Skip to contentSkip to conversation

Convert remaining submodules to meson, cleanup env var handling

PATCH In review Paolo Bonzini 3 participants 8 messages Oct 5, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover Convert remaining submodules to meson, cleanup env var handling

The main purpose of this series is to have a correct and consistent handling of CFLAGS/CXXFLAGS/LDFLAGS environment variables:

- correct: avoid that the -pie flag, used for the compiler checks in the configure script, ends up being passed to Meson if an LDFLAGS environment variable exists (patch 3)

- consistent: ensure that CFLAGS that are set in the configure script are persistent even if Meson is restarted; to do so, make the configure script store them in the cross file it generates.

In order to avoid having to deal with recursive make, patches 1 and 2 integrate the Meson-based build system with the build of embedded slirp and libfdt. This follows the lead of Richard's patches to do the same with Capstone.

Based-on: <[email protected]>
Supersedes: <[email protected]>

Paolo Bonzini (4):
slirp: Convert Makefile bits to meson bits
dtc: Convert Makefile bits to meson bits
configure: do not clobber environment CFLAGS/CXXFLAGS/LDFLAGS
configure: consistently pass CFLAGS/CXXFLAGS/LDFLAGS to meson

 Makefile                                      |  28 +--
 configure                                     | 222 +++++-------------
 default-configs/targets/aarch64-softmmu.mak   |   1 +
 default-configs/targets/arm-softmmu.mak       |   1 +
 .../targets/microblaze-softmmu.mak            |   1 +
 .../targets/microblazeel-softmmu.mak          |   1 +
 default-configs/targets/mips64el-softmmu.mak  |   1 +
 default-configs/targets/ppc-softmmu.mak       |   1 +
 default-configs/targets/ppc64-softmmu.mak     |   1 +
 default-configs/targets/riscv32-softmmu.mak   |   1 +
 default-configs/targets/riscv64-softmmu.mak   |   1 +
 default-configs/targets/rx-softmmu.mak        |   1 +
 meson.build                                   | 164 +++++++++++--
 meson_options.txt                             |   6 +
 net/meson.build                               |   2 +-
 tests/qtest/meson.build                       |   6 +-
 16 files changed, 225 insertions(+), 213 deletions(-)
Signature · 1 line
2.26.2
#1 lore raw

PATCH 1/4 slirp: Convert Makefile bits to meson bits

SLIRP uses Meson so it could become a subproject in the future, but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).

For now, build the library via the main meson.build just like for capstone.

This improves the current state of affairs in that we will re-link the qemu executables against a changed libslirp.a, which we wouldn't do before-hand.

---
 Makefile                |  7 +---
 configure               | 68 ++++---------------------------
 meson.build             | 90 +++++++++++++++++++++++++++++++++++++----
 meson_options.txt       |  3 ++
 net/meson.build         |  2 +-
 tests/qtest/meson.build |  6 +--
 6 files changed, 99 insertions(+), 77 deletions(-)
Makefile +1 -6
index f27bd4b2eb..9d6b7fc8c0 100644
@@ -163,12 +163,7 @@ dtc/%: .git-submodule-status
 capstone/all:
 
 .PHONY: slirp/all
-slirp/all: .git-submodule-status
-	$(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp		\
-		BUILD_DIR="$(BUILD_DIR)/slirp" 			\
-		PKG_CONFIG="$(PKG_CONFIG)" 				\
-		CC="$(CC)" AR="$(AR)" 	LD="$(LD)" RANLIB="$(RANLIB)"	\
-		CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)")
+slirp/all:
 
 ROM_DIRS = $(addprefix pc-bios/, $(ROMS))
 ROM_DIRS_RULES=$(foreach t, all clean, $(addsuffix /$(t), $(ROM_DIRS)))
configure +8 -60

