Skip to contentSkip to conversation

arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

PATCH New Pali Rohár 3 participants 7 messages Sep 25, 2020 – Oct 1, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

Some Espressobin boards got assigned more than one MAC address. Update instructions how to correctly store and preserve all MAC addresses.

---
 doc/README.marvell | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)
doc/README.marvell +17 -6
index 5416bc3035..6fc5ac8a40 100644
@@ -27,7 +27,7 @@ Build Procedure
 	- For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
 	- For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
 	- For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
-	- For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
+	- For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig"
 
 5. Configure the device-tree and build the U-Boot image:
 
@@ -62,11 +62,15 @@ Configuration update
 Permanent ethernet MAC address
 -------------------------------
 	Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup
-	permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC).
-	Some boards like EspressoBin have MAC address printed on sticker. To print current MAC
-	address run:
+	permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC).
+	Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned
+	only one address other may also more than one. To print current MAC addresses run:
 
 		# echo $ethaddr
+		# echo $eth1addr
+		# echo $eth2addr
+		# echo $eth3addr
+		# ...
 
 	MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03
 	and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot
@@ -75,13 +79,20 @@ Permanent ethernet MAC address
 	suggested to generate new random one.
 
 	After flashing new U-Boot version it is suggested to reset U-Boot env variables to default
-	and then set correct permanent ethernet MAC address.
+	and then set correct permanent ethernet MAC addresses.
 
 		# env default -a
 		# setenv ethaddr XX:XX:XX:XX:XX:XX
+		# setenv eth1addr XX:XX:XX:XX:XX:XX
+		# setenv eth2addr YY:YY:YY:YY:YY:YY
+		# setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
+		# ...
 		# saveenv
 
-	Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address.
+	Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr
+	are optional per-port MAC addresses. When optional ethNaddr variables are not defined then
+	they are inherited from required ethaddr variable. eth1addr contains MAC address for the
+	wan port, other for particular lan ports.
 
 	Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as
 	U-Boot will inject it into kernel's device-tree.
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/1 arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

Quoted 50 lines · Pali Roh?r

Some Espressobin boards got assigned more than one MAC address. Update instructions how to correctly store and preserve all MAC addresses.

---
  doc/README.marvell | 23 +++++++++++++++++------
  1 file changed, 17 insertions(+), 6 deletions(-)
doc/README.marvell +10 -5
index 5416bc3035..6fc5ac8a40 100644
@@ -27,7 +27,7 @@ Build Procedure
  	- For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
  	- For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
  	- For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
-	- For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
+	- For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig"
 
  5. Configure the device-tree and build the U-Boot image:
 
@@ -62,11 +62,15 @@ Configuration update
  Permanent ethernet MAC address
  -------------------------------
  	Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup
-	permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC).
-	Some boards like EspressoBin have MAC address printed on sticker. To print current MAC
-	address run:
+	permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC).
+	Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned
+	only one address other may also more than one. To print current MAC addresses run:
 
  		# echo $ethaddr
+		# echo $eth1addr
+		# echo $eth2addr
+		# echo $eth3addr
+		# ...
 
  	MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03
  	and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot
@@ -75,13 +79,20 @@ Permanent ethernet MAC address
  	suggested to generate new random one.
 
  	After flashing new U-Boot version it is suggested to reset U-Boot env variables to default
-	and then set correct permanent ethernet MAC address.
+	and then set correct permanent ethernet MAC addresses.
 
  		# env default -a
  		# setenv ethaddr XX:XX:XX:XX:XX:XX
+		# setenv eth1addr XX:XX:XX:XX:XX:XX

doc/README.marvell Permanent ethernet MAC address · line 95

Quoted 10 lines
doc/README.marvell +7 -1
+		# setenv eth2addr YY:YY:YY:YY:YY:YY
+		# setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
+		# ...
  		# saveenv
 
-	Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address.
+	Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr
+	are optional per-port MAC addresses. When optional ethNaddr variables are not defined then
+	they are inherited from required ethaddr variable. eth1addr contains MAC address for the
+	wan port, other for particular lan ports.

I never tried, what does "inherit" mean? eth1addr=$ethaddr+1 and so on?

And would port1=wan be correct for v7?

Quoted 4 lines
doc/README.marvell +0 -0
  	Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as
  	U-Boot will inject it into kernel's device-tree.
 
#2 lore raw

PATCH 1/1 arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

Quoted 48 lines · On Saturday 26 September 2020 11:16:12 Andre Heider wrote:
Quoted 47 lines · Pali Roh?r

Some Espressobin boards got assigned more than one MAC address. Update instructions how to correctly store and preserve all MAC addresses.

---
  doc/README.marvell | 23 +++++++++++++++++------
  1 file changed, 17 insertions(+), 6 deletions(-)
doc/README.marvell +13 -5
index 5416bc3035..6fc5ac8a40 100644
@@ -27,7 +27,7 @@ Build Procedure
  	- For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
  	- For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
  	- For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
-	- For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
+	- For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig"
  5. Configure the device-tree and build the U-Boot image:
@@ -62,11 +62,15 @@ Configuration update
  Permanent ethernet MAC address
  -------------------------------
  	Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup
-	permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC).
-	Some boards like EspressoBin have MAC address printed on sticker. To print current MAC
-	address run:
+	permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC).
+	Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned
+	only one address other may also more than one. To print current MAC addresses run:
  		# echo $ethaddr
+		# echo $eth1addr
+		# echo $eth2addr
+		# echo $eth3addr
+		# ...
  	MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03
  	and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot
@@ -75,13 +79,20 @@ Permanent ethernet MAC address
  	suggested to generate new random one.
  	After flashing new U-Boot version it is suggested to reset U-Boot env variables to default
-	and then set correct permanent ethernet MAC address.
+	and then set correct permanent ethernet MAC addresses.
  		# env default -a
  		# setenv ethaddr XX:XX:XX:XX:XX:XX
+		# setenv eth1addr XX:XX:XX:XX:XX:XX
+		# setenv eth2addr YY:YY:YY:YY:YY:YY
+		# setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
+		# ...
Quoted 8 lines

doc/README.marvell Permanent ethernet MAC address · line 95

Quoted 6 lines
doc/README.marvell +4 -1
  		# saveenv
-	Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address.
+	Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr
+	are optional per-port MAC addresses. When optional ethNaddr variables are not defined then
+	they are inherited from required ethaddr variable. eth1addr contains MAC address for the
+	wan port, other for particular lan ports.

I never tried, what does "inherit" mean? eth1addr=$ethaddr+1 and so on?

It means that address for DSA port is same as address for main ethernet adapter (ethaddr). So ethNaddr = $ethaddr

Quoted 1 line

And would port1=wan be correct for v7?

Yes.

https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git/diff/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts?h=for-next&id=b64d814257b027e29a474bcd660f6372490138c7

eth1addr is set to ethernet1 and ethernet1 is alias for &switch0port3 for V7. And switch0port3 is wan on V7.

Quoted 4 lines
Quoted 3 lines
doc/README.marvell +0 -0
  	Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as
  	U-Boot will inject it into kernel's device-tree.
 
#3 lore raw

PATCH 1/1 arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

Quoted 58 lines · Pali Roh?r
Quoted 48 lines · On Saturday 26 September 2020 11:16:12 Andre Heider wrote:
Quoted 47 lines · Pali Roh?r

Some Espressobin boards got assigned more than one MAC address. Update instructions how to correctly store and preserve all MAC addresses.

---
   doc/README.marvell | 23 +++++++++++++++++------
   1 file changed, 17 insertions(+), 6 deletions(-)
doc/README.marvell +13 -5
index 5416bc3035..6fc5ac8a40 100644
@@ -27,7 +27,7 @@ Build Procedure
   	- For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
   	- For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
   	- For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
-	- For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
+	- For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig"
   5. Configure the device-tree and build the U-Boot image:
@@ -62,11 +62,15 @@ Configuration update
   Permanent ethernet MAC address
   -------------------------------
   	Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup
-	permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC).
-	Some boards like EspressoBin have MAC address printed on sticker. To print current MAC
-	address run:
+	permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC).
+	Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned
+	only one address other may also more than one. To print current MAC addresses run:
   		# echo $ethaddr
+		# echo $eth1addr
+		# echo $eth2addr
+		# echo $eth3addr
+		# ...
   	MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03
   	and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot
@@ -75,13 +79,20 @@ Permanent ethernet MAC address
   	suggested to generate new random one.
   	After flashing new U-Boot version it is suggested to reset U-Boot env variables to default
-	and then set correct permanent ethernet MAC address.
+	and then set correct permanent ethernet MAC addresses.
   		# env default -a
   		# setenv ethaddr XX:XX:XX:XX:XX:XX
+		# setenv eth1addr XX:XX:XX:XX:XX:XX
+		# setenv eth2addr YY:YY:YY:YY:YY:YY
+		# setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
+		# ...
Quoted 8 lines

doc/README.marvell Permanent ethernet MAC address · line 95

Quoted 6 lines
doc/README.marvell +4 -1
   		# saveenv
-	Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address.
+	Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr
+	are optional per-port MAC addresses. When optional ethNaddr variables are not defined then
+	they are inherited from required ethaddr variable. eth1addr contains MAC address for the
+	wan port, other for particular lan ports.

I never tried, what does "inherit" mean? eth1addr=$ethaddr+1 and so on?

Quoted 1 line

It means that address for DSA port is same as address for main ethernet adapter (ethaddr). So ethNaddr = $ethaddr

Okay, nice.

Quoted 8 lines
Quoted 2 lines

And would port1=wan be correct for v7?

Yes.

https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git/diff/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts?h=for-next&id=b64d814257b027e29a474bcd660f6372490138c7

eth1addr is set to ethernet1 and ethernet1 is alias for &switch0port3 for V7. And switch0port3 is wan on V7.

For Linux, yes. But I meant u-boot, we don't have a v7 dts there. Doesn't that matter?

Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
doc/README.marvell +0 -0
   	Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as
   	U-Boot will inject it into kernel's device-tree.
 
#4 lore raw

PATCH 1/1 arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

Quoted 66 lines · On Saturday 26 September 2020 11:30:15 Andre Heider wrote:
Quoted 58 lines · Pali Roh?r
Quoted 48 lines · On Saturday 26 September 2020 11:16:12 Andre Heider wrote:
Quoted 47 lines · Pali Roh?r

Some Espressobin boards got assigned more than one MAC address. Update instructions how to correctly store and preserve all MAC addresses.

---
   doc/README.marvell | 23 +++++++++++++++++------
   1 file changed, 17 insertions(+), 6 deletions(-)
doc/README.marvell +13 -5
index 5416bc3035..6fc5ac8a40 100644
@@ -27,7 +27,7 @@ Build Procedure
   	- For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
   	- For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
   	- For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
-	- For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
+	- For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig"
   5. Configure the device-tree and build the U-Boot image:
@@ -62,11 +62,15 @@ Configuration update
   Permanent ethernet MAC address
   -------------------------------
   	Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup
-	permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC).
-	Some boards like EspressoBin have MAC address printed on sticker. To print current MAC
-	address run:
+	permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC).
+	Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned
+	only one address other may also more than one. To print current MAC addresses run:
   		# echo $ethaddr
+		# echo $eth1addr
+		# echo $eth2addr
+		# echo $eth3addr
+		# ...
   	MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03
   	and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot
@@ -75,13 +79,20 @@ Permanent ethernet MAC address
   	suggested to generate new random one.
   	After flashing new U-Boot version it is suggested to reset U-Boot env variables to default
-	and then set correct permanent ethernet MAC address.
+	and then set correct permanent ethernet MAC addresses.
   		# env default -a
   		# setenv ethaddr XX:XX:XX:XX:XX:XX
+		# setenv eth1addr XX:XX:XX:XX:XX:XX
+		# setenv eth2addr YY:YY:YY:YY:YY:YY
+		# setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
+		# ...
Quoted 8 lines

doc/README.marvell Permanent ethernet MAC address · line 95

Quoted 6 lines
doc/README.marvell +4 -1
   		# saveenv
-	Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address.
+	Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr
+	are optional per-port MAC addresses. When optional ethNaddr variables are not defined then
+	they are inherited from required ethaddr variable. eth1addr contains MAC address for the
+	wan port, other for particular lan ports.

I never tried, what does "inherit" mean? eth1addr=$ethaddr+1 and so on?

Quoted 1 line

It means that address for DSA port is same as address for main ethernet adapter (ethaddr). So ethNaddr = $ethaddr

Okay, nice.

Quoted 3 lines
Quoted 2 lines

And would port1=wan be correct for v7?

Quoted 8 lines
Quoted 5 lines

Yes.

https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git/diff/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts?h=for-next&id=b64d814257b027e29a474bcd660f6372490138c7

eth1addr is set to ethernet1 and ethernet1 is alias for &switch0port3 for V7. And switch0port3 is wan on V7.

For Linux, yes. But I meant u-boot, we don't have a v7 dts there. Doesn't that matter?

No, it does not matter. U-Boot loads DTB file supplied by user/boot script and inserts MAC address into it. So if user boots this U-Boot on V7 board and supply kernel's V7 DTB file then U-Boot inserts WAN mac address into ethernet1 alias which is linked to switch0port3 (wan).

So I think it is correct.

We do not need any V7 DTS file in U-Boot.

