arm64: dts: meson: add more GX soundcards
Subsystems (2)
v2 cover arm64: dts: meson: add more GX soundcards
This series adds basic support for LPCM audio over HDMI and S/PDIF interfaces to GXBB/GXL/GXM devices without support. I'm sure audio support can be extended in places (some devices have internal DACs and headphone hardware) but this gets the basics working.
I have personally tested with the khadas-vim2, odroid-c2, and both wetek devices as I have them, and there are positive forum reports from users with vega-s95 and some no-name P20X box devices.
Changes from v1
- Drop nexbox-a1 and rbox-pro changes - the regulator changes are needed to get the dts to compile, but I do not have schematics to validate the changes or the hardware to test with.
Christian Hewitt (10):
arm64: dts: meson: add audio playback to a95x
arm64: dts: meson: add audio playback to khadas-vim2
arm64: dts: meson: add audio playback to nanopi-k2
arm64: dts: meson: add audio playback to odroid-c2
arm64: dts: meson: add audio playback to p201
arm64: dts: meson: add audio playback to p200
arm64: dts: meson: add audio playback to p212-s905x dtsi
arm64: dts: meson: add audio playback to vega-s95 dtsi
arm64: dts: meson: add audio playback to wetek-hub
arm64: dts: meson: add audio playback to wetek-play2
.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 40 ++++++++++++ .../dts/amlogic/meson-gxbb-nexbox-a95x.dts | 40 ++++++++++++ .../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 40 ++++++++++++ .../boot/dts/amlogic/meson-gxbb-p200.dts | 61 +++++++++++++++++++ .../boot/dts/amlogic/meson-gxbb-p201.dts | 40 ++++++++++++ .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 61 +++++++++++++++++++ .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 40 ++++++++++++ .../dts/amlogic/meson-gxbb-wetek-play2.dts | 61 +++++++++++++++++++ .../dts/amlogic/meson-gxl-s905x-p212.dtsi | 40 ++++++++++++ .../dts/amlogic/meson-gxm-khadas-vim2.dts | 44 ++++++++++++- 10 files changed, 464 insertions(+), 3 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/10 arm64: dts: meson: add audio playback to a95x
Add initial audio support limited to HDMI i2s.
--- .../dts/amlogic/meson-gxbb-nexbox-a95x.dts | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +40 -0
@@ -10,6 +10,7 @@ #include "meson-gxbb.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "nexbox,a95x", "amlogic,meson-gxbb";
@@ -139,6 +140,45 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-NEXBOX-A95X"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &cvbs_vdac_port {
Signature · 1 line
2.17.1
PATCH v2 2/10 arm64: dts: meson: add audio playback to khadas-vim2
In reply to Christian HewittAdd initial audio support limited to HDMI i2s.
--- .../dts/amlogic/meson-gxm-khadas-vim2.dts | 44 +++++++++++++++++-- 1 file changed, 41 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +41 -3
@@ -7,9 +7,9 @@ /dts-v1/; -#include <dt-bindings/input/input.h> - #include "meson-gxm.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
@@ -145,6 +145,45 @@ clock-frequency = <32768>; pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXM-KHADAS-VIM2"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &cec_AO {
@@ -154,7 +193,6 @@ hdmi-phandle = <&hdmi_tx>; }; - &cpu_cooling_maps { map0 { cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
Signature · 1 line
2.17.1
PATCH v2 3/10 arm64: dts: meson: add audio playback to nanopi-k2
In reply to Christian HewittAdd initial audio support limited to HDMI i2s.
--- .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +40 -0
@@ -7,6 +7,7 @@ #include "meson-gxbb.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
@@ -130,6 +131,45 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-NANOPI-K2"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &cec_AO {
Signature · 1 line
2.17.1
PATCH v2 4/10 arm64: dts: meson: add audio playback to odroid-c2
In reply to Christian HewittAdd initial audio support limited to HDMI i2s.
--- .../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +40 -0
@@ -9,6 +9,7 @@ #include "meson-gxbb.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
@@ -172,6 +173,45 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-ODROID-C2"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &cec_AO {
Signature · 1 line
2.17.1
PATCH v2 5/10 arm64: dts: meson: add audio playback to p201
In reply to Christian HewittAdd initial audio support limited to HDMI i2s.
--- .../boot/dts/amlogic/meson-gxbb-p201.dts | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +40 -0
@@ -8,10 +8,50 @@ /dts-v1/; #include "meson-gxbb-p20x.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "amlogic,p201", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P201 Development Board"; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-P201"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; ðmac {
Signature · 1 line
2.17.1
PATCH v2 6/10 arm64: dts: meson: add audio playback to p200
In reply to Christian HewittAdd initial support limited to HDMI i2s and SPDIF (LPCM).
