Skip to contentSkip to conversation

arm64: dts: meson: add more GX soundcards

PATCH Applied Christian Hewitt 2 participants 9 messages Dec 3, 2020 – Dec 7, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v4 cover arm64: dts: meson: add more GX soundcards

This series adds basic support for LPCM audio over HDMI and S/PDIF to GXBB/GXL/GXM devices that I own and have tested with. Audio can be extended in the future (some devices have DACs and headphone hardware to connect) but this gets the basics working.

Changes from v3
- Drop includes tidying in patches 2,3
- Add Jerome's acks

Changes from v2
- Drop p200/p201/p212-s905x/vega-s95 changes
- Add khadas-vim(1)

Changes from v1
- Drop nexbox-a1 and rbox-pro

Christian Hewitt (7):
arm64: dts: meson: add audio playback to a95x
arm64: dts: meson: add audio playback to khadas-vim
arm64: dts: meson: add audio playback to khadas-vim2
arm64: dts: meson: add audio playback to nanopi-k2
arm64: dts: meson: add audio playback to odroid-c2
arm64: dts: meson: add audio playback to wetek-hub
arm64: dts: meson: add audio playback to wetek-play2

 .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 40 ++++++++++++
 .../dts/amlogic/meson-gxbb-nexbox-a95x.dts    | 40 ++++++++++++
 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 40 ++++++++++++
 .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 40 ++++++++++++
 .../dts/amlogic/meson-gxbb-wetek-play2.dts    | 61 +++++++++++++++++++
 .../amlogic/meson-gxl-s905x-khadas-vim.dts    | 43 ++++++++++++-
 .../dts/amlogic/meson-gxm-khadas-vim2.dts     | 44 ++++++++++++-
 7 files changed, 303 insertions(+), 5 deletions(-)
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#1 lore raw

PATCH v4 1/7 arm64: dts: meson: add audio playback to a95x

Add initial audio support limited to HDMI i2s.

---
 .../dts/amlogic/meson-gxbb-nexbox-a95x.dts    | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +40 -0
index 67d901ed2fa3..b5b11cb9f393 100644
@@ -10,6 +10,7 @@
 #include "meson-gxbb.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "nexbox,a95x", "amlogic,meson-gxbb";
@@ -139,6 +140,45 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXBB-NEXBOX-A95X";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
 };
 
 &cvbs_vdac_port {
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#2 lore raw

PATCH v4 2/7 arm64: dts: meson: add audio playback to khadas-vim

In reply to Christian Hewitt

Add initial audio support limited to HDMI i2s.

---
 .../amlogic/meson-gxl-s905x-khadas-vim.dts    | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +40 -0
index 638a5992d760..7aa08f74c49b 100644
@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
@@ -63,6 +64,45 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXL-KHADAS-VIM1";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
 };
 
 &cec_AO {
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#3 lore raw

PATCH v4 3/7 arm64: dts: meson: add audio playback to khadas-vim2

In reply to Christian Hewitt

Add initial audio support limited to HDMI i2s.

---
 .../dts/amlogic/meson-gxm-khadas-vim2.dts     | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +40 -0
index c5ee55caae0a..0250c98dbe9e 100644
@@ -10,6 +10,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "meson-gxm.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
@@ -145,6 +146,45 @@
 		clock-frequency = <32768>;
 		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXM-KHADAS-VIM2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
 };
 
 &cec_AO {
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#4 lore raw

PATCH v4 4/7 arm64: dts: meson: add audio playback to nanopi-k2

In reply to Christian Hewitt

Add initial audio support limited to HDMI i2s.

---
 .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +40 -0
index 7be3e354093b..8e5df00b06a2 100644
@@ -7,6 +7,7 @@
 
 #include "meson-gxbb.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
@@ -130,6 +131,45 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXBB-NANOPI-K2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
 };
 
 &cec_AO {
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#5 lore raw

PATCH v4 5/7 arm64: dts: meson: add audio playback to odroid-c2

In reply to Christian Hewitt

Add initial audio support limited to HDMI i2s.

---
 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +40 -0
index 70fcfb7b0683..9d8c919c6e19 100644
@@ -9,6 +9,7 @@
 
 #include "meson-gxbb.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
@@ -172,6 +173,45 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXBB-ODROID-C2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
 };
 
 &cec_AO {
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#6 lore raw

PATCH v4 6/7 arm64: dts: meson: add audio playback to wetek-hub

In reply to Christian Hewitt

Add initial audio support limited to HDMI i2s.

---
 .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +40 -0
index 83b985bb015e..0c1570153842 100644
@@ -7,10 +7,50 @@
 /dts-v1/;
 
 #include "meson-gxbb-wetek.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "wetek,hub", "amlogic,meson-gxbb";
 	model = "WeTek Hub";
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXBB-WETEK-HUB";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
 };
 
 &ir {
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#7 lore raw

PATCH v4 7/7 arm64: dts: meson: add audio playback to wetek-play2

In reply to Christian Hewitt

Add initial support limited to HDMI i2s and SPDIF (LPCM).

---
 .../dts/amlogic/meson-gxbb-wetek-play2.dts    | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +61 -0
index 2ab8a3d10079..f2562c7de67c 100644
@@ -8,11 +8,19 @@
 
 #include "meson-gxbb-wetek.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "wetek,play2", "amlogic,meson-gxbb";
 	model = "WeTek Play 2";
 
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
 	leds {
 		led-wifi {
 			label = "wetek-play:wifi-status";
@@ -39,6 +47,59 @@
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXBB-WETEK-PLAY2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
 };
 
 &i2c_A {
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
maintainer Applied
#8 lore raw
In reply to Christian Hewitt
Quoted 10 lines · Christian Hewitt

This series adds basic support for LPCM audio over HDMI and S/PDIF to GXBB/GXL/GXM devices that I own and have tested with. Audio can be extended in the future (some devices have DACs and headphone hardware to connect) but this gets the basics working.

Changes from v3
- Drop includes tidying in patches 2,3
- Add Jerome's acks

[...]

Applied, thanks!

[1/7] arm64: dts: meson: add audio playback to a95x

      commit: ec78dc8964bbc68d76d0e9b132379bc3f22c72a6
[2/7] arm64: dts: meson: add audio playback to khadas-vim
      commit: 4e0649f4957436cbce20ffc26239fdbe19638444
[3/7] arm64: dts: meson: add audio playback to khadas-vim2
      commit: 0157e1a63c7685dfeee4e7cfd22635ebf104f64f
[4/7] arm64: dts: meson: add audio playback to nanopi-k2
      commit: 6a74f78c34e7503e35da724cdc555f26ea8d1cd1
[5/7] arm64: dts: meson: add audio playback to odroid-c2
      commit: ba414bc5484873bb157e63ba8684d59e27feaeb2
[6/7] arm64: dts: meson: add audio playback to wetek-hub
      commit: e0d9e6eead35be9842aae14f424f2d2ab0be0678
[7/7] arm64: dts: meson: add audio playback to wetek-play2
      commit: 5e3ee48ea072a6fd2c46c552d013e047dc54d1c6

Best regards,

Signature · 6 lines
Kevin Hilman <[email protected]>

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic