Skip to contentSkip to conversation

DP83TD510 Single Pair 10Mbps Ethernet PHY

PATCH New Dan Murphy 1 participant 1 message Oct 8, 2020

Subsystems (2)
lore
Share & tools
lore

Dan Murphy

author
#0 lore raw

cover DP83TD510 Single Pair 10Mbps Ethernet PHY

Hello

The DP83TD510 is an Ethernet PHY supporting single pair of twisted wires. The PHY is capable of 10Mbps communication over long distances and exceeds the IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification. The PHY supports various voltage level signalling and can be forced to support a specific voltage or allowed to perfrom auto negotiation on the voltage level. The default for the PHY is auto negotiation but if the PHY is forced to a specific voltage then the LP must also support the same voltage.

Dan

Dan Murphy (2):
dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY
net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY

 .../devicetree/bindings/net/ti,dp83td510.yaml |  70 +++
 drivers/net/phy/Kconfig                       |   6 +
 drivers/net/phy/Makefile                      |   1 +
 drivers/net/phy/dp83td510.c                   | 583 ++++++++++++++++++
 4 files changed, 660 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
 create mode 100644 drivers/net/phy/dp83td510.c
Signature · 1 line
2.28.0.585.ge1cfff676549