103 lines not on this page · raw message

meson.build +83 -7

109 lines not on this page · raw message

meson_options.txt +3 -0
index a0455d8a95..8a362fb08d 100644
@@ -52,3 +52,6 @@ option('xkbcommon', type : 'feature', value : 'auto',
 option('capstone', type: 'combo', value: 'auto',
        choices: ['disabled', 'enabled', 'auto', 'system', 'internal'],
        description: 'Whether and how to find the capstone library')
+option('slirp', type: 'combo', value: 'auto',
+       choices: ['disabled', 'enabled', 'auto', 'system', 'internal'],
+       description: 'Whether and how to find the slirp library')
net/meson.build +1 -1
index 6c2ec47dd5..1c7e3a3cb9 100644
@@ -18,7 +18,7 @@ softmmu_ss.add(files(
 ))
 
 softmmu_ss.add(when: 'CONFIG_L2TPV3', if_true: files('l2tpv3.c'))
-softmmu_ss.add(when: ['CONFIG_SLIRP', slirp], if_true: files('slirp.c'))
+softmmu_ss.add(when: slirp, if_true: files('slirp.c'))
 softmmu_ss.add(when: ['CONFIG_VDE', vde], if_true: files('vde.c'))
 softmmu_ss.add(when: 'CONFIG_NETMAP', if_true: files('netmap.c'))
 vhost_user_ss = ss.source_set()
tests/qtest/meson.build +3 -3
index 4f7757ee93..ad33ac311d 100644
@@ -23,7 +23,7 @@ qtests_pci = \
   (config_all_devices.has_key('CONFIG_IVSHMEM_DEVICE') ? ['ivshmem-test'] : [])
 
 qtests_i386 = \
-  (config_host.has_key('CONFIG_SLIRP') ? ['pxe-test', 'test-netfilter'] : []) +             \
+  (slirp.found() ? ['pxe-test', 'test-netfilter'] : []) +             \
   (config_host.has_key('CONFIG_POSIX') ? ['test-filter-mirror'] : []) +                     \
   (have_tools ? ['ahci-test'] : []) +                                                       \
   (config_all_devices.has_key('CONFIG_ISA_TESTDEV') ? ['endianness-test'] : []) +           \
@@ -117,7 +117,7 @@ qtests_ppc64 = \
   (config_all_devices.has_key('CONFIG_PSERIES') ? ['device-plug-test'] : []) +               \
   (config_all_devices.has_key('CONFIG_POWERNV') ? ['pnv-xscom-test'] : []) +                 \
   (config_all_devices.has_key('CONFIG_PSERIES') ? ['rtas-test'] : []) +                      \
-  (config_host.has_key('CONFIG_SLIRP') ? ['pxe-test', 'test-netfilter'] : []) +              \
+  (slirp.found() ? ['pxe-test', 'test-netfilter'] : []) +              \
   (config_all_devices.has_key('CONFIG_USB_UHCI') ? ['usb-hcd-uhci-test'] : []) +             \
   (config_all_devices.has_key('CONFIG_USB_XHCI_NEC') ? ['usb-hcd-xhci-test'] : []) +         \
   (config_host.has_key('CONFIG_POSIX') ? ['test-filter-mirror'] : []) +                      \
@@ -151,7 +151,7 @@ qtests_aarch64 = \
    'migration-test']
 
 qtests_s390x = \
-  (config_host.has_key('CONFIG_SLIRP') ? ['pxe-test', 'test-netfilter'] : []) +                 \
+  (slirp.found() ? ['pxe-test', 'test-netfilter'] : []) +                 \
   (config_host.has_key('CONFIG_POSIX') ? ['test-filter-mirror'] : []) +                         \
   (config_host.has_key('CONFIG_POSIX') ? ['test-filter-redirector'] : []) +                     \
   ['boot-serial-test',
Signature · 1 line
2.26.2
#2 lore raw

PATCH 2/4 dtc: Convert Makefile bits to meson bits

In reply to Paolo Bonzini

Build the library via the main meson.build just like for capstone. This improves the current state of affairs in that we will re-link the qemu executables against a changed libfdt.a, which we wouldn't do before-hand, and lets us remove the whole recursive make machinery.

The list of targets that require FDT is now obtained from default-configs/ instead of being hardcoded in the configure script.

