Skip to contentSkip to conversation

selinux: allow labeling before policy is loaded

PATCH In review Sasha Levin 4 participants 209 messages Sep 18, 2020 Page 2 of 2

Subsystems (40)
lore
Share & tools
lore
author maintainer
#146 lore raw

PATCH 144/206 KVM: Remove CREATE_IRQCHIP/SET_PIT2 race

In reply to Sasha Levin

From: Steve Rutherford <[email protected]>

[ Upstream commit 7289fdb5dcdbc5155b5531529c44105868a762f2 ]

Fixes a NULL pointer dereference, caused by the PIT firing an interrupt before the interrupt table has been initialized.

SET_PIT2 can race with the creation of the IRQchip. In particular, if SET_PIT2 is called with a low PIT timer period (after the creation of the IOAPIC, but before the instantiation of the irq routes), the PIT can fire an interrupt at an uninitialized table.

Message-Id: <[email protected]>

---
 arch/x86/kvm/x86.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
arch/x86/kvm/x86.c +8 -2
index 430a4bc66f604..620ed1fa35119 100644
@@ -4668,10 +4668,13 @@ set_identity_unlock:
 		r = -EFAULT;
 		if (copy_from_user(&u.ps, argp, sizeof u.ps))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit_out;
 		r = kvm_vm_ioctl_set_pit(kvm, &u.ps);
+set_pit_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_GET_PIT2: {
@@ -4691,10 +4694,13 @@ set_identity_unlock:
 		r = -EFAULT;
 		if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit2_out;
 		r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+set_pit2_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_REINJECT_CONTROL: {
Signature · 1 line
2.25.1
author maintainer
#147 lore raw

PATCH 145/206 perf stat: Force error in fallback on :k events

In reply to Sasha Levin

From: Stephane Eranian <[email protected]>

[ Upstream commit bec49a9e05db3dbdca696fa07c62c52638fb6371 ]

When it is not possible for a non-privilege perf command to monitor at the kernel level (:k), the fallback code forces a :u. That works if the event was previously monitoring both levels. But if the event was already constrained to kernel only, then it does not make sense to restrict it to user only.

Given the code works by exclusion, a kernel only event would have:

attr->exclude_user = 1

The fallback code would add:

attr->exclude_kernel = 1

In the end the end would not monitor in either the user level or kernel level. In other words, it would count nothing.

An event programmed to monitor kernel only cannot be switched to user only without seriously warning the user.

This patch forces an error in this case to make it clear the request cannot really be satisfied.

Behavior with paranoid 1:

  $ sudo bash -c "echo 1 > /proc/sys/kernel/perf_event_paranoid"
  $ perf stat -e cycles:k sleep 1

Performance counter stats for 'sleep 1':

           1,520,413      cycles:k

         1.002361664 seconds time elapsed

         0.002480000 seconds user
         0.000000000 seconds sys

Old behavior with paranoid 2:

  $ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
  $ perf stat -e cycles:k sleep 1
   Performance counter stats for 'sleep 1':
                   0      cycles:ku

         1.002358127 seconds time elapsed

         0.002384000 seconds user
         0.000000000 seconds sys

New behavior with paranoid 2:

  $ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
  $ perf stat -e cycles:k sleep 1
  Error:
  You may not have permission to collect stats.

Consider tweaking /proc/sys/kernel/perf_event_paranoid, which controls use of the performance events system by unprivileged users (without CAP_PERFMON or CAP_SYS_ADMIN).

The current value is 2:

-1: Allow use of (almost) all events by all users
Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK

Quoted 1 line

= 0: Disallow ftrace function tracepoint by users without CAP_PERFMON or CAP_SYS_ADMIN

Disallow raw tracepoint access by users without CAP_SYS_PERFMON or CAP_SYS_ADMIN

Quoted 2 lines

= 1: Disallow CPU event access by users without CAP_PERFMON or CAP_SYS_ADMIN = 2: Disallow kernel profiling by users without CAP_PERFMON or CAP_SYS_ADMIN

To make this setting permanent, edit /etc/sysctl.conf too, e.g.:

kernel.perf_event_paranoid = -1

v2 of this patch addresses the review feedback from [email protected].

---
 tools/perf/util/evsel.c | 4 ++++
 1 file changed, 4 insertions(+)
tools/perf/util/evsel.c +4 -0
index 68c5ab0e1800b..e8586957562b3 100644
@@ -2796,6 +2796,10 @@ bool perf_evsel__fallback(struct perf_evsel *evsel, int err,
 		char *new_name;
 		const char *sep = ":";
 
+		/* If event has exclude user then don't exclude kernel. */
+		if (evsel->core.attr.exclude_user)
+			return false;
+
 		/* Is there already the separator in the name. */
 		if (strchr(name, '/') ||
 		    strchr(name, ':'))
Signature · 1 line
2.25.1
author maintainer
#148 lore raw

PATCH 146/206 bdev: Reduce time holding bd_mutex in sync in blkdev_close()

In reply to Sasha Levin

From: Douglas Anderson <[email protected]>

[ Upstream commit b849dd84b6ccfe32622988b79b7b073861fcf9f7 ]

While trying to "dd" to the block device for a USB stick, I encountered a hung task warning (blocked for > 120 seconds). I managed to come up with an easy way to reproduce this on my system (where /dev/sdb is the block device for my USB stick) with:

while true; do dd if=/dev/zero of=/dev/sdb bs=4M; done

With my reproduction here are the relevant bits from the hung task detector:

 INFO: task udevd:294 blocked for more than 122 seconds.
 ...
 udevd           D    0   294      1 0x00400008
 Call trace:
  ...
  mutex_lock_nested+0x40/0x50
  __blkdev_get+0x7c/0x3d4
  blkdev_get+0x118/0x138
  blkdev_open+0x94/0xa8
  do_dentry_open+0x268/0x3a0
  vfs_open+0x34/0x40
  path_openat+0x39c/0xdf4
  do_filp_open+0x90/0x10c
  do_sys_open+0x150/0x3c8
  ...

...

 Showing all locks held in the system:
 ...
 1 lock held by dd/2798:
  #0: ffffff814ac1a3b8 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x50/0x204
 ...
 dd              D    0  2798   2764 0x00400208
 Call trace:
  ...
  schedule+0x8c/0xbc
  io_schedule+0x1c/0x40
  wait_on_page_bit_common+0x238/0x338
  __lock_page+0x5c/0x68
  write_cache_pages+0x194/0x500
  generic_writepages+0x64/0xa4
  blkdev_writepages+0x24/0x30
  do_writepages+0x48/0xa8
  __filemap_fdatawrite_range+0xac/0xd8
  filemap_write_and_wait+0x30/0x84
  __blkdev_put+0x88/0x204
  blkdev_put+0xc4/0xe4
  blkdev_close+0x28/0x38
  __fput+0xe0/0x238
  ____fput+0x1c/0x28
  task_work_run+0xb0/0xe4
  do_notify_resume+0xfc0/0x14bc
  work_pending+0x8/0x14

The problem appears related to the fact that my USB disk is terribly slow and that I have a lot of RAM in my system to cache things. Specifically my writes seem to be happening at ~15 MB/s and I've got ~4 GB of RAM in my system that can be used for buffering. To write 4 GB of buffer to disk thus takes ~4000 MB / ~15 MB/s = ~267 seconds.

The 267 second number is a problem because in __blkdev_put() we call sync_blockdev() while holding the bd_mutex. Any other callers who want the bd_mutex will be blocked for the whole time.

The problem is made worse because I believe blkdev_put() specifically tells other tasks (namely udev) to go try to access the device at right around the same time we're going to hold the mutex for a long time.

Putting some traces around this (after disabling the hung task detector), I could confirm:
dd: 437.608600: __blkdev_put() right before sync_blockdev() for sdb
udevd: 437.623901: blkdev_open() right before blkdev_get() for sdb
dd: 661.468451: __blkdev_put() right after sync_blockdev() for sdb
udevd: 663.820426: blkdev_open() right after blkdev_get() for sdb

A simple fix for this is to realize that sync_blockdev() works fine if you're not holding the mutex. Also, it's not the end of the world if you sync a little early (though it can have performance impacts). Thus we can make a guess that we're going to need to do the sync and then do it without holding the mutex. We still do one last sync with the mutex but it should be much, much faster.

With this, my hung task warnings for my test case are gone.

---
 fs/block_dev.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
fs/block_dev.c +10 -0
index 8ac8f7469354b..9f3faac490259 100644
@@ -1793,6 +1793,16 @@ static void __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part)
 	struct gendisk *disk = bdev->bd_disk;
 	struct block_device *victim = NULL;
 
+	/*
+	 * Sync early if it looks like we're the last one.  If someone else
+	 * opens the block device between now and the decrement of bd_openers
+	 * then we did a sync that we didn't need to, but that's not the end
+	 * of the world and we want to avoid long (could be several minute)
+	 * syncs while holding the mutex.
+	 */
+	if (bdev->bd_openers == 1)
+		sync_blockdev(bdev);
+
 	mutex_lock_nested(&bdev->bd_mutex, for_part);
 	if (for_part)
 		bdev->bd_part_count--;
Signature · 1 line
2.25.1
author maintainer
#149 lore raw

PATCH 147/206 drivers: char: tlclk.c: Avoid data race between init and interrupt handler

In reply to Sasha Levin

From: Madhuparna Bhowmik <[email protected]>

[ Upstream commit 44b8fb6eaa7c3fb770bf1e37619cdb3902cca1fc ]

After registering character device the file operation callbacks can be called. The open callback registers interrupt handler. Therefore interrupt handler can execute in parallel with rest of the init function. To avoid such data race initialize telclk_interrupt variable and struct alarm_events before registering character device.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/char/tlclk.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
drivers/char/tlclk.c +10 -7
index 8eeb4190207d1..dce22b7fc5449 100644
@@ -776,17 +776,21 @@ static int __init tlclk_init(void)
 {
 	int ret;
 
+	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
+
+	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
+	if (!alarm_events) {
+		ret = -ENOMEM;
+		goto out1;
+	}
+
 	ret = register_chrdev(tlclk_major, "telco_clock", &tlclk_fops);
 	if (ret < 0) {
 		printk(KERN_ERR "tlclk: can't get major %d.\n", tlclk_major);
+		kfree(alarm_events);
 		return ret;
 	}
 	tlclk_major = ret;
-	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
-	if (!alarm_events) {
-		ret = -ENOMEM;
-		goto out1;
-	}
 
 	/* Read telecom clock IRQ number (Set by BIOS) */
 	if (!request_region(TLCLK_BASE, 8, "telco_clock")) {
@@ -795,7 +799,6 @@ static int __init tlclk_init(void)
 		ret = -EBUSY;
 		goto out2;
 	}
-	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
 
 	if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
 		printk(KERN_ERR "telclk_interrupt = 0x%x non-mcpbl0010 hw.\n",
@@ -836,8 +839,8 @@ out3:
 	release_region(TLCLK_BASE, 8);
 out2:
 	kfree(alarm_events);
-out1:
 	unregister_chrdev(tlclk_major, "telco_clock");
+out1:
 	return ret;
 }
 
Signature · 1 line
2.25.1
author maintainer
#150 lore raw

PATCH 148/206 KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi()

In reply to Sasha Levin

From: Zenghui Yu <[email protected]>

[ Upstream commit 57bdb436ce869a45881d8aa4bc5dac8e072dd2b6 ]

If we're going to fail out the vgic_add_lpi(), let's make sure the allocated vgic_irq memory is also freed. Though it seems that both cases are unlikely to fail.

---
 virt/kvm/arm/vgic/vgic-its.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
virt/kvm/arm/vgic/vgic-its.c +9 -2
index 9295addea7ecf..f139b1c62ca38 100644
@@ -107,14 +107,21 @@ out_unlock:
 	 * We "cache" the configuration table entries in our struct vgic_irq's.
 	 * However we only have those structs for mapped IRQs, so we read in
 	 * the respective config data from memory here upon mapping the LPI.
+	 *
+	 * Should any of these fail, behave as if we couldn't create the LPI
+	 * by dropping the refcount and returning the error.
 	 */
 	ret = update_lpi_config(kvm, irq, NULL, false);
-	if (ret)
+	if (ret) {
+		vgic_put_irq(kvm, irq);
 		return ERR_PTR(ret);
+	}
 
 	ret = vgic_v3_lpi_sync_pending_status(kvm, irq);
-	if (ret)
+	if (ret) {
+		vgic_put_irq(kvm, irq);
 		return ERR_PTR(ret);
+	}
 
 	return irq;
 }
Signature · 6 lines
2.25.1

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
author maintainer
#151 lore raw

PATCH 149/206 net: openvswitch: use u64 for meter bucket

In reply to Sasha Levin

From: Tonghao Zhang <[email protected]>

[ Upstream commit e57358873bb5d6caa882b9684f59140912b37dde ]

When setting the meter rate to 4+Gbps, there is an overflow, the meters don't work as expected.

---
 net/openvswitch/meter.c | 2 +-
 net/openvswitch/meter.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
net/openvswitch/meter.c +1 -1
index c038e021a5916..6f5131d1074b0 100644
@@ -255,7 +255,7 @@ static struct dp_meter *dp_meter_create(struct nlattr **a)
 		 *
 		 * Start with a full bucket.
 		 */
-		band->bucket = (band->burst_size + band->rate) * 1000;
+		band->bucket = (band->burst_size + band->rate) * 1000ULL;
 		band_max_delta_t = band->bucket / band->rate;
 		if (band_max_delta_t > meter->max_delta_t)
 			meter->max_delta_t = band_max_delta_t;
net/openvswitch/meter.h +1 -1
index 964ace2650f89..970557ed5b5b6 100644
@@ -26,7 +26,7 @@ struct dp_meter_band {
 	u32 type;
 	u32 rate;
 	u32 burst_size;
-	u32 bucket; /* 1/1000 packets, or in bits */
+	u64 bucket; /* 1/1000 packets, or in bits */
 	struct ovs_flow_stats stats;
 };
 
Signature · 1 line
2.25.1
author maintainer
#152 lore raw

PATCH 150/206 scsi: aacraid: Fix error handling paths in aac_probe_one()

In reply to Sasha Levin

From: Christophe JAILLET <[email protected]>

[ Upstream commit f7854c382240c1686900b2f098b36430c6f5047e ]

If 'scsi_host_alloc()' or 'kcalloc()' fail, 'error' is known to be 0. Set it explicitly to -ENOMEM before branching to the error handling path.

While at it, remove 2 useless assignments to 'error'. These values are overwridden a few lines later.

