net: wireless: rtw88: Fix oops on probe errors
Subsystems (3)
cover net: wireless: rtw88: Fix oops on probe errors
Hello,
This mini-series fixes oopses in rtw88 device probe error handling, resulting from asynchronous firmware loading.
Since there does not appear to be a public kernel API for canceling scheduled or ongoing firmware loads, it seems we need to wait with teardown until rtw88's callback was invoked and signals completion.
Found on RTD1296 arm64 SoC with experimental PCI host bridge driver
(https://github.com/afaerber/linux/commits/rtd1295-next) with a 4K physical bar window, resulting in rtw_pci_setup_resource() failing, or with non-implemented 4K remapping resulting in rtw_pci_read32() returning 0xffffffff values and causing rtw_mac_power_on() to fail.
Cheers,
Andreas
Andreas Färber (2):
rtw88: Fix probe error handling race with firmware loading
rtw88: Fix potential probe error handling race with wow firmware
loading
drivers/net/wireless/realtek/rtw88/main.c | 5 +++++ 1 file changed, 5 insertions(+)
Signature · 1 line
2.28.0
PATCH 1/2 rtw88: Fix probe error handling race with firmware loading
In case of rtw8822be, a probe failure after successful rtw_core_init() has been observed to occasionally lead to an oops from rtw_load_firmware_cb():
[ 3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000 [ 3.930531] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 3.944042] pci 0001:01:00.0: supports D1 D2 [ 3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit] [ 3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit] [ 3.972332] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] [ 3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001) [ 3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory [ 3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region [ 4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources [ 4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12 [ 4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c [ 4.058975] Mem abort info: [ 4.058980] ESR = 0x96000004 [ 4.058990] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.070353] SET = 0, FnV = 0 [ 4.073487] EA = 0, S1PTW = 0 [ 4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console [ 4.076723] Data abort info: [ 4.086415] ISV = 0, ISS = 0x00000004 [ 4.087731] Freeing unused kernel memory: 1792K [ 4.090391] CM = 0, WnR = 0 [ 4.098091] [edafeaac9607952c] address between user and kernel address ranges [ 4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4.111129] Modules linked in: [ 4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700 [ 4.122386] Hardware name: Realtek Saola EVB (DT) [ 4.127223] Workqueue: events request_firmware_work_func [ 4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 4.138393] pc : rtw_load_firmware_cb+0x54/0xbc [ 4.143040] lr : request_firmware_work_func+0x44/0xb4 [ 4.148217] sp : ffff800010133d70 [ 4.151616] x29: ffff800010133d70 x28: 0000000000000000 [ 4.157069] x27: 0000000000000000 x26: 0000000000000000 [ 4.162520] x25: 0000000000000000 x24: 0000000000000000 [ 4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100 [ 4.173424] x21: ffff00007ad35880 x20: edafeaac96079504 [ 4.178877] x19: ffff00007ad35870 x18: 0000000000000000 [ 4.184328] x17: 00000000000044d8 x16: 0000000000004310 [ 4.189780] x15: 0000000000000800 x14: 00000000ef006305 [ 4.195231] x13: ffffffff00000000 x12: ffffffffffffffff [ 4.200682] x11: 0000000000000020 x10: 0000000000000003 [ 4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680 [ 4.211585] x7 : 0000000000000000 x6 : ffff80001119b588 [ 4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80 [ 4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718 [ 4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600 [ 4.233391] Call trace: [ 4.235906] rtw_load_firmware_cb+0x54/0xbc [ 4.240198] request_firmware_work_func+0x44/0xb4 [ 4.245027] process_one_work+0x178/0x1e4 [ 4.249142] worker_thread+0x1d0/0x268 [ 4.252989] kthread+0xe8/0xf8 [ 4.256127] ret_from_fork+0x10/0x18 [ 4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681) [ 4.266049] ---[ end trace f822ebae1a8545c2 ]---
To avoid this, wait on the completion callbacks in rtw_core_deinit() before releasing firmware and continuing teardown.
Note that rtw_wait_firmware_completion() was introduced with c8e5695eae9959fc5774c0f490f2450be8bad3de ("rtw88: load wowlan firmware if wowlan is supported"), so backports to earlier branches may need to inline wait_for_completion(&rtwdev->fw.completion) instead.
