hw/arm/virt: Introduce kvm-steal-time
v4 cover hw/arm/virt: Introduce kvm-steal-time
v4:
- Rebased to latest master
- Added an official linux header synch patch, replacing the hack patch used in v3
- Added a patch to restore the arm-cpu-features test for AArch64 that got lost in the meson shuffle
- Added Eric's R-b's
v3:
- Rebased: 5.2 machine type and kvm32 drop now included
- Switched to using new KVM cap that has been merged upstream
- Picked up some r-b's and some of Eric's comments from v2
v2: https://www.mail-archive.com/[email protected]/msg727588.html
KVM supports the ability to publish the amount of time that VCPUs were runnable, but not running due to other host threads running instead, to the guest. The guest scheduler may use that information when making decisions and the guest may expose it to its userspace (Linux publishes this information in /proc/stat). This feature is called "steal time" as it represents the amount of time stolen from a guest by scheduling out its VCPUs. To enable this feature KVM userspace must provide a memory region that will be used to publish the information to the guest. The memory region is typical migratable region. The GPA of the region is given to KVM through a VCPU device ioctl interface. This feature is only available for 64-bit guests per the Arm PVTIME specification (DEN0057A).
This series provides the QEMU support of this feature. It will be enabled by default for 5.2 machine types and later, but may be disabled with a new CPU property "kvm-steal-time".
Thanks,
drew
Andrew Jones (6):
linux headers: sync to 5.9-rc7
target/arm/kvm: Make uncalled stubs explicitly unreachable hw/arm/virt: Move post cpu realize check into its own function hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init tests/qtest: Restore aarch64 arm-cpu-features test hw/arm/virt: Implement kvm-steal-time
docs/system/arm/cpu-features.rst | 11 ++++ hw/arm/virt.c | 110 ++++++++++++++++++++++--------- include/hw/arm/virt.h | 5 ++ linux-headers/linux/kvm.h | 6 +- target/arm/cpu.c | 8 +++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 16 +++++ target/arm/kvm64.c | 64 ++++++++++++++++-- target/arm/kvm_arm.h | 94 ++++++++++++++++++++------ target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++-- tests/qtest/meson.build | 3 +- 12 files changed, 286 insertions(+), 62 deletions(-)
Signature · 1 line
2.26.2
PATCH v4 1/6 linux headers: sync to 5.9-rc7
Update against Linux 5.9-rc7.
--- linux-headers/linux/kvm.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
linux-headers/linux/kvm.h +4 -2
@@ -790,9 +790,10 @@ struct kvm_ppc_resize_hpt {#define KVM_VM_PPC_HV 1#define KVM_VM_PPC_PR 2 -/* on MIPS, 0 forces trap & emulate, 1 forces VZ ASE */ -#define KVM_VM_MIPS_TE 0 +/* on MIPS, 0 indicates auto, 1 forces VZ ASE, 2 forces trap & emulate */ +#define KVM_VM_MIPS_AUTO 0#define KVM_VM_MIPS_VZ 1 +#define KVM_VM_MIPS_TE 2#define KVM_S390_SIE_PAGE_OFFSET 1
@@ -1035,6 +1036,7 @@ struct kvm_ppc_resize_hpt {#define KVM_CAP_LAST_CPU 184#define KVM_CAP_SMALLER_MAXPHYADDR 185#define KVM_CAP_S390_DIAG318 186 +#define KVM_CAP_STEAL_TIME 187#ifdef KVM_CAP_IRQ_ROUTING
Signature · 1 line
2.26.2
PATCH v4 2/6 target/arm/kvm: Make uncalled stubs explicitly unreachable
In reply to Andrew JonesWhen we compile without KVM support !defined(CONFIG_KVM) we generate stubs for functions that the linker will still encounter. Sometimes these stubs can be executed safely and are placed in paths where they get executed with or without KVM. Other functions should never be called without KVM. Those functions should be guarded by kvm_enabled(), but should also be robust to refactoring mistakes. Putting a g_assert_not_reached() in the function should help. Additionally, the g_assert_not_reached() calls may actually help the linker remove some code.