---
 Makefile                                      | 23 +----
 configure                                     | 93 ++++---------------
 default-configs/targets/aarch64-softmmu.mak   |  1 +
 default-configs/targets/arm-softmmu.mak       |  1 +
 .../targets/microblaze-softmmu.mak            |  1 +
 .../targets/microblazeel-softmmu.mak          |  1 +
 default-configs/targets/mips64el-softmmu.mak  |  1 +
 default-configs/targets/ppc-softmmu.mak       |  1 +
 default-configs/targets/ppc64-softmmu.mak     |  1 +
 default-configs/targets/riscv32-softmmu.mak   |  1 +
 default-configs/targets/riscv64-softmmu.mak   |  1 +
 default-configs/targets/rx-softmmu.mak        |  1 +
 meson.build                                   | 61 ++++++++++--
 meson_options.txt                             |  3 +
 14 files changed, 84 insertions(+), 106 deletions(-)
Makefile +0 -22
index 9d6b7fc8c0..c37e513431 100644
@@ -142,28 +142,6 @@ SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet)
 include $(SRC_PATH)/tests/Makefile.include
 
 all: recurse-all
-Makefile: $(addsuffix /all, $(SUBDIRS))
-
-# LIBFDT_lib="": avoid breaking existing trees with objects requiring -fPIC
-DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_lib=""
-DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
-DTC_CPPFLAGS=-I$(SRC_PATH)/dtc/libfdt
-
-.PHONY: dtc/all
-dtc/all: .git-submodule-status dtc/libfdt
-	$(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt,)
-
-dtc/%: .git-submodule-status
-	@mkdir -p $@
-
-# Retain for a while so that incremental build across this patch
-# does not raise an error for missing target "capstone/all", which
-# comes from the saved SUBDIRS value.
-.PHONY: capstone/all
-capstone/all:
-
-.PHONY: slirp/all
-slirp/all:
 
 ROM_DIRS = $(addprefix pc-bios/, $(ROMS))
 ROM_DIRS_RULES=$(foreach t, all clean, $(addsuffix /$(t), $(ROM_DIRS)))
configure +16 -77

