst | 2 +- doc/guides/sample_app_ug/tep_termination.rst | 43 +- doc/guides/sample_app_ug/test_pipeline.rst | 4 +- doc/guides/sample_app_ug/timer.rst | 2 +- doc/guides/sample_app_ug/vdpa.rst | 4 +- doc/guides/sample_app_ug/vhost.rst | 11 +- doc/guides/sample_app_ug/vhost_blk.rst | 2 +- doc/guides/sample_app_ug/vhost_crypto.rst | 2 +- .../sample_app_ug/vm_power_management.rst | 34 +- .../sample_app_ug/vmdq_dcb_forwarding.rst | 8 +- doc/guides/sample_app_ug/vmdq_forwarding.rst | 8 +- doc/guides/testpmd_app_ug/run_app.rst | 6 +- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 +- doc/guides/tools/comp_perf.rst | 10 +- doc/guides/tools/cryptoperf.rst | 20 +- doc/guides/tools/pdump.rst | 15 +- doc/guides/tools/proc_info.rst | 2 +- doc/guides/tools/testbbdev.rst | 38 +- doc/guides/tools/testeventdev.rst | 21 +- doc/guides/vdpadevs/ifc.rst | 13 - doc/guides/vdpadevs/mlx5.rst | 40 +- 148 files changed, 688 insertions(+), 2076 deletions(-)
Signature · 1 line
2.22.0
PATCH v6 1/14 doc: remove references to make from platforms guides
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
--- doc/guides/platform/bluefield.rst | 22 --------------------- doc/guides/platform/octeontx.rst | 33 +------------------------------ doc/guides/platform/octeontx2.rst | 32 ------------------------------ 3 files changed, 1 insertion(+), 86 deletions(-)
doc/guides/platform/bluefield.rst +0 -22
@@ -60,17 +60,6 @@ Native Compilation Refer to :doc:`../nics/mlx5` for prerequisites. Either Mellanox OFED/EN or rdma-core library with corresponding kernel drivers is required. -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-bluefield-linux-gcc - make -j - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build
@@ -126,17 +115,6 @@ Then, untar the tarball at the cross toolchain directory on the x86 host. cd $(dirname $(which aarch64-linux-gnu-gcc))/.. tar xf aarch64-linux-gnu-mlx.tar -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-bluefield-linux-gcc - make -j CROSS=aarch64-linux-gnu- CONFIG_RTE_KNI_KMOD=n CONFIG_RTE_EAL_IGB_UIO=n - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build --cross-file config/arm/arm64_bluefield_linux_gcc
doc/guides/platform/octeontx.rst +1 -32
@@ -90,23 +90,8 @@ native architecture, the linux sources need to be compiled once natively. The above steps would rebuild the modules and the required intermediate binaries. Once the target is ready for native compilation, the OCTEON TX platform -drivers can be compiled with the following steps, +drivers can be compiled, see :doc:`../linux_gsg/build_dpdk` for details. -.. code-block:: console - - cd <dpdk directory> - make config T=arm64-thunderx-linux-gcc - make - -The example applications can be compiled using the following: - -.. code-block:: console - - cd <dpdk directory> - export RTE_SDK=$PWD - export RTE_TARGET=build - cd examples/<application> - make Cross Compilation ~~~~~~~~~~~~~~~~~
@@ -139,23 +124,7 @@ SDK 6.2.0 patch 3: The above steps will prepare build system with numa additions. Now this build system can be used to build applications for **OCTEON TX** :sup:`®` platforms. -.. code-block:: console - - cd <dpdk directory> - export RTE_SDK=$PWD - export RTE_KERNELDIR=$THUNDER_ROOT/linux/kernel/linux - make config T=arm64-thunderx-linux-gcc - make -j CROSS=aarch64-thunderx-linux-gnu- CONFIG_RTE_KNI_KMOD=n CONFIG_RTE_EAL_IGB_UIO=n EXTRA_CFLAGS="-isystem <numa_install_dir>/include" EXTRA_LDFLAGS="-L<numa_install_dir>/lib -lnuma" - If NUMA support is not required, it can be disabled as explained in :doc:`../linux_gsg/cross_build_dpdk_for_arm64`. -Following steps could be used in that case. - -.. code-block:: console - - make config T=arm64-thunderx-linux-gcc - make CROSS=aarch64-thunderx-linux-gnu- - - SDK and related information can be obtained from: `Cavium support site <https://support.cavium.com/>`_.
doc/guides/platform/octeontx2.rst +0 -32
@@ -498,27 +498,6 @@ an x86 based platform. Native Compilation ~~~~~~~~~~~~~~~~~~ -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-octeontx2-linux-gcc - make -j - -The example applications can be compiled using the following: - -.. code-block:: console - - cd <dpdk directory> - export RTE_SDK=$PWD - export RTE_TARGET=build - cd examples/<application> - make -j - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build
@@ -529,17 +508,6 @@ Cross Compilation Refer to :doc:`../linux_gsg/cross_build_dpdk_for_arm64` for generic arm64 details. -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-octeontx2-linux-gcc - make -j CROSS=aarch64-marvell-linux-gnu- CONFIG_RTE_KNI_KMOD=n - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build --cross-file config/arm/arm64_octeontx2_linux_gcc
Signature · 1 line
2.22.0
Re: [dpdk-dev] [PATCH v6 01/14] doc: remove references to make from platforms guides
Quoted 2 lines · Ciara Power
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
Hi Ciara,
Thanks for updating the platform guides for octeontx and octeontx2. All looks good for octeontx2 but for octeontx platform guide can we have meson build instructions. I have prepared the following patch for the same which is not merged yet. So can you please take these changes as part of your series:
https://patches.dpdk.org/patch/72274/
Thanks
Harman
Quoted 155 lines
Signed-off-by Ciara Power <[email protected]>Reviewed-by Kevin Laatz <[email protected]>--- doc/guides/platform/bluefield.rst | 22 --------------------- doc/guides/platform/octeontx.rst | 33 +------------------------------ doc/guides/platform/octeontx2.rst | 32 ------------------------------ 3 files changed, 1 insertion(+), 86 deletions(-)doc/guides/platform/bluefield.rst +0
-22@@ -60,17 +60,6 @@ Native Compilation Refer to :doc:`../nics/mlx5` for prerequisites. Either Mellanox OFED/EN or rdma-core library with corresponding kernel drivers is required. -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-bluefield-linux-gcc - make -j - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build@@ -126,17 +115,6 @@ Then, untar the tarball at the cross toolchain directory on the x86 host. cd $(dirname $(which aarch64-linux-gnu-gcc))/.. tar xf aarch64-linux-gnu-mlx.tar -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-bluefield-linux-gcc - make -j CROSS=aarch64-linux-gnu- CONFIG_RTE_KNI_KMOD=n CONFIG_RTE_EAL_IGB_UIO=n - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build --cross-file config/arm/arm64_bluefield_linux_gccdoc/guides/platform/octeontx.rst +1
-32@@ -90,23 +90,8 @@ native architecture, the linux sources need to be compiled once natively. The above steps would rebuild the modules and the required intermediate binaries. Once the target is ready for native compilation, the OCTEON TX platform -drivers can be compiled with the following steps, +drivers can be compiled, see :doc:`../linux_gsg/build_dpdk` for details. -.. code-block:: console - - cd <dpdk directory> - make config T=arm64-thunderx-linux-gcc - make - -The example applications can be compiled using the following: - -.. code-block:: console - - cd <dpdk directory> - export RTE_SDK=$PWD - export RTE_TARGET=build - cd examples/<application> - make Cross Compilation ~~~~~~~~~~~~~~~~~@@ -139,23 +124,7 @@ SDK 6.2.0 patch 3: The above steps will prepare build system with numa additions. Now this build system can be used to build applications for **OCTEON TX** :sup:`®` platforms. -.. code-block:: console - - cd <dpdk directory> - export RTE_SDK=$PWD - export RTE_KERNELDIR=$THUNDER_ROOT/linux/kernel/linux - make config T=arm64-thunderx-linux-gcc - make -j CROSS=aarch64-thunderx-linux-gnu- CONFIG_RTE_KNI_KMOD=n CONFIG_RTE_EAL_IGB_UIO=n EXTRA_CFLAGS="-isystem <numa_install_dir>/include" EXTRA_LDFLAGS="-L<numa_install_dir>/lib -lnuma" - If NUMA support is not required, it can be disabled as explained in :doc:`../linux_gsg/cross_build_dpdk_for_arm64`. -Following steps could be used in that case. - -.. code-block:: console - - make config T=arm64-thunderx-linux-gcc - make CROSS=aarch64-thunderx-linux-gnu- - - SDK and related information can be obtained from: `Cavium support site <https://support.cavium.com/>`_.doc/guides/platform/octeontx2.rst +0
-32@@ -498,27 +498,6 @@ an x86 based platform. Native Compilation ~~~~~~~~~~~~~~~~~~ -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-octeontx2-linux-gcc - make -j - -The example applications can be compiled using the following: - -.. code-block:: console - - cd <dpdk directory> - export RTE_SDK=$PWD - export RTE_TARGET=build - cd examples/<application> - make -j - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build@@ -529,17 +508,6 @@ Cross Compilation Refer to :doc:`../linux_gsg/cross_build_dpdk_for_arm64` for generic arm64 details. -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-octeontx2-linux-gcc - make -j CROSS=aarch64-marvell-linux-gnu- CONFIG_RTE_KNI_KMOD=n - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build --cross-file config/arm/arm64_octeontx2_linux_gccSignature · 1 line
2.22.0
PATCH v6 2/14 doc: remove references to make from mempool guide
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
--- doc/guides/mempool/octeontx.rst | 28 +++------------------------- doc/guides/mempool/octeontx2.rst | 10 +--------- 2 files changed, 4 insertions(+), 34 deletions(-)
doc/guides/mempool/octeontx.rst +3 -25
@@ -30,33 +30,11 @@ Prerequisites See :doc: `../platform/octeontx.rst` for setup information. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS`` ( set to ``octeontx_fpavf``) - - Set default mempool ops to octeontx_fpavf. - -- ``CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL`` (default ``y``) - - Toggle compilation of the ``librte_mempool_octeontx`` driver. Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the OCTEON TX FPAVF MEMPOOL PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console +------------------ - cd <DPDK-source-directory> - make config T=arm64-thunderx-linux-gcc +See :doc:`../linux_gsg/build_dpdk` for more information on compiling DPDK. Initialization
@@ -70,5 +48,5 @@ Example: .. code-block:: console - ./build/app/test -c 0xf --base-virtaddr=0x100000000000 \ + ./<build_dir>/app/test/dpdk-test -c 0xf --base-virtaddr=0x100000000000 \ --mbuf-pool-ops-name="octeontx_fpavf"
doc/guides/mempool/octeontx2.rst +1 -9
@@ -29,14 +29,6 @@ Prerequisites and Compilation procedure Pre-Installation Configuration ------------------------------ -Compile time Config Options -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The following option can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL`` (default ``y``) - - Toggle compilation of the ``librte_mempool_octeontx2`` driver. Runtime Config Options ~~~~~~~~~~~~~~~~~~~~~~
@@ -97,4 +89,4 @@ Standalone mempool device Example command to run ``mempool_autotest`` test with standalone OCTEONTX2 NPA device:: - echo "mempool_autotest" | build/app/test -c 0xf0 --mbuf-pool-ops-name="octeontx2_npa" + echo "mempool_autotest" | <build_dir>/app/test/dpdk-test -c 0xf0 --mbuf-pool-ops-name="octeontx2_npa"
Signature · 1 line
2.22.0
PATCH v6 3/14 doc: remove references to make from NICs guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
---
v6: Fixed indentation of testbbdev list entry.
--- doc/guides/nics/ark.rst | 7 +--- doc/guides/nics/atlantic.rst | 4 -- doc/guides/nics/axgbe.rst | 15 -------- doc/guides/nics/bnx2x.rst | 27 ------------- doc/guides/nics/bnxt.rst | 5 +-- doc/guides/nics/build_and_test.rst | 6 ++- doc/guides/nics/cxgbe.rst | 36 +++++------------ doc/guides/nics/dpaa.rst | 27 +------------ doc/guides/nics/dpaa2.rst | 26 +------------ doc/guides/nics/ena.rst | 16 -------- doc/guides/nics/enetc.rst | 2 - doc/guides/nics/enic.rst | 9 ----- doc/guides/nics/fail_safe.rst | 20 ++-------- doc/guides/nics/features.rst | 9 ----- doc/guides/nics/fm10k.rst | 4 -- doc/guides/nics/hinic.rst | 9 ----- doc/guides/nics/hns3.rst | 10 ----- doc/guides/nics/i40e.rst | 44 ++++++--------------- doc/guides/nics/ice.rst | 25 ++---------- doc/guides/nics/igc.rst | 18 +-------- doc/guides/nics/intel_vf.rst | 13 +------ doc/guides/nics/ionic.rst | 8 ---- doc/guides/nics/ipn3ke.rst | 12 +----- doc/guides/nics/kni.rst | 4 +- doc/guides/nics/liquidio.rst | 27 ------------- doc/guides/nics/memif.rst | 10 ++--- doc/guides/nics/mlx4.rst | 55 ++------------------------ doc/guides/nics/mlx5.rst | 62 ++---------------------------- doc/guides/nics/mvneta.rst | 36 ++++------------- doc/guides/nics/mvpp2.rst | 43 ++++----------------- doc/guides/nics/nfb.rst | 19 +-------- doc/guides/nics/nfp.rst | 4 -- doc/guides/nics/null.rst | 6 +-- doc/guides/nics/octeontx.rst | 19 +-------- doc/guides/nics/octeontx2.rst | 13 +------ doc/guides/nics/pcap_ring.rst | 24 ++++++------ doc/guides/nics/qede.rst | 17 +------- doc/guides/nics/sfc_efx.rst | 15 -------- doc/guides/nics/softnic.rst | 13 +------ doc/guides/nics/szedata2.rst | 18 +-------- doc/guides/nics/thunderx.rst | 25 +----------- doc/guides/nics/vdev_netvsc.rst | 6 --- doc/guides/nics/vhost.rst | 2 +- doc/guides/nics/virtio.rst | 4 +- 44 files changed, 102 insertions(+), 672 deletions(-)
doc/guides/nics/ark.rst +1 -6
@@ -122,12 +122,7 @@ The driver supports single-port, multi-queue for both RX and TX. Configuration Information ------------------------- -**DPDK Configuration Parameters** - - The following configuration options are available for the ARK PMD: - - * **CONFIG_RTE_LIBRTE_ARK_PMD** (default y): Enables or disables inclusion - of the ARK PMD driver in the DPDK compilation. +**DPDK Configuration Parameter** * **RTE_LIBRTE_ARK_MIN_TX_PKTLEN** (default 0): Sets the minimum packet length for tx packets to the FPGA. Packets less than this
doc/guides/nics/atlantic.rst +0 -4
@@ -26,10 +26,6 @@ Experimental API features - MACSEC PMD API is considered as experimental and is subject to change/removal in next DPDK releases. -Configuration Information -^^^^^^^^^^^^^^^^^^^^^^^^^ - -- ``CONFIG_RTE_LIBRTE_ATLANTIC_PMD`` (default ``y``) Application Programming Interface ---------------------------------
doc/guides/nics/axgbe.rst +0 -15
@@ -27,21 +27,6 @@ AXGBE PMD has support for: - Jumbo Frame up to 9K -Configuration Information -------------------------- - -The following options can be modified in the ``.config`` file. Please note that -enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_AXGBE_PMD`` (default **y**) - - Toggle compilation of axgbe PMD. - -- ``CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG`` (default **n**) - - Toggle display for PMD debug related messages. - - Building DPDK -------------
doc/guides/nics/bnx2x.rst +0 -27
@@ -72,33 +72,6 @@ Prerequisites `linux-firmware git repository <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/bnx2x/bnx2x-e2-7.13.11.0.fw>`_ to get the required firmware. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``.config`` file. Please note that -enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_BNX2X_PMD`` (default **n**) - - Toggle compilation of bnx2x driver. To use bnx2x PMD set this config parameter - to 'y'. Also, in order for firmware binary to load user will need zlib devel - package installed. - -- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX`` (default **n**) - - Toggle display of transmit fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX`` (default **n**) - - Toggle display of receive fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC`` (default **n**) - - Toggle display of register reads and writes. - .. _bnx2x_driver-compilation:
doc/guides/nics/bnxt.rst +1 -4
@@ -565,9 +565,6 @@ The BNXT PMD supports a PTP client application to communicate with a PTP master clock using DPDK IEEE1588 APIs. Note that the PTP client application needs to run on PF and vector mode needs to be disabled. -For the PTP time synchronization support, the BNXT PMD must be compiled with -``CONFIG_RTE_LIBRTE_IEEE1588=y`` (this compilation flag is currently pending). - .. code-block:: console testpmd> set fwd ieee1588 // enable IEEE 1588 mode
@@ -612,7 +609,7 @@ Basic stats include: * oerrors By default, per-queue stats for 16 queues are supported. For more than 16 -queues, BNXT PMD should be compiled with ``CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS`` +queues, BNXT PMD should be compiled with ``RTE_ETHDEV_QUEUE_STAT_CNTRS`` set to the desired number of queues. Extended Stats
doc/guides/nics/build_and_test.rst +5 -1
@@ -66,6 +66,10 @@ This section demonstrates how to setup and run ``testpmd`` in Linux. #. Load ``igb_uio`` or ``vfio-pci`` driver: + Before compiling, make sure to enable kmods for the meson build:: + + meson configure -Denable_kmods=true + .. code-block:: console modprobe uio
@@ -106,7 +110,7 @@ This section demonstrates how to setup and run ``testpmd`` in Linux. .. code-block:: console - ./x86_64-native-linux-gcc/app/testpmd -l 0-3 -n 4 -- -i + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 -- -i Successful execution will show initialization messages from EAL, PMD and testpmd application. A prompt will be displayed at the end for user commands
doc/guides/nics/cxgbe.rst +10 -26
@@ -87,35 +87,19 @@ Prerequisites :ref:`linux-installation` for Linux and section :ref:`freebsd-installation` for FreeBSD. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``.config`` file. Please note that -enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_CXGBE_PMD`` (default **y**) - - Toggle compilation of librte_pmd_cxgbe driver. - - .. note:: - - This controls compilation of both CXGBE and CXGBEVF PMD. Runtime Options -~~~~~~~~~~~~~~~ +--------------- The following ``devargs`` options can be enabled at runtime. They must be passed as part of EAL arguments. For example, .. code-block:: console - testpmd -w 02:00.4,keep_ovlan=1 -- -i + dpdk-testpmd -w 02:00.4,keep_ovlan=1 -- -i Common Runtime Options -^^^^^^^^^^^^^^^^^^^^^^ +~~~~~~~~~~~~~~~~~~~~~~ - ``keep_ovlan`` (default **0**)
@@ -133,7 +117,7 @@ Common Runtime Options coalesce limit has been reached. CXGBE VF Only Runtime Options -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - ``force_link_up`` (default **0**)
@@ -142,7 +126,7 @@ CXGBE VF Only Runtime Options to send traffic to each other even when the physical link is down. CXGBE PF Only Runtime Options -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - ``filtermode`` (default **0**)
@@ -317,7 +301,7 @@ CXGBE PF Only Runtime Options .. code-block:: console - testpmd -w 02:00.4,filtermode=0x88 -- -i + dpdk-testpmd -w 02:00.4,filtermode=0x88 -- -i - ``filtermask`` (default **0**)
@@ -344,7 +328,7 @@ CXGBE PF Only Runtime Options .. code-block:: console - testpmd -w 02:00.4,filtermode=0x88,filtermask=0x80 -- -i + dpdk-testpmd -w 02:00.4,filtermode=0x88,filtermask=0x80 -- -i .. _driver-compilation:
@@ -689,7 +673,7 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system. .. code-block:: console - cp x86_64-native-freebsd-clang/kmod/contigmem.ko /boot/kernel/ + cp <build_dir>/kernel/freebsd/contigmem.ko /boot/kernel/ #. Add the following lines to /boot/loader.conf:
@@ -770,13 +754,13 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system. .. code-block:: console - kldload ./x86_64-native-freebsd-clang/kmod/nic_uio.ko + kldload <build_dir>/kernel/freebsd/nic_uio.ko #. Start testpmd with basic parameters: .. code-block:: console - ./x86_64-native-freebsd-clang/app/testpmd -l 0-3 -n 4 -w 0000:02:00.4 -- -i + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 -w 0000:02:00.4 -- -i Example output:
doc/guides/nics/dpaa.rst +1 -26
@@ -196,31 +196,6 @@ See :doc:`../platform/dpaa` for setup information Pre-Installation Configuration ------------------------------ -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``y``) - - Toggle compilation of the ``librte_bus_dpaa`` driver. - -- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``y``) - - Toggle compilation of the ``librte_pmd_dpaa`` driver. - -- ``CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER`` (default ``n``) - - Toggles display of bus configurations and enables a debugging queue - to fetch error (Rx/Tx) packets to driver. By default, packets with errors - (like wrong checksum) are dropped by the hardware. - -- ``CONFIG_RTE_LIBRTE_DPAA_HWDEBUG`` (default ``n``) - - Enables debugging of the Queue and Buffer Manager layer which interacts - with the DPAA hardware. - Environment Variables ~~~~~~~~~~~~~~~~~~~~~
@@ -265,7 +240,7 @@ for details. .. code-block:: console - ./arm64-dpaa-linux-gcc/testpmd -c 0xff -n 1 \ + ./<build_dir>/app/dpdk-testpmd -c 0xff -n 1 \ -- -i --portmask=0x3 --nb-cores=1 --no-flush-rx .....
doc/guides/nics/dpaa2.rst +1 -25
@@ -432,30 +432,6 @@ Currently supported by DPDK: Some part of fslmc bus code (mc flib - object library) routines are dual licensed (BSD & GPLv2), however they are used as BSD in DPDK in userspace. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``y``) - - Toggle compilation of the ``librte_bus_fslmc`` driver. - -- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``y``) - - Toggle compilation of the ``librte_pmd_dpaa2`` driver. - -- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``) - - Toggle display of debugging messages/logic - -- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``n``) - - Toggle to use physical address vs virtual address for hardware accelerators. Driver compilation and testing ------------------------------
@@ -473,7 +449,7 @@ for details. .. code-block:: console - ./testpmd -c 0xff -n 1 -- -i --portmask=0x3 --nb-cores=1 --no-flush-rx + ./dpdk-testpmd -c 0xff -n 1 -- -i --portmask=0x3 --nb-cores=1 --no-flush-rx ..... EAL: Registered [pci] bus.
doc/guides/nics/ena.rst +0 -16
@@ -79,22 +79,6 @@ The driver supports multi-queue for both Tx and Rx. Configuration information ------------------------- -**DPDK Configuration Parameters** - - The following configuration options are available for the ENA PMD: - - * **CONFIG_RTE_LIBRTE_ENA_PMD** (default y): Enables or disables inclusion - of the ENA PMD driver in the DPDK compilation. - - * **CONFIG_RTE_LIBRTE_ENA_DEBUG_RX** (default n): Enables or disables debug - logging of RX logic within the ENA PMD driver. - - * **CONFIG_RTE_LIBRTE_ENA_DEBUG_TX** (default n): Enables or disables debug - logging of TX logic within the ENA PMD driver. - - * **CONFIG_RTE_LIBRTE_ENA_COM_DEBUG** (default n): Enables or disables debug - logging of low level tx/rx logic in ena_com(base) within the ENA PMD driver. - **Runtime Configuration Parameters** * **large_llq_hdr** (default 0)
doc/guides/nics/enetc.rst +0 -2
@@ -113,5 +113,3 @@ Driver compilation and testing Follow instructions available in the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` to launch **testpmd** - -To compile in performance mode, please set ``CONFIG_RTE_CACHE_LINE_SIZE=64``
doc/guides/nics/enic.rst +0 -9
@@ -20,13 +20,6 @@ should be downloaded from https://core.dpdk.org/download/ Configuration information ------------------------- -- **DPDK Configuration Parameters** - - The following configuration options are available for the ENIC PMD: - - - **CONFIG_RTE_LIBRTE_ENIC_PMD** (default y): Enables or disables inclusion - of the ENIC PMD driver in the DPDK compilation. - - **vNIC Configuration Parameters** - **Number of Queues**
@@ -583,8 +576,6 @@ The value depends on the memory configuration of the application, DPDK and PMD. Typically, the limit has to be raised to higher than 2GB. e.g., 2621440 -The compilation of any unused drivers can be disabled using the -configuration file in config/ directory (e.g., config/common_linux). This would help in bringing down the time taken for building the libraries and the initialization time of the application.
doc/guides/nics/fail_safe.rst +4 -16
@@ -14,10 +14,6 @@ Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the ability to redirect operations to a secondary device when the primary has been removed from the system. -.. note:: - - The library is enabled by default. You can enable it or disable it manually - by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option. Features --------
@@ -33,14 +29,6 @@ automatically by detecting capable devices and registering the relevant handler. Check the feature matrix for the complete set of supported features. -Compilation option ------------------- - -Available options within the ``$RTE_TARGET/build/.config`` file: - -- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**) - - This option enables or disables compiling librte_pmd_failsafe. Using the Fail-safe PMD from the EAL command line -------------------------------------------------
@@ -128,7 +116,7 @@ This section shows some example of using **testpmd** with a fail-safe PMD. .. code-block:: console - $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \ + ./<build_dir>/app/dpdk-testpmd -c 0xff -n 4 \ --vdev 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)' \ -b 84:00.0 -b 00:04.0 -- -i
@@ -142,7 +130,7 @@ This section shows some example of using **testpmd** with a fail-safe PMD. .. code-block:: console - $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \ + ./<build_dir>/app/dpdk-testpmd -c 0xff -n 4 \ --vdev 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)' \ -w 81:00.0 -- -i
@@ -150,7 +138,7 @@ This section shows some example of using **testpmd** with a fail-safe PMD. .. code-block:: console - $RTE_TARGET/build/app/testpmd -c 0xff -n 4 -w ff:ff.f \ + ./<build_dir>/app/dpdk-testpmd -c 0xff -n 4 -w ff:ff.f \ --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i #. Start testpmd, automatically probing the device 84:00.0 and using it with
@@ -158,7 +146,7 @@ This section shows some example of using **testpmd** with a fail-safe PMD. .. code-block:: console - $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \ + ./<build_dir>/app/dpdk-testpmd -c 0xff -n 4 \ --vdev 'net_failsafe0,dev(0000:84:00.0),dev(net_ring0)' -- -i
doc/guides/nics/features.rst +0 -9
@@ -812,8 +812,6 @@ ARMv7 Support armv7 architecture. -Use ``defconfig_arm-armv7a-*-*``. - .. _nic_features_armv8:
@@ -822,8 +820,6 @@ ARMv8 Support armv8a (64bit) architecture. -Use ``defconfig_arm64-armv8a-*-*`` - .. _nic_features_power8:
@@ -832,7 +828,6 @@ Power8 Support PowerPC architecture. -Use ``defconfig_ppc_64-power8-*-*`` .. _nic_features_x86-32:
@@ -841,8 +836,6 @@ x86-32 Support 32bits x86 architecture. -Use ``defconfig_x86_x32-native-*-*`` and ``defconfig_i686-native-*-*``. - .. _nic_features_x86-64:
@@ -851,8 +844,6 @@ x86-64 Support 64bits x86 architecture. -Use ``defconfig_x86_64-native-*-*``. - .. _nic_features_usage_doc:
doc/guides/nics/fm10k.rst +0 -4
@@ -35,10 +35,6 @@ There is no change to the PMD API. The RX/TX handlers are the only two entries f vPMD packet I/O. They are transparently registered at runtime RX/TX execution if all required conditions are met. -1. To date, only an SSE version of FM10K vPMD is available. - To ensure that vPMD is in the binary code, set - ``CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y`` in the configure file. - Some constraints apply as pre-conditions for specific optimizations on bulk packet transfers. The following sections explain RX and TX constraints in the vPMD.
doc/guides/nics/hinic.rst +0 -9
@@ -46,15 +46,6 @@ Prerequisites - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_HINIC_PMD`` (default ``y``) Driver compilation and testing ------------------------------
doc/guides/nics/hns3.rst +0 -10
@@ -44,16 +44,6 @@ Prerequisites - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_HNS3_PMD`` (default ``y``) Driver compilation and testing ------------------------------
doc/guides/nics/i40e.rst +12 -32
84 lines not on this page · raw message
doc/guides/nics/ice.rst +4 -21
@@ -20,23 +20,6 @@ Prerequisites Pre-Installation Configuration ------------------------------ -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_ICE_PMD`` (default ``y``) - - Toggle compilation of the ``librte_pmd_ice`` driver. - -- ``CONFIG_RTE_LIBRTE_ICE_DEBUG_*`` (default ``n``) - - Toggle display of generic debugging messages. - -- ``CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC`` (default ``n``) - - Toggle to use a 16-byte RX descriptor, by default the RX descriptor is 32 byte. Runtime Config Options ~~~~~~~~~~~~~~~~~~~~~~
@@ -91,14 +74,14 @@ Runtime Config Options .. code-block:: console - testpmd -w 18:00.0,proto_xtr='[(1,2-3,8-9):tcp,10-13:vlan]' + dpdk-testpmd -w 18:00.0,proto_xtr='[(1,2-3,8-9):tcp,10-13:vlan]' This setting means queues 1, 2-3, 8-9 are TCP extraction, queues 10-13 are VLAN extraction, other queues run with no protocol extraction. .. code-block:: console - testpmd -w 18:00.0,proto_xtr=vlan,proto_xtr='[(1,2-3,8-9):tcp,10-23:ipv6]' + dpdk-testpmd -w 18:00.0,proto_xtr=vlan,proto_xtr='[(1,2-3,8-9):tcp,10-23:ipv6]' This setting means queues 1, 2-3, 8-9 are TCP extraction, queues 10-23 are IPv6 extraction, other queues use the default VLAN extraction.