Quoted 6 lines
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
doc/README.marvell +0 -0
   	Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as
   	U-Boot will inject it into kernel's device-tree.
 
#5 lore raw

PATCH 1/1 arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

In reply to Pali Rohár
Quoted 4 lines · Pali Roh?r

Some Espressobin boards got assigned more than one MAC address. Update instructions how to correctly store and preserve all MAC addresses.

Quoted 60 lines
---
  doc/README.marvell | 23 +++++++++++++++++------
  1 file changed, 17 insertions(+), 6 deletions(-)
doc/README.marvell +17 -6
index 5416bc3035..6fc5ac8a40 100644
@@ -27,7 +27,7 @@ Build Procedure
  	- For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
  	- For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
  	- For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
-	- For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
+	- For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig"
 
  5. Configure the device-tree and build the U-Boot image:
 
@@ -62,11 +62,15 @@ Configuration update
  Permanent ethernet MAC address
  -------------------------------
  	Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup
-	permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC).
-	Some boards like EspressoBin have MAC address printed on sticker. To print current MAC
-	address run:
+	permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC).
+	Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned
+	only one address other may also more than one. To print current MAC addresses run:
 
  		# echo $ethaddr
+		# echo $eth1addr
+		# echo $eth2addr
+		# echo $eth3addr
+		# ...
 
  	MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03
  	and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot
@@ -75,13 +79,20 @@ Permanent ethernet MAC address
  	suggested to generate new random one.
 
  	After flashing new U-Boot version it is suggested to reset U-Boot env variables to default
-	and then set correct permanent ethernet MAC address.
+	and then set correct permanent ethernet MAC addresses.
 
  		# env default -a
  		# setenv ethaddr XX:XX:XX:XX:XX:XX
+		# setenv eth1addr XX:XX:XX:XX:XX:XX
+		# setenv eth2addr YY:YY:YY:YY:YY:YY
+		# setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
+		# ...
  		# saveenv
 
-	Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address.
+	Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr
+	are optional per-port MAC addresses. When optional ethNaddr variables are not defined then
+	they are inherited from required ethaddr variable. eth1addr contains MAC address for the
+	wan port, other for particular lan ports.
 
  	Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as
  	U-Boot will inject it into kernel's device-tree.
#6 lore raw

PATCH 1/1 arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

In reply to Pali Rohár
Quoted 4 lines · Pali Roh?r

Some Espressobin boards got assigned more than one MAC address. Update instructions how to correctly store and preserve all MAC addresses.

Applied to u-boot-marvell/master

Thanks,
Stefan

Quoted 50 lines
---
  doc/README.marvell | 23 +++++++++++++++++------
  1 file changed, 17 insertions(+), 6 deletions(-)
doc/README.marvell +13 -5
index 5416bc3035..6fc5ac8a40 100644
@@ -27,7 +27,7 @@ Build Procedure
  	- For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
  	- For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
  	- For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
-	- For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
+	- For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig"
 
  5. Configure the device-tree and build the U-Boot image:
 
@@ -62,11 +62,15 @@ Configuration update
  Permanent ethernet MAC address
  -------------------------------
  	Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup
-	permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC).
-	Some boards like EspressoBin have MAC address printed on sticker. To print current MAC
-	address run:
+	permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC).
+	Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned
+	only one address other may also more than one. To print current MAC addresses run:
 
  		# echo $ethaddr
+		# echo $eth1addr
+		# echo $eth2addr
+		# echo $eth3addr
+		# ...
 
  	MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03
  	and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot
@@ -75,13 +79,20 @@ Permanent ethernet MAC address
  	suggested to generate new random one.
 
  	After flashing new U-Boot version it is suggested to reset U-Boot env variables to default
-	and then set correct permanent ethernet MAC address.
+	and then set correct permanent ethernet MAC addresses.
 
  		# env default -a
  		# setenv ethaddr XX:XX:XX:XX:XX:XX
+		# setenv eth1addr XX:XX:XX:XX:XX:XX
+		# setenv eth2addr YY:YY:YY:YY:YY:YY
+		# setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
+		# ...

doc/README.marvell Permanent ethernet MAC address · line 98

Quoted 10 lines
doc/README.marvell +4 -1
  		# saveenv
 
-	Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address.
+	Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr
+	are optional per-port MAC addresses. When optional ethNaddr variables are not defined then
+	they are inherited from required ethaddr variable. eth1addr contains MAC address for the
+	wan port, other for particular lan ports.
 
  	Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as
  	U-Boot will inject it into kernel's device-tree.

Viele Gr??e,
Stefan

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de