--- .../boot/dts/amlogic/meson-gxbb-p200.dts | 61 +++++++++++++++++++ 1 file changed, 61 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +61 -0
@@ -9,11 +9,19 @@ #include "meson-gxbb-p20x.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "amlogic,p200", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P200 Development Board"; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + avdd18_usb_adc: regulator-avdd18_usb_adc { compatible = "regulator-fixed"; regulator-name = "AVDD18_USB_ADC";
@@ -57,6 +65,59 @@ press-threshold-microvolt = <0>; /* 0% */ }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-P200"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; }; ðmac {
Signature · 1 line
2.17.1
PATCH v2 7/10 arm64: dts: meson: add audio playback to p212-s905x dtsi
In reply to Christian HewittAdd initial audio support limited to HDMI i2s.
--- .../dts/amlogic/meson-gxl-s905x-p212.dtsi | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +40 -0
@@ -11,6 +11,7 @@ /* Common DTSI for devices which are based on the P212 reference board. */ #include "meson-gxl-s905x.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { aliases {
@@ -85,6 +86,45 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXL-S905X-P212"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; ðmac {
Signature · 1 line
2.17.1
PATCH v2 8/10 arm64: dts: meson: add audio playback to vega-s95 dtsi
In reply to Christian HewittAdd initial support limited to HDMI i2s and SPDIF (LPCM).
--- .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 61 +++++++++++++++++++ 1 file changed, 61 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +61 -0
@@ -4,6 +4,7 @@ */ #include "meson-gxbb.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
@@ -17,6 +18,13 @@ stdout-path = "serial0:115200n8"; }; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + leds { compatible = "gpio-leds";
@@ -97,6 +105,59 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-VEGA-S95"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; }; &cec_AO {
Signature · 1 line
2.17.1
PATCH v2 9/10 arm64: dts: meson: add audio playback to wetek-hub
In reply to Christian HewittAdd initial audio support limited to HDMI i2s.
--- .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +40 -0
@@ -7,10 +7,50 @@ /dts-v1/; #include "meson-gxbb-wetek.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "wetek,hub", "amlogic,meson-gxbb"; model = "WeTek Hub"; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-WETEK-HUB"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &ir {
Signature · 1 line
2.17.1
PATCH v2 10/10 arm64: dts: meson: add audio playback to wetek-play2
In reply to Christian HewittAdd initial support limited to HDMI i2s and SPDIF (LPCM).
--- .../dts/amlogic/meson-gxbb-wetek-play2.dts | 61 +++++++++++++++++++ 1 file changed, 61 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +61 -0
@@ -8,11 +8,19 @@ #include "meson-gxbb-wetek.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "wetek,play2", "amlogic,meson-gxbb"; model = "WeTek Play 2"; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + leds { led-wifi { label = "wetek-play:wifi-status";
@@ -39,6 +47,59 @@ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-WETEK-PLAY2"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; }; &i2c_A {
Signature · 1 line
2.17.1
Jerome Brunet
reviewerQuoted 8 lines · Christian Hewitt
This series adds basic support for LPCM audio over HDMI and S/PDIF interfaces to GXBB/GXL/GXM devices without support. I'm sure audio support can be extended in places (some devices have internal DACs and headphone hardware) but this gets the basics working.
I have personally tested with the khadas-vim2, odroid-c2, and both wetek devices as I have them, and there are positive forum reports from users with vega-s95 and some no-name P20X box devices.
It is fine to add what you have tested but I'm not confortable adding untested stuff which will later give the false idea that they are supposed to work.
Amplifiers and codec may require different settings and ressources (such as GPIO and regulators) to actually operate properly.
As far the p200 and p201, like the g12 u200, those are reference design with various sound card possibilities which usually don't apply to end products.
For example the p200 is missing both input and output codecs, the sound amplifier and, as it stands, is likely to be muted.
Quoted 29 lines
Changes from v1
- Drop nexbox-a1 and rbox-pro changes - the regulator changes are needed to get the dts to compile, but I do not have schematics to validate the changes or the hardware to test with.Christian Hewitt (10):
arm64: dts: meson: add audio playback to a95x
arm64: dts: meson: add audio playback to khadas-vim2
arm64: dts: meson: add audio playback to nanopi-k2
arm64: dts: meson: add audio playback to odroid-c2
arm64: dts: meson: add audio playback to p201
arm64: dts: meson: add audio playback to p200
arm64: dts: meson: add audio playback to p212-s905x dtsi
arm64: dts: meson: add audio playback to vega-s95 dtsi
arm64: dts: meson: add audio playback to wetek-hub
arm64: dts: meson: add audio playback to wetek-play2.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 40 ++++++++++++ .../dts/amlogic/meson-gxbb-nexbox-a95x.dts | 40 ++++++++++++ .../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 40 ++++++++++++ .../boot/dts/amlogic/meson-gxbb-p200.dts | 61 +++++++++++++++++++ .../boot/dts/amlogic/meson-gxbb-p201.dts | 40 ++++++++++++ .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 61 +++++++++++++++++++ .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 40 ++++++++++++ .../dts/amlogic/meson-gxbb-wetek-play2.dts | 61 +++++++++++++++++++ .../dts/amlogic/meson-gxl-s905x-p212.dtsi | 40 ++++++++++++ .../dts/amlogic/meson-gxm-khadas-vim2.dts | 44 ++++++++++++- 10 files changed, 464 insertions(+), 3 deletions(-)