Skip to contentSkip to conversation

drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes

PATCH Superseded Manasi Navare 2 participants 7 messages Oct 27, 2020 – Oct 28, 2020

Subsystems (3)

v2 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/5 drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes

No functional changes. This patch just moves some mode checks around to prepare for adding bigjoiner related mode validation

---
 drivers/gpu/drm/i915/display/intel_dp.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +6 -6
index 818daab252f3..2c29e7f5281b 100644
@@ -721,6 +721,9 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		return MODE_H_ILLEGAL;
+
 	if (intel_dp_is_edp(intel_dp) && fixed_mode) {
 		if (mode->hdisplay > fixed_mode->hdisplay)
 			return MODE_PANEL;
@@ -731,6 +734,9 @@ intel_dp_mode_valid(struct drm_connector *connector,
 		target_clock = fixed_mode->clock;
 	}
 
+	if (mode->clock < 10000)
+		return MODE_CLOCK_LOW;
+
 	max_link_clock = intel_dp_max_link_rate(intel_dp);
 	max_lanes = intel_dp_max_lane_count(intel_dp);
 
@@ -771,12 +777,6 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	    target_clock > max_dotclk)
 		return MODE_CLOCK_HIGH;
 
-	if (mode->clock < 10000)
-		return MODE_CLOCK_LOW;
-
-	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
-		return MODE_H_ILLEGAL;
-
 	status = intel_dp_mode_valid_downstream(intel_connector,
 						mode, target_clock);
 	if (status != MODE_OK)
Signature · 6 lines
2.19.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v2 2/5 drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder split

From: Maarten Lankhorst <[email protected]>

With bigjoiner, there will be 2 pipes driving 2 halfs of 1 transcoder, because of this, we need a pipe_mode for various calculations, including for example watermarks, plane clipping, etc.

v7:
* Remove redundant comment (Ville)
* Just keep mode instead of pipe_mode (Ville)
v6:
* renaming in separate function, only pipe_mode here (Ville)
* Add description (Maarten)
v5:
* Rebase (Manasi)
v4:
* Manual rebase (Manasi)
v3:
* Change state to crtc_state, fix rebase err (Manasi) v2:
* Manual Rebase (Manasi)

---
 drivers/gpu/drm/i915/display/intel_display.c  | 38 +++++-----
 .../drm/i915/display/intel_display_types.h    | 11 ++-
 drivers/gpu/drm/i915/intel_pm.c               | 76 +++++++++----------
 3 files changed, 68 insertions(+), 57 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +21 -17
index f41b6f8b5618..756683b2a5be 100644
@@ -6167,18 +6167,16 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
 
 static int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state)
 {
-	const struct drm_display_mode *adjusted_mode =
-		&crtc_state->hw.adjusted_mode;
+	const struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode;
 	int width, height;
 
 	if (crtc_state->pch_pfit.enabled) {
 		width = drm_rect_width(&crtc_state->pch_pfit.dst);
 		height = drm_rect_height(&crtc_state->pch_pfit.dst);
 	} else {
-		width = adjusted_mode->crtc_hdisplay;
-		height = adjusted_mode->crtc_vdisplay;
+		width = pipe_mode->crtc_hdisplay;
+		height = pipe_mode->crtc_vdisplay;
 	}
-
 	return skl_update_scaler(crtc_state, !crtc_state->hw.active,
 				 SKL_CRTC_INDEX,
 				 &crtc_state->scaler_state.scaler_id,
@@ -8192,7 +8190,7 @@ static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
 
 static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *crtc_state)
 {
-	u32 pixel_rate = crtc_state->hw.adjusted_mode.crtc_clock;
+	u32 pixel_rate = crtc_state->hw.pipe_mode.crtc_clock;
 	unsigned int pipe_w, pipe_h, pfit_w, pfit_h;
 