We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't necessary at all - the only caller is in kvm.c
--- target/arm/kvm_arm.h | 51 +++++++++++++++++++++++++++----------------- 1 file changed, 32 insertions(+), 19 deletions(-)
target/arm/kvm_arm.h +32 -19
@@ -344,18 +344,10 @@ int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level);#else -static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) -{ -/* -* This should never actually be called in the "not KVM" case, -* but set up the fields to indicate an error anyway. -*/ - cpu->kvm_target =QEMU_KVM_ARM_TARGET_NONE ; - cpu->host_cpu_probe_failed = true; -} - -static inline void kvm_arm_add_vcpu_properties (Object *obj) {} - +/* +* It's safe to call these functions without KVM support. +* They should either do nothing or return "not supported". +*/ static inline bool kvm_arm_aarch32_supported (void ) {return false;
@@ -371,23 +363,44 @@ static inline bool kvm_arm_sve_supported(void) return false; } +/* +* These functions should never actually be called without KVM support. +*/ +static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) +{ +g_assert_not_reached (); +} + +static inline void kvm_arm_add_vcpu_properties (Object *obj) +{ +g_assert_not_reached (); +} +static inline int kvm_arm_get_max_vm_ipa_size (MachineState *ms) { -return -ENOENT ; +g_assert_not_reached (); }static inline int kvm_arm_vgic_probe (void ) { -return 0 ; +g_assert_not_reached (); } -static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) {} -static inline void kvm_arm_pmu_init (CPUState *cs) {} +static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) {} +static inline void kvm_arm_pmu_init (CPUState *cs) +{ +g_assert_not_reached (); +} + +static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_get_virtual_time (CPUState *cs) {} -static inline void kvm_arm_put_virtual_time (CPUState *cs) {}#endif static inline const char *gic_class_name (void )
Signature · 1 line
2.26.2
PATCH v4 3/6 hw/arm/virt: Move post cpu realize check into its own function
In reply to Andrew JonesWe'll add more to this new function in coming patches so we also state the gic must be created and call it below create_gic().
No functional change intended.
--- hw/arm/virt.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-)
hw/arm/virt.c +27 -16
@@ -1672,6 +1672,31 @@ static void finalize_gic_version(VirtMachineState *vms) } } +/* +* virt_cpu_post_init() must be called after the CPUs have +* been realized and the GIC has been created. +*/ +static void virt_cpu_post_init (VirtMachineState *vms) +{ +bool aarch64; + + aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + +if (!kvm_enabled ()) { +if (aarch64 && vms->highmem) { +int requested_pa_size =64 -clz64 (vms->highest_gpa); +int pamax =arm_pamax (ARM_CPU (first_cpu)); + +if (pamax < requested_pa_size) { +error_report ("VCPU supports less PA bits (%d) than " +"requested by the memory map (%d)" , + pamax, requested_pa_size); +exit (1 ); + } + } + } +} +static void machvirt_init (MachineState *machine) {VirtMachineState *vms =VIRT_MACHINE (machine);
@@ -1886,22 +1911,6 @@ static void machvirt_init(MachineState *machine)fdt_add_timer_nodes (vms);fdt_add_cpu_nodes (vms); -if (!kvm_enabled ()) { -ARMCPU *cpu =ARM_CPU (first_cpu); -bool aarch64 =object_property_get_bool (OBJECT (cpu),"aarch64" ,NULL ); - -if (aarch64 && vms->highmem) { -int requested_pa_size, pamax =arm_pamax (cpu); - - requested_pa_size =64 -clz64 (vms->highest_gpa); -if (pamax < requested_pa_size) { -error_report ("VCPU supports less PA bits (%d) than requested " -"by the memory map (%d)" , pamax, requested_pa_size); -exit (1 ); - } - } - } -memory_region_add_subregion (sysmem, vms->memmap[VIRT_MEM ].base, machine->ram);if (machine->device_memory) {
@@ -1913,6 +1922,8 @@ static void machvirt_init(MachineState *machine)create_gic (vms); +virt_cpu_post_init (vms); +fdt_add_pmu_nodes (vms);create_uart (vms,VIRT_UART , sysmem,serial_hd (0 ));
Signature · 1 line
2.26.2
PATCH v4 4/6 hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
In reply to Andrew JonesMove the KVM PMU setup part of fdt_add_pmu_nodes() to virt_cpu_post_init(), which is a more appropriate location. Now fdt_add_pmu_nodes() is also named more appropriately, because it no longer does anything but fdt node creation.
No functional change intended.