--- drivers/net/wireless/realtek/rtw88/main.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/wireless/realtek/rtw88/main.c +2 -0
@@ -1486,6 +1486,8 @@ void rtw_core_deinit(struct rtw_dev *rtwdev)struct rtw_rsvd_page *rsvd_pkt, *tmp;unsigned long flags; +rtw_wait_firmware_completion (rtwdev); +if (fw->firmware)release_firmware (fw->firmware);
Signature · 1 line
2.28.0
Re: [PATCH 1/2] rtw88: Fix probe error handling race with firmware loading
Quoted 72 lines · Andreas Färber
In case of rtw8822be, a probe failure after successful
rtw_core_init()has been observed to occasionally lead to an oops fromrtw_load_firmware_cb():[ 3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000 [ 3.930531] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 3.944042] pci 0001:01:00.0: supports D1 D2 [ 3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit] [ 3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit] [ 3.972332] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] [ 3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001) [ 3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory [ 3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region [ 4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources [ 4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12 [ 4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c [ 4.058975] Mem abort info: [ 4.058980] ESR = 0x96000004 [ 4.058990] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.070353] SET = 0, FnV = 0 [ 4.073487] EA = 0, S1PTW = 0 [ 4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console [ 4.076723] Data abort info: [ 4.086415] ISV = 0, ISS = 0x00000004 [ 4.087731] Freeing unused kernel memory: 1792K [ 4.090391] CM = 0, WnR = 0 [ 4.098091] [edafeaac9607952c] address between user and kernel address ranges [ 4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4.111129] Modules linked in: [ 4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700 [ 4.122386] Hardware name: Realtek Saola EVB (DT) [ 4.127223] Workqueue: events request_firmware_work_func [ 4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 4.138393] pc : rtw_load_firmware_cb+0x54/0xbc [ 4.143040] lr : request_firmware_work_func+0x44/0xb4 [ 4.148217] sp : ffff800010133d70 [ 4.151616] x29: ffff800010133d70 x28: 0000000000000000 [ 4.157069] x27: 0000000000000000 x26: 0000000000000000 [ 4.162520] x25: 0000000000000000 x24: 0000000000000000 [ 4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100 [ 4.173424] x21: ffff00007ad35880 x20: edafeaac96079504 [ 4.178877] x19: ffff00007ad35870 x18: 0000000000000000 [ 4.184328] x17: 00000000000044d8 x16: 0000000000004310 [ 4.189780] x15: 0000000000000800 x14: 00000000ef006305 [ 4.195231] x13: ffffffff00000000 x12: ffffffffffffffff [ 4.200682] x11: 0000000000000020 x10: 0000000000000003 [ 4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680 [ 4.211585] x7 : 0000000000000000 x6 : ffff80001119b588 [ 4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80 [ 4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718 [ 4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600 [ 4.233391] Call trace: [ 4.235906] rtw_load_firmware_cb+0x54/0xbc [ 4.240198] request_firmware_work_func+0x44/0xb4 [ 4.245027] process_one_work+0x178/0x1e4 [ 4.249142] worker_thread+0x1d0/0x268 [ 4.252989] kthread+0xe8/0xf8 [ 4.256127] ret_from_fork+0x10/0x18 [ 4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681) [ 4.266049] ---[ end trace f822ebae1a8545c2 ]---To avoid this, wait on the completion callbacks in
rtw_core_deinit()before releasing firmware and continuing teardown.Note that
rtw_wait_firmware_completion()was introduced withc8e5695eae9959fc5774c0f490f2450be8bad3de("rtw88: load wowlan firmware if wowlan is supported"), so backports to earlier branches may need to inlinewait_for_completion(&rtwdev->fw.completion)instead.
Quoted 4 lines
Fixes e3037485c68e ("rtw88: new Realtek 802.11ac driver")Fixes c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")Cc Yan-Hsuan Chuang <[email protected]>Signed-off-by Andreas Färber <[email protected]>
2 patches applied to wireless-drivers-next.git, thanks.