147 lines not on this page · raw message

default-configs/targets/aarch64-softmmu.mak +1 -0
index a8c0174fc3..7703127674 100644
@@ -2,3 +2,4 @@ TARGET_ARCH=aarch64
 TARGET_BASE_ARCH=arm
 TARGET_SUPPORTS_MTTCG=y
 TARGET_XML_FILES= gdb-xml/aarch64-core.xml gdb-xml/aarch64-fpu.xml gdb-xml/arm-core.xml gdb-xml/arm-vfp.xml gdb-xml/arm-vfp3.xml gdb-xml/arm-neon.xml gdb-xml/arm-m-profile.xml
+TARGET_NEED_FDT=y
default-configs/targets/arm-softmmu.mak +1 -0
index 9b1a7f37c6..84a98f4818 100644
@@ -1,3 +1,4 @@
 TARGET_ARCH=arm
 TARGET_SUPPORTS_MTTCG=y
 TARGET_XML_FILES= gdb-xml/arm-core.xml gdb-xml/arm-vfp.xml gdb-xml/arm-vfp3.xml gdb-xml/arm-neon.xml gdb-xml/arm-m-profile.xml
+TARGET_NEED_FDT=y
default-configs/targets/microblaze-softmmu.mak +1 -0
index 0b5c78ef00..33f2a00402 100644
@@ -1,3 +1,4 @@
 TARGET_ARCH=microblaze
 TARGET_WORDS_BIGENDIAN=y
 TARGET_SUPPORTS_MTTCG=y
+TARGET_NEED_FDT=y
default-configs/targets/microblazeel-softmmu.mak +1 -0
index dc822219d8..af40391f2f 100644
@@ -1,2 +1,3 @@
 TARGET_ARCH=microblaze
 TARGET_SUPPORTS_MTTCG=y
+TARGET_NEED_FDT=y
default-configs/targets/mips64el-softmmu.mak +1 -0
index b751ae1bcf..5a52aa4b64 100644
@@ -1,3 +1,4 @@
 TARGET_ARCH=mips64
 TARGET_BASE_ARCH=mips
 TARGET_ALIGNED_ONLY=y
+TARGET_NEED_FDT=y
default-configs/targets/ppc-softmmu.mak +1 -0
index ef69037a2c..f4eef1819a 100644
@@ -1,3 +1,4 @@
 TARGET_ARCH=ppc
 TARGET_WORDS_BIGENDIAN=y
 TARGET_XML_FILES= gdb-xml/power-core.xml gdb-xml/power-fpu.xml gdb-xml/power-altivec.xml gdb-xml/power-spe.xml
+TARGET_NEED_FDT=y
default-configs/targets/ppc64-softmmu.mak +1 -0
index 0fde2d02b9..84fbf46be9 100644
@@ -3,3 +3,4 @@ TARGET_BASE_ARCH=ppc
 TARGET_WORDS_BIGENDIAN=y
 TARGET_SUPPORTS_MTTCG=y
 TARGET_XML_FILES= gdb-xml/power64-core.xml gdb-xml/power-fpu.xml gdb-xml/power-altivec.xml gdb-xml/power-spe.xml gdb-xml/power-vsx.xml
+TARGET_NEED_FDT=y
default-configs/targets/riscv32-softmmu.mak +1 -0
index 4544e1ae9a..9446d96d13 100644
@@ -2,3 +2,4 @@ TARGET_ARCH=riscv32
 TARGET_BASE_ARCH=riscv
 TARGET_SUPPORTS_MTTCG=y
 TARGET_XML_FILES= gdb-xml/riscv-32bit-cpu.xml gdb-xml/riscv-32bit-fpu.xml gdb-xml/riscv-64bit-fpu.xml gdb-xml/riscv-32bit-csr.xml gdb-xml/riscv-32bit-virtual.xml
+TARGET_NEED_FDT=y
default-configs/targets/riscv64-softmmu.mak +1 -0
index 6ce0b283cf..d809bd666a 100644
@@ -2,3 +2,4 @@ TARGET_ARCH=riscv64
 TARGET_BASE_ARCH=riscv
 TARGET_SUPPORTS_MTTCG=y
 TARGET_XML_FILES= gdb-xml/riscv-64bit-cpu.xml gdb-xml/riscv-32bit-fpu.xml gdb-xml/riscv-64bit-fpu.xml gdb-xml/riscv-64bit-csr.xml gdb-xml/riscv-64bit-virtual.xml
+TARGET_NEED_FDT=y
default-configs/targets/rx-softmmu.mak +1 -0
index 2d410e0b0c..0c458b2d07 100644
@@ -1,2 +1,3 @@
 TARGET_ARCH=rx
 TARGET_XML_FILES= gdb-xml/rx-core.xml
+TARGET_NEED_FDT=y
meson.build +54 -7

98 lines not on this page · raw message

meson_options.txt +3 -0
index 8a362fb08d..1d3c94840a 100644
@@ -55,3 +55,6 @@ option('capstone', type: 'combo', value: 'auto',
 option('slirp', type: 'combo', value: 'auto',
        choices: ['disabled', 'enabled', 'auto', 'system', 'internal'],
        description: 'Whether and how to find the slirp library')
+option('fdt', type: 'combo', value: 'auto',
+       choices: ['disabled', 'enabled', 'auto', 'system', 'internal'],
+       description: 'Whether and how to find the libfdt library')
Signature · 1 line
2.26.2
#3 lore raw

Re: [PATCH 2/4] dtc: Convert Makefile bits to meson bits

Quoted 7 lines · Paolo Bonzini

Build the library via the main meson.build just like for capstone. This improves the current state of affairs in that we will re-link the qemu executables against a changed libfdt.a, which we wouldn't do before-hand, and lets us remove the whole recursive make machinery.

The list of targets that require FDT is now obtained from default-configs/ instead of being hardcoded in the configure script.