--- hw/arm/virt.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-)
hw/arm/virt.c +18 -16
@@ -521,21 +521,12 @@ static void fdt_add_gic_node(VirtMachineState *vms)static void fdt_add_pmu_nodes (const VirtMachineState *vms) { -CPUState *cpu; -ARMCPU *armcpu; +ARMCPU *armcpu =ARM_CPU (first_cpu);uint32_t irqflags =GIC_FDT_IRQ_FLAGS_LEVEL_HI ; -CPU_FOREACH (cpu) { - armcpu =ARM_CPU (cpu); -if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { -return ; - } -if (kvm_enabled ()) { -if (kvm_irqchip_in_kernel ()) { -kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); - } -kvm_arm_pmu_init (cpu); - } +if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { +assert (!object_property_get_bool (OBJECT (armcpu),"pmu" ,NULL )); +return ; }if (vms->gic_version ==VIRT_GIC_VERSION_2 ) {
@@ -544,7 +535,6 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) (1 << vms->smp_cpus) - 1); } - armcpu =ARM_CPU (qemu_get_cpu (0 ));qemu_fdt_add_subnode (vms->fdt,"/pmu" );if (arm_feature (&armcpu->env,ARM_FEATURE_V8 )) {const char compat[] ="arm,armv8-pmuv3" ;
@@ -1678,11 +1668,23 @@ static void finalize_gic_version(VirtMachineState *vms)*/ static void virt_cpu_post_init (VirtMachineState *vms) { -bool aarch64; +bool aarch64, pmu; +CPUState *cpu; aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + pmu =object_property_get_bool (OBJECT (first_cpu),"pmu" ,NULL ); -if (!kvm_enabled ()) { +if (kvm_enabled ()) { +CPU_FOREACH (cpu) { +if (pmu) { +assert (arm_feature (&ARM_CPU (cpu)->env,ARM_FEATURE_PMU )); +if (kvm_irqchip_in_kernel ()) { +kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); + } +kvm_arm_pmu_init (cpu); + } + } + }else {if (aarch64 && vms->highmem) {int requested_pa_size =64 -clz64 (vms->highest_gpa);int pamax =arm_pamax (ARM_CPU (first_cpu));
Signature · 1 line
2.26.2
PATCH v4 5/6 tests/qtest: Restore aarch64 arm-cpu-features test
In reply to Andrew Jonesarm-cpu-features got dropped from the AArch64 tests during the meson conversion shuffle.
--- tests/qtest/meson.build | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
tests/qtest/meson.build +2 -1
@@ -146,7 +146,8 @@ qtests_aarch64 = \ (cpu != 'arm' ? ['bios-tables-test'] : []) + \ (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \ (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \ - ['numa-test', + ['arm-cpu-features', + 'numa-test', 'boot-serial-test', 'migration-test']
Signature · 1 line
2.26.2
PATCH v4 6/6 hw/arm/virt: Implement kvm-steal-time
In reply to Andrew JonesWe add the kvm-steal-time CPU property and implement it for machvirt. A tiny bit of refactoring was also done to allow pmu and pvtime to use the same vcpu device helper functions.
--- docs/system/arm/cpu-features.rst | 11 ++++++ hw/arm/virt.c | 43 +++++++++++++++++++-- include/hw/arm/virt.h | 5 +++ target/arm/cpu.c | 8 ++++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 16 ++++++++ target/arm/kvm64.c | 64 +++++++++++++++++++++++++++++--- target/arm/kvm_arm.h | 43 +++++++++++++++++++++ target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++++++++-- 10 files changed, 208 insertions(+), 13 deletions(-)
docs/system/arm/cpu-features.rst +11 -0
@@ -200,6 +200,17 @@ the list of KVM VCPU features and their descriptions. adjustment, also restoring the legacy (pre-5.0) behavior. + kvm-steal-time Since v5.2, kvm-steal-time is enabled by + default when KVM is enabled, the feature is + supported, and the guest is 64-bit. + + When kvm-steal-time is enabled a 64-bit guest + can account for time its CPUs were not running + due to the host not scheduling the corresponding + VCPU threads. The accounting statistics may + influence the guest scheduler behavior and/or be + exposed to the guest userspace. + SVE CPU Properties ==================
hw/arm/virt.c +40 -3
88 lines not on this page · raw message
include/hw/arm/virt.h +5 -0
@@ -54,6 +54,9 @@#define PPI (irq) ((irq) + 16) +/* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ +#define PVTIME_SIZE_PER_CPU 64 +enum {VIRT_FLASH ,VIRT_MEM ,
@@ -81,6 +84,7 @@ enum {VIRT_PCDIMM_ACPI ,VIRT_ACPI_GED ,VIRT_NVDIMM_ACPI , +VIRT_PVTIME , VIRT_LOWMEMMAP_LAST, };
@@ -126,6 +130,7 @@ struct VirtMachineClass {bool no_highmem_ecam;bool no_ged;/* Machines < 4.2 has no support for ACPI GED device */ bool kvm_no_adjvtime; +bool no_kvm_steal_time;bool acpi_expose_flash; };
target/arm/cpu.c +8 -0
@@ -1310,6 +1310,14 @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)return ; } } + +if (kvm_enabled ()) { +kvm_arm_steal_time_finalize (cpu, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } + } }static void arm_cpu_realizefn (DeviceState *dev,Error **errp)
