riscv: Add semihosting support [v10]
Subsystems (2)
cover riscv: Add semihosting support [v10]
This series first adapts the existing ARM semihosting code to be architecture-neutral, then adds RISC-V semihosting support using that.
Patch 1/4 moves the ARM semihosting support code to common directories and adapts the build system to match.
Patch 2/4 changes the public API to this code to use architecture-independent names and types.
Patch 3/4 changes the internals of this code to use architecture neutral types where practical, and adds helper functions to abstract away the architecture-specific details.
Patch 4/4 adds the RISC-V support, including modifying the breakpoint handling code to recognize a semihosting sequence and adding RISC-V specific implementations of the helper functions.
PATCH 1/4 semihosting: Move ARM semihosting code to shared directories
This commit renames two files which provide ARM semihosting support so that they can be shared by other architectures:
1. target/arm/arm-semi.c -> hw/semihosting/common-semi.c
2. linux-user/arm/semihost.c -> linux-user/semihost.c
The build system was modified to reflect this change, but the contents of the two files are unchanged.
---
target/arm/arm-semi.c => hw/semihosting/common-semi.c | 0
hw/semihosting/meson.build | 2 ++
linux-user/arm/meson.build | 3 ---
linux-user/meson.build | 2 ++
linux-user/{arm => }/semihost.c | 0
target/arm/meson.build | 2 --
6 files changed, 4 insertions(+), 5 deletions(-)
rename target/arm/arm-semi.c => hw/semihosting/common-semi.c (100%)
rename linux-user/{arm => }/semihost.c (100%)hw/semihosting/common-semi.c renamed from target/arm/arm-semi.c +0 -0
hw/semihosting/meson.build +2 -0
@@ -2,3 +2,5 @@ specific_ss.add(when: 'CONFIG_SEMIHOSTING', if_true: files( 'config.c', 'console.c', )) + +specific_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c'))
linux-user/arm/meson.build +0 -3
@@ -1,6 +1,3 @@ -linux_user_ss.add(when: 'TARGET_AARCH64', if_true: files('semihost.c')) -linux_user_ss.add(when: 'TARGET_ARM', if_true: files('semihost.c')) - subdir('nwfpe') syscall_nr_generators += {
linux-user/meson.build +2 -0
@@ -17,6 +17,8 @@ linux_user_ss.add(rt) linux_user_ss.add(when: 'TARGET_HAS_BFLT', if_true: files('flatload.c')) linux_user_ss.add(when: 'TARGET_I386', if_true: files('vm86.c')) +linux_user_ss.add(when: 'TARGET_AARCH64', if_true: files('semihost.c')) +linux_user_ss.add(when: 'TARGET_ARM', if_true: files('semihost.c')) syscall_nr_generators = {}
linux-user/semihost.c renamed from linux-user/arm/semihost.c +0 -0
target/arm/meson.build +0 -2
@@ -32,8 +32,6 @@ arm_ss.add(files( )) arm_ss.add(zlib) -arm_ss.add(when: 'CONFIG_TCG', if_true: files('arm-semi.c')) - arm_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c', 'kvm64.c'), if_false: files('kvm-stub.c')) arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
Signature · 1 line
2.28.0
Re: [PATCH 1/4] semihosting: Move ARM semihosting code to shared directories
Quoted 11 lines · Keith Packard via
This commit renames two files which provide ARM semihosting support so that they can be shared by other architectures:
1.
target/arm/arm-semi.c->hw/semihosting/common-semi.c
2.linux-user/arm/semihost.c->linux-user/semihost.cThe build system was modified to reflect this change, but the contents of the two files are unchanged.
Signed-off-by Keith Packard <[email protected]>
Alistair
Quoted 70 lines
--- target/arm/arm-semi.c => hw/semihosting/common-semi.c | 0 hw/semihosting/meson.build | 2 ++ linux-user/arm/meson.build | 3 --- linux-user/meson.build | 2 ++ linux-user/{arm => }/semihost.c | 0 target/arm/meson.build | 2 -- 6 files changed, 4 insertions(+), 5 deletions(-) rename target/arm/arm-semi.c => hw/semihosting/common-semi.c (100%) rename linux-user/{arm => }/semihost.c (100%)hw/semihosting/common-semi.c renamed from target/arm/arm-semi.c +0
-0hw/semihosting/meson.build +2
-0@@ -2,3 +2,5 @@ specific_ss.add(when: 'CONFIG_SEMIHOSTING', if_true: files( 'config.c', 'console.c', )) + +specific_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c'))linux-user/arm/meson.build +0
-3@@ -1,6 +1,3 @@ -linux_user_ss.add(when: 'TARGET_AARCH64', if_true: files('semihost.c')) -linux_user_ss.add(when: 'TARGET_ARM', if_true: files('semihost.c')) - subdir('nwfpe') syscall_nr_generators += {linux-user/meson.build +2
-0@@ -17,6 +17,8 @@ linux_user_ss.add(rt) linux_user_ss.add(when: 'TARGET_HAS_BFLT', if_true: files('flatload.c')) linux_user_ss.add(when: 'TARGET_I386', if_true: files('vm86.c')) +linux_user_ss.add(when: 'TARGET_AARCH64', if_true: files('semihost.c')) +linux_user_ss.add(when: 'TARGET_ARM', if_true: files('semihost.c')) syscall_nr_generators = {}linux-user/semihost.c renamed from linux-user/arm/semihost.c +0
-0target/arm/meson.build +0
-3@@ -32,8 +32,6 @@ arm_ss.add(files( )) arm_ss.add(zlib) -arm_ss.add(when: 'CONFIG_TCG', if_true: files('arm-semi.c')) - arm_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c', 'kvm64.c'), if_false: files('kvm-stub.c')) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( --2.28.0
Re: [PATCH 1/4] semihosting: Move ARM semihosting code to shared directories
In reply to Keith PackardQuoted 21 lines · Keith Packard
This commit renames two files which provide ARM semihosting support so that they can be shared by other architectures:
1.
target/arm/arm-semi.c->hw/semihosting/common-semi.c
2.linux-user/arm/semihost.c->linux-user/semihost.cThe build system was modified to reflect this change, but the contents of the two files are unchanged.
Signed-off-by Keith Packard <[email protected]>---
hw/semihosting/common-semi.c renamed from target/arm/arm-semi.c +0
-0hw/semihosting/meson.build +0
-0
hw/semihosting/meson.build specific_ss.add(when: 'CONFIG_SEMIHOSTING', if_true: files( · line 6
Quoted 5 lines
hw/semihosting/meson.build +2
-0@@ -2,3 +2,5 @@ specific_ss.add(when: 'CONFIG_SEMIHOSTING', if_true: files( 'config.c', 'console.c', )) + +specific_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c'))
I think this adds this file to the compilation for all TCG targets; you only want it for targets which have Arm-semihosting-ABI compatible semihosting. (Various other targets either don't have semihosting or have their own ABI.)
thanks
-- PMM
Re: [PATCH 1/4] semihosting: Move ARM semihosting code to shared directories
Quoted 6 lines · Peter Maydell
Quoted 1 line
+specific_ss.add(when: '
CONFIG_TCG',if_true: files ('common-semi.c'))I think this adds this file to the compilation for all TCG targets; you only want it for targets which have Arm-semihosting-ABI compatible semihosting. (Various other targets either don't have semihosting or have their own ABI.)
Right. These should have been target-specific source sets so that the file was only added to those targets:
arm_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c'))
riscv_ss.add(files('common-semi.c'))This appears to work in my testing (building arm, risc-v and x86_64 configs).
Signature · 1 line
-keith
Re: [PATCH 1/4] semihosting: Move ARM semihosting code to shared directories
Quoted 10 lines · Keith Packard
Quoted 6 lines · Peter Maydell
Quoted 1 line
+specific_ss.add(when: '
CONFIG_TCG',if_true: files ('common-semi.c'))I think this adds this file to the compilation for all TCG targets; you only want it for targets which have Arm-semihosting-ABI compatible semihosting. (Various other targets either don't have semihosting or have their own ABI.)
Quoted 8 lines
Right. These should have been target-specific source sets so that the file was only added to those targets:
arm_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c')) riscv_ss.add(files('common-semi.c'))This appears to work in my testing (building arm, risc-v and
x86_64configs).