---
 drivers/scsi/aacraid/linit.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/scsi/aacraid/linit.c +8 -4
index 0142547aaadd2..eecffc03084c0 100644
@@ -1620,7 +1620,7 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct Scsi_Host *shost;
 	struct aac_dev *aac;
 	struct list_head *insert = &aac_devices;
-	int error = -ENODEV;
+	int error;
 	int unique_id = 0;
 	u64 dmamask;
 	int mask_bits = 0;
@@ -1645,7 +1645,6 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	error = pci_enable_device(pdev);
 	if (error)
 		goto out;
-	error = -ENODEV;
 
 	if (!(aac_drivers[index].quirks & AAC_QUIRK_SRC)) {
 		error = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
@@ -1677,8 +1676,10 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_set_master(pdev);
 
 	shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev));
-	if (!shost)
+	if (!shost) {
+		error = -ENOMEM;
 		goto out_disable_pdev;
+	}
 
 	shost->irq = pdev->irq;
 	shost->unique_id = unique_id;
@@ -1703,8 +1704,11 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	aac->fibs = kcalloc(shost->can_queue + AAC_NUM_MGT_FIB,
 			    sizeof(struct fib),
 			    GFP_KERNEL);
-	if (!aac->fibs)
+	if (!aac->fibs) {
+		error = -ENOMEM;
 		goto out_free_host;
+	}
+
 	spin_lock_init(&aac->fib_lock);
 
 	mutex_init(&aac->ioctl_mutex);
Signature · 1 line
2.25.1
author maintainer
#153 lore raw

PATCH 151/206 staging:r8188eu: avoid skb_clone for amsdu to msdu conversion

In reply to Sasha Levin

From: Ivan Safonov <[email protected]>

[ Upstream commit 628cbd971a927abe6388d44320e351c337b331e4 ]

skb clones use same data buffer,
so tail of one skb is corrupted by beginning of next skb.

---
 drivers/staging/rtl8188eu/core/rtw_recv.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/staging/rtl8188eu/core/rtw_recv.c +6 -13
index 17b4b9257b495..0ddf41b5a734a 100644
@@ -1535,21 +1535,14 @@ static int amsdu_to_msdu(struct adapter *padapter, struct recv_frame *prframe)
 
 		/* Allocate new skb for releasing to upper layer */
 		sub_skb = dev_alloc_skb(nSubframe_Length + 12);
-		if (sub_skb) {
-			skb_reserve(sub_skb, 12);
-			skb_put_data(sub_skb, pdata, nSubframe_Length);
-		} else {
-			sub_skb = skb_clone(prframe->pkt, GFP_ATOMIC);
-			if (sub_skb) {
-				sub_skb->data = pdata;
-				sub_skb->len = nSubframe_Length;
-				skb_set_tail_pointer(sub_skb, nSubframe_Length);
-			} else {
-				DBG_88E("skb_clone() Fail!!! , nr_subframes=%d\n", nr_subframes);
-				break;
-			}
+		if (!sub_skb) {
+			DBG_88E("dev_alloc_skb() Fail!!! , nr_subframes=%d\n", nr_subframes);
+			break;
 		}
 
+		skb_reserve(sub_skb, 12);
+		skb_put_data(sub_skb, pdata, nSubframe_Length);
+
 		subframes[nr_subframes++] = sub_skb;
 
 		if (nr_subframes >= MAX_SUBFRAME_COUNT) {
Signature · 1 line
2.25.1
author maintainer
#154 lore raw

PATCH 152/206 sparc64: vcc: Fix error return code in vcc_probe()

In reply to Sasha Levin

From: Wei Yongjun <[email protected]>

[ Upstream commit ff62255a2a5c1228a28f2bb063646f948115a309 ]

Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function.

---
 drivers/tty/vcc.c | 1 +
 1 file changed, 1 insertion(+)
drivers/tty/vcc.c +1 -0
index 58b454c34560a..10a832a2135e2 100644
@@ -604,6 +604,7 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	port->index = vcc_table_add(port);
 	if (port->index == -1) {
 		pr_err("VCC: no more TTY indices left for allocation\n");
+		rv = -ENOMEM;
 		goto free_ldc;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#155 lore raw

PATCH 153/206 arm64: cpufeature: Relax checks for AArch32 support at EL[0-2]

In reply to Sasha Levin

From: Will Deacon <[email protected]>

[ Upstream commit 98448cdfe7060dd5491bfbd3f7214ffe1395d58e ]

We don't need to be quite as strict about mismatched AArch32 support, which is good because the friendly hardware folks have been busy mismatching this to their hearts' content.

* We don't care about EL2 or EL3 (there are silly comments concerning the latter, so remove those)

* EL1 support is gated by the ARM64_HAS_32BIT_EL1 capability and handled gracefully when a mismatch occurs

* EL0 support is gated by the ARM64_HAS_32BIT_EL0 capability and handled gracefully when a mismatch occurs

Relax the AArch32 checks to FTR_NONSTRICT.

---
 arch/arm64/kernel/cpufeature.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
arch/arm64/kernel/cpufeature.c +3 -7
index ac3126aba0368..095dec566275f 100644
@@ -155,11 +155,10 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
-	/* Linux doesn't care about the EL3 */
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL3_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
 	ARM64_FTR_END,
 };
 
@@ -671,9 +670,6 @@ void update_cpu_features(int cpu,
 	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR2_EL1, cpu,
 				      info->reg_id_aa64mmfr2, boot->reg_id_aa64mmfr2);
 
-	/*
-	 * EL3 is not our concern.
-	 */
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR0_EL1, cpu,
 				      info->reg_id_aa64pfr0, boot->reg_id_aa64pfr0);
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR1_EL1, cpu,
Signature · 7 lines
2.25.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#156 lore raw

PATCH 154/206 dt-bindings: sound: wm8994: Correct required supplies based on actual implementaion

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 8c149b7d75e53be47648742f40fc90d9fc6fa63a ]

The required supplies in bindings were actually not matching implementation making the bindings incorrect and misleading. The Linux kernel driver requires all supplies to be present. Also for wlf,wm8994 uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>).

---
 .../devicetree/bindings/sound/wm8994.txt       | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
Documentation/devicetree/bindings/sound/wm8994.txt +12 -6
index 68cccc4653ba3..367b58ce1bb92 100644
@@ -14,9 +14,15 @@ Required properties:
   - #gpio-cells : Must be 2. The first cell is the pin number and the
     second cell is used to specify optional parameters (currently unused).
 
-  - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
-    SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered
-    in Documentation/devicetree/bindings/regulator/regulator.txt
+  - power supplies for the device, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt, depending
+    on compatible:
+    - for wlf,wm1811 and wlf,wm8958:
+      AVDD1-supply, AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply,
+      DCVDD-supply, CPVDD-supply, SPKVDD1-supply, SPKVDD2-supply
+    - for wlf,wm8994:
+      AVDD1-supply, AVDD2-supply, DBVDD-supply, DCVDD-supply, CPVDD-supply,
+      SPKVDD1-supply, SPKVDD2-supply
 
 Optional properties:
 
@@ -73,11 +79,11 @@ wm8994: codec@1a {
 
 	lineout1-se;
 
+	AVDD1-supply = <&regulator>;
 	AVDD2-supply = <&regulator>;
 	CPVDD-supply = <&regulator>;
-	DBVDD1-supply = <&regulator>;
-	DBVDD2-supply = <&regulator>;
-	DBVDD3-supply = <&regulator>;
+	DBVDD-supply = <&regulator>;
+	DCVDD-supply = <&regulator>;
 	SPKVDD1-supply = <&regulator>;
 	SPKVDD2-supply = <&regulator>;
 };
Signature · 1 line
2.25.1
author maintainer
#157 lore raw

PATCH 155/206 atm: fix a memory leak of vcc->user_back

In reply to Sasha Levin

From: Cong Wang <[email protected]>

[ Upstream commit 8d9f73c0ad2f20e9fed5380de0a3097825859d03 ]

In lec_arp_clear_vccs() only entry->vcc is freed, but vcc could be installed on entry->recv_vcc too in lec_vcc_added().

This fixes the following memory leak:

unreferenced object 0xffff8880d9266b90 (size 16):
comm "atm2", pid 425, jiffies 4294907980 (age 23.488s) hex dump (first 16 bytes):

    00 00 00 00 00 00 00 00 00 00 00 00 6b 6b 6b a5  ............kkk.
  backtrace:
    [<(____ptrval____)>] kmem_cache_alloc_trace+0x10e/0x151
    [<(____ptrval____)>] lane_ioctl+0x4b3/0x569
    [<(____ptrval____)>] do_vcc_ioctl+0x1ea/0x236
    [<(____ptrval____)>] svc_ioctl+0x17d/0x198
    [<(____ptrval____)>] sock_do_ioctl+0x47/0x12f
    [<(____ptrval____)>] sock_ioctl+0x2f9/0x322
    [<(____ptrval____)>] vfs_ioctl+0x1e/0x2b
    [<(____ptrval____)>] ksys_ioctl+0x61/0x80
    [<(____ptrval____)>] __x64_sys_ioctl+0x16/0x19
    [<(____ptrval____)>] do_syscall_64+0x57/0x65
    [<(____ptrval____)>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
---
 net/atm/lec.c | 6 ++++++
 1 file changed, 6 insertions(+)
net/atm/lec.c +6 -0
index ad4f829193f05..5a6186b809874 100644
@@ -1270,6 +1270,12 @@ static void lec_arp_clear_vccs(struct lec_arp_table *entry)
 		entry->vcc = NULL;
 	}
 	if (entry->recv_vcc) {
+		struct atm_vcc *vcc = entry->recv_vcc;
+		struct lec_vcc_priv *vpriv = LEC_VCC_PRIV(vcc);
+
+		kfree(vpriv);
+		vcc->user_back = NULL;
+
 		entry->recv_vcc->push = entry->old_recv_push;
 		vcc_release_async(entry->recv_vcc, -EPIPE);
 		entry->recv_vcc = NULL;
Signature · 1 line
2.25.1
author maintainer
#158 lore raw

PATCH 156/206 perf parse-events: Fix memory leaks found on parse_events

In reply to Sasha Levin

From: Ian Rogers <[email protected]>

[ Upstream commit e8dfb81838b14f82521968343884665b996646ef ]

Fix a memory leak found by applying LLVM's libfuzzer on parse_events().

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Leo Yan <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
[ split from a larger patch, use zfree() ]
---
 tools/perf/util/parse-events.c | 1 +
 1 file changed, 1 insertion(+)
tools/perf/util/parse-events.c +1 -0
index 6d087d9acd5ee..cce96b05d24c9 100644
@@ -1287,6 +1287,7 @@ int parse_events_add_pmu(struct parse_events_state *parse_state,
 
 		list_for_each_entry_safe(pos, tmp, &config_terms, list) {
 			list_del_init(&pos->list);
+			zfree(&pos->val.str);
 			free(pos);
 		}
 		return -EINVAL;
Signature · 1 line
2.25.1
author maintainer
#159 lore raw

PATCH 157/206 perf mem2node: Avoid double free related to realloc

In reply to Sasha Levin

From: Ian Rogers <[email protected]>

[ Upstream commit 266150c94c69429cf6d18e130237224a047f5061 ]

Realloc of size zero is a free not an error, avoid this causing a double free. Caught by clang's address sanitizer:

==2634==ERROR: AddressSanitizer: attempting double-free on 0x6020000015f0 in thread T0:

    #0 0x5649659297fd in free llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:123:3
    #1 0x5649659e9251 in __zfree tools/lib/zalloc.c:13:2
    #2 0x564965c0f92c in mem2node__exit tools/perf/util/mem2node.c:114:2
    #3 0x564965a08b4c in perf_c2c__report tools/perf/builtin-c2c.c:2867:2
    #4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10
    #5 0x564965944348 in run_builtin tools/perf/perf.c:312:11
    #6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8
    #7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2
    #8 0x564965942e41 in main tools/perf/perf.c:538:3

0x6020000015f0 is located 0 bytes inside of 1-byte region [0x6020000015f0,0x6020000015f1) freed by thread T0 here:

    #0 0x564965929da3 in realloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
    #1 0x564965c0f55e in mem2node__init tools/perf/util/mem2node.c:97:16
    #2 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8
    #3 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10
    #4 0x564965944348 in run_builtin tools/perf/perf.c:312:11
    #5 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8
    #6 0x5649659440c4 in run_argv tools/perf/perf.c:408:2
    #7 0x564965942e41 in main tools/perf/perf.c:538:3

previously allocated by thread T0 here:

    #0 0x564965929c42 in calloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
    #1 0x5649659e9220 in zalloc tools/lib/zalloc.c:8:9
    #2 0x564965c0f32d in mem2node__init tools/perf/util/mem2node.c:61:12
    #3 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8
    #4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10
    #5 0x564965944348 in run_builtin tools/perf/perf.c:312:11
    #6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8
    #7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2
    #8 0x564965942e41 in main tools/perf/perf.c:538:3

v2: add a WARN_ON_ONCE when the free condition arises.

---
 tools/perf/util/mem2node.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/perf/util/mem2node.c +2 -1
index c6fd81c025863..81c5a2e438b7d 100644
@@ -1,5 +1,6 @@
 #include <errno.h>
 #include <inttypes.h>
+#include <asm/bug.h>
 #include <linux/bitmap.h>
 #include "mem2node.h"
 #include "util.h"
@@ -92,7 +93,7 @@ int mem2node__init(struct mem2node *map, struct perf_env *env)
 
 	/* Cut unused entries, due to merging. */
 	tmp_entries = realloc(entries, sizeof(*entries) * j);
-	if (tmp_entries)
+	if (tmp_entries || WARN_ON_ONCE(j == 0))
 		entries = tmp_entries;
 
 	for (i = 0; i < j; i++) {
Signature · 1 line
2.25.1
author maintainer
#160 lore raw

PATCH 158/206 power: supply: max17040: Correct voltage reading

In reply to Sasha Levin

From: Jonathan Bakker <[email protected]>

[ Upstream commit 0383024f811aa469df258039807810fc3793a105 ]

According to the datasheet available at (1), the bottom four bits are always zero and the actual voltage is 1.25x this value in mV. Since the kernel API specifies that voltages should be in uV, it should report 1250x the shifted value.