target/arm/cpu.h +4 -0
@@ -24,6 +24,7 @@#include "hw/registerfields.h" #include "cpu-qom.h" #include "exec/cpu-defs.h" +#include "qapi/qapi-types-common.h" /* ARM processors have a weak memory model */ #define TCG_GUEST_DEFAULT_MO (0)
@@ -863,6 +864,9 @@ struct ARMCPU {bool kvm_vtime_dirty;uint64_t kvm_vtime; +/* KVM steal time */ +OnOffAuto kvm_steal_time; +/* Uniprocessor system with MP extensions */ bool mp_is_up;
target/arm/kvm.c +16 -0
@@ -192,6 +192,16 @@ static void kvm_no_adjvtime_set(Object *obj, bool value, Error **errp)ARM_CPU (obj)->kvm_adjvtime = !value; } +static bool kvm_steal_time_get (Object *obj,Error **errp) +{ +return ARM_CPU (obj)->kvm_steal_time !=ON_OFF_AUTO_OFF ; +} + +static void kvm_steal_time_set (Object *obj,bool value,Error **errp) +{ +ARM_CPU (obj)->kvm_steal_time = value ?ON_OFF_AUTO_ON :ON_OFF_AUTO_OFF ; +} +/* KVM VCPU properties should be prefixed with "kvm-". */ void kvm_arm_add_vcpu_properties (Object *obj) {
@@ -207,6 +217,12 @@ void kvm_arm_add_vcpu_properties(Object *obj)"the virtual counter. VM stopped time " "will be counted."); } + + cpu->kvm_steal_time =ON_OFF_AUTO_AUTO ; +object_property_add_bool (obj,"kvm-steal-time" , kvm_steal_time_get, + kvm_steal_time_set); +object_property_set_description (obj,"kvm-steal-time" , +"Set off to disable KVM steal time." ); }bool kvm_arm_pmu_supported (void )
target/arm/kvm64.c +59 -5
115 lines not on this page · raw message
target/arm/kvm_arm.h +43 -0
67 lines not on this page · raw message
target/arm/monitor.c +1 -1
@@ -103,7 +103,7 @@ static const char *cpu_model_advertised_features[] = {"sve128" ,"sve256" ,"sve384" ,"sve512" ,"sve640" ,"sve768" ,"sve896" ,"sve1024" ,"sve1152" ,"sve1280" ,"sve1408" ,"sve1536" ,"sve1664" ,"sve1792" ,"sve1920" ,"sve2048" , -"kvm-no-adjvtime" , +"kvm-no-adjvtime" ,"kvm-steal-time" ,NULL };
tests/qtest/arm-cpu-features.c +21 -4
@@ -452,6 +452,7 @@ static void test_query_cpu_model_expansion(const void *data)assert_set_feature (qts,"max" ,"pmu" , true);assert_has_not_feature (qts,"max" ,"kvm-no-adjvtime" ); +assert_has_not_feature (qts,"max" ,"kvm-steal-time" );if (g_str_equal (qtest_get_arch (),"aarch64" )) {assert_has_feature_enabled (qts,"max" ,"aarch64" );
@@ -493,6 +494,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"kvm-no-adjvtime" , false);if (g_str_equal (qtest_get_arch (),"aarch64" )) { +bool kvm_supports_steal_time;bool kvm_supports_sve;char max_name[8 ], name[8 ];uint32_t max_vq, vq;
@@ -500,6 +502,10 @@ static void test_query_cpu_model_expansion_kvm(const void *data)QDict *resp;char *error; +assert_error (qts,"cortex-a15" , +"We cannot guarantee the CPU type 'cortex-a15' works " +"with KVM on this host" ,NULL ); +assert_has_feature_enabled (qts,"host" ,"aarch64" );/* Enabling and disabling pmu should always work. */
@@ -507,16 +513,26 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"pmu" , false);assert_set_feature (qts,"host" ,"pmu" , true); -assert_error (qts,"cortex-a15" , -"We cannot guarantee the CPU type 'cortex-a15' works " -"with KVM on this host" ,NULL ); - +/* +* Some features would be enabled by default, but they're disabled +* because this instance of KVM doesn't support them. Test that the +* features are present, and, when enabled, issue further tests. +*/ +assert_has_feature (qts,"host" ,"kvm-steal-time" );assert_has_feature (qts,"host" ,"sve" ); + resp =do_query_no_props (qts,"host" ); + kvm_supports_steal_time =resp_get_feature (resp,"kvm-steal-time" ); kvm_supports_sve =resp_get_feature (resp,"sve" ); vls =resp_get_sve_vls (resp);qobject_unref (resp); +if (kvm_supports_steal_time) { +/* If we have steal-time then we should be able to toggle it. */ +assert_set_feature (qts,"host" ,"kvm-steal-time" , false); +assert_set_feature (qts,"host" ,"kvm-steal-time" , true); + } +if (kvm_supports_sve) {g_assert (vls !=0 ); max_vq =64 -__builtin_clzll (vls);
@@ -577,6 +593,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_has_not_feature (qts,"host" ,"aarch64" );assert_has_not_feature (qts,"host" ,"pmu" );assert_has_not_feature (qts,"host" ,"sve" ); +assert_has_not_feature (qts,"host" ,"kvm-steal-time" ); }qtest_quit (qts);
Signature · 1 line
2.26.2
Re: [PATCH v4 6/6] hw/arm/virt: Implement kvm-steal-time
Review
Quoted 11 lines · Andrew Jones
We add the kvm-steal-time CPU property and implement it for machvirt. A tiny bit of refactoring was also done to allow pmu and pvtime to use the same vcpu device helper functions.