I'm not a kconfig expert but it might be preferable to have a new CONFIG_ for arm-semihosting-ABI which the relevant targets enable. Somebody else may be able to advise.
thanks
-- PMM
Re: [PATCH 1/4] semihosting: Move ARM semihosting code to shared directories
Quoted 9 lines · Peter Maydell
Quoted 5 lines
arm_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c')) riscv_ss.add(files('common-semi.c'))This appears to work in my testing (building arm, risc-v and
x86_64configs).I'm not a kconfig expert but it might be preferable to have a new
CONFIG_for arm-semihosting-ABI which the relevant targets enable. Somebody else may be able to advise.
The change above makes this do exactly what the old code did -- add this file to the arm_ss sourceset whenever CONFIG_TCG is true. arm_ss is only used to build ARM targets, so this file gets added only for those targets. Here's what the patch to target/arm/meson.build and hw/semihosting/meson.build looks like now.
target/arm/meson.build +0 -2
@@ -32,8 +32,6 @@ arm_ss.add(files( )) arm_ss.add(zlib) -arm_ss.add(when: 'CONFIG_TCG', if_true: files('arm-semi.c')) - arm_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c', 'kvm64.c'), if_false: files('kvm-stub.c')) arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
hw/semihosting/meson.build +2 -0
@@ -2,3 +2,5 @@ specific_ss.add(when: 'CONFIG_SEMIHOSTING', if_true: files( 'config.c', 'console.c', )) + +arm_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c'))
Signature · 1 line
-keith
Re: [PATCH 1/4] semihosting: Move ARM semihosting code to shared directories
Quoted 37 lines · Keith Packard
Quoted 9 lines · Peter Maydell
Quoted 5 lines
arm_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c')) riscv_ss.add(files('common-semi.c'))This appears to work in my testing (building arm, risc-v and
x86_64configs).I'm not a kconfig expert but it might be preferable to have a new
CONFIG_for arm-semihosting-ABI which the relevant targets enable. Somebody else may be able to advise.The change above makes this do exactly what the old code did -- add this file to the
arm_sssourceset wheneverCONFIG_TCGis true.arm_ssis only used to build ARM targets, so this file gets added only for those targets. Here's what the patch to target/arm/meson.build and hw/semihosting/meson.build looks like now.target/arm/meson.build +0
-2@@ -32,8 +32,6 @@ arm_ss.add(files( )) arm_ss.add(zlib) -arm_ss.add(when: 'CONFIG_TCG', if_true: files('arm-semi.c')) - arm_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c', 'kvm64.c'), if_false: files('kvm-stub.c')) arm_ss.add(when: 'TARGET_AARCH64', if_true: files(hw/semihosting/meson.build +0
-0
hw/semihosting/meson.build specific_ss.add(when: 'CONFIG_SEMIHOSTING', if_true: files( · line 6
Quoted 5 lines
hw/semihosting/meson.build +2
-0@@ -2,3 +2,5 @@ specific_ss.add(when: 'CONFIG_SEMIHOSTING', if_true: files( 'config.c', 'console.c', )) + +arm_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c'))
I don't think we want arm specific adds in the common code. I think what Peter was suggesting is a new config symbol that only ARM and RISC define, e.g something like:
specific_ss.add(when: 'CONFIG_ARM_STYLE_SEMIHOSTING',
if_true: files ('common-semi.c'))or some other suitably descriptive symbol. Otherwise you have to keep adding an foo_ss.add line for each architecture that wants it.
Signature · 1 line
Alex Bennée
Re: [PATCH 1/4] semihosting: Move ARM semihosting code to shared directories
Quoted 9 lines · Alex Bennée
I don't think we want arm specific adds in the common code. I think what Peter was suggesting is a new config symbol that only ARM and RISC define, e.g something like:
specific_ss.add(when: '
CONFIG_ARM_STYLE_SEMIHOSTING',if_true: files ('common-semi.c'))or some other suitably descriptive symbol. Otherwise you have to keep adding an foo_ss.add line for each architecture that wants it.
Sure, that will also work, just a few lines of additional config file stuff.
Signature · 1 line
-keith
Re: [PATCH 1/4] semihosting: Move ARM semihosting code to shared directories
In reply to Alex BennéeQuoted 2 lines · Alex Bennée
specific_ss.add(when: '
CONFIG_ARM_STYLE_SEMIHOSTING',if_true: files ('common-semi.c'))
I've sent another version of the series using this plan. It does look a bit nicer as the only changes required when adding support to another target is to place this option in the config file.
Thanks for the suggestion, and thanks for helping review this patch!
Signature · 1 line
-keith
PATCH 2/4 semihosting: Change common-semi API to be architecture-independent
In reply to Keith PackardThe public API is now defined in hw/semihosting/common-semi.h. do_common_semihosting takes CPUState * instead of CPUARMState *. All internal functions have been renamed common_semi_ instead of arm_semi_ or arm_. Aside from the API change, there are no functional changes in this patch.
--- hw/semihosting/common-semi.c | 16 ++++++++++------ hw/semihosting/common-semi.h | 36 +++++++++++++++++++++++++++++++++++ linux-user/aarch64/cpu_loop.c | 3 ++- linux-user/arm/cpu_loop.c | 3 ++- target/arm/cpu.h | 8 -------- target/arm/helper.c | 5 +++-- target/arm/m_helper.c | 7 ++++++- 7 files changed, 59 insertions(+), 19 deletions(-) create mode 100644 hw/semihosting/common-semi.h
hw/semihosting/common-semi.c +10 -6
@@ -1,10 +1,14 @@/* -* Arm "Angel" semihosting syscalls +* Semihosting support for systems modeled on the Arm "Angel" +* semihosting syscalls design. * * Copyright (c) 2005, 2007 CodeSourcery. * Copyright (c) 2019 Linaro * Written by Paul Brook. * +* Copyright © 2020 by Keith Packard <[email protected]> +* Adapted for systems other than ARM, including RISC-V, by Keith Packard +* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or
@@ -371,12 +375,12 @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb,* do anything with its return value, because it is not necessarily * the result of the syscall, but could just be the old value of X0. * The only thing safe to do with this is that the callers of -* do_arm_semihosting() will write it straight back into X0. +* do_common_semihosting() will write it straight back into X0. * (In linux-user mode, the callback will have happened before * gdb_do_syscallv() returns.) * * We should tidy this up so neither this function nor -* do_arm_semihosting() return a value, so the mistake of +* do_common_semihosting() return a value, so the mistake of * doing something with the return value is not possible to make. */
@@ -673,10 +677,10 @@ static const GuestFDFunctions guestfd_fns[] = {* leave the register unchanged. We use 0xdeadbeef as the return value * when there isn't a defined return value for the call. */ -target_ulong do_arm_semihosting (CPUARMState *env) +target_ulong do_common_semihosting (CPUState *cs) { -ARMCPU *cpu =env_archcpu (env); -CPUState *cs =env_cpu (env); +ARMCPU *cpu =ARM_CPU (cs); +CPUARMState *env = &cpu->env;target_ulong args;target_ulong arg0, arg1, arg2, arg3;char * s;