 	/*
@@ -8229,7 +8227,7 @@ static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
 	if (HAS_GMCH(dev_priv))
 		/* FIXME calculate proper pipe pixel rate for GMCH pfit */
 		crtc_state->pixel_rate =
-			crtc_state->hw.adjusted_mode.crtc_clock;
+			crtc_state->hw.pipe_mode.crtc_clock;
 	else
 		crtc_state->pixel_rate =
 			ilk_pipe_pixel_rate(crtc_state);
@@ -8239,7 +8237,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 				     struct intel_crtc_state *pipe_config)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
+	const struct drm_display_mode *pipe_mode = &pipe_config->hw.pipe_mode;
 	int clock_limit = dev_priv->max_dotclk_freq;
 
 	if (INTEL_GEN(dev_priv) < 4) {
@@ -8250,16 +8248,16 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 		 * is > 90% of the (display) core speed.
 		 */
 		if (intel_crtc_supports_double_wide(crtc) &&
-		    adjusted_mode->crtc_clock > clock_limit) {
+		    pipe_mode->crtc_clock > clock_limit) {
 			clock_limit = dev_priv->max_dotclk_freq;
 			pipe_config->double_wide = true;
 		}
 	}
 
-	if (adjusted_mode->crtc_clock > clock_limit) {
+	if (pipe_mode->crtc_clock > clock_limit) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
-			    adjusted_mode->crtc_clock, clock_limit,
+			    pipe_mode->crtc_clock, clock_limit,
 			    yesno(pipe_config->double_wide));
 		return -EINVAL;
 	}
@@ -8302,7 +8300,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 	 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
 	 */
 	if ((INTEL_GEN(dev_priv) > 4 || IS_G4X(dev_priv)) &&
-		adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
+		pipe_mode->crtc_hsync_start == pipe_mode->crtc_hdisplay)
 		return -EINVAL;
 
 	intel_crtc_compute_pixel_rate(pipe_config);
@@ -12821,15 +12819,15 @@ static bool c8_planes_changed(const struct intel_crtc_state *new_crtc_state)
 
 static u16 hsw_linetime_wm(const struct intel_crtc_state *crtc_state)
 {
-	const struct drm_display_mode *adjusted_mode =
-		&crtc_state->hw.adjusted_mode;
+	const struct drm_display_mode *pipe_mode =
+		&crtc_state->hw.pipe_mode;
 	int linetime_wm;
 
 	if (!crtc_state->hw.enable)
 		return 0;
 
-	linetime_wm = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
-					adjusted_mode->crtc_clock);
+	linetime_wm = DIV_ROUND_CLOSEST(pipe_mode->crtc_htotal * 1000 * 8,
+					pipe_mode->crtc_clock);
 
 	return min(linetime_wm, 0x1ff);
 }
@@ -13459,8 +13457,9 @@ intel_crtc_copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)
 	crtc_state->hw.enable = crtc_state->uapi.enable;
 	crtc_state->hw.active = crtc_state->uapi.active;
 	crtc_state->hw.mode = crtc_state->uapi.mode;
-	crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode;
+	crtc_state->hw.pipe_mode = crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode;
 	crtc_state->hw.scaling_filter = crtc_state->uapi.scaling_filter;
+
 	intel_crtc_copy_uapi_to_hw_state_nomodeset(crtc_state);
 }
 
@@ -13657,6 +13656,9 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
 		    "hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
 		    base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
 
+	/* without bigjoiner, pipe_mode == adjusted_mode */
+	pipe_config->hw.pipe_mode = pipe_config->hw.adjusted_mode;
+
 	return 0;
 }
 
@@ -18914,6 +18916,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			 */
 			crtc_state->inherited = true;
 
+			crtc_state->hw.pipe_mode = crtc_state->hw.adjusted_mode;
+
 			intel_crtc_compute_pixel_rate(crtc_state);
 
 			intel_crtc_update_active_timings(crtc_state);
drivers/gpu/drm/i915/display/intel_display_types.h +9 -2
index f6f0626649e0..b526afee595c 100644
@@ -817,15 +817,22 @@ struct intel_crtc_state {
 	 * The following members are used to verify the hardware state:
 	 * - enable
 	 * - active
-	 * - mode / adjusted_mode
+	 * - mode/adjusted_mode
 	 * - color property blobs.
 	 *
 	 * During initial hw readout, they need to be copied to uapi.
+	 *
+	 * Bigjoiner will allow a transcoder mode that spans 2 pipes;
+	 * Use the pipe_mode for calculations like watermarks, pipe
+	 * scaler, and bandwidth.
+	 *
+	 * Use adjusted_mode for things that need to know the full
+	 * mode on the transcoder, which spans all pipes.
 	 */
 	struct {
 		bool active, enable;
 		struct drm_property_blob *degamma_lut, *gamma_lut, *ctm;
-		struct drm_display_mode mode, adjusted_mode;
+		struct drm_display_mode mode, pipe_mode, adjusted_mode;
 		enum drm_scaling_filter scaling_filter;
 	} hw;
 
drivers/gpu/drm/i915/intel_pm.c +38 -38

215 lines not on this page · raw message

Signature · 6 lines
2.19.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v2 3/5 drm/i915: Pass intel_atomic_state instead of drm_atomic_state

In reply to Manasi Navare

No functional changes, to align with previous cleanups pass intel_atomic_state instead of drm_atomic_state. Also pass this intel_atomic_state with crtc_state to some of the atomic_check functions.

---
 drivers/gpu/drm/i915/display/intel_display.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -7
index 756683b2a5be..396ddcbb1520 100644
@@ -12661,7 +12661,7 @@ static bool encoders_cloneable(const struct intel_encoder *a,
 			  b->cloneable & (1 << a->type));
 }
 
-static bool check_single_encoder_cloning(struct drm_atomic_state *state,
+static bool check_single_encoder_cloning(struct intel_atomic_state *state,
 					 struct intel_crtc *crtc,
 					 struct intel_encoder *encoder)
 {
@@ -12670,7 +12670,7 @@ static bool check_single_encoder_cloning(struct drm_atomic_state *state,
 	struct drm_connector_state *connector_state;
 	int i;
 
-	for_each_new_connector_in_state(state, connector, connector_state, i) {
+	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
 		if (connector_state->crtc != &crtc->base)
 			continue;
 
@@ -13521,10 +13521,10 @@ intel_crtc_prepare_cleared_state(struct intel_crtc_state *crtc_state)
 }
 
 static int
-intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
+intel_modeset_pipe_config(struct intel_atomic_state *state,
+			  struct intel_crtc_state *pipe_config)
 {
 	struct drm_crtc *crtc = pipe_config->uapi.crtc;
-	struct drm_atomic_state *state = pipe_config->uapi.state;
 	struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
 	struct drm_connector *connector;
 	struct drm_connector_state *connector_state;
@@ -13566,7 +13566,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
 			       &pipe_config->pipe_src_w,
 			       &pipe_config->pipe_src_h);
 
-	for_each_new_connector_in_state(state, connector, connector_state, i) {
+	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
 		struct intel_encoder *encoder =
 			to_intel_encoder(connector_state->best_encoder);
 
@@ -13604,7 +13604,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
 	 * adjust it according to limitations or connector properties, and also
 	 * a chance to reject the mode entirely.
 	 */
-	for_each_new_connector_in_state(state, connector, connector_state, i) {
+	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
 		struct intel_encoder *encoder =
 			to_intel_encoder(connector_state->best_encoder);
 
@@ -15228,7 +15228,7 @@ static int intel_atomic_check(struct drm_device *dev,
 		if (!new_crtc_state->hw.enable)
 			continue;
 
-		ret = intel_modeset_pipe_config(new_crtc_state);
+		ret = intel_modeset_pipe_config(state, new_crtc_state);
 		if (ret)
 			goto fail;
 	}
Signature · 6 lines
2.19.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v2 4/5 drm/i915/dp: Prep for bigjoiner atomic check

In reply to Manasi Navare

No functional changes here. Just pass intel_atomic_state along with crtc_state to certain atomic_check functions. This will lay the foundation for adding bigjoiner master/slave states in atomic check.

v2:
* More prep with intel_atomic_state (Ville)

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_atomic.c  |  9 +++++----
 drivers/gpu/drm/i915/display/intel_atomic.h  |  3 ++-
 drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++--------
 3 files changed, 20 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/display/intel_atomic.c +5 -4
index 86be032bcf96..e243ce97b534 100644
@@ -270,14 +270,15 @@ void intel_crtc_free_hw_state(struct intel_crtc_state *crtc_state)
 	intel_crtc_put_color_blobs(crtc_state);
 }
 
-void intel_crtc_copy_color_blobs(struct intel_crtc_state *crtc_state)
+void intel_crtc_copy_color_blobs(struct intel_crtc_state *crtc_state,
+				 const struct intel_crtc_state *from_crtc_state)
 {
 	drm_property_replace_blob(&crtc_state->hw.degamma_lut,
-				  crtc_state->uapi.degamma_lut);
+				  from_crtc_state->uapi.degamma_lut);
 	drm_property_replace_blob(&crtc_state->hw.gamma_lut,
-				  crtc_state->uapi.gamma_lut);
+				  from_crtc_state->uapi.gamma_lut);
 	drm_property_replace_blob(&crtc_state->hw.ctm,
-				  crtc_state->uapi.ctm);
+				  from_crtc_state->uapi.ctm);
 }
 
 /**
drivers/gpu/drm/i915/display/intel_atomic.h +2 -1
index 285de07011dc..62a3365ed5e6 100644
@@ -43,7 +43,8 @@ struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc *crtc);
 void intel_crtc_destroy_state(struct drm_crtc *crtc,
 			       struct drm_crtc_state *state);
 void intel_crtc_free_hw_state(struct intel_crtc_state *crtc_state);
-void intel_crtc_copy_color_blobs(struct intel_crtc_state *crtc_state);
+void intel_crtc_copy_color_blobs(struct intel_crtc_state *crtc_state,
+				 const struct intel_crtc_state *from_crtc_state);
 struct drm_atomic_state *intel_atomic_state_alloc(struct drm_device *dev);
 void intel_atomic_state_free(struct drm_atomic_state *state);
 void intel_atomic_state_clear(struct drm_atomic_state *state);
drivers/gpu/drm/i915/display/intel_display.c +13 -8
index 396ddcbb1520..962f15085a06 100644
@@ -13446,13 +13446,17 @@ static bool check_digital_port_conflicts(struct intel_atomic_state *state)
 }
 
 static void
-intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_crtc_state *crtc_state)
+intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_atomic_state *state,
+					   struct intel_crtc_state *crtc_state)
 {
-	intel_crtc_copy_color_blobs(crtc_state);
+	const struct intel_crtc_state *from_crtc_state = crtc_state;
+
+	intel_crtc_copy_color_blobs(crtc_state, from_crtc_state);
 }
 
 static void
-intel_crtc_copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)
+intel_crtc_copy_uapi_to_hw_state(struct intel_atomic_state *state,
+				 struct intel_crtc_state *crtc_state)
 {
 	crtc_state->hw.enable = crtc_state->uapi.enable;
 	crtc_state->hw.active = crtc_state->uapi.active;
@@ -13460,7 +13464,7 @@ intel_crtc_copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)
 	crtc_state->hw.pipe_mode = crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode;
 	crtc_state->hw.scaling_filter = crtc_state->uapi.scaling_filter;
 
-	intel_crtc_copy_uapi_to_hw_state_nomodeset(crtc_state);
+	intel_crtc_copy_uapi_to_hw_state_nomodeset(state, crtc_state);
 }
 
 static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state)
@@ -13483,7 +13487,8 @@ static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state
 }
 
 static int
-intel_crtc_prepare_cleared_state(struct intel_crtc_state *crtc_state)
+intel_crtc_prepare_cleared_state(struct intel_atomic_state *state,
+				 struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
@@ -13515,7 +13520,7 @@ intel_crtc_prepare_cleared_state(struct intel_crtc_state *crtc_state)
 	memcpy(crtc_state, saved_state, sizeof(*crtc_state));
 	kfree(saved_state);
 
-	intel_crtc_copy_uapi_to_hw_state(crtc_state);
+	intel_crtc_copy_uapi_to_hw_state(state, crtc_state);
 
 	return 0;
 }
@@ -15216,12 +15221,12 @@ static int intel_atomic_check(struct drm_device *dev,
 					    new_crtc_state, i) {
 		if (!needs_modeset(new_crtc_state)) {
 			/* Light copy */
-			intel_crtc_copy_uapi_to_hw_state_nomodeset(new_crtc_state);
+			intel_crtc_copy_uapi_to_hw_state_nomodeset(state, new_crtc_state);
 
 			continue;
 		}
 
-		ret = intel_crtc_prepare_cleared_state(new_crtc_state);
+		ret = intel_crtc_prepare_cleared_state(state, new_crtc_state);
 		if (ret)
 			goto fail;
 
Signature · 6 lines
2.19.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH v2 5/5 drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3.

In reply to Manasi Navare

From: Maarten Lankhorst <[email protected]>

Small changes to intel_dp_mode_valid(), allow listing modes that can only be supported in the bigjoiner configuration, which is not supported yet.

v12:
* slice_count logic simplify (Ville)
* Fix unnecessary changes in downstream_mode_valid (Ville) v11:
* Make intel_dp_can_bigjoiner non static
so it can be used in intel_display (Manasi)
v10:
* Simplify logic (Ville)
* Allow bigjoiner on edp (Ville)
v9:
* Restric Bigjoiner on PORT A (Ville)
v8:
* use source dotclock for max dotclock (Manasi)
v7:
* Add can_bigjoiner() helper (Ville)
* Pass bigjoiner to plane_size validation (Ville)
v6:
* Rebase after dp_downstream mode valid changes (Manasi) v5:
* Increase max plane width to support 8K with bigjoiner (Maarten) v4:
* Rebase (Manasi)

Changes since v1:
- Disallow bigjoiner on eDP.
Changes since v2:
- Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock, and split off the downstream and source checking to its own function. (Ville)
v3:
* Rebase (Manasi)

---
 drivers/gpu/drm/i915/display/intel_display.c |  5 +-
 drivers/gpu/drm/i915/display/intel_display.h |  3 +-
 drivers/gpu/drm/i915/display/intel_dp.c      | 77 ++++++++++++++++----
 drivers/gpu/drm/i915/display/intel_dp.h      |  1 +
 drivers/gpu/drm/i915/display/intel_dp_mst.c  |  2 +-
 drivers/gpu/drm/i915/display/intel_dsi.c     |  2 +-
 drivers/gpu/drm/i915/display/intel_hdmi.c    |  2 +-
 7 files changed, 72 insertions(+), 20 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +3 -2
index 962f15085a06..14bd64269a46 100644
@@ -17760,7 +17760,8 @@ intel_mode_valid(struct drm_device *dev,
 
 enum drm_mode_status
 intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
-				const struct drm_display_mode *mode)
+				const struct drm_display_mode *mode,
+				bool bigjoiner)
 {
 	int plane_width_max, plane_height_max;
 
@@ -17777,7 +17778,7 @@ intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
 	 * too big for that.
 	 */
 	if (INTEL_GEN(dev_priv) >= 11) {
-		plane_width_max = 5120;
+		plane_width_max = 5120 << bigjoiner;
 		plane_height_max = 4320;
 	} else {
 		plane_width_max = 5120;
drivers/gpu/drm/i915/display/intel_display.h +2 -1
index 1b946209e06b..4f8dee9dfb4d 100644
@@ -497,7 +497,8 @@ u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
 bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
 enum drm_mode_status
 intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
-				const struct drm_display_mode *mode);
+				const struct drm_display_mode *mode,
+				bool bigjoiner);
 enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
 bool is_trans_port_sync_mode(const struct intel_crtc_state *state);
 