Could this be a machine Kconfig instead of a target makevar? (Not asking to rewrite this patch, looking if this can be improved later).

Quoted 18 lines
---
 Makefile                                      | 23 +----
 configure                                     | 93 ++++---------------
 default-configs/targets/aarch64-softmmu.mak   |  1 +
 default-configs/targets/arm-softmmu.mak       |  1 +
 .../targets/microblaze-softmmu.mak            |  1 +
 .../targets/microblazeel-softmmu.mak          |  1 +
 default-configs/targets/mips64el-softmmu.mak  |  1 +
 default-configs/targets/ppc-softmmu.mak       |  1 +
 default-configs/targets/ppc64-softmmu.mak     |  1 +
 default-configs/targets/riscv32-softmmu.mak   |  1 +
 default-configs/targets/riscv64-softmmu.mak   |  1 +
 default-configs/targets/rx-softmmu.mak        |  1 +
 meson.build                                   | 61 ++++++++++--
 meson_options.txt                             |  3 +
 14 files changed, 84 insertions(+), 106 deletions(-)
#4 lore raw

Re: [PATCH 2/4] dtc: Convert Makefile bits to meson bits

Quoted 6 lines · Philippe Mathieu-Daudé
Quoted 5 lines · Paolo Bonzini

Build the library via the main meson.build just like for capstone. This improves the current state of affairs in that we will re-link the qemu executables against a changed libfdt.a, which we wouldn't do before-hand, and lets us remove the whole recursive make machinery.

Quoted 6 lines
Quoted 2 lines

The list of targets that require FDT is now obtained from default-configs/ instead of being hardcoded in the configure script.

Could this be a machine Kconfig instead of a target makevar? (Not asking to rewrite this patch, looking if this can be improved later).

Yes, I think that's a very good idea. I'm not sure which machines need it, but they would simply "select FDT" and meson.build can look at config_devices to list emulators that require libfdt.

Paolo

#5 lore raw

PATCH 3/4 configure: do not clobber environment CFLAGS/CXXFLAGS/LDFLAGS

In reply to Paolo Bonzini

If the CFLAGS, CXXFLAGS or LDFLAGS variables are present in the environment, any modification made within the configure script is passed down to Meson. This is particularly undesirable for the "-pie" option, since it overrides "-shared" and thus messes up the linker flags for shared modules.

Using a separate variable therefore fixes the bug, while clarifying that the scope of these CFLAGS is just the configure script.

We also do not need to pass those variables in config-host.mak; they were only used for printing the summary now that all submodules are built with handwritten Meson rules). For now synthesize CFLAGS in the configuration summary, the next patch will also pass them in a cleaner way using the cross file.

Reported-by Frederic Bezies
Analyzed-by Toolybird

Message-Id: <[email protected]>

---
 configure   | 38 +++++++++++++++++---------------------
 meson.build |  3 ++-
 2 files changed, 19 insertions(+), 22 deletions(-)
configure +17 -21
index 2fdb4339e8..1b173276ea 100755
@@ -155,7 +155,7 @@ update_cxxflags() {
     # options which some versions of GCC's C++ compiler complain about
     # because they only make sense for C programs.
     QEMU_CXXFLAGS="$QEMU_CXXFLAGS -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS"
-    CXXFLAGS=$(echo "$CFLAGS" | sed s/-std=gnu99/-std=gnu++11/)
+    CONFIGURE_CXXFLAGS=$(echo "$CONFIGURE_CFLAGS" | sed s/-std=gnu99/-std=gnu++11/)
     for arg in $QEMU_CFLAGS; do
         case $arg in
             -Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\
@@ -170,13 +170,14 @@ update_cxxflags() {
 
 compile_object() {
   local_cflags="$1"
-  do_cc $CFLAGS $QEMU_CFLAGS $local_cflags -c -o $TMPO $TMPC
+  do_cc $CFLAGS $CONFIGURE_CFLAGS $QEMU_CFLAGS $local_cflags -c -o $TMPO $TMPC
 }
 
 compile_prog() {
   local_cflags="$1"
   local_ldflags="$2"
-  do_cc $CFLAGS $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $QEMU_LDFLAGS $local_ldflags
+  do_cc $CFLAGS $CONFIGURE_CFLAGS $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC \
+      $LDFLAGS $CONFIGURE_LDFLAGS $QEMU_LDFLAGS $local_ldflags
 }
 