hw/semihosting/common-semi.h new file +36 -0
@@ -0,0 +1,36 @@ +/* +* Semihosting support for systems modeled on the Arm "Angel" +* semihosting syscalls design. +* +* Copyright (c) 2005, 2007 CodeSourcery. +* Copyright (c) 2019 Linaro +* Written by Paul Brook. +* +* Copyright © 2020 by Keith Packard <[email protected]> +* Adapted for systems other than ARM, including RISC-V, by Keith Packard +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, see <http://www.gnu.org/licenses/>. +* +* ARM Semihosting is documented in: +* Semihosting for AArch32 and AArch64 Release 2.0 +* https://static.docs.arm.com/100863/0200/semihosting.pdf +* +*/ + +#ifndef COMMON_SEMI_H +#define COMMON_SEMI_H + +target_ulong do_common_semihosting (CPUState *cs); + +#endif /* COMMON_SEMI_H */
linux-user/aarch64/cpu_loop.c +2 -1
@@ -22,6 +22,7 @@#include "qemu.h" #include "cpu_loop-common.h" #include "qemu/guest-random.h" +#include "hw/semihosting/common-semi.h" #define get_user_code_u32 (x, gaddr, env) \ ({ abi_long __r = get_user_u32((x), (gaddr)); \
@@ -129,7 +130,7 @@ void cpu_loop(CPUARMState *env)queue_signal (env, info.si_signo,QEMU_SI_FAULT , &info);break ;case EXCP_SEMIHOST : - env->xregs[0 ] =do_arm_semihosting (env); + env->xregs[0 ] =do_common_semihosting (cs); env->pc +=4 ;break ;case EXCP_YIELD :
linux-user/arm/cpu_loop.c +2 -1
@@ -22,6 +22,7 @@#include "qemu.h" #include "elf.h" #include "cpu_loop-common.h" +#include "hw/semihosting/common-semi.h" #define get_user_code_u32 (x, gaddr, env) \ ({ abi_long __r = get_user_u32((x), (gaddr)); \
@@ -393,7 +394,7 @@ void cpu_loop(CPUARMState *env) }break ;case EXCP_SEMIHOST : - env->regs[0 ] =do_arm_semihosting (env); + env->regs[0 ] =do_common_semihosting (cs); env->regs[15 ] += env->thumb ?2 :4 ;break ;case EXCP_INTERRUPT :
target/arm/cpu.h +0 -8
@@ -1068,14 +1068,6 @@ static inline void aarch64_sve_change_el(CPUARMState *env, int o,static inline void aarch64_add_sve_properties (Object *obj) { }#endif -#if !defined(CONFIG_TCG ) -static inline target_ulong do_arm_semihosting (CPUARMState *env) -{ -g_assert_not_reached (); -} -#else -target_ulong do_arm_semihosting (CPUARMState *env); -#endif void aarch64_sync_32_to_64 (CPUARMState *env);void aarch64_sync_64_to_32 (CPUARMState *env);
target/arm/helper.c +3 -2
@@ -34,6 +34,7 @@#ifdef CONFIG_TCG #include "arm_ldst.h" #include "exec/cpu_ldst.h" +#include "hw/semihosting/common-semi.h" #endif #define ARM_CPU_FREQ 1000000000/* FIXME: 1 GHz, should be configurable */
@@ -9889,13 +9890,13 @@ static void handle_semihosting(CPUState *cs)qemu_log_mask (CPU_LOG_INT ,"...handling as semihosting call 0x%" PRIx64"\n" , env->xregs[0 ]); - env->xregs[0 ] =do_arm_semihosting (env); + env->xregs[0 ] =do_common_semihosting (cs); env->pc +=4 ; }else {qemu_log_mask (CPU_LOG_INT ,"...handling as semihosting call 0x%x\n" , env->regs[0 ]); - env->regs[0 ] =do_arm_semihosting (env); + env->regs[0 ] =do_common_semihosting (cs); env->regs[15 ] += env->thumb ?2 :4 ; } }
target/arm/m_helper.c +6 -1
@@ -31,6 +31,7 @@#ifdef CONFIG_TCG #include "arm_ldst.h" #include "exec/cpu_ldst.h" +#include "hw/semihosting/common-semi.h" #endif static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask,
@@ -2188,7 +2189,11 @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)qemu_log_mask (CPU_LOG_INT ,"...handling as semihosting call 0x%x\n" , env->regs[0 ]); - env->regs[0 ] =do_arm_semihosting (env); +#ifdef CONFIG_TCG + env->regs[0 ] =do_common_semihosting (cs); +#else +g_assert_not_reached (); +#endif env->regs[15 ] += env->thumb ?2 :4 ;return ;case EXCP_BKPT :
Signature · 1 line
2.28.0
PATCH 3/4 semihosting: Change internal common-semi interfaces to use CPUState *
In reply to Keith PackardThis makes all of the internal interfaces architecture-independent and renames the internal functions to use the 'common_semi' prefix instead of 'arm' or 'arm_semi'.
To do this, some new architecture-specific internal helper functions were created:
static inline target_ulong
common_semi_arg(CPUState *cs, int argno)
Returns the argno'th semihosting argument, where argno can be either 0 or 1.
static inline void common_semi_set_ret(CPUState *cs, target_ulong ret)
Sets the semihosting return value.
static inline bool common_semi_sys_exit_extended(CPUState *cs, int nr)
This detects whether the specified semihosting call, which is either TARGET_SYS_EXIT or TARGET_SYS_EXIT_EXTENDED should be executed using the TARGET_SYS_EXIT_EXTENDED semantics.
In addition, several existing functions have been changed to flag areas of code which are architecture specific:
static target_ulong
common_semi_flen_buf(CPUState *cs)
Returns the current stack pointer minus 64, which is where a stat structure will be placed on the stack
#define GET_ARG(n)
This fetches arguments from the semihosting command's argument block. The address of this is available implicitly through the local 'args' variable. This is *mostly* architecture independent, but does depend on the current ABI's notion of the size of a 'long' parameter, which may need run-time checks (as it does on AARCH64)
#define SET_ARG(n, val)
This mirrors GET_ARG and stores data back into the argument block.
--- hw/semihosting/common-semi.c | 326 ++++++++++++++++++----------------- 1 file changed, 164 insertions(+), 162 deletions(-)
hw/semihosting/common-semi.c +164 -162
@@ -32,11 +32,12 @@#include "cpu.h" #include "hw/semihosting/semihost.h" #include "hw/semihosting/console.h" +#include "hw/semihosting/common-semi.h" #include "qemu/log.h" #ifdef CONFIG_USER_ONLY #include "qemu.h" -#define ARM_ANGEL_HEAP_SIZE (128 * 1024 * 1024) +#define COMMON_SEMI_HEAP_SIZE (128 * 1024 * 1024)#else #include "exec/gdbstub.h" #include "qemu/cutils.h"
@@ -132,6 +133,36 @@ typedef struct GuestFD {static GArray *guestfd_array; +#ifdef TARGET_ARM +static inline target_ulong +common_semi_arg (CPUState *cs,int argno) +{ +ARMCPU *cpu =ARM_CPU (cs); +CPUARMState *env = &cpu->env; +if (is_a64 (env)) +return env->xregs[argno]; +else +return env->regs[argno]; +} + +static inline void +common_semi_set_ret (CPUState *cs,target_ulong ret) +{ +ARMCPU *cpu =ARM_CPU (cs); +CPUARMState *env = &cpu->env; +if (is_a64 (env)) + env->xregs[0 ] = ret; +else + env->regs[0 ] = ret; +} + +static inline bool +common_semi_sys_exit_extended (CPUState *cs,int nr) +{ +return (nr ==TARGET_SYS_EXIT_EXTENDED ||is_a64 (cs->env_ptr)); +} +#endif /* TARGET_ARM */ +/* * Allocate a new guest file descriptor and return it; if we * couldn't allocate a new fd then return -1.
@@ -237,11 +268,10 @@ static target_ulong syscall_err;#include "exec/softmmu-semi.h" #endif -static inline uint32_t set_swi_errno (CPUARMState *env,uint32_t code) +static inline uint32_t set_swi_errno (CPUState *cs,uint32_t code) {if (code == (uint32_t )-1 ) {#ifdef CONFIG_USER_ONLY -CPUState *cs =env_cpu (env);TaskState *ts = cs->opaque; ts->swi_errno = errno;
@@ -252,10 +282,9 @@ static inline uint32_t set_swi_errno(CPUARMState *env, uint32_t code)return code; } -static inline uint32_t get_swi_errno (CPUARMState *env) +static inline uint32_t get_swi_errno (CPUState *cs) {#ifdef CONFIG_USER_ONLY -CPUState *cs =env_cpu (env);TaskState *ts = cs->opaque;return ts->swi_errno;
@@ -264,24 +293,22 @@ static inline uint32_t get_swi_errno(CPUARMState *env)#endif } -static target_ulong arm_semi_syscall_len; +static target_ulong common_semi_syscall_len; -static void arm_semi_cb (CPUState *cs,target_ulong ret,target_ulong err) +static void common_semi_cb (CPUState *cs,target_ulong ret,target_ulong err) { -ARMCPU *cpu =ARM_CPU (cs); -CPUARMState *env = &cpu->env; -target_ulong reg0 =is_a64 (env) ? env->xregs[0 ] : env->regs[0 ]; +target_ulong reg0 =common_semi_arg (cs,0 );if (ret == (target_ulong)-1 ) { errno = err; -set_swi_errno (env,-1 ); +set_swi_errno (cs,-1 ); reg0 = ret; }else {/* Fixup syscalls that use nonstardard return conventions. */ switch (reg0) {case TARGET_SYS_WRITE :case TARGET_SYS_READ : - reg0 = arm_semi_syscall_len - ret; + reg0 = common_semi_syscall_len - ret;break ;case TARGET_SYS_SEEK : reg0 =0 ;
@@ -291,77 +318,62 @@ static void arm_semi_cb(CPUState *cs, target_ulong ret, target_ulong err)break ; } } -if (is_a64 (env)) { - env->xregs[0 ] = reg0; - }else { - env->regs[0 ] = reg0; - } +common_semi_set_ret (cs, reg0); } -static target_ulong arm_flen_buf (ARMCPU *cpu) +static target_ulong common_semi_flen_buf (CPUState *cs) { +target_ulong sp; +#ifdef TARGET_ARM /* Return an address in target memory of 64 bytes where the remote * gdb should write its stat struct. (The format of this structure * is defined by GDB's remote protocol and is not target-specific.) * We put this on the guest's stack just below SP. */ +ARMCPU *cpu =ARM_CPU (cs);CPUARMState *env = &cpu->env; -target_ulong sp;if (is_a64 (env)) { sp = env->xregs[31 ]; }else { sp = env->regs[13 ]; } +#endif return sp -64 ; } -static void arm_semi_flen_cb (CPUState *cs,target_ulong ret,target_ulong err) +static void common_semi_flen_cb (CPUState *cs,target_ulong ret,target_ulong err) { -ARMCPU *cpu =ARM_CPU (cs); -CPUARMState *env = &cpu->env;/* The size is always stored in big-endian order, extract the value. We assume the size always fit in 32 bits. */ uint32_t size; -cpu_memory_rw_debug (cs,arm_flen_buf (cpu) +32 , (uint8_t *)&size,4 ,0 ); +cpu_memory_rw_debug (cs,common_semi_flen_buf (cs) +32 , (uint8_t *)&size,4 ,0 ); size =be32_to_cpu (size); -if (is_a64 (env)) { - env->xregs[0 ] = size; - }else { - env->regs[0 ] = size; - } +common_semi_set_ret (cs, size); errno = err; -set_swi_errno (env,-1 ); +set_swi_errno (cs,-1 ); } -static int arm_semi_open_guestfd; +static int common_semi_open_guestfd; -static void arm_semi_open_cb (CPUState *cs,target_ulong ret,target_ulong err) +static void common_semi_open_cb (CPUState *cs,target_ulong ret,target_ulong err) { -ARMCPU *cpu =ARM_CPU (cs); -CPUARMState *env = &cpu->env;if (ret == (target_ulong)-1 ) { errno = err; -set_swi_errno (env,-1 ); -dealloc_guestfd (arm_semi_open_guestfd); - }else { -associate_guestfd (arm_semi_open_guestfd, ret); - ret = arm_semi_open_guestfd; - } - -if (is_a64 (env)) { - env->xregs[0 ] = ret; +set_swi_errno (cs,-1 ); +dealloc_guestfd (common_semi_open_guestfd); }else { - env->regs[0 ] = ret; +associate_guestfd (common_semi_open_guestfd, ret); + ret = common_semi_open_guestfd; } +common_semi_set_ret (cs, ret); } -static target_ulong arm_gdb_syscall (ARMCPU *cpu,gdb_syscall_complete_cb cb, -const char *fmt, ...) +static target_ulong common_semi_gdb_syscall (CPUState *cs,gdb_syscall_complete_cb cb, +const char *fmt, ...) {va_list va; -CPUARMState *env = &cpu->env;va_start (va, fmt);gdb_do_syscallv (cb, fmt, va);
@@ -384,7 +396,7 @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb,* doing something with the return value is not possible to make. */ -return is_a64 (env) ? env->xregs[0 ] : env->regs[0 ]; +return common_semi_arg (cs,0 ); }/*
@@ -393,20 +405,18 @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb,* do the work and return the required return value for the guest, * setting the guest errno if appropriate. */ -typedef uint32_t sys_closefn (ARMCPU *cpu,GuestFD *gf); -typedef uint32_t sys_writefn (ARMCPU *cpu,GuestFD *gf, +typedef uint32_t sys_closefn (CPUState *cs,GuestFD *gf); +typedef uint32_t sys_writefn (CPUState *cs,GuestFD *gf,target_ulong buf,uint32_t len); -typedef uint32_t sys_readfn (ARMCPU *cpu,GuestFD *gf, +typedef uint32_t sys_readfn (CPUState *cs,GuestFD *gf,target_ulong buf,uint32_t len); -typedef uint32_t sys_isattyfn (ARMCPU *cpu,GuestFD *gf); -typedef uint32_t sys_seekfn (ARMCPU *cpu,GuestFD *gf, +typedef uint32_t sys_isattyfn (CPUState *cs,GuestFD *gf); +typedef uint32_t sys_seekfn (CPUState *cs,GuestFD *gf,target_ulong offset); -typedef uint32_t sys_flenfn (ARMCPU *cpu,GuestFD *gf); +typedef uint32_t sys_flenfn (CPUState *cs,GuestFD *gf); -static uint32_t host_closefn (ARMCPU *cpu,GuestFD *gf) +static uint32_t host_closefn (CPUState *cs,GuestFD *gf) { -CPUARMState *env = &cpu->env; -/* * Only close the underlying host fd if it's one we opened on behalf * of the guest in SYS_OPEN.
@@ -416,20 +426,21 @@ static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) gf->hostfd == STDERR_FILENO) {return 0 ; } -return set_swi_errno (env,close (gf->hostfd)); +return set_swi_errno (cs,close (gf->hostfd)); } -static uint32_t host_writefn (ARMCPU *cpu,GuestFD *gf, +static uint32_t host_writefn (CPUState *cs,GuestFD *gf,target_ulong buf,uint32_t len) { +CPUArchState *env = cs->env_ptr;uint32_t ret; -CPUARMState *env = &cpu->env;char *s =lock_user (VERIFY_READ , buf, len,1 ); + (void ) env;/* Used in arm softmmu lock_user implicitly */ if (!s) {/* Return bytes not written on error */ return len; } - ret =set_swi_errno (env,write (gf->hostfd, s, len)); + ret =set_swi_errno (cs,write (gf->hostfd, s, len));unlock_user (s, buf,0 );if (ret == (uint32_t )-1 ) { ret =0 ;
