Enhancements to Tegra194 PCIe driver
v2 cover Enhancements to Tegra194 PCIe driver
This series of patches do some enhancements and some bug fixes to the Tegra194 PCIe platform driver like
- Fixing Vendor-ID corruption
- Mapping DBI space correctly
- Updating DWC IP version
- Handling error conditions properly
V2;
* Addressed Rob's comments. Changed 'Strongly Ordered' to 'nGnRnE'
Vidya Sagar (4):
PCI: tegra: Fix ASPM-L1SS advertisement disable code
PCI: tegra: Map configuration space as nGnRnE
PCI: tegra: Set DesignWare IP version
PCI: tegra: Handle error conditions properly
drivers/pci/controller/dwc/pcie-tegra194.c | 62 +++++++++++----------- 1 file changed, 30 insertions(+), 32 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/4 PCI: tegra: Fix ASPM-L1SS advertisement disable code
If the absence of CLKREQ# signal is indicated by the absence of "supports-clkreq" in the device-tree node, current driver is disabling the advertisement of ASPM-L1 Sub-States *before* the ASPM-L1 Sub-States offset is correctly initialized. Since default value of the ASPM-L1SS offset is zero, this is causing the Vendor-ID wrongly programmed to 0x10d2 instead of Nvidia's 0x10de thereby the quirks applicable for Tegra194 are not being applied. This patch fixes this issue by refactoring the code that disables the ASPM-L1SS advertisement.
---
V2:
* None
drivers/pci/controller/dwc/pcie-tegra194.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/pci/controller/dwc/pcie-tegra194.c +6 -6
@@ -896,6 +896,12 @@ static void tegra_pcie_prepare_host(struct pcie_port *pp)init_host_aspm (pcie); +/* Disable ASPM-L1SS advertisement if there is no CLKREQ routing */ +if (!pcie->supports_clkreq) { +disable_aspm_l11 (pcie); +disable_aspm_l12 (pcie); + } + val =dw_pcie_readl_dbi (pci,GEN3_RELATED_OFF ); val &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL ;dw_pcie_writel_dbi (pci,GEN3_RELATED_OFF , val);
@@ -1400,12 +1406,6 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, pcie->pcie_cap_base =dw_pcie_find_capability (&pcie->pci,PCI_CAP_ID_EXP ); -/* Disable ASPM-L1SS advertisement as there is no CLKREQ routing */ -if (!pcie->supports_clkreq) { -disable_aspm_l11 (pcie); -disable_aspm_l12 (pcie); - } -return ret; fail_phy:
Signature · 1 line
2.17.1
PATCH v2 2/4 PCI: tegra: Map configuration space as nGnRnE
In reply to Vidya SagarAs specified in the comment for pci_remap_cfgspace() define in arch/arm64/include/asm/io.h file, PCIe configuration space should be mapped as nGnRnE. Hence changing to dev_pci_remap_cfgspace() from devm_ioremap_resource() for mapping DBI space as that is nothing but the root port's own configuration space.
---
V2:
* Changed 'Strongly Ordered' to 'nGnRnE'
drivers/pci/controller/dwc/pcie-tegra194.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/pci/controller/dwc/pcie-tegra194.c +3 -1
@@ -2108,7 +2108,9 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) } pcie->dbi_res = dbi_res; - pci->dbi_base =devm_ioremap_resource (dev, dbi_res); + pci->dbi_base =devm_pci_remap_cfgspace (dev, + dbi_res->start, +resource_size (dbi_res));if (IS_ERR (pci->dbi_base))return PTR_ERR (pci->dbi_base);
Signature · 1 line
2.17.1
PATCH v2 3/4 PCI: tegra: Set DesignWare IP version
In reply to Vidya SagarSet the DesignWare IP version for Tegra194 to 0x490A. This would be used by the DesigWare sub-system to do any version specific configuration (Ex:- TD bit programming for ECRC).
---
V2:
* None
drivers/pci/controller/dwc/pcie-tegra194.c | 1 + 1 file changed, 1 insertion(+)
drivers/pci/controller/dwc/pcie-tegra194.c +1 -0
@@ -2011,6 +2011,7 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) pci->ops = &tegra_dw_pcie_ops; pci->n_fts[0 ] =N_FTS_VAL ; pci->n_fts[1 ] =FTS_VAL ; + pci->version =0x490A ; pp = &pci->pp; pcie->dev = &pdev->dev;
Signature · 1 line
2.17.1
PATCH v2 4/4 PCI: tegra: Handle error conditions properly
In reply to Vidya SagarCurrently the driver checks for error value of different APIs during the uninitialization sequence. It just returns from there if there is any error observed for one of those calls. Comparatively it is better to continue the uninitialization sequence irrespective of whether some of them are returning error. That way, it is more closer to complete uninitialization. It also adds checking return value for error for a cleaner exit path.
---
V2:
* None
drivers/pci/controller/dwc/pcie-tegra194.c | 45 ++++++++++------------ 1 file changed, 20 insertions(+), 25 deletions(-)
drivers/pci/controller/dwc/pcie-tegra194.c +20 -25
@@ -1422,43 +1422,32 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,return ret; } -static int __deinit_controller (struct tegra_pcie_dw *pcie) +static void tegra_pcie_unconfig_controller (struct tegra_pcie_dw *pcie) {int ret; ret =reset_control_assert (pcie->core_rst); -if (ret) { -dev_err (pcie->dev,"Failed to assert \"core\" reset: %d\n" , - ret); -return ret; - } +if (ret) +dev_err (pcie->dev,"Failed to assert \"core\" reset: %d\n" , ret);tegra_pcie_disable_phy (pcie); ret =reset_control_assert (pcie->core_apb_rst); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to assert APB reset: %d\n" , ret); -return ret; - }clk_disable_unprepare (pcie->core_clk); ret =regulator_disable (pcie->pex_ctl_supply); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to disable regulator: %d\n" , ret); -return ret; - }tegra_pcie_disable_slot_regulators (pcie); ret =tegra_pcie_bpmp_set_ctrl_state (pcie, false); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to disable controller %d: %d\n" , pcie->cid, ret); -return ret; - } - -return ret; }static int tegra_pcie_init_controller (struct tegra_pcie_dw *pcie)
@@ -1482,7 +1471,8 @@ static int tegra_pcie_init_controller(struct tegra_pcie_dw *pcie)return 0 ; fail_host_init: -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); +return ret; }static int tegra_pcie_try_link_l2 (struct tegra_pcie_dw *pcie)
@@ -1551,13 +1541,12 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)appl_writel (pcie, data,APPL_PINMUX ); } -static int tegra_pcie_deinit_controller (struct tegra_pcie_dw *pcie) +static void tegra_pcie_deinit_controller (struct tegra_pcie_dw *pcie) {tegra_pcie_downstream_dev_to_D0 (pcie);dw_pcie_host_deinit (&pcie->pci.pp);tegra_pcie_dw_pme_turnoff (pcie); - -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); }static int tegra_pcie_config_rp (struct tegra_pcie_dw *pcie)
@@ -1590,7 +1579,11 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie) goto fail_pm_get_sync; } -tegra_pcie_init_controller (pcie); + ret =tegra_pcie_init_controller (pcie); +if (ret <0 ) { +dev_err (dev,"Failed to initialize controller: %d\n" , ret); + goto fail_pm_get_sync; + } pcie->link_state =tegra_pcie_dw_link_up (&pcie->pci);if (!pcie->link_state) {
@@ -2238,8 +2231,9 @@ static int tegra_pcie_dw_suspend_noirq(struct device *dev) PORT_LOGIC_MSI_CTRL_INT_0_EN);tegra_pcie_downstream_dev_to_D0 (pcie);tegra_pcie_dw_pme_turnoff (pcie); +tegra_pcie_unconfig_controller (pcie); -return __deinit_controller (pcie); +return 0 ; }static int tegra_pcie_dw_resume_noirq (struct device *dev)
@@ -2267,7 +2261,8 @@ static int tegra_pcie_dw_resume_noirq(struct device *dev)return 0 ; fail_host_init: -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); +return ret; }static int tegra_pcie_dw_resume_early (struct device *dev)
@@ -2305,7 +2300,7 @@ static void tegra_pcie_dw_shutdown(struct platform_device *pdev)disable_irq (pcie->pci.pp.msi_irq);tegra_pcie_dw_pme_turnoff (pcie); -__deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); }static const struct tegra_pcie_dw_of_data tegra_pcie_dw_rc_of_data = {
Signature · 1 line
2.17.1
Re: [PATCH V2 4/4] PCI: tegra: Handle error conditions properly
Hi Vidya,
Can you update the subject to replace "properly" with more details about what the patch is doing? "Properly" is really meaningless in usages like this -- nobody writes patches to do the *wrong* thing, so it goes without saying that every patch is intended to things "properly".
It would also help to have some context. My first thought was that "error conditions" referred to PCIe errors like completion timeouts, completer abort, etc.
Maybe something like:
PCI: tegra: Continue unconfig sequence even if parts fail
PCI: tegra: Return init error (not unconfig error) on init failure
Quoted 6 lines · Vidya Sagar
Currently the driver checks for error value of different APIs during the uninitialization sequence. It just returns from there if there is any error observed for one of those calls. Comparatively it is better to continue the uninitialization sequence irrespective of whether some of them are returning error. That way, it is more closer to complete uninitialization. It also adds checking return value for error for a cleaner exit path.
This paragraph uses "it" to refer to both "the driver" (second sentence) and "this patch" (last sentence). That's confusing. There's no reason to refer to "this patch" at all. I'd rather have "Add checking ..." than "It adds checking ..."
I think that last sentence must be referring to the tegra_pcie_init_controller() change to return the initialization error rather than the error from __deinit_controller(). That seems right, but should be a separate patch.
Quoted 134 lines
Signed-off-by Vidya Sagar <[email protected]>---
V2:
* Nonedrivers/pci/controller/dwc/pcie-tegra194.c | 45 ++++++++++------------ 1 file changed, 20 insertions(+), 25 deletions(-)drivers/pci/controller/dwc/pcie-tegra194.c +20
-25@@ -1422,43 +1422,32 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,return ret; } -static int __deinit_controller (struct tegra_pcie_dw *pcie) +static void tegra_pcie_unconfig_controller (struct tegra_pcie_dw *pcie) {int ret; ret =reset_control_assert (pcie->core_rst); -if (ret) { -dev_err (pcie->dev,"Failed to assert \"core\" reset: %d\n" , - ret); -return ret; - } +if (ret) +dev_err (pcie->dev,"Failed to assert \"core\" reset: %d\n" , ret);tegra_pcie_disable_phy (pcie); ret =reset_control_assert (pcie->core_apb_rst); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to assert APB reset: %d\n" , ret); -return ret; - }clk_disable_unprepare (pcie->core_clk); ret =regulator_disable (pcie->pex_ctl_supply); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to disable regulator: %d\n" , ret); -return ret; - }tegra_pcie_disable_slot_regulators (pcie); ret =tegra_pcie_bpmp_set_ctrl_state (pcie, false); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to disable controller %d: %d\n" , pcie->cid, ret); -return ret; - } - -return ret; }static int tegra_pcie_init_controller (struct tegra_pcie_dw *pcie)@@ -1482,7 +1471,8 @@ static int tegra_pcie_init_controller(struct tegra_pcie_dw *pcie)return 0 ; fail_host_init: -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); +return ret; }static int tegra_pcie_try_link_l2 (struct tegra_pcie_dw *pcie)@@ -1551,13 +1541,12 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)appl_writel (pcie, data,APPL_PINMUX ); } -static int tegra_pcie_deinit_controller (struct tegra_pcie_dw *pcie) +static void tegra_pcie_deinit_controller (struct tegra_pcie_dw *pcie) {tegra_pcie_downstream_dev_to_D0 (pcie);dw_pcie_host_deinit (&pcie->pci.pp);tegra_pcie_dw_pme_turnoff (pcie); - -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); }static int tegra_pcie_config_rp (struct tegra_pcie_dw *pcie)@@ -1590,7 +1579,11 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie) goto fail_pm_get_sync; } -tegra_pcie_init_controller (pcie); + ret =tegra_pcie_init_controller (pcie); +if (ret <0 ) { +dev_err (dev,"Failed to initialize controller: %d\n" , ret); + goto fail_pm_get_sync; + } pcie->link_state =tegra_pcie_dw_link_up (&pcie->pci);if (!pcie->link_state) {@@ -2238,8 +2231,9 @@ static int tegra_pcie_dw_suspend_noirq(struct device *dev) PORT_LOGIC_MSI_CTRL_INT_0_EN);tegra_pcie_downstream_dev_to_D0 (pcie);tegra_pcie_dw_pme_turnoff (pcie); +tegra_pcie_unconfig_controller (pcie); -return __deinit_controller (pcie); +return 0 ; }static int tegra_pcie_dw_resume_noirq (struct device *dev)@@ -2267,7 +2261,8 @@ static int tegra_pcie_dw_resume_noirq(struct device *dev)return 0 ; fail_host_init: -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); +return ret; }static int tegra_pcie_dw_resume_early (struct device *dev)@@ -2305,7 +2300,7 @@ static void tegra_pcie_dw_shutdown(struct platform_device *pdev)disable_irq (pcie->pci.pp.msi_irq);tegra_pcie_dw_pme_turnoff (pcie); -__deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); }static const struct tegra_pcie_dw_of_data tegra_pcie_dw_rc_of_data = {Signature · 1 line
2.17.1
Re: [PATCH V2 4/4] PCI: tegra: Handle error conditions properly
Quoted 11 lines · Bjorn Helgaas
External email: Use caution opening links or attachments
Hi Vidya,
Can you update the subject to replace "properly" with more details about what the patch is doing? "Properly" is really meaningless in usages like this -- nobody writes patches to do the *wrong* thing, so it goes without saying that every patch is intended to things "properly".
Quoted 7 lines
It would also help to have some context. My first thought was that "error conditions" referred to PCIe errors like completion timeouts, completer abort, etc.
Maybe something like:
PCI: tegra: Continue unconfig sequence even if parts fail
Thanks for reviewing the change.
