Skip to content

DP83TD510 Single Pair 10Mbps Ethernet PHY

Dan Murphy lkml netdev 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH net-next 0/2] DP83TD510 Single Pair 10Mbps Ethernet PHY

Hello

The DP83TD510 is an Ethernet PHY supporting single pair of twisted wires. The PHY is capable of 10Mbps communication over long distances and exceeds the IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification. The PHY supports various voltage level signalling and can be forced to support a specific voltage or allowed to perfrom auto negotiation on the voltage level. The default for the PHY is auto negotiation but if the PHY is forced to a specific voltage then the LP must also support the same voltage.

Dan

Dan Murphy (2):
dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY
net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY

 .../devicetree/bindings/net/ti,dp83td510.yaml |  70 +++
 drivers/net/phy/Kconfig                       |   6 +
 drivers/net/phy/Makefile                      |   1 +
 drivers/net/phy/dp83td510.c                   | 583 ++++++++++++++++++
 4 files changed, 660 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
 create mode 100644 drivers/net/phy/dp83td510.c
Signature · 1 line
2.28.0.585.ge1cfff676549