@@ -438,18 +449,19 @@ static uint32_t host_writefn(ARMCPU *cpu, GuestFD *gf,return len - ret; } -static uint32_t host_readfn (ARMCPU *cpu,GuestFD *gf, +static uint32_t host_readfn (CPUState *cs,GuestFD *gf,target_ulong buf,uint32_t len) { +CPUArchState *env = cs->env_ptr;uint32_t ret; -CPUARMState *env = &cpu->env;char *s =lock_user (VERIFY_WRITE , buf, len,0 ); + (void ) env;/* Used in arm softmmu lock_user implicitly */ if (!s) {/* return bytes not read */ return len; }do { - ret =set_swi_errno (env,read (gf->hostfd, s, len)); + ret =set_swi_errno (cs,read (gf->hostfd, s, len)); }while (ret ==-1 && errno ==EINTR );unlock_user (s, buf, len);if (ret == (uint32_t )-1 ) {
@@ -459,68 +471,66 @@ static uint32_t host_readfn(ARMCPU *cpu, GuestFD *gf,return len - ret; } -static uint32_t host_isattyfn (ARMCPU *cpu,GuestFD *gf) +static uint32_t host_isattyfn (CPUState *cs,GuestFD *gf) {return isatty (gf->hostfd); } -static uint32_t host_seekfn (ARMCPU *cpu,GuestFD *gf,target_ulong offset) +static uint32_t host_seekfn (CPUState *cs,GuestFD *gf,target_ulong offset) { -CPUARMState *env = &cpu->env; -uint32_t ret =set_swi_errno (env,lseek (gf->hostfd, offset,SEEK_SET )); +uint32_t ret =set_swi_errno (cs,lseek (gf->hostfd, offset,SEEK_SET ));if (ret == (uint32_t )-1 ) {return -1 ; }return 0 ; } -static uint32_t host_flenfn (ARMCPU *cpu,GuestFD *gf) +static uint32_t host_flenfn (CPUState *cs,GuestFD *gf) { -CPUARMState *env = &cpu->env;struct stat buf; -uint32_t ret =set_swi_errno (env,fstat (gf->hostfd, &buf)); +uint32_t ret =set_swi_errno (cs,fstat (gf->hostfd, &buf));if (ret == (uint32_t )-1 ) {return -1 ; }return buf.st_size; } -static uint32_t gdb_closefn (ARMCPU *cpu,GuestFD *gf) +static uint32_t gdb_closefn (CPUState *cs,GuestFD *gf) { -return arm_gdb_syscall (cpu, arm_semi_cb,"close,%x" , gf->hostfd); +return common_semi_gdb_syscall (cs, common_semi_cb,"close,%x" , gf->hostfd); } -static uint32_t gdb_writefn (ARMCPU *cpu,GuestFD *gf, +static uint32_t gdb_writefn (CPUState *cs,GuestFD *gf,target_ulong buf,uint32_t len) { - arm_semi_syscall_len = len; -return arm_gdb_syscall (cpu, arm_semi_cb,"write,%x,%x,%x" , - gf->hostfd, buf, len); + common_semi_syscall_len = len; +return common_semi_gdb_syscall (cs, common_semi_cb,"write,%x,%x,%x" , + gf->hostfd, buf, len); } -static uint32_t gdb_readfn (ARMCPU *cpu,GuestFD *gf, +static uint32_t gdb_readfn (CPUState *cs,GuestFD *gf,target_ulong buf,uint32_t len) { - arm_semi_syscall_len = len; -return arm_gdb_syscall (cpu, arm_semi_cb,"read,%x,%x,%x" , - gf->hostfd, buf, len); + common_semi_syscall_len = len; +return common_semi_gdb_syscall (cs, common_semi_cb,"read,%x,%x,%x" , + gf->hostfd, buf, len); } -static uint32_t gdb_isattyfn (ARMCPU *cpu,GuestFD *gf) +static uint32_t gdb_isattyfn (CPUState *cs,GuestFD *gf) { -return arm_gdb_syscall (cpu, arm_semi_cb,"isatty,%x" , gf->hostfd); +return common_semi_gdb_syscall (cs, common_semi_cb,"isatty,%x" , gf->hostfd); } -static uint32_t gdb_seekfn (ARMCPU *cpu,GuestFD *gf,target_ulong offset) +static uint32_t gdb_seekfn (CPUState *cs,GuestFD *gf,target_ulong offset) { -return arm_gdb_syscall (cpu, arm_semi_cb,"lseek,%x,%x,0" , - gf->hostfd, offset); +return common_semi_gdb_syscall (cs, common_semi_cb,"lseek,%x,%x,0" , + gf->hostfd, offset); } -static uint32_t gdb_flenfn (ARMCPU *cpu,GuestFD *gf) +static uint32_t gdb_flenfn (CPUState *cs,GuestFD *gf) { -return arm_gdb_syscall (cpu, arm_semi_flen_cb,"fstat,%x,%x" , - gf->hostfd,arm_flen_buf (cpu)); +return common_semi_gdb_syscall (cs, common_semi_flen_cb,"fstat,%x,%x" , + gf->hostfd,common_semi_flen_buf (cs)); }#define SHFB_MAGIC_0 0x53
@@ -549,31 +559,29 @@ static void init_featurefile_guestfd(int guestfd) gf->featurefile_offset =0 ; } -static uint32_t featurefile_closefn (ARMCPU *cpu,GuestFD *gf) +static uint32_t featurefile_closefn (CPUState *cs,GuestFD *gf) {/* Nothing to do */ return 0 ; } -static uint32_t featurefile_writefn (ARMCPU *cpu,GuestFD *gf, +static uint32_t featurefile_writefn (CPUState *cs,GuestFD *gf,target_ulong buf,uint32_t len) {/* This fd can never be open for writing */ -CPUARMState *env = &cpu->env; errno =EBADF ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } -static uint32_t featurefile_readfn (ARMCPU *cpu,GuestFD *gf, +static uint32_t featurefile_readfn (CPUState *cs,GuestFD *gf,target_ulong buf,uint32_t len) { +CPUArchState *env = cs->env_ptr;uint32_t i; -#ifndef CONFIG_USER_ONLY -CPUARMState *env = &cpu->env; -#endif char *s; + (void ) env;/* Used in arm softmmu lock_user implicitly */ s =lock_user (VERIFY_WRITE , buf, len,0 );if (!s) {return len;
@@ -593,19 +601,19 @@ static uint32_t featurefile_readfn(ARMCPU *cpu, GuestFD *gf,return len - i; } -static uint32_t featurefile_isattyfn (ARMCPU *cpu,GuestFD *gf) +static uint32_t featurefile_isattyfn (CPUState *cs,GuestFD *gf) {return 0 ; } -static uint32_t featurefile_seekfn (ARMCPU *cpu,GuestFD *gf, +static uint32_t featurefile_seekfn (CPUState *cs,GuestFD *gf,target_ulong offset) { gf->featurefile_offset = offset;return 0 ; } -static uint32_t featurefile_flenfn (ARMCPU *cpu,GuestFD *gf) +static uint32_t featurefile_flenfn (CPUState *cs,GuestFD *gf) {return sizeof (featurefile_data); }
@@ -649,16 +657,17 @@ static const GuestFDFunctions guestfd_fns[] = {/* Read the input value from the argument block; fail the semihosting * call if the memory read fails. */ +#ifdef TARGET_ARM #define GET_ARG (n) do { \ if (is_a64(env)) { \ if (get_user_u64(arg ## n, args + (n) * 8)) { \ errno = EFAULT; \ - return set_swi_errno(env, -1); \ + return set_swi_errno(cs, -1); \ } \ } else { \ if (get_user_u32(arg ## n, args + (n) * 4)) { \ errno = EFAULT; \ - return set_swi_errno(env, -1); \ + return set_swi_errno(cs, -1); \ } \ } \ } while (0)
@@ -667,6 +676,7 @@ static const GuestFDFunctions guestfd_fns[] = { (is_a64 (env) ? \put_user_u64 (val, args + (n) *8 ) : \ put_user_u32(val, args + (n) * 4)) +#endif /* * Do a semihosting call.