@@ -250,7 +233,7 @@ responses for the same from PF. #. Bind the VF0, and run testpmd with 'cap=dcf' devarg:: - testpmd -l 22-25 -n 4 -w 18:01.0,cap=dcf -- -i + dpdk-testpmd -l 22-25 -n 4 -w 18:01.0,cap=dcf -- -i #. Monitor the VF2 interface network traffic::
@@ -279,7 +262,7 @@ To start ``testpmd``, and add vlan 10 to port 0: .. code-block:: console - ./app/testpmd -l 0-15 -n 4 -- -i + ./app/dpdk-testpmd -l 0-15 -n 4 -- -i ... testpmd> rx_vlan add 10 0
doc/guides/nics/igc.rst +2 -16
@@ -11,20 +11,6 @@ I225 Series Network Adapters. `https://ark.intel.com/content/www/us/en/ark/products/series/184686/ intel-ethernet-controller-i225-series.html` -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_IGC_PMD`` (default ``y``) - - Toggle compilation of the ``librte_pmd_igc`` driver. - -- ``CONFIG_RTE_LIBRTE_IGC_DEBUG_*`` (default ``n``) - - Toggle display of generic debugging messages. - Driver compilation and testing ------------------------------
@@ -67,7 +53,7 @@ outer VLAN to 0x9100: .. code-block:: console - ./app/testpmd -l 4-8 -- -i + ./app/dpdk-testpmd -l 4-8 -- -i ... testpmd> vlan set filter on 0
@@ -94,7 +80,7 @@ Start ``testpmd``: .. code-block:: console - ./testpmd -l 4-8 -- i --rxq=4 --txq=4 --pkt-filter-mode=perfect --disable-rss + ./dpdk-testpmd -l 4-8 -- i --rxq=4 --txq=4 --pkt-filter-mode=perfect --disable-rss Add a rule to direct packet whose ``ether-type=0x801`` to queue 1:
doc/guides/nics/intel_vf.rst +2 -11
@@ -124,7 +124,6 @@ Intel® X710/XL710 Gigabit Ethernet Controller VF Infrastructure In a virtualized environment, the programmer can enable a maximum of *128 Virtual Functions (VF)* globally per Intel® X710/XL710 Gigabit Ethernet Controller NIC device. -The number of queue pairs of each VF can be configured by ``CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF`` in ``config`` file. The Physical Function in host could be either configured by the Linux* i40e driver (in the case of the Linux Kernel-based Virtual Machine [KVM]) or by DPDK PMD PF driver. When using both DPDK PMD PF/VF drivers, the whole NIC will be taken over by DPDK based application.
@@ -521,20 +520,12 @@ The setup procedure is as follows: .. code-block:: console - make install T=x86_64-native-linux-gcc - ./x86_64-native-linux-gcc/app/testpmd -l 0-3 -n 4 -- -i + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 -- -i #. Finally, access the Guest OS using vncviewer with the localhost:5900 port and check the lspci command output in the Guest OS. The virtual functions will be listed as available for use. -#. Configure and install the DPDK with an x86_64-native-linux-gcc configuration on the Guest OS as normal, - that is, there is no change to the normal installation procedure. - - .. code-block:: console - - make config T=x86_64-native-linux-gcc O=x86_64-native-linux-gcc - cd x86_64-native-linux-gcc - make +#. Configure and install the DPDK on the Guest OS as normal, that is, there is no change to the normal installation procedure. .. note::
doc/guides/nics/ionic.rst +0 -8
@@ -24,14 +24,6 @@ on the host, check for the PCI devices: b5:00.0 Ethernet controller: Device 1dd8:1002 b6:00.0 Ethernet controller: Device 1dd8:1002 -Pre-Installation Configuration ------------------------------- - -The following options can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_IONIC_PMD`` (default ``y``) - - Toggle compilation of ionic PMD. Building DPDK -------------
doc/guides/nics/ipn3ke.rst +2 -10
@@ -31,14 +31,6 @@ Prerequisites Pre-Installation Configuration ------------------------------ -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_IPN3KE_PMD`` (default ``y``) - - Toggle compilation of the ``librte_pmd_ipn3ke`` driver. Runtime Config Options ~~~~~~~~~~~~~~~~~~~~~~
@@ -85,7 +77,7 @@ To start ``testpmd``, and add I40e PF to FPGA network port: .. code-block:: console - ./app/testpmd -l 0-15 -n 4 --vdev 'ifpga_rawdev_cfg0,ifpga=b3:00.0,port=0' --vdev 'ipn3ke_cfg0,afu=0|b3:00.0,i40e_pf={0000:b1:00.0|0000:b1:00.1|0000:b1:00.2|0000:b1:00.3|0000:b5:00.0|0000:b5:00.1|0000:b5:00.2|0000:b5:00.3}' -- -i --no-numa --port-topology=loop + ./<build_dir>/app/dpdk-testpmd -l 0-15 -n 4 --vdev 'ifpga_rawdev_cfg0,ifpga=b3:00.0,port=0' --vdev 'ipn3ke_cfg0,afu=0|b3:00.0,i40e_pf={0000:b1:00.0|0000:b1:00.1|0000:b1:00.2|0000:b1:00.3|0000:b5:00.0|0000:b5:00.1|0000:b5:00.2|0000:b5:00.3}' -- -i --no-numa --port-topology=loop HQoS and flow acceleration ~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -96,7 +88,7 @@ To start ``testpmd``, and add I40e PF to FPGA network port, enable FPGA HQoS and .. code-block:: console - ./app/testpmd -l 0-15 -n 4 --vdev 'ifpga_rawdev_cfg0,ifpga=b3:00.0,port=0' --vdev 'ipn3ke_cfg0,afu=0|b3:00.0,fpga_acc={tm|flow},i40e_pf={0000:b1:00.0|0000:b1:00.1|0000:b1:00.2|0000:b1:00.3|0000:b5:00.0|0000:b5:00.1|0000:b5:00.2|0000:b5:00.3}' -- -i --no-numa --forward-mode=macswap + ./<build_dir>/app/dpdk-testpmd -l 0-15 -n 4 --vdev 'ifpga_rawdev_cfg0,ifpga=b3:00.0,port=0' --vdev 'ipn3ke_cfg0,afu=0|b3:00.0,fpga_acc={tm|flow},i40e_pf={0000:b1:00.0|0000:b1:00.1|0000:b1:00.2|0000:b1:00.3|0000:b5:00.0|0000:b5:00.1|0000:b5:00.2|0000:b5:00.3}' -- -i --no-numa --forward-mode=macswap Limitations or Known issues ---------------------------
doc/guides/nics/kni.rst +2 -2
@@ -97,13 +97,13 @@ It is possible to test PMD quickly using KNI kernel module loopback feature: .. code-block:: console - insmod build/kmod/rte_kni.ko lo_mode=lo_mode_fifo_skb + insmod <build_dir>/kernel/linux/kni/rte_kni.ko lo_mode=lo_mode_fifo_skb * Start testpmd with no physical device but two KNI virtual devices: .. code-block:: console - ./testpmd --vdev net_kni0 --vdev net_kni1 -- -i + ./dpdk-testpmd --vdev net_kni0 --vdev net_kni1 -- -i .. code-block:: console
doc/guides/nics/liquidio.rst +0 -27
@@ -20,33 +20,6 @@ Supported LiquidIO Adapters - LiquidIO II CN2360 210SVPT -Pre-Installation Configuration ------------------------------- - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_LIO_PMD`` (default ``y``) - - Toggle compilation of LiquidIO PMD. - -- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_RX`` (default ``n``) - - Toggle display of receive fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_TX`` (default ``n``) - - Toggle display of transmit fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX`` (default ``n``) - - Toggle display of mailbox messages. - -- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS`` (default ``n``) - - Toggle display of register reads and writes. - - SR-IOV: Prerequisites and Sample Application Notes --------------------------------------------------
doc/guides/nics/memif.rst +5 -5
@@ -213,15 +213,15 @@ In this example we run two instances of testpmd application and transmit packets First create ``master`` interface:: - #./build/app/testpmd -l 0-1 --proc-type=primary --file-prefix=pmd1 --vdev=net_memif,role=master -- -i + #./<build_dir>/app/dpdk-testpmd -l 0-1 --proc-type=primary --file-prefix=pmd1 --vdev=net_memif,role=master -- -i Now create ``slave`` interface (master must be already running so the slave will connect):: - #./build/app/testpmd -l 2-3 --proc-type=primary --file-prefix=pmd2 --vdev=net_memif -- -i + #./<build_dir>/app/dpdk-testpmd -l 2-3 --proc-type=primary --file-prefix=pmd2 --vdev=net_memif -- -i You can also enable ``zero-copy`` on ``slave`` interface:: - #./build/app/testpmd -l 2-3 --proc-type=primary --file-prefix=pmd2 --vdev=net_memif,zero-copy=yes --single-file-segments -- -i + #./<build_dir>/app/dpdk-testpmd -l 2-3 --proc-type=primary --file-prefix=pmd2 --vdev=net_memif,zero-copy=yes --single-file-segments -- -i Start forwarding packets::
@@ -257,7 +257,7 @@ To see socket filename use show memif command:: Now create memif interface by running testpmd with these command line options:: - #./testpmd --vdev=net_memif,socket=/run/vpp/memif.sock -- -i + #./dpdk-testpmd --vdev=net_memif,socket=/run/vpp/memif.sock -- -i Testpmd should now create memif slave interface and try to connect to master. In testpmd set forward option to icmpecho and start forwarding::
@@ -280,7 +280,7 @@ The situation is analogous to cross connecting 2 ports of the NIC by cable. To set the loopback, just use the same socket and id with different roles:: - #./testpmd --vdev=net_memif0,role=master,id=0 --vdev=net_memif1,role=slave,id=0 -- -i + #./dpdk-testpmd --vdev=net_memif0,role=master,id=0 --vdev=net_memif1,role=slave,id=0 -- -i Then start the communication::
doc/guides/nics/mlx4.rst +3 -52
79 lines not on this page · raw message
doc/guides/nics/mlx5.rst +3 -59
86 lines not on this page · raw message
doc/guides/nics/mvneta.rst +8 -28
@@ -13,12 +13,6 @@ Detailed information about SoCs that use PPv2 can be obtained here: * https://www.marvell.com/embedded-processors/armada-3700/ -.. Note:: - - Due to external dependencies, this driver is disabled by default. It must - be enabled manually by setting relevant configuration option manually. - Please refer to `Config File Options`_ section for further details. - Features --------
@@ -81,20 +75,9 @@ Prerequisites Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup DPDK environment. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_MVNETA_PMD`` (default ``n``) - - Toggle compilation of the librte_pmd_mvneta driver. Runtime options -~~~~~~~~~~~~~~~ +--------------- The following ``devargs`` options can be enabled at runtime. They must be passed as part of EAL arguments.
@@ -107,7 +90,7 @@ be passed as part of EAL arguments. .. code-block:: console - ./testpmd --vdev=net_mvneta,iface=eth0,iface=eth1 \ + ./dpdk-testpmd --vdev=net_mvneta,iface=eth0,iface=eth1 \ -c 3 -- -i --p 3 -a
@@ -126,16 +109,13 @@ Driver needs precompiled MUSDK library during compilation. MUSDK will be installed to `usr/local` under current directory. For the detailed build instructions please consult ``doc/musdk_get_started.txt``. -Before the DPDK build process the environmental variable ``LIBMUSDK_PATH`` with -the path to the MUSDK installation directory needs to be exported. +The path to the MUSDK installation directory needs to set in meson, shown in the +following command: .. code-block:: console - export LIBMUSDK_PATH=<musdk>/usr/local - export CROSS=aarch64-linux-gnu- - make config T=arm64-armv8a-linux-gcc - sed -ri 's,(MVNETA_PMD=)n,\1y,' build/.config - make + meson -Dlib_musdk_dir=/path/to/musdk build ninja -C build + Usage Example -------------
@@ -160,7 +140,7 @@ In order to run testpmd example application following command can be used: .. code-block:: console - ./testpmd --vdev=net_mvneta,iface=eth0,iface=eth1 -c 3 -- \ + ./dpdk-testpmd --vdev=net_mvneta,iface=eth0,iface=eth1 -c 3 -- \ -i --p 3 -a --txd 256 --rxd 128 --rxq=1 --txq=1 --nb-cores=1
@@ -168,4 +148,4 @@ In order to run l2fwd example application following command can be used: .. code-block:: console - ./l2fwd --vdev=net_mvneta,iface=eth0,iface=eth1 -c 3 -- -T 1 -p 3 + ./dpdk-l2fwd --vdev=net_mvneta,iface=eth0,iface=eth1 -c 3 -- -T 1 -p 3
doc/guides/nics/mvpp2.rst +8 -35
97 lines not on this page · raw message
doc/guides/nics/nfb.rst +2 -17
@@ -16,13 +16,6 @@ and used technology (`Netcope Development Kit <http://www.netcope.com/en/products/fpga-development-kit>`_) can be found on the `Netcope Technologies website <http://www.netcope.com/>`_. -.. note:: - - This driver has external dependencies. - Therefore it is disabled in default configuration files. - It can be enabled by setting ``CONFIG_RTE_LIBRTE_NFB_PMD=y`` - and recompiling. - .. note:: Currently the driver is supported only on x86_64 architectures.
@@ -62,14 +55,6 @@ The minimum version of the provided packages: Configuration ------------- -These configuration options can be modified before compilation in the -``.config`` file: - -* ``CONFIG_RTE_LIBRTE_NFB_PMD`` default value: **n** - - Value **y** enables compilation of nfb PMD. - - Timestamps The PMD supports hardware timestamps of frame receipt on physical network interface. In order to use
@@ -78,7 +63,7 @@ products) and the device argument `timestamp=1` must be used. .. code-block:: console - $RTE_TARGET/app/testpmd -w b3:00.0,timestamp=1 <other EAL params> -- <testpmd params> + ./<build_dir>/app/dpdk-testpmd -w b3:00.0,timestamp=1 <other EAL params> -- <testpmd params> When the timestamps are enabled with the *devarg*, a timestamp validity flag is set in the MBUFs containing received frames and timestamp is inserted into the `rte_mbuf` struct.
@@ -133,7 +118,7 @@ transmit queue: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 2 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 2 \ -- --port-topology=chained --rxq=2 --txq=2 --nb-cores=2 -i -a Example output:
doc/guides/nics/nfp.rst +0 -4
@@ -49,10 +49,6 @@ compile it along with other DPDK PMDs even if no BSP was installed previously. Of course, a DPDK app will require such a BSP installed for using the NFP PMD, along with a specific NFP firmware application. -Default PMD configuration is at the **common_linux configuration** file: - -- **CONFIG_RTE_LIBRTE_NFP_PMD=y** - Once the DPDK is built all the DPDK apps and examples include support for the NFP PMD.
doc/guides/nics/null.rst +3 -3
@@ -14,7 +14,7 @@ Usage .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev net_null0 --vdev net_null1 -- -i + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 --vdev net_null0 --vdev net_null1 -- -i Runtime Config Options
@@ -26,7 +26,7 @@ Runtime Config Options .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev "net_null0,copy=1" -- -i + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 --vdev "net_null0,copy=1" -- -i - ``size`` [optional, default=64 bytes]
@@ -35,7 +35,7 @@ Runtime Config Options .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev "net_null0,size=256" -- -i + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 --vdev "net_null0,size=256" -- -i - ``no-rx`` [optional, default disabled]
doc/guides/nics/octeontx.rst +1 -18
@@ -52,15 +52,6 @@ See :doc:`../platform/octeontx` for setup information. Pre-Installation Configuration ------------------------------ -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_OCTEONTX_PMD`` (default ``y``) - - Toggle compilation of the ``librte_pmd_octeontx`` driver. Driver compilation and testing ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -68,14 +59,6 @@ Driver compilation and testing Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` for details. -To compile the OCTEON TX PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-thunderx-linux-gcc install - #. Running testpmd: Follow instructions available in the document
@@ -86,7 +69,7 @@ following ``make`` command: .. code-block:: console - ./arm64-thunderx-linux-gcc/app/testpmd -c 700 \ + ./<build_dir>/app/dpdk-testpmd -c 700 \ --base-virtaddr=0x100000000000 \ --mbuf-pool-ops-name="octeontx_fpavf" \ --vdev='event_octeontx' \
doc/guides/nics/octeontx2.rst +1 -12
@@ -46,14 +46,6 @@ Prerequisites See :doc:`../platform/octeontx2` for setup information. -Compile time Config Options ---------------------------- - -The following options may be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_OCTEONTX2_PMD`` (default ``y``) - - Toggle compilation of the ``librte_pmd_octeontx2`` driver. Driver compilation and testing ------------------------------
@@ -61,9 +53,6 @@ Driver compilation and testing Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` for details. -To compile the OCTEON TX2 PMD for Linux arm64 gcc, -use arm64-octeontx2-linux-gcc as target. - #. Running testpmd: Follow instructions available in the document
@@ -74,7 +63,7 @@ use arm64-octeontx2-linux-gcc as target. .. code-block:: console - ./build/app/testpmd -c 0x300 -w 0002:02:00.0 -- --portmask=0x1 --nb-cores=1 --port-topology=loop --rxq=1 --txq=1 + ./<build_dir>/app/dpdk-testpmd -c 0x300 -w 0002:02:00.0 -- --portmask=0x1 --nb-cores=1 --port-topology=loop --rxq=1 --txq=1 EAL: Detected 24 lcore(s) EAL: Detected 1 NUMA nodes EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
doc/guides/nics/pcap_ring.rst +11 -13
@@ -15,10 +15,8 @@ the DPDK also includes pure-software PMDs, two of these drivers are: .. note:: - The libpcap -based PMD is disabled by default in the build configuration files, - owing to an external dependency on the libpcap development files which must be installed on the board. - Once the libpcap development files are installed, - the library can be enabled by setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK. + The libpcap -based PMD has an external dependency on the libpcap development files which must + be installed on the board. Using the Drivers from the EAL Command Line -------------------------------------------
@@ -42,7 +40,7 @@ Device name and stream options must be separated by commas as shown below: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 \ --vdev 'net_pcap0,stream_opt0=..,stream_opt1=..' \ --vdev='net_pcap1,stream_opt0=..'
@@ -141,7 +139,7 @@ Read packets from one pcap file and write them to another: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 \ --vdev 'net_pcap0,rx_pcap=file_rx.pcap,tx_pcap=file_tx.pcap' \ -- --port-topology=chained
@@ -149,7 +147,7 @@ Read packets from a network interface and write them to a pcap file: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 \ --vdev 'net_pcap0,rx_iface=eth0,tx_pcap=file_tx.pcap' \ -- --port-topology=chained
@@ -157,7 +155,7 @@ Read packets from a pcap file and write them to a network interface: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 \ --vdev 'net_pcap0,rx_pcap=file_rx.pcap,tx_iface=eth1' \ -- --port-topology=chained
@@ -165,14 +163,14 @@ Forward packets through two network interfaces: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 \ --vdev 'net_pcap0,iface=eth0' --vdev='net_pcap1;iface=eth1' Enable 2 tx queues on a network interface: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 \ --vdev 'net_pcap0,rx_iface=eth1,tx_iface=eth1,tx_iface=eth1' \ -- --txq 2
@@ -180,7 +178,7 @@ Read only incoming packets from a network interface and write them back to the s .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 \ --vdev 'net_pcap0,rx_iface_in=eth1,tx_iface=eth1' Using libpcap-based PMD with the testpmd Application
@@ -205,7 +203,7 @@ Otherwise, the first 512 packets from the input pcap file will be discarded by t .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 \ --vdev 'net_pcap0,rx_pcap=file_rx.pcap,tx_pcap=file_tx.pcap' \ -- --port-topology=chained --no-flush-rx
@@ -225,7 +223,7 @@ Multiple devices may be specified, separated by commas. .. code-block:: console - ./testpmd -l 1-3 -n 4 --vdev=net_ring0 --vdev=net_ring1 -- -i + ./dpdk-testpmd -l 1-3 -n 4 --vdev=net_ring0 --vdev=net_ring1 -- -i EAL: Detected lcore 1 as core 1 on socket 0 ...
doc/guides/nics/qede.rst +2 -15
@@ -106,22 +106,9 @@ Performance note Config File Options ~~~~~~~~~~~~~~~~~~~ -The following options can be modified in the ``.config`` file. Please note that -enabling debugging options may affect system performance. +The following option can be modified in the ``config/rte_config.h`` file. -- ``CONFIG_RTE_LIBRTE_QEDE_PMD`` (default **y**) - - Toggle compilation of QEDE PMD driver. - -- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX`` (default **n**) - - Toggle display of transmit fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX`` (default **n**) - - Toggle display of receive fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**) +- ``RTE_LIBRTE_QEDE_FW`` (default **""**) Gives absolute path of firmware file. ``Eg: "/lib/firmware/qed/qed_init_values-8.40.33.0.bin"``
doc/guides/nics/sfc_efx.rst +0 -15
@@ -273,21 +273,6 @@ Pre-Installation Configuration ------------------------------ -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``.config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_SFC_EFX_PMD`` (default **y**) - - Enable compilation of Solarflare libefx-based poll-mode driver. - -- ``CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG`` (default **n**) - - Enable compilation of the extra run-time consistency checks. - - Per-Device Parameters ~~~~~~~~~~~~~~~~~~~~~
doc/guides/nics/softnic.rst +2 -11
@@ -51,15 +51,6 @@ Any Linux distribution fulfilling the conditions described in ``System Requireme section of :ref:`the DPDK documentation <linux_gsg>` or refer to *DPDK Release Notes*. -Build options -------------- - -The default PMD configuration available in the common_linux configuration file: - -CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y - -Once the DPDK is built, all the DPDK applications include support for the -Soft NIC PMD. Soft NIC PMD arguments ----------------------
@@ -130,7 +121,7 @@ Soft NIC testing .. code-block:: console - ./testpmd -c 0x7 -s 0x4 --vdev 'net_softnic0,firmware=<script path>/firmware.cli,cpu_id=0,conn_port=8086' -- -i + ./dpdk-testpmd -c 0x7 -s 0x4 --vdev 'net_softnic0,firmware=<script path>/firmware.cli,cpu_id=0,conn_port=8086' -- -i --portmask=0x2 .. code-block:: console
@@ -375,7 +366,7 @@ commands. .. code-block:: console - ./x86_64-native-linux-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 \ + ./<build_dir>/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 \ --vdev 'net_softnic0, \ firmware=./drivers/net/softnic/ \ firmware.cli, \
doc/guides/nics/szedata2.rst +1 -17
@@ -15,13 +15,6 @@ and used technology (`Netcope Development Kit <http://www.netcope.com/en/products/fpga-development-kit>`_) can be found on the `Netcope Technologies website <http://www.netcope.com/>`_. -.. note:: - - This driver has external dependencies. - Therefore it is disabled in default configuration files. - It can be enabled by setting ``CONFIG_RTE_LIBRTE_PMD_SZEDATA2=y`` - and recompiling. - .. note:: Currently the driver is supported only on x86_64 architectures.
@@ -63,15 +56,6 @@ The minimum version of the provided packages: * for DPDK up to 18.02 (including): **3.0.5** -Configuration -------------- - -These configuration options can be modified before compilation in the -``.config`` file: - -* ``CONFIG_RTE_LIBRTE_PMD_SZEDATA2`` default value: **n** - - Value **y** enables compilation of szedata2 PMD. Using the SZEDATA2 PMD ----------------------
@@ -129,7 +113,7 @@ transmit channel: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 2 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 2 \ -- --port-topology=chained --rxq=2 --txq=2 --nb-cores=2 -i -a Example output:
doc/guides/nics/thunderx.rst +2 -23
@@ -43,26 +43,6 @@ Prerequisites ------------- - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD`` (default ``y``) - - Toggle compilation of the ``librte_pmd_thunderx_nicvf`` driver. - -- ``CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX`` (default ``n``) - - Toggle asserts of receive fast path. - -- ``CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX`` (default ``n``) - - Toggle asserts of transmit fast path. Driver compilation and testing ------------------------------
@@ -70,8 +50,7 @@ Driver compilation and testing Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` for details. -To compile the ThunderX NICVF PMD for Linux arm64 gcc, -use arm64-thunderx-linux-gcc as target. +Use config/arm/arm64-thunderx-linux-gcc as a meson cross-file when cross-compiling. Linux -----
@@ -178,7 +157,7 @@ This section provides instructions to configure SR-IOV with Linux OS. .. code-block:: console - ./arm64-thunderx-linux-gcc/app/testpmd -l 0-3 -n 4 -w 0002:01:00.2 \ + ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 -w 0002:01:00.2 \ -- -i --no-flush-rx \ --port-topology=loop
doc/guides/nics/vdev_netvsc.rst +0 -6
@@ -61,12 +61,6 @@ This driver implementation may be temporary and should be improved or removed either when hot-plug will be fully supported in EAL and bus drivers or when a new NetVSC driver will be integrated. -Build options -------------- - -- ``CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD`` (default ``y``) - - Toggle compilation of this driver. Run-time parameters -------------------
doc/guides/nics/vhost.rst +1 -1
@@ -90,7 +90,7 @@ This section demonstrates vhost PMD with testpmd DPDK sample application. .. code-block:: console - ./testpmd -l 0-3 -n 4 --vdev 'net_vhost0,iface=/tmp/sock0,queues=1' -- -i + ./dpdk-testpmd -l 0-3 -n 4 --vdev 'net_vhost0,iface=/tmp/sock0,queues=1' -- -i Other basic DPDK preparations like hugepage enabling here. Please refer to the *DPDK Getting Started Guide* for detailed instructions.
doc/guides/nics/virtio.rst +2 -2
@@ -110,7 +110,7 @@ Host2VM communication example .. code-block:: console - examples/kni/build/app/kni -l 0-3 -n 4 -- -p 0x1 -P --config="(0,1,3)" + <build_dir>/examples/dpdk-kni -l 0-3 -n 4 -- -p 0x1 -P --config="(0,1,3)" This command generates one network device vEth0 for physical port. If specify more physical ports, the generated network device will be vEth1, vEth2, and so on.
@@ -340,7 +340,7 @@ Here we use l3fwd-power as an example to show how to get started. .. code-block:: console - $ l3fwd-power -l 0-1 -- -p 1 -P --config="(0,0,1)" \ + $ dpdk-l3fwd-power -l 0-1 -- -p 1 -P --config="(0,0,1)" \ --no-numa --parse-ptype
Signature · 1 line
2.22.0
Re: [dpdk-dev] [EXT] [PATCH v6 03/14] doc: remove references to make from NICs guides
Hi Ciara,
Thanks for the patch,
Quoted 7 lines
doc/guides/nics/atlantic.rst +0
-0@@ -26,10 +26,6 @@ Experimental API features - MACSEC PMD API is considered as experimental and is subject tochange/removal in next DPDK releases.
doc/guides/nics/atlantic.rst Experimental API features · line 31
Quoted 7 lines
doc/guides/nics/atlantic.rst +0
-4-Configuration Information -^^^^^^^^^^^^^^^^^^^^^^^^^ - -- ``CONFIG_RTE_LIBRTE_ATLANTIC_PMD`` (default ``y``) Application Programming Interface ---------------------------------
For atlantic,
Quoted 10 lines
doc/guides/nics/qede.rst +0
-1@@ -106,22 +106,9 @@ Performance note Config File Options ~~~~~~~~~~~~~~~~~~~ -The following options can be modified in the ``.config`` file. Please notethat
doc/guides/nics/qede.rst Performance note · line 114
Quoted 6 lines
doc/guides/nics/qede.rst +1
-4-enabling debugging options may affect system performance. +The following option can be modified in the ``config/rte_config.h`` file. -- ``CONFIG_RTE_LIBRTE_QEDE_PMD`` (default **y**) - - Toggle compilation of QEDE PMD driver.
This one is correctly removed, but the below defines,
doc/guides/nics/qede.rst Performance note · line 114
Quoted 13 lines
-- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX`` (default **n**)
doc/guides/nics/qede.rst +1
-8- - Toggle display of transmit fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX`` (default **n**) - - Toggle display of receive fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**) +- ``RTE_LIBRTE_QEDE_FW`` (default **""**) Gives absolute path of firmware file. ``Eg: "/lib/firmware/qed/qed_init_values-8.40.33.0.bin"``
These all still exist. I believe "CONFIG_" prefix should be removed here, but the defines and code behind them should stay.
Regards,
Igor
Re: [dpdk-dev] [EXT] [PATCH v6 03/14] doc: remove references to make from NICs guides
09/10/2020 14:00, Igor Russkikh:
Quoted 28 lines
Quoted 8 lines
doc/guides/nics/qede.rst +0
-1@@ -106,22 +106,9 @@ Performance note Config File Options ~~~~~~~~~~~~~~~~~~~ -The following options can be modified in the ``.config`` file. Please notethat
doc/guides/nics/qede.rst Performance note · line 114
Quoted 6 lines
doc/guides/nics/qede.rst +1
-4-enabling debugging options may affect system performance. +The following option can be modified in the ``config/rte_config.h`` file. -- ``CONFIG_RTE_LIBRTE_QEDE_PMD`` (default **y**) - - Toggle compilation of QEDE PMD driver.This one is correctly removed, but the below defines,
Quoted 11 lines
-- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX`` (default **n**)
doc/guides/nics/qede.rst +1
-8- - Toggle display of transmit fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX`` (default **n**) - - Toggle display of receive fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**) +- ``RTE_LIBRTE_QEDE_FW`` (default **""**)
Quoted 5 lines
Quoted 2 lines
Gives absolute path of firmware file.
``Eg: "/lib/firmware/qed/qed_init_values-8.40.33.0.bin"``These all still exist. I believe "
CONFIG_" prefix should be removed here, but the defines and code behind them should stay.
I believe the same comment applies to multiple drivers which have compilation options and probably should keep this information.
That's the main reason why I didn't apply these patches so far, waiting for feedbacks.
It has been decided in a maintainers meeting to apply the patches anyway, but given we have a request for qede, I think it blocks applying this v6.
Re: [dpdk-dev] [EXT] [PATCH v6 03/14] doc: remove references to make from NICs guides
Quoted 37 lines
From: Thomas Monjalon <[email protected]>
Sent: Sunday, October 11, 2020 2:02 PM09/10/2020 14:00, Igor Russkikh:
Quoted 27 lines
doc/guides/nics/qede.rst Performance note · line 114
Quoted 13 lines
doc/guides/nics/qede.rst +0
-0@@ -106,22 +106,9 @@ Performance note Config File Options~~~~~~~~~~~~~~~~~~~
-The following options can be modified in the ``.config`` file. Please note that -enabling debugging options may affect system performance.
doc/guides/nics/qede.rst +1
-3+The following option can be modified in the ``config/rte_config.h`` file. -- ``CONFIG_RTE_LIBRTE_QEDE_PMD`` (default **y**) - - Toggle compilation of QEDE PMD driver.This one is correctly removed, but the below defines,
Quoted 11 lines
-- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX`` (default **n**)
doc/guides/nics/qede.rst +1
-8- - Toggle display of transmit fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX`` (default **n**) - - Toggle display of receive fast path run-time messages. - -- ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**) +- ``RTE_LIBRTE_QEDE_FW`` (default **""**)Quoted 5 lines
Quoted 2 lines
Gives absolute path of firmware file.
``Eg: "/lib/firmware/qed/qed_init_values-8.40.33.0.bin"``These all still exist. I believe "
CONFIG_" prefix should be removed here, but the defines and code behind them should stay.
Quoted 8 lines
I believe the same comment applies to multiple drivers which have compilation options and probably should keep this information.
That's the main reason why I didn't apply these patches so far, waiting for feedbacks.
It has been decided in a maintainers meeting to apply the patches anyway, but given we have a request for qede, I think it blocks applying this v6.
Thanks for the patch Ciara, besides 'qede' PMD we also need similar config preserved for 'bnx2x' PMD.
Remove "CONFIG_" prefix and retain following:RTE_LIBRTE_BNX2X_DEBUG_RXRTE_LIBRTE_BNX2X_DEBUG_TXRTE_LIBRTE_BNX2X_DEBUG_PERIODIC
Re: [dpdk-dev] [PATCH v6 03/14] doc: remove references to make from NICs guides
In reply to Ciara PowerQuoted 8 lines · Ciara Power
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
Signed-off-by Ciara Power <[email protected]>Reviewed-by Bruce Richardson <[email protected]>---
v6: Fixed indentation of testbbdev list entry.
for kni, pcap & null,
Ajit Khaparde
Acked-byRe: [dpdk-dev] [PATCH v6 03/14] doc: remove references to make from NICs guides
Quoted 5 lines · Ferruh Yigit
Quoted 3 lines · Ciara Power
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
Quoted 8 lines
Quoted 5 lines
Signed-off-by Ciara Power <[email protected]>Reviewed-by Bruce Richardson <[email protected]>---
v6: Fixed indentation of testbbdev list entry.for kni, pcap & null,
Reviewed-by Ferruh Yigit <[email protected]>
For bnxt
Quoted 2 lines
Re: [dpdk-dev] [PATCH v6 03/14] doc: remove references to make from NICs guides
In reply to Ciara PowerQuoted 4 lines
-----Original Message-----
From: Ciara Power <[email protected]>
Sent: Friday, October 9, 2020 7:21 PM
To: [email protected]
[...]
Quoted 4 lines
Subject: [PATCH v6 03/14] doc: remove references to make from NICs guides
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
[...]
Quoted 1 line
doc/guides/nics/enic.rst | 9 -----
[...]
Quoted 37 lines
doc/guides/nics/enetc.rst +0
-2@@ -113,5 +113,3 @@ Driver compilation and testing Follow instructions available in the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` to launch **testpmd** - -To compile in performance mode, please set``CONFIG_RTE_CACHE_LINE_SIZE=64``
doc/guides/nics/enic.rst +0
-0@@ -20,13 +20,6 @@ should be downloaded fromhttps://core.dpdk.org/download/
Configuration information
--------------------------- **DPDK Configuration Parameters**
doc/guides/nics/enic.rst +0
-4- - The following configuration options are available for the ENIC PMD: - - - **CONFIG_RTE_LIBRTE_ENIC_PMD** (default y): Enables or disablesinclusion
doc/guides/nics/enic.rst +0
-2- of the ENIC PMD driver in the DPDK compilation. - - **vNIC Configuration Parameters** - **Number of Queues**@@ -583,8 +576,6 @@ The value depends on the memory configuration ofthe application, DPDK and
PMD. Typically, the limit has to be raised to higher than 2GB. e.g., 2621440
doc/guides/nics/enic.rst The value depends on the memory configuration of the application, DPDK and · line 580
Quoted 4 lines
doc/guides/nics/enic.rst +0
-2-The compilation of any unused drivers can be disabled using the -configuration file in config/ directory (e.g., config/common_linux). This would help in bringing down the time taken for building the libraries and the initialization time of the application.
Hi,
Could you remove the remaining two lines as well ("This would ... application.")?
For enic,
Thanks.
-Hyong
Re: [dpdk-dev] [EXT] [PATCH v6 03/14] doc: remove references to make from NICs guides
In reply to Ciara PowerQuoted 11 lines · Ciara Power
External Email
----------------------------------------------------------------------
Make is no longer supported for compiling DPDK, references are now removed in the documentation.Signed-off-by Ciara Power <[email protected]>Reviewed-by Bruce Richardson <[email protected]>---
v6: Fixed indentation of testbbdev list entry.
Hi Ciara,
Thanks for updating the nic documentation for octeontx and octeontx2.
Thanks
Harman
PATCH v6 4/14 doc: remove references to make from vdpadevs guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
--- doc/guides/vdpadevs/ifc.rst | 13 ------------ doc/guides/vdpadevs/mlx5.rst | 40 +++--------------------------------- 2 files changed, 3 insertions(+), 50 deletions(-)
doc/guides/vdpadevs/ifc.rst +0 -13
@@ -11,19 +11,6 @@ directly by DMA. Besides, it supports dirty page logging and device state report/restore, this driver enables its vDPA functionality. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following option can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_IFC_PMD`` (default ``y`` for linux) - - Toggle compilation of the ``librte_pmd_ifc`` driver. - - IFCVF vDPA Implementation -------------------------
doc/guides/vdpadevs/mlx5.rst +3 -37
@@ -14,9 +14,7 @@ SR-IOV context. .. note:: - Due to external dependencies, this driver is disabled in default - configuration of the "make" build. It can be enabled with - ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD=y`` or by using "meson" build system which + This driver is enabled automatically when using "meson" build system which will detect dependencies.
@@ -65,42 +63,10 @@ Prerequisites Compilation options ~~~~~~~~~~~~~~~~~~~ -These options can be modified in the ``.config`` file. - -- ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD`` (default **n**) - - Toggle compilation of librte_pmd_mlx5 itself. - -- ``CONFIG_RTE_IBVERBS_LINK_DLOPEN`` (default **n**) - - Build PMD with additional code to make it loadable without hard - dependencies on **libibverbs** nor **libmlx5**, which may not be installed - on the target system. - - In this mode, their presence is still required for it to run properly, - however their absence won't prevent a DPDK application from starting (with - ``CONFIG_RTE_BUILD_SHARED_LIB`` disabled) and they won't show up as - missing with ``ldd(1)``. - - It works by moving these dependencies to a purpose-built rdma-core "glue" - plug-in which must either be installed in a directory whose name is based - on ``CONFIG_RTE_EAL_PMD_PATH`` suffixed with ``-glue`` if set, or in a - standard location for the dynamic linker (e.g. ``/lib``) if left to the - default empty string (``""``). - - This option has no performance impact. - -- ``CONFIG_RTE_IBVERBS_LINK_STATIC`` (default **n**) - - Embed static flavor of the dependencies **libibverbs** and **libmlx5** - in the PMD shared library or the executable static binary. - .. note:: - For BlueField, target should be set to ``arm64-bluefield-linux-gcc``. This - will enable ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD`` and set - ``RTE_CACHE_LINE_SIZE`` to 64. Default armv8a configuration of make build and - meson build set it to 128 then brings performance degradation. + Default armv8a configuration of meson build sets ``RTE_CACHE_LINE_SIZE`` + to 128 then brings performance degradation. Run-time configuration ~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.22.0
Re: [dpdk-dev] [PATCH v6 04/14] doc: remove references to make from vdpadevs guides
Hi Ciara,
Looks good.
From: Ciara Power <[email protected]>
Quoted 4 lines
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
Signed-off-by Ciara Power <[email protected]>
Re: [dpdk-dev] [PATCH v6 04/14] doc: remove references to make from vdpadevs guides
In reply to Ciara Power09/10/2020 12:21, Ciara Power:
Quoted 27 lines
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
Signed-off-by Ciara Power <[email protected]>---
Compilation options
~~~~~~~~~~~~~~~~~~~doc/guides/vdpadevs/mlx5.rst +0
-19-These options can be modified in the ``.config`` file. - -- ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD`` (default **n**) - - Toggle compilation of librte_pmd_mlx5 itself. - -- ``CONFIG_RTE_IBVERBS_LINK_DLOPEN`` (default **n**) - - Build PMD with additional code to make it loadable without hard - dependencies on **libibverbs** nor **libmlx5**, which may not be installed - on the target system. - - In this mode, their presence is still required for it to run properly, - however their absence won't prevent a DPDK application from starting (with - ``CONFIG_RTE_BUILD_SHARED_LIB`` disabled) and they won't show up as - missing with ``ldd(1)``. - - It works by moving these dependencies to a purpose-built rdma-core "glue" - plug-in which must either be installed in a directory whose name is based
doc/guides/vdpadevs/mlx5.rst Prerequisites · line 96
Quoted 10 lines
doc/guides/vdpadevs/mlx5.rst +0
-10- on ``CONFIG_RTE_EAL_PMD_PATH`` suffixed with ``-glue`` if set, or in a - standard location for the dynamic linker (e.g. ``/lib``) if left to the - default empty string (``""``). - - This option has no performance impact. - -- ``CONFIG_RTE_IBVERBS_LINK_STATIC`` (default **n**) - - Embed static flavor of the dependencies **libibverbs** and **libmlx5** - in the PMD shared library or the executable static binary.
It is completely removing some information
which could be kept if mentioning the meson option "ibverbs_link".
PATCH v6 5/14 doc: remove references to make from bbdevs guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
---
v5: Added meson steps to turbo_sw doc.
--- doc/guides/bbdevs/fpga_5gnr_fec.rst | 5 +---- doc/guides/bbdevs/fpga_lte_fec.rst | 5 +---- doc/guides/bbdevs/turbo_sw.rst | 23 ++++++++--------------- 3 files changed, 10 insertions(+), 23 deletions(-)
doc/guides/bbdevs/fpga_5gnr_fec.rst +1 -4
@@ -51,10 +51,7 @@ FPGA 5GNR FEC does not support the following: Installation ------------ -Section 3 of the DPDK manual provides instructions on installing and compiling DPDK. The -default set of bbdev compile flags may be found in config/common_base, where for example -the flag to build the FPGA 5GNR FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC``, -is already set. +Section 3 of the DPDK manual provides instructions on installing and compiling DPDK. DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual. The bbdev test application has been tested with a configuration 40 x 1GB hugepages. The
doc/guides/bbdevs/fpga_lte_fec.rst +1 -4
@@ -50,10 +50,7 @@ FPGA LTE FEC does not support the following: Installation -------------- -Section 3 of the DPDK manual provides instructions on installing and compiling DPDK. The -default set of bbdev compile flags may be found in config/common_base, where for example -the flag to build the FPGA LTE FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC``, is already -set. +Section 3 of the DPDK manual provides instructions on installing and compiling DPDK. DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual. The bbdev test application has been tested with a configuration 40 x 1GB hugepages. The
doc/guides/bbdevs/turbo_sw.rst +8 -15
@@ -12,14 +12,6 @@ Note that the driver can also be built without any dependency with reduced functionality for maintenance purpose. To enable linking to the SDK libraries see detailed installation section below. -Two flags can be enabled depending on whether the target machine can support -AVX2 and AVX512 instructions sets and the related SDK libraries for vectorized -signal processing functions are installed : -- CONFIG_RTE_BBDEV_SDK_AVX2 -- CONFIG_RTE_BBDEV_SDK_AVX512 -By default these 2 flags are disabled by default. For AVX2 machine and SDK -library installed then the first flag can be enabled. For AVX512 machine and -SDK library installed then both flags can be enabled for full real time capability. This PMD supports the functions: FEC, Rate Matching and CRC functions detailed in the Features section.
@@ -144,20 +136,21 @@ In order to enable this virtual bbdev PMD, the user may: FlexRAN SDK libraries were installed. And ``DIR_WIRELESS_SDK`` to the path where the libraries were extracted. +* Tune the meson build option pointing the location of the FlexRAN SDK libraries ``flexran_sdk`` + Example: .. code-block:: console export FLEXRAN_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx2-icc/install export DIR_WIRELESS_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx2-icc/ + cd build + meson configure -Dflexran_sdk=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx512-icc/install + +* For AVX512 machines with SDK libraries installed then both 4G and 5G can be enabled for full real time FEC capability. + For AVX2 machines it is possible to only enable the 4G libraries and the PMD capabilities will be limited to 4G FEC. + If no library is present then the PMD driver will still build but its capabilities will be limited accordingly. -* Set ``CONFIG_RTE_BBDEV_SDK_AVX2=y`` and ``CONFIG_RTE_BBDEV_SDK_AVX512=y`` - in DPDK common configuration file ``config/common_base`` to be able to use - the SDK libraries as mentioned above. - For AVX2 machine it is possible to only enable CONFIG_RTE_BBDEV_SDK_AVX2 - for limited 4G functionality. - If no flag are set the PMD driver will still build but its capabilities - will be limited accordingly. To use the PMD in an application, user must:
Signature · 1 line
2.22.0
PATCH v6 6/14 doc: remove references to make from cryptodevs guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
--- doc/guides/cryptodevs/aesni_gcm.rst | 4 +- doc/guides/cryptodevs/aesni_mb.rst | 4 +- doc/guides/cryptodevs/armv8.rst | 3 -- doc/guides/cryptodevs/caam_jr.rst | 30 ------------- doc/guides/cryptodevs/ccp.rst | 12 ++---- doc/guides/cryptodevs/dpaa2_sec.rst | 25 ----------- doc/guides/cryptodevs/dpaa_sec.rst | 25 ----------- doc/guides/cryptodevs/kasumi.rst | 11 +---- doc/guides/cryptodevs/mvsam.rst | 10 +---- doc/guides/cryptodevs/nitrox.rst | 7 ---- doc/guides/cryptodevs/null.rst | 2 +- doc/guides/cryptodevs/octeontx.rst | 12 +----- doc/guides/cryptodevs/octeontx2.rst | 8 +--- doc/guides/cryptodevs/openssl.rst | 6 +-- doc/guides/cryptodevs/qat.rst | 65 +++++++---------------------- doc/guides/cryptodevs/scheduler.rst | 8 ---- doc/guides/cryptodevs/snow3g.rst | 10 +---- doc/guides/cryptodevs/virtio.rst | 20 +++------ doc/guides/cryptodevs/zuc.rst | 10 +---- 19 files changed, 38 insertions(+), 234 deletions(-)
doc/guides/cryptodevs/aesni_gcm.rst +1 -3
@@ -96,8 +96,6 @@ In order to enable this virtual crypto PMD, user must: * Build the multi buffer library (explained in Installation section). -* Set CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y in config/common_base. - To use the PMD in an application, user must: * Call rte_vdev_init("crypto_aesni_gcm") within the application.
@@ -117,5 +115,5 @@ Example: .. code-block:: console - ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_aesni_gcm,socket_id=0,max_nb_sessions=128" \ + ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_aesni_gcm,socket_id=0,max_nb_sessions=128" \ -- -p 1 --cdev SW --chain AEAD --aead_algo "aes-gcm"
doc/guides/cryptodevs/aesni_mb.rst +1 -3
@@ -131,8 +131,6 @@ In order to enable this virtual crypto PMD, user must: * Build the multi buffer library (explained in Installation section). -* Set CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y in config/common_base. - To use the PMD in an application, user must: * Call rte_vdev_init("crypto_aesni_mb") within the application.
@@ -152,7 +150,7 @@ Example: .. code-block:: console - ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_aesni_mb,socket_id=0,max_nb_sessions=128" \ + ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_aesni_mb,socket_id=0,max_nb_sessions=128" \ -- -p 1 --cdev SW --chain CIPHER_HASH --cipher_algo "aes-cbc" --auth_algo "sha1-hmac" Extra notes
doc/guides/cryptodevs/armv8.rst +0 -3
@@ -40,9 +40,6 @@ In order to enable this virtual crypto PMD, user must: make -C $ARMV8_CRYPTO_LIB_PATH/ -* Set CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=y in - config/defconfig_arm64-armv8a-linux-gcc - The corresponding device can be created only if the following features are supported by the CPU:
doc/guides/cryptodevs/caam_jr.rst +0 -30
@@ -109,36 +109,6 @@ Currently supported by DPDK: * Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file -to enable caam_jr PMD. - -Please note that enabling debugging options may affect system performance. - -* ``CONFIG_RTE_LIBRTE_PMD_CAAM_JR`` (default ``n``) - By default it is only enabled in common_linux config. - Toggle compilation of the ``librte_pmd_caam_jr`` driver. - -* ``CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE`` (default ``n``) - By default it is disabled. - It can be used when the underlying hardware supports the CAAM in BE mode. - LS1043A, LS1046A and LS1012A support CAAM in BE mode. - LS1028A supports CAAM in LE mode. - -Installations -------------- -To compile the caam_jr PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-armv8a-linux-gcc install Enabling logs -------------
doc/guides/cryptodevs/ccp.rst +4 -8
@@ -56,10 +56,8 @@ AEAD algorithms: Installation ------------ -To compile ccp PMD, it has to be enabled in the config/common_base file and openssl -packages have to be installed in the build environment. - -* ``CONFIG_RTE_LIBRTE_PMD_CCP=y`` +To compile ccp PMD, openssl packages have to be installed in the build +environment. For Ubuntu 16.04 LTS use below to install openssl in the build system:
@@ -85,8 +83,6 @@ The following command assumes ``BFD`` as ``0000:09:00.2``:: cd to the top-level DPDK directory ./usertools/dpdk-devbind.py -b igb_uio 0000:09:00.2 -In order to enable the ccp crypto PMD, user must set CONFIG_RTE_LIBRTE_PMD_CCP=y in config/common_base. - To use the PMD in an application, user must: * Call rte_vdev_init("crypto_ccp") within the application.
@@ -108,7 +104,7 @@ To validate ccp pmd, l2fwd-crypto example can be used with following command: .. code-block:: console - sudo ./build/l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp" -- -p 0x1 + sudo ./<build_dir>/examples/dpdk-l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp" -- -p 0x1 --chain CIPHER_HASH --cipher_op ENCRYPT --cipher_algo aes-cbc --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f --cipher_iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
@@ -123,7 +119,7 @@ following: .. code-block:: console - sudo ./build/l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp,ccp_auth_opt=1" -- -p 0x1 + sudo ./<build_dir>/examples/dpdk-l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp,ccp_auth_opt=1" -- -p 0x1 --chain CIPHER_HASH --cipher_op ENCRYPT --cipher_algo aes-cbc --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f --cipher_iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
doc/guides/cryptodevs/dpaa2_sec.rst +0 -25
@@ -167,31 +167,6 @@ Currently supported by DPDK: - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -Basic DPAA2 config file options are described in :ref:`dpaa2_overview`. -In addition to those, the following options can be modified in the ``config`` file -to enable DPAA2_SEC PMD. - -Please note that enabling debugging options may affect system performance. - -* ``CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC`` (default ``n``) - By default it is only enabled in defconfig_arm64-dpaa-* config. - Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver. - -Installations -------------- -To compile the DPAA2_SEC PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-dpaa-linux-gcc install Enabling logs -------------
doc/guides/cryptodevs/dpaa_sec.rst +0 -25
@@ -111,31 +111,6 @@ See :doc:`../platform/dpaa` for setup information - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -Basic DPAA config file options are described in :ref:`dpaa_overview`. -In addition to those, the following options can be modified in the ``config`` file -to enable DPAA_SEC PMD. - -Please note that enabling debugging options may affect system performance. - -* ``CONFIG_RTE_LIBRTE_PMD_DPAA_SEC`` (default ``n``) - By default it is only enabled in defconfig_arm64-dpaa-* config. - Toggle compilation of the ``librte_pmd_dpaa_sec`` driver. - -Installations -------------- -To compile the DPAA_SEC PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-dpaa-linux-gcc install Enabling logs -------------
doc/guides/cryptodevs/kasumi.rst +1 -10
@@ -89,15 +89,6 @@ In order to enable this virtual crypto PMD, user must: * Build the multi buffer library (explained in Installation section). -* Build DPDK as follows: - -.. code-block:: console - - make config T=x86_64-native-linux-gcc - sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_KASUMI\)=n,\1=y,' build/.config - make - - To use the PMD in an application, user must: * Call rte_vdev_init("crypto_kasumi") within the application.