Sure. I'll go with the above subject line.
Quoted 15 lines
PCI: tegra: Return init error (not unconfig error) on init failure
Quoted 6 lines · Vidya Sagar
Currently the driver checks for error value of different APIs during the uninitialization sequence. It just returns from there if there is any error observed for one of those calls. Comparatively it is better to continue the uninitialization sequence irrespective of whether some of them are returning error. That way, it is more closer to complete uninitialization. It also adds checking return value for error for a cleaner exit path.
This paragraph uses "it" to refer to both "the driver" (second sentence) and "this patch" (last sentence). That's confusing. There's no reason to refer to "this patch" at all. I'd rather have "Add checking ..." than "It adds checking ..."
Quoted 4 lines
I think that last sentence must be referring to the
tegra_pcie_init_controller()change to return the initialization error rather than the error from__deinit_controller(). That seems right, but should be a separate patch.
Sure. I'll push a new patch for this.
Quoted 135 lines
Quoted 135 lines
Signed-off-by Vidya Sagar <[email protected]>---
V2:
* Nonedrivers/pci/controller/dwc/pcie-tegra194.c | 45 ++++++++++------------ 1 file changed, 20 insertions(+), 25 deletions(-)drivers/pci/controller/dwc/pcie-tegra194.c +20
-26@@ -1422,43 +1422,32 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,return ret; } -static int __deinit_controller (struct tegra_pcie_dw *pcie) +static void tegra_pcie_unconfig_controller (struct tegra_pcie_dw *pcie) {int ret; ret =reset_control_assert (pcie->core_rst); -if (ret) { -dev_err (pcie->dev,"Failed to assert \"core\" reset: %d\n" , - ret); -return ret; - } +if (ret) +dev_err (pcie->dev,"Failed to assert \"core\" reset: %d\n" , ret);tegra_pcie_disable_phy (pcie); ret =reset_control_assert (pcie->core_apb_rst); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to assert APB reset: %d\n" , ret); -return ret; - }clk_disable_unprepare (pcie->core_clk); ret =regulator_disable (pcie->pex_ctl_supply); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to disable regulator: %d\n" , ret); -return ret; - }tegra_pcie_disable_slot_regulators (pcie); ret =tegra_pcie_bpmp_set_ctrl_state (pcie, false); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to disable controller %d: %d\n" , pcie->cid, ret); -return ret; - } - -return ret; }static int tegra_pcie_init_controller (struct tegra_pcie_dw *pcie)@@ -1482,7 +1471,8 @@ static int tegra_pcie_init_controller(struct tegra_pcie_dw *pcie)return 0 ; fail_host_init: -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); +return ret; }static int tegra_pcie_try_link_l2 (struct tegra_pcie_dw *pcie)@@ -1551,13 +1541,12 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)appl_writel (pcie, data,APPL_PINMUX ); } -static int tegra_pcie_deinit_controller (struct tegra_pcie_dw *pcie) +static void tegra_pcie_deinit_controller (struct tegra_pcie_dw *pcie) {tegra_pcie_downstream_dev_to_D0 (pcie);dw_pcie_host_deinit (&pcie->pci.pp);tegra_pcie_dw_pme_turnoff (pcie); - -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); }static int tegra_pcie_config_rp (struct tegra_pcie_dw *pcie)@@ -1590,7 +1579,11 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie) goto fail_pm_get_sync; } -tegra_pcie_init_controller (pcie); + ret =tegra_pcie_init_controller (pcie); +if (ret <0 ) { +dev_err (dev,"Failed to initialize controller: %d\n" , ret); + goto fail_pm_get_sync; + } pcie->link_state =tegra_pcie_dw_link_up (&pcie->pci);if (!pcie->link_state) {@@ -2238,8 +2231,9 @@ static int tegra_pcie_dw_suspend_noirq(struct device *dev) PORT_LOGIC_MSI_CTRL_INT_0_EN);tegra_pcie_downstream_dev_to_D0 (pcie);tegra_pcie_dw_pme_turnoff (pcie); +tegra_pcie_unconfig_controller (pcie); -return __deinit_controller (pcie); +return 0 ; }static int tegra_pcie_dw_resume_noirq (struct device *dev)@@ -2267,7 +2261,8 @@ static int tegra_pcie_dw_resume_noirq(struct device *dev)return 0 ; fail_host_init: -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); +return ret; }static int tegra_pcie_dw_resume_early (struct device *dev)@@ -2305,7 +2300,7 @@ static void tegra_pcie_dw_shutdown(struct platform_device *pdev)disable_irq (pcie->pci.pp.msi_irq);tegra_pcie_dw_pme_turnoff (pcie); -__deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); }static const struct tegra_pcie_dw_of_data tegra_pcie_dw_rc_of_data = { --2.17.1