@@ -679,8 +689,7 @@ static const GuestFDFunctions guestfd_fns[] = {*/ target_ulong do_common_semihosting (CPUState *cs) { -ARMCPU *cpu =ARM_CPU (cs); -CPUARMState *env = &cpu->env; +CPUArchState *env = cs->env_ptr;target_ulong args;target_ulong arg0, arg1, arg2, arg3;char * s;
@@ -689,14 +698,9 @@ target_ulong do_common_semihosting(CPUState *cs)uint32_t len;GuestFD *gf; -if (is_a64 (env)) { -/* Note that the syscall number is in W0, not X0 */ - nr = env->xregs[0 ] &0xffffffffU ; - args = env->xregs[1 ]; - }else { - nr = env->regs[0 ]; - args = env->regs[1 ]; - } + (void ) env;/* Used implicitly by arm lock_user macro */ + nr =common_semi_arg (cs,0 ) &0xffffffffU ; + args =common_semi_arg (cs,1 );switch (nr) {case TARGET_SYS_OPEN :
@@ -709,19 +713,19 @@ target_ulong do_common_semihosting(CPUState *cs) s =lock_user_string (arg0);if (!s) { errno =EFAULT ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); }if (arg1 >=12 ) {unlock_user (s, arg0,0 ); errno =EINVAL ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } guestfd =alloc_guestfd ();if (guestfd <0 ) {unlock_user (s, arg0,0 ); errno =EMFILE ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); }if (strcmp (s,":tt" ) ==0 ) {
@@ -750,18 +754,18 @@ target_ulong do_common_semihosting(CPUState *cs)if (arg1 !=0 && arg1 !=1 ) {dealloc_guestfd (guestfd); errno =EACCES ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); }init_featurefile_guestfd (guestfd);return guestfd; }if (use_gdb_syscalls ()) { - arm_semi_open_guestfd = guestfd; - ret =arm_gdb_syscall (cpu, arm_semi_open_cb,"open,%s,%x,1a4" , arg0, - (int )arg2+1 , gdb_open_modeflags[arg1]); + common_semi_open_guestfd = guestfd; + ret =common_semi_gdb_syscall (cs, common_semi_open_cb,"open,%s,%x,1a4" , arg0, + (int )arg2+1 , gdb_open_modeflags[arg1]); }else { - ret =set_swi_errno (env,open (s, open_modeflags[arg1],0644 )); + ret =set_swi_errno (cs,open (s, open_modeflags[arg1],0644 ));if (ret == (uint32_t )-1 ) {dealloc_guestfd (guestfd); }else {
@@ -778,17 +782,17 @@ target_ulong do_common_semihosting(CPUState *cs) gf =get_guestfd (arg0);if (!gf) { errno =EBADF ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } - ret = guestfd_fns[gf->type].closefn (cpu, gf); + ret = guestfd_fns[gf->type].closefn (cs, gf);dealloc_guestfd (arg0);return ret;case TARGET_SYS_WRITEC : -qemu_semihosting_console_outc (env, args); +qemu_semihosting_console_outc (cs->env_ptr, args);return 0xdeadbeef ;case TARGET_SYS_WRITE0 : -return qemu_semihosting_console_outs (env, args); +return qemu_semihosting_console_outs (cs->env_ptr, args);case TARGET_SYS_WRITE :GET_ARG (0 );GET_ARG (1 );
@@ -798,10 +802,10 @@ target_ulong do_common_semihosting(CPUState *cs) gf =get_guestfd (arg0);if (!gf) { errno =EBADF ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } -return guestfd_fns[gf->type].writefn (cpu, gf, arg1, len); +return guestfd_fns[gf->type].writefn (cs, gf, arg1, len);case TARGET_SYS_READ :GET_ARG (0 );GET_ARG (1 );
@@ -811,22 +815,22 @@ target_ulong do_common_semihosting(CPUState *cs) gf =get_guestfd (arg0);if (!gf) { errno =EBADF ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } -return guestfd_fns[gf->type].readfn (cpu, gf, arg1, len); +return guestfd_fns[gf->type].readfn (cs, gf, arg1, len);case TARGET_SYS_READC : -return qemu_semihosting_console_inc (env); +return qemu_semihosting_console_inc (cs->env_ptr);case TARGET_SYS_ISTTY :GET_ARG (0 ); gf =get_guestfd (arg0);if (!gf) { errno =EBADF ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } -return guestfd_fns[gf->type].isattyfn (cpu, gf); +return guestfd_fns[gf->type].isattyfn (cs, gf);case TARGET_SYS_SEEK :GET_ARG (0 );GET_ARG (1 );
@@ -834,20 +838,20 @@ target_ulong do_common_semihosting(CPUState *cs) gf =get_guestfd (arg0);if (!gf) { errno =EBADF ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } -return guestfd_fns[gf->type].seekfn (cpu, gf, arg1); +return guestfd_fns[gf->type].seekfn (cs, gf, arg1);case TARGET_SYS_FLEN :GET_ARG (0 ); gf =get_guestfd (arg0);if (!gf) { errno =EBADF ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } -return guestfd_fns[gf->type].flenfn (cpu, gf); +return guestfd_fns[gf->type].flenfn (cs, gf);case TARGET_SYS_TMPNAM :qemu_log_mask (LOG_UNIMP ,"%s: SYS_TMPNAM not implemented" , __func__);return -1 ;
@@ -855,15 +859,15 @@ target_ulong do_common_semihosting(CPUState *cs)GET_ARG (0 );GET_ARG (1 );if (use_gdb_syscalls ()) { - ret =arm_gdb_syscall (cpu, arm_semi_cb,"unlink,%s" , - arg0, (int )arg1+1 ); + ret =common_semi_gdb_syscall (cs, common_semi_cb,"unlink,%s" , + arg0, (int )arg1+1 ); }else { s =lock_user_string (arg0);if (!s) { errno =EFAULT ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } - ret =set_swi_errno (env,remove (s)); + ret =set_swi_errno (cs,remove (s));unlock_user (s, arg0,0 ); }return ret;
@@ -873,17 +877,17 @@ target_ulong do_common_semihosting(CPUState *cs)GET_ARG (2 );GET_ARG (3 );if (use_gdb_syscalls ()) { -return arm_gdb_syscall (cpu, arm_semi_cb,"rename,%s,%s" , - arg0, (int )arg1+1 , arg2, (int )arg3+1 ); +return common_semi_gdb_syscall (cs, common_semi_cb,"rename,%s,%s" , + arg0, (int )arg1+1 , arg2, (int )arg3+1 ); }else {char *s2; s =lock_user_string (arg0); s2 =lock_user_string (arg2);if (!s || !s2) { errno =EFAULT ; - ret =set_swi_errno (env,-1 ); + ret =set_swi_errno (cs,-1 ); }else { - ret =set_swi_errno (env,rename (s, s2)); + ret =set_swi_errno (cs,rename (s, s2)); }if (s2)unlock_user (s2, arg2,0 );
@@ -894,25 +898,25 @@ target_ulong do_common_semihosting(CPUState *cs)case TARGET_SYS_CLOCK :return clock () / (CLOCKS_PER_SEC /100 );case TARGET_SYS_TIME : -return set_swi_errno (env,time (NULL )); +return set_swi_errno (cs,time (NULL ));case TARGET_SYS_SYSTEM :GET_ARG (0 );GET_ARG (1 );if (use_gdb_syscalls ()) { -return arm_gdb_syscall (cpu, arm_semi_cb,"system,%s" , - arg0, (int )arg1+1 ); +return common_semi_gdb_syscall (cs, common_semi_cb,"system,%s" , + arg0, (int )arg1+1 ); }else { s =lock_user_string (arg0);if (!s) { errno =EFAULT ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } - ret =set_swi_errno (env,system (s)); + ret =set_swi_errno (cs,system (s));unlock_user (s, arg0,0 );return ret; }case TARGET_SYS_ERRNO : -return get_swi_errno (env); +return get_swi_errno (cs);case TARGET_SYS_GET_CMDLINE : {/* Build a command-line from the original argv.
@@ -964,21 +968,21 @@ target_ulong do_common_semihosting(CPUState *cs)if (output_size > input_size) {/* Not enough space to store command-line arguments. */ errno =E2BIG ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); }/* Adjust the command-line length. */ if (SET_ARG (1 , output_size -1 )) {/* Couldn't write back to argument block */ errno =EFAULT ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); }/* Lock the buffer on the ARM side. */ output_buffer =lock_user (VERIFY_WRITE , arg0, output_size,0 );if (!output_buffer) { errno =EFAULT ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); }/* Copy the command-line arguments. */
@@ -994,7 +998,7 @@ target_ulong do_common_semihosting(CPUState *cs)if (copy_from_user (output_buffer, ts->info->arg_start, output_size)) { errno =EFAULT ; - status =set_swi_errno (env,-1 ); + status =set_swi_errno (cs,-1 ); goto out; }
@@ -1031,7 +1035,7 @@ target_ulong do_common_semihosting(CPUState *cs)abi_ulong ret; ts->heap_base =do_brk (0 ); - limit = ts->heap_base +ARM_ANGEL_HEAP_SIZE ; + limit = ts->heap_base +COMMON_SEMI_HEAP_SIZE ;/* Try a big heap, and reduce the size if that fails. */ for (;;) { ret =do_brk (limit);
@@ -1059,23 +1063,19 @@ target_ulong do_common_semihosting(CPUState *cs)for (i =0 ; i <ARRAY_SIZE (retvals); i++) {bool fail; -if (is_a64 (env)) { - fail =put_user_u64 (retvals[i], arg0 + i *8 ); - }else { - fail =put_user_u32 (retvals[i], arg0 + i *4 ); - } + fail =SET_ARG (i, retvals[i]);if (fail) {/* Couldn't write back to argument block */ errno =EFAULT ; -return set_swi_errno (env,-1 ); +return set_swi_errno (cs,-1 ); } }return 0 ; }case TARGET_SYS_EXIT :case TARGET_SYS_EXIT_EXTENDED : -if (nr ==TARGET_SYS_EXIT_EXTENDED ||is_a64 (env)) { +if (common_semi_sys_exit_extended (cs, nr)) {/* * The A64 version of SYS_EXIT takes a parameter block, * so the application-exit type can return a subcode which
@@ -1100,7 +1100,7 @@ target_ulong do_common_semihosting(CPUState *cs)*/ ret = (args == ADP_Stopped_ApplicationExit) ?0 :1 ; } -gdb_exit (env, ret); +gdb_exit (cs->env_ptr, ret);exit (ret);case TARGET_SYS_SYNCCACHE :/*
@@ -1108,9 +1108,11 @@ target_ulong do_common_semihosting(CPUState *cs)* virtual address range. This is a nop for us since we don't * implement caches. This is only present on A64. */ -if (is_a64 (env)) { +#ifdef TARGET_ARM +if (is_a64 (cs->env_ptr)) {return 0 ; } +#endif /* fall through -- invalid for A32/T32 */ default :fprintf (stderr,"qemu: Unsupported SemiHosting SWI 0x%02x\n" , nr);
Signature · 1 line
2.28.0
PATCH 4/4 riscv: Add semihosting support [v10]
In reply to Keith PackardAdapt the arm semihosting support code for RISCV. This implementation is based on the standard for RISC-V semihosting version 0.2 as documented in
https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2
---
v2:
Update PC after exception is handled to follow change in the ARM version for SYS_READC
v3:
Disallow semihosting in user mode; report a regular breakpoint in that case.