1) https://datasheets.maximintegrated.com/en/ds/MAX17040-MAX17041.pdf

---
 drivers/power/supply/max17040_battery.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/power/supply/max17040_battery.c +1 -1
index 33c40f79d23d5..2c35c13ad546f 100644
@@ -109,7 +109,7 @@ static void max17040_get_vcell(struct i2c_client *client)
 
 	vcell = max17040_read_reg(client, MAX17040_VCELL);
 
-	chip->vcell = vcell;
+	chip->vcell = (vcell >> 4) * 1250;
 }
 
 static void max17040_get_soc(struct i2c_client *client)
Signature · 1 line
2.25.1
author maintainer
#161 lore raw

PATCH 159/206 phy: samsung: s5pv210-usb2: Add delay after reset

In reply to Sasha Levin

From: Jonathan Bakker <[email protected]>

[ Upstream commit 05942b8c36c7eb5d3fc5e375d4b0d0c49562e85d ]

The USB phy takes some time to reset, so make sure we give it to it. The delay length was taken from the 4x12 phy driver.

This manifested in issues with the DWC2 driver since commit fe369e1826b3 ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.") where the endianness check would read the DWC ID as 0 due to the phy still resetting, resulting in the wrong endian mode being chosen.

---
 drivers/phy/samsung/phy-s5pv210-usb2.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/phy/samsung/phy-s5pv210-usb2.c +4 -0
index f6f72339bbc32..bb7fdf491c1c2 100644
@@ -142,6 +142,10 @@ static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
 		udelay(10);
 		rst &= ~rstbits;
 		writel(rst, drv->reg_phy + S5PV210_UPHYRST);
+		/* The following delay is necessary for the reset sequence to be
+		 * completed
+		 */
+		udelay(80);
 	} else {
 		pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
 		pwr |= phypwr;
Signature · 1 line
2.25.1
author maintainer
#162 lore raw

PATCH 160/206 Bluetooth: Handle Inquiry Cancel error after Inquiry Complete

In reply to Sasha Levin

From: Sonny Sasaka <[email protected]>

[ Upstream commit adf1d6926444029396861413aba8a0f2a805742a ]

After sending Inquiry Cancel command to the controller, it is possible that Inquiry Complete event comes before Inquiry Cancel command complete event. In this case the Inquiry Cancel command will have status of Command Disallowed since there is no Inquiry session to be cancelled. This case should not be treated as error, otherwise we can reach an inconsistent state.

Example of a btmon trace when this happened:

< HCI Command: Inquiry Cancel (0x01|0x0002) plen 0

Quoted 1 line

HCI Event: Inquiry Complete (0x01) plen 1

        Status: Success (0x00)
Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4

      Inquiry Cancel (0x01|0x0002) ncmd 1
        Status: Command Disallowed (0x0c)
---
 net/bluetooth/hci_event.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)
net/bluetooth/hci_event.c +17 -2
index ec6b3a87b3e7f..310622086f74b 100644
@@ -41,12 +41,27 @@
 
 /* Handle HCI Event packets */
 
-static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb)
+static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb,
+				  u8 *new_status)
 {
 	__u8 status = *((__u8 *) skb->data);
 
 	BT_DBG("%s status 0x%2.2x", hdev->name, status);
 
+	/* It is possible that we receive Inquiry Complete event right
+	 * before we receive Inquiry Cancel Command Complete event, in
+	 * which case the latter event should have status of Command
+	 * Disallowed (0x0c). This should not be treated as error, since
+	 * we actually achieve what Inquiry Cancel wants to achieve,
+	 * which is to end the last Inquiry session.
+	 */
+	if (status == 0x0c && !test_bit(HCI_INQUIRY, &hdev->flags)) {
+		bt_dev_warn(hdev, "Ignoring error of Inquiry Cancel command");
+		status = 0x00;
+	}
+
+	*new_status = status;
+
 	if (status)
 		return;
 
@@ -3039,7 +3054,7 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
 
 	switch (*opcode) {
 	case HCI_OP_INQUIRY_CANCEL:
-		hci_cc_inquiry_cancel(hdev, skb);
+		hci_cc_inquiry_cancel(hdev, skb, status);
 		break;
 
 	case HCI_OP_PERIODIC_INQ:
Signature · 1 line
2.25.1
author maintainer
#163 lore raw

PATCH 161/206 USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()

In reply to Sasha Levin

From: Tang Bin <[email protected]>

[ Upstream commit c856b4b0fdb5044bca4c0acf9a66f3b5cc01a37a ]

If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in mv_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here.

---
 drivers/usb/host/ehci-mv.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/usb/host/ehci-mv.c +2 -3
index de764459e05a6..4edcd7536a01b 100644
@@ -193,9 +193,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	hcd->regs = ehci_mv->op_regs;
 
 	hcd->irq = platform_get_irq(pdev, 0);
-	if (!hcd->irq) {
-		dev_err(&pdev->dev, "Cannot get irq.");
-		retval = -ENODEV;
+	if (hcd->irq < 0) {
+		retval = hcd->irq;
 		goto err_disable_clk;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#164 lore raw

PATCH 162/206 tipc: fix memory leak in service subscripting

In reply to Sasha Levin

From: Tuong Lien <[email protected]>

[ Upstream commit 0771d7df819284d46cf5cfb57698621b503ec17f ]

Upon receipt of a service subscription request from user via a topology connection, one 'sub' object will be allocated in kernel, so it will be able to send an event of the service if any to the user correspondingly then. Also, in case of any failure, the connection will be shutdown and all the pertaining 'sub' objects will be freed.

However, there is a race condition as follows resulting in memory leak:

       receive-work       connection        send-work
              |                |                |
        sub-1 |<------//-------|                |
        sub-2 |<------//-------|                |
              |                |<---------------| evt for sub-x
        sub-3 |<------//-------|                |
              :                :                :
              :                :                :
              |       /--------|                |
              |       |        * peer closed    |
              |       |        |                |
              |       |        |<-------X-------| evt for sub-y
              |       |        |<===============|
        sub-n |<------/        X    shutdown    |
    -> orphan |                                 |

That is, the 'receive-work' may get the last subscription request while the 'send-work' is shutting down the connection due to peer close.

We had a 'lock' on the connection, so the two actions cannot be carried out simultaneously. If the last subscription is allocated e.g. 'sub-n', before the 'send-work' closes the connection, there will be no issue at all, the 'sub' objects will be freed. In contrast the last subscription will become orphan since the connection was closed, and we released all references.

This commit fixes the issue by simply adding one test if the connection remains in 'connected' state right after we obtain the connection lock, then a subscription object can be created as usual, otherwise we ignore it.

---
 net/tipc/topsrv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/tipc/topsrv.c +3 -1
index 41f4464ac6cc5..ec9a7137d2677 100644
@@ -407,7 +407,9 @@ static int tipc_conn_rcv_from_sock(struct tipc_conn *con)
 		return -EWOULDBLOCK;
 	if (ret == sizeof(s)) {
 		read_lock_bh(&sk->sk_callback_lock);
-		ret = tipc_conn_rcv_sub(srv, con, &s);
+		/* RACE: the connection can be closed in the meantime */
+		if (likely(connected(con)))
+			ret = tipc_conn_rcv_sub(srv, con, &s);
 		read_unlock_bh(&sk->sk_callback_lock);
 		if (!ret)
 			return 0;
Signature · 1 line
2.25.1
author maintainer
#165 lore raw

PATCH 163/206 tty: serial: samsung: Correct clock selection logic

In reply to Sasha Levin

From: Jonathan Bakker <[email protected]>

[ Upstream commit 7d31676a8d91dd18e08853efd1cb26961a38c6a6 ]

Some variants of the samsung tty driver can pick which clock to use for their baud rate generation. In the DT conversion, a default clock was selected to be used if a specific one wasn't assigned and then a comparison of which clock rate worked better was done. Unfortunately, the comparison was implemented in such a way that only the default clock was ever actually compared. Fix this by iterating through all possible clocks, except when a specific clock has already been picked via clk_sel (which is only possible via board files).

---
 drivers/tty/serial/samsung.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/tty/serial/samsung.c +4 -4
index fcb89bf2524d1..1528a7ba2bf4d 100644
@@ -1187,14 +1187,14 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
 	struct s3c24xx_uart_info *info = ourport->info;
 	struct clk *clk;
 	unsigned long rate;
-	unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
+	unsigned int cnt, baud, quot, best_quot = 0;
 	char clkname[MAX_CLK_NAME_LENGTH];
 	int calc_deviation, deviation = (1 << 30) - 1;
 
-	clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
-			ourport->info->def_clk_sel;
 	for (cnt = 0; cnt < info->num_clks; cnt++) {
-		if (!(clk_sel & (1 << cnt)))
+		/* Keep selected clock if provided */
+		if (ourport->cfg->clk_sel &&
+			!(ourport->cfg->clk_sel & (1 << cnt)))
 			continue;
 
 		sprintf(clkname, "clk_uart_baud%d", cnt);
Signature · 1 line
2.25.1
author maintainer
#166 lore raw

PATCH 164/206 ALSA: hda: Fix potential race in unsol event handler

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit c637fa151259c0f74665fde7cba5b7eac1417ae5 ]

The unsol event handling code has a loop retrieving the read/write indices and the arrays without locking while the append to the array may happen concurrently. This may lead to some inconsistency. Although there hasn't been any proof of this bad results, it's still safer to protect the racy accesses.

This patch adds the spinlock protection around the unsol handling loop for addressing it. Here we take bus->reg_lock as the writer side snd_hdac_bus_queue_event() is also protected by that lock.

---
 sound/hda/hdac_bus.c | 4 ++++
 1 file changed, 4 insertions(+)
sound/hda/hdac_bus.c +4 -0
index 714a51721a313..ab9236e4c157e 100644
@@ -155,6 +155,7 @@ static void process_unsol_events(struct work_struct *work)
 	struct hdac_driver *drv;
 	unsigned int rp, caddr, res;
 
+	spin_lock_irq(&bus->reg_lock);
 	while (bus->unsol_rp != bus->unsol_wp) {
 		rp = (bus->unsol_rp + 1) % HDA_UNSOL_QUEUE_SIZE;
 		bus->unsol_rp = rp;
@@ -166,10 +167,13 @@ static void process_unsol_events(struct work_struct *work)
 		codec = bus->caddr_tbl[caddr & 0x0f];
 		if (!codec || !codec->dev.driver)
 			continue;
+		spin_unlock_irq(&bus->reg_lock);
 		drv = drv_to_hdac_driver(codec->dev.driver);
 		if (drv->unsol_event)
 			drv->unsol_event(codec, res);
+		spin_lock_irq(&bus->reg_lock);
 	}
+	spin_unlock_irq(&bus->reg_lock);
 }
 
 /**
Signature · 1 line
2.25.1
author maintainer
#167 lore raw

PATCH 165/206 powerpc/traps: Make unrecoverable NMIs die instead of panic

In reply to Sasha Levin

From: Nicholas Piggin <[email protected]>

[ Upstream commit 265d6e588d87194c2fe2d6c240247f0264e0c19b ]

System Reset and Machine Check interrupts that are not recoverable due to being nested or interrupting when RI=0 currently panic. This is not necessary, and can often just kill the current context and recover.

---
 arch/powerpc/kernel/traps.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/kernel/traps.c +3 -3
index d5f351f02c153..7781f0168ce8c 100644
@@ -430,11 +430,11 @@ out:
 #ifdef CONFIG_PPC_BOOK3S_64
 	BUG_ON(get_paca()->in_nmi == 0);
 	if (get_paca()->in_nmi > 1)
-		nmi_panic(regs, "Unrecoverable nested System Reset");
+		die("Unrecoverable nested System Reset", regs, SIGABRT);
 #endif
 	/* Must die if the interrupt is not recoverable */
 	if (!(regs->msr & MSR_RI))
-		nmi_panic(regs, "Unrecoverable System Reset");
+		die("Unrecoverable System Reset", regs, SIGABRT);
 
 	if (!nested)
 		nmi_exit();
@@ -775,7 +775,7 @@ void machine_check_exception(struct pt_regs *regs)
 
 	/* Must die if the interrupt is not recoverable */
 	if (!(regs->msr & MSR_RI))
-		nmi_panic(regs, "Unrecoverable Machine check");
+		die("Unrecoverable Machine check", regs, SIGBUS);
 
 	return;
 
Signature · 1 line
2.25.1
author maintainer
#168 lore raw

PATCH 166/206 fuse: don't check refcount after stealing page

In reply to Sasha Levin

From: Miklos Szeredi <[email protected]>

[ Upstream commit 32f98877c57bee6bc27f443a96f49678a2cd6a50 ]

page_count() is unstable. Unless there has been an RCU grace period between when the page was removed from the page cache and now, a speculative reference may exist from the page cache.

---
 fs/fuse/dev.c | 1 -
 1 file changed, 1 deletion(-)
fs/fuse/dev.c +0 -1
index 01e6ea11822bf..c51c9a6881e49 100644
@@ -831,7 +831,6 @@ static int fuse_check_page(struct page *page)
 {
 	if (page_mapcount(page) ||
 	    page->mapping != NULL ||
-	    page_count(page) != 1 ||
 	    (page->flags & PAGE_FLAGS_CHECK_AT_PREP &
 	     ~(1 << PG_locked |
 	       1 << PG_referenced |
Signature · 1 line
2.25.1
author maintainer
#169 lore raw

PATCH 167/206 USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit a7f40c233a6b0540d28743267560df9cfb571ca9 ]

The comparison of hcd->irq to less than zero for an error check will never be true because hcd->irq is an unsigned int. Fix this by assigning the int retval to the return of platform_get_irq and checking this for the -ve error condition and assigning hcd->irq to retval.

Addresses-Coverity: ("Unsigned compared against 0")

Fixes c856b4b0fdb5 ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()")
---
 drivers/usb/host/ehci-mv.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/usb/host/ehci-mv.c +3 -4
index 4edcd7536a01b..9d93e7441bbca 100644
@@ -192,11 +192,10 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(r);
 	hcd->regs = ehci_mv->op_regs;
 
-	hcd->irq = platform_get_irq(pdev, 0);
-	if (hcd->irq < 0) {
-		retval = hcd->irq;
+	retval = platform_get_irq(pdev, 0);
+	if (retval < 0)
 		goto err_disable_clk;
-	}
+	hcd->irq = retval;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
Signature · 1 line
2.25.1
author maintainer
#170 lore raw

PATCH 168/206 scsi: cxlflash: Fix error return code in cxlflash_probe()

In reply to Sasha Levin

From: Wei Yongjun <[email protected]>

[ Upstream commit d0b1e4a638d670a09f42017a3e567dc846931ba8 ]

Fix to return negative error code -ENOMEM from create_afu error handling case instead of 0, as done elsewhere in this function.