ecda9cda3338 rtw88: Fix probe error handling race with firmware loading ac4bac99161e rtw88: Fix potential probe error handling race with wow firmware loading
Signature · 3 lines
https://patchwork.kernel.org/patch/11787655/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Re: [PATCH 1/2] rtw88: Fix probe error handling race with firmware loading
In reply to Andreas FärberQuoted 72 lines · Andreas Färber
In case of rtw8822be, a probe failure after successful
rtw_core_init()has been observed to occasionally lead to an oops fromrtw_load_firmware_cb():[ 3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000 [ 3.930531] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 3.944042] pci 0001:01:00.0: supports D1 D2 [ 3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit] [ 3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit] [ 3.972332] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] [ 3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001) [ 3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory [ 3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region [ 4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources [ 4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12 [ 4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c [ 4.058975] Mem abort info: [ 4.058980] ESR = 0x96000004 [ 4.058990] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.070353] SET = 0, FnV = 0 [ 4.073487] EA = 0, S1PTW = 0 [ 4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console [ 4.076723] Data abort info: [ 4.086415] ISV = 0, ISS = 0x00000004 [ 4.087731] Freeing unused kernel memory: 1792K [ 4.090391] CM = 0, WnR = 0 [ 4.098091] [edafeaac9607952c] address between user and kernel address ranges [ 4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4.111129] Modules linked in: [ 4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700 [ 4.122386] Hardware name: Realtek Saola EVB (DT) [ 4.127223] Workqueue: events request_firmware_work_func [ 4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 4.138393] pc : rtw_load_firmware_cb+0x54/0xbc [ 4.143040] lr : request_firmware_work_func+0x44/0xb4 [ 4.148217] sp : ffff800010133d70 [ 4.151616] x29: ffff800010133d70 x28: 0000000000000000 [ 4.157069] x27: 0000000000000000 x26: 0000000000000000 [ 4.162520] x25: 0000000000000000 x24: 0000000000000000 [ 4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100 [ 4.173424] x21: ffff00007ad35880 x20: edafeaac96079504 [ 4.178877] x19: ffff00007ad35870 x18: 0000000000000000 [ 4.184328] x17: 00000000000044d8 x16: 0000000000004310 [ 4.189780] x15: 0000000000000800 x14: 00000000ef006305 [ 4.195231] x13: ffffffff00000000 x12: ffffffffffffffff [ 4.200682] x11: 0000000000000020 x10: 0000000000000003 [ 4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680 [ 4.211585] x7 : 0000000000000000 x6 : ffff80001119b588 [ 4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80 [ 4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718 [ 4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600 [ 4.233391] Call trace: [ 4.235906] rtw_load_firmware_cb+0x54/0xbc [ 4.240198] request_firmware_work_func+0x44/0xb4 [ 4.245027] process_one_work+0x178/0x1e4 [ 4.249142] worker_thread+0x1d0/0x268 [ 4.252989] kthread+0xe8/0xf8 [ 4.256127] ret_from_fork+0x10/0x18 [ 4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681) [ 4.266049] ---[ end trace f822ebae1a8545c2 ]---To avoid this, wait on the completion callbacks in
rtw_core_deinit()before releasing firmware and continuing teardown.Note that
rtw_wait_firmware_completion()was introduced withc8e5695eae9959fc5774c0f490f2450be8bad3de("rtw88: load wowlan firmware if wowlan is supported"), so backports to earlier branches may need to inlinewait_for_completion(&rtwdev->fw.completion)instead.
Quoted 4 lines
Fixes e3037485c68e ("rtw88: new Realtek 802.11ac driver")Fixes c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")Cc Yan-Hsuan Chuang <[email protected]>Signed-off-by Andreas Färber <[email protected]>
2 patches applied to wireless-drivers-next.git, thanks.
ecda9cda3338 rtw88: Fix probe error handling race with firmware loading ac4bac99161e rtw88: Fix potential probe error handling race with wow firmware loading
Signature · 9 lines
https://patchwork.kernel.org/patch/11787655/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 2/2 rtw88: Fix potential probe error handling race with wow firmware loading
In reply to Andreas FärberIf rtw_core_init() fails to load the wow firmware, rtw_core_deinit() will not get called to clean up the regular firmware.
Ensure that an error loading the wow firmware does not produce an oops for the regular firmware by waiting on its completion to be signalled before returning. Also release the loaded firmware.
--- drivers/net/wireless/realtek/rtw88/main.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/net/wireless/realtek/rtw88/main.c +3 -0
@@ -1472,6 +1472,9 @@ int rtw_core_init(struct rtw_dev *rtwdev) ret =rtw_load_firmware (rtwdev,RTW_WOWLAN_FW );if (ret) {rtw_warn (rtwdev,"no wow firmware loaded\n" ); +wait_for_completion (&rtwdev->fw.completion); +if (rtwdev->fw.firmware) +release_firmware (rtwdev->fw.firmware);return ret; } }
Signature · 1 line
2.28.0