@@ -117,7 +108,7 @@ Example: .. code-block:: console - ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_kasumi,socket_id=0,max_nb_sessions=128" \ + ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_kasumi,socket_id=0,max_nb_sessions=128" \ -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "kasumi-f8" Extra notes on KASUMI F9
doc/guides/cryptodevs/mvsam.rst +1 -9
@@ -64,14 +64,6 @@ Limitations Installation ------------ -MVSAM CRYPTO PMD driver compilation is disabled by default due to external dependencies. -Currently there are two driver specific compilation options in -``config/common_base`` available: - -- ``CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO`` (default: ``n``) - - Toggle compilation of the librte_pmd_mvsam driver. - MVSAM CRYPTO PMD requires MUSDK built with EIP197 support thus following extra option must be passed to the library configuration script:
@@ -105,7 +97,7 @@ operation: .. code-block:: console - ./l2fwd-crypto --vdev=eth_mvpp2,iface=eth0 --vdev=crypto_mvsam -- \ + ./dpdk-l2fwd-crypto --vdev=eth_mvpp2,iface=eth0 --vdev=crypto_mvsam -- \ --cipher_op ENCRYPT --cipher_algo aes-cbc \ --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f \ --auth_op GENERATE --auth_algo sha1-hmac \
doc/guides/cryptodevs/nitrox.rst +0 -7
@@ -33,13 +33,6 @@ Limitations * 3DES Cipher Only combination is not supported. * Session-less APIs are not supported. -Installation ------------- - -For compiling the Nitrox crypto PMD, please check if the -CONFIG_RTE_LIBRTE_PMD_NITROX setting is set to `y` in config/common_base file. - -* ``CONFIG_RTE_LIBRTE_PMD_NITROX=y`` Initialization --------------
doc/guides/cryptodevs/null.rst +1 -1
@@ -67,5 +67,5 @@ Example: .. code-block:: console - ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_null,socket_id=0,max_nb_sessions=128" \ + ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_null,socket_id=0,max_nb_sessions=128" \ -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "null"
doc/guides/cryptodevs/octeontx.rst +2 -10
@@ -59,14 +59,6 @@ Supported Asymmetric Crypto Algorithms * ``RTE_CRYPTO_ASYM_XFORM_RSA`` * ``RTE_CRYPTO_ASYM_XFORM_MODEX`` -Config flags ------------- - -For compiling the OCTEON TX crypto poll mode driver, please check if the -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO setting is set to `y` in -config/common_base file. - -* ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y`` Compilation -----------
@@ -135,7 +127,7 @@ application: .. code-block:: console - ./test + ./dpdk-test RTE>>cryptodev_octeontx_autotest The asymmetric crypto operations on OCTEON TX crypto PMD may be verified by running the test
@@ -143,5 +135,5 @@ application: .. code-block:: console - ./test + ./dpdk-test RTE>>cryptodev_octeontx_asym_autotest
doc/guides/cryptodevs/octeontx2.rst +2 -6
@@ -70,10 +70,6 @@ Installation The OCTEON TX2 crypto PMD may be compiled natively on an OCTEON TX2 platform or cross-compiled on an x86 platform. -Enable OCTEON TX2 crypto PMD in your config file: - -* ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO=y`` - Refer to :doc:`../platform/octeontx2` for instructions to build your DPDK application.
@@ -148,7 +144,7 @@ application: .. code-block:: console - ./test + ./dpdk-test RTE>>cryptodev_octeontx2_autotest The asymmetric crypto operations on OCTEON TX2 crypto PMD may be verified by running the test
@@ -156,7 +152,7 @@ application: .. code-block:: console - ./test + ./dpdk-test RTE>>cryptodev_octeontx2_asym_autotest
doc/guides/cryptodevs/openssl.rst +3 -3
@@ -58,8 +58,8 @@ Supported Asymmetric Crypto algorithms: Installation ------------ -To compile openssl PMD, it has to be enabled in the config/common_base file -and appropriate openssl packages have to be installed in the build environment. +To compile openssl PMD, appropriate openssl packages have to be installed +in the build environment. The newest openssl library version is supported:
@@ -93,7 +93,7 @@ To verify real traffic l2fwd-crypto example can be used with this command: .. code-block:: console - sudo ./build/l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_openssl" + sudo ./<build_dir>/examples/dpdk-l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_openssl" --vdev "crypto_openssl"-- -p 0x3 --chain CIPHER_HASH --cipher_op ENCRYPT --cipher_algo AES_CBC --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
doc/guides/cryptodevs/qat.rst +15 -50
121 lines not on this page · raw message
doc/guides/cryptodevs/scheduler.rst +0 -8
@@ -32,14 +32,6 @@ Limitations is enabled. -Installation ------------- - -To build DPDK with CRYTPO_SCHEDULER_PMD the user is required to set -CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y in config/common_base, and -recompile DPDK - - Initialization --------------
doc/guides/cryptodevs/snow3g.rst +1 -9
@@ -88,14 +88,6 @@ In order to enable this virtual crypto PMD, user must: * Build the multi buffer library (explained in Installation section). -* Build DPDK as follows: - -.. code-block:: console - - make config T=x86_64-native-linux-gcc - sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_SNOW3G\)=n,\1=y,' build/.config - make - To use the PMD in an application, user must: * Call rte_vdev_init("crypto_snow3g") within the application.
@@ -115,5 +107,5 @@ Example: .. code-block:: console - ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_snow3g,socket_id=0,max_nb_sessions=128" \ + ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_snow3g,socket_id=0,max_nb_sessions=128" \ -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "snow3g-uea2"
doc/guides/cryptodevs/virtio.rst +5 -15
@@ -83,27 +83,17 @@ The unit test cases can be tested as below: .. code-block:: console reserve enough huge pages - cd to the top-level DPDK directory - export RTE_TARGET=x86_64-native-linux-gcc - export RTE_SDK=`pwd` - cd to app/test - type the command "make" to compile - run the tests with "./test" - type the command "cryptodev_virtio_autotest" to test + cd to <build_dir> + meson test cryptodev_virtio_autotest The performance can be tested as below: .. code-block:: console reserve enough huge pages - cd to the top-level DPDK directory - export RTE_TARGET=x86_64-native-linux-gcc - export RTE_SDK=`pwd` - cd to app/test-crypto-perf - type the command "make" to compile - run the tests with the following command: - - ./dpdk-test-crypto-perf -l 0,1 -- --devtype crypto_virtio \ + cd to <build_dir> + + ./app/dpdk-test-crypto-perf -l 0,1 -- --devtype crypto_virtio \ --ptest throughput --optype cipher-then-auth --cipher-algo aes-cbc \ --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac \ --auth-op generate --auth-key-sz 64 --digest-sz 12 \
doc/guides/cryptodevs/zuc.rst +1 -9
@@ -88,14 +88,6 @@ In order to enable this virtual crypto PMD, user must: * Build the multi buffer library (explained in Installation section). -* Build DPDK as follows: - -.. code-block:: console - - make config T=x86_64-native-linux-gcc - sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_ZUC\)=n,\1=y,' build/.config - make - To use the PMD in an application, user must: * Call rte_vdev_init("crypto_zuc") within the application.
@@ -115,5 +107,5 @@ Example: .. code-block:: console - ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_zuc,socket_id=0,max_nb_sessions=128" \ + ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_zuc,socket_id=0,max_nb_sessions=128" \ -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "zuc-eea3"
Signature · 1 line
2.22.0
Re: [dpdk-dev] [PATCH v6 06/14] doc: remove references to make from cryptodevs guides
Quoted 7 lines
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
Signed-off-by Ciara Power <[email protected]>Reviewed-by Kevin Laatz <[email protected]>---
The overall patch looks good. But there are some PMDs which are not enabled by default. The documentation should cover how to enable them using meson and what all paths need To be set. For example: aesni-mb, aesni-gcm, armv8-crypto, openssl.
I believe PMD owners should send the patch for fixing this in documentation.
PATCH v6 7/14 doc: remove references to make from compressdevs guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
--- doc/guides/compressdevs/isal.rst | 4 ---- doc/guides/compressdevs/octeontx.rst | 24 ++---------------------- doc/guides/compressdevs/zlib.rst | 4 ---- 3 files changed, 2 insertions(+), 30 deletions(-)
doc/guides/compressdevs/isal.rst +0 -4
@@ -133,10 +133,6 @@ Installation Initialization -------------- -In order to enable this virtual compression PMD, user must: - -* Set ``CONFIG_RTE_LIBRTE_PMD_ISAL=y`` in config/common_base. - To use the PMD in an application, user must: * Call ``rte_vdev_init("compress_isal")`` within the application.
doc/guides/compressdevs/octeontx.rst +2 -22
@@ -56,21 +56,6 @@ Steps To Setup Platform SDK and related information can be obtained from: `Cavium support site <https://support.cavium.com/>`_. -Installation ------------- - -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the OCTEON TX ZIP PMD for Linux arm64 gcc target, run the -following ``make`` command: - - .. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-thunderx-linux-gcc install - - Initialization --------------
@@ -96,10 +81,5 @@ probed. To use the PMD in an application, user must: .. code-block:: console reserve enough huge pages - cd to the top-level DPDK directory - export RTE_TARGET=arm64-thunderx-linux-gcc - export RTE_SDK=`pwd` - cd to app/test - type the command "make" to compile - run the tests with "./test" - type the command "compressdev_autotest" to test + cd to <build_dir> + meson test compressdev_autotest
doc/guides/compressdevs/zlib.rst +0 -4
@@ -53,10 +53,6 @@ Installation Initialization -------------- -In order to enable this virtual compression PMD, user must: - -* Set ``CONFIG_RTE_LIBRTE_PMD_ZLIB=y`` in config/common_base. - To use the PMD in an application, user must: * Call ``rte_vdev_init("compress_zlib")`` within the application.
Signature · 1 line
2.22.0
PATCH v6 8/14 doc: remove references to make from eventdevs guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
--- doc/guides/eventdevs/dpaa.rst | 20 -------------------- doc/guides/eventdevs/dpaa2.rst | 20 -------------------- doc/guides/eventdevs/octeontx.rst | 24 ------------------------ doc/guides/eventdevs/octeontx2.rst | 8 -------- 4 files changed, 72 deletions(-)
doc/guides/eventdevs/dpaa.rst +0 -20
@@ -43,26 +43,6 @@ Currently supported by DPDK: Pre-Installation Configuration ------------------------------ -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV`` (default ``y``) - - Toggle compilation of the ``librte_pmd_dpaa_event`` driver. - -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the DPAA EVENTDEV PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-dpaa-linux-gcc install Initialization --------------
doc/guides/eventdevs/dpaa2.rst +0 -20
@@ -52,26 +52,6 @@ Currently supported by DPDK: Pre-Installation Configuration ------------------------------ -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV`` (default ``y``) - - Toggle compilation of the ``lrte_pmd_dpaa2_event`` driver. - -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the DPAA2 EVENTDEV PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-dpaa-linux-gcc install Initialization --------------
doc/guides/eventdevs/octeontx.rst +0 -24
@@ -41,30 +41,6 @@ Prerequisites See :doc:`../platform/octeontx` for setup information. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF`` (default ``y``) - - Toggle compilation of the ``librte_pmd_octeontx_ssovf`` driver. - -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the OCTEON TX SSOVF PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-thunderx-linux-gcc install - Initialization --------------
doc/guides/eventdevs/octeontx2.rst +0 -8
@@ -47,14 +47,6 @@ Prerequisites and Compilation procedure Pre-Installation Configuration ------------------------------ -Compile time Config Options -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The following option can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV`` (default ``y``) - - Toggle compilation of the ``librte_pmd_octeontx2_event`` driver. Runtime Config Options ~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.22.0
Re: [dpdk-dev] [PATCH v6 08/14] doc: remove references to make from eventdevs guides
09/10/2020 12:21, Ciara Power:
Quoted 17 lines
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
Signed-off-by Ciara Power <[email protected]>Reviewed-by Kevin Laatz <[email protected]>--- doc/guides/eventdevs/dpaa.rst | 20 -------------------- doc/guides/eventdevs/dpaa2.rst | 20 -------------------- doc/guides/eventdevs/octeontx.rst | 24 ------------------------ doc/guides/eventdevs/octeontx2.rst | 8 -------- 4 files changed, 72 deletions(-)doc/guides/eventdevs/dpaa.rst +0
-0
doc/guides/eventdevs/dpaa.rst Currently supported by DPDK: · line 44
Quoted 2 lines
doc/guides/eventdevs/dpaa.rst +0
-0@@ -43,26 +43,6 @@ Currently supported by DPDK: Pre-Installation Configuration ------------------------------
This section becomes empty and can be removed.
Quoted 29 lines
doc/guides/eventdevs/dpaa.rst +0
-20-Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV`` (default ``y``) - - Toggle compilation of the ``librte_pmd_dpaa_event`` driver. - -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the DPAA EVENTDEV PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-dpaa-linux-gcc install Initialization --------------doc/guides/eventdevs/dpaa2.rst +0
-0
doc/guides/eventdevs/dpaa2.rst Currently supported by DPDK: · line 53
Quoted 2 lines
doc/guides/eventdevs/dpaa2.rst +0
-0@@ -52,26 +52,6 @@ Currently supported by DPDK: Pre-Installation Configuration ------------------------------
This section becomes empty and can be removed.
Quoted 63 lines
doc/guides/eventdevs/dpaa2.rst +0
-20-Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV`` (default ``y``) - - Toggle compilation of the ``lrte_pmd_dpaa2_event`` driver. - -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the DPAA2 EVENTDEV PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-dpaa-linux-gcc install Initialization --------------doc/guides/eventdevs/octeontx.rst +0
-24@@ -41,30 +41,6 @@ Prerequisites See :doc:`../platform/octeontx` for setup information. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. -Please note that enabling debugging options may affect system performance. - -- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF`` (default ``y``) - - Toggle compilation of the ``librte_pmd_octeontx_ssovf`` driver. - -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the OCTEON TX SSOVF PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-thunderx-linux-gcc install - Initialization --------------doc/guides/eventdevs/octeontx2.rst +0
-0
doc/guides/eventdevs/octeontx2.rst Prerequisites and Compilation procedure · line 48
Quoted 2 lines
doc/guides/eventdevs/octeontx2.rst +0
-0@@ -47,14 +47,6 @@ Prerequisites and Compilation procedure Pre-Installation Configuration ------------------------------
This title doesn't really make any sense now.
If think sub-titles could be promoted to an highel level.
Quoted 13 lines
doc/guides/eventdevs/octeontx2.rst +0
-8-Compile time Config Options -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The following option can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV`` (default ``y``) - - Toggle compilation of the ``librte_pmd_octeontx2_event`` driver. Runtime Config Options ~~~~~~~~~~~~~~~~~~~~~~
PATCH v6 9/14 doc: remove references to make from rawdevs guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
---
v6: Modified compilation section for ioat based on v5 feedback.
--- doc/guides/rawdevs/dpaa2_cmdif.rst | 21 --------------------- doc/guides/rawdevs/dpaa2_qdma.rst | 21 --------------------- doc/guides/rawdevs/ifpga.rst | 10 ---------- doc/guides/rawdevs/ntb.rst | 6 ------ doc/guides/rawdevs/octeontx2_dma.rst | 12 ------------ doc/guides/rawdevs/octeontx2_ep.rst | 8 -------- 6 files changed, 78 deletions(-)
doc/guides/rawdevs/dpaa2_cmdif.rst +0 -21
@@ -44,17 +44,6 @@ Currently supported by DPDK: Some part of fslmc bus code (mc flib - object library) routines are dual licensed (BSD & GPLv2). -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV`` (default ``y``) - - Toggle compilation of the ``lrte_pmd_dpaa2_cmdif`` driver. Enabling logs -------------
@@ -68,16 +57,6 @@ For enabling logs, use the following EAL parameter: Using ``pmd.raw.dpaa2.cmdif`` as log matching criteria, all Event PMD logs can be enabled which are lower than logging ``level``. -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the DPAA2 CMDIF PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-dpaa-linux-gcc install Initialization --------------
doc/guides/rawdevs/dpaa2_qdma.rst +0 -21
@@ -48,17 +48,6 @@ Currently supported by DPDK: Some part of fslmc bus code (mc flib - object library) routines are dual licensed (BSD & GPLv2). -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV`` (default ``y``) - - Toggle compilation of the ``lrte_pmd_dpaa2_qdma`` driver. Enabling logs -------------
@@ -72,16 +61,6 @@ For enabling logs, use the following EAL parameter: Using ``pmd.raw.dpaa2.qdma`` as log matching criteria, all Event PMD logs can be enabled which are lower than logging ``level``. -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile the DPAA2 QDMA PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-dpaa-linux-gcc install Initialization --------------
doc/guides/rawdevs/ifpga.rst +0 -10
@@ -76,16 +76,6 @@ summarized by the following block diagram:: | vdev_ifpga_cfg driver | | Intel FpgaDev | +------------------------------------+ +-----------------+ -Build options -------------- - -- ``CONFIG_RTE_LIBRTE_IFPGA_BUS`` (default ``y``) - - Toggle compilation of IFPGA Bus library. - -- ``CONFIG_RTE_LIBRTE_IFPGA_RAWDEV`` (default ``y``) - - Toggle compilation of the ``ifpga_rawdev`` driver. Run-time parameters -------------------
doc/guides/rawdevs/ntb.rst +0 -6
@@ -30,12 +30,6 @@ Skylake is https://www.intel.com/content/dam/support/us/en/documents/server-prod - Disable PCIe PII SSC (Spread Spectrum Clocking) for both hosts. This is a hardware requirement. -Build Options -------------- - -- ``CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV`` (default ``y``) - - Toggle compilation of the ``ntb`` driver. Device Setup ------------
doc/guides/rawdevs/octeontx2_dma.rst +0 -12
@@ -26,18 +26,6 @@ Prerequisites and Compilation procedure See :doc:`../platform/octeontx2` for setup information. -Pre-Installation Configuration ------------------------------- - -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV`` (default ``y``) - - Toggle compilation of the ``lrte_pmd_octeontx2_dma`` driver. - Enabling logs -------------
doc/guides/rawdevs/octeontx2_ep.rst +0 -8
@@ -18,14 +18,6 @@ This OCTEON TX2 End Point mode PMD supports #. Packet Output - OCTEON TX2 to Host with info pointer mode. -Config File Options -~~~~~~~~~~~~~~~~~~~ - -The following options can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV`` (default ``y``) - - Toggle compilation of the ``lrte_pmd_octeontx2_ep`` driver. Initialization --------------
Signature · 1 line
2.22.0
PATCH v6 10/14 doc: remove references to make from app guides
In reply to Ciara PowerWhile make has been deprecated for DPDK, it's still applicable for some example apps to be built standalone, this patch adjusts the guides to take that into consideration.
---
v6: Modified commit log based on suggestions on v5.
--- doc/guides/sample_app_ug/bbdev_app.rst | 34 ++------ doc/guides/sample_app_ug/cmd_line.rst | 2 +- doc/guides/sample_app_ug/compiling.rst | 83 +++++++------------ doc/guides/sample_app_ug/dist_app.rst | 4 +- doc/guides/sample_app_ug/ethtool.rst | 2 +- .../sample_app_ug/eventdev_pipeline.rst | 3 +- doc/guides/sample_app_ug/fips_validation.rst | 10 +-- doc/guides/sample_app_ug/flow_classify.rst | 4 +- doc/guides/sample_app_ug/flow_filtering.rst | 25 +----- doc/guides/sample_app_ug/hello_world.rst | 2 +- doc/guides/sample_app_ug/ioat.rst | 6 +- doc/guides/sample_app_ug/ip_frag.rst | 6 +- doc/guides/sample_app_ug/ip_pipeline.rst | 4 +- doc/guides/sample_app_ug/ip_reassembly.rst | 9 +- doc/guides/sample_app_ug/ipsec_secgw.rst | 14 +--- doc/guides/sample_app_ug/ipv4_multicast.rst | 4 +- doc/guides/sample_app_ug/keep_alive.rst | 4 +- .../sample_app_ug/kernel_nic_interface.rst | 14 ++-- doc/guides/sample_app_ug/l2_forward_cat.rst | 4 +- .../sample_app_ug/l2_forward_crypto.rst | 4 +- doc/guides/sample_app_ug/l2_forward_event.rst | 10 +-- .../sample_app_ug/l2_forward_job_stats.rst | 4 +- .../sample_app_ug/l2_forward_real_virtual.rst | 6 +- doc/guides/sample_app_ug/l3_forward.rst | 10 +-- .../sample_app_ug/l3_forward_access_ctrl.rst | 6 +- doc/guides/sample_app_ug/l3_forward_graph.rst | 4 +- .../sample_app_ug/l3_forward_power_man.rst | 14 ++-- doc/guides/sample_app_ug/link_status_intr.rst | 4 +- doc/guides/sample_app_ug/multi_process.rst | 20 ++--- doc/guides/sample_app_ug/ntb.rst | 2 +- doc/guides/sample_app_ug/packet_ordering.rst | 3 +- .../sample_app_ug/performance_thread.rst | 44 +++------- doc/guides/sample_app_ug/ptpclient.rst | 9 +- doc/guides/sample_app_ug/qos_metering.rst | 2 +- doc/guides/sample_app_ug/qos_scheduler.rst | 10 +-- doc/guides/sample_app_ug/rxtx_callbacks.rst | 9 +- doc/guides/sample_app_ug/server_node_efd.rst | 2 +- doc/guides/sample_app_ug/service_cores.rst | 23 +---- doc/guides/sample_app_ug/skeleton.rst | 2 +- doc/guides/sample_app_ug/tep_termination.rst | 43 +++------- doc/guides/sample_app_ug/test_pipeline.rst | 4 +- doc/guides/sample_app_ug/timer.rst | 2 +- doc/guides/sample_app_ug/vdpa.rst | 4 +- doc/guides/sample_app_ug/vhost.rst | 11 +-- doc/guides/sample_app_ug/vhost_blk.rst | 2 +- doc/guides/sample_app_ug/vhost_crypto.rst | 2 +- .../sample_app_ug/vm_power_management.rst | 34 ++++---- .../sample_app_ug/vmdq_dcb_forwarding.rst | 8 +- doc/guides/sample_app_ug/vmdq_forwarding.rst | 8 +- doc/guides/testpmd_app_ug/run_app.rst | 6 +- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 +- 51 files changed, 199 insertions(+), 356 deletions(-)
doc/guides/sample_app_ug/bbdev_app.rst +8 -26
@@ -31,30 +31,12 @@ Limitations Compiling the Application ------------------------- -#. DPDK needs to be built with ``baseband_turbo_sw`` PMD driver enabled along - with ``FLEXRAN SDK`` Libraries. Refer to *SW Turbo Poll Mode Driver* - documentation for more details on this. +DPDK needs to be built with ``baseband_turbo_sw`` PMD driver enabled along +with ``FLEXRAN SDK`` Libraries. Refer to *SW Turbo Poll Mode Driver* +documentation for more details on this. -#. Go to the example directory: +To compile the sample application see :doc:`compiling`. - .. code-block:: console - - export RTE_SDK=/path/to/rte_sdk - cd ${RTE_SDK}/examples/bbdev_app - -#. Set the target (a default target is used if not specified). For example: - - .. code-block:: console - - export RTE_TARGET=x86_64-native-linux-gcc - - See the *DPDK Getting Started Guide* for possible RTE_TARGET values. - -#. Build the application: - - .. code-block:: console - - make Running the Application -----------------------
@@ -63,8 +45,8 @@ The application accepts a number of command line options: .. code-block:: console - $ ./build/bbdev [EAL options] -- [-e ENCODING_CORES] [-d DECODING_CORES] / - [-p ETH_PORT_ID] [-b BBDEV_ID] + $ ./<build_dir>/examples/dpdk-bbdev [EAL options] -- [-e ENCODING_CORES] / + [-d DECODING_CORES] [-p ETH_PORT_ID] [-b BBDEV_ID] where:
@@ -84,8 +66,8 @@ issue the command: .. code-block:: console - $ ./build/bbdev --vdev='baseband_turbo_sw' -w <NIC0PCIADDR> -c 0x38 --socket-mem=2,2 \ - --file-prefix=bbdev -- -e 0x10 -d 0x20 + $ ./<build_dir>/examples/dpdk-bbdev --vdev='baseband_turbo_sw' -w <NIC0PCIADDR> \ + -c 0x38 --socket-mem=2,2 --file-prefix=bbdev -- -e 0x10 -d 0x20 where, NIC0PCIADDR is the PCI address of the Rx port
doc/guides/sample_app_ug/cmd_line.rst +1 -1
@@ -52,7 +52,7 @@ To run the application in linux environment, issue the following command: .. code-block:: console - $ ./build/cmdline -l 0-3 -n 4 + $ ./<build_dir>/examples/dpdk-cmdline -l 0-3 -n 4 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/compiling.rst +29 -54
129 lines not on this page · raw message
doc/guides/sample_app_ug/dist_app.rst +2 -2
@@ -42,7 +42,7 @@ Running the Application .. code-block:: console - ./build/distributor_app [EAL options] -- -p PORTMASK + ./<build-dir>/examples/dpdk-distributor [EAL options] -- -p PORTMASK where,
@@ -53,7 +53,7 @@ Running the Application .. code-block:: console - $ ./build/distributor_app -l 1-9,22 -n 4 -- -p f + $ ./<build-dir>/examples/dpdk-distributor -l 1-9,22 -n 4 -- -p f #. Refer to the DPDK Getting Started Guide for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/ethtool.rst +1 -1
@@ -24,7 +24,7 @@ The only available options are the standard ones for the EAL: .. code-block:: console - ./ethtool-app/${RTE_TARGET}/ethtool [EAL options] + ./<build_dir>/examples/dpdk-ethtool [EAL options] Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL)
doc/guides/sample_app_ug/eventdev_pipeline.rst +2 -1
@@ -46,7 +46,8 @@ these settings is shown below: .. code-block:: console - ./build/eventdev_pipeline --vdev event_sw0 -- -r1 -t1 -e4 -w FF00 -s4 -n0 -c32 -W1000 -D + ./<build_dir>/examples/dpdk-eventdev_pipeline --vdev event_sw0 -- -r1 -t1 / + -e4 -w FF00 -s4 -n0 -c32 -W1000 -D The application has some sanity checking built-in, so if there is a function (e.g.; the RX core) which doesn't have a cpu core mask assigned, the application
doc/guides/sample_app_ug/fips_validation.rst +4 -6
@@ -70,9 +70,7 @@ Compiling the Application * Compile Application - .. code-block:: console - - make -C examples/fips_validation + To compile the sample application see :doc:`compiling`. * Run ``dos2unix`` on the request files
@@ -92,7 +90,7 @@ The application requires a number of command line options: .. code-block:: console - ./fips_validation [EAL options] + ./dpdk-fips_validation [EAL options] -- --req-file FILE_PATH/FOLDER_PATH --rsp-file FILE_PATH/FOLDER_PATH [--cryptodev DEVICE_NAME] [--cryptodev-id ID] [--path-is-folder]
@@ -117,7 +115,7 @@ file for crypto_aesni_mb PMD, issue the command: .. code-block:: console - $ ./fips_validation --vdev crypto_aesni_mb -- + $ ./dpdk-fips_validation --vdev crypto_aesni_mb -- --req-file /PATH/TO/REQUEST/FILE.req --rsp-file ./PATH/TO/RESPONSE/FILE.rsp --cryptodev crypto_aesni_mb
@@ -126,7 +124,7 @@ data files in one folder for crypto_aesni_gcm PMD, issue the command: .. code-block:: console - $ ./fips_validation --vdev crypto_aesni_gcm0 -- + $ ./dpdk-fips_validation --vdev crypto_aesni_gcm0 -- --req-file /PATH/TO/REQUEST/FILE/FOLDER/ --rsp-file ./PATH/TO/RESPONSE/FILE/FOLDER/ --cryptodev-id 0 --path-is-folder
doc/guides/sample_app_ug/flow_classify.rst +2 -2
@@ -28,8 +28,8 @@ To run the example in a ``linux`` environment: .. code-block:: console - cd ~/dpdk/examples/flow_classify - ./build/flow_classify -c 4 -n 4 -- --rule_ipv4="../ipv4_rules_file.txt" + ./<build_dir>/examples/dpdk-flow_classify -c 4 -n 4 -- / + --rule_ipv4="../ipv4_rules_file.txt" Please refer to the *DPDK Getting Started Guide*, section :doc:`../linux_gsg/build_sample_apps`
doc/guides/sample_app_ug/flow_filtering.rst +2 -23
@@ -13,28 +13,7 @@ It is intended as a demonstration of the basic components RTE flow rules. Compiling the Application ------------------------- -To compile the application export the path to the DPDK source tree and go to -the example directory: - -.. code-block:: console - - export RTE_SDK=/path/to/rte_sdk - - cd ${RTE_SDK}/examples/flow_filtering - -Set the target, for example: - -.. code-block:: console - - export RTE_TARGET=x86_64-native-linux-gcc - -See the *DPDK Getting Started* Guide for possible ``RTE_TARGET`` values. - -Build the application as follows: - -.. code-block:: console - - make +To compile the sample application see :doc:`compiling`. Running the Application
@@ -44,7 +23,7 @@ To run the example in a ``linux`` environment: .. code-block:: console - ./build/flow -l 1 -n 1 + ./<build_dir>/examples/dpdk-flow_filtering -l 1 -n 1 Refer to *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/hello_world.rst +1 -1
@@ -21,7 +21,7 @@ To run the example in a linux environment: .. code-block:: console - $ ./build/helloworld -l 0-3 -n 4 + $ ./<build_dir>/examples/dpdk-helloworld -l 0-3 -n 4 Refer to *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/ioat.rst +3 -3
@@ -45,7 +45,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/ioatfwd [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>] + ./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>] [--[no-]mac-updating] where,
@@ -81,7 +81,7 @@ updating issue the command: .. code-block:: console - $ ./build/ioatfwd -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw + $ ./<build_dir>/examples/dpdk-ioat -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw To run the application in a Linux environment with 2 lcores (the master lcore, plus one forwarding core), 2 ports (ports 0 and 1), hardware copying and no MAC
@@ -89,7 +89,7 @@ updating issue the command: .. code-block:: console - $ ./build/ioatfwd -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw + $ ./<build_dir>/examples/dpdk-ioat -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/ip_frag.rst +3 -3
@@ -53,7 +53,7 @@ Application usage: .. code-block:: console - ./build/ip_fragmentation [EAL options] -- -p PORTMASK [-q NQ] + ./<build_dir>/examples/dpdk-ip_fragmentation [EAL options] -- -p PORTMASK [-q NQ] where:
@@ -65,7 +65,7 @@ To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) wi .. code-block:: console - ./build/ip_fragmentation -l 2,4 -n 3 -- -p 5 + ./<build_dir>/examples/dpdk-ip_fragmentation -l 2,4 -n 3 -- -p 5 EAL: coremask set to 14 EAL: Detected lcore 0 on socket 0 EAL: Detected lcore 1 on socket 1
@@ -94,7 +94,7 @@ To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with .. code-block:: console - ./build/ip_fragmentation -l 4 -n 3 -- -p 5 -q 2 + ./<build_dir>/examples/dpdk-ip_fragmentation -l 4 -n 3 -- -p 5 -q 2 To test the application, flows should be set up in the flow generator that match the values in the l3fwd_ipv4_route_array and/or l3fwd_ipv6_route_array table.
doc/guides/sample_app_ug/ip_pipeline.rst +2 -2
@@ -34,7 +34,7 @@ Running the application The application startup command line is:: - ip_pipeline [EAL_ARGS] -- [-s SCRIPT_FILE] [-h HOST] [-p PORT] + dpdk-ip_pipeline [EAL_ARGS] -- [-s SCRIPT_FILE] [-h HOST] [-p PORT] The application startup arguments are:
@@ -71,7 +71,7 @@ The following is an example command to run ip pipeline application configured fo .. code-block:: console - $ ./build/ip_pipeline -c 0x3 -- -s examples/route_ecmp.cli + $ ./<build_dir>/examples/dpdk-ip_pipeline -c 0x3 -- -s examples/route_ecmp.cli The application should start successfully and display as follows:
doc/guides/sample_app_ug/ip_reassembly.rst +5 -4
@@ -42,7 +42,7 @@ The application has a number of command line options: .. code-block:: console - ./build/ip_reassembly [EAL options] -- -p PORTMASK [-q NQ] [--maxflows=FLOWS>] [--flowttl=TTL[(s|ms)]] + ./<build_dir>/examples/dpdk-ip_reassembly [EAL options] -- -p PORTMASK [-q NQ] [--maxflows=FLOWS>] [--flowttl=TTL[(s|ms)]] where:
@@ -61,7 +61,7 @@ To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) wi .. code-block:: console - ./build/ip_reassembly -l 2,4 -n 3 -- -p 5 + ./<build_dir>/examples/dpdk-ip_reassembly -l 2,4 -n 3 -- -p 5 EAL: coremask set to 14 EAL: Detected lcore 0 on socket 0 EAL: Detected lcore 1 on socket 1
@@ -92,7 +92,7 @@ To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with .. code-block:: console - ./build/ip_reassembly -l 4 -n 3 -- -p 5 -q 2 + ./<build_dir>/examples/dpdk-ip_reassembly -l 4 -n 3 -- -p 5 -q 2 To test the application, flows should be set up in the flow generator that match the values in the l3fwd_ipv4_route_array and/or l3fwd_ipv6_route_array table.
@@ -231,7 +231,8 @@ Debug logging and Statistics Collection ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The RTE_LIBRTE_IP_FRAG_TBL_STAT controls statistics collection for the IP Fragment Table. -This macro is disabled by default. +This macro is disabled by default, but it can be enabled by modifying the appropriate line +in ``config/rte_config.h``. To make ip_reassembly print the statistics to the standard output, the user must send either an USR1, INT or TERM signal to the process. For all of these signals, the ip_reassembly process prints Fragment table statistics for each RX queue,
doc/guides/sample_app_ug/ipsec_secgw.rst +4 -10
@@ -116,12 +116,6 @@ To compile the sample application see :doc:`compiling`. The application is located in the ``ipsec-secgw`` sub-directory. -#. [Optional] Build the application for debugging: - This option adds some extra flags, disables compiler optimizations and - is verbose:: - - make DEBUG=1 - Running the Application -----------------------
@@ -129,7 +123,7 @@ Running the Application The application has a number of command line options:: - ./build/ipsec-secgw [EAL options] -- + ./<build_dir>/examples/dpdk-ipsec-secgw [EAL options] -- -p PORTMASK -P -u PORTMASK -j FRAMESIZE -l -w REPLAY_WINOW_SIZE -e -a -c SAD_CACHE_SIZE
@@ -245,7 +239,7 @@ The mapping of lcores to port/queues is similar to other l3fwd applications. For example, given the following command line to run application in poll mode:: - ./build/ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \ + ./<build_dir>/examples/dpdk-ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \ --vdev "crypto_null" -- -p 0xf -P -u 0x3 \ --config="(0,0,20),(1,0,20),(2,0,21),(3,0,21)" \ -f /path/to/config_file --transfer-mode poll \
@@ -297,7 +291,7 @@ where each option means: Similarly for example, given the following command line to run application in event app mode:: - ./build/ipsec-secgw -c 0x3 -- -P -p 0x3 -u 0x1 \ + ./<build_dir>/examples/dpdk-ipsec-secgw -c 0x3 -- -P -p 0x3 -u 0x1 \ -f /path/to/config_file --transfer-mode event \ --event-schedule-type parallel \
@@ -336,7 +330,7 @@ For example, something like the following command line: .. code-block:: console - ./build/ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \ + ./<build_dir>/examples/dpdk-ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \ -w 81:00.0 -w 81:00.1 -w 81:00.2 -w 81:00.3 \ --vdev "crypto_aesni_mb" --vdev "crypto_null" \ -- \
doc/guides/sample_app_ug/ipv4_multicast.rst +2 -2
@@ -50,7 +50,7 @@ The application has a number of command line options: .. code-block:: console - ./build/ipv4_multicast [EAL options] -- -p PORTMASK [-q NQ] + ./<build_dir>/examples/dpdk-ipv4_multicast [EAL options] -- -p PORTMASK [-q NQ] where,
@@ -67,7 +67,7 @@ Typically, to run the IPv4 Multicast sample application, issue the following com .. code-block:: console - ./build/ipv4_multicast -l 0-3 -n 3 -- -p 0x3 -q 1 + ./<build_dir>/examples/dpdk-ipv4_multicast -l 0-3 -n 3 -- -p 0x3 -q 1 In this command:
doc/guides/sample_app_ug/keep_alive.rst +2 -2
@@ -49,7 +49,7 @@ The application has a number of command line options: .. code-block:: console - ./build/l2fwd-keepalive [EAL options] \ + ./<build_dir>/examples/dpdk-l2fwd-keepalive [EAL options] \ -- -p PORTMASK [-q NQ] [-K PERIOD] [-T PERIOD] where,
@@ -68,7 +68,7 @@ To run the application in linux environment with 4 lcores, 16 ports .. code-block:: console - ./build/l2fwd-keepalive -l 0-3 -n 4 -- -q 8 -p ffff -K 10 + ./<build_dir>/examples/dpdk-l2fwd-keepalive -l 0-3 -n 4 -- -q 8 -p ffff -K 10 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL)
doc/guides/sample_app_ug/kernel_nic_interface.rst +7 -7
@@ -96,7 +96,7 @@ The ``kni`` example application requires a number of command line options: .. code-block:: console - kni [EAL options] -- -p PORTMASK --config="(port,lcore_rx,lcore_tx[,lcore_kthread,...])[,(port,lcore_rx,lcore_tx[,lcore_kthread,...])]" [-P] [-m] + dpdk-kni [EAL options] -- -p PORTMASK --config="(port,lcore_rx,lcore_tx[,lcore_kthread,...])[,(port,lcore_rx,lcore_tx[,lcore_kthread,...])]" [-P] [-m] Where:
@@ -168,8 +168,8 @@ interface ``vEth1_0`` with the kernel thread bound to lcore 9. .. code-block:: console # rmmod rte_kni - # insmod kmod/rte_kni.ko kthread_mode=multiple - # ./build/kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8),(1,5,7,9)" + # insmod <build_dir>/kernel/linux/kni/rte_kni.ko kthread_mode=multiple + # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8),(1,5,7,9)" The following example is identical, except an additional ``lcore_kthread`` core is specified per physical port. In this case, ``kni`` will create
@@ -186,8 +186,8 @@ The kernel thread for each interface will be bound as follows: .. code-block:: console # rmmod rte_kni - # insmod kmod/rte_kni.ko kthread_mode=multiple - # ./build/kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8,10),(1,5,7,9,11)" + # insmod <build_dir>/kernel/linux/kni/rte_kni.ko kthread_mode=multiple + # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8,10),(1,5,7,9,11)" The following example can be used to test the interface between the ``kni`` test application and the ``rte_kni`` kernel module. In this example,
@@ -206,8 +206,8 @@ disabled by **not** specifying the ``-m`` flag to ``kni``: .. code-block:: console # rmmod rte_kni - # insmod kmod/rte_kni.ko lo_mode=lo_mode_fifo carrier=on - # ./build/kni -l 4-7 -n 4 -- -P -p 0x3 --config="(0,4,6,8),(1,5,7,9)" + # insmod <build_dir>/kernel/linux/kni/rte_kni.ko lo_mode=lo_mode_fifo carrier=on + # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 --config="(0,4,6,8),(1,5,7,9)" KNI Operations --------------
doc/guides/sample_app_ug/l2_forward_cat.rst +2 -2
@@ -70,13 +70,13 @@ To run the example in a ``linux`` environment and enable CAT on cpus 0-2: .. code-block:: console - ./build/l2fwd-cat -l 1 -n 4 -- --l3ca="0x3@(0-2)" + ./<build_dir>/examples/dpdk-l2fwd-cat -l 1 -n 4 -- --l3ca="0x3@(0-2)" or to enable CAT and CDP on cpus 1,3: .. code-block:: console - ./build/l2fwd-cat -l 1 -n 4 -- --l3ca="(0x00C00,0x00300)@(1,3)" + ./<build_dir>/examples/dpdk-l2fwd-cat -l 1 -n 4 -- --l3ca="(0x00C00,0x00300)@(1,3)" If CDP is not supported it will fail with following error message:
doc/guides/sample_app_ug/l2_forward_crypto.rst +2 -2
@@ -39,7 +39,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/l2fwd-crypto [EAL options] -- [-p PORTMASK] [-q NQ] [-s] [-T PERIOD] / + ./<build_dir>/examples/dpdk-l2fwd-crypto [EAL options] -- [-p PORTMASK] [-q NQ] [-s] [-T PERIOD] / [--cdev_type HW/SW/ANY] [--chain HASH_CIPHER/CIPHER_HASH/CIPHER_ONLY/HASH_ONLY/AEAD] / [--cipher_algo ALGO] [--cipher_op ENCRYPT/DECRYPT] [--cipher_key KEY] / [--cipher_key_random_size SIZE] [--cipher_iv IV] [--cipher_iv_random_size SIZE] /
@@ -162,7 +162,7 @@ To run the application in linux environment with 2 lcores, 2 ports and 2 crypto .. code-block:: console - $ ./build/l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_aesni_mb0" \ + $ ./<build_dir>/examples/dpdk-l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_aesni_mb0" \ --vdev "crypto_aesni_mb1" -- -p 0x3 --chain CIPHER_HASH \ --cipher_op ENCRYPT --cipher_algo aes-cbc \ --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f \
doc/guides/sample_app_ug/l2_forward_event.rst +5 -5
@@ -52,7 +52,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/l2fwd-event [EAL options] -- -p PORTMASK [-q NQ] --[no-]mac-updating --mode=MODE --eventq-sched=SCHED_MODE + ./<build_dir>/examples/dpdk-l2fwd-event [EAL options] -- -p PORTMASK [-q NQ] --[no-]mac-updating --mode=MODE --eventq-sched=SCHED_MODE where,
@@ -75,20 +75,20 @@ issue the command: .. code-block:: console - ./build/l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=poll + ./<build_dir>/examples/dpdk-l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=poll Eventdev mode with 4 lcores, 16 ports , sched method ordered and MAC address updating enabled, issue the command: .. code-block:: console - ./build/l2fwd-event -l 0-3 -n 4 -- -p ffff --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l2fwd-event -l 0-3 -n 4 -- -p ffff --eventq-sched=ordered or .. code-block:: console - ./build/l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l2fwd-event -l 0-3 -n 4 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
@@ -105,7 +105,7 @@ scheduler. Following is the sample command: .. code-block:: console - ./build/l2fwd-event -l 0-7 -s 0-3 -n 4 --vdev event_sw0 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l2fwd-event -l 0-7 -s 0-3 -n 4 --vdev event_sw0 -- -q 8 -p ffff --mode=eventdev --eventq-sched=ordered Explanation -----------
doc/guides/sample_app_ug/l2_forward_job_stats.rst +2 -2
@@ -81,7 +81,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/l2fwd-jobstats [EAL options] -- -p PORTMASK [-q NQ] [-l] + ./<build_dir>/examples/dpdk-l2fwd-jobstats [EAL options] -- -p PORTMASK [-q NQ] [-l] where,
@@ -96,7 +96,7 @@ thousands separator printing, issue the command: .. code-block:: console - $ ./build/l2fwd-jobstats -l 0-3 -n 4 -- -q 8 -p ffff -l + $ ./<build_dir>/examples/dpdk-l2fwd-jobstats -l 0-3 -n 4 -- -q 8 -p ffff -l Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/l2_forward_real_virtual.rst +3 -3
@@ -91,7 +91,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/l2fwd [EAL options] -- -p PORTMASK + ./<build_dir>/examples/dpdk-l2fwd [EAL options] -- -p PORTMASK [-q NQ] --[no-]mac-updating [--portmap="(port, port)[,(port, port)]"]
@@ -111,7 +111,7 @@ updating enabled, issue the command: .. code-block:: console - $ ./build/l2fwd -l 0-3 -n 4 -- -q 8 -p ffff + $ ./<build_dir>/examples/dpdk-l2fwd -l 0-3 -n 4 -- -q 8 -p ffff To run the application in linux environment with 4 lcores, 4 ports, 8 RX queues per lcore, to forward RX traffic of ports 0 & 1 on ports 2 & 3 respectively and
@@ -119,7 +119,7 @@ vice versa, issue the command: .. code-block:: console - $ ./build/l2fwd -l 0-3 -n 4 -- -q 8 -p f --portmap="(0,2)(1,3)" + $ ./<build_dir>/examples/dpdk-l2fwd -l 0-3 -n 4 -- -q 8 -p f --portmap="(0,2)(1,3)" Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/l3_forward.rst +5 -5
@@ -51,7 +51,7 @@ Running the Application The application has a number of command line options:: - ./l3fwd [EAL options] -- -p PORTMASK + ./dpdk-l3fwd [EAL options] -- -p PORTMASK [-P] [-E] [-L]
@@ -111,7 +111,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s .. code-block:: console - ./build/l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" + ./<build_dir>/examples/dpdk-l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" In this command:
@@ -138,13 +138,13 @@ Following is the sample command: .. code-block:: console - ./build/l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x3 --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x3 --eventq-sched=ordered or .. code-block:: console - ./build/l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x03 --mode=eventdev --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l3fwd -l 0-3 -n 4 -w <event device> -- -p 0x03 --mode=eventdev --eventq-sched=ordered In this command:
@@ -166,7 +166,7 @@ scheduler. Following is the sample command: .. code-block:: console - ./build/l3fwd -l 0-7 -s 0xf0000 -n 4 --vdev event_sw0 -- -p 0x3 --mode=eventdev --eventq-sched=ordered + ./<build_dir>/examples/dpdk-l3fwd -l 0-7 -s 0xf0000 -n 4 --vdev event_sw0 -- -p 0x3 --mode=eventdev --eventq-sched=ordered In case of eventdev mode, *--config* option is not used for ethernet port configuration. Instead each ethernet port will be configured with mentioned
doc/guides/sample_app_ug/l3_forward_access_ctrl.rst +3 -3
@@ -184,7 +184,7 @@ Packet 2 matches Rule 2 and is forwarded to port 1. Packet 3 matches Rule 3 and is forwarded to port 0. For more details on the rule file format, -please refer to rule_ipv4.db and rule_ipv6.db files (inside <RTE_SDK>/examples/l3fwd-acl/). +please refer to rule_ipv4.db and rule_ipv6.db files (inside dpdk/examples/l3fwd-acl/). Application Phases ~~~~~~~~~~~~~~~~~~
@@ -236,7 +236,7 @@ The application has a number of command line options: .. code-block:: console - ./build/l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] + ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] where,
@@ -268,7 +268,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s .. code-block:: console - ./build/l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --scalar + ./<build_dir>/examples/dpdk-l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --scalar In this command:
doc/guides/sample_app_ug/l3_forward_graph.rst +2 -2
@@ -44,7 +44,7 @@ Running the Application The application has a number of command line options similar to l3fwd:: - ./l3fwd-graph [EAL options] -- -p PORTMASK + ./dpdk-l3fwd-graph [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
@@ -79,7 +79,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s .. code-block:: console - ./build/l3fwd-graph -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" + ./<build_dir>/examples/dpdk-l3fwd-graph -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" In this command:
doc/guides/sample_app_ug/l3_forward_power_man.rst +5 -9
@@ -88,7 +88,7 @@ The application has a number of command line options: .. code-block:: console - ./build/l3fwd_power [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] + ./<build_dir>/examples/dpdk-l3fwd_power [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] where,
@@ -378,7 +378,7 @@ See :doc:`Power Management<../prog_guide/power_man>` chapter in the DPDK Program .. code-block:: console - ./l3fwd-power -l xxx -n 4 -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3 -P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1 + ./<build_dir>/examples/dpdk-l3fwd-power -l xxx -n 4 -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3 -P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1 Where,
@@ -407,7 +407,7 @@ app with the training flag set to “1”, and the other parameters set to .. code-block:: console - ./examples/l3fwd-power/build/l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "1,0,0" –P + ./<build_dir>/examples/dpdk-l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "1,0,0" –P This will run the training algorithm for x seconds on each core (cores 2 and 3), and then print out the recommended threshold values for those
@@ -432,7 +432,7 @@ then be started without the training mode so traffic can start immediately. .. code-block:: console - ./examples/l3fwd-power/build/l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "0,340000,540000" –P + ./<build_dir>/examples/dpdk-l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "0,340000,540000" –P Telemetry Mode --------------
@@ -449,13 +449,9 @@ cycles it took is measured and compared with minimum and maximum reference cycles and accordingly busy rate is set to either 0% or 50% or 100%. - .. Note:: - - * The CONFIG_RTE_LIBRTE_TELEMETRY should be set in order to get the stats in DPDK telemetry. - .. code-block:: console - ./examples/l3fwd-power/build/l3fwd-power --telemetry -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --telemetry + ./<build_dir>/examples/dpdk-l3fwd-power --telemetry -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --telemetry The new stats ``empty_poll`` , ``full_poll`` and ``busy_percent`` can be viewed by running the script ``/usertools/dpdk-telemetry-client.py`` and selecting the menu option ``Send for global Metrics``.
doc/guides/sample_app_ug/link_status_intr.rst +2 -2
@@ -39,7 +39,7 @@ The application requires a number of command line options: .. code-block:: console - ./build/link_status_interrupt [EAL options] -- -p PORTMASK [-q NQ][-T PERIOD] + ./<build_dir>/examples/dpdk-link_status_interrupt [EAL options] -- -p PORTMASK [-q NQ][-T PERIOD] where,
@@ -54,7 +54,7 @@ issue the command: .. code-block:: console - $ ./build/link_status_interrupt -l 0-3 -n 4-- -q 8 -p ffff + $ ./<build_dir>/examples/dpdk-link_status_interrupt -l 0-3 -n 4-- -q 8 -p ffff Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/multi_process.rst +10 -10
@@ -41,7 +41,7 @@ passing at least two cores in the coremask/corelist, as follows: .. code-block:: console - ./build/simple_mp -l 0-1 -n 4 --proc-type=primary + ./<build_dir>/examples/dpdk-simple_mp -l 0-1 -n 4 --proc-type=primary For the first DPDK process run, the proc-type flag can be omitted or set to auto, since all DPDK processes will default to being a primary instance,
@@ -50,7 +50,7 @@ The process should start successfully and display a command prompt as follows: .. code-block:: console - $ ./build/simple_mp -l 0-1 -n 4 --proc-type=primary + $ ./<build_dir>/examples/dpdk-simple_mp -l 0-1 -n 4 --proc-type=primary EAL: coremask set to 3 EAL: Detected lcore 0 on socket 0 EAL: Detected lcore 1 on socket 0
@@ -76,7 +76,7 @@ again run the same binary setting at least two cores in the coremask/corelist: .. code-block:: console - ./build/simple_mp -l 2-3 -n 4 --proc-type=secondary + ./<build_dir>/examples/dpdk-simple_mp -l 2-3 -n 4 --proc-type=secondary When running a secondary process such as that shown above, the proc-type parameter can again be specified as auto. However, omitting the parameter altogether will cause the process to try and start as a primary rather than secondary process.
@@ -182,10 +182,10 @@ the following commands can be used (assuming run as root): .. code-block:: console - # ./build/symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0 - # ./build/symmetric_mp -l 2 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1 - # ./build/symmetric_mp -l 3 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2 - # ./build/symmetric_mp -l 4 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3 + # ./<build_dir>/examples/dpdk-symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0 + # ./<build_dir>/examples/dpdk-symmetric_mp -l 2 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1 + # ./<build_dir>/examples/dpdk-symmetric_mp -l 3 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2 + # ./<build_dir>/examples/dpdk-symmetric_mp -l 4 -n 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3 .. note::
@@ -282,9 +282,9 @@ the following commands could be used: .. code-block:: console - # ./mp_server/build/mp_server -l 1-2 -n 4 -- -p 3 -n 2 - # ./mp_client/build/mp_client -l 3 -n 4 --proc-type=auto -- -n 0 - # ./mp_client/build/mp_client -l 4 -n 4 --proc-type=auto -- -n 1 + # ./<build_dir>/examples/dpdk-mp_server -l 1-2 -n 4 -- -p 3 -n 2 + # ./<build_dir>/examples/dpdk-mp_client -l 3 -n 4 --proc-type=auto -- -n 0 + # ./<build_dir>/examples/dpdk-mp_client -l 4 -n 4 --proc-type=auto -- -n 1 .. note::
doc/guides/sample_app_ug/ntb.rst +1 -1
@@ -32,7 +32,7 @@ The only available options are the standard ones for the EAL: .. code-block:: console - ./build/ntb_fwd -c 0xf -n 6 -- -i + ./<build_dir>/examples/dpdk-ntb -c 0xf -n 6 -- -i Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL)
doc/guides/sample_app_ug/packet_ordering.rst +2 -1
@@ -43,7 +43,8 @@ The application execution command line is: .. code-block:: console - ./packet_ordering [EAL options] -- -p PORTMASK [--disable-reorder] [--insight-worker] + ./<build_dir>/examples/dpdk-packet_ordering [EAL options] -- -p PORTMASK / + [--disable-reorder] [--insight-worker] The -c EAL CPU_COREMASK option has to contain at least 3 CPU cores. The first CPU core in the core mask is the master core and would be assigned to
doc/guides/sample_app_ug/performance_thread.rst +13 -31
121 lines not on this page · raw message
doc/guides/sample_app_ug/ptpclient.rst +1 -8
@@ -57,13 +57,6 @@ To compile the sample application see :doc:`compiling`. The application is located in the ``ptpclient`` sub-directory. -.. note:: - To compile the application edit the ``config/common_linux`` configuration file to enable IEEE1588 - and then recompile DPDK: - - .. code-block:: console - - CONFIG_RTE_LIBRTE_IEEE1588=y Running the Application -----------------------
@@ -72,7 +65,7 @@ To run the example in a ``linux`` environment: .. code-block:: console - ./build/ptpclient -l 1 -n 4 -- -p 0x1 -T 0 + ./<build_dir>/examples/dpdk-ptpclient -l 1 -n 4 -- -p 0x1 -T 0 Refer to *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/qos_metering.rst +1 -1
@@ -48,7 +48,7 @@ The application execution command line is as below: .. code-block:: console - ./qos_meter [EAL options] -- -p PORTMASK + ./dpdk-qos_meter [EAL options] -- -p PORTMASK The application is constrained to use a single core in the EAL core mask and 2 ports only in the application port mask (first port from the port mask is used for RX and the other port in the core mask is used for TX).
doc/guides/sample_app_ug/qos_scheduler.rst +5 -5
@@ -42,8 +42,8 @@ The application is located in the ``qos_sched`` sub-directory. .. note:: To get statistics on the sample app using the command line interface as described in the next section, - DPDK must be compiled defining *CONFIG_RTE_SCHED_COLLECT_STATS*, - which can be done by changing the configuration file for the specific target to be compiled. + DPDK must be compiled defining *RTE_SCHED_COLLECT_STATS*, which can be done by changing the relevant + entry in the ``config/rte_config.h`` file. Running the Application -----------------------
@@ -57,7 +57,7 @@ The application has a number of command line options: .. code-block:: console - ./qos_sched [EAL options] -- <APP PARAMS> + ./<build_dir>/examples/dpdk-qos_sched [EAL options] -- <APP PARAMS> Mandatory application parameters include:
@@ -315,7 +315,7 @@ The following is an example command with a single packet flow configuration: .. code-block:: console - ./qos_sched -l 1,5,7 -n 4 -- --pfc "3,2,5,7" --cfg ./profile.cfg + ./<build_dir>/examples/dpdk-qos_sched -l 1,5,7 -n 4 -- --pfc "3,2,5,7" --cfg ./profile.cfg This example uses a single packet flow configuration which creates one RX thread on lcore 5 reading from port 3 and a worker thread on lcore 7 writing to port 2.