 # symbolically link $1 to $2.  Portable version of "ln -sf".
@@ -537,7 +538,10 @@ QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
 QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
 QEMU_INCLUDES="-iquote . -iquote ${source_path} -iquote ${source_path}/accel/tcg -iquote ${source_path}/include"
 QEMU_INCLUDES="$QEMU_INCLUDES -iquote ${source_path}/disas/libvixl"
-CFLAGS="-std=gnu99 -Wall"
+
+# Flags that are needed during configure but later taken care of by Meson
+CONFIGURE_CFLAGS="-std=gnu99 -Wall"
+CONFIGURE_LDFLAGS=
 
 
 check_define() {
@@ -851,7 +855,7 @@ if test "$mingw32" = "yes" ; then
   EXESUF=".exe"
   HOST_DSOSUF=".dll"
   # MinGW needs -mthreads for TLS and macro _MT.
-  CFLAGS="-mthreads $CFLAGS"
+  CONFIGURE_CFLAGS="-mthreads $CONFIGURE_CFLAGS"
   write_c_skeleton;
   prefix="/qemu"
   qemu_suffix=""
@@ -2109,7 +2113,7 @@ fi
 
 if test "$static" = "yes"; then
   if test "$pie" != "no" && compile_prog "-Werror -fPIE -DPIE" "-static-pie"; then
-    CFLAGS="-fPIE -DPIE $CFLAGS"
+    CONFIGURE_CFLAGS="-fPIE -DPIE $CONFIGURE_CFLAGS"
     QEMU_LDFLAGS="-static-pie $QEMU_LDFLAGS"
     pie="yes"
   elif test "$pie" = "yes"; then
@@ -2119,11 +2123,11 @@ if test "$static" = "yes"; then
     pie="no"
   fi
 elif test "$pie" = "no"; then
-  CFLAGS="$CFLAGS_NOPIE $CFLAGS"
-  LDFLAGS="$LDFLAGS_NOPIE $LDFLAGS"
+  CONFIGURE_CFLAGS="$CFLAGS_NOPIE $CONFIGURE_CFLAGS"
+  CONFIGURE_LDFLAGS="$LDFLAGS_NOPIE $CONFIGURE_LDFLAGS"
 elif compile_prog "-Werror -fPIE -DPIE" "-pie"; then
-  CFLAGS="-fPIE -DPIE $CFLAGS"
-  LDFLAGS="-pie $LDFLAGS"
+  CONFIGURE_CFLAGS="-fPIE -DPIE $CONFIGURE_CFLAGS"
+  CONFIGURE_LDFLAGS="-pie $CONFIGURE_LDFLAGS"
   pie="yes"
 elif test "$pie" = "yes"; then
   error_exit "PIE not available due to missing toolchain support"
@@ -3667,7 +3671,7 @@ EOF
 if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then
     if cc_has_warning_flag "-Wno-unknown-attributes"; then
         glib_cflags="-Wno-unknown-attributes $glib_cflags"
-        CFLAGS="-Wno-unknown-attributes $CFLAGS"
+        CONFIGURE_CFLAGS="-Wno-unknown-attributes $CONFIGURE_CFLAGS"
     fi
 fi
 
@@ -3687,7 +3691,7 @@ EOF
 if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then
     if cc_has_warning_flag "-Wno-unused-function"; then
         glib_cflags="$glib_cflags -Wno-unused-function"
-        CFLAGS="$CFLAGS -Wno-unused-function"
+        CONFIGURE_CFLAGS="$CONFIGURE_CFLAGS -Wno-unused-function"
     fi
 fi
 