v4:
Fix errors reported by checkpatch
v5:
Reference current RISC-V semihosting specification
v6:
Add support for semihosting in riscv64-linux-user and riscv32-linux-user
v7:
Add meson build support
v8:
Fix errors reported by checkpatch that crept in.
v9:
Changes suggested by Alistair Francis <[email protected]>:
Don't add me to the MAINTAINERS file.
Remove duplicate #include in target/riscv/cpu.h Reference RISC-V semihosting spec in target/riscv/riscv-semi.c
v10:
Use common semihosting implementation instead of a separate copy.
Make sure addresses of the three breakpoint-signaling instructions all lie within the same page. Change suggested by Richard Henderson <[email protected]>
--- default-configs/devices/riscv32-softmmu.mak | 1 + default-configs/devices/riscv64-softmmu.mak | 1 + hw/semihosting/common-semi.c | 51 ++++++++++++++++++- hw/semihosting/common-semi.h | 5 +- hw/semihosting/meson.build | 2 + linux-user/meson.build | 3 ++ linux-user/qemu.h | 4 +- linux-user/semihost.c | 8 +-- qemu-options.hx | 10 ++-- target/riscv/cpu_bits.h | 1 + target/riscv/cpu_helper.c | 10 ++++ .../riscv/insn_trans/trans_privileged.c.inc | 37 +++++++++++++- target/riscv/translate.c | 11 ++++ 13 files changed, 132 insertions(+), 12 deletions(-)
default-configs/devices/riscv32-softmmu.mak +1 -0
@@ -3,6 +3,7 @@ # Uncomment the following lines to disable these optional devices: # #CONFIG_PCI_DEVICES=n +CONFIG_SEMIHOSTING=y # Boards: #
default-configs/devices/riscv64-softmmu.mak +1 -0
@@ -3,6 +3,7 @@ # Uncomment the following lines to disable these optional devices: # #CONFIG_PCI_DEVICES=n +CONFIG_SEMIHOSTING=y # Boards: #
hw/semihosting/common-semi.c +50 -1
86 lines not on this page · raw message
hw/semihosting/common-semi.h +4 -1
@@ -1,6 +1,6 @@/* * Semihosting support for systems modeled on the Arm "Angel" -* semihosting syscalls design. +* semihosting syscalls design. This includes Arm and RISC-V processors * * Copyright (c) 2005, 2007 CodeSourcery. * Copyright (c) 2019 Linaro
@@ -26,6 +26,9 @@* Semihosting for AArch32 and AArch64 Release 2.0 * https://static.docs.arm.com/100863/0200/semihosting.pdf * +* RISC-V Semihosting is documented in: +* RISC-V Semihosting +* https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc */ #ifndef COMMON_SEMI_H
hw/semihosting/meson.build +2 -0
@@ -4,3 +4,5 @@ specific_ss.add(when: 'CONFIG_SEMIHOSTING', if_true: files( )) specific_ss.add(when: 'CONFIG_TCG', if_true: files ('common-semi.c')) +specific_ss.add(when: 'TARGET_RISCV32', if_true: files ('common-semi.c')) +specific_ss.add(when: 'TARGET_RISCV64', if_true: files ('common-semi.c'))
linux-user/meson.build +3 -0
@@ -20,6 +20,9 @@ linux_user_ss.add(when: 'TARGET_I386', if_true: files('vm86.c')) linux_user_ss.add(when: 'TARGET_AARCH64', if_true: files('semihost.c')) linux_user_ss.add(when: 'TARGET_ARM', if_true: files('semihost.c')) +linux_user_ss.add(when: 'TARGET_RISCV64', if_true: files('semihost.c')) +linux_user_ss.add(when: 'TARGET_RISCV32', if_true: files('semihost.c')) + syscall_nr_generators = {} subdir('alpha')
linux-user/qemu.h +3 -1
@@ -105,6 +105,8 @@ typedef struct TaskState {/* FPA state */ FPA11 fpa;# endif +#endif +#if defined(TARGET_ARM ) || defined(TARGET_RISCV )int swi_errno;#endif #if defined(TARGET_I386 ) && !defined(TARGET_X86_64 )
@@ -118,7 +120,7 @@ typedef struct TaskState {#ifdef TARGET_M68K abi_ulong tp_value;#endif -#if defined(TARGET_ARM ) || defined(TARGET_M68K ) +#if defined(TARGET_ARM ) || defined(TARGET_M68K ) || defined(TARGET_RISCV )/* Extra fields for semihosted binaries. */ abi_ulong heap_base;abi_ulong heap_limit;
linux-user/semihost.c +4 -4
@@ -1,11 +1,11 @@/* -* ARM Semihosting Console Support +* ARM Compatible Semihosting Console Support. * * Copyright (c) 2019 Linaro Ltd * -* Currently ARM is unique in having support for semihosting support -* in linux-user. So for now we implement the common console API but -* just for arm linux-user. +* Currently ARM and RISC-V are unique in having support for +* semihosting support in linux-user. So for now we implement the +* common console API but just for arm and risc-v linux-user. * * SPDX-License-Identifier: GPL-2.0-or-later */
qemu-options.hx +6 -4
@@ -4184,10 +4184,10 @@ ERST DEF("semihosting", 0, QEMU_OPTION_semihosting, "-semihosting semihosting mode\n", QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32 | - QEMU_ARCH_MIPS | QEMU_ARCH_NIOS2) + QEMU_ARCH_MIPS | QEMU_ARCH_NIOS2 | QEMU_ARCH_RISCV) SRST ``-semihosting`` - Enable semihosting mode (ARM, M68K, Xtensa, MIPS, Nios II only). + Enable semihosting mode (ARM, M68K, Xtensa, MIPS, Nios II, RISC-V only). Note that this allows guest direct access to the host filesystem, so should only be used with a trusted guest OS.