@@ -324,7 +324,7 @@ Another example with 2 packet flow configurations using different ports but shar .. code-block:: console - ./qos_sched -l 1,2,6,7 -n 4 -- --pfc "3,2,2,6,7" --pfc "1,0,2,6,7" --cfg ./profile.cfg + ./<build_dir>/examples/dpdk-qos_sched -l 1,2,6,7 -n 4 -- --pfc "3,2,2,6,7" --pfc "1,0,2,6,7" --cfg ./profile.cfg Note that independent cores for the packet flow configurations for each of the RX, WT and TX thread are also supported, providing flexibility to balance the work.
doc/guides/sample_app_ug/rxtx_callbacks.rst +1 -8
@@ -25,13 +25,6 @@ To compile the sample application see :doc:`compiling`. The application is located in the ``rxtx_callbacks`` sub-directory. -The callbacks feature requires that the ``CONFIG_RTE_ETHDEV_RXTX_CALLBACKS`` -setting is on in the ``config/common_`` config file that applies to the -target. This is generally on by default: - -.. code-block:: console - - CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y Running the Application -----------------------
@@ -40,7 +33,7 @@ To run the example in a ``linux`` environment: .. code-block:: console - ./build/rxtx_callbacks -l 1 -n 4 -- [-t] + ./<build_dir>/examples/dpdk-rxtx_callbacks -l 1 -n 4 -- [-t] Use -t to enable hardware timestamping. If not supported by the NIC, an error will be displayed.
doc/guides/sample_app_ug/server_node_efd.rst +1 -1
@@ -93,7 +93,7 @@ and the back-end node. The frontend server (server) has the following command line options:: - ./server [EAL options] -- -p PORTMASK -n NUM_NODES -f NUM_FLOWS + ./<build_dir>/examples/dpdk-server [EAL options] -- -p PORTMASK -n NUM_NODES -f NUM_FLOWS Where,
doc/guides/sample_app_ug/service_cores.rst +3 -20
@@ -20,26 +20,9 @@ is application specific, and not a part of the service cores API. Compiling the Application ------------------------- -#. Go to the example directory: +To compile the sample application see :doc:`compiling`. - .. code-block:: console - - export RTE_SDK=/path/to/rte_sdk - cd ${RTE_SDK}/examples/service_cores - -#. Set the target (a default target is used if not specified). For example: - - .. code-block:: console - - export RTE_TARGET=x86_64-native-linux-gcc - - See the *DPDK Getting Started* Guide for possible RTE_TARGET values. - -#. Build the application: - - .. code-block:: console - - make +The application is located in the ``service_cores`` sub-directory. Running the Application -----------------------
@@ -50,7 +33,7 @@ pass a service core-mask as an EAL argument at startup time. .. code-block:: console - $ ./build/service_cores + $ ./<build_dir>/examples/dpdk-service_cores Explanation
doc/guides/sample_app_ug/skeleton.rst +1 -1
@@ -25,7 +25,7 @@ To run the example in a ``linux`` environment: .. code-block:: console - ./build/basicfwd -l 1 -n 4 + ./<build_dir>/examples/dpdk-skeleton -l 1 -n 4 Refer to *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/tep_termination.rst +12 -31
97 lines not on this page · raw message
doc/guides/sample_app_ug/test_pipeline.rst +2 -2
@@ -32,7 +32,7 @@ Compiling the Application ------------------------- To compile the sample application see :doc:`compiling` -The application is located in the ``$RTE_SDK/app/test-pipeline`` directory. +The application is located in the ``dpdk/<build_dir>/app`` directory. Running the Application
@@ -45,7 +45,7 @@ The application execution command line is: .. code-block:: console - ./test-pipeline [EAL options] -- -p PORTMASK --TABLE_TYPE + ./dpdk-test-pipeline [EAL options] -- -p PORTMASK --TABLE_TYPE The -c or -l EAL CPU coremask/corelist option has to contain exactly 3 CPU cores. The first CPU core in the core mask is assigned for core A, the second for core B and the third for core C.
doc/guides/sample_app_ug/timer.rst +1 -1
@@ -21,7 +21,7 @@ To run the example in linux environment: .. code-block:: console - $ ./build/timer -l 0-3 -n 4 + $ ./<build_dir>/examples/dpdk-timer -l 0-3 -n 4 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/vdpa.rst +2 -2
@@ -29,7 +29,7 @@ Start the vdpa example .. code-block:: console - ./vdpa [EAL options] -- [--client] [--interactive|-i] or [--iface SOCKET_PATH] + ./dpdk-vdpa [EAL options] -- [--client] [--interactive|-i] or [--iface SOCKET_PATH] where
@@ -51,7 +51,7 @@ Take IFCVF driver for example: .. code-block:: console - ./vdpa -c 0x2 -n 4 --socket-mem 1024,1024 \ + ./dpdk-vdpa -c 0x2 -n 4 --socket-mem 1024,1024 \ -w 0000:06:00.3,vdpa=1 -w 0000:06:00.4,vdpa=1 \ -- --interactive
doc/guides/sample_app_ug/vhost.rst +3 -8
@@ -38,7 +38,7 @@ Start the vswitch example .. code-block:: console - ./vhost-switch -l 0-3 -n 4 --socket-mem 1024 \ + ./dpdk-vhost-switch -l 0-3 -n 4 --socket-mem 1024 \ -- --socket-file /tmp/sock0 --client \ ...
@@ -78,13 +78,13 @@ could be done by: .. code-block:: console modprobe uio_pci_generic - $RTE_SDK/usertools/dpdk-devbind.py -b uio_pci_generic 0000:00:04.0 + dpdk/usertools/dpdk-devbind.py -b uio_pci_generic 0000:00:04.0 Then start testpmd for packet forwarding testing. .. code-block:: console - ./x86_64-native-gcc/app/testpmd -l 0-1 -- -i + ./<build_dir>/app/dpdk-testpmd -l 0-1 -- -i > start tx_first Inject packets
@@ -192,11 +192,6 @@ Common Issues max queue number is larger than 128, device start will fail due to insufficient mbuf. - Change the default number to make it work as below, just set the number - according to the NIC's property. :: - - make EXTRA_CFLAGS="-DMAX_QUEUES=320" - * Option "builtin-net-driver" is incompatible with QEMU QEMU vhost net device start will fail if protocol feature is not negotiated.
doc/guides/sample_app_ug/vhost_blk.rst +1 -1
@@ -36,7 +36,7 @@ Start the vhost_blk example .. code-block:: console - ./vhost_blk -m 1024 + ./dpdk-vhost_blk -m 1024 .. _vhost_blk_app_run_vm:
doc/guides/sample_app_ug/vhost_crypto.rst +1 -1
@@ -28,7 +28,7 @@ Start the vhost_crypto example .. code-block:: console - ./vhost_crypto [EAL options] -- + ./dpdk-vhost_crypto [EAL options] -- --config (lcore,cdev-id,queue-id)[,(lcore,cdev-id,queue-id)] --socket-file lcore,PATH [--zero-copy]
doc/guides/sample_app_ug/vm_power_management.rst +14 -20
@@ -245,26 +245,23 @@ To build just the ``vm_power_manager`` application using ``make``: .. code-block:: console - export RTE_SDK=/path/to/rte_sdk - export RTE_TARGET=build - cd ${RTE_SDK}/examples/vm_power_manager/ + cd dpdk/examples/vm_power_manager/ make -The resulting binary is ``${RTE_SDK}/build/examples/vm_power_manager``. +The resulting binary is ``dpdk/build/examples/vm_power_manager``. To build just the ``vm_power_manager`` application using ``meson``/``ninja``: .. code-block:: console - export RTE_SDK=/path/to/rte_sdk - cd ${RTE_SDK} + cd dpdk meson build cd build ninja meson configure -Dexamples=vm_power_manager ninja -The resulting binary is ``${RTE_SDK}/build/examples/dpdk-vm_power_manager``. +The resulting binary is ``dpdk/build/examples/dpdk-vm_power_manager``. Running the Host Application ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -274,7 +271,7 @@ than the EAL options: .. code-block:: console - ./build/vm_power_mgr [EAL options] + ./<build_dir>/examples/dpdk-vm_power_mgr [EAL options] The application requires exactly two cores to run. One core for the CLI and the other for the channel endpoint monitor. For example, to run on
@@ -282,7 +279,7 @@ cores 0 and 1 on a system with four memory channels, issue the command: .. code-block:: console - ./build/vm_power_mgr -l 0-1 -n 4 + ./<build_dir>/examples/dpdk-vm_power_mgr -l 0-1 -n 4 After successful initialization, the VM Power Manager CLI prompt appears:
@@ -462,12 +459,10 @@ the following commands: .. code-block:: console - export RTE_SDK=/path/to/rte_sdk - export RTE_TARGET=build - cd ${RTE_SDK}/examples/vm_power_manager/guest_cli/ + cd dpdk/examples/vm_power_manager/guest_cli/ make -The resulting binary is ``${RTE_SDK}/build/examples/guest_cli``. +The resulting binary is ``dpdk/build/examples/guest_cli``. **Note**: This sample application conditionally links in the Jansson JSON library. Consequently, if you are using a multilib or cross-compile
@@ -498,15 +493,14 @@ To build just the ``vm_power_manager`` application using ``meson``/``ninja``: .. code-block:: console - export RTE_SDK=/path/to/rte_sdk - cd ${RTE_SDK} + cd dpdk meson build cd build ninja meson configure -Dexamples=vm_power_manager/guest_cli ninja -The resulting binary is ``${RTE_SDK}/build/examples/guest_cli``. +The resulting binary is ``dpdk/build/examples/guest_cli``. Running the Guest Application ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -515,14 +509,14 @@ The standard EAL command line parameters are necessary: .. code-block:: console - ./build/vm_power_mgr [EAL options] -- [guest options] + ./<build_dir>/examples/dpdk-vm_power_mgr [EAL options] -- [guest options] The guest example uses a channel for each lcore enabled. For example, to run on cores 0, 1, 2 and 3: .. code-block:: console - ./build/guest_vm_power_mgr -l 0-3 + ./<build_dir>/examples/dpdk-guest_vm_power_mgr -l 0-3 .. _sending_policy:
@@ -593,7 +587,7 @@ host, use a command like the following: .. code-block:: console - ./build/guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4 + ./<build_dir>/examples/dpdk-guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4 Once the VM Power Manager Guest CLI appears, issuing the 'send_policy now' command will send the policy to the host:
@@ -707,7 +701,7 @@ To start the application and configure the power policy, and send it to the host .. code-block:: console - ./build/guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4 + ./<build_dir>/examples/dpdk-guest_vm_power_mgr -l 0-3 -n 4 -- --vm-name=ubuntu --policy=BRANCH_RATIO --vcpu-list=2-4 Once the VM Power Manager Guest CLI appears, issuing the 'send_policy now' command will send the policy to the host:
doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst +4 -4
@@ -26,13 +26,13 @@ multiple queues. When run with 8 threads, that is, with the -c FF option, each t As supplied, the sample application configures the VMDQ feature to have 32 pools with 4 queues each as indicated in :numref:`figure_vmdq_dcb_example`. The Intel® 82599 10 Gigabit Ethernet Controller NIC also supports the splitting of traffic into 16 pools of 8 queues. While the Intel® X710 or XL710 Ethernet Controller NICs support many configurations of VMDQ pools of 4 or 8 queues each. For simplicity, only 16 -or 32 pools is supported in this sample. And queues numbers for each VMDQ pool can be changed by setting CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM -in config/common_* file. +or 32 pools is supported in this sample. And queues numbers for each VMDQ pool can be changed by setting RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM +in config/rte_config.h file. The nb-pools, nb-tcs and enable-rss parameters can be passed on the command line, after the EAL parameters: .. code-block:: console - ./build/vmdq_dcb [EAL options] -- -p PORTMASK --nb-pools NP --nb-tcs TC --enable-rss + ./<build_dir>/examples/dpdk-vmdq_dcb [EAL options] -- -p PORTMASK --nb-pools NP --nb-tcs TC --enable-rss where, NP can be 16 or 32, TC can be 4 or 8, rss is disabled by default.
@@ -72,7 +72,7 @@ To run the example in a linux environment: .. code-block:: console - user@target:~$ ./build/vmdq_dcb -l 0-3 -n 4 -- -p 0x3 --nb-pools 32 --nb-tcs 4 + user@target:~$ ./<build_dir>/examples/dpdk-vmdq_dcb -l 0-3 -n 4 -- -p 0x3 --nb-pools 32 --nb-tcs 4 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/sample_app_ug/vmdq_forwarding.rst +4 -4
@@ -24,13 +24,13 @@ multiple queues. When run with 8 threads, that is, with the -c FF option, each t As supplied, the sample application configures the VMDq feature to have 32 pools with 4 queues each. The Intel® 82599 10 Gigabit Ethernet Controller NIC also supports the splitting of traffic into 16 pools of 2 queues. While the Intel® X710 or XL710 Ethernet Controller NICs support many configurations of VMDq pools of 4 or 8 queues each. -And queues numbers for each VMDq pool can be changed by setting CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM -in config/common_* file. +And queues numbers for each VMDq pool can be changed by setting RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM +in config/rte_config.h file. The nb-pools and enable-rss parameters can be passed on the command line, after the EAL parameters: .. code-block:: console - ./build/vmdq_app [EAL options] -- -p PORTMASK --nb-pools NP --enable-rss + ./<build_dir>/examples/dpdk-vmdq [EAL options] -- -p PORTMASK --nb-pools NP --enable-rss where, NP can be 8, 16 or 32, rss is disabled by default.
@@ -56,7 +56,7 @@ To run the example in a Linux environment: .. code-block:: console - user@target:~$ ./build/vmdq_app -l 0-3 -n 4 -- -p 0x3 --nb-pools 16 + user@target:~$ ./<build_dir>/examples/dpdk-vmdq -l 0-3 -n 4 -- -p 0x3 --nb-pools 16 Refer to the *DPDK Getting Started Guide* for general information on running applications and the Environment Abstraction Layer (EAL) options.
doc/guides/testpmd_app_ug/run_app.rst +3 -3
@@ -20,7 +20,7 @@ They must be separated from the EAL options, shown in the previous section, with .. code-block:: console - sudo ./testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=2 + sudo ./dpdk-testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=2 The command line options are:
@@ -59,13 +59,13 @@ The command line options are: * ``--nb-cores=N`` Set the number of forwarding cores, - where 1 <= N <= "number of cores" or ``CONFIG_RTE_MAX_LCORE`` from the configuration file. + where 1 <= N <= "number of cores" or ``RTE_MAX_LCORE`` from the configuration file. The default value is 1. * ``--nb-ports=N`` Set the number of forwarding ports, - where 1 <= N <= "number of ports" on the board or ``CONFIG_RTE_MAX_ETHPORTS`` from the configuration file. + where 1 <= N <= "number of ports" on the board or ``RTE_MAX_ETHPORTS`` from the configuration file. The default value is the number of ports on the board. * ``--coremask=0xXX``
doc/guides/testpmd_app_ug/testpmd_funcs.rst +2 -7
@@ -71,7 +71,7 @@ practical or possible testpmd supports alternative methods for executing command .. code-block:: console - ./testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt + ./dpdk-testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt Interactive-mode selected CLI commands to be read from /home/ubuntu/flow-create-commands.txt Configuring Port 0 (socket 0)
@@ -336,7 +336,7 @@ The available information categories are: * ``icmpecho``: Receives a burst of packets, lookup for ICMP echo requests and, if any, send back ICMP echo replies. -* ``ieee1588``: Demonstrate L2 IEEE1588 V2 PTP timestamping for RX and TX. Requires ``CONFIG_RTE_LIBRTE_IEEE1588=y``. +* ``ieee1588``: Demonstrate L2 IEEE1588 V2 PTP timestamping for RX and TX. * ``noisy``: Noisy neighbor simulation. Simulate more realistic behavior of a guest machine engaged in receiving
@@ -386,11 +386,6 @@ Example for the io forwarding engine, with some packet drops on the tx side:: TX-packets: 548595568 TX-dropped: 128 TX-total: 548595696 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -.. note:: - - Enabling CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES appends "CPU cycles/packet" stats, like: - - CPU cycles/packet=xx.dd (total cycles=xxxx / total RX packets=xxxx) at xxx MHz clock clear fwd ~~~~~~~~~
Signature · 1 line
2.22.0
Re: [dpdk-dev] [PATCH v6 10/14] doc: remove references to make from app guides
Quoted 9 lines · Ciara Power
While make has been deprecated for DPDK, it's still applicable for some example apps to be built standalone, this patch adjusts the guides to take that into consideration.
Signed-off-by Ciara Power <[email protected]>Acked-by Nicolas Chautru <[email protected]>---
v6: Modified commit log based on suggestions on v5.
For kernel_nic_interface.rst,
PATCH v6 11/14 doc: remove reference to make from tools guides
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
---
v6:
- Fixed indentation for testbbdev list entry.
v5:
- Reworded sentence in pdump doc.
- Replaced references to testbbdev binary with dpdk-test-bbdev.
- Fixed links to linux_gsg doc.
--- doc/guides/tools/comp_perf.rst | 10 ++------ doc/guides/tools/cryptoperf.rst | 20 +++------------- doc/guides/tools/pdump.rst | 15 +++++------- doc/guides/tools/proc_info.rst | 2 +- doc/guides/tools/testbbdev.rst | 38 +++++++++---------------------- doc/guides/tools/testeventdev.rst | 21 ++++++++--------- 6 files changed, 32 insertions(+), 74 deletions(-)
doc/guides/tools/comp_perf.rst +2 -8
@@ -100,13 +100,7 @@ Application Options Compiling the Tool ------------------ -**Step 1: PMD setting** - -The ``dpdk-test-compress-perf`` tool depends on compression device drivers PMD which -can be disabled by default in the build configuration file ``common_base``. -The compression device drivers PMD which should be tested can be enabled by setting e.g.:: - - CONFIG_RTE_LIBRTE_PMD_ISAL=y +See :doc:`../linux_gsg/build_dpdk` for compilation steps. Running the Tool
@@ -116,5 +110,5 @@ The tool has a number of command line options. Here is the sample command line: .. code-block:: console - ./build/app/dpdk-test-compress-perf -l 4 -- --driver-name compress_qat --input-file test.txt --seg-sz 8192 + ./<build_dir>/app/dpdk-test-compress-perf -l 4 -- --driver-name compress_qat --input-file test.txt --seg-sz 8192 --compress-level 1:1:9 --num-iter 10 --extended-input-sz 1048576 --max-num-sgl-segs 16 --huffman-enc fixed
doc/guides/tools/cryptoperf.rst +3 -17
@@ -33,19 +33,8 @@ the hardware accelerator fully loaded and so measure maximum throughput. Compiling the Application ------------------------- -**Step 1: PMD setting** -The ``dpdk-test-crypto-perf`` tool depends on crypto device drivers PMD which -are disabled by default in the build configuration file ``common_base``. -The crypto device drivers PMD which should be tested can be enabled by setting:: - - CONFIG_RTE_LIBRTE_PMD_<name>=y - -Setting example for open ssl PMD:: - - CONFIG_RTE_LIBRTE_PMD_OPENSSL=y - -**Step 2: Linearization setting** +**Step 1: Linearization setting** It is possible linearized input segmented packets just before crypto operation for devices which doesn't support scatter-gather, and allows to measure
@@ -56,13 +45,10 @@ To set on the linearization options add below definition to the #define CPERF_LINEARIZATION_ENABLE -**Step 3: Build the application** +**Step 2: Build the application** -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-crypto-perf`` application. +See :doc:`../linux_gsg/build_dpdk` for compilation steps. -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
doc/guides/tools/pdump.rst +6 -9
@@ -19,12 +19,9 @@ a DPDK secondary process and is capable of enabling packet capture on dpdk ports framework initialization code. Refer ``app/test-pmd/testpmd.c`` code to see how this is done. - * The ``dpdk-pdump`` tool depends on libpcap based PMD which is disabled - by default in the build configuration files, - owing to an external dependency on the libpcap development files - which must be installed on the board. - Once the libpcap development files are installed, the libpcap based PMD - can be enabled by setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK. + * The ``dpdk-pdump`` tool depends on DPDK pcap PMD, so the system should + have libpcap development files installed and the pcap PMD not disabled + in the build. * The ``dpdk-pdump`` tool runs as a DPDK secondary process. It exits when the primary application exits.
@@ -37,7 +34,7 @@ The tool has a number of command line options: .. code-block:: console - ./build/app/dpdk-pdump -- + ./<build_dir>/app/dpdk-pdump -- [--multi] --pdump '(port=<port id> | device_id=<pci id or vdev name>), (queue=<queue_id>),
@@ -120,5 +117,5 @@ Example .. code-block:: console - $ sudo ./build/app/dpdk-pdump -l 3 -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap' - $ sudo ./build/app/dpdk-pdump -l 3,4,5 -- --multi --pdump 'port=0,queue=*,rx-dev=/tmp/rx-1.pcap' --pdump 'port=1,queue=*,rx-dev=/tmp/rx-2.pcap' + $ sudo ./<build_dir>/app/dpdk-pdump -l 3 -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap' + $ sudo ./<build_dir>/app/dpdk-pdump -l 3,4,5 -- --multi --pdump 'port=0,queue=*,rx-dev=/tmp/rx-1.pcap' --pdump 'port=1,queue=*,rx-dev=/tmp/rx-2.pcap'
doc/guides/tools/proc_info.rst +1 -1
@@ -17,7 +17,7 @@ The application has a number of command line options: .. code-block:: console - ./$(RTE_TARGET)/app/dpdk-procinfo -- -m | [-p PORTMASK] [--stats | --xstats | + ./<build_dir>/app/dpdk-procinfo -- -m | [-p PORTMASK] [--stats | --xstats | --stats-reset | --xstats-reset] [ --show-port | --show-tm | --show-crypto | --show-ring[=name] | --show-mempool[=name] | --iter-mempool=name ]
doc/guides/tools/testbbdev.rst +11 -27
@@ -13,25 +13,10 @@ parameters passed to a python running script. Compiling the Application ------------------------- -**Step 1: PMD setting** +**Build the application** -The ``dpdk-test-bbdev`` tool depends on crypto device drivers PMD which -are disabled by default in the build configuration file ``common_base``. -The bbdevice drivers PMD which should be tested can be enabled by setting +See :doc:`../linux_gsg/build_dpdk` for compilation steps. - ``CONFIG_RTE_LIBRTE_PMD_<name>=y`` - -Setting example for (*baseband_turbo_sw*) PMD - - ``CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y`` - -**Step 2: Build the application** - -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-bbdev`` application. - -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
@@ -60,7 +45,7 @@ The following are the command-line options: ``-p TESTAPP_PATH, --testapp_path TESTAPP_PATH`` Indicates the path to the bbdev test app. If not specified path is set based - on *$RTE_SDK* environment variable concatenated with "*/build/app/testbbdev*". + on "../.." concatenated with "*/build/app/dpdk-test-bbdev*". ``-e EAL_PARAMS, --eal_params EAL_PARAMS`` Specifies EAL arguments which are passed to the test app. For more details,
@@ -82,9 +67,8 @@ The following are the command-line options: ``-v TEST_VECTOR [TEST_VECTOR ...], --test_vector TEST_VECTOR [TEST_VECTOR ...]`` Specifies paths to the test vector files. If not specified path is set based - on *$RTE_SDK* environment variable concatenated with - "*/app/test-bbdev/test_vectors/bbdev_null.data*" and indicates default - data file. + on "../.." concatenated with "*/app/test-bbdev/test_vectors/bbdev_null.data*" + and indicates default data file. **Example usage:**
@@ -259,8 +243,8 @@ They are chosen to have a good coverage across sizes and processing parameters while still keeping their number limited as part of sanity regression. -Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled for -x86_64-native-linux-icc target: +Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled and output +to the build directory: ::
@@ -268,16 +252,16 @@ x86_64-native-linux-icc target: |-- test-bbdev |-- test_vectors - |-- x86_64-native-linux-icc + |-- build |-- app - |-- testbbdev + |-- dpdk-test-bbdev All bbdev devices ~~~~~~~~~~~~~~~~~ .. code-block:: console - ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev + ./test-bbdev.py -p ../../build/app/dpdk-test-bbdev -v turbo_dec_default.data It runs all available tests using the test vector filled based on
@@ -291,7 +275,7 @@ baseband turbo_sw device .. code-block:: console - ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev + ./test-bbdev.py -p ../../build/app/dpdk-test-bbdev -e="--vdev=baseband_turbo_sw" -t 120 -c validation -v ./test_vectors/* -n 64 -b 8 32
doc/guides/tools/testeventdev.rst +9 -12
@@ -15,11 +15,8 @@ Compiling the Application **Build the application** -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-eventdev`` application. +See :doc:`../linux_gsg/build_dpdk` for compilation steps. -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
@@ -251,7 +248,7 @@ Example command to run order queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev=event_sw0 -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_sw0 -- \ --test=order_queue --plcores 1 --wlcores 2,3
@@ -314,7 +311,7 @@ Example command to run order ``all types queue`` test: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_octeontx -- \ --test=order_atq --plcores 1 --wlcores 2,3
@@ -414,7 +411,7 @@ Example command to run perf queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \ + sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \ --test=perf_queue --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0 Example command to run perf queue test with ethernet ports:
@@ -428,7 +425,7 @@ Example command to run perf queue test with event timer adapter: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ --wlcores 4 --plcores 12 --test perf_queue --stlist=a \ --prod_type_timerdev --fwd_latency
@@ -514,14 +511,14 @@ Example command to run perf ``all types queue`` test: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_octeontx -- \ --test=perf_atq --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0 Example command to run perf ``all types queue`` test with event timer adapter: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ + sudo <build_dir>/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ --wlcores 4 --plcores 12 --test perf_atq --verbose 20 \ --stlist=a --prod_type_timerdev --fwd_latency
@@ -633,7 +630,7 @@ Example command to run pipeline queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ + sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ --test=pipeline_queue --wlcore=1 --prod_type_ethdev --stlist=a
@@ -725,5 +722,5 @@ Example command to run pipeline queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ + sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ --test=pipeline_atq --wlcore=1 --prod_type_ethdev --stlist=a
Signature · 1 line
2.22.0
Re: [dpdk-dev] [PATCH v6 11/14] doc: remove reference to make from tools guides
09/10/2020 12:21, Ciara Power:
Quoted 29 lines
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
Signed-off-by Ciara Power <[email protected]>Reviewed-by Kevin Laatz <[email protected]>Acked-by Nicolas Chautru <[email protected]>---
v6:
- Fixed indentation for testbbdev list entry.
v5:
- Reworded sentence in pdump doc.
- Replaced references to testbbdev binary with dpdk-test-bbdev.
- Fixed links tolinux_gsgdoc.--- doc/guides/tools/comp_perf.rst | 10 ++------ doc/guides/tools/cryptoperf.rst | 20 +++------------- doc/guides/tools/pdump.rst | 15 +++++------- doc/guides/tools/proc_info.rst | 2 +- doc/guides/tools/testbbdev.rst | 38 +++++++++---------------------- doc/guides/tools/testeventdev.rst | 21 ++++++++--------- 6 files changed, 32 insertions(+), 74 deletions(-)doc/guides/tools/comp_perf.rst +0
-0@@ -100,13 +100,7 @@ Application Options Compiling the Tool
doc/guides/tools/comp_perf.rst Application Options · line 103
Quoted 10 lines
doc/guides/tools/comp_perf.rst +1
-7------------------ -**Step 1: PMD setting** - -The ``dpdk-test-compress-perf`` tool depends on compression device drivers PMD which -can be disabled by default in the build configuration file ``common_base``. -The compression device drivers PMD which should be tested can be enabled by setting e.g.:: - - CONFIG_RTE_LIBRTE_PMD_ISAL=y +See :doc:`../linux_gsg/build_dpdk` for compilation steps.
Funnily there was only one step in this section.
I don't see any benefit of referencing how to compile on Linux everywhere. I think it would be better to just drop the whole section about compilation.
Quoted 1 line
doc/guides/tools/comp_perf.rst +0
-0Running the Tool
[...]
Quoted 29 lines
doc/guides/tools/cryptoperf.rst +2
-13@@ -33,19 +33,8 @@ the hardware accelerator fully loaded and so measure maximum throughput. Compiling the Application ------------------------- -**Step 1: PMD setting** -The ``dpdk-test-crypto-perf`` tool depends on crypto device drivers PMD which -are disabled by default in the build configuration file ``common_base``. -The crypto device drivers PMD which should be tested can be enabled by setting:: - - CONFIG_RTE_LIBRTE_PMD_<name>=y - -Setting example for open ssl PMD:: - - CONFIG_RTE_LIBRTE_PMD_OPENSSL=y - -**Step 2: Linearization setting** +**Step 1: Linearization setting** It is possible linearized input segmented packets just before crypto operation for devices which doesn't support scatter-gather, and allows to measure@@ -56,13 +45,10 @@ To set on the linearization options add below definition to the #define CPERF_LINEARIZATION_ENABLE -**Step 3: Build the application** +**Step 2: Build the application**
doc/guides/tools/cryptoperf.rst To set on the linearization options add below definition to the · line 54
Quoted 10 lines
doc/guides/tools/cryptoperf.rst +1
-4-Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-crypto-perf`` application. +See :doc:`../linux_gsg/build_dpdk` for compilation steps. -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
Same here, I would keep only the "Linearization setting".
Quoted 20 lines
doc/guides/tools/testbbdev.rst +2
-10@@ -13,25 +13,10 @@ parameters passed to a python running script. Compiling the Application ------------------------- -**Step 1: PMD setting** +**Build the application** -The ``dpdk-test-bbdev`` tool depends on crypto device drivers PMD which -are disabled by default in the build configuration file ``common_base``. -The bbdevice drivers PMD which should be tested can be enabled by setting +See :doc:`../linux_gsg/build_dpdk` for compilation steps. - ``CONFIG_RTE_LIBRTE_PMD_<name>=y`` - -Setting example for (*baseband_turbo_sw*) PMD - - ``CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y`` -
doc/guides/tools/testbbdev.rst parameters passed to a python running script. · line 22
Quoted 10 lines
doc/guides/tools/testbbdev.rst +0
-7-**Step 2: Build the application** - -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-bbdev`` application. - -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
Same here, there is no value in repeating these obvious considerations about compilation.
[...]
Quoted 5 lines
doc/guides/tools/testeventdev.rst +0
-0@@ -15,11 +15,8 @@ Compiling the Application **Build the application**
doc/guides/tools/testeventdev.rst Compiling the Application · line 22
Quoted 10 lines
doc/guides/tools/testeventdev.rst +1
-4-Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-eventdev`` application. +See :doc:`../linux_gsg/build_dpdk` for compilation steps. -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide.
Same here
PATCH v6 12/14 doc: remove references to make from contributing guide
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
---
v5:
- Removed reference to test-build.sh used for Make.
- Added point back in for handling specific code, reworded as necessary.
- Added library statistics section, removing only the mention of CONFIG options.
--- doc/guides/contributing/design.rst | 41 ++++++++--------------- doc/guides/contributing/documentation.rst | 31 ++++------------- doc/guides/contributing/patches.rst | 6 ++-- 3 files changed, 23 insertions(+), 55 deletions(-)
doc/guides/contributing/design.rst +14 -27
@@ -21,7 +21,7 @@ A file located in a subdir of "linux" is specific to this execution environment. When absolutely necessary, there are several ways to handle specific code: -* Use a ``#ifdef`` with the CONFIG option in the C code. +* Use a ``#ifdef`` with a build definition macro in the C code. This can be done when the differences are small and they can be embedded in the same C file: .. code-block:: c
@@ -32,30 +32,25 @@ When absolutely necessary, there are several ways to handle specific code: titi(); #endif -* Use the CONFIG option in the Makefile. This is done when the differences are more significant. - In this case, the code is split into two separate files that are architecture or environment specific. - This should only apply inside the EAL library. - -.. note:: - - As in the linux kernel, the ``CONFIG_`` prefix is not used in C code. - This is only needed in Makefiles or shell scripts. +* Use build definition macros and conditions in the Meson build file. This is done when the differences + are more significant. In this case, the code is split into two separate files that are architecture + or environment specific. This should only apply inside the EAL library. Per Architecture Sources ~~~~~~~~~~~~~~~~~~~~~~~~ -The following config options can be used: +The following macro options can be used: -* ``CONFIG_RTE_ARCH`` is a string that contains the name of the architecture. -* ``CONFIG_RTE_ARCH_I686``, ``CONFIG_RTE_ARCH_X86_64``, ``CONFIG_RTE_ARCH_X86_64_32`` or ``CONFIG_RTE_ARCH_PPC_64`` are defined only if we are building for those architectures. +* ``RTE_ARCH`` is a string that contains the name of the architecture. +* ``RTE_ARCH_I686``, ``RTE_ARCH_X86_64``, ``RTE_ARCH_X86_64_32`` or ``RTE_ARCH_PPC_64`` are defined only if we are building for those architectures. Per Execution Environment Sources ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The following config options can be used: +The following macro options can be used: -* ``CONFIG_RTE_EXEC_ENV`` is a string that contains the name of the executive environment. -* ``CONFIG_RTE_EXEC_ENV_FREEBSD`` or ``CONFIG_RTE_EXEC_ENV_LINUX`` are defined only if we are building for this execution environment. +* ``RTE_EXEC_ENV`` is a string that contains the name of the executive environment. +* ``RTE_EXEC_ENV_FREEBSD`` or ``RTE_EXEC_ENV_LINUX`` are defined only if we are building for this execution environment. Mbuf features -------------
@@ -87,22 +82,14 @@ requirements for preventing ABI changes when implementing statistics. Mechanism to allow the application to turn library statistics on and off ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Each library that maintains statistics counters should provide a single build -time flag that decides whether the statistics counter collection is enabled or -not. This flag should be exposed as a variable within the DPDK configuration -file. When this flag is set, all the counters supported by current library are +Having runtime support for enabling/disabling library statistics is recommended, +as build-time options should be avoided. However, if build-time options are used, +for example as in the table library, the options can be set using c_args. +When this flag is set, all the counters supported by current library are collected for all the instances of every object type provided by the library. When this flag is cleared, none of the counters supported by the current library are collected for any instance of any object type provided by the library: -.. code-block:: console - - # DPDK file config/common_linux, config/common_freebsd, etc. - CONFIG_RTE_<LIBRARY_NAME>_STATS_COLLECT=y/n - -The default value for this DPDK configuration file variable (either "yes" or -"no") is decided by each library. - Prevention of ABI changes due to library statistics support ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
doc/guides/contributing/documentation.rst +6 -25
@@ -218,25 +218,14 @@ Build commands ~~~~~~~~~~~~~~ The documentation is built using the standard DPDK build system. -Some examples are shown below: -* Generate all the documentation targets:: +To enable doc building:: - make doc + meson configure -Denable_docs=true -* Generate the Doxygen API documentation in Html:: +See :doc:`../linux_gsg/build_dpdk` for more detail on compiling DPDK with meson. - make doc-api-html - -* Generate the guides documentation in Html:: - - make doc-guides-html - -* Generate the guides documentation in Pdf:: - - make doc-guides-pdf - -The output of these commands is generated in the ``build`` directory:: +The output is generated in the ``build`` directory:: build/doc |-- html
@@ -251,10 +240,6 @@ The output of these commands is generated in the ``build`` directory:: Make sure to fix any Sphinx or Doxygen warnings when adding or updating documentation. -The documentation output files can be removed as follows:: - - make doc-clean - Document Guidelines -------------------
@@ -304,7 +289,7 @@ Line Length Long literal command lines can be shown wrapped with backslashes. For example:: - testpmd -l 2-3 -n 4 \ + dpdk-testpmd -l 2-3 -n 4 \ --vdev=virtio_user0,path=/dev/vhost-net,queues=2,queue_size=1024 \ -- -i --tx-offloads=0x0000002c --enable-lro --txq=2 --rxq=2 \ --txd=1024 --rxd=1024
@@ -456,7 +441,7 @@ Code and Literal block sections For long literal lines that exceed that limit try to wrap the text at sensible locations. For example a long command line could be documented like this and still work if copied directly from the docs:: - build/app/testpmd -l 0-2 -n3 --vdev=net_pcap0,iface=eth0 \ + ./<build_dir>/app/dpdk-testpmd -l 0-2 -n3 --vdev=net_pcap0,iface=eth0 \ --vdev=net_pcap1,iface=eth1 \ -- -i --nb-cores=2 --nb-ports=2 \ --total-num-mbufs=2048
@@ -739,9 +724,5 @@ The following are some guidelines for use of Doxygen in the DPDK API documentati /** Array of physical page addresses for the mempool buffer. */ phys_addr_t elt_pa[MEMPOOL_PG_NUM_DEFAULT]; -* Check for Doxygen warnings in new code by checking the API documentation build:: - - make doc-api-html >/dev/null - * Read the rendered section of the documentation that you have added for correctness, clarity and consistency with the surrounding text.
doc/guides/contributing/patches.rst +3 -3
@@ -486,9 +486,9 @@ By default, ABI compatibility checks are disabled. To enable them, a reference version must be selected via the environment variable ``DPDK_ABI_REF_VERSION``. -The ``devtools/test-build.sh`` and ``devtools/test-meson-builds.sh`` scripts -then build this reference version in a temporary directory and store the -results in a subfolder of the current working directory. +The ``devtools/test-meson-builds.sh`` script then build this reference version +in a temporary directory and store the results in a subfolder of the current +working directory. The environment variable ``DPDK_ABI_REF_DIR`` can be set so that the results go to a different location.
Signature · 1 line
2.22.0
Re: [dpdk-dev] [PATCH v6 12/14] doc: remove references to make from contributing guide
09/10/2020 12:21, Ciara Power:
doc/guides/contributing/design.rst When absolutely necessary, there are several ways to handle specific code: · line 37
Quoted 5 lines
doc/guides/contributing/design.rst +3
-2- As in the linux kernel, the ``CONFIG_`` prefix is not used in C code. - This is only needed in Makefiles or shell scripts. +* Use build definition macros and conditions in the Meson build file. This is done when the differences + are more significant. In this case, the code is split into two separate files that are architecture + or environment specific. This should only apply inside the EAL library.
When writing new sentences, it's better splitting lines after a punctuation, preferably the end of a sentence.
doc/guides/contributing/design.rst When absolutely necessary, there are several ways to handle specific code: · line 45
Quoted 10 lines
Per Architecture Sources
~~~~~~~~~~~~~~~~~~~~~~~~doc/guides/contributing/design.rst +3
-3-The following config options can be used: +The following macro options can be used: -* ``CONFIG_RTE_ARCH`` is a string that contains the name of the architecture. -* ``CONFIG_RTE_ARCH_I686``, ``CONFIG_RTE_ARCH_X86_64``, ``CONFIG_RTE_ARCH_X86_64_32`` or ``CONFIG_RTE_ARCH_PPC_64`` are defined only if we are building for those architectures. +* ``RTE_ARCH`` is a string that contains the name of the architecture. +* ``RTE_ARCH_I686``, ``RTE_ARCH_X86_64``, ``RTE_ARCH_X86_64_32`` or ``RTE_ARCH_PPC_64`` are defined only if we are building for those architectures.
This is out of date. Arm is notably missing.
doc/guides/contributing/design.rst When absolutely necessary, there are several ways to handle specific code: · line 53
Quoted 10 lines
Per Execution Environment Sources
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~doc/guides/contributing/design.rst +3
-3-The following config options can be used: +The following macro options can be used: -* ``CONFIG_RTE_EXEC_ENV`` is a string that contains the name of the executive environment. -* ``CONFIG_RTE_EXEC_ENV_FREEBSD`` or ``CONFIG_RTE_EXEC_ENV_LINUX`` are defined only if we are building for this execution environment. +* ``RTE_EXEC_ENV`` is a string that contains the name of the executive environment. +* ``RTE_EXEC_ENV_FREEBSD`` or ``RTE_EXEC_ENV_LINUX`` are defined only if we are building for this execution environment.
This is out of date. Windows is missing.
[...]
doc/guides/contributing/documentation.rst Build commands · line 224
Quoted 5 lines
doc/guides/contributing/documentation.rst +2
-2-* Generate all the documentation targets:: +To enable doc building:: - make doc + meson configure -Denable_docs=true
No need of this option.
"ninja -C build doc" works even without it.
PATCH v6 13/14 doc: add to release notes to reflect removal of make
In reply to Ciara PowerAdded an entry to describe the removal of the Make build system to the release notes for 20.11.
---
v6:
- Fixed spelling in commit log.
- Fixed formatting of release note entry to be split logically.
--- doc/guides/rel_notes/release_20_11.rst | 4 ++++ 1 file changed, 4 insertions(+)
doc/guides/rel_notes/release_20_11.rst +4 -0
@@ -156,6 +156,10 @@ Removed Items * Removed Python 2 support since it was EOL'd in January 2020. +* build: Support for the Make build system was removed for compiling DPDK, + Meson is now the primary build system. + Sample applications can still be built with Make standalone, using pkg-config. + API Changes -----------
Signature · 1 line
2.22.0
PATCH v6 14/14 doc: update patch cheatsheet to use meson
In reply to Ciara PowerFrom: Kevin Laatz <[email protected]>
With 'make' being removed, the patch cheatsheet needs to be updated to remove any references to 'make'. These references have been replaced with meson alternatives in this patch.
--- .../contributing/img/patch_cheatsheet.svg | 582 ++++++++---------- 1 file changed, 270 insertions(+), 312 deletions(-)
doc/guides/contributing/img/patch_cheatsheet.svg +270 -312
@@ -1,6 +1,4 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> - <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#"
@@ -13,7 +11,7 @@ width="210mm" height="297mm" id="svg2985" - inkscape:version="0.48.4 r9939" + inkscape:version="1.0.1 (3bc2e813f5, 2020-09-07)" sodipodi:docname="patch_cheatsheet.svg"> <sodipodi:namedview pagecolor="#ffffff"
@@ -24,17 +22,19 @@ guidetolerance="10" inkscape:pageopacity="0" inkscape:pageshadow="2" - inkscape:window-width="1184" - inkscape:window-height="1822" + inkscape:window-width="1920" + inkscape:window-height="1017" id="namedview274" showgrid="false" - inkscape:zoom="1.2685914" - inkscape:cx="289.93958" - inkscape:cy="509.84194" - inkscape:window-x="0" - inkscape:window-y="19" - inkscape:window-maximized="0" - inkscape:current-layer="g3272" /> + inkscape:zoom="0.89702958" + inkscape:cx="246.07409" + inkscape:cy="416.76022" + inkscape:window-x="1072" + inkscape:window-y="-8" + inkscape:window-maximized="1" + inkscape:current-layer="layer1" + inkscape:document-rotation="0" + inkscape:snap-grids="false" /> <defs id="defs3"> <linearGradient
@@ -549,347 +549,336 @@ </g> </switch> <g - transform="matrix(0.89980358,0,0,0.89980358,45.57817,-2.8793563)" + transform="matrix(0.89980358,0,0,0.89980358,57.57817,-2.8793563)" id="g4009"> <text x="325.02054" y="107.5126" id="text3212" xml:space="preserve" - style="font-size:43.11383057px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:43.1138px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none" transform="scale(1.193782,0.83767389)"><tspan x="325.02054" y="107.5126" - id="tspan3214">CHEATSHEET</tspan></text> + id="tspan3214" + style="font-family:monospace">CHEATSHEET</tspan></text> <text x="386.51117" y="58.178116" transform="scale(1.0054999,0.99453018)" id="text3212-1" xml:space="preserve" - style="font-size:42.11373901px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:42.1137px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="386.51117" y="58.178116" - id="tspan3214-7">PATCH SUBMIT</tspan></text> + id="tspan3214-7" + style="font-family:monospace">PATCH SUBMIT</tspan></text> </g> <rect - width="714.94495" - height="88.618027" - rx="20.780111" - ry="15.96909" - x="14.574773" - y="7.0045133" + width="759.50977" + height="88.591248" + rx="22.075403" + ry="15.964265" + x="14.588161" + y="7.0179014" id="rect3239" - style="fill:none;stroke:#00233b;stroke-width:0.87678075;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.903557;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <rect - width="713.28113" - height="887.29156" - rx="17.656931" - ry="17.280584" - x="15.406689" - y="104.73515" + width="757.84167" + height="887.2605" + rx="18.760006" + ry="17.27998" + x="15.422211" + y="104.75068" id="rect3239-0" - style="fill:none;stroke:#00233b;stroke-width:1.00973284;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1.04078;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <rect - width="694.94904" - height="381.31" - rx="9.4761629" - ry="9.0904856" - x="24.336016" - y="601.75836" + width="732.82446" + height="381.28253" + rx="9.9926233" + ry="9.0898304" + x="24.349754" + y="601.77209" id="rect3239-0-9-4" - style="fill:none;stroke:#00233b;stroke-width:1.02322531;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1.0507;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <path - d="m 386.3921,327.23442 323.14298,0" + d="M 422.0654,327.23442 H 709.53508" id="path4088" - style="fill:none;stroke:#00233b;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + style="fill:none;stroke:#00233b;stroke-width:0.943189px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" inkscape:connector-curvature="0" /> <text - x="396.18015" + x="428.18015" y="314.45731" id="text4090" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="396.18015" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="428.18015" y="314.45731" id="tspan4092" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Patch Pre-Checks</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Patch Pre-Checks</tspan></text> <text x="43.44949" y="147.32129" id="text4090-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.44949" y="147.32129" id="tspan4092-3" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Commit Pre-Checks</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Commit Pre-Checks</tspan></text> <text - x="397.1235" + x="429.1235" y="144.8549" id="text4090-4-3" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="397.1235" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="429.1235" y="144.8549" id="tspan4092-3-3" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Bugfix?</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Bugfix?</tspan></text> <text x="41.215897" y="634.38617" id="text4090-1" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="41.215897" y="634.38617" id="tspan4092-38" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Git send-email </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Git send-email </tspan></text> <path d="m 31.232443,642.80575 376.113467,0" id="path4088-7" style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" inkscape:connector-curvature="0" /> <rect - width="342.13785" - height="230.74609" - rx="10.411126" - ry="10.411126" - x="25.418407" - y="114.92036" + width="376.65033" + height="230.70007" + rx="11.461329" + ry="10.40905" + x="25.441414" + y="114.94337" id="rect3239-0-9-4-2" - style="fill:none;stroke:#00233b;stroke-width:0.93674862;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.982762;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <text x="43.44949" y="385.8045" id="text4090-86" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.44949" y="385.8045" id="tspan4092-5" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Compile Pre-Checks</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Compile Pre-Checks</tspan></text> <g - transform="translate(352.00486,-348.25973)" + transform="matrix(1.0077634,0,0,1,384.57109,-348.25973)" id="g3295"> <text x="43.87738" y="568.03088" id="text4090-8-14" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.87738" y="568.03088" id="tspan4289" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Include warning/error</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Include warning/error</tspan></text> <text x="43.87738" y="537.71906" id="text4090-8-14-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.87738" y="537.71906" id="tspan4289-1" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Fixes: line</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Fixes: line</tspan></text> <text x="43.87738" y="598.9939" id="text4090-8-14-0" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.87738" y="598.9939" id="tspan4289-2" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ How to reproduce</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ How to reproduce</tspan></text> </g> <g - transform="translate(-2.6258125,-26.708615)" + transform="matrix(0.88614399,0,0,1.0199334,-5.7864591,-38.84504)" id="g4115"> <g id="g3272"> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1" y="454.36987" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7" y="454.36987" x="49.093246">+ build gcc icc clang </tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" + xml:space="preserve" + id="text581" + y="454.36987" + x="49.093246" /> + <text + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2" y="516.59979" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79" y="516.59979" - x="49.093246">+ make test doc </tspan></text> + x="49.093246">+ meson -Denable_docs=true</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2-0-0" y="544.71033" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79-9-0" y="544.71033" - x="49.093246">+ make examples</tspan></text> + x="49.093246">+ meson -Dexamples=all</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2-0-07" y="576.83533" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79-9-3" y="576.83533" - x="49.093246">+ make shared-lib</tspan></text> + x="49.093246" + transform="matrix(1.0305467,0,0,1,-1.5447426,0)">+ meson -Ddefault_library=shared</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2-0-07-4" y="604.88947" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79-9-3-9" y="604.88947" x="49.093246">+ library ABI version</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-2-9" y="486.56659" x="49.093246"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-79-3" y="486.56659" x="49.093246">+ build 32 and 64 bits</tspan></text> </g> </g> <text - x="74.388756" - y="914.65686" + x="72.598656" + y="937.21002" id="text4090-8-1-8-65-9" xml:space="preserve" - style="font-size:19px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12.2959px;line-height:0%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1.02466" + transform="scale(1.0246575,0.97593587)"><tspan sodipodi:role="line" id="tspan3268" - x="74.388756" - y="914.65686">git send-email *.patch --annotate --to <maintainer></tspan><tspan + x="72.598656" + y="937.21002" + style="font-size:19.4685px;line-height:1.25;font-family:monospace;stroke-width:1.02466">git send-email *.patch --annotate --to <maintainer></tspan><tspan sodipodi:role="line" id="tspan3272" - x="74.388756" - y="938.40686"> --cc [email protected] [ --cc [email protected]</tspan><tspan + x="72.598656" + y="961.54565" + style="font-size:19.4685px;line-height:1.25;font-family:monospace;stroke-width:1.02466"> --cc [email protected] [ --cc [email protected]</tspan><tspan sodipodi:role="line" - x="74.388756" - y="962.15686" - id="tspan3266"> --cover-letter -v[N] --in-reply-to <message ID> ]</tspan></text> + x="72.598656" + y="985.88129" + id="tspan3266" + style="font-size:19.4685px;line-height:1.25;font-family:monospace;stroke-width:1.02466"> --cover-letter -v[N] --in-reply-to <message ID> ]</tspan></text> <text x="543.47675" y="1032.3459" id="text4090-8-7-8-7-6-3-8-2-5" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="543.47675" y="1032.3459" id="tspan4092-8-6-3-1-8-4-4-5-3" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">[email protected]</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">[email protected]</tspan></text> <rect - width="678.14105" - height="87.351799" - rx="6.7972355" - ry="6.7972355" - x="31.865864" - y="888.44696" + width="711.56055" + height="87.327599" + rx="7.1322103" + ry="6.795352" + x="31.877964" + y="888.45905" id="rect3239-0-9-4-3" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1.0242;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <text x="543.29498" y="1018.1843" id="text4090-8-7-8-7-6-3-8-2-5-3" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="543.29498" y="1018.1843" id="tspan4092-8-6-3-1-8-4-4-5-3-7" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Suggestions / Updates?</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Suggestions / Updates?</tspan></text> <g id="g3268" transform="translate(0,-6)"> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8" y="704.07019" x="41.658669"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6" y="704.07019" x="41.658669">+ Patch version ( eg: -v2 ) </tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-0" y="736.29175" x="41.658669"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-2" y="736.29175" x="41.658669">+ Patch version annotations</tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-6" y="766.70355" x="41.911205"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-1" y="766.70355" x="41.911205">+ Send --to maintainer </tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-6-3" y="795.30548" x="41.658669"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-1-8" y="795.30548" x="41.658669">+ Send --cc [email protected] </tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-9" y="675.25287" x="41.658669"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-9" y="675.25287" x="41.658669">+ Cover letter</tspan></text>
@@ -897,73 +886,70 @@ id="g3303" transform="translate(1.0962334,-40.034939)"> <text - sodipodi:linespacing="125%" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-65" y="868.70337" x="41.572586"><tspan - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-10" y="868.70337" x="41.572586">+ Send --in-reply-to <message ID><tspan - style="font-size:20px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:20px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan3184" /></tspan></text> <text - sodipodi:linespacing="125%" - style="font-size:25.6917057px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + style="font-style:normal;font-weight:normal;font-size:25.6917px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none" xml:space="preserve" id="text4090-8-1-8-9-1" y="855.79816" x="460.18405"><tspan - style="font-size:11.56126785px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold" + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:11.5613px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" id="tspan4092-8-7-6-9-7" y="855.79816" x="460.18405">****</tspan></text> </g> </g> <text - x="685.67828" + x="697.67828" y="76.55056" id="text4090-8-1-8-9-1-9" xml:space="preserve" - style="font-size:20.20989037px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="685.67828" + style="font-style:normal;font-weight:normal;font-size:20.2099px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="697.67828" y="76.55056" id="tspan4092-8-7-6-9-7-4" - style="font-size:9.09445095px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">v1.0</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:9.09445px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">v2.0</tspan></text> <rect - width="342.3053" - height="155.54948" - rx="9.2344503" - ry="9.2344503" - x="377.58942" - y="114.55766" + width="347.40179" + height="155.50351" + rx="9.3719397" + ry="9.2317209" + x="412.60239" + y="114.58065" id="rect3239-0-9-4-2-1" - style="fill:none;stroke:#00233b;stroke-width:0.76930124;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.774892;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <rect - width="342.12564" - height="236.79482" - rx="10.647112" - ry="9.584527" - x="25.642178" - y="356.86249" + width="377.75555" + height="234.52185" + rx="11.755931" + ry="9.4925261" + x="25.663876" + y="356.88416" id="rect3239-0-9-4-2-0" - style="fill:none;stroke:#00233b;stroke-width:0.9489302;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.99232;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <rect - width="341.98428" - height="312.73181" - rx="8.5358429" - ry="8.5358429" - x="377.96762" - y="280.45331" + width="343.53604" + height="312.67508" + rx="8.5745735" + ry="8.5342941" + x="414.29037" + y="280.48166" id="rect3239-0-9-4-2-1-9" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1.00217;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <path - d="m 387.02742,157.3408 323.14298,0" + d="M 419.35634,157.3408 H 710.1704" id="path4088-8" - style="fill:none;stroke:#00233b;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + style="fill:none;stroke:#00233b;stroke-width:0.94866px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" inkscape:connector-curvature="0" /> <path d="m 36.504486,397.33869 323.142974,0"
@@ -971,9 +957,9 @@ style="fill:none;stroke:#00233b;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" inkscape:connector-curvature="0" /> <path - d="m 35.494337,156.92238 323.142983,0" + d="M 35.494337,156.92238 H 372.01481" id="path4088-4" - style="fill:none;stroke:#00233b;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + style="fill:none;stroke:#00233b;stroke-width:1.02049px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" inkscape:connector-curvature="0" /> <g transform="translate(1.0962334,-30.749225)"
@@ -983,45 +969,41 @@ y="214.1572" id="text4090-8-11" xml:space="preserve" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="214.1572" id="tspan4092-8-52" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Signed-off-by: </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Signed-off-by: </tspan></text> <text x="45.371201" y="243.81795" id="text4090-8-7-8" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="243.81795" id="tspan4092-8-6-3" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Suggested-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Suggested-by:</tspan></text> <text x="45.371201" y="273.90939" id="text4090-8-7-8-7" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="273.90939" id="tspan4092-8-6-3-1" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Reported-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Reported-by:</tspan></text> <text x="45.371201" y="304.00082" id="text4090-8-7-8-7-6" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="304.00082" id="tspan4092-8-6-3-1-8" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Tested-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Tested-by:</tspan></text> <g id="g3297" transform="translate(1.1147904,-7.2461378)">
@@ -1030,110 +1012,102 @@ y="368.8187" id="text4090-8-7-8-7-6-3" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="368.8187" id="tspan4092-8-6-3-1-8-4" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Previous Acks</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Previous Acks</tspan></text> <text x="235.24362" y="360.3028" id="text4090-8-1-8-9-1-4" xml:space="preserve" - style="font-size:25.6917057px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:25.6917px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="235.24362" y="360.3028" id="tspan4092-8-7-6-9-7-0" - style="font-size:11.56126785px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:11.5613px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> </g> <text x="45.371201" y="334.52298" id="text4090-8-7-8-7-6-3-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="45.371201" y="334.52298" id="tspan4092-8-6-3-1-8-4-0" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Commit message</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Commit message</tspan></text> </g> <rect width="295.87207" height="164.50136" rx="7.3848925" ry="4.489974" - x="414.80502" + x="444.80502" y="611.47064" id="rect3239-0-9-4-2-1-9-9" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <text - x="439.4429" + x="469.4429" y="638.35608" id="text4090-1-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="439.4429" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="469.4429" y="638.35608" id="tspan4092-38-8" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Mailing List</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Mailing List</tspan></text> <text - x="431.55353" + x="461.55353" y="675.59857" id="text4090-8-5-6-9-4-6-6-8" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="431.55353" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="461.55353" y="675.59857" id="tspan4092-8-5-5-3-4-0-6-2" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Acked-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Acked-by:</tspan></text> <text - x="431.39734" + x="461.39734" y="734.18231" id="text4090-8-5-6-9-4-6-6-8-5" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="431.39734" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="461.39734" y="734.18231" id="tspan4092-8-5-5-3-4-0-6-2-1" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Reviewed-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Reviewed-by:</tspan></text> <text - x="450.8428" + x="480.8428" y="766.5578" id="text4090-8-5-6-9-4-6-6-8-7" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="450.8428" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="480.8428" y="766.5578" id="tspan4092-8-5-5-3-4-0-6-2-11" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">Nack (refuse patch)</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">Nack (refuse patch)</tspan></text> <path - d="m 426.99385,647.80575 272.72607,0" + d="M 456.99385,647.80575 H 729.71992" id="path4088-7-5" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" + style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" inkscape:connector-curvature="0" /> <path - d="m 424.7332,742.35699 272.72607,0" + d="M 454.7332,742.35699 H 727.45927" id="path4088-7-5-2" - style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" + style="fill:none;stroke:#00233b;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" inkscape:connector-curvature="0" /> <text - x="431.39734" + x="461.39734" y="704.78278" id="text4090-8-5-6-9-4-6-6-8-5-1" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="431.39734" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="461.39734" y="704.78278" id="tspan4092-8-5-5-3-4-0-6-2-1-7" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Tested-by:</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Tested-by:</tspan></text> <g transform="translate(1.0962334,-2.7492248)" id="g3613">
@@ -1142,22 +1116,21 @@ y="1007.5879" id="text4090-8-7-8-7-6-3-8" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="43.146141" y="1007.5879" id="tspan4092-8-6-3-1-8-4-4" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">Previous Acks only when fixing typos, rebased, or checkpatch issues.</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">Previous Acks only when fixing typos, rebased, or checkpatch issues.</tspan></text> <text x="30.942892" y="1011.3757" id="text4090-8-7-8-7-6-3-8-4-1" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="30.942892" y="1011.3757" id="tspan4092-8-6-3-1-8-4-4-55-7" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> </g> <g transform="translate(1.0962334,-2.7492248)"
@@ -1167,35 +1140,34 @@ y="1020.4383" id="text4090-8-7-8-7-6-3-8-4" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="42.176418" y="1020.4383" id="tspan4092-8-6-3-1-8-4-4-55" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">The version.map function names must be in alphabetical order.</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">The version.map function names must be in alphabetical order.</tspan></text> <text x="30.942892" y="1024.2014" id="text4090-8-7-8-7-6-3-8-4-1-5" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="30.942892" y="1024.2014" id="tspan4092-8-6-3-1-8-4-4-55-7-2" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="25.247679" y="1024.2014" id="text4090-8-7-8-7-6-3-8-4-1-5-6" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="25.247679" y="1024.2014" id="tspan4092-8-6-3-1-8-4-4-55-7-2-8" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> </g> <g - transform="translate(1.0962334,-30.749225)" + transform="matrix(1.0211743,0,0,1,25.427515,-30.749225)" id="g3275"> <g id="g3341">
@@ -1204,67 +1176,61 @@ y="390.17807" id="text4090-8" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="390.17807" id="tspan4092-8" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Rebase to git </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Rebase to git </tspan></text> <text x="394.78601" y="420.24835" id="text4090-8-5" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="420.24835" id="tspan4092-8-5" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Checkpatch </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Checkpatch </tspan></text> <text x="394.78601" y="450.53394" id="text4090-8-5-6" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="450.53394" id="tspan4092-8-5-5" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ ABI breakage </tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ ABI breakage </tspan></text> <text x="394.78601" y="513.13031" id="text4090-8-5-6-9-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="513.13031" id="tspan4092-8-5-5-3-4" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Maintainers file</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Maintainers file</tspan></text> <text x="394.78601" y="573.48621" id="text4090-8-5-6-9-4-6" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="573.48621" id="tspan4092-8-5-5-3-4-0" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Release notes</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Release notes</tspan></text> <text x="395.79617" y="603.98718" id="text4090-8-5-6-9-4-6-6" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="395.79617" y="603.98718" id="tspan4092-8-5-5-3-4-0-6" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Documentation</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Documentation</tspan></text> <g transform="translate(0,-0.83470152)" id="g3334">
@@ -1276,24 +1242,22 @@ y="468.01297" id="text4090-8-1-8-9-1-4-1" xml:space="preserve" - style="font-size:25.6917057px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:25.6917px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="660.46729" y="468.01297" id="tspan4092-8-7-6-9-7-0-7" - style="font-size:11.56126785px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">**</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:11.5613px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">**</tspan></text> </g> <text x="394.78601" y="483.59955" id="text4090-8-5-6-9" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="483.59955" id="tspan4092-8-5-5-3" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Update version.map</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Update version.map</tspan></text> </g> <g id="g3428"
@@ -1303,12 +1267,11 @@ y="541.38928" id="text4090-8-5-6-9-4-6-1" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="394.78601" y="541.38928" id="tspan4092-8-5-5-3-4-0-7" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+ Doxygen</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+ Doxygen</tspan></text> <g transform="translate(-119.92979,57.949844)" id="g3267-9">
@@ -1317,28 +1280,26 @@ y="473.13675" id="text4090-8-1-8-9-1-4-1-4" xml:space="preserve" - style="font-size:25.6917057px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-weight:normal;font-size:25.6917px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan x="628.93628" y="473.13675" id="tspan4092-8-7-6-9-7-0-7-8" - style="font-size:11.56126785px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">***</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:11.5613px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">***</tspan></text> </g> </g> </g> </g> <text - x="840.1828" - y="234.34692" - transform="matrix(0.70710678,0.70710678,-0.70710678,0.70710678,0,0)" + x="861.39557" + y="213.1337" + transform="rotate(45)" id="text4090-8-5-6-9-4-6-6-8-7-4" xml:space="preserve" - style="font-size:40px;font-style:normal;font-weight:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" - sodipodi:linespacing="125%"><tspan - x="840.1828" - y="234.34692" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none"><tspan + x="861.39557" + y="213.1337" id="tspan4092-8-5-5-3-4-0-6-2-11-0" - style="font-size:21px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">+</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:21px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">+</tspan></text> <g transform="translate(1.0962334,-2.7492248)" id="g3595">
@@ -1347,42 +1308,41 @@ y="1037.0271" id="text4090-8-7-8-7-6-3-8-4-1-2" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="30.942892" y="1037.0271" id="tspan4092-8-6-3-1-8-4-4-55-7-3" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="25.247679" y="1037.0271" id="text4090-8-7-8-7-6-3-8-4-1-2-5" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="25.247679" y="1037.0271" id="tspan4092-8-6-3-1-8-4-4-55-7-3-7" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="19.552465" y="1037.0271" id="text4090-8-7-8-7-6-3-8-4-1-2-7" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="19.552465" y="1037.0271" id="tspan4092-8-6-3-1-8-4-4-55-7-3-9" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="42.830166" y="1033.2393" id="text4090-8-7-8-7-6-3-8-4-8" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="42.830166" y="1033.2393" id="tspan4092-8-6-3-1-8-4-4-55-2" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">New header files must get a new page in the API docs.</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">New header files must get a new page in the API docs.</tspan></text> </g> <g transform="translate(1.0962334,-2.7492248)"
@@ -1392,52 +1352,51 @@ y="1046.0962" id="text4090-8-7-8-7-6-3-8-2" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="42.212418" y="1046.0962" id="tspan4092-8-6-3-1-8-4-4-5" - style="font-size:11px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">Available from patchwork, or email header. Reply to Cover letters.</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:11px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">Available from patchwork, or email header. Reply to Cover letters.</tspan></text> <text x="31.140535" y="1049.8527" id="text4090-8-7-8-7-6-3-8-4-1-2-2" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="31.140535" y="1049.8527" id="tspan4092-8-6-3-1-8-4-4-55-7-3-3" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="25.445322" y="1049.8527" id="text4090-8-7-8-7-6-3-8-4-1-2-5-2" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="25.445322" y="1049.8527" id="tspan4092-8-6-3-1-8-4-4-55-7-3-7-2" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="19.750109" y="1049.8527" id="text4090-8-7-8-7-6-3-8-4-1-2-7-1" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="19.750109" y="1049.8527" id="tspan4092-8-6-3-1-8-4-4-55-7-3-9-6" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> <text x="14.016749" y="1049.8527" id="text4090-8-7-8-7-6-3-8-4-1-2-7-1-8" xml:space="preserve" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace Bold"><tspan + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:0%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan x="14.016749" y="1049.8527" id="tspan4092-8-6-3-1-8-4-4-55-7-3-9-6-5" - style="font-size:13px;font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace Bold">*</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:300;font-stretch:normal;font-size:13px;line-height:125%;font-family:monospace;-inkscape-font-specification:'Monospace Bold';text-align:start;writing-mode:lr-tb;text-anchor:start">*</tspan></text> </g> <rect width="196.44218"
@@ -1449,36 +1408,35 @@ id="rect3239-0-9-4-2-1-9-9-7" style="fill:none;stroke:#00233b;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> <rect - width="678.43036" - height="43.497677" - rx="7.8557949" - ry="6.7630997" - x="31.274473" - y="836.69745" + width="710.73767" + height="43.476074" + rx="8.2298937" + ry="6.7597408" + x="31.285275" + y="836.70825" id="rect3239-0-9-4-3-6" - style="fill:none;stroke:#00233b;stroke-width:0.92794865;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" /> + style="fill:none;stroke:#00233b;stroke-width:0.949551;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> <text x="73.804535" y="864.28137" id="text4090-8-1-8-65-9-1" xml:space="preserve" - style="font-size:19px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:0%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan sodipodi:role="line" x="73.804535" y="864.28137" - id="tspan3266-8">git format-patch -[N]</tspan></text> + id="tspan3266-8" + style="font-size:19px;line-height:1.25;font-family:monospace">git format-patch -[N]</tspan></text> <text x="342.70221" y="862.83478" id="text4090-8-1-8-65-9-1-7" xml:space="preserve" - style="font-size:19px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;font-family:Monospace;-inkscape-font-specification:Monospace" - sodipodi:linespacing="125%"><tspan + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:0%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"><tspan sodipodi:role="line" x="342.70221" y="862.83478" id="tspan3266-8-2" - style="font-size:14px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Monospace;-inkscape-font-specification:Monospace">// creates .patch files for final review</tspan></text> + style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:14px;line-height:125%;font-family:monospace;-inkscape-font-specification:Monospace;text-align:start;writing-mode:lr-tb;text-anchor:start">// creates .patch files for final review</tspan></text> </g> </svg>
Signature · 1 line
2.22.0
v7 cover remove make support in DPDK
In reply to Ciara PowerThis patchset includes the remaining 14 patches that were not merged along with the others in v4/v5, pending rework and more review. *All*, please make the documentation update your highest priority.
v7:
- Merged some changes from patch [3] for platform/octeontx.rst.
- Rebased onto main and fixed conflicts.
- Added config option for mempool/octeontx.rst that was incorrectly removed in previous versions.
- Fixed comments on v6.
v6:
- Rebased onto main and fixed conflicts.
- Fixed some formatting and indentation.
- Reworded some commit logs and fixed spellings.
v5:
- Added patch to update cheatsheet.
- Added patch to update release notes.
- Fixed outstanding comments on v3/v4.
v4: rearrange commits and fix as commented
v3: Fixed comments on v2.
v2:
- Fixed comments on v1.
- Removed additional make references.
- Added some meson replacements where necessary.
- Added dummy root Makefile.
As previously decided [1] and communicated via deprecation notice [2], the make build system is to be removed in the 20.11 release.
This patchset removes support for compiling DPDK with the legacy make build system. Some make support is maintained for example applications, where pkg-config is used rather than the legacy make method.
References to the make build system are removed from all documentation, please review to see if replacement meson instructions are needed in some cases.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
[2] http://git.dpdk.org/dpdk/commit/?id=a5449d78d1413e7bd1d66f6e70884e46cfb5e673
[3] https://patches.dpdk.org/patch/72274/
Ciara Power (13):
doc: remove references to make from platforms guides
doc: remove references to make from mempool guide
doc: remove references to make from NICs guides
doc: remove references to make from vdpadevs guides
doc: remove references to make from bbdevs guides
doc: remove references to make from cryptodevs guides
doc: remove references to make from compressdevs guides
doc: remove references to make from eventdevs guides
doc: remove references to make from rawdevs guides
doc: remove references to make from app guides
doc: remove reference to make from tools guides
doc: remove references to make from contributing guide
doc: add to release notes to reflect removal of make
Kevin Laatz (1):
doc: update patch cheatsheet to use meson
doc/guides/bbdevs/fpga_5gnr_fec.rst | 5 +- doc/guides/bbdevs/fpga_lte_fec.rst | 5 +- doc/guides/bbdevs/turbo_sw.rst | 23 +- doc/guides/compressdevs/isal.rst | 4 - doc/guides/compressdevs/octeontx.rst | 24 +- doc/guides/compressdevs/zlib.rst | 4 - doc/guides/contributing/design.rst | 37 +- doc/guides/contributing/documentation.rst | 31 +- .../contributing/img/patch_cheatsheet.svg | 582 ++++++++---------- doc/guides/contributing/patches.rst | 6 +- doc/guides/cryptodevs/aesni_gcm.rst | 4 +- doc/guides/cryptodevs/aesni_mb.rst | 4 +- doc/guides/cryptodevs/armv8.rst | 3 - doc/guides/cryptodevs/caam_jr.rst | 30 - doc/guides/cryptodevs/ccp.rst | 12 +- doc/guides/cryptodevs/dpaa2_sec.rst | 25 - doc/guides/cryptodevs/dpaa_sec.rst | 25 - doc/guides/cryptodevs/kasumi.rst | 11 +- doc/guides/cryptodevs/mvsam.rst | 10 +- doc/guides/cryptodevs/nitrox.rst | 7 - doc/guides/cryptodevs/null.rst | 2 +- doc/guides/cryptodevs/octeontx.rst | 12 +- doc/guides/cryptodevs/octeontx2.rst | 8 +- doc/guides/cryptodevs/openssl.rst | 6 +- doc/guides/cryptodevs/qat.rst | 65 +- doc/guides/cryptodevs/scheduler.rst | 8 - doc/guides/cryptodevs/snow3g.rst | 10 +- doc/guides/cryptodevs/virtio.rst | 20 +- doc/guides/cryptodevs/zuc.rst | 10 +- doc/guides/eventdevs/dpaa.rst | 23 - doc/guides/eventdevs/dpaa2.rst | 23 - doc/guides/eventdevs/octeontx.rst | 24 - doc/guides/eventdevs/octeontx2.rst | 15 +- doc/guides/mempool/octeontx.rst | 16 +- doc/guides/mempool/octeontx2.rst | 10 +- doc/guides/nics/ark.rst | 7 +- doc/guides/nics/atlantic.rst | 4 - doc/guides/nics/axgbe.rst | 15 - doc/guides/nics/bnx2x.rst | 21 +- doc/guides/nics/bnxt.rst | 5 +- doc/guides/nics/build_and_test.rst | 6 +- doc/guides/nics/cxgbe.rst | 36 +- doc/guides/nics/dpaa.rst | 27 +- doc/guides/nics/dpaa2.rst | 26 +- doc/guides/nics/ena.rst | 16 - doc/guides/nics/enetc.rst | 2 - doc/guides/nics/enic.rst | 12 - doc/guides/nics/fail_safe.rst | 20 +- doc/guides/nics/features.rst | 9 - doc/guides/nics/fm10k.rst | 4 - doc/guides/nics/hinic.rst | 9 - doc/guides/nics/hns3.rst | 10 - doc/guides/nics/i40e.rst | 44 +- doc/guides/nics/ice.rst | 25 +- doc/guides/nics/igc.rst | 18 +- doc/guides/nics/intel_vf.rst | 13 +- doc/guides/nics/ionic.rst | 8 - doc/guides/nics/ipn3ke.rst | 12 +- doc/guides/nics/kni.rst | 4 +- doc/guides/nics/liquidio.rst | 27 - doc/guides/nics/memif.rst | 10 +- doc/guides/nics/mlx4.rst | 55 +- doc/guides/nics/mlx5.rst | 62 +- doc/guides/nics/mvneta.rst | 36 +- doc/guides/nics/mvpp2.rst | 43 +- doc/guides/nics/nfb.rst | 19 +- doc/guides/nics/nfp.rst | 4 - doc/guides/nics/null.rst | 6 +- doc/guides/nics/octeontx.rst | 19 +- doc/guides/nics/octeontx2.rst | 13 +- doc/guides/nics/pcap_ring.rst | 24 +- doc/guides/nics/qede.rst | 31 +- doc/guides/nics/softnic.rst | 13 +- doc/guides/nics/szedata2.rst | 18 +- doc/guides/nics/thunderx.rst | 25 +- doc/guides/nics/vdev_netvsc.rst | 6 - doc/guides/nics/vhost.rst | 2 +- doc/guides/nics/virtio.rst | 4 +- doc/guides/platform/bluefield.rst | 22 - doc/guides/platform/octeontx.rst | 51 +- doc/guides/platform/octeontx2.rst | 32 - doc/guides/rawdevs/dpaa2_cmdif.rst | 21 - doc/guides/rawdevs/dpaa2_qdma.rst | 21 - doc/guides/rawdevs/ifpga.rst | 10 - doc/guides/rawdevs/ntb.rst | 6 - doc/guides/rawdevs/octeontx2_dma.rst | 12 - doc/guides/rawdevs/octeontx2_ep.rst | 8 - doc/guides/rel_notes/release_20_11.rst | 4 + doc/guides/sample_app_ug/bbdev_app.rst | 34 +- doc/guides/sample_app_ug/cmd_line.rst | 2 +- doc/guides/sample_app_ug/compiling.rst | 83 +-- doc/guides/sample_app_ug/dist_app.rst | 4 +- doc/guides/sample_app_ug/ethtool.rst | 2 +- .../sample_app_ug/eventdev_pipeline.rst | 3 +- doc/guides/sample_app_ug/fips_validation.rst | 10 +- doc/guides/sample_app_ug/flow_classify.rst | 4 +- doc/guides/sample_app_ug/flow_filtering.rst | 25 +- doc/guides/sample_app_ug/hello_world.rst | 2 +- doc/guides/sample_app_ug/ioat.rst | 6 +- doc/guides/sample_app_ug/ip_frag.rst | 6 +- doc/guides/sample_app_ug/ip_pipeline.rst | 4 +- doc/guides/sample_app_ug/ip_reassembly.rst | 9 +- doc/guides/sample_app_ug/ipsec_secgw.rst | 14 +- doc/guides/sample_app_ug/ipv4_multicast.rst | 4 +- doc/guides/sample_app_ug/keep_alive.rst | 4 +- .../sample_app_ug/kernel_nic_interface.rst | 14 +- doc/guides/sample_app_ug/l2_forward_cat.rst | 4 +- .../sample_app_ug/l2_forward_crypto.rst | 4 +- doc/guides/sample_app_ug/l2_forward_event.rst | 10 +- .../sample_app_ug/l2_forward_job_stats.rst | 4 +- .../sample_app_ug/l2_forward_real_virtual.rst | 6 +- doc/guides/sample_app_ug/l3_forward.rst | 10 +- .../sample_app_ug/l3_forward_access_ctrl.rst | 6 +- doc/guides/sample_app_ug/l3_forward_graph.rst | 4 +- .../sample_app_ug/l3_forward_power_man.rst | 14 +- doc/guides/sample_app_ug/link_status_intr.rst | 4 +- doc/guides/sample_app_ug/multi_process.rst | 20 +- doc/guides/sample_app_ug/ntb.rst | 2 +- doc/guides/sample_app_ug/packet_ordering.rst | 3 +- .../sample_app_ug/performance_thread.rst | 44 +- doc/guides/sample_app_ug/ptpclient.rst | 9 +- doc/guides/sample_app_ug/qos_metering.rst | 2 +- doc/guides/sample_app_ug/qos_scheduler.rst | 10 +- doc/guides/sample_app_ug/rxtx_callbacks.rst | 9 +- doc/guides/sample_app_ug/server_node_efd.rst | 2 +- doc/guides/sample_app_ug/service_cores.rst | 23 +- doc/guides/sample_app_ug/skeleton.rst | 2 +- doc/guides/sample_app_ug/tep_termination.rst | 43 +- doc/guides/sample_app_ug/test_pipeline.rst | 4 +- doc/guides/sample_app_ug/timer.rst | 2 +- doc/guides/sample_app_ug/vdpa.rst | 4 +- doc/guides/sample_app_ug/vhost.rst | 11 +- doc/guides/sample_app_ug/vhost_blk.rst | 2 +- doc/guides/sample_app_ug/vhost_crypto.rst | 2 +- .../sample_app_ug/vm_power_management.rst | 34 +- .../sample_app_ug/vmdq_dcb_forwarding.rst | 8 +- doc/guides/sample_app_ug/vmdq_forwarding.rst | 8 +- doc/guides/testpmd_app_ug/run_app.rst | 6 +- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 +- doc/guides/tools/comp_perf.rst | 14 +- doc/guides/tools/cryptoperf.rst | 27 +- doc/guides/tools/pdump.rst | 15 +- doc/guides/tools/proc_info.rst | 2 +- doc/guides/tools/testbbdev.rst | 44 +- doc/guides/tools/testeventdev.rst | 29 +- doc/guides/vdpadevs/ifc.rst | 13 - doc/guides/vdpadevs/mlx5.rst | 34 +- 147 files changed, 729 insertions(+), 2065 deletions(-)
Signature · 1 line
2.22.0
PATCH v7 1/14 doc: remove references to make from platforms guides
Make is no longer supported for compiling DPDK, references are now removed in the documentation.
---
v7: Merged changes from another patch, as suggested by the author on v6,
and added the relevant sign off.
--- doc/guides/platform/bluefield.rst | 22 ------------- doc/guides/platform/octeontx.rst | 51 ++++++++++++------------------- doc/guides/platform/octeontx2.rst | 32 ------------------- 3 files changed, 19 insertions(+), 86 deletions(-)
doc/guides/platform/bluefield.rst +0 -22
@@ -60,17 +60,6 @@ Native Compilation Refer to :doc:`../nics/mlx5` for prerequisites. Either Mellanox OFED/EN or rdma-core library with corresponding kernel drivers is required. -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-bluefield-linux-gcc - make -j - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build
@@ -126,17 +115,6 @@ Then, untar the tarball at the cross toolchain directory on the x86 host. cd $(dirname $(which aarch64-linux-gnu-gcc))/.. tar xf aarch64-linux-gnu-mlx.tar -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-bluefield-linux-gcc - make -j CROSS=aarch64-linux-gnu- CONFIG_RTE_KNI_KMOD=n CONFIG_RTE_EAL_IGB_UIO=n - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build --cross-file config/arm/arm64_bluefield_linux_gcc
doc/guides/platform/octeontx.rst +19 -32
82 lines not on this page · raw message
doc/guides/platform/octeontx2.rst +0 -32
@@ -503,27 +503,6 @@ an x86 based platform. Native Compilation ~~~~~~~~~~~~~~~~~~ -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-octeontx2-linux-gcc - make -j - -The example applications can be compiled using the following: - -.. code-block:: console - - cd <dpdk directory> - export RTE_SDK=$PWD - export RTE_TARGET=build - cd examples/<application> - make -j - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build
@@ -534,17 +513,6 @@ Cross Compilation Refer to :doc:`../linux_gsg/cross_build_dpdk_for_arm64` for generic arm64 details. -make build -^^^^^^^^^^ - -.. code-block:: console - - make config T=arm64-octeontx2-linux-gcc - make -j CROSS=aarch64-marvell-linux-gnu- CONFIG_RTE_KNI_KMOD=n - -meson build -^^^^^^^^^^^ - .. code-block:: console meson build --cross-file config/arm/arm64_octeontx2_linux_gcc
Signature · 1 line
2.22.0
PATCH v7 2/14 doc: remove references to make from mempool guide
In reply to Ciara PowerMake is no longer supported for compiling DPDK, references are now removed in the documentation.
---
v7: Added back in config option that is available in meson config file.
--- doc/guides/mempool/octeontx.rst | 16 +++------------- doc/guides/mempool/octeontx2.rst | 10 +--------- 2 files changed, 4 insertions(+), 22 deletions(-)
doc/guides/mempool/octeontx.rst +3 -13
@@ -36,27 +36,17 @@ Pre-Installation Configuration Config File Options ~~~~~~~~~~~~~~~~~~~ -The following options can be modified in the ``config`` file. +The following option can be modified in the ``config/rte_config.h`` file. Please note that enabling debugging options may affect system performance. - ``CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS`` ( set to ``octeontx_fpavf``) Set default mempool ops to octeontx_fpavf. -- ``CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL`` (default ``y``) - - Toggle compilation of the ``librte_mempool_octeontx`` driver. - Driver Compilation ~~~~~~~~~~~~~~~~~~ -To compile the OCTEON TX FPAVF MEMPOOL PMD for Linux arm64 gcc target, run the -following ``make`` command: - -.. code-block:: console - - cd <DPDK-source-directory> - make config T=arm64-thunderx-linux-gcc +See :doc:`../linux_gsg/build_dpdk` for more information on compiling DPDK. Initialization
@@ -70,5 +60,5 @@ Example: .. code-block:: console - ./build/app/test -c 0xf --base-virtaddr=0x100000000000 \ + ./<build_dir>/app/test/dpdk-test -c 0xf --base-virtaddr=0x100000000000 \ --mbuf-pool-ops-name="octeontx_fpavf"
doc/guides/mempool/octeontx2.rst +1 -9
@@ -29,14 +29,6 @@ Prerequisites and Compilation procedure Pre-Installation Configuration ------------------------------ -Compile time Config Options -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The following option can be modified in the ``config`` file. - -- ``CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL`` (default ``y``) - - Toggle compilation of the ``librte_mempool_octeontx2`` driver. Runtime Config Options ~~~~~~~~~~~~~~~~~~~~~~
@@ -97,4 +89,4 @@ Standalone mempool device Example command to run ``mempool_autotest`` test with standalone OCTEONTX2 NPA device:: - echo "mempool_autotest" | build/app/test -c 0xf0 --mbuf-pool-ops-name="octeontx2_npa" + echo "mempool_autotest" | <build_dir>/app/test/dpdk-test -c 0xf0 --mbuf-pool-ops-name="octeontx2_npa"
Signature · 1 line
2.22.0