@@ -5814,13 +5818,6 @@ elif test "$fortify_source" = "yes" ; then
   QEMU_CFLAGS="-U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $QEMU_CFLAGS"
   debug=no
 fi
-if test "$debug_info" = "yes"; then
-  CFLAGS="-g $CFLAGS"
-  LDFLAGS="-g $LDFLAGS"
-fi
-if test "$debug" = "no"; then
-  CFLAGS="-O2 $CFLAGS"
-fi
 
 case "$ARCH" in
 alpha)
@@ -6043,7 +6040,7 @@ EOF
 
     update_cxxflags
 
-    if do_cxx $CXXFLAGS $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $QEMU_LDFLAGS; then
+    if do_cxx $CXXFLAGS $CONFIGURE_CXXFLAGS $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $QEMU_LDFLAGS; then
         # C++ compiler $cxx works ok with C compiler $cc
         :
     else
@@ -6953,7 +6950,6 @@ echo "RANLIB=$ranlib" >> $config_host_mak
 echo "NM=$nm" >> $config_host_mak
 echo "PKG_CONFIG=$pkg_config_exe" >> $config_host_mak
 echo "WINDRES=$windres" >> $config_host_mak
-echo "CFLAGS=$CFLAGS" >> $config_host_mak
 echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
 echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
 echo "QEMU_CXXFLAGS=$QEMU_CXXFLAGS" >> $config_host_mak
meson.build +2 -1
index 426b73d31f..d9377f371d 100644
@@ -1758,7 +1758,8 @@ if targetos == 'darwin'
   summary_info += {'Objective-C compiler': meson.get_compiler('objc').cmd_array()[0]}
 endif
 summary_info += {'ARFLAGS':           config_host['ARFLAGS']}
-summary_info += {'CFLAGS':            config_host['CFLAGS']}
+summary_info += {'CFLAGS':            '-O' + get_option('optimization')
+                                           + (get_option('debug') ? ' -g' : '')}
 summary_info += {'QEMU_CFLAGS':       config_host['QEMU_CFLAGS']}
 summary_info += {'QEMU_LDFLAGS':      config_host['QEMU_LDFLAGS']}
 summary_info += {'make':              config_host['MAKE']}
Signature · 1 line
2.26.2
#6 lore raw

PATCH 4/4 configure: consistently pass CFLAGS/CXXFLAGS/LDFLAGS to meson

In reply to Paolo Bonzini

Environment variables like CFLAGS are easy to accidentally change. Meson warns if that happens, but in a project with a lot of configuration that is easy to lose. It is also surprising behavior since meson caches -D options and remembers those on reconfiguration (which we rely on, since configure options become -D options).

By placing the user-provided CFLAGS, CXXFLAGS and LDFLAGS in the cross file, we at least get consistent behavior. These environment variables are still ugly and not really recommended, but there are distros that rely on them. For the gory details, refer to
https://github.com/mesonbuild/meson/issues/4664.

Message-Id: <[email protected]>

---
 configure   | 25 +++++++++++++++----------
 meson.build | 14 ++++++++++++--
 2 files changed, 27 insertions(+), 12 deletions(-)
configure +15 -10
index 1b173276ea..04c8cc017c 100755
@@ -7130,24 +7130,29 @@ echo "export PYTHON='$python'" >> "$iotests_common_env"
 if test "$skip_meson" = no; then
 cross="config-meson.cross.new"
 meson_quote() {
-    echo "['$(echo $* | sed "s/ /','/g")']"
+    echo "'$(echo $* | sed "s/ /','/g")'"
 }
 