(quoted diff) +6
-0+ if (pvtime_size > pvtime_reg_size) { + error_report("pvtime requires a %ld byte memory region for " + "%d CPUs, but only %ld has been reserved", + pvtime_size, max_cpus, pvtime_reg_size); + exit(1); + }
This turns out not to compile on Windows:
../../hw/arm/virt.c:1693:30: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'hwaddr {aka long long unsigned int}' [-Werror=format=]
error_report("pvtime requires a %ld byte memory region for "
^
I'm going to squash this fix into the pullreq:
hw/arm/virt.c +0 -0
@@ -1690,8 +1690,9 @@ static void virt_cpu_post_init(VirtMachineState
*vms, int max_cpus,
pvtime_size = REAL_HOST_PAGE_ALIGN(pvtime_size);
if (pvtime_size > pvtime_reg_size) {- error_report("pvtime requires a %ld byte memory region for "
- "%d CPUs, but only %ld has been reserved",
+ error_report("pvtime requires a %" HWADDR_PRId
+ " byte memory region for %d CPUs,"
+ " but only %" HWADDR_PRId " has been reserved",
pvtime_size, max_cpus, pvtime_reg_size);
exit(1);
}thanks
-- PMM
Re: [PATCH v4 6/6] hw/arm/virt: Implement kvm-steal-time
Hi Peter,
Thanks for fixing this up and applying!
drew
Quoted 42 lines · Peter Maydell
Review
Quoted 11 lines · Andrew Jones
We add the kvm-steal-time CPU property and implement it for machvirt. A tiny bit of refactoring was also done to allow pmu and pvtime to use the same vcpu device helper functions.
(quoted diff) +6
-0+ if (pvtime_size > pvtime_reg_size) { + error_report("pvtime requires a %ld byte memory region for " + "%d CPUs, but only %ld has been reserved", + pvtime_size, max_cpus, pvtime_reg_size); + exit(1); + }This turns out not to compile on Windows:
../../hw/arm/virt.c:1693:30: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'hwaddr {aka long long unsigned int}' [-Werror=format=]
error_report("pvtime requires a %ld byte memory region for "
^I'm going to squash this fix into the pullreq:
hw/arm/virt.c +3
-2@@ -1690,8 +1690,9 @@ static void virt_cpu_post_init(VirtMachineState *vms, int max_cpus, pvtime_size =REAL_HOST_PAGE_ALIGN (pvtime_size);if (pvtime_size > pvtime_reg_size) { -error_report ("pvtime requires a %ld byte memory region for " -"%d CPUs, but only %ld has been reserved" , +error_report ("pvtime requires a %" HWADDR_PRId +" byte memory region for %d CPUs," +" but only %" HWADDR_PRId" has been reserved" , pvtime_size, max_cpus, pvtime_reg_size);exit (1 );}thanks
-- PMM
Peter Maydell
AppliedQuoted 9 lines · Andrew Jones
v4:
- Rebased to latest master
- Added an official linux header synch patch, replacing the hack patch used in v3
- Added a patch to restore the arm-cpu-features test for AArch64 that got lost in the meson shuffle
- Added Eric's R-b's
Quoted 6 lines
v3:
- Rebased: 5.2 machine type and kvm32 drop now included
- Switched to using new KVM cap that has been merged upstream
- Picked up some r-b's and some of Eric's comments from v2v2: https://www.mail-archive.com/[email protected]/msg727588.html
Applied to target-arm.next, thanks.
-- PMM