drivers/gpu/drm/i915/display/intel_dp.c +63 -14

153 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_dp.h +1 -0
index 3f862b4fd34f..b871a09b6901 100644
@@ -106,6 +106,7 @@ bool intel_dp_source_supports_hbr3(struct intel_dp *intel_dp);
 bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp);
 int intel_dp_link_required(int pixel_clock, int bpp);
 int intel_dp_max_data_rate(int max_link_clock, int max_lanes);
+bool intel_dp_can_bigjoiner(struct intel_dp *intel_dp);
 bool intel_dp_needs_vsc_sdp(const struct intel_crtc_state *crtc_state,
 			    const struct drm_connector_state *conn_state);
 void intel_dp_compute_psr_vsc_sdp(struct intel_dp *intel_dp,
drivers/gpu/drm/i915/display/intel_dp_mst.c +1 -1
index c8fcec4d0788..0c8684634fca 100644
@@ -714,7 +714,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
 		return 0;
 	}
 
-	*status = intel_mode_valid_max_plane_size(dev_priv, mode);
+	*status = intel_mode_valid_max_plane_size(dev_priv, mode, false);
 	return 0;
 }
 
drivers/gpu/drm/i915/display/intel_dsi.c +1 -1
index afa4e6817e8c..f453ceb8d149 100644
@@ -75,7 +75,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
 			return MODE_CLOCK_HIGH;
 	}
 
-	return intel_mode_valid_max_plane_size(dev_priv, mode);
+	return intel_mode_valid_max_plane_size(dev_priv, mode, false);
 }
 
 struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
drivers/gpu/drm/i915/display/intel_hdmi.c +1 -1
index f90838bc74fb..82674a8853c6 100644
@@ -2274,7 +2274,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 	if (status != MODE_OK)
 		return status;
 
-	return intel_mode_valid_max_plane_size(dev_priv, mode);
+	return intel_mode_valid_max_plane_size(dev_priv, mode, false);
 }
 
 bool intel_hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
Signature · 6 lines
2.19.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [v2,1/5] drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes

In reply to Manasi Navare
== Series Details ==

== Series Details ==

Series: series starting with [v2,1/5] drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes
URL : https://patchwork.freedesktop.org/series/83118/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
10e42fe832c7 drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes
2ceb0c198f7f drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder split
-:10: WARNING:TYPO_SPELLING: 'halfs' may be misspelled - perhaps 'halves'?
#10: 
With bigjoiner, there will be 2 pipes driving 2 halfs of 1 transcoder,

-:141: CHECK:MULTIPLE_ASSIGNMENTS: multiple assignments should be avoided #141: FILE: drivers/gpu/drm/i915/display/intel_display.c:13460:
+ crtc_state->hw.pipe_mode = crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode;

total: 0 errors, 1 warnings, 1 checks, 357 lines checked 5e1144da1fea drm/i915: Pass intel_atomic_state instead of drm_atomic_state 9b263ae72e3f drm/i915/dp: Prep for bigjoiner atomic check 156703ae1a81 drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3.

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

[Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [v2,1/5] drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes

In reply to Manasi Navare
== Series Details ==

== Series Details ==

Series: series starting with [v2,1/5] drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes
URL : https://patchwork.freedesktop.org/series/83118/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_9206 -> Patchwork_18792
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_18792 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_18792, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_18792:

