Skip to contentSkip to conversation

Documentation: dt: binding: fsl: Add 'fsl,ippdexpcr1-alt-addr' property

PATCH Superseded Ran Wang 1 participant 5 messages Sep 23, 2020

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Ran Wang

author
#0 lore raw

PATCH v2 1/5 Documentation: dt: binding: fsl: Add 'fsl,ippdexpcr1-alt-addr' property

From: Biwen Li <[email protected]>

The 'fsl,ippdexpcr1-alt-addr' property is used to handle an errata A-008646 on LS1021A

---
Change in v2:
- None

 Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
Documentation/devicetree/bindings/soc/fsl/rcpm.txt +19 -0
index 5a33619..1be58a3 100644
@@ -34,6 +34,11 @@ Chassis Version		Example Chips
 Optional properties:
  - little-endian : RCPM register block is Little Endian. Without it RCPM
    will be Big Endian (default case).
+ - fsl,ippdexpcr1-alt-addr : The property is related to a hardware issue
+   on SoC LS1021A and only needed on SoC LS1021A.
+   Must include 2 entries:
+   The first entry must be a link to the SCFG device node.
+   The 2nd entry must be offset of register IPPDEXPCR1 in SCFG.
 
 Example:
 The RCPM node for T4240:
@@ -43,6 +48,20 @@ The RCPM node for T4240:
 		#fsl,rcpm-wakeup-cells = <2>;
 	};
 
+The RCPM node for LS1021A:
+	rcpm: rcpm@1ee2140 {
+		compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
+		reg = <0x0 0x1ee2140 0x0 0x8>;
+		#fsl,rcpm-wakeup-cells = <2>;
+
+		/*
+		 * The second and third entry compose an alt offset
+		 * address for IPPDEXPCR1(SCFG_SPARECR8)
+		 */
+		fsl,ippdexpcr1-alt-addr = <&scfg 0x51c>;
+	};
+
+
 * Freescale RCPM Wakeup Source Device Tree Bindings
 -------------------------------------------
 Required fsl,rcpm-wakeup property should be added to a device node if the device
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#1 lore raw

PATCH v2 2/5 soc: fsl: handle RCPM errata A-008646 on SoC LS1021A

From: Biwen Li <[email protected]>

Hardware issue:
- Reading register RCPM_IPPDEXPCR1 always return zero, this causes system firmware could not get correct information and wrongly do clock gating for all wakeup source IP during system suspend. Then those IPs will never get chance to wake system.

Workaround:
- Duplicate register RCPM_IPPDEXPCR1's setting to register SCFG_SPARECR8 to allow system firmware's psci method read it and do things accordingly.

---
Change in v2:
- Update commit message to be more clear.
- Replace device_property_read_u32_array() with syscon_regmap_lookup_by_phandle_args() to make code simpler.

 drivers/soc/fsl/rcpm.c | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)
drivers/soc/fsl/rcpm.c +30 -1
index a093dbe..6e37777 100644
@@ -2,7 +2,7 @@
 //
 // rcpm.c - Freescale QorIQ RCPM driver
 //
-// Copyright 2019 NXP
+// Copyright 2019-2020 NXP
 //
 // Author: Ran Wang <[email protected]>
 
@@ -13,6 +13,9 @@
 #include <linux/slab.h>
 #include <linux/suspend.h>
 #include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define RCPM_WAKEUP_CELL_MAX_SIZE	7
 
@@ -37,6 +40,9 @@ static int rcpm_pm_prepare(struct device *dev)
 	struct device_node	*np = dev->of_node;
 	u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1];
 	u32 setting[RCPM_WAKEUP_CELL_MAX_SIZE] = {0};
+	struct regmap *scfg_addr_regmap = NULL;
+	u32 reg_offset = 0;
+	u32 reg_value = 0;
 
 	rcpm = dev_get_drvdata(dev);
 	if (!rcpm)
@@ -90,6 +96,29 @@ static int rcpm_pm_prepare(struct device *dev)
 			tmp |= ioread32be(address);
 			iowrite32be(tmp, address);
 		}
+		/*
+		 * Workaround of errata A-008646 on SoC LS1021A:
+		 * There is a bug of register ippdexpcr1.
+		 * Reading configuration register RCPM_IPPDEXPCR1
+		 * always return zero. So save ippdexpcr1's value
+		 * to register SCFG_SPARECR8.And the value of
+		 * ippdexpcr1 will be read from SCFG_SPARECR8.
+		 */
+		if (dev_of_node(dev) && (i == 1)) {
+			scfg_addr_regmap = syscon_regmap_lookup_by_phandle_args(np,
+					"fsl,ippdexpcr1-alt-addr",
+					1,
+					&reg_offset);
+			if (!IS_ERR_OR_NULL(scfg_addr_regmap)) {
+				/* Update value on register SCFG_SPARECR8 */
+				regmap_read(scfg_addr_regmap,
+						reg_offset,
+						&reg_value);
+				regmap_write(scfg_addr_regmap,
+						reg_offset,
+						tmp | reg_value);
+			}
+		}
 	}
 
 	return 0;
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH v2 3/5 arm: dts: ls1021a: enable RCPM workaround for erratum A-008646

In reply to Ran Wang

From: Biwen Li <[email protected]>

The patch fixes a bug that FlexTimer cannot
wakeup system in deep sleep.

---
Change in v2:
- Change subject of commit message to be consistent with other related patches.

 arch/arm/boot/dts/ls1021a.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/ls1021a.dtsi +1 -0
index 827373e..089fe86 100644
@@ -1007,6 +1007,7 @@
 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x8>;
 			#fsl,rcpm-wakeup-cells = <2>;
+			fsl,ippdexpcr1-alt-addr = <&scfg 0x51c>;
 		};
 
 		ftm_alarm0: timer0@29d0000 {
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#3 lore raw

PATCH v2 4/5 arm: dts: ls1021a: fix flextimer failed to wake system

In reply to Ran Wang

The data of property 'fsl,rcpm-wakeup' is not corrcet, which causing RCPM driver incorrectly program register IPPDEXPCR1, then flextimer is wrongly clock gated during system suspend, can't send interrupt to wake.

---
Change in v2:
- None

 arch/arm/boot/dts/ls1021a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/ls1021a.dtsi +1 -1
index 089fe86..e372630f 100644
@@ -1014,7 +1014,7 @@
 			compatible = "fsl,ls1021a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			reg-names = "ftm";
-			fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			big-endian;
 		};
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#4 lore raw

PATCH v2 5/5 arm: dts: ls1021a: fix rcpm failed to claim resource

In reply to Ran Wang

The range of dcfg reg is wrong, which overlap with other device, such as rcpm. This issue causing rcpm driver failed to claim reg resource when calling devm_ioremap_resource().

---
Change in v2:
- None

 arch/arm/boot/dts/ls1021a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/ls1021a.dtsi +1 -1
index e372630f..286c547 100644
@@ -173,7 +173,7 @@
 
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1021a-dcfg", "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
Signature · 1 line
2.7.4