 echo "# Automatically generated by configure - do not modify" > $cross
 echo "[properties]" >> $cross
 test -z "$cxx" && echo "link_language = 'c'" >> $cross
+echo "[built-in options]" >> $cross
+echo "c_args = [${CFLAGS:+$(meson_quote $CFLAGS)}]" >> $cross
+echo "cpp_args = [${CXXFLAGS:+$(meson_quote $CXXFLAGS)}]" >> $cross
+echo "c_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross
+echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross
 echo "[binaries]" >> $cross
-echo "c = $(meson_quote $cc)" >> $cross
-test -n "$cxx" && echo "cpp = $(meson_quote $cxx)" >> $cross
-echo "ar = $(meson_quote $ar)" >> $cross
-echo "nm = $(meson_quote $nm)" >> $cross
-echo "pkgconfig = $(meson_quote $pkg_config_exe)" >> $cross
-echo "ranlib = $(meson_quote $ranlib)" >> $cross
+echo "c = [$(meson_quote $cc)]" >> $cross
+test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross
+echo "ar = [$(meson_quote $ar)]" >> $cross
+echo "nm = [$(meson_quote $nm)]" >> $cross
+echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross
+echo "ranlib = [$(meson_quote $ranlib)]" >> $cross
 if has $sdl2_config; then
-  echo "sdl2-config = $(meson_quote $sdl2_config)" >> $cross
+  echo "sdl2-config = [$(meson_quote $sdl2_config)]" >> $cross
 fi
-echo "strip = $(meson_quote $strip)" >> $cross
-echo "windres = $(meson_quote $windres)" >> $cross
+echo "strip = [$(meson_quote $strip)]" >> $cross
+echo "windres = [$(meson_quote $windres)]" >> $cross
 if test -n "$cross_prefix"; then
     cross_arg="--cross-file config-meson.cross"
     echo "[host_machine]" >> $cross
meson.build +12 -2
index d9377f371d..e9122d2b90 100644
@@ -1758,8 +1758,18 @@ if targetos == 'darwin'
   summary_info += {'Objective-C compiler': meson.get_compiler('objc').cmd_array()[0]}
 endif
 summary_info += {'ARFLAGS':           config_host['ARFLAGS']}
-summary_info += {'CFLAGS':            '-O' + get_option('optimization')
-                                           + (get_option('debug') ? ' -g' : '')}
+summary_info += {'CFLAGS':            ' '.join(get_option('c_args')
+                                               + ['-O' + get_option('optimization')]
+                                               + (get_option('debug') ? ['-g'] : []))}
+if link_language == 'cpp'
+  summary_info += {'CXXFLAGS':        ' '.join(get_option('cpp_args')
+                                               + ['-O' + get_option('optimization')]
+                                               + (get_option('debug') ? ['-g'] : []))}
+endif
+link_args = get_option(link_language + '_link_args')
+if link_args.length() > 0
+  summary_info += {'LDFLAGS':         ' '.join(link_args)}
+endif
 summary_info += {'QEMU_CFLAGS':       config_host['QEMU_CFLAGS']}
 summary_info += {'QEMU_LDFLAGS':      config_host['QEMU_LDFLAGS']}
 summary_info += {'make':              config_host['MAKE']}
Signature · 1 line
2.26.2
Tested-by Reviewed-by on the v1 series
#7 lore raw
In reply to Paolo Bonzini
Quoted 16 lines · Paolo Bonzini

The main purpose of this series is to have a correct and consistent handling of CFLAGS/CXXFLAGS/LDFLAGS environment variables:

- correct: avoid that the -pie flag, used for the compiler checks in the configure script, ends up being passed to Meson if an LDFLAGS environment variable exists (patch 3)

- consistent: ensure that CFLAGS that are set in the configure script are persistent even if Meson is restarted; to do so, make the configure script store them in the cross file it generates.

In order to avoid having to deal with recursive make, patches 1 and 2 integrate the Meson-based build system with the build of embedded slirp and libfdt. This follows the lead of Richard's patches to do the same with Capstone.

Quoted 8 lines

Based-on: <[email protected]>
Supersedes: <[email protected]>

Paolo Bonzini (4):
slirp: Convert Makefile bits to meson bits
dtc: Convert Makefile bits to meson bits
configure: do not clobber environment CFLAGS/CXXFLAGS/LDFLAGS
configure: consistently pass CFLAGS/CXXFLAGS/LDFLAGS to meson

r~