---
 drivers/scsi/cxlflash/main.c | 1 +
 1 file changed, 1 insertion(+)
drivers/scsi/cxlflash/main.c +1 -0
index f987c40c47a13..443813feaef47 100644
@@ -3749,6 +3749,7 @@ static int cxlflash_probe(struct pci_dev *pdev,
 	cfg->afu_cookie = cfg->ops->create_afu(pdev);
 	if (unlikely(!cfg->afu_cookie)) {
 		dev_err(dev, "%s: create_afu failed\n", __func__);
+		rc = -ENOMEM;
 		goto out_remove;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#171 lore raw

PATCH 169/206 arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register

In reply to Sasha Levin

From: Anshuman Khandual <[email protected]>

[ Upstream commit 1ed1b90a0594c8c9d31e8bb8be25a2b37717dc9e ]

ID_DFR0 based TraceFilt feature should not be exposed to guests. Hence lets drop it.

Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
Cc Marc Zyngier <[email protected]>
Cc Mark Rutland <[email protected]>
Cc James Morse <[email protected]>
Cc Suzuki K Poulose <[email protected]>
---
 arch/arm64/kernel/cpufeature.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/cpufeature.c +1 -1
index 095dec566275f..de6fa9b4abfa0 100644
@@ -300,7 +300,7 @@ static const struct arm64_ftr_bits ftr_id_pfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_dfr0[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
+	/* [31:28] TraceFilt */
 	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0xf),	/* PerfMon */
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 0),
Signature · 7 lines
2.25.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#172 lore raw

PATCH 170/206 e1000: Do not perform reset in reset_task if we are already down

In reply to Sasha Levin

From: Alexander Duyck <[email protected]>

[ Upstream commit 49ee3c2ab5234757bfb56a0b3a3cb422f427e3a3 ]

We are seeing a deadlock in e1000 down when NAPI is being disabled. Looking over the kernel function trace of the system it appears that the interface is being closed and then a reset is hitting which deadlocks the interface as the NAPI interface is already disabled.

To prevent this from happening I am disabling the reset task when __E1000_DOWN is already set. In addition code has been added so that we set the __E1000_DOWN while holding the __E1000_RESET flag in e1000_close in order to guarantee that the reset task will not run after we have started the close call.

---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/e1000/e1000_main.c +14 -4
index 47b867c64b147..195108858f38f 100644
@@ -542,8 +542,13 @@ void e1000_reinit_locked(struct e1000_adapter *adapter)
 	WARN_ON(in_interrupt());
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 		msleep(1);
-	e1000_down(adapter);
-	e1000_up(adapter);
+
+	/* only run the task if not already down */
+	if (!test_bit(__E1000_DOWN, &adapter->flags)) {
+		e1000_down(adapter);
+		e1000_up(adapter);
+	}
+
 	clear_bit(__E1000_RESETTING, &adapter->flags);
 }
 
@@ -1433,10 +1438,15 @@ int e1000_close(struct net_device *netdev)
 	struct e1000_hw *hw = &adapter->hw;
 	int count = E1000_CHECK_RESET_COUNT;
 
-	while (test_bit(__E1000_RESETTING, &adapter->flags) && count--)
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags) && count--)
 		usleep_range(10000, 20000);
 
-	WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+	WARN_ON(count < 0);
+
+	/* signal that we're down so that the reset task will no longer run */
+	set_bit(__E1000_DOWN, &adapter->flags);
+	clear_bit(__E1000_RESETTING, &adapter->flags);
+
 	e1000_down(adapter);
 	e1000_power_down_phy(adapter);
 	e1000_free_irq(adapter);
Signature · 1 line
2.25.1
author maintainer
#173 lore raw

PATCH 171/206 drm/nouveau/debugfs: fix runtime pm imbalance on error

In reply to Sasha Levin

From: Dinghao Liu <[email protected]>

[ Upstream commit 00583fbe8031f69bba8b0a9a861efb75fb7131af ]

pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

---
 drivers/gpu/drm/nouveau/nouveau_debugfs.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nouveau_debugfs.c +4 -1
index 9635704a1d864..4561a786fab07 100644
@@ -161,8 +161,11 @@ nouveau_debugfs_pstate_set(struct file *file, const char __user *ubuf,
 	}
 
 	ret = pm_runtime_get_sync(drm->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(drm->dev);
 		return ret;
+	}
+
 	ret = nvif_mthd(ctrl, NVIF_CONTROL_PSTATE_USER, &args, sizeof(args));
 	pm_runtime_put_autosuspend(drm->dev);
 	if (ret < 0)
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#174 lore raw

PATCH 172/206 drm/nouveau: fix runtime pm imbalance on error

In reply to Sasha Levin

From: Dinghao Liu <[email protected]>

[ Upstream commit d7372dfb3f7f1602b87e0663e8b8646da23ebca7 ]

pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

---
 drivers/gpu/drm/nouveau/nouveau_gem.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nouveau_gem.c +3 -1
index 791f970714ed6..a98fccb0d32f9 100644
@@ -82,8 +82,10 @@ nouveau_gem_object_open(struct drm_gem_object *gem, struct drm_file *file_priv)
 		return ret;
 
 	ret = pm_runtime_get_sync(dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev);
 		goto out;
+	}
 
 	ret = nouveau_vma_new(nvbo, &cli->vmm, &vma);
 	pm_runtime_mark_last_busy(dev);
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#175 lore raw

PATCH 173/206 drm/nouveau/dispnv50: fix runtime pm imbalance on error

In reply to Sasha Levin

From: Dinghao Liu <[email protected]>

[ Upstream commit dc455f4c888365595c0a13da445e092422d55b8d ]

pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

---
 drivers/gpu/drm/nouveau/dispnv50/disp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/dispnv50/disp.c +3 -1
index e06ea8c8184cb..1bb0a9f6fa730 100644
@@ -909,8 +909,10 @@ nv50_mstc_detect(struct drm_connector *connector, bool force)
 		return connector_status_disconnected;
 
 	ret = pm_runtime_get_sync(connector->dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(connector->dev->dev);
 		return connector_status_disconnected;
+	}
 
 	conn_status = drm_dp_mst_detect_port(connector, mstc->port->mgr,
 					     mstc->port);
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#176 lore raw

PATCH 174/206 printk: handle blank console arguments passed in.

In reply to Sasha Levin

From: Shreyas Joshi <[email protected]>

[ Upstream commit 48021f98130880dd74286459a1ef48b5e9bc374f ]

If uboot passes a blank string to console_setup then it results in a trashed memory. Ultimately, the kernel crashes during freeing up the memory.

This fix checks if there is a blank parameter being passed to console_setup from uboot. In case it detects that the console parameter is blank then it doesn't setup the serial device and it gracefully exits.

---
 kernel/printk/printk.c | 3 +++
 1 file changed, 3 insertions(+)
kernel/printk/printk.c +3 -0
index 3cb0e5b479ff3..cf272aba362be 100644
@@ -2148,6 +2148,9 @@ static int __init console_setup(char *str)
 	char *s, *options, *brl_options = NULL;
 	int idx;
 
+	if (str[0] == 0)
+		return 1;
+
 	if (_braille_console_setup(&str, &brl_options))
 		return 1;
 
Signature · 1 line
2.25.1
author maintainer
#177 lore raw

PATCH 175/206 usb: dwc3: Increase timeout for CmdAct cleared by device controller

In reply to Sasha Levin

From: Yu Chen <[email protected]>

[ Upstream commit 1c0e69ae1b9f9004fd72978612ae3463791edc56 ]

If the SS PHY is in P3, there is no pipe_clk, HW may use suspend_clk for function, as suspend_clk is slow so EP command need more time to complete, e.g, imx8M suspend_clk is 32K, set ep configuration will take about 380us per below trace time stamp(44.286278 - 44.285897 = 0.000381):

configfs_acm.sh-822 [000] d..1 44.285896: dwc3_writel: addr
000000006d59aae1 value 00000401
configfs_acm.sh-822 [000] d..1 44.285897: dwc3_readl: addr
000000006d59aae1 value 00000401
... ...
configfs_acm.sh-822 [000] d..1 44.286278: dwc3_readl: addr
000000006d59aae1 value 00000001
configfs_acm.sh-822 [000] d..1 44.286279: dwc3_gadget_ep_cmd:
ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000 00000500 00000000 --> status: Successful

This was originally found on Hisilicon Kirin Soc that need more time for the device controller to clear the CmdAct of DEPCMD.

---
 drivers/usb/dwc3/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/dwc3/gadget.c +1 -1
index 7bf2573dd459e..37cc3fd7c3cad 100644
@@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 {
 	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 	struct dwc3		*dwc = dep->dwc;
-	u32			timeout = 1000;
+	u32			timeout = 5000;
 	u32			saved_config = 0;
 	u32			reg;
 
Signature · 1 line
2.25.1
author maintainer
#178 lore raw

PATCH 176/206 btrfs: don't force read-only after error in drop snapshot

In reply to Sasha Levin

From: David Sterba <[email protected]>

[ Upstream commit 7c09c03091ac562ddca2b393e5d65c1d37da79f1 ]

Deleting a subvolume on a full filesystem leads to ENOSPC followed by a forced read-only. This is not a transaction abort and the filesystem is otherwise ok, so the error should be just propagated to the callers.

This is caused by unnecessary call to btrfs_handle_fs_error for all errors, except EAGAIN. This does not make sense as the standard transaction abort mechanism is in btrfs_drop_snapshot so all relevant failures are handled.

Originally in commit cb1b69f4508a ("Btrfs: forced readonly when btrfs_drop_snapshot() fails") there was no return value at all, so the btrfs_std_error made some sense but once the error handling and propagation has been implemented we don't need it anymore.

---
 fs/btrfs/extent-tree.c | 2 --
 1 file changed, 2 deletions(-)
fs/btrfs/extent-tree.c +0 -2
index ec3aa76d19b7f..be0776eba7a08 100644
@@ -9099,8 +9099,6 @@ out:
 	 */
 	if (!for_reloc && !root_dropped)
 		btrfs_add_dead_root(root);
-	if (err && err != -EAGAIN)
-		btrfs_handle_fs_error(fs_info, err, NULL);
 	return err;
 }
 
Signature · 1 line
2.25.1
author maintainer
#179 lore raw

PATCH 177/206 vfio/pci: fix memory leaks of eventfd ctx

In reply to Sasha Levin

From: Qian Cai <[email protected]>

[ Upstream commit 1518ac272e789cae8c555d69951b032a275b7602 ]

Finished a qemu-kvm (-device vfio-pci,host=0001:01:00.0) triggers a few memory leaks after a while because vfio_pci_set_ctx_trigger_single() calls eventfd_ctx_fdget() without the matching eventfd_ctx_put() later. Fix it by calling eventfd_ctx_put() for those memory in vfio_pci_release() before vfio_device_release().

unreferenced object 0xebff008981cc2b00 (size 128):
comm "qemu-kvm", pid 4043, jiffies 4294994816 (age 9796.310s) hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
backtrace:

    [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c
    [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4
    [<000000005fcec025>] do_eventfd+0x54/0x1ac
    [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44
    [<00000000b819758c>] do_el0_svc+0x128/0x1dc
    [<00000000b244e810>] el0_sync_handler+0xd0/0x268
    [<00000000d495ef94>] el0_sync+0x164/0x180

unreferenced object 0x29ff008981cc4180 (size 128):
comm "qemu-kvm", pid 4043, jiffies 4294994818 (age 9796.290s) hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
backtrace:

    [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c
    [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4
    [<000000005fcec025>] do_eventfd+0x54/0x1ac
    [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44
    [<00000000b819758c>] do_el0_svc+0x128/0x1dc
    [<00000000b244e810>] el0_sync_handler+0xd0/0x268
    [<00000000d495ef94>] el0_sync+0x164/0x180
---
 drivers/vfio/pci/vfio_pci.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/vfio/pci/vfio_pci.c +4 -0
index 9f72a6ee13b53..86cd8bdfa9f28 100644
@@ -409,6 +409,10 @@ static void vfio_pci_release(void *device_data)
 	if (!(--vdev->refcnt)) {
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
+		if (vdev->err_trigger)
+			eventfd_ctx_put(vdev->err_trigger);
+		if (vdev->req_trigger)
+			eventfd_ctx_put(vdev->req_trigger);
 	}
 
 	mutex_unlock(&driver_lock);
Signature · 1 line
2.25.1
author maintainer
#180 lore raw

PATCH 178/206 perf parse-events: Fix incorrect conversion of 'if () free()' to 'zfree()'

In reply to Sasha Levin

From: Arnaldo Carvalho de Melo <[email protected]>

[ Upstream commit 7fcdccd4237724931d9773d1e3039bfe053a6f52 ]

When applying a patch by Ian I incorrectly converted to zfree() an expression that involved testing some other struct member, not the one being freed, which lead to bugs reproduceable by:

  $ perf stat -e i/bs,tsc,L2/o sleep 1
  WARNING: multiple event parsing errors
  Segmentation fault (core dumped)
  $

Fix it by restoring the test for pos->free_str before freeing pos->val.str, but continue using zfree(&pos->val.str) to set that member to NULL after freeing it.

Fixes e8dfb81838b1 ("perf parse-events: Fix memory leaks found on parse_events")
Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Leo Yan <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
---
 tools/perf/util/parse-events.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/perf/util/parse-events.c +2 -1
index cce96b05d24c9..426f1984c143e 100644
@@ -1287,7 +1287,8 @@ int parse_events_add_pmu(struct parse_events_state *parse_state,
 
 		list_for_each_entry_safe(pos, tmp, &config_terms, list) {
 			list_del_init(&pos->list);
-			zfree(&pos->val.str);
+			if (pos->free_str)
+				zfree(&pos->val.str);
 			free(pos);
 		}
 		return -EINVAL;
Signature · 1 line
2.25.1
author maintainer
#181 lore raw

PATCH 179/206 perf evsel: Fix 2 memory leaks

In reply to Sasha Levin

From: Ian Rogers <[email protected]>

[ Upstream commit 3efc899d9afb3d03604f191a0be9669eabbfc4aa ]

If allocated, perf_pkg_mask and metric_events need freeing.