### IGT changes ###

#### Possible regressions ####

* igt@runner@aborted:
- fi-ilk-650: NOTRUN -> [FAIL][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-ilk-650/igt@[email protected]
- fi-pnv-d510: NOTRUN -> [FAIL][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-pnv-d510/igt@[email protected]
- fi-gdg-551: NOTRUN -> [FAIL][3]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-gdg-551/igt@[email protected]
- fi-snb-2520m: NOTRUN -> [FAIL][4]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-snb-2520m/igt@[email protected]
- fi-skl-lmem: NOTRUN -> [FAIL][5]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-skl-lmem/igt@[email protected]
- fi-bwr-2160: NOTRUN -> [FAIL][6]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-bwr-2160/igt@[email protected]
- fi-kbl-guc: NOTRUN -> [FAIL][7]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-kbl-guc/igt@[email protected]
- fi-snb-2600: NOTRUN -> [FAIL][8]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-snb-2600/igt@[email protected]
- fi-cml-u2: NOTRUN -> [FAIL][9]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-cml-u2/igt@[email protected]
- fi-ivb-3770: NOTRUN -> [FAIL][10]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-ivb-3770/igt@[email protected]
- fi-byt-j1900: NOTRUN -> [FAIL][11]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-byt-j1900/igt@[email protected]
- fi-elk-e7500: NOTRUN -> [FAIL][12]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-elk-e7500/igt@[email protected]
- fi-cml-s: NOTRUN -> [FAIL][13]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-cml-s/igt@[email protected]
- fi-skl-guc: NOTRUN -> [FAIL][14]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-skl-guc/igt@[email protected]
- fi-skl-6700k2: NOTRUN -> [FAIL][15]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-skl-6700k2/igt@[email protected]
- fi-blb-e6850: NOTRUN -> [FAIL][16]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-blb-e6850/igt@[email protected]

#### Warnings ####

* igt@runner@aborted:
- fi-skl-6600u: [FAIL][17] ([i915#1814]) -> [FAIL][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9206/fi-skl-6600u/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-skl-6600u/igt@[email protected]

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@runner@aborted:
- {fi-ehl-1}: NOTRUN -> [FAIL][19]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-ehl-1/igt@[email protected]

New tests
---------

New tests have been introduced between CI_DRM_9206 and Patchwork_18792:

### New CI tests (1) ###

* boot:
- Statuses : 41 pass(s)
- Exec time: [0.0] s

Known issues
------------

Here are the changes found in Patchwork_18792 that come from known issues:

### IGT changes ###

#### Warnings ####

* igt@runner@aborted:
- fi-icl-u2: [FAIL][20] ([i915#1814]) -> [FAIL][21] ([i915#1569] / [k.org#202973])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9206/fi-icl-u2/igt@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-icl-u2/igt@[email protected]
- fi-kbl-r: [FAIL][22] ([fdo#109271] / [i915#1784] / [i915#1814]) -> [FAIL][23] ([i915#1569] / [i915#192] / [i915#193] / [i915#194])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9206/fi-kbl-r/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/fi-kbl-r/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1569]: https://gitlab.freedesktop.org/drm/intel/issues/1569
[i915#1784]: https://gitlab.freedesktop.org/drm/intel/issues/1784
[i915#1814]: https://gitlab.freedesktop.org/drm/intel/issues/1814
[i915#192]: https://gitlab.freedesktop.org/drm/intel/issues/192
[i915#193]: https://gitlab.freedesktop.org/drm/intel/issues/193
[i915#194]: https://gitlab.freedesktop.org/drm/intel/issues/194
[k.org#202973]: https://bugzilla.kernel.org/show_bug.cgi?id=202973

Participating hosts (43 -> 41)
------------------------------

Missing (2): fi-bsw-cyan fi-bdw-samus

Build changes
-------------

* Linux: CI_DRM_9206 -> Patchwork_18792

CI-20190529: 20190529
CI_DRM_9206: 85ce674ff932ed7ca41aef52d8bb42c04fbe2171 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5827: 7fd7e3fb8b42eb4e62a4575f6edc5a048e5bec3d @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_18792: 156703ae1a818a3d868a20434592048d54e8786f @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

156703ae1a81 drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3. 9b263ae72e3f drm/i915/dp: Prep for bigjoiner atomic check
5e1144da1fea drm/i915: Pass intel_atomic_state instead of drm_atomic_state 2ceb0c198f7f drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder split 10e42fe832c7 drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18792/index.html

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx