arm64: dts: imx8mq-librem5: correct GPIO hog property
Subsystems (2)
PATCH v3 1/3 arm64: dts: imx8mq-librem5: correct GPIO hog property
Correct the name of property for GPIO specifier in GPIO hog.
---
Changes since v2:
1. None, split from previous patchset using common GPIO schema
--- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +1 -1
@@ -251,7 +251,7 @@ pmic-5v { gpio-hog; - gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; input; }; };
Signature · 1 line
2.17.1
PATCH v3 2/3 arm64: dts: imx8mq-librem5: align GPIO hog names with dtschema
dtschema expects GPIO hogs to end with 'hog' suffix.
---
Changes since v2:
1. None, split from previous patchset using common GPIO schema
--- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +1 -1
@@ -249,7 +249,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic_5v>; - pmic-5v { + pmic-5v-hog { gpio-hog; gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; input;
Signature · 1 line
2.17.1
Re: [PATCH v3 2/3] arm64: dts: imx8mq-librem5: align GPIO hog names with dtschema
Quoted 3 lines · Krzysztof Kozlowski
dtschema expects GPIO hogs to end with 'hog' suffix.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Ping me after dtschema gets accepted.
Shawn
Quoted 25 lines
---
Changes since v2:
1. None, split from previous patchset using common GPIO schema--- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +1
-1@@ -249,7 +249,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic_5v>; - pmic-5v { + pmic-5v-hog { gpio-hog; gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; input;Signature · 1 line
2.17.1
Re: [PATCH v3 2/3] arm64: dts: imx8mq-librem5: align GPIO hog names with dtschema
Quoted 7 lines · Shawn Guo
Quoted 3 lines · Krzysztof Kozlowski
dtschema expects GPIO hogs to end with 'hog' suffix.
Signed-off-by Krzysztof Kozlowski <[email protected]>Ping me after dtschema gets accepted.
Hi Shawn,
Happened just now, in dt-schema repo:
https://github.com/devicetree-org/dt-schema/pull/47
Best regards,
Krzysztof
Re: [PATCH v3 2/3] arm64: dts: imx8mq-librem5: align GPIO hog names with dtschema
Quoted 6 lines · Krzysztof Kozlowski
Quoted 4 lines · Shawn Guo
Quoted 2 lines · Krzysztof Kozlowski
dtschema expects GPIO hogs to end with 'hog' suffix.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Krzysztof Kozlowski <[email protected]>Ping me after dtschema gets accepted.
Hi Shawn,
Happened just now, in dt-schema repo:
https://github.com/devicetree-org/dt-schema/pull/47
The dtschema was accepted in September. Can you pick up this patch?
Best regards,
Krzysztof
Shawn Guo
AppliedRe: [PATCH v3 2/3] arm64: dts: imx8mq-librem5: align GPIO hog names with dtschema
In reply to Krzysztof KozlowskiQuoted 3 lines · Krzysztof Kozlowski
dtschema expects GPIO hogs to end with 'hog' suffix.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Applied, thanks.
PATCH v3 3/3 ARM: dts: imx: align GPIO hog names with dtschema
In reply to Krzysztof Kozlowskidtschema for GPIO controllers expects GPIO hogs to end with 'hog' suffix.
---
Changes since v2:
1. None, split from previous patchset using common GPIO schema
--- arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 8 ++++---- arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/imx51-zii-rdu1.dts +1 -1
@@ -451,7 +451,7 @@ "", "", "", "", "", "", "", ""; - unused-sd3-wp-gpio { + unused-sd3-wp-hog { /* * See pinctrl_esdhc1 below for more details on this */
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +4 -4
@@ -330,28 +330,28 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio3_hog>; - usb-emulation { + usb-emulation-hog { gpio-hog; gpios = <19 GPIO_ACTIVE_HIGH>; output-low; line-name = "usb-emulation"; }; - usb-mode1 { + usb-mode1-hog { gpio-hog; gpios = <20 GPIO_ACTIVE_HIGH>; output-high; line-name = "usb-mode1"; }; - usb-pwr { + usb-pwr-hog { gpio-hog; gpios = <22 GPIO_ACTIVE_LOW>; output-high; line-name = "usb-pwr-ctrl-en-n"; }; - usb-mode2 { + usb-mode2-hog { gpio-hog; gpios = <23 GPIO_ACTIVE_HIGH>; output-high;
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +1 -1
@@ -110,7 +110,7 @@ }; &gpio5 { - emmc-usd-mux { + emmc-usd-mux-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_LOW>; output-high;
Signature · 1 line
2.17.1
Shawn Guo
AppliedRe: [PATCH v3 3/3] ARM: dts: imx: align GPIO hog names with dtschema
Quoted 4 lines · Krzysztof Kozlowski
dtschema for GPIO controllers expects GPIO hogs to end with 'hog' suffix.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Applied, thanks.
Shawn Guo
AppliedQuoted 3 lines · Krzysztof Kozlowski
Correct the name of property for GPIO specifier in GPIO hog.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Applied, thanks.