---
 tools/perf/util/evsel.c | 2 ++
 1 file changed, 2 insertions(+)
tools/perf/util/evsel.c +2 -0
index e8586957562b3..1b7b6244c8cfe 100644
@@ -1291,6 +1291,8 @@ void perf_evsel__exit(struct perf_evsel *evsel)
 	zfree(&evsel->group_name);
 	zfree(&evsel->name);
 	zfree(&evsel->pmu_name);
+	zfree(&evsel->per_pkg_mask);
+	zfree(&evsel->metric_events);
 	perf_evsel__object.fini(evsel);
 }
 
Signature · 1 line
2.25.1
author maintainer
#182 lore raw

PATCH 180/206 perf trace: Fix the selection for architectures to generate the errno name tables

In reply to Sasha Levin

From: Ian Rogers <[email protected]>

[ Upstream commit 7597ce89b3ed239f7a3408b930d2a6c7a4c938a1 ]

Make the architecture test directory agree with the code comment.

Committer notes:

This was split from a larger patch.

The code was assuming the developer always worked from tools/perf/, so make sure we do the test -d having $toolsdir/perf/arch/$arch, to match the intent expressed in the comment, just above that loop.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexios Zavras <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Igor Lubashev <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Nick Desaulniers <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Wei Li <[email protected]>
---
 tools/perf/trace/beauty/arch_errno_names.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/trace/beauty/arch_errno_names.sh +1 -1
index 22c9fc900c847..f8c44a85650be 100755
@@ -91,7 +91,7 @@ EoHEADER
 # in tools/perf/arch
 archlist=""
 for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | grep -v x86 | sort); do
-	test -d arch/$arch && archlist="$archlist $arch"
+	test -d $toolsdir/perf/arch/$arch && archlist="$archlist $arch"
 done
 
 for arch in x86 $archlist generic; do
Signature · 1 line
2.25.1
author maintainer
#183 lore raw

PATCH 181/206 perf stat: Fix duration_time value for higher intervals

In reply to Sasha Levin

From: Jiri Olsa <[email protected]>

[ Upstream commit ea9eb1f456a08c18feb485894185f7a4e31cc8a4 ]

Joakim reported wrong duration_time value for interval bigger than 4000 [1].

The problem is in the interval value we pass to update_stats function, which is typed as 'unsigned int' and overflows when we get over 2^32 (happens between intervals 4000 and 5000).

Retyping the passed value to unsigned long long.

[1] https://www.spinics.net/lists/linux-perf-users/msg11777.html

Fixes b90f1333ef08 ("perf stat: Update walltime_nsecs_stats in interval mode")
Cc Alexander Shishkin <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Michael Petlan <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/builtin-stat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/builtin-stat.c +1 -1
index 6aae10ff954c7..adabe9d4dc866 100644
@@ -422,7 +422,7 @@ static void process_interval(void)
 	}
 
 	init_stats(&walltime_nsecs_stats);
-	update_stats(&walltime_nsecs_stats, stat_config.interval * 1000000);
+	update_stats(&walltime_nsecs_stats, stat_config.interval * 1000000ULL);
 	print_counters(&rs, 0, NULL);
 }
 
Signature · 1 line
2.25.1
author maintainer
#184 lore raw

PATCH 182/206 perf util: Fix memory leak of prefix_if_not_in

In reply to Sasha Levin

From: Xie XiuQi <[email protected]>

[ Upstream commit 07e9a6f538cbeecaf5c55b6f2991416f873cdcbd ]

Need to free "str" before return when asprintf() failed to avoid memory leak.

---
 tools/perf/util/sort.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/sort.c +1 -1
index 46daa22b86e3b..85ff4f68adc00 100644
@@ -2690,7 +2690,7 @@ static char *prefix_if_not_in(const char *pre, char *str)
 		return str;
 
 	if (asprintf(&n, "%s,%s", pre, str) < 0)
-		return NULL;
+		n = NULL;
 
 	free(str);
 	return n;
Signature · 1 line
2.25.1
author maintainer
#185 lore raw

PATCH 183/206 perf metricgroup: Free metric_events on error

In reply to Sasha Levin

From: Ian Rogers <[email protected]>

[ Upstream commit a159e2fe89b4d1f9fb54b0ae418b961e239bf617 ]

Avoid a simple memory leak.

Cc Alexander Shishkin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Andrii Nakryiko <[email protected]>
Cc Cong Wang <[email protected]>
Cc Daniel Borkmann <[email protected]>
Cc Jin Yao <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc John Fastabend <[email protected]>
Cc John Garry <[email protected]>
Cc Kajol Jain <[email protected]>
Cc Kan Liang <[email protected]>
Cc Kim Phillips <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Martin KaFai Lau <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Song Liu <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Vince Weaver <[email protected]>
Cc Yonghong Song <[email protected]>
Cc kp singh <[email protected]>
---
 tools/perf/util/metricgroup.c | 3 +++
 1 file changed, 3 insertions(+)
tools/perf/util/metricgroup.c +3 -0
index 8b3dafe3fac3a..6dcc6e1182a54 100644
@@ -171,6 +171,7 @@ static int metricgroup__setup_events(struct list_head *groups,
 		if (!evsel) {
 			pr_debug("Cannot resolve %s: %s\n",
 					eg->metric_name, eg->metric_expr);
+			free(metric_events);
 			continue;
 		}
 		for (i = 0; i < eg->idnum; i++)
@@ -178,11 +179,13 @@ static int metricgroup__setup_events(struct list_head *groups,
 		me = metricgroup__lookup(metric_events_list, evsel, true);
 		if (!me) {
 			ret = -ENOMEM;
+			free(metric_events);
 			break;
 		}
 		expr = malloc(sizeof(struct metric_expr));
 		if (!expr) {
 			ret = -ENOMEM;
+			free(metric_events);
 			break;
 		}
 		expr->metric_expr = eg->metric_expr;
Signature · 1 line
2.25.1
author maintainer
#186 lore raw

PATCH 184/206 perf kcore_copy: Fix module map when there are no modules loaded

In reply to Sasha Levin

From: Adrian Hunter <[email protected]>

[ Upstream commit 61f82e3fb697a8e85f22fdec786528af73dc36d1 ]

In the absence of any modules, no "modules" map is created, but there are other executable pages to map, due to eBPF JIT, kprobe or ftrace. Map them by recognizing that the first "module" symbol is not necessarily from a module, and adjust the map accordingly.

Cc Alexander Shishkin <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Leo Yan <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Masami Hiramatsu <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Steven Rostedt (VMware) <[email protected]>
---
 tools/perf/util/symbol-elf.c | 7 +++++++
 1 file changed, 7 insertions(+)
tools/perf/util/symbol-elf.c +7 -0
index a701a8a48f005..166c621e02235 100644
@@ -1421,6 +1421,7 @@ struct kcore_copy_info {
 	u64 first_symbol;
 	u64 last_symbol;
 	u64 first_module;
+	u64 first_module_symbol;
 	u64 last_module_symbol;
 	size_t phnum;
 	struct list_head phdrs;
@@ -1497,6 +1498,8 @@ static int kcore_copy__process_kallsyms(void *arg, const char *name, char type,
 		return 0;
 
 	if (strchr(name, '[')) {
+		if (!kci->first_module_symbol || start < kci->first_module_symbol)
+			kci->first_module_symbol = start;
 		if (start > kci->last_module_symbol)
 			kci->last_module_symbol = start;
 		return 0;
@@ -1694,6 +1697,10 @@ static int kcore_copy__calc_maps(struct kcore_copy_info *kci, const char *dir,
 		kci->etext += page_size;
 	}
 
+	if (kci->first_module_symbol &&
+	    (!kci->first_module || kci->first_module_symbol < kci->first_module))
+		kci->first_module = kci->first_module_symbol;
+
 	kci->first_module = round_down(kci->first_module, page_size);
 
 	if (kci->last_module_symbol) {
Signature · 1 line
2.25.1
author maintainer
#187 lore raw

PATCH 185/206 ASoC: img-i2s-out: Fix runtime PM imbalance on error

In reply to Sasha Levin

From: Dinghao Liu <[email protected]>

[ Upstream commit 65bd91dd6957390c42a0491b9622cf31a2cdb140 ]

pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

---
 sound/soc/img/img-i2s-out.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
sound/soc/img/img-i2s-out.c +6 -2
index fc2d1dac63339..798ab579564cb 100644
@@ -350,8 +350,10 @@ static int img_i2s_out_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 	chan_control_mask = IMG_I2S_OUT_CHAN_CTL_CLKT_MASK;
 
 	ret = pm_runtime_get_sync(i2s->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(i2s->dev);
 		return ret;
+	}
 
 	img_i2s_out_disable(i2s);
 
@@ -491,8 +493,10 @@ static int img_i2s_out_probe(struct platform_device *pdev)
 			goto err_pm_disable;
 	}
 	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
 		goto err_suspend;
+	}
 
 	reg = IMG_I2S_OUT_CTL_FRM_SIZE_MASK;
 	img_i2s_out_writel(i2s, reg, IMG_I2S_OUT_CTL);
Signature · 1 line
2.25.1
author maintainer
#188 lore raw

PATCH 186/206 wlcore: fix runtime pm imbalance in wl1271_tx_work

In reply to Sasha Levin

From: Dinghao Liu <[email protected]>

[ Upstream commit 9604617e998b49f7695fea1479ed82421ef8c9f0 ]

There are two error handling paths in this functon. When wlcore_tx_work_locked() returns an error code, we should decrease the runtime PM usage counter the same way as the error handling path beginning from pm_runtime_get_sync().

---
 drivers/net/wireless/ti/wlcore/tx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/ti/wlcore/tx.c +1 -0
index b6e19c2d66b0a..250bcbf4ea2f2 100644
@@ -877,6 +877,7 @@ void wl1271_tx_work(struct work_struct *work)
 
 	ret = wlcore_tx_work_locked(wl);
 	if (ret < 0) {
+		pm_runtime_put_noidle(wl->dev);
 		wl12xx_queue_recovery_work(wl);
 		goto out;
 	}
Signature · 1 line
2.25.1
author maintainer
#189 lore raw

PATCH 187/206 wlcore: fix runtime pm imbalance in wlcore_regdomain_config

In reply to Sasha Levin

From: Dinghao Liu <[email protected]>

[ Upstream commit 282a04bf1d8029eb98585cb5db3fd70fe8bc91f7 ]

pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

---
 drivers/net/wireless/ti/wlcore/main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/wireless/ti/wlcore/main.c +3 -1
index 2ca5658bbc2ab..43c7b37dec0c9 100644
@@ -3671,8 +3671,10 @@ void wlcore_regdomain_config(struct wl1271 *wl)
 		goto out;
 
 	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(wl->dev);
 		goto out;
+	}
 
 	ret = wlcore_cmd_regdomain_config_locked(wl);
 	if (ret < 0) {
Signature · 1 line
2.25.1
author maintainer
#190 lore raw

PATCH 188/206 mtd: rawnand: omap_elm: Fix runtime PM imbalance on error

In reply to Sasha Levin

From: Dinghao Liu <[email protected]>

[ Upstream commit 37f7212148cf1d796135cdf8d0c7fee13067674b ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

---
 drivers/mtd/nand/raw/omap_elm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mtd/nand/raw/omap_elm.c +1 -0
index a3f32f939cc17..6736777a41567 100644
@@ -421,6 +421,7 @@ static int elm_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	if (pm_runtime_get_sync(&pdev->dev) < 0) {
 		ret = -EINVAL;
+		pm_runtime_put_sync(&pdev->dev);
 		pm_runtime_disable(&pdev->dev);
 		dev_err(&pdev->dev, "can't enable clock\n");
 		return ret;
Signature · 1 line
2.25.1
author maintainer
#191 lore raw

PATCH 189/206 PCI: tegra: Fix runtime PM imbalance on error

In reply to Sasha Levin

From: Dinghao Liu <[email protected]>

[ Upstream commit fcee90cdf6f3a3a371add04d41528d5ba9c3b411 ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

Also, call pm_runtime_disable() when pm_runtime_get_sync() returns an error code.

---
 drivers/pci/controller/pci-tegra.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/pci/controller/pci-tegra.c +1 -2
index 6f86583605a46..097c02197ec8f 100644
@@ -2400,7 +2400,7 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 	err = pm_runtime_get_sync(pcie->dev);
 	if (err < 0) {
 		dev_err(dev, "fail to enable pcie controller: %d\n", err);
-		goto teardown_msi;
+		goto pm_runtime_put;
 	}
 
 	err = tegra_pcie_request_resources(pcie);
@@ -2440,7 +2440,6 @@ free_resources:
 pm_runtime_put:
 	pm_runtime_put_sync(pcie->dev);
 	pm_runtime_disable(pcie->dev);
-teardown_msi:
 	tegra_pcie_msi_teardown(pcie);
 put_resources:
 	tegra_pcie_put_resources(pcie);
Signature · 1 line
2.25.1
author maintainer
#192 lore raw

PATCH 190/206 ceph: fix potential race in ceph_check_caps

In reply to Sasha Levin

From: Jeff Layton <[email protected]>

[ Upstream commit dc3da0461cc4b76f2d0c5b12247fcb3b520edbbf ]

Nothing ensures that session will still be valid by the time we dereference the pointer. Take and put a reference.

In principle, we should always be able to get a reference here, but throw a warning if that's ever not the case.

---
 fs/ceph/caps.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
fs/ceph/caps.c +13 -1
index a2d4eed27f804..c0dbf8b7762b4 100644
@@ -2015,12 +2015,24 @@ ack:
 			if (mutex_trylock(&session->s_mutex) == 0) {
 				dout("inverting session/ino locks on %p\n",
 				     session);
+				session = ceph_get_mds_session(session);
 				spin_unlock(&ci->i_ceph_lock);
 				if (took_snap_rwsem) {
 					up_read(&mdsc->snap_rwsem);
 					took_snap_rwsem = 0;
 				}
-				mutex_lock(&session->s_mutex);
+				if (session) {
+					mutex_lock(&session->s_mutex);
+					ceph_put_mds_session(session);
+				} else {
+					/*
+					 * Because we take the reference while
+					 * holding the i_ceph_lock, it should
+					 * never be NULL. Throw a warning if it
+					 * ever is.
+					 */
+					WARN_ON_ONCE(true);
+				}
 				goto retry;
 			}
 		}
Signature · 1 line
2.25.1
author maintainer
#193 lore raw

PATCH 191/206 mm/swap_state: fix a data race in swapin_nr_pages

In reply to Sasha Levin

From: Qian Cai <[email protected]>

[ Upstream commit d6c1f098f2a7ba62627c9bc17cda28f534ef9e4a ]

"prev_offset" is a static variable in swapin_nr_pages() that can be accessed concurrently with only mmap_sem held in read mode as noticed by KCSAN,

 BUG: KCSAN: data-race in swap_cluster_readahead / swap_cluster_readahead

write to 0xffffffff92763830 of 8 bytes by task 14795 on cpu 17:

  swap_cluster_readahead+0x2a6/0x5e0
  swapin_readahead+0x92/0x8dc
  do_swap_page+0x49b/0xf20
  __handle_mm_fault+0xcfb/0xd70
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x715
  page_fault+0x34/0x40

1 lock held by (dnf)/14795:
#0: ffff897bd2e98858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715 do_user_addr_fault at arch/x86/mm/fault.c:1405
(inlined by) do_page_fault at arch/x86/mm/fault.c:1535

 irq event stamp: 83493
 count_memcg_event_mm+0x1a6/0x270
 count_memcg_event_mm+0x119/0x270
 __do_softirq+0x365/0x589
 irq_exit+0xa2/0xc0

read to 0xffffffff92763830 of 8 bytes by task 1 on cpu 22:

  swap_cluster_readahead+0xfd/0x5e0
  swapin_readahead+0x92/0x8dc
  do_swap_page+0x49b/0xf20
  __handle_mm_fault+0xcfb/0xd70
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x715
  page_fault+0x34/0x40

1 lock held by systemd/1:
#0: ffff897c38f14858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715

 irq event stamp: 43530289
 count_memcg_event_mm+0x1a6/0x270
 count_memcg_event_mm+0x119/0x270
 __do_softirq+0x365/0x589
 irq_exit+0xa2/0xc0
---
 mm/swap_state.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
mm/swap_state.c +3 -2
index 09731f4174c7e..3febffe0fca4a 100644
@@ -537,10 +537,11 @@ static unsigned long swapin_nr_pages(unsigned long offset)
 		return 1;
 
 	hits = atomic_xchg(&swapin_readahead_hits, 0);
-	pages = __swapin_nr_pages(prev_offset, offset, hits, max_pages,
+	pages = __swapin_nr_pages(READ_ONCE(prev_offset), offset, hits,
+				  max_pages,
 				  atomic_read(&last_readahead_pages));
 	if (!hits)
-		prev_offset = offset;
+		WRITE_ONCE(prev_offset, offset);
 	atomic_set(&last_readahead_pages, pages);
 
 	return pages;
Signature · 1 line
2.25.1
author maintainer
#194 lore raw

PATCH 192/206 rapidio: avoid data race between file operation callbacks and mport_cdev_add().

In reply to Sasha Levin

From: Madhuparna Bhowmik <[email protected]>

[ Upstream commit e1c3cdb26ab881b77486dc50370356a349077c74 ]

Fields of md(mport_dev) are set after cdev_device_add(). However, the file operation callbacks can be called after cdev_device_add() and therefore accesses to fields of md in the callbacks can race with the rest of the mport_cdev_add() function.

One such example is INIT_LIST_HEAD(&md->portwrites) in mport_cdev_add(), the list is initialised after cdev_device_add(). This can race with list_add_tail(&pw_filter->md_node,&md->portwrites) in rio_mport_add_pw_filter() which is called by unlocked_ioctl.

To avoid such data races use cdev_device_add() after initializing md.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/rapidio/devices/rio_mport_cdev.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/rapidio/devices/rio_mport_cdev.c +7 -7
index 5940780648e0f..f36a8a5261a13 100644
@@ -2385,13 +2385,6 @@ static struct mport_dev *mport_cdev_add(struct rio_mport *mport)
 	cdev_init(&md->cdev, &mport_fops);
 	md->cdev.owner = THIS_MODULE;
 
-	ret = cdev_device_add(&md->cdev, &md->dev);
-	if (ret) {
-		rmcd_error("Failed to register mport %d (err=%d)",
-		       mport->id, ret);
-		goto err_cdev;
-	}
-
 	INIT_LIST_HEAD(&md->doorbells);
 	spin_lock_init(&md->db_lock);
 	INIT_LIST_HEAD(&md->portwrites);
@@ -2411,6 +2404,13 @@ static struct mport_dev *mport_cdev_add(struct rio_mport *mport)
 #else
 	md->properties.transfer_mode |= RIO_TRANSFER_MODE_TRANSFER;
 #endif
+
+	ret = cdev_device_add(&md->cdev, &md->dev);
+	if (ret) {
+		rmcd_error("Failed to register mport %d (err=%d)",
+		       mport->id, ret);
+		goto err_cdev;
+	}
 	ret = rio_query_mport(mport, &attr);
 	if (!ret) {
 		md->properties.flags = attr.flags;
Signature · 1 line
2.25.1
author maintainer
#195 lore raw

PATCH 193/206 mtd: parser: cmdline: Support MTD names containing one or more colons

In reply to Sasha Levin

From: Boris Brezillon <[email protected]>

[ Upstream commit eb13fa0227417e84aecc3bd9c029d376e33474d3 ]

Looks like some drivers define MTD names with a colon in it, thus making mtdpart= parsing impossible. Let's fix the parser to gracefully handle that case: the last ':' in a partition definition sequence is considered instead of the first one.

---
 drivers/mtd/cmdlinepart.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
drivers/mtd/cmdlinepart.c +20 -3
index 3ea44cff9b759..c29205ee82e20 100644
@@ -231,12 +231,29 @@ static int mtdpart_setup_real(char *s)
 		struct cmdline_mtd_partition *this_mtd;
 		struct mtd_partition *parts;
 		int mtd_id_len, num_parts;
-		char *p, *mtd_id;
+		char *p, *mtd_id, *semicol;
+
+		/*
+		 * Replace the first ';' by a NULL char so strrchr can work
+		 * properly.
+		 */
+		semicol = strchr(s, ';');
+		if (semicol)
+			*semicol = '\0';
 
 		mtd_id = s;
 
-		/* fetch <mtd-id> */
-		p = strchr(s, ':');
+		/*
+		 * fetch <mtd-id>. We use strrchr to ignore all ':' that could
+		 * be present in the MTD name, only the last one is interpreted
+		 * as an <mtd-id>/<part-definition> separator.
+		 */
+		p = strrchr(s, ':');
+
+		/* Restore the ';' now. */
+		if (semicol)
+			*semicol = ';';
+
 		if (!p) {
 			pr_err("no mtd-id\n");
 			return -EINVAL;
Signature · 6 lines
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
author maintainer
#196 lore raw

PATCH 194/206 x86/speculation/mds: Mark mds_user_clear_cpu_buffers() __always_inline

In reply to Sasha Levin

From: Thomas Gleixner <[email protected]>

[ Upstream commit a7ef9ba986b5fae9d80f8a7b31db0423687efe4e ]

Prevent the compiler from uninlining and creating traceable/probable functions as this is invoked _after_ context tracking switched to CONTEXT_USER and rcu idle.

---
 arch/x86/include/asm/nospec-branch.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/include/asm/nospec-branch.h +2 -2
index e3f70c60e8ccd..62f9903544b59 100644
@@ -330,7 +330,7 @@ DECLARE_STATIC_KEY_FALSE(mds_idle_clear);
  * combination with microcode which triggers a CPU buffer flush when the
  * instruction is executed.
  */
-static inline void mds_clear_cpu_buffers(void)
+static __always_inline void mds_clear_cpu_buffers(void)
 {
 	static const u16 ds = __KERNEL_DS;
 
@@ -351,7 +351,7 @@ static inline void mds_clear_cpu_buffers(void)
  *
  * Clear CPU buffers if the corresponding static key is enabled
  */
-static inline void mds_user_clear_cpu_buffers(void)
+static __always_inline void mds_user_clear_cpu_buffers(void)
 {
 	if (static_branch_likely(&mds_user_clear))
 		mds_clear_cpu_buffers();
Signature · 1 line
2.25.1
author maintainer
#197 lore raw

PATCH 195/206 vfio/pci: Clear error and request eventfd ctx after releasing

In reply to Sasha Levin

From: Alex Williamson <[email protected]>

[ Upstream commit 5c5866c593bbd444d0339ede6a8fb5f14ff66d72 ]

The next use of the device will generate an underflow from the stale reference.

Cc Qian Cai <[email protected]>
Fixes 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx")
---
 drivers/vfio/pci/vfio_pci.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/vfio/pci/vfio_pci.c +6 -2
index 86cd8bdfa9f28..94fad366312f1 100644
@@ -409,10 +409,14 @@ static void vfio_pci_release(void *device_data)
 	if (!(--vdev->refcnt)) {
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
-		if (vdev->err_trigger)
+		if (vdev->err_trigger) {
 			eventfd_ctx_put(vdev->err_trigger);
-		if (vdev->req_trigger)
+			vdev->err_trigger = NULL;
+		}
+		if (vdev->req_trigger) {
 			eventfd_ctx_put(vdev->req_trigger);
+			vdev->req_trigger = NULL;
+		}
 	}
 
 	mutex_unlock(&driver_lock);
Signature · 1 line
2.25.1
author maintainer
#198 lore raw

PATCH 196/206 cifs: Fix double add page to memcg when cifs_readpages

In reply to Sasha Levin

From: Zhang Xiaoxu <[email protected]>

[ Upstream commit 95a3d8f3af9b0d63b43f221b630beaab9739d13a ]

When xfstests generic/451, there is an BUG at mm/memcontrol.c:
page:ffffea000560f2c0 refcount:2 mapcount:0 mapping:000000008544e0ea

       index:0xf
  mapping->aops:cifs_addr_ops dentry name:"tst-aio-dio-cycle-write.451"
  flags: 0x2fffff80000001(locked)
  raw: 002fffff80000001 ffffc90002023c50 ffffea0005280088 ffff88815cda0210
  raw: 000000000000000f 0000000000000000 00000002ffffffff ffff88817287d000
  page dumped because: VM_BUG_ON_PAGE(page->mem_cgroup)
  page->mem_cgroup:ffff88817287d000
  ------------[ cut here ]------------
  kernel BUG at mm/memcontrol.c:2659!
  invalid opcode: 0000 [#1] SMP
  CPU: 2 PID: 2038 Comm: xfs_io Not tainted 5.8.0-rc1 #44
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_
    073836-buildvm-ppc64le-16.ppc.4
  RIP: 0010:commit_charge+0x35/0x50
  Code: 0d 48 83 05 54 b2 02 05 01 48 89 77 38 c3 48 c7
        c6 78 4a ea ba 48 83 05 38 b2 02 05 01 e8 63 0d9
  RSP: 0018:ffffc90002023a50 EFLAGS: 00010202
  RAX: 0000000000000000 RBX: ffff88817287d000 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffff88817ac97ea0 RDI: ffff88817ac97ea0
  RBP: ffffea000560f2c0 R08: 0000000000000203 R09: 0000000000000005
  R10: 0000000000000030 R11: ffffc900020237a8 R12: 0000000000000000
  R13: 0000000000000001 R14: 0000000000000001 R15: ffff88815a1272c0
  FS:  00007f5071ab0800(0000) GS:ffff88817ac80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000055efcd5ca000 CR3: 000000015d312000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   mem_cgroup_charge+0x166/0x4f0
   __add_to_page_cache_locked+0x4a9/0x710
   add_to_page_cache_locked+0x15/0x20
   cifs_readpages+0x217/0x1270
   read_pages+0x29a/0x670
   page_cache_readahead_unbounded+0x24f/0x390
   __do_page_cache_readahead+0x3f/0x60
   ondemand_readahead+0x1f1/0x470
   page_cache_async_readahead+0x14c/0x170
   generic_file_buffered_read+0x5df/0x1100
   generic_file_read_iter+0x10c/0x1d0
   cifs_strict_readv+0x139/0x170
   new_sync_read+0x164/0x250
   __vfs_read+0x39/0x60
   vfs_read+0xb5/0x1e0
   ksys_pread64+0x85/0xf0
   __x64_sys_pread64+0x22/0x30
   do_syscall_64+0x69/0x150
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f5071fcb1af
  Code: Bad RIP value.
  RSP: 002b:00007ffde2cdb8e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011
  RAX: ffffffffffffffda RBX: 00007ffde2cdb990 RCX: 00007f5071fcb1af
  RDX: 0000000000001000 RSI: 000055efcd5ca000 RDI: 0000000000000003
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000001000 R11: 0000000000000293 R12: 0000000000000001
  R13: 000000000009f000 R14: 0000000000000000 R15: 0000000000001000
  Modules linked in:
  ---[ end trace 725fa14a3e1af65c ]---

Since commit 3fea5a499d57 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API") not cancel the page charge, the pages maybe double add to pagecache:
thread1 | thread2
cifs_readpages
readpages_get_pages
add_to_page_cache_locked(head,index=n)=0

                              | readpages_get_pages
                              | add_to_page_cache_locked(head,index=n+1)=0

add_to_page_cache_locked(head, index=n+1)=-EEXIST then, will next loop with list head page's index=n+1 and the page->mapping not NULL
readpages_get_pages add_to_page_cache_locked(head, index=n+1)
commit_charge
VM_BUG_ON_PAGE

So, we should not do the next loop when any page add to page cache failed.

---
 fs/cifs/file.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
fs/cifs/file.c +7 -4
index e78b52c582f18..5cb15649adb07 100644
@@ -3804,7 +3804,8 @@ readpages_get_pages(struct address_space *mapping, struct list_head *page_list,
 			break;
 
 		__SetPageLocked(page);
-		if (add_to_page_cache_locked(page, mapping, page->index, gfp)) {
+		rc = add_to_page_cache_locked(page, mapping, page->index, gfp);
+		if (rc) {
 			__ClearPageLocked(page);
 			break;
 		}
@@ -3820,6 +3821,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 	struct list_head *page_list, unsigned num_pages)
 {
 	int rc;
+	int err = 0;
 	struct list_head tmplist;
 	struct cifsFileInfo *open_file = file->private_data;
 	struct cifs_sb_info *cifs_sb = CIFS_FILE_SB(file);
@@ -3860,7 +3862,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 	 * the order of declining indexes. When we put the pages in
 	 * the rdata->pages, then we want them in increasing order.
 	 */
-	while (!list_empty(page_list)) {
+	while (!list_empty(page_list) && !err) {
 		unsigned int i, nr_pages, bytes, rsize;
 		loff_t offset;
 		struct page *page, *tpage;
@@ -3883,9 +3885,10 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 			return 0;
 		}
 
-		rc = readpages_get_pages(mapping, page_list, rsize, &tmplist,
+		nr_pages = 0;
+		err = readpages_get_pages(mapping, page_list, rsize, &tmplist,
 					 &nr_pages, &offset, &bytes);
-		if (rc) {
+		if (!nr_pages) {
 			add_credits_and_wake_if(server, credits, 0);
 			break;
 		}
Signature · 1 line
2.25.1
author maintainer
#199 lore raw

PATCH 197/206 nvme: fix possible deadlock when I/O is blocked

In reply to Sasha Levin

From: Sagi Grimberg <[email protected]>

[ Upstream commit 3b4b19721ec652ad2c4fe51dfbe5124212b5f581 ]

Revert fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns")

When adding a new namespace to the head disk (via nvme_mpath_set_live) we will see partition scan which triggers I/O on the mpath device node. This process will usually be triggered from the scan_work which holds the scan_lock. If I/O blocks (if we got ana change currently have only available paths but none are accessible) this can deadlock on the head disk bd_mutex as both partition scan I/O takes it, and head disk revalidation takes it to check for resize (also triggered from scan_work on a different path). See trace [1].

The mpath disk revalidation was originally added to detect online disk size change, but this is no longer needed since commit cb224c3af4df ("nvme: Convert to use set_capacity_revalidate_and_notify") which already updates resize info without unnecessarily revalidating the disk (the mpath disk doesn't even implement .revalidate_disk fop).

[1]:
--

kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds.
kernel:       Tainted: G           OE     5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u65:9   D    0   494      2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  schedule_preempt_disabled+0xe/0x10
kernel:  __mutex_lock.isra.0+0x182/0x4f0
kernel:  __mutex_lock_slowpath+0x13/0x20
kernel:  mutex_lock+0x2e/0x40
kernel:  revalidate_disk+0x63/0xa0
kernel:  __nvme_revalidate_disk+0xfe/0x110 [nvme_core]
kernel:  nvme_revalidate_disk+0xa4/0x160 [nvme_core]
kernel:  ? evict+0x14c/0x1b0
kernel:  revalidate_disk+0x2b/0xa0
kernel:  nvme_validate_ns+0x49/0x940 [nvme_core]
kernel:  ? blk_mq_free_request+0xd2/0x100
kernel:  ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core]
kernel:  nvme_scan_work+0x24f/0x380 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x249/0x400
kernel:  kthread+0x104/0x140
kernel:  ? process_one_work+0x380/0x380
kernel:  ? kthread_park+0x80/0x80
kernel:  ret_from_fork+0x1f/0x40
...
kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds.
kernel:       Tainted: G           OE     5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u65:1   D    0  2630      2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  io_schedule+0x16/0x40
kernel:  do_read_cache_page+0x438/0x830
kernel:  ? __switch_to_asm+0x34/0x70
kernel:  ? file_fdatawait_range+0x30/0x30
kernel:  read_cache_page+0x12/0x20
kernel:  read_dev_sector+0x27/0xc0
kernel:  read_lba+0xc1/0x220
kernel:  ? kmem_cache_alloc_trace+0x19c/0x230
kernel:  efi_partition+0x1e6/0x708
kernel:  ? vsnprintf+0x39e/0x4e0
kernel:  ? snprintf+0x49/0x60
kernel:  check_partition+0x154/0x244
kernel:  rescan_partitions+0xae/0x280
kernel:  __blkdev_get+0x40f/0x560
kernel:  blkdev_get+0x3d/0x140
kernel:  __device_add_disk+0x388/0x480
kernel:  device_add_disk+0x13/0x20
kernel:  nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel:  nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel:  nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel:  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel:  ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core]
kernel:  nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel:  nvme_validate_ns+0x396/0x940 [nvme_core]
kernel:  ? blk_mq_free_request+0xd2/0x100
kernel:  nvme_scan_work+0x24f/0x380 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x249/0x400
kernel:  kthread+0x104/0x140
kernel:  ? process_one_work+0x380/0x380
kernel:  ? kthread_park+0x80/0x80
kernel:  ret_from_fork+0x1f/0x40

--

Fixes fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk

in nvme_validate_ns")

---
 drivers/nvme/host/core.c | 1 -
 1 file changed, 1 deletion(-)
drivers/nvme/host/core.c +0 -1
index faa7feebb6095..84fcfcdb8ba5f 100644
@@ -1599,7 +1599,6 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
 	if (ns->head->disk) {
 		nvme_update_disk_info(ns->head->disk, ns, id);
 		blk_queue_stack_limits(ns->head->disk->queue, ns->queue);
-		revalidate_disk(ns->head->disk);
 	}
 #endif
 }
Signature · 1 line
2.25.1
author maintainer
#200 lore raw

PATCH 198/206 scsi: libfc: Handling of extra kref

In reply to Sasha Levin

From: Javed Hasan <[email protected]>

[ Upstream commit 71f2bf85e90d938d4a9ef9dd9bfa8d9b0b6a03f7 ]

Handling of extra kref which is done by lookup table in case rdata is already present in list.

This issue was leading to memory leak. Trace from KMEMLEAK tool:

unreferenced object 0xffff8888259e8780 (size 512):

    comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s)
    hex dump (first 32 bytes):
    58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
    01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
  backtrace:
	[<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
	[<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
	[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
	[<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
	[<00000000e0eb6893>] process_one_work+0x382/0x6c0
	[<000000002dfd9e21>] worker_thread+0x57/0x5c0
	[<00000000b648204f>] kthread+0x1a0/0x1c0
	[<0000000072f5ab20>] ret_from_fork+0x35/0x40
	[<000000001d5c05d8>] 0xffffffffffffffff

Below is the log sequence which leads to memory leak. Here we get the nested "Received PLOGI request" for same port and this request leads to call the fc_rport_create() twice for the same rport.

kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in INIT state
kernel: host1: rport fffce5: Port is Ready
kernel: host1: rport fffce5: Received PRLI request while in state Ready
kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host1: rport fffce5: Received LOGO request while in state Ready
kernel: host1: rport fffce5: Delete port
kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy

---
 drivers/scsi/libfc/fc_rport.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/libfc/fc_rport.c +3 -1
index 90a748551ede5..f39d2d62b002f 100644
@@ -145,8 +145,10 @@ struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, u32 port_id)
 	lockdep_assert_held(&lport->disc.disc_mutex);
 
 	rdata = fc_rport_lookup(lport, port_id);
-	if (rdata)
+	if (rdata) {
+		kref_put(&rdata->kref, fc_rport_destroy);
 		return rdata;
+	}
 
 	if (lport->rport_priv_size > 0)
 		rport_priv_size = lport->rport_priv_size;
Signature · 1 line
2.25.1
author maintainer
#201 lore raw

PATCH 199/206 scsi: libfc: Skip additional kref updating work event

In reply to Sasha Levin

From: Javed Hasan <[email protected]>

[ Upstream commit 823a65409c8990f64c5693af98ce0e7819975cba ]

When an rport event (RPORT_EV_READY) is updated without work being queued, avoid taking an additional reference.

This issue was leading to memory leak. Trace from KMEMLEAK tool:

unreferenced object 0xffff8888259e8780 (size 512):
comm "kworker/2:1", jiffies 4433237386 (age 113021.971s)

    hex dump (first 32 bytes):
	58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
	01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
  backtrace:
  [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
  [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
  [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
  [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
  [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
  [<00000000e0eb6893>] process_one_work+0x382/0x6c0
  [<000000002dfd9e21>] worker_thread+0x57/0x5c0
  [<00000000b648204f>] kthread+0x1a0/0x1c0
  [<0000000072f5ab20>] ret_from_fork+0x35/0x40
  [<000000001d5c05d8>] 0xffffffffffffffff

Below is the log sequence which leads to memory leak. Here we get the RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the event RPORT_EV_READY by event RPORT_EV_STOP. Because of this, kref_count gets incremented by 1.

kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in INIT state
kernel: host0: rport fffce5: Port is Ready
kernel: host0: rport fffce5: Received PRLI request while in state Ready
kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host0: rport fffce5: Received LOGO request while in state Ready
kernel: host0: rport fffce5: Delete port
kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy
kernel: host0: rport fffce5: work event 3
kernel: host0: rport fffce5: lld callback ev 3
kernel: host0: rport fffce5: work delete

---
 drivers/scsi/libfc/fc_rport.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/scsi/libfc/fc_rport.c +5 -4
index f39d2d62b002f..2b3239765c249 100644
@@ -495,10 +495,11 @@ static void fc_rport_enter_delete(struct fc_rport_priv *rdata,
 
 	fc_rport_state_enter(rdata, RPORT_ST_DELETE);
 
-	kref_get(&rdata->kref);
-	if (rdata->event == RPORT_EV_NONE &&
-	    !queue_work(rport_event_queue, &rdata->event_work))
-		kref_put(&rdata->kref, fc_rport_destroy);
+	if (rdata->event == RPORT_EV_NONE) {
+		kref_get(&rdata->kref);
+		if (!queue_work(rport_event_queue, &rdata->event_work))
+			kref_put(&rdata->kref, fc_rport_destroy);
+	}
 
 	rdata->event = event;
 }
Signature · 1 line
2.25.1
author maintainer
#202 lore raw

PATCH 200/206 selftests/x86/syscall_nt: Clear weird flags after each test

In reply to Sasha Levin

From: Andy Lutomirski <[email protected]>

[ Upstream commit a61fa2799ef9bf6c4f54cf7295036577cececc72 ]

Clear the weird flags before logging to improve strace output -- logging results while, say, TF is set does no one any favors.

---
 tools/testing/selftests/x86/syscall_nt.c | 1 +
 1 file changed, 1 insertion(+)
tools/testing/selftests/x86/syscall_nt.c +1 -0
index 43fcab367fb0a..74e6b3fc2d09e 100644
@@ -67,6 +67,7 @@ static void do_it(unsigned long extraflags)
 	set_eflags(get_eflags() | extraflags);
 	syscall(SYS_getpid);
 	flags = get_eflags();
+	set_eflags(X86_EFLAGS_IF | X86_EFLAGS_FIXED);
 	if ((flags & extraflags) == extraflags) {
 		printf("[OK]\tThe syscall worked and flags are still set\n");
 	} else {
Signature · 1 line
2.25.1
author maintainer
#203 lore raw

PATCH 201/206 vfio/pci: fix racy on error and request eventfd ctx

In reply to Sasha Levin

From: Zeng Tao <[email protected]>

[ Upstream commit b872d0640840018669032b20b6375a478ed1f923 ]

The vfio_pci_release call will free and clear the error and request eventfd ctx while these ctx could be in use at the same time in the function like vfio_pci_request, and it's expected to protect them under the vdev->igate mutex, which is missing in vfio_pci_release.

This issue is introduced since commit 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx"),and since commit 5c5866c593bb ("vfio/pci: Clear error and request eventfd ctx after releasing"), it's very easily to trigger the kernel panic like this:

[ 9513.904346] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 9513.913091] Mem abort info:
[ 9513.915871]   ESR = 0x96000006
[ 9513.918912]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 9513.924198]   SET = 0, FnV = 0
[ 9513.927238]   EA = 0, S1PTW = 0
[ 9513.930364] Data abort info:
[ 9513.933231]   ISV = 0, ISS = 0x00000006
[ 9513.937048]   CM = 0, WnR = 0
[ 9513.940003] user pgtable: 4k pages, 48-bit VAs, pgdp=0000007ec7d12000
[ 9513.946414] [0000000000000008] pgd=0000007ec7d13003, p4d=0000007ec7d13003, pud=0000007ec728c003, pmd=0000000000000000
[ 9513.956975] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 9513.962521] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio hclge hns3 hnae3 [last unloaded: vfio_pci]
[ 9513.972998] CPU: 4 PID: 1327 Comm: bash Tainted: G        W         5.8.0-rc4+ #3
[ 9513.980443] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B270.01 05/08/2020
[ 9513.989274] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[ 9513.994827] pc : _raw_spin_lock_irqsave+0x48/0x88
[ 9513.999515] lr : eventfd_signal+0x6c/0x1b0
[ 9514.003591] sp : ffff800038a0b960
[ 9514.006889] x29: ffff800038a0b960 x28: ffff007ef7f4da10
[ 9514.012175] x27: ffff207eefbbfc80 x26: ffffbb7903457000
[ 9514.017462] x25: ffffbb7912191000 x24: ffff007ef7f4d400
[ 9514.022747] x23: ffff20be6e0e4c00 x22: 0000000000000008
[ 9514.028033] x21: 0000000000000000 x20: 0000000000000000
[ 9514.033321] x19: 0000000000000008 x18: 0000000000000000
[ 9514.038606] x17: 0000000000000000 x16: ffffbb7910029328
[ 9514.043893] x15: 0000000000000000 x14: 0000000000000001
[ 9514.049179] x13: 0000000000000000 x12: 0000000000000002
[ 9514.054466] x11: 0000000000000000 x10: 0000000000000a00
[ 9514.059752] x9 : ffff800038a0b840 x8 : ffff007ef7f4de60
[ 9514.065038] x7 : ffff007fffc96690 x6 : fffffe01faffb748
[ 9514.070324] x5 : 0000000000000000 x4 : 0000000000000000
[ 9514.075609] x3 : 0000000000000000 x2 : 0000000000000001
[ 9514.080895] x1 : ffff007ef7f4d400 x0 : 0000000000000000
[ 9514.086181] Call trace:
[ 9514.088618]  _raw_spin_lock_irqsave+0x48/0x88
[ 9514.092954]  eventfd_signal+0x6c/0x1b0
[ 9514.096691]  vfio_pci_request+0x84/0xd0 [vfio_pci]
[ 9514.101464]  vfio_del_group_dev+0x150/0x290 [vfio]
[ 9514.106234]  vfio_pci_remove+0x30/0x128 [vfio_pci]
[ 9514.111007]  pci_device_remove+0x48/0x108
[ 9514.115001]  device_release_driver_internal+0x100/0x1b8
[ 9514.120200]  device_release_driver+0x28/0x38
[ 9514.124452]  pci_stop_bus_device+0x68/0xa8
[ 9514.128528]  pci_stop_and_remove_bus_device+0x20/0x38
[ 9514.133557]  pci_iov_remove_virtfn+0xb4/0x128
[ 9514.137893]  sriov_disable+0x3c/0x108
[ 9514.141538]  pci_disable_sriov+0x28/0x38
[ 9514.145445]  hns3_pci_sriov_configure+0x48/0xb8 [hns3]
[ 9514.150558]  sriov_numvfs_store+0x110/0x198
[ 9514.154724]  dev_attr_store+0x44/0x60
[ 9514.158373]  sysfs_kf_write+0x5c/0x78
[ 9514.162018]  kernfs_fop_write+0x104/0x210
[ 9514.166010]  __vfs_write+0x48/0x90
[ 9514.169395]  vfs_write+0xbc/0x1c0
[ 9514.172694]  ksys_write+0x74/0x100
[ 9514.176079]  __arm64_sys_write+0x24/0x30
[ 9514.179987]  el0_svc_common.constprop.4+0x110/0x200
[ 9514.184842]  do_el0_svc+0x34/0x98
[ 9514.188144]  el0_svc+0x14/0x40
[ 9514.191185]  el0_sync_handler+0xb0/0x2d0
[ 9514.195088]  el0_sync+0x140/0x180
[ 9514.198389] Code: b9001020 d2800000 52800022 f9800271 (885ffe61)
[ 9514.204455] ---[ end trace 648de00c8406465f ]---
[ 9514.212308] note: bash[1327] exited with preempt_count 1
Cc Qian Cai <[email protected]>
Cc Alex Williamson <[email protected]>
Fixes 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx")
---
 drivers/vfio/pci/vfio_pci.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/vfio/pci/vfio_pci.c +5 -0
index 94fad366312f1..58e7336b2748b 100644
@@ -409,14 +409,19 @@ static void vfio_pci_release(void *device_data)
 	if (!(--vdev->refcnt)) {
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
+		mutex_lock(&vdev->igate);
 		if (vdev->err_trigger) {
 			eventfd_ctx_put(vdev->err_trigger);
 			vdev->err_trigger = NULL;
 		}
+		mutex_unlock(&vdev->igate);
+
+		mutex_lock(&vdev->igate);
 		if (vdev->req_trigger) {
 			eventfd_ctx_put(vdev->req_trigger);
 			vdev->req_trigger = NULL;
 		}
+		mutex_unlock(&vdev->igate);
 	}
 
 	mutex_unlock(&driver_lock);
Signature · 1 line
2.25.1
author maintainer
#204 lore raw

PATCH 202/206 btrfs: qgroup: fix data leak caused by race between writeback and truncate

In reply to Sasha Levin

From: Qu Wenruo <[email protected]>

[ Upstream commit fa91e4aa1716004ea8096d5185ec0451e206aea0 ]

[BUG]
When running tests like generic/013 on test device with btrfs quota enabled, it can normally lead to data leak, detected at unmount time:

BTRFS warning (device dm-3): qgroup 0/5 has unreleased space, type 0 rsv 4096

  ------------[ cut here ]------------
  WARNING: CPU: 11 PID: 16386 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs]
  RIP: 0010:close_ctree+0x1dc/0x323 [btrfs]
  Call Trace:
   btrfs_put_super+0x15/0x17 [btrfs]
   generic_shutdown_super+0x72/0x110
   kill_anon_super+0x18/0x30
   btrfs_kill_super+0x17/0x30 [btrfs]
   deactivate_locked_super+0x3b/0xa0
   deactivate_super+0x40/0x50
   cleanup_mnt+0x135/0x190
   __cleanup_mnt+0x12/0x20
   task_work_run+0x64/0xb0
   __prepare_exit_to_usermode+0x1bc/0x1c0
   __syscall_return_slowpath+0x47/0x230
   do_syscall_64+0x64/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace caf08beafeca2392 ]---
  BTRFS error (device dm-3): qgroup reserved space leaked

[CAUSE]
In the offending case, the offending operations are:
2/6: writev f2X[269 1 0 0 0 0] [1006997,67,288] 0 2/7: truncate f2X[269 1 0 0 48 1026293] 18388 0

The following sequence of events could happen after the writev():

	CPU1 (writeback)		|		CPU2 (truncate)
-----------------------------------------------------------------
btrfs_writepages()			|
|- extent_write_cache_pages()		|
   |- Got page for 1003520		|
   |  1003520 is Dirty, no writeback	|
   |  So (!clear_page_dirty_for_io())   |
   |  gets called for it		|
   |- Now page 1003520 is Clean.	|
   |					| btrfs_setattr()
   |					| |- btrfs_setsize()
   |					|    |- truncate_setsize()
   |					|       New i_size is 18388
   |- __extent_writepage()		|
   |  |- page_offset() > i_size		|
      |- btrfs_invalidatepage()		|
	 |- Page is clean, so no qgroup |

callback executed

This means, the qgroup reserved data space is not properly released in btrfs_invalidatepage() as the page is Clean.

[FIX]
Instead of checking the dirty bit of a page, call btrfs_qgroup_free_data() unconditionally in btrfs_invalidatepage().

As qgroup rsv are completely bound to the QGROUP_RESERVED bit of io_tree, not bound to page status, thus we won't cause double freeing anyway.

Fixes 0b34c261e235 ("btrfs: qgroup: Prevent qgroup->reserved from going subzero")
---
 fs/btrfs/inode.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)
fs/btrfs/inode.c +10 -13
index bdfe159a60da6..64d459ca76d06 100644
@@ -8913,20 +8913,17 @@ again:
 	/*
 	 * Qgroup reserved space handler
 	 * Page here will be either
-	 * 1) Already written to disk
-	 *    In this case, its reserved space is released from data rsv map
-	 *    and will be freed by delayed_ref handler finally.
-	 *    So even we call qgroup_free_data(), it won't decrease reserved
-	 *    space.
-	 * 2) Not written to disk
-	 *    This means the reserved space should be freed here. However,
-	 *    if a truncate invalidates the page (by clearing PageDirty)
-	 *    and the page is accounted for while allocating extent
-	 *    in btrfs_check_data_free_space() we let delayed_ref to
-	 *    free the entire extent.
+	 * 1) Already written to disk or ordered extent already submitted
+	 *    Then its QGROUP_RESERVED bit in io_tree is already cleaned.
+	 *    Qgroup will be handled by its qgroup_record then.
+	 *    btrfs_qgroup_free_data() call will do nothing here.
+	 *
+	 * 2) Not written to disk yet
+	 *    Then btrfs_qgroup_free_data() call will clear the QGROUP_RESERVED
+	 *    bit of its io_tree, and free the qgroup reserved data space.
+	 *    Since the IO will never happen for this page.
 	 */
-	if (PageDirty(page))
-		btrfs_qgroup_free_data(inode, NULL, page_start, PAGE_SIZE);
+	btrfs_qgroup_free_data(inode, NULL, page_start, PAGE_SIZE);
 	if (!inode_evicting) {
 		clear_extent_bit(tree, page_start, page_end,
 				 EXTENT_LOCKED | EXTENT_DIRTY |
Signature · 1 line
2.25.1
author maintainer
#205 lore raw

PATCH 203/206 ubi: fastmap: Free unused fastmap anchor peb during detach

In reply to Sasha Levin

From: Hou Tao <[email protected]>

[ Upstream commit c16f39d14a7e0ec59881fbdb22ae494907534384 ]

When CONFIG_MTD_UBI_FASTMAP is enabled, fm_anchor will be assigned a free PEB during ubi_wl_init() or ubi_update_fastmap(). However if fastmap is not used or disabled on the MTD device, ubi_wl_entry related with the PEB will not be freed during detach.

So Fix it by freeing the unused fastmap anchor during detach.

Fixes f9c34bb52997 ("ubi: Fix producing anchor PEBs")
Reported-by [email protected]
---
 drivers/mtd/ubi/fastmap-wl.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/mtd/ubi/fastmap-wl.c +13 -2
index 13efebb400225..e08f6b4637dda 100644
@@ -48,6 +48,13 @@ static struct ubi_wl_entry *find_anchor_wl_entry(struct rb_root *root)
 	return victim;
 }
 
+static inline void return_unused_peb(struct ubi_device *ubi,
+				     struct ubi_wl_entry *e)
+{
+	wl_tree_add(e, &ubi->free);
+	ubi->free_count++;
+}
+
 /**
  * return_unused_pool_pebs - returns unused PEB to the free tree.
  * @ubi: UBI device description object
@@ -61,8 +68,7 @@ static void return_unused_pool_pebs(struct ubi_device *ubi,
 
 	for (i = pool->used; i < pool->size; i++) {
 		e = ubi->lookuptbl[pool->pebs[i]];
-		wl_tree_add(e, &ubi->free);
-		ubi->free_count++;
+		return_unused_peb(ubi, e);
 	}
 }
 
@@ -370,6 +376,11 @@ static void ubi_fastmap_close(struct ubi_device *ubi)
 	return_unused_pool_pebs(ubi, &ubi->fm_pool);
 	return_unused_pool_pebs(ubi, &ubi->fm_wl_pool);
 
+	if (ubi->fm_anchor) {
+		return_unused_peb(ubi, ubi->fm_anchor);
+		ubi->fm_anchor = NULL;
+	}
+
 	if (ubi->fm) {
 		for (i = 0; i < ubi->fm->used_blocks; i++)
 			kfree(ubi->fm->e[i]);
Signature · 6 lines
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
author maintainer
#206 lore raw

PATCH 204/206 perf parse-events: Use strcmp() to compare the PMU name

In reply to Sasha Levin

From: Jin Yao <[email protected]>

[ Upstream commit 8510895bafdbf7c4dd24c22946d925691135c2b2 ]

A big uncore event group is split into multiple small groups which only include the uncore events from the same PMU. This has been supported in the commit 3cdc5c2cb924a ("perf parse-events: Handle uncore event aliases in small groups properly").

If the event's PMU name starts to repeat, it must be a new event. That can be used to distinguish the leader from other members. But now it only compares the pointer of pmu_name (leader->pmu_name == evsel->pmu_name).

If we use "perf stat -M LLC_MISSES.PCIE_WRITE -a" on cascadelakex, the event list is:

evsel->name evsel->pmu_name
---------------------------------------------------------------
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_4 (as leader)
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_2
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_0
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_5
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_3
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_1
unc_iio_data_req_of_cpu.mem_write.part1 uncore_iio_4
......

For the event "unc_iio_data_req_of_cpu.mem_write.part1" with "uncore_iio_4", it should be the event from PMU "uncore_iio_4". It's not a new leader for this PMU.

But if we use "(leader->pmu_name == evsel->pmu_name)", the check would be failed and the event is stored to leaders[] as a new PMU leader.

So this patch uses strcmp to compare the PMU name between events.

Fixes d4953f7ef1a2 ("perf parse-events: Fix 3 use after frees found with clang ASAN")
Cc Alexander Shishkin <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Jin Yao <[email protected]>
Cc Kan Liang <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/util/parse-events.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
tools/perf/util/parse-events.c +2 -3
index 426f1984c143e..5ab5c69f50500 100644
@@ -1423,12 +1423,11 @@ parse_events__set_leader_for_uncore_aliase(char *name, struct list_head *list,
 		 * event. That can be used to distinguish the leader from
 		 * other members, even they have the same event name.
 		 */
-		if ((leader != evsel) && (leader->pmu_name == evsel->pmu_name)) {
+		if ((leader != evsel) &&
+		    !strcmp(leader->pmu_name, evsel->pmu_name)) {
 			is_leader = false;
 			continue;
 		}
-		/* The name is always alias name */
-		WARN_ON(strcmp(leader->name, evsel->name));
 
 		/* Store the leader event for each PMU */
 		leaders[nr_pmu++] = (uintptr_t) evsel;
Signature · 1 line
2.25.1
author maintainer
#207 lore raw

PATCH 205/206 net: openvswitch: use div_u64() for 64-by-32 divisions

In reply to Sasha Levin

From: Tonghao Zhang <[email protected]>

[ Upstream commit 659d4587fe7233bfdff303744b20d6f41ad04362 ]

Compile the kernel for arm 32 platform, the build warning found. To fix that, should use div_u64() for divisions.
| net/openvswitch/meter.c:396: undefined reference to `__udivdi3'

[add more commit msg, change reported tag, and use div_u64 instead of do_div by Tonghao]

Fixes e57358873bb5d6ca ("net: openvswitch: use u64 for meter bucket")
---
 net/openvswitch/meter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/openvswitch/meter.c +1 -1
index 6f5131d1074b0..5ea2471ffc03f 100644
@@ -256,7 +256,7 @@ static struct dp_meter *dp_meter_create(struct nlattr **a)
 		 * Start with a full bucket.
 		 */
 		band->bucket = (band->burst_size + band->rate) * 1000ULL;
-		band_max_delta_t = band->bucket / band->rate;
+		band_max_delta_t = div_u64(band->bucket, band->rate);
 		if (band_max_delta_t > meter->max_delta_t)
 			meter->max_delta_t = band_max_delta_t;
 		band++;
Signature · 1 line
2.25.1
author maintainer
#208 lore raw

PATCH 206/206 nvme: explicitly update mpath disk capacity on revalidation

In reply to Sasha Levin

From: Anthony Iliopoulos <[email protected]>

[ Upstream commit 05b29021fba5e725dd385151ef00b6340229b500 ]

Commit 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is blocked") reverted multipath head disk revalidation due to deadlocks caused by holding the bd_mutex during revalidate.

Updating the multipath disk blockdev size is still required though for userspace to be able to observe any resizing while the device is mounted. Directly update the bdev inode size to avoid unnecessarily holding the bdev->bd_mutex.

Fixes 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is

blocked")

---
 drivers/nvme/host/core.c |  1 +
 drivers/nvme/host/nvme.h | 13 +++++++++++++
 2 files changed, 14 insertions(+)
drivers/nvme/host/core.c +1 -0
index 84fcfcdb8ba5f..33dad9774da01 100644
@@ -1599,6 +1599,7 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
 	if (ns->head->disk) {
 		nvme_update_disk_info(ns->head->disk, ns, id);
 		blk_queue_stack_limits(ns->head->disk->queue, ns->queue);
+		nvme_mpath_update_disk_size(ns->head->disk);
 	}
 #endif
 }
drivers/nvme/host/nvme.h +13 -0
index a70b997060e68..9c2e7a151e400 100644
@@ -504,6 +504,16 @@ static inline void nvme_mpath_check_last_path(struct nvme_ns *ns)
 		kblockd_schedule_work(&head->requeue_work);
 }
 
+static inline void nvme_mpath_update_disk_size(struct gendisk *disk)
+{
+	struct block_device *bdev = bdget_disk(disk, 0);
+
+	if (bdev) {
+		bd_set_size(bdev, get_capacity(disk) << SECTOR_SHIFT);
+		bdput(bdev);
+	}
+}
+
 extern struct device_attribute dev_attr_ana_grpid;
 extern struct device_attribute dev_attr_ana_state;
 
@@ -570,6 +580,9 @@ static inline void nvme_mpath_wait_freeze(struct nvme_subsystem *subsys)
 static inline void nvme_mpath_start_freeze(struct nvme_subsystem *subsys)
 {
 }
+static inline void nvme_mpath_update_disk_size(struct gendisk *disk)
+{
+}
 #endif /* CONFIG_NVME_MULTIPATH */
 
 #ifdef CONFIG_NVM
Signature · 1 line
2.25.1