@@ -4199,10 +4199,10 @@ DEF("semihosting-config", HAS_ARG, QEMU_OPTION_semihosting_config, "-semihosting-config [enable=on|off][,target=native|gdb|auto][,chardev=id][,arg=str[,...]]\n" \ " semihosting configuration\n", QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32 | -QEMU_ARCH_MIPS | QEMU_ARCH_NIOS2) +QEMU_ARCH_MIPS | QEMU_ARCH_NIOS2 | QEMU_ARCH_RISCV) SRST ``-semihosting-config [enable=on|off][,target=native|gdb|auto][,chardev=id][,arg=str[,...]]`` - Enable and configure semihosting (ARM, M68K, Xtensa, MIPS, Nios II + Enable and configure semihosting (ARM, M68K, Xtensa, MIPS, Nios II, RISC-V only). Note that this allows guest direct access to the host filesystem, so
@@ -4217,6 +4217,8 @@ SRST open/read/write/seek/select. Tensilica baremetal libc for ISS and linux platform "sim" use this interface. + On RISC-V this implements the standard semihosting API, version 0.2. + ``target=native|gdb|auto`` Defines where the semihosting calls will be addressed, to QEMU (``native``) or to GDB (``gdb``). The default is ``auto``, which
target/riscv/cpu_bits.h +1 -0
@@ -556,6 +556,7 @@#define RISCV_EXCP_INST_PAGE_FAULT 0xc/* since: priv-1.10.0 */ #define RISCV_EXCP_LOAD_PAGE_FAULT 0xd/* since: priv-1.10.0 */ #define RISCV_EXCP_STORE_PAGE_FAULT 0xf/* since: priv-1.10.0 */ +#define RISCV_EXCP_SEMIHOST 0x10#define RISCV_EXCP_INST_GUEST_PAGE_FAULT 0x14#define RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT 0x15#define RISCV_EXCP_VIRT_INSTRUCTION_FAULT 0x16
target/riscv/cpu_helper.c +10 -0
@@ -24,6 +24,7 @@#include "exec/exec-all.h" #include "tcg/tcg-op.h" #include "trace.h" +#include "hw/semihosting/common-semi.h" int riscv_cpu_mmu_index (CPURISCVState *env,bool ifetch) {
@@ -875,6 +876,15 @@ void riscv_cpu_do_interrupt(CPUState *cs)target_ulong htval =0 ;target_ulong mtval2 =0 ; +if (cause ==RISCV_EXCP_SEMIHOST ) { +if (env->priv >=PRV_S ) { + env->gpr[xA0] =do_common_semihosting (cs); + env->pc +=4 ; +return ; + } + cause =RISCV_EXCP_BREAKPOINT ; + } +if (!async) {/* set tval to badaddr for traps with address information */ switch (cause) {
target/riscv/insn_trans/trans_privileged.c.inc +36 -1
@@ -29,7 +29,42 @@ static bool trans_ecall(DisasContext *ctx, arg_ecall *a) static bool trans_ebreak(DisasContext *ctx, arg_ebreak *a) { - generate_exception(ctx, RISCV_EXCP_BREAKPOINT); + target_ulong ebreak_addr = ctx->base.pc_next; + target_ulong pre_addr = ebreak_addr - 4; + target_ulong post_addr = ebreak_addr + 4; + uint32_t pre = 0; + uint32_t ebreak = 0; + uint32_t post = 0; + + /* + * The RISC-V semihosting spec specifies the following + * three-instruction sequence to flag a semihosting call: + * + * slli zero, zero, 0x1f 0x01f01013 + * ebreak 0x00100073 + * srai zero, zero, 0x7 0x40705013 + * + * The two shift operations on the zero register are no-ops, used + * here to signify a semihosting exception, rather than a breakpoint. + * + * Uncompressed instructions are required so that the sequence is easy + * to validate. + * + * The three instructions are required to lie in the same page so + * that no exception will be raised when fetching them. + */ + + if ((pre_addr & TARGET_PAGE_MASK) == (post_addr & TARGET_PAGE_MASK)) { + pre = opcode_at(&ctx->base, pre_addr); + ebreak = opcode_at(&ctx->base, ebreak_addr); + post = opcode_at(&ctx->base, post_addr); + } + + if (pre == 0x01f01013 && ebreak == 0x00100073 && post == 0x40705013) { + generate_exception(ctx, RISCV_EXCP_SEMIHOST); + } else { + generate_exception(ctx, RISCV_EXCP_BREAKPOINT); + } exit_tb(ctx); /* no chaining */ ctx->base.is_jmp = DISAS_NORETURN; return true;
target/riscv/translate.c +11 -0
@@ -63,6 +63,7 @@ typedef struct DisasContext {uint16_t vlen;uint16_t mlen;bool vl_eq_vlmax; +CPUState *cs; } DisasContext;#ifdef TARGET_RISCV64
@@ -746,6 +747,15 @@ static bool gen_shift(DisasContext *ctx, arg_r *a,return true; } +static uint32_t opcode_at (DisasContextBase *dcbase,target_ulong pc) +{ +DisasContext *ctx =container_of (dcbase, DisasContext, base); +CPUState *cpu = ctx->cs; +CPURISCVState *env = cpu->env_ptr; + +return cpu_ldl_code (env, pc); +} +/* Include insn module translation function */ #include "insn_trans/trans_rvi.c.inc" #include "insn_trans/trans_rvm.c.inc"
@@ -812,6 +822,7 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) ctx->lmul =FIELD_EX32 (tb_flags,TB_FLAGS ,LMUL ); ctx->mlen =1 << (ctx->sew +3 - ctx->lmul); ctx->vl_eq_vlmax =FIELD_EX32 (tb_flags,TB_FLAGS ,VL_EQ_VLMAX ); + ctx->cs = cs; }static void riscv_tr_tb_start (DisasContextBase *db,CPUState *cpu)
Signature · 1 line
2.28.0
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series seems to have some coding style problems. See output below for more information:
Type: series
Message-id: [email protected]
Subject: [PATCH 0/4] riscv: Add semihosting support [v10]
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/[email protected] -> patchew/[email protected]
Switched to a new branch 'test'
e13a1a6 riscv: Add semihosting support [v10]
3ecdba3 semihosting: Change internal common-semi interfaces to use CPUState * ee6bc19 semihosting: Change common-semi API to be architecture-independent 5565c62 semihosting: Move ARM semihosting code to shared directories
=== OUTPUT BEGIN ===
1/4 Checking commit 5565c62ebb1a (semihosting: Move ARM semihosting code to shared directories)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#21:
rename from target/arm/arm-semi.c
total: 0 errors, 1 warnings, 27 lines checked
Patch 1/4 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/4 Checking commit ee6bc19d36dd (semihosting: Change common-semi API to be architecture-independent)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#66:
new file mode 100644
total: 0 errors, 1 warnings, 163 lines checked
Patch 2/4 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
3/4 Checking commit 3ecdba3733cf (semihosting: Change internal common-semi interfaces to use CPUState *)
ERROR: braces {} are necessary for all arms of this statement
#86: FILE: hw/semihosting/common-semi.c:142:
+ if (is_a64(env))
[...]
+ else
[...]
ERROR: braces {} are necessary for all arms of this statement #97: FILE: hw/semihosting/common-semi.c:153:
+ if (is_a64(env))
[...]
+ else
[...]
WARNING: line over 80 characters
#205: FILE: hw/semihosting/common-semi.c:346:
+static void common_semi_flen_cb(CPUState *cs, target_ulong ret, target_ulong err)
WARNING: line over 80 characters
#213: FILE: hw/semihosting/common-semi.c:351:
+ cpu_memory_rw_debug(cs, common_semi_flen_buf(cs) + 32, (uint8_t *)&size, 4, 0);
WARNING: line over 80 characters
#230: FILE: hw/semihosting/common-semi.c:360:
+static void common_semi_open_cb(CPUState *cs, target_ulong ret, target_ulong err)
WARNING: line over 80 characters
#257: FILE: hw/semihosting/common-semi.c:373:
+static target_ulong common_semi_gdb_syscall(CPUState *cs, gdb_syscall_complete_cb cb,
WARNING: line over 80 characters
#599: FILE: hw/semihosting/common-semi.c:765:
+ ret = common_semi_gdb_syscall(cs, common_semi_open_cb, "open,%s,%x,1a4", arg0,
WARNING: line over 80 characters
#600: FILE: hw/semihosting/common-semi.c:766:
+ (int)arg2+1, gdb_open_modeflags[arg1]);
ERROR: spaces required around that '+' (ctx:VxV)
#600: FILE: hw/semihosting/common-semi.c:766:
+ (int)arg2+1, gdb_open_modeflags[arg1]);
^ERROR: spaces required around that '+' (ctx:VxV)
#702: FILE: hw/semihosting/common-semi.c:863:
+ arg0, (int)arg1+1);
^WARNING: line over 80 characters
#722: FILE: hw/semihosting/common-semi.c:881:
+ arg0, (int)arg1+1, arg2, (int)arg3+1);
ERROR: spaces required around that '+' (ctx:VxV)
#722: FILE: hw/semihosting/common-semi.c:881:
+ arg0, (int)arg1+1, arg2, (int)arg3+1);
^ERROR: spaces required around that '+' (ctx:VxV)
#722: FILE: hw/semihosting/common-semi.c:881:
+ arg0, (int)arg1+1, arg2, (int)arg3+1);
^ERROR: spaces required around that '+' (ctx:VxV)
#750: FILE: hw/semihosting/common-semi.c:907:
+ arg0, (int)arg1+1);
^total: 7 errors, 7 warnings, 767 lines checked
Patch 3/4 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
4/4 Checking commit e13a1a60ecc7 (riscv: Add semihosting support [v10]) === OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]