Skip to contentSkip to conversation

kvm: arm64: Always-on nVHE hypervisor

RFC PATCH In review David Brazdil 3 participants 35 messages Nov 4, 2020 – Nov 6, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover kvm: arm64: Always-on nVHE hypervisor

As we progress towards being able to keep guest state private to the host running nVHE hypervisor, this series allows the hypervisor to install itself on newly booted CPUs before the host is allowed to run on them.

To this end, the hypervisor starts trapping host SMCs and intercepting host's PSCI CPU_ON/OFF/SUSPEND calls. It replaces the host's entry point with its own, initializes the EL2 state of the new CPU and installs the nVHE hyp vector before ERETing to the host's entry point.

Other PSCI SMCs are forwarded to EL3, though only the known set of SMCs implemented in the kernel is allowed. Non-PSCI SMCs are also forwarded to EL3. Future changes will need to ensure the safety of all SMCs wrt. private guests.

The host is still allowed to reset EL2 back to the stub vector, eg. for hibernation or kexec, but will not disable nVHE when there are no VMs.

Tested on Rock Pi 4b.

Sending this as an RFC to get feedback on the following decisions:

1) The kernel checks new cores' features against the finalized system capabilities. To avoid the need to move this code/data to EL2, the implementation only allows to boot cores that were online at the time of KVM initialization.

2) Trapping and forwarding SMCs cannot be switched off. This could cause issues eg. if EL3 always returned to EL1. A kernel command line flag may be needed to turn the feature off on such platforms.

-David

David Brazdil (25):
psci: Export configured PSCI version
psci: Export configured PSCI function IDs
psci: Export psci_cpu_suspend_feature
arm64: Move MAIR_EL1_SET to asm/memory.h
kvm: arm64: Initialize MAIR_EL2 using a constant
kvm: arm64: Add .hyp.data ELF section
kvm: arm64: Support per_cpu_ptr in nVHE hyp code
kvm: arm64: Create nVHE copy of cpu_logical_map
kvm: arm64: Move hyp-init params to a per-CPU struct
kvm: arm64: Refactor handle_trap to use a switch
kvm: arm64: Extract parts of el2_setup into a macro
kvm: arm64: Add SMC handler in nVHE EL2
kvm: arm64: Bootstrap PSCI SMC handler in nVHE EL2
kvm: arm64: Forward safe PSCI SMCs coming from host
kvm: arm64: Add offset for hyp VA <-> PA conversion
kvm: arm64: Bootstrap PSCI power state of host CPUs
kvm: arm64: Intercept PSCI_CPU_OFF host SMC calls
kvm: arm64: Extract __do_hyp_init into a helper function
kvm: arm64: Add CPU entry point in nVHE hyp
kvm: arm64: Add function to enter host from KVM nVHE hyp code
kvm: arm64: Intercept PSCI_CPU_ON host SMC calls
kvm: arm64: Intercept host's CPU_SUSPEND PSCI SMCs
kvm: arm64: Keep nVHE EL2 vector installed
kvm: arm64: Trap host SMCs
kvm: arm64: Fix EL2 mode availability checks

Will Deacon (1):
arm64: kvm: Add standalone ticket spinlock implementation for use at
hyp

 arch/arm64/include/asm/kvm_arm.h           |   3 +-
 arch/arm64/include/asm/kvm_asm.h           | 142 +++++++++
 arch/arm64/include/asm/kvm_hyp.h           |  10 +
 arch/arm64/include/asm/memory.h            |  13 +
 arch/arm64/include/asm/percpu.h            |   6 +
 arch/arm64/include/asm/sections.h          |   1 +
 arch/arm64/include/asm/virt.h              |  16 +
 arch/arm64/kernel/asm-offsets.c            |   5 +
 arch/arm64/kernel/head.S                   | 140 +--------
 arch/arm64/kernel/image-vars.h             |   3 +
 arch/arm64/kernel/vmlinux.lds.S            |  10 +
 arch/arm64/kvm/arm.c                       | 109 ++++++-
 arch/arm64/kvm/hyp/include/nvhe/spinlock.h |  96 ++++++
 arch/arm64/kvm/hyp/nvhe/Makefile           |   3 +-
 arch/arm64/kvm/hyp/nvhe/host.S             |   9 +
 arch/arm64/kvm/hyp/nvhe/hyp-init.S         |  82 ++++-
 arch/arm64/kvm/hyp/nvhe/hyp-main.c         |  57 +++-
 arch/arm64/kvm/hyp/nvhe/hyp.lds.S          |   3 +
 arch/arm64/kvm/hyp/nvhe/percpu.c           |  38 +++
 arch/arm64/kvm/hyp/nvhe/psci.c             | 333 +++++++++++++++++++++
 arch/arm64/mm/proc.S                       |  13 -
 drivers/firmware/psci/psci.c               |  27 +-
 include/linux/psci.h                       |  20 ++
 include/uapi/linux/psci.h                  |   8 +
 24 files changed, 948 insertions(+), 199 deletions(-)
 create mode 100644 arch/arm64/kvm/hyp/include/nvhe/spinlock.h
 create mode 100644 arch/arm64/kvm/hyp/nvhe/percpu.c
 create mode 100644 arch/arm64/kvm/hyp/nvhe/psci.c

--
2.29.1.341.ge80a0c044ae-goog

#1 lore raw

RFC PATCH 1/26 psci: Export configured PSCI version

The version of PSCI that the kernel should use to communicate with firmware is typically obtained from probing PSCI_VERSION. However, that doesn't work for PSCI v0.1 where the host gets the information from DT/ACPI, or if PSCI is not supported / was disabled.

KVM's PSCI proxy for the host needs to be configured with the same version used by the host driver. Expose the PSCI version used by the host.

---
 drivers/firmware/psci/psci.c | 6 ++++++
 include/linux/psci.h         | 8 ++++++++
 2 files changed, 14 insertions(+)
drivers/firmware/psci/psci.c +6 -0
index 00af99b6f97c..ff523bdbfe3f 100644
@@ -49,6 +49,8 @@ static int resident_cpu = -1;
 struct psci_operations psci_ops;
 static enum arm_smccc_conduit psci_conduit = SMCCC_CONDUIT_NONE;
 
+int psci_driver_version = PSCI_VERSION(0, 0);
+
 bool psci_tos_resident_on(int cpu)
 {
 	return cpu == resident_cpu;
@@ -461,6 +463,8 @@ static int __init psci_probe(void)
 		return -EINVAL;
 	}
 
+	psci_driver_version = ver;
+
 	psci_0_2_set_functions();
 
 	psci_init_migrate();
@@ -514,6 +518,8 @@ static int __init psci_0_1_init(struct device_node *np)
 
 	pr_info("Using PSCI v0.1 Function IDs from DT\n");
 
+	psci_driver_version = PSCI_VERSION(0, 1);
+
 	if (!of_property_read_u32(np, "cpu_suspend", &id)) {
 		psci_function_id[PSCI_FN_CPU_SUSPEND] = id;
 		psci_ops.cpu_suspend = psci_cpu_suspend;
include/linux/psci.h +8 -0
index 2a1bfb890e58..cb35b90d1746 100644
@@ -21,6 +21,14 @@ bool psci_power_state_is_valid(u32 state);
 int psci_set_osi_mode(bool enable);
 bool psci_has_osi_support(void);
 
+/**
+ * The version of the PSCI specification followed by the driver.
+ * This is equivalent to calling PSCI_VERSION except:
+ *   (a) it also works for PSCI v0.1, which does not support PSCI_VERSION, and
+ *   (b) it is set to v0.0 if the PSCI driver was not initialized.
+ */
+extern int psci_driver_version;
+
 struct psci_operations {
 	u32 (*get_version)(void);
 	int (*cpu_suspend)(u32 state, unsigned long entry_point);
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
maintainer
#2 lore raw

Re: [RFC PATCH 01/26] psci: Export configured PSCI version

Quoted 62 lines · David Brazdil

The version of PSCI that the kernel should use to communicate with firmware is typically obtained from probing PSCI_VERSION. However, that doesn't work for PSCI v0.1 where the host gets the information from DT/ACPI, or if PSCI is not supported / was disabled.

KVM's PSCI proxy for the host needs to be configured with the same version used by the host driver. Expose the PSCI version used by the host.

---
 drivers/firmware/psci/psci.c | 6 ++++++
 include/linux/psci.h         | 8 ++++++++
 2 files changed, 14 insertions(+)
drivers/firmware/psci/psci.c +6 -0
index 00af99b6f97c..ff523bdbfe3f 100644
@@ -49,6 +49,8 @@ static int resident_cpu = -1;
 struct psci_operations psci_ops;
 static enum arm_smccc_conduit psci_conduit = SMCCC_CONDUIT_NONE;
 
+int psci_driver_version = PSCI_VERSION(0, 0);
+
 bool psci_tos_resident_on(int cpu)
 {
 	return cpu == resident_cpu;
@@ -461,6 +463,8 @@ static int __init psci_probe(void)
 		return -EINVAL;
 	}
 
+	psci_driver_version = ver;
+
 	psci_0_2_set_functions();
 
 	psci_init_migrate();
@@ -514,6 +518,8 @@ static int __init psci_0_1_init(struct device_node 
 *np)
 
 	pr_info("Using PSCI v0.1 Function IDs from DT\n");
 
+	psci_driver_version = PSCI_VERSION(0, 1);
+
 	if (!of_property_read_u32(np, "cpu_suspend", &id)) {
 		psci_function_id[PSCI_FN_CPU_SUSPEND] = id;
drivers/firmware/psci/psci.c +0 -0
 		psci_ops.cpu_suspend = psci_cpu_suspend;
include/linux/psci.h +4 -0
index 2a1bfb890e58..cb35b90d1746 100644
@@ -21,6 +21,14 @@ bool psci_power_state_is_valid(u32 state);
 int psci_set_osi_mode(bool enable);
 bool psci_has_osi_support(void);
 
+/**
+ * The version of the PSCI specification followed by the driver.
+ * This is equivalent to calling PSCI_VERSION except:
+ *   (a) it also works for PSCI v0.1, which does not support 

PSCI_VERSION, and
+ * (b) it is set to v0.0 if the PSCI driver was not initialized.
+ */

include/linux/psci.h

Quoted 5 lines
include/linux/psci.h +2 -0
+extern int psci_driver_version;
+
 struct psci_operations {
 	u32 (*get_version)(void);
 	int (*cpu_suspend)(u32 state, unsigned long entry_point);

How about providing a get_version callback for pre-0.2 implementations instead? This would avoid exposing more symbols (psci_ops is already global).

Thanks,

        M.
drivers/firmware/psci/psci.c +7 -0
index 00af99b6f97c..b84454e12d92 100644
@@ -500,6 +500,11 @@ static int __init psci_0_2_init(struct device_node *np)
 	return psci_probe();
 }
 
+static u32 psci_0_1_get_version(void)
+{
+	return PSCI_VERSION(0, 1);
+}
+
 /*
  * PSCI < v0.2 get PSCI Function IDs via DT.
  */
@@ -514,6 +519,8 @@ static int __init psci_0_1_init(struct device_node *np)
 
 	pr_info("Using PSCI v0.1 Function IDs from DT\n");
 
+	psci_ops.get_version = psci_0_1_get_version;
+
 	if (!of_property_read_u32(np, "cpu_suspend", &id)) {
 		psci_function_id[PSCI_FN_CPU_SUSPEND] = id;
 		psci_ops.cpu_suspend = psci_cpu_suspend;
Signature · 1 line
Jazz is not dead. It just smells funny...
#3 lore raw

RFC PATCH 2/26 psci: Export configured PSCI function IDs

In reply to David Brazdil

Function IDs used by PSCI are configurable for v0.1 via DT/APCI. If the host is using PSCI v0.1, KVM's PSCI proxy needs to use the same IDs. Expose the array holding the information.

---
 drivers/firmware/psci/psci.c | 10 +---------
 include/linux/psci.h         | 10 ++++++++++
 2 files changed, 11 insertions(+), 9 deletions(-)
drivers/firmware/psci/psci.c +1 -9
index ff523bdbfe3f..ffcb88f60e21 100644
@@ -60,15 +60,7 @@ typedef unsigned long (psci_fn)(unsigned long, unsigned long,
 				unsigned long, unsigned long);
 static psci_fn *invoke_psci_fn;
 
-enum psci_function {
-	PSCI_FN_CPU_SUSPEND,
-	PSCI_FN_CPU_ON,
-	PSCI_FN_CPU_OFF,
-	PSCI_FN_MIGRATE,
-	PSCI_FN_MAX,
-};
-
-static u32 psci_function_id[PSCI_FN_MAX];
+u32 psci_function_id[PSCI_FN_MAX];
 
 #define PSCI_0_2_POWER_STATE_MASK		\
 				(PSCI_0_2_POWER_STATE_ID_MASK | \
include/linux/psci.h +10 -0
index cb35b90d1746..877d844ee6d9 100644
@@ -29,6 +29,16 @@ bool psci_has_osi_support(void);
  */
 extern int psci_driver_version;
 
+enum psci_function {
+	PSCI_FN_CPU_SUSPEND,
+	PSCI_FN_CPU_ON,
+	PSCI_FN_CPU_OFF,
+	PSCI_FN_MIGRATE,
+	PSCI_FN_MAX,
+};
+
+extern u32 psci_function_id[PSCI_FN_MAX];
+
 struct psci_operations {
 	u32 (*get_version)(void);
 	int (*cpu_suspend)(u32 state, unsigned long entry_point);
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
maintainer
#4 lore raw

Re: [RFC PATCH 02/26] psci: Export configured PSCI function IDs

Quoted 39 lines · David Brazdil

Function IDs used by PSCI are configurable for v0.1 via DT/APCI. If the host is using PSCI v0.1, KVM's PSCI proxy needs to use the same IDs. Expose the array holding the information.

---
 drivers/firmware/psci/psci.c | 10 +---------
 include/linux/psci.h         | 10 ++++++++++
 2 files changed, 11 insertions(+), 9 deletions(-)
drivers/firmware/psci/psci.c +1 -9
index ff523bdbfe3f..ffcb88f60e21 100644
@@ -60,15 +60,7 @@ typedef unsigned long (psci_fn)(unsigned long, 
 unsigned long,
 				unsigned long, unsigned long);
 static psci_fn *invoke_psci_fn;
 
-enum psci_function {
-	PSCI_FN_CPU_SUSPEND,
-	PSCI_FN_CPU_ON,
-	PSCI_FN_CPU_OFF,
-	PSCI_FN_MIGRATE,
-	PSCI_FN_MAX,
-};
-
-static u32 psci_function_id[PSCI_FN_MAX];
+u32 psci_function_id[PSCI_FN_MAX];
 
 #define PSCI_0_2_POWER_STATE_MASK		\
drivers/firmware/psci/psci.c +0 -0
 				(PSCI_0_2_POWER_STATE_ID_MASK | \
include/linux/psci.h +0 -0
index cb35b90d1746..877d844ee6d9 100644
@@ -29,6 +29,16 @@ bool psci_has_osi_support(void);
  */
 extern int psci_driver_version;

include/linux/psci.h bool psci_has_osi_support(void); · line 40

Quoted 10 lines
include/linux/psci.h +9 -0
 
+enum psci_function {
+	PSCI_FN_CPU_SUSPEND,
+	PSCI_FN_CPU_ON,
+	PSCI_FN_CPU_OFF,
+	PSCI_FN_MIGRATE,
+	PSCI_FN_MAX,
+};
+
+extern u32 psci_function_id[PSCI_FN_MAX];

I am very reluctant to expose this array to the rest of the kernel. The temptation becomes huge for people to start writing to it from random drivers in order to route PSCI calls somewhere else. Consider exporting an accessor instead.

Same thing for the following patch (there already are a couple of accessors for psci_cpu_suspend_feature, which you could make visible).

Thanks,

        M.
Signature · 1 line
Jazz is not dead. It just smells funny...
#5 lore raw

RFC PATCH 3/26 psci: Export psci_cpu_suspend_feature

In reply to David Brazdil

KVM's PSCI proxy could probe the firmware to establish features supported for CPU_SUSPEND, but since the kernel's PSCI driver already does that, and other information about the driver is already exported, export the value of psci_cpu_suspend_feature as well for convenience.

---
 drivers/firmware/psci/psci.c | 2 +-
 include/linux/psci.h         | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/firmware/psci/psci.c +1 -1
index ffcb88f60e21..b6ad237b1518 100644
@@ -71,7 +71,7 @@ u32 psci_function_id[PSCI_FN_MAX];
 				(PSCI_1_0_EXT_POWER_STATE_ID_MASK | \
 				PSCI_1_0_EXT_POWER_STATE_TYPE_MASK)
 
-static u32 psci_cpu_suspend_feature;
+u32 psci_cpu_suspend_feature;
 static bool psci_system_reset2_supported;
 
 static inline bool psci_has_ext_power_state(void)
include/linux/psci.h +2 -0
index 877d844ee6d9..a5832d91d493 100644
@@ -29,6 +29,8 @@ bool psci_has_osi_support(void);
  */
 extern int psci_driver_version;
 
+extern u32 psci_cpu_suspend_feature;
+
 enum psci_function {
 	PSCI_FN_CPU_SUSPEND,
 	PSCI_FN_CPU_ON,
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#6 lore raw

RFC PATCH 4/26 arm64: Move MAIR_EL1_SET to asm/memory.h

In reply to David Brazdil

KVM currently initializes MAIR_EL2 to the value of MAIR_EL1. In preparation for initializing MAIR_EL2 before MAIR_EL1, move the constant into a shared header file.

---
 arch/arm64/include/asm/memory.h | 13 +++++++++++++
 arch/arm64/mm/proc.S            | 13 -------------
 2 files changed, 13 insertions(+), 13 deletions(-)
arch/arm64/include/asm/memory.h +13 -0
index cd61239bae8c..aca00737e771 100644
@@ -152,6 +152,19 @@
 #define MT_S2_FWB_NORMAL	6
 #define MT_S2_FWB_DEVICE_nGnRE	1
 
+/*
+ * Default MAIR_EL1. MT_NORMAL_TAGGED is initially mapped as Normal memory and
+ * changed during __cpu_setup to Normal Tagged if the system supports MTE.
+ */
+#define MAIR_EL1_SET							\
+	(MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRnE, MT_DEVICE_nGnRnE) |	\
+	 MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRE, MT_DEVICE_nGnRE) |	\
+	 MAIR_ATTRIDX(MAIR_ATTR_DEVICE_GRE, MT_DEVICE_GRE) |		\
+	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL_NC, MT_NORMAL_NC) |		\
+	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL) |			\
+	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL_WT, MT_NORMAL_WT) |		\
+	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL_TAGGED))
+
 #ifdef CONFIG_ARM64_4K_PAGES
 #define IOREMAP_MAX_ORDER	(PUD_SHIFT)
 #else
arch/arm64/mm/proc.S +0 -13
index 23c326a06b2d..25ff21b3a1c6 100644
@@ -45,19 +45,6 @@
 #define TCR_KASAN_FLAGS 0
 #endif
 
-/*
- * Default MAIR_EL1. MT_NORMAL_TAGGED is initially mapped as Normal memory and
- * changed during __cpu_setup to Normal Tagged if the system supports MTE.
- */
-#define MAIR_EL1_SET							\
-	(MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRnE, MT_DEVICE_nGnRnE) |	\
-	 MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRE, MT_DEVICE_nGnRE) |	\
-	 MAIR_ATTRIDX(MAIR_ATTR_DEVICE_GRE, MT_DEVICE_GRE) |		\
-	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL_NC, MT_NORMAL_NC) |		\
-	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL) |			\
-	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL_WT, MT_NORMAL_WT) |		\
-	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL_TAGGED))
-
 #ifdef CONFIG_CPU_PM
 /**
  * cpu_do_suspend - save CPU registers context
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#7 lore raw

RFC PATCH 5/26 kvm: arm64: Initialize MAIR_EL2 using a constant

In reply to David Brazdil

MAIR_EL2 is currently initialized to the value of MAIR_EL1, which itself is set to a constant MAIR_EL1_SET.

Initialize MAIR_EL2 to the MAIR_EL1_SET constant directly in preparation of allowing KVM to start CPU cores itself and not initializing itself before ERETing to EL1. In that case, MAIR_EL2 will be initialized before MAIR_EL1.

---
 arch/arm64/kvm/hyp/nvhe/hyp-init.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kvm/hyp/nvhe/hyp-init.S +1 -1
index b11a9d7db677..96e70f976ff5 100644
@@ -111,7 +111,7 @@ alternative_else_nop_endif
 
 	msr	tcr_el2, x0
 
-	mrs	x0, mair_el1
+	mov_q	x0, MAIR_EL1_SET
 	msr	mair_el2, x0
 	isb
 
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#8 lore raw

RFC PATCH 6/26 kvm: arm64: Add .hyp.data ELF section

In reply to David Brazdil

Add rules for renaming a .data ELF section in KVM nVHE object files to .hyp.data, linking it into the kernel and mapping it in hyp at runtime.

---
 arch/arm64/include/asm/sections.h |  1 +
 arch/arm64/kernel/vmlinux.lds.S   | 10 ++++++++++
 arch/arm64/kvm/arm.c              |  7 +++++++
 arch/arm64/kvm/hyp/nvhe/hyp.lds.S |  3 +++
 4 files changed, 21 insertions(+)
arch/arm64/include/asm/sections.h +1 -0
index 3994169985ef..255f76f592d7 100644
@@ -11,6 +11,7 @@ extern char __alt_instructions[], __alt_instructions_end[];
 extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[];
 extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
 extern char __hyp_text_start[], __hyp_text_end[];
+extern char __hyp_data_start[], __hyp_data_end[];
 extern char __idmap_text_start[], __idmap_text_end[];
 extern char __initdata_begin[], __initdata_end[];
 extern char __inittext_begin[], __inittext_end[];
arch/arm64/kernel/vmlinux.lds.S +10 -0
index 1bda604f4c70..a9a1612c084f 100644
@@ -30,6 +30,13 @@ jiffies = jiffies_64;
 	*(__kvm_ex_table)					\
 	__stop___kvm_ex_table = .;
 
+#define HYPERVISOR_DATA_SECTION					\
+	HYP_SECTION_NAME(.data) : {				\
+		__hyp_data_start = .;				\
+		*(HYP_SECTION_NAME(.data))			\
+		__hyp_data_end = .;				\
+	}
+
 #define HYPERVISOR_PERCPU_SECTION				\
 	. = ALIGN(PAGE_SIZE);					\
 	HYP_SECTION_NAME(.data..percpu) : {			\
@@ -37,6 +44,7 @@ jiffies = jiffies_64;
 	}
 #else /* CONFIG_KVM */
 #define HYPERVISOR_EXTABLE
+#define HYPERVISOR_DATA_SECTION
 #define HYPERVISOR_PERCPU_SECTION
 #endif
 
@@ -207,6 +215,8 @@ SECTIONS
 		EXIT_DATA
 	}
 
+	HYPERVISOR_DATA_SECTION
+
 	PERCPU_SECTION(L1_CACHE_BYTES)
 	HYPERVISOR_PERCPU_SECTION
 
arch/arm64/kvm/arm.c +7 -0
index 5750ec34960e..8bb9fffe2a8f 100644
@@ -1602,6 +1602,13 @@ static int init_hyp_mode(void)
 		goto out_err;
 	}
 
+	err = create_hyp_mappings(kvm_ksym_ref(__hyp_data_start),
+				  kvm_ksym_ref(__hyp_data_end), PAGE_HYP);
+	if (err) {
+		kvm_err("Cannot map hyp data section\n");
+		goto out_err;
+	}
+
 	err = create_hyp_mappings(kvm_ksym_ref(__start_rodata),
 				  kvm_ksym_ref(__end_rodata), PAGE_HYP_RO);
 	if (err) {
arch/arm64/kvm/hyp/nvhe/hyp.lds.S +3 -0
index bb2d986ff696..bc1664d365a9 100644
@@ -16,4 +16,7 @@ SECTIONS {
 	HYP_SECTION_NAME(.data..percpu) : {
 		PERCPU_INPUT(L1_CACHE_BYTES)
 	}
+
+	/* Put after '.data..percpu' because its name matches the same regex. */
+	HYP_SECTION(.data)
 }
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#9 lore raw

RFC PATCH 7/26 kvm: arm64: Support per_cpu_ptr in nVHE hyp code

In reply to David Brazdil

When compiling with __KVM_NVHE_HYPERVISOR__ redefine per_cpu_offset() to __hyp_per_cpu_offset() which looks up the base of the nVHE per-CPU region of the given cpu and computes its offset from the .hyp.data..percpu section.

This enables use of per_cpu_ptr() helpers in nVHE hyp code. Until now only this_cpu_ptr() was supported by setting TPIDR_EL2.

---
 arch/arm64/include/asm/percpu.h  |  6 ++++++
 arch/arm64/kernel/image-vars.h   |  3 +++
 arch/arm64/kvm/hyp/nvhe/Makefile |  3 ++-
 arch/arm64/kvm/hyp/nvhe/percpu.c | 22 ++++++++++++++++++++++
 4 files changed, 33 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/kvm/hyp/nvhe/percpu.c
arch/arm64/include/asm/percpu.h +6 -0
index 1599e17379d8..8f1661603b78 100644
@@ -239,6 +239,12 @@ PERCPU_RET_OP(add, add, ldadd)
 #define this_cpu_cmpxchg_8(pcp, o, n)	\
 	_pcp_protect_return(cmpxchg_relaxed, pcp, o, n)
 
+#ifdef __KVM_NVHE_HYPERVISOR__
+extern unsigned long __hyp_per_cpu_offset(unsigned int cpu);
+#define __per_cpu_offset
+#define per_cpu_offset(cpu)	__hyp_per_cpu_offset((cpu))
+#endif
+
 #include <asm-generic/percpu.h>
 
 /* Redefine macros for nVHE hyp under DEBUG_PREEMPT to avoid its dependencies. */
arch/arm64/kernel/image-vars.h +3 -0
index c615b285ff5b..78a42a7cdb72 100644
@@ -103,6 +103,9 @@ KVM_NVHE_ALIAS(gic_nonsecure_priorities);
 KVM_NVHE_ALIAS(__start___kvm_ex_table);
 KVM_NVHE_ALIAS(__stop___kvm_ex_table);
 
+/* Array containing bases of nVHE per-CPU memory regions. */
+KVM_NVHE_ALIAS(kvm_arm_hyp_percpu_base);
+
 #endif /* CONFIG_KVM */
 
 #endif /* __ARM64_KERNEL_IMAGE_VARS_H */
arch/arm64/kvm/hyp/nvhe/Makefile +2 -1
index ddde15fe85f2..c45f440cce51 100644
@@ -6,7 +6,8 @@
 asflags-y := -D__KVM_NVHE_HYPERVISOR__
 ccflags-y := -D__KVM_NVHE_HYPERVISOR__
 
-obj-y := timer-sr.o sysreg-sr.o debug-sr.o switch.o tlb.o hyp-init.o host.o hyp-main.o
+obj-y := timer-sr.o sysreg-sr.o debug-sr.o switch.o tlb.o hyp-init.o host.o \
+	 hyp-main.o percpu.o
 obj-y += ../vgic-v3-sr.o ../aarch32.o ../vgic-v2-cpuif-proxy.o ../entry.o \
 	 ../fpsimd.o ../hyp-entry.o
 
arch/arm64/kvm/hyp/nvhe/percpu.c new file +22 -0
new file mode 100644
index 000000000000..5fd0c5696907
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 - Google LLC
+ * Author: David Brazdil <[email protected]>
+ */
+
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+unsigned long __hyp_per_cpu_offset(unsigned int cpu)
+{
+	unsigned long *cpu_base_array;
+	unsigned long this_cpu_base;
+
+	if (cpu >= ARRAY_SIZE(kvm_arm_hyp_percpu_base))
+		hyp_panic();
+
+	cpu_base_array = kern_hyp_va(&kvm_arm_hyp_percpu_base[0]);
+	this_cpu_base = kern_hyp_va(cpu_base_array[cpu]);
+	return this_cpu_base - (unsigned long)&__per_cpu_start;
+}
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#10 lore raw

RFC PATCH 8/26 kvm: arm64: Create nVHE copy of cpu_logical_map

In reply to David Brazdil

When KVM starts validating host's PSCI requests, it will need to map MPIDR back to the CPU ID. To this end, copy cpu_logical_map into nVHE hyp memory when KVM is initialized.

Only copy the information for CPUs that are online at the point of KVM initialization so that KVM rejects CPUs whose features were not checked against the finalized capabilities.

---
 arch/arm64/kvm/arm.c             | 17 +++++++++++++++++
 arch/arm64/kvm/hyp/nvhe/percpu.c | 16 ++++++++++++++++
 2 files changed, 33 insertions(+)
arch/arm64/kvm/arm.c +17 -0
index 8bb9fffe2a8f..58e9cc183bd5 100644
@@ -1481,6 +1481,21 @@ static inline void hyp_cpu_pm_exit(void)
 }
 #endif
 
+static void init_cpu_logical_map(void)
+{
+	extern u64 kvm_nvhe_sym(__cpu_logical_map)[NR_CPUS];
+	int cpu;
+
+	/*
+	 * Copy the MPIDR <-> logical CPU ID mapping to hyp.
+	 * Only copy the set of online CPUs whose features have been chacked
+	 * against the finalized system capabilities. The hypervisor will not
+	 * allow any other CPUs from the `possible` set to boot.
+	 */
+	for_each_online_cpu(cpu)
+		CHOOSE_NVHE_SYM(__cpu_logical_map)[cpu] = cpu_logical_map(cpu);
+}
+
 static int init_common_resources(void)
 {
 	return kvm_set_ipa_limit();
@@ -1658,6 +1673,8 @@ static int init_hyp_mode(void)
 		}
 	}
 
+	init_cpu_logical_map();
+
 	return 0;
 
 out_err:
arch/arm64/kvm/hyp/nvhe/percpu.c +16 -0
index 5fd0c5696907..8b7f6b7dbd48 100644
@@ -8,6 +8,22 @@
 #include <asm/kvm_hyp.h>
 #include <asm/kvm_mmu.h>
 
+/*
+ * nVHE copy of data structures tracking available CPU cores.
+ * Only entries for CPUs that were online at KVM init are populated.
+ * Other CPUs should not be allowed to boot because their features were
+ * not checked against the finalized system capabilities.
+ */
+u64 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID };
+
+u64 cpu_logical_map(int cpu)
+{
+	if (cpu < 0 || cpu >= ARRAY_SIZE(__cpu_logical_map))
+		hyp_panic();
+
+	return __cpu_logical_map[cpu];
+}
+
 unsigned long __hyp_per_cpu_offset(unsigned int cpu)
 {
 	unsigned long *cpu_base_array;
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#11 lore raw

RFC PATCH 9/26 kvm: arm64: Move hyp-init params to a per-CPU struct

In reply to David Brazdil

Once we start initializing KVM on newly booted cores before the rest of the kernel, parameters to __do_hyp_init will need to be provided by EL2 rather than EL1. At that point it will not be possible to pass its four arguments directly because PSCI_CPU_ON only supports one context argument.

Refactor __do_hyp_init to accept its parameters in a struct. This prepares the code for KVM booting cores as well as removes any limits on the number of __do_hyp_init arguments.

---
 arch/arm64/include/asm/kvm_asm.h   |  7 +++++++
 arch/arm64/include/asm/kvm_hyp.h   |  4 ++++
 arch/arm64/kernel/asm-offsets.c    |  4 ++++
 arch/arm64/kvm/arm.c               | 26 ++++++++++++++------------
 arch/arm64/kvm/hyp/nvhe/hyp-init.S | 21 ++++++++++-----------
 arch/arm64/kvm/hyp/nvhe/hyp-main.c |  2 ++
 6 files changed, 41 insertions(+), 23 deletions(-)
arch/arm64/include/asm/kvm_asm.h +7 -0
index 54387ccd1ab2..a49a87a186c3 100644
@@ -150,6 +150,13 @@ extern void *__vhe_undefined_symbol;
 
 #endif
 
+struct kvm_nvhe_init_params {
+	phys_addr_t pgd_ptr;
+	unsigned long tpidr_el2;
+	unsigned long hyp_stack_ptr;
+	unsigned long vector_ptr;
+};
+
 /* Translate a kernel address @ptr into its equivalent linear mapping */
 #define kvm_ksym_ref(ptr)						\
 	({								\
arch/arm64/include/asm/kvm_hyp.h +4 -0
index 6b664de5ec1f..a3289071f3d8 100644
@@ -15,6 +15,10 @@
 DECLARE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt);
 DECLARE_PER_CPU(unsigned long, kvm_hyp_vector);
 
+#ifdef __KVM_NVHE_HYPERVISOR__
+DECLARE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
+#endif
+
 #define read_sysreg_elx(r,nvh,vh)					\
 	({								\
 		u64 reg;						\
arch/arm64/kernel/asm-offsets.c +4 -0
index 7d32fc959b1a..0cbb86135c7c 100644
@@ -110,6 +110,10 @@ int main(void)
   DEFINE(CPU_APGAKEYLO_EL1,	offsetof(struct kvm_cpu_context, sys_regs[APGAKEYLO_EL1]));
   DEFINE(HOST_CONTEXT_VCPU,	offsetof(struct kvm_cpu_context, __hyp_running_vcpu));
   DEFINE(HOST_DATA_CONTEXT,	offsetof(struct kvm_host_data, host_ctxt));
+  DEFINE(NVHE_INIT_PGD_PTR,	offsetof(struct kvm_nvhe_init_params, pgd_ptr));
+  DEFINE(NVHE_INIT_TPIDR_EL2,	offsetof(struct kvm_nvhe_init_params, tpidr_el2));
+  DEFINE(NVHE_INIT_STACK_PTR,	offsetof(struct kvm_nvhe_init_params, hyp_stack_ptr));
+  DEFINE(NVHE_INIT_VECTOR_PTR,	offsetof(struct kvm_nvhe_init_params, vector_ptr));
 #endif
 #ifdef CONFIG_CPU_PM
   DEFINE(CPU_CTX_SP,		offsetof(struct cpu_suspend_ctx, sp));
arch/arm64/kvm/arm.c +14 -12
index 58e9cc183bd5..ff200fc8d653 100644
@@ -50,6 +50,7 @@ DECLARE_KVM_HYP_PER_CPU(unsigned long, kvm_hyp_vector);
 
 static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
 unsigned long kvm_arm_hyp_percpu_base[NR_CPUS];
+DECLARE_KVM_NVHE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
 
 /* The VMID used in the VTTBR */
 static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
@@ -1331,10 +1332,7 @@ static int kvm_map_vectors(void)
 
 static void cpu_init_hyp_mode(void)
 {
-	phys_addr_t pgd_ptr;
-	unsigned long hyp_stack_ptr;
-	unsigned long vector_ptr;
-	unsigned long tpidr_el2;
+	struct kvm_nvhe_init_params *params = this_cpu_ptr_nvhe_sym(kvm_init_params);
 	struct arm_smccc_res res;
 
 	/* Switch from the HYP stub to our own HYP init vector */
@@ -1345,13 +1343,18 @@ static void cpu_init_hyp_mode(void)
 	 * kernel's mapping to the linear mapping, and store it in tpidr_el2
 	 * so that we can use adr_l to access per-cpu variables in EL2.
 	 */
-	tpidr_el2 = (unsigned long)this_cpu_ptr_nvhe_sym(__per_cpu_start) -
-		    (unsigned long)kvm_ksym_ref(CHOOSE_NVHE_SYM(__per_cpu_start));
+	params->tpidr_el2 = (unsigned long)this_cpu_ptr_nvhe_sym(__per_cpu_start) -
+			    (unsigned long)kvm_ksym_ref(CHOOSE_NVHE_SYM(__per_cpu_start));
 
-	pgd_ptr = kvm_mmu_get_httbr();
-	hyp_stack_ptr = __this_cpu_read(kvm_arm_hyp_stack_page) + PAGE_SIZE;
-	hyp_stack_ptr = kern_hyp_va(hyp_stack_ptr);
-	vector_ptr = (unsigned long)kern_hyp_va(kvm_ksym_ref(__kvm_hyp_host_vector));
+	params->pgd_ptr = kvm_mmu_get_httbr();
+	params->vector_ptr = (unsigned long)kern_hyp_va(kvm_ksym_ref(__kvm_hyp_host_vector));
+	params->hyp_stack_ptr = kern_hyp_va(__this_cpu_read(kvm_arm_hyp_stack_page) + PAGE_SIZE);
+
+	/*
+	 * Flush the init params from the data cache because the struct will
+	 * be read from while the MMU is off.
+	 */
+	__flush_dcache_area(params, sizeof(*params));
 
 	/*
 	 * Call initialization code, and switch to the full blown HYP code.
@@ -1360,8 +1363,7 @@ static void cpu_init_hyp_mode(void)
 	 * cpus_have_const_cap() wrapper.
 	 */
 	BUG_ON(!system_capabilities_finalized());
-	arm_smccc_1_1_hvc(KVM_HOST_SMCCC_FUNC(__kvm_hyp_init),
-			  pgd_ptr, tpidr_el2, hyp_stack_ptr, vector_ptr, &res);
+	arm_smccc_1_1_hvc(KVM_HOST_SMCCC_FUNC(__kvm_hyp_init), virt_to_phys(params), &res);
 	WARN_ON(res.a0 != SMCCC_RET_SUCCESS);
 
 	/*
arch/arm64/kvm/hyp/nvhe/hyp-init.S +10 -11
index 96e70f976ff5..6f3ac5d428ec 100644
@@ -47,10 +47,7 @@ __invalid:
 
 	/*
 	 * x0: SMCCC function ID
-	 * x1: HYP pgd
-	 * x2: per-CPU offset
-	 * x3: HYP stack
-	 * x4: HYP vectors
+	 * x1: struct kvm_nvhe_init_params PA
 	 */
 __do_hyp_init:
 	/* Check for a stub HVC call */
@@ -71,10 +68,16 @@ __do_hyp_init:
 	mov	x0, #SMCCC_RET_NOT_SUPPORTED
 	eret
 
-1:
-	/* Set tpidr_el2 for use by HYP to free a register */
-	msr	tpidr_el2, x2
+1:	ldr	x0, [x1, #NVHE_INIT_TPIDR_EL2]
+	msr	tpidr_el2, x0
 
+	ldr	x0, [x1, #NVHE_INIT_STACK_PTR]
+	mov	sp, x0
+
+	ldr	x0, [x1, #NVHE_INIT_VECTOR_PTR]
+	msr	vbar_el2, x0
+
+	ldr	x1, [x1, #NVHE_INIT_PGD_PTR]
 	phys_to_ttbr x0, x1
 alternative_if ARM64_HAS_CNP
 	orr	x0, x0, #TTBR_CNP_BIT
@@ -134,10 +137,6 @@ alternative_else_nop_endif
 	msr	sctlr_el2, x0
 	isb
 
-	/* Set the stack and new vectors */
-	mov	sp, x3
-	msr	vbar_el2, x4
-
 	/* Hello, World! */
 	mov	x0, #SMCCC_RET_SUCCESS
 	eret
arch/arm64/kvm/hyp/nvhe/hyp-main.c +2 -0
index e2eafe2c93af..411b0f652417 100644
@@ -14,6 +14,8 @@
 
 #include <kvm/arm_hypercalls.h>
 
+DEFINE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
+
 static void handle_host_hcall(unsigned long func_id,
 			      struct kvm_cpu_context *host_ctxt)
 {
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#12 lore raw

RFC PATCH 10/26 kvm: arm64: Refactor handle_trap to use a switch

In reply to David Brazdil

Small refactor so that nVHE's handle_trap uses a switch on the Exception Class value of ESR_EL2 in preparation for adding a handler of SMC32/64.

---
 arch/arm64/kvm/hyp/nvhe/hyp-main.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
arch/arm64/kvm/hyp/nvhe/hyp-main.c +8 -7
index 411b0f652417..19332c20fcde 100644
@@ -16,9 +16,9 @@
 
 DEFINE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
 
-static void handle_host_hcall(unsigned long func_id,
-			      struct kvm_cpu_context *host_ctxt)
+static void handle_host_hcall(struct kvm_cpu_context *host_ctxt)
 {
+	unsigned long func_id = host_ctxt->regs.regs[0];
 	unsigned long ret = 0;
 
 	switch (func_id) {
@@ -109,11 +109,12 @@ static void handle_host_hcall(unsigned long func_id,
 void handle_trap(struct kvm_cpu_context *host_ctxt)
 {
 	u64 esr = read_sysreg_el2(SYS_ESR);
-	unsigned long func_id;
 
-	if (ESR_ELx_EC(esr) != ESR_ELx_EC_HVC64)
+	switch (ESR_ELx_EC(esr)) {
+	case ESR_ELx_EC_HVC64:
+		handle_host_hcall(host_ctxt);
+		break;
+	default:
 		hyp_panic();
-
-	func_id = host_ctxt->regs.regs[0];
-	handle_host_hcall(func_id, host_ctxt);
+	}
 }
Signature · 1 line
2.29.1.341.ge80a0c044ae-goog
#13 lore raw

RFC PATCH 11/26 kvm: arm64: Extract parts of el2_setup into a macro

In reply to David Brazdil

When the a CPU is booted in EL2, the kernel checks for VHE support and initializes the CPU core accordingly. For nVHE it also installs the stub vectors and drops down to EL1.

Once KVM gains the ability to boot cores without going through the kernel entry point, it will need to initialize the CPU the same way. Extract the relevant bits of el2_setup into init_el2_state macro with an argument specifying whether to initialize for VHE or nVHE.

No functional change. Size of el2_setup increased by 148 bytes due to duplication.

---
 arch/arm64/include/asm/kvm_asm.h | 128 ++++++++++++++++++++++++++++
 arch/arm64/kernel/head.S         | 140 +++----------------------------
 2 files changed, 141 insertions(+), 127 deletions(-)
arch/arm64/include/asm/kvm_asm.h +128 -0
index a49a87a186c3..893327d1e449 100644
@@ -331,6 +331,134 @@ extern char __smccc_workaround_1_smc[__SMCCC_WORKAROUND_1_SMC_SZ];
 	msr	sp_el0, \tmp
 .endm
 
+.macro init_el2_state mode
+
+.ifnes "\mode", "vhe"
+.ifnes "\mode", "nvhe"
+.error "Invalid 'mode' argument"
+.endif
+.endif
+
+	mov_q	x0, (SCTLR_EL2_RES1 | ENDIAN_SET_EL2)
+	msr	sctlr_el2, x0
+	isb
+
+	/*
+	 * Allow Non-secure EL1 and EL0 to access physical timer and counter.
+	 * This is not necessary for VHE, since the host kernel runs in EL2,
+	 * and EL0 accesses are configured in the later stage of boot process.
+	 * Note that when HCR_EL2.E2H == 1, CNTHCTL_EL2 has the same bit layout
+	 * as CNTKCTL_EL1, and CNTKCTL_EL1 accessing instructions are redefined
+	 * to access CNTHCTL_EL2. This allows the kernel designed to run at EL1
+	 * to transparently mess with the EL0 bits via CNTKCTL_EL1 access in
+	 * EL2.
+	 */
+.ifeqs "\mode", "nvhe"
+	mrs	x0, cnthctl_el2
+	orr	x0, x0, #3			// Enable EL1 physical timers
+	msr	cnthctl_el2, x0
+.endif
+	msr	cntvoff_el2, xzr		// Clear virtual offset
+
+#ifdef CONFIG_ARM_GIC_V3
+	/* GICv3 system register access */
+	mrs	x0, id_aa64pfr0_el1
+	ubfx	x0, x0, #ID_AA64PFR0_GIC_SHIFT, #4
+	cbz	x0, 3f
+
+	mrs_s	x0, SYS_ICC_SRE_EL2
+	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1
+	orr	x0, x0, #ICC_SRE_EL2_ENABLE	// Set ICC_SRE_EL2.Enable==1
+	msr_s	SYS_ICC_SRE_EL2, x0
+	isb					// Make sure SRE is now set
+	mrs_s	x0, SYS_ICC_SRE_EL2		// Read SRE back,
+	tbz	x0, #0, 3f			// and check that it sticks
+	msr_s	SYS_ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
+3:
+#endif
+
+	/* Populate ID registers. */
+	mrs	x0, midr_el1
+	mrs	x1, mpidr_el1
+	msr	vpidr_el2, x0
+	msr	vmpidr_el2, x1
+
+#ifdef CONFIG_COMPAT
+	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
+#endif
+
+	/* EL2 debug */
+	mrs	x1, id_aa64dfr0_el1
+	sbfx	x0, x1, #ID_AA64DFR0_PMUVER_SHIFT, #4
+	cmp	x0, #1
+	b.lt	4f				// Skip if no PMU present
+	mrs	x0, pmcr_el0			// Disable debug access traps
+	ubfx	x0, x0, #11, #5			// to EL2 and allow access to
+4:
+	csel	x3, xzr, x0, lt			// all PMU counters from EL1
+
+	/* Statistical profiling */
+	ubfx	x0, x1, #ID_AA64DFR0_PMSVER_SHIFT, #4
+	cbz	x0, 7f				// Skip if SPE not present
+.ifeqs "\mode", "nvhe"
+	mrs_s	x4, SYS_PMBIDR_EL1		// If SPE available at EL2,
+	and	x4, x4, #(1 << SYS_PMBIDR_EL1_P_SHIFT)
+	cbnz	x4, 5f				// then permit sampling of physical
+	mov	x4, #(1 << SYS_PMSCR_EL2_PCT_SHIFT | \
+		      1 << SYS_PMSCR_EL2_PA_SHIFT)
+	msr_s	SYS_PMSCR_EL2, x4		// addresses and physical counter
+5:
+	mov	x1, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
+	orr	x3, x3, x1			// If we don't have VHE, then
+	b	7f				// use EL1&0 translation.
+.endif
+	orr	x3, x3, #MDCR_EL2_TPMS		// and disable access from EL1
+7:
+	msr	mdcr_el2, x3			// Configure debug traps
+
+	/* LORegions */
+	mrs	x1, id_aa64mmfr1_el1
+	ubfx	x0, x1, #ID_AA64MMFR1_LOR_SHIFT, 4
+	cbz	x0, 1f
+	msr_s	SYS_LORC_EL1, xzr
+1:
+
+	/* Stage-2 translation */
+	msr	vttbr_el2, xzr
+
+.ifeqs "\mode", "nvhe"
+	/*
+	 * When VHE is not in use, early init of EL2 and EL1 needs to be
+	 * done here.
+	 * When VHE _is_ in use, EL1 will not be used in the host and
+	 * requires no configuration, and all non-hyp-specific EL2 setup
+	 * will be done via the _EL1 system register aliases in __cpu_setup.
+	 */
+	mov_q	x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1)
+	msr	sctlr_el1, x0
+
+	/* Coprocessor traps. */
+	mov	x0, #0x33ff
+	msr	cptr_el2, x0			// Disable copro. traps to EL2
+
+	/* SVE register access */
+	mrs	x1, id_aa64pfr0_el1
+	ubfx	x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
+	cbz	x1, 7f
+
+	bic	x0, x0, #CPTR_EL2_TZ		// Also disable SVE traps
+	msr	cptr_el2, x0			// Disable copro. traps to EL2
+	isb
+	mov	x1, #ZCR_ELx_LEN_MASK		// SVE: Enable full vector
+	msr_s	SYS_ZCR_EL2, x1			// length for EL1.
+
+	/* spsr */
+7:	mov	x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
+		      PSR_MODE_EL1h)
+	msr	spsr_el2, x0
+.endif
+.endm
+
 #endif
 
 #endif /* __ARM_KVM_ASM_H__ */
arch/arm64/kernel/head.S +13 -127

172 lines not on this page · raw message

Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#14 lore raw

RFC PATCH 12/26 kvm: arm64: Add SMC handler in nVHE EL2

In reply to David Brazdil

Add handler of host SMCs in KVM nVHE trap handler. Forward all SMCs to EL3 and propagate the result back to EL1. This is done in preparation for validating host SMCs.

---
 arch/arm64/kvm/hyp/nvhe/hyp-main.c | 36 ++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
arch/arm64/kvm/hyp/nvhe/hyp-main.c +36 -0
index 19332c20fcde..fffc2dc09a1f 100644
@@ -106,6 +106,38 @@ static void handle_host_hcall(struct kvm_cpu_context *host_ctxt)
 	host_ctxt->regs.regs[1] = ret;
 }
 
+static void skip_host_instruction(void)
+{
+	write_sysreg_el2(read_sysreg_el2(SYS_ELR) + 4, SYS_ELR);
+}
+
+static void forward_host_smc(struct kvm_cpu_context *host_ctxt)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_smc(host_ctxt->regs.regs[0], host_ctxt->regs.regs[1],
+			  host_ctxt->regs.regs[2], host_ctxt->regs.regs[3],
+			  host_ctxt->regs.regs[4], host_ctxt->regs.regs[5],
+			  host_ctxt->regs.regs[6], host_ctxt->regs.regs[7],
+			  &res);
+	host_ctxt->regs.regs[0] = res.a0;
+	host_ctxt->regs.regs[1] = res.a1;
+	host_ctxt->regs.regs[2] = res.a2;
+	host_ctxt->regs.regs[3] = res.a3;
+}
+
+static void handle_host_smc(struct kvm_cpu_context *host_ctxt)
+{
+	/*
+	 * Unlike HVC, the return address of an SMC is the instruction's PC.
+	 * Move the return address past the instruction.
+	 */
+	skip_host_instruction();
+
+	/* Forward SMC not handled in EL2 to EL3. */
+	forward_host_smc(host_ctxt);
+}
+
 void handle_trap(struct kvm_cpu_context *host_ctxt)
 {
 	u64 esr = read_sysreg_el2(SYS_ESR);
@@ -114,6 +146,10 @@ void handle_trap(struct kvm_cpu_context *host_ctxt)
 	case ESR_ELx_EC_HVC64:
 		handle_host_hcall(host_ctxt);
 		break;
+	case ESR_ELx_EC_SMC32:
+	case ESR_ELx_EC_SMC64:
+		handle_host_smc(host_ctxt);
+		break;
 	default:
 		hyp_panic();
 	}
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
maintainer
#15 lore raw

Re: [RFC PATCH 12/26] kvm: arm64: Add SMC handler in nVHE EL2

Quoted 55 lines · David Brazdil

Add handler of host SMCs in KVM nVHE trap handler. Forward all SMCs to EL3 and propagate the result back to EL1. This is done in preparation for validating host SMCs.

---
 arch/arm64/kvm/hyp/nvhe/hyp-main.c | 36 ++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
arch/arm64/kvm/hyp/nvhe/hyp-main.c +32 -0
index 19332c20fcde..fffc2dc09a1f 100644
@@ -106,6 +106,38 @@ static void handle_host_hcall(struct
 kvm_cpu_context *host_ctxt)
 	host_ctxt->regs.regs[1] = ret;
 }
 
+static void skip_host_instruction(void)
+{
+	write_sysreg_el2(read_sysreg_el2(SYS_ELR) + 4, SYS_ELR);
+}
+
+static void forward_host_smc(struct kvm_cpu_context *host_ctxt)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_smc(host_ctxt->regs.regs[0], host_ctxt->regs.regs[1],
+			  host_ctxt->regs.regs[2], host_ctxt->regs.regs[3],
+			  host_ctxt->regs.regs[4], host_ctxt->regs.regs[5],
+			  host_ctxt->regs.regs[6], host_ctxt->regs.regs[7],
+			  &res);
+	host_ctxt->regs.regs[0] = res.a0;
+	host_ctxt->regs.regs[1] = res.a1;
+	host_ctxt->regs.regs[2] = res.a2;
+	host_ctxt->regs.regs[3] = res.a3;
+}
+
+static void handle_host_smc(struct kvm_cpu_context *host_ctxt)
+{
+	/*
+	 * Unlike HVC, the return address of an SMC is the instruction's PC.
+	 * Move the return address past the instruction.
+	 */
+	skip_host_instruction();
+
+	/* Forward SMC not handled in EL2 to EL3. */
+	forward_host_smc(host_ctxt);
+}
+
 void handle_trap(struct kvm_cpu_context *host_ctxt)
 {
arch/arm64/kvm/hyp/nvhe/hyp-main.c +0 -0
 	u64 esr = read_sysreg_el2(SYS_ESR);

arch/arm64/kvm/hyp/nvhe/hyp-main.c void handle_trap(struct kvm_cpu_context · line 150

Quoted 5 lines
arch/arm64/kvm/hyp/nvhe/hyp-main.c +1 -0
@@ -114,6 +146,10 @@ void handle_trap(struct kvm_cpu_context 
 *host_ctxt)
 	case ESR_ELx_EC_HVC64:
 		handle_host_hcall(host_ctxt);
 		break;
+	case ESR_ELx_EC_SMC32:

How is that even possible? Host EL1 is strictly 64bit, so SMC32 cannot occur.

Quoted 6 lines
arch/arm64/kvm/hyp/nvhe/hyp-main.c +3 -0
+	case ESR_ELx_EC_SMC64:
+		handle_host_smc(host_ctxt);
+		break;
 	default:
 		hyp_panic();

}

Thanks,

        M.
Signature · 1 line
Jazz is not dead. It just smells funny...
#16 lore raw

RFC PATCH 13/26 kvm: arm64: Bootstrap PSCI SMC handler in nVHE EL2

In reply to David Brazdil

Add a handler of PSCI SMCs in nVHE hyp code. The handler is initialized with the version used by the host's PSCI driver and the function IDs it was configured with. If the SMC function ID matches one of the configured PSCI calls (for v0.1) or falls into the PSCI function ID range (for v0.2+), the SMC is handled by the PSCI handler. For now, all SMCs return PSCI_RET_NOT_SUPPORTED.

---
 arch/arm64/include/asm/kvm_hyp.h   |   4 ++
 arch/arm64/kvm/arm.c               |  12 ++++
 arch/arm64/kvm/hyp/nvhe/Makefile   |   2 +-
 arch/arm64/kvm/hyp/nvhe/hyp-main.c |   4 ++
 arch/arm64/kvm/hyp/nvhe/psci.c     | 102 +++++++++++++++++++++++++++++
 include/uapi/linux/psci.h          |   1 +
 6 files changed, 124 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/kvm/hyp/nvhe/psci.c
arch/arm64/include/asm/kvm_hyp.h +4 -0
index a3289071f3d8..95a2bbbcc7e1 100644
@@ -96,6 +96,10 @@ void deactivate_traps_vhe_put(void);
 
 u64 __guest_enter(struct kvm_vcpu *vcpu);
 
+#ifdef __KVM_NVHE_HYPERVISOR__
+bool kvm_host_psci_handler(struct kvm_cpu_context *host_ctxt);
+#endif
+
 void __noreturn hyp_panic(void);
 #ifdef __KVM_NVHE_HYPERVISOR__
 void __noreturn __hyp_do_panic(bool restore_host, u64 spsr, u64 elr, u64 par);
arch/arm64/kvm/arm.c +12 -0
index ff200fc8d653..cedec793da64 100644
@@ -19,6 +19,7 @@
 #include <linux/kvm_irqfd.h>
 #include <linux/irqbypass.h>
 #include <linux/sched/stat.h>
+#include <linux/psci.h>
 #include <trace/events/kvm.h>
 
 #define CREATE_TRACE_POINTS
@@ -1498,6 +1499,16 @@ static void init_cpu_logical_map(void)
 		CHOOSE_NVHE_SYM(__cpu_logical_map)[cpu] = cpu_logical_map(cpu);
 }
 
+static void init_psci(void)
+{
+	extern u32 kvm_nvhe_sym(kvm_host_psci_version);
+	extern u32 kvm_nvhe_sym(kvm_host_psci_function_id)[PSCI_FN_MAX];
+
+	kvm_nvhe_sym(kvm_host_psci_version) = psci_driver_version;
+	memcpy(kvm_nvhe_sym(kvm_host_psci_function_id),
+		psci_function_id, sizeof(psci_function_id));
+}
+
 static int init_common_resources(void)
 {
 	return kvm_set_ipa_limit();
@@ -1676,6 +1687,7 @@ static int init_hyp_mode(void)
 	}
 
 	init_cpu_logical_map();
+	init_psci();
 
 	return 0;
 
arch/arm64/kvm/hyp/nvhe/Makefile +1 -1
index c45f440cce51..647b63337a51 100644
@@ -7,7 +7,7 @@ asflags-y := -D__KVM_NVHE_HYPERVISOR__
 ccflags-y := -D__KVM_NVHE_HYPERVISOR__
 
 obj-y := timer-sr.o sysreg-sr.o debug-sr.o switch.o tlb.o hyp-init.o host.o \
-	 hyp-main.o percpu.o
+	 hyp-main.o percpu.o psci.o
 obj-y += ../vgic-v3-sr.o ../aarch32.o ../vgic-v2-cpuif-proxy.o ../entry.o \
 	 ../fpsimd.o ../hyp-entry.o
 
arch/arm64/kvm/hyp/nvhe/hyp-main.c +4 -0
index fffc2dc09a1f..aa54db514550 100644
@@ -134,6 +134,10 @@ static void handle_host_smc(struct kvm_cpu_context *host_ctxt)
 	 */
 	skip_host_instruction();
 
+	/* Try to handle host's PSCI SMCs. */
+	if (kvm_host_psci_handler(host_ctxt))
+		return;
+
 	/* Forward SMC not handled in EL2 to EL3. */
 	forward_host_smc(host_ctxt);
 }
arch/arm64/kvm/hyp/nvhe/psci.c new file +102 -0

102 lines not on this page · raw message

include/uapi/linux/psci.h +1 -0
index 2fcad1dd0b0e..0d52b8dbe8c2 100644
@@ -29,6 +29,7 @@
 #define PSCI_0_2_FN64_BASE			\
 					(PSCI_0_2_FN_BASE + PSCI_0_2_64BIT)
 #define PSCI_0_2_FN64(n)			(PSCI_0_2_FN64_BASE + (n))
+#define PSCI_0_2_FN_ID_MASK			0xffff
 
 #define PSCI_0_2_FN_PSCI_VERSION		PSCI_0_2_FN(0)
 #define PSCI_0_2_FN_CPU_SUSPEND			PSCI_0_2_FN(1)
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#17 lore raw

RFC PATCH 14/26 kvm: arm64: Forward safe PSCI SMCs coming from host

In reply to David Brazdil

Forward the following PSCI SMCs issued by host to EL3 as they do not require the hypervisor's intervention. This assumes that EL3 correctly implements the PSCI specification.

Only function IDs implemented in Linux are included.

Where both 32-bit and 64-bit variants exist, it is assumed that the host will always use the 64-bit variant.

* SMCs that only return information about the system

   * PSCI_VERSION        - PSCI version implemented by EL3
   * PSCI_FEATURES       - optional features supported by EL3
   * AFFINITY_INFO       - power state of core/cluster
   * MIGRATE_INFO_TYPE   - whether Trusted OS can be migrated

* MIGRATE_INFO_UP_CPU - resident core of Trusted OS
* operations which do not affect the hypervisor
* MIGRATE - migrate Trusted OS to a different core
* SET_SUSPEND_MODE - toggle OS-initiated mode
* system shutdown/reset
* SYSTEM_OFF
* SYSTEM_RESET
* SYSTEM_RESET2

---
 arch/arm64/kvm/hyp/nvhe/psci.c | 40 +++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)
arch/arm64/kvm/hyp/nvhe/psci.c +39 -1
index 82d3b2c89658..8f779560ab6f 100644
@@ -50,14 +50,48 @@ static bool is_psci_call(u64 func_id)
 		return is_psci_0_2_fn_call(func_id);
 }
 
+static unsigned long psci_call(unsigned long fn, unsigned long arg0,
+			       unsigned long arg1, unsigned long arg2)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_smc(fn, arg0, arg1, arg2, &res);
+	return res.a0;
+}
+
+static unsigned long psci_forward(struct kvm_cpu_context *host_ctxt)
+{
+	return psci_call(host_ctxt->regs.regs[0], host_ctxt->regs.regs[1],
+			 host_ctxt->regs.regs[2], host_ctxt->regs.regs[3]);
+}
+
+static __noreturn unsigned long psci_forward_noreturn(struct kvm_cpu_context *host_ctxt)
+{
+	psci_forward(host_ctxt);
+	hyp_panic(); /* unreachable */
+}
+
 static unsigned long psci_0_1_handler(u64 func_id, struct kvm_cpu_context *host_ctxt)
 {
-	return PSCI_RET_NOT_SUPPORTED;
+	if (func_id == kvm_host_psci_function_id[PSCI_FN_MIGRATE])
+		return psci_forward(host_ctxt);
+	else
+		return PSCI_RET_NOT_SUPPORTED;
 }
 
 static unsigned long psci_0_2_handler(u64 func_id, struct kvm_cpu_context *host_ctxt)
 {
 	switch (func_id) {
+	case PSCI_0_2_FN_PSCI_VERSION:
+	case PSCI_0_2_FN64_AFFINITY_INFO:
+	case PSCI_0_2_FN64_MIGRATE:
+	case PSCI_0_2_FN_MIGRATE_INFO_TYPE:
+	case PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU:
+		return psci_forward(host_ctxt);
+	case PSCI_0_2_FN_SYSTEM_OFF:
+	case PSCI_0_2_FN_SYSTEM_RESET:
+		psci_forward_noreturn(host_ctxt);
+		unreachable();
 	default:
 		return PSCI_RET_NOT_SUPPORTED;
 	}
@@ -72,6 +106,10 @@ static unsigned long psci_1_0_handler(u64 func_id, struct kvm_cpu_context *host_
 		return ret;
 
 	switch (func_id) {
+	case PSCI_1_0_FN_PSCI_FEATURES:
+	case PSCI_1_0_FN_SET_SUSPEND_MODE:
+	case PSCI_1_1_FN64_SYSTEM_RESET2:
+		return psci_forward(host_ctxt);
 	default:
 		return PSCI_RET_NOT_SUPPORTED;
 	}
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#18 lore raw

RFC PATCH 15/26 arm64: kvm: Add standalone ticket spinlock implementation for use at hyp

In reply to David Brazdil

From: Will Deacon <[email protected]>

We will soon need to synchronise multiple CPUs in the hyp text at EL2. The qspinlock-based locking used by the host is overkill for this purpose and relies on the kernel's "percpu" implementation for the MCS nodes.

Implement a simple ticket locking scheme based heavily on the code removed by commit c11090474d70 ("arm64: locking: Replace ticket lock implementation with qspinlock").

---
 arch/arm64/kvm/hyp/include/nvhe/spinlock.h | 96 ++++++++++++++++++++++
 1 file changed, 96 insertions(+)
 create mode 100644 arch/arm64/kvm/hyp/include/nvhe/spinlock.h
arch/arm64/kvm/hyp/include/nvhe/spinlock.h new file +96 -0
new file mode 100644
index 000000000000..dc0397e5b5f2
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * A stand-alone ticket spinlock implementation for use by the non-VHE
+ * KVM hypervisor code running at EL2.
+ *
+ * Copyright (C) 2020 Google LLC
+ * Author: Will Deacon <[email protected]>
+ *
+ * Heavily based on the implementation removed by c11090474d70 which was:
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __KVM_NVHE_HYPERVISOR__
+#error "Attempt to include nVHE code outside of EL2 object"
+#endif
+
+#ifndef __ARM64_KVM_NVHE_SPINLOCK_H__
+#define __ARM64_KVM_NVHE_SPINLOCK_H__
+
+#include <asm/alternative.h>
+#include <asm/lse.h>
+
+typedef union hyp_spinlock {
+	u32	__val;
+	struct {
+#ifdef __AARCH64EB__
+		u16 next, owner;
+#else
+		u16 owner, next;
+	};
+#endif
+} hyp_spinlock_t;
+
+#define hyp_spin_lock_init(l)						\
+do {									\
+	*(l) = (hyp_spinlock_t){ .__val = 0 };				\
+} while (0)
+
+static inline void hyp_spin_lock(hyp_spinlock_t *lock)
+{
+	u32 tmp;
+	hyp_spinlock_t lockval, newval;
+
+	asm volatile(
+	/* Atomically increment the next ticket. */
+	ARM64_LSE_ATOMIC_INSN(
+	/* LL/SC */
+"	prfm	pstl1strm, %3\n"
+"1:	ldaxr	%w0, %3\n"
+"	add	%w1, %w0, #(1 << 16)\n"
+"	stxr	%w2, %w1, %3\n"
+"	cbnz	%w2, 1b\n",
+	/* LSE atomics */
+"	mov	%w2, #(1 << 16)\n"
+"	ldadda	%w2, %w0, %3\n"
+	__nops(3))
+
+	/* Did we get the lock? */
+"	eor	%w1, %w0, %w0, ror #16\n"
+"	cbz	%w1, 3f\n"
+	/*
+	 * No: spin on the owner. Send a local event to avoid missing an
+	 * unlock before the exclusive load.
+	 */
+"	sevl\n"
+"2:	wfe\n"
+"	ldaxrh	%w2, %4\n"
+"	eor	%w1, %w2, %w0, lsr #16\n"
+"	cbnz	%w1, 2b\n"
+	/* We got the lock. Critical section starts here. */
+"3:"
+	: "=&r" (lockval), "=&r" (newval), "=&r" (tmp), "+Q" (*lock)
+	: "Q" (lock->owner)
+	: "memory");
+}
+
+static inline void hyp_spin_unlock(hyp_spinlock_t *lock)
+{
+	u64 tmp;
+
+	asm volatile(
+	ARM64_LSE_ATOMIC_INSN(
+	/* LL/SC */
+	"	ldrh	%w1, %0\n"
+	"	add	%w1, %w1, #1\n"
+	"	stlrh	%w1, %0",
+	/* LSE atomics */
+	"	mov	%w1, #1\n"
+	"	staddlh	%w1, %0\n"
+	__nops(1))
+	: "=Q" (lock->owner), "=&r" (tmp)
+	:
+	: "memory");
+}
+
+#endif /* __ARM64_KVM_NVHE_SPINLOCK_H__ */
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#19 lore raw

RFC PATCH 16/26 kvm: arm64: Add offset for hyp VA <-> PA conversion

In reply to David Brazdil

Add a host-initialized constant to KVM nVHE hyp code for converting between EL2 linear map virtual addresses and physical addresses. Also add __hyp_pa macro that performs the conversion.

---
 arch/arm64/kvm/arm.c           | 15 +++++++++++++++
 arch/arm64/kvm/hyp/nvhe/psci.c |  3 +++
 2 files changed, 18 insertions(+)
arch/arm64/kvm/arm.c +15 -0
index cedec793da64..580d4a656a7b 100644
@@ -1484,6 +1484,20 @@ static inline void hyp_cpu_pm_exit(void)
 }
 #endif
 
+static void init_hyp_physvirt_offset(void)
+{
+	extern s64 kvm_nvhe_sym(hyp_physvirt_offset);
+	unsigned long kern_vaddr, hyp_vaddr, paddr;
+
+	/* Check that kvm_arm_hyp_percpu_base has been set. */
+	BUG_ON(kvm_arm_hyp_percpu_base[0] == 0);
+
+	kern_vaddr = kvm_arm_hyp_percpu_base[0];
+	hyp_vaddr = kern_hyp_va(kern_vaddr);
+	paddr = __pa(kern_vaddr);
+	CHOOSE_NVHE_SYM(hyp_physvirt_offset) = (s64)paddr - (s64)hyp_vaddr;
+}
+
 static void init_cpu_logical_map(void)
 {
 	extern u64 kvm_nvhe_sym(__cpu_logical_map)[NR_CPUS];
@@ -1686,6 +1700,7 @@ static int init_hyp_mode(void)
 		}
 	}
 
+	init_hyp_physvirt_offset();
 	init_cpu_logical_map();
 	init_psci();
 
arch/arm64/kvm/hyp/nvhe/psci.c +3 -0
index 8f779560ab6f..3eafcf48a29b 100644
@@ -16,6 +16,9 @@
 /* Config options set by the host. */
 u32 kvm_host_psci_version = PSCI_VERSION(0, 0);
 u32 kvm_host_psci_function_id[PSCI_FN_MAX];
+s64 hyp_physvirt_offset;
+
+#define __hyp_pa(x) ((phys_addr_t)(x) + hyp_physvirt_offset)
 
 static u64 get_psci_func_id(struct kvm_cpu_context *host_ctxt)
 {
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#20 lore raw

RFC PATCH 17/26 kvm: arm64: Bootstrap PSCI power state of host CPUs

In reply to David Brazdil

Proxying host's PSCI SMCs will require synchronizing CPU_ON/OFF/SUSPEND calls based on the observed state of individual cores. Add a per-CPU enum that tracks the power state of each core and initialize all CPUs online at the point of KVM init to ON.

---
 arch/arm64/include/asm/kvm_asm.h | 6 ++++++
 arch/arm64/include/asm/kvm_hyp.h | 1 +
 arch/arm64/kvm/arm.c             | 5 +++++
 arch/arm64/kvm/hyp/nvhe/psci.c   | 2 ++
 4 files changed, 14 insertions(+)
arch/arm64/include/asm/kvm_asm.h +6 -0
index 893327d1e449..9eecb37db6df 100644
@@ -157,6 +157,12 @@ struct kvm_nvhe_init_params {
 	unsigned long vector_ptr;
 };
 
+enum kvm_nvhe_psci_state {
+	KVM_NVHE_PSCI_CPU_OFF = 0,
+	KVM_NVHE_PSCI_CPU_PENDING_ON,
+	KVM_NVHE_PSCI_CPU_ON,
+};
+
 /* Translate a kernel address @ptr into its equivalent linear mapping */
 #define kvm_ksym_ref(ptr)						\
 	({								\
arch/arm64/include/asm/kvm_hyp.h +1 -0
index 95a2bbbcc7e1..cf4c1d16c3e0 100644
@@ -97,6 +97,7 @@ void deactivate_traps_vhe_put(void);
 u64 __guest_enter(struct kvm_vcpu *vcpu);
 
 #ifdef __KVM_NVHE_HYPERVISOR__
+void kvm_host_psci_cpu_init(void);
 bool kvm_host_psci_handler(struct kvm_cpu_context *host_ctxt);
 #endif
 
arch/arm64/kvm/arm.c +5 -0
index 580d4a656a7b..5b073806463e 100644
@@ -52,6 +52,7 @@ DECLARE_KVM_HYP_PER_CPU(unsigned long, kvm_hyp_vector);
 static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
 unsigned long kvm_arm_hyp_percpu_base[NR_CPUS];
 DECLARE_KVM_NVHE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
+DECLARE_KVM_NVHE_PER_CPU(enum kvm_nvhe_psci_state, psci_cpu_state);
 
 /* The VMID used in the VTTBR */
 static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
@@ -1517,10 +1518,14 @@ static void init_psci(void)
 {
 	extern u32 kvm_nvhe_sym(kvm_host_psci_version);
 	extern u32 kvm_nvhe_sym(kvm_host_psci_function_id)[PSCI_FN_MAX];
+	int cpu;
 
 	kvm_nvhe_sym(kvm_host_psci_version) = psci_driver_version;
 	memcpy(kvm_nvhe_sym(kvm_host_psci_function_id),
 		psci_function_id, sizeof(psci_function_id));
+
+	for_each_online_cpu(cpu)
+		*per_cpu_ptr_nvhe_sym(psci_cpu_state, cpu) = KVM_NVHE_PSCI_CPU_ON;
 }
 
 static int init_common_resources(void)
arch/arm64/kvm/hyp/nvhe/psci.c +2 -0
index 3eafcf48a29b..c3d0a6246c66 100644
@@ -20,6 +20,8 @@ s64 hyp_physvirt_offset;
 
 #define __hyp_pa(x) ((phys_addr_t)(x) + hyp_physvirt_offset)
 
+DEFINE_PER_CPU(enum kvm_nvhe_psci_state, psci_cpu_state);
+
 static u64 get_psci_func_id(struct kvm_cpu_context *host_ctxt)
 {
 	return host_ctxt->regs.regs[0];
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#21 lore raw

RFC PATCH 18/26 kvm: arm64: Intercept PSCI_CPU_OFF host SMC calls

In reply to David Brazdil

Add a handler of the CPU_OFF PSCI host SMC trapped in KVM nVHE hyp code. When invoked, it changes the recorded state of the core to OFF before forwarding the call to EL3. If the call fails, it changes the state back to ON and returns the error to the host.

---
 arch/arm64/kvm/hyp/nvhe/psci.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)
arch/arm64/kvm/hyp/nvhe/psci.c +29 -1
index c3d0a6246c66..00dc0cab860c 100644
@@ -13,6 +13,8 @@
 #include <kvm/arm_psci.h>
 #include <uapi/linux/psci.h>
 
+#include <nvhe/spinlock.h>
+
 /* Config options set by the host. */
 u32 kvm_host_psci_version = PSCI_VERSION(0, 0);
 u32 kvm_host_psci_function_id[PSCI_FN_MAX];
@@ -20,6 +22,7 @@ s64 hyp_physvirt_offset;
 
 #define __hyp_pa(x) ((phys_addr_t)(x) + hyp_physvirt_offset)
 
+static DEFINE_PER_CPU(hyp_spinlock_t, psci_cpu_lock);
 DEFINE_PER_CPU(enum kvm_nvhe_psci_state, psci_cpu_state);
 
 static u64 get_psci_func_id(struct kvm_cpu_context *host_ctxt)
@@ -76,9 +79,32 @@ static __noreturn unsigned long psci_forward_noreturn(struct kvm_cpu_context *ho
 	hyp_panic(); /* unreachable */
 }
 
+static int psci_cpu_off(u64 func_id, struct kvm_cpu_context *host_ctxt)
+{
+	hyp_spinlock_t *cpu_lock = this_cpu_ptr(&psci_cpu_lock);
+	enum kvm_nvhe_psci_state *cpu_power = this_cpu_ptr(&psci_cpu_state);
+	u32 power_state = (u32)host_ctxt->regs.regs[1];
+	int ret;
+
+	/* Change the recorded state to OFF before forwarding the call. */
+	hyp_spin_lock(cpu_lock);
+	*cpu_power = KVM_NVHE_PSCI_CPU_OFF;
+	hyp_spin_unlock(cpu_lock);
+
+	ret = psci_call(func_id, power_state, 0, 0);
+
+	/* Call was unsuccessful. Restore the recorded state and return to host. */
+	hyp_spin_lock(cpu_lock);
+	*cpu_power = KVM_NVHE_PSCI_CPU_ON;
+	hyp_spin_unlock(cpu_lock);
+	return ret;
+}
+
 static unsigned long psci_0_1_handler(u64 func_id, struct kvm_cpu_context *host_ctxt)
 {
-	if (func_id == kvm_host_psci_function_id[PSCI_FN_MIGRATE])
+	if (func_id == kvm_host_psci_function_id[PSCI_FN_CPU_OFF])
+		return psci_cpu_off(func_id, host_ctxt);
+	else if (func_id == kvm_host_psci_function_id[PSCI_FN_MIGRATE])
 		return psci_forward(host_ctxt);
 	else
 		return PSCI_RET_NOT_SUPPORTED;
@@ -97,6 +123,8 @@ static unsigned long psci_0_2_handler(u64 func_id, struct kvm_cpu_context *host_
 	case PSCI_0_2_FN_SYSTEM_RESET:
 		psci_forward_noreturn(host_ctxt);
 		unreachable();
+	case PSCI_0_2_FN_CPU_OFF:
+		return psci_cpu_off(func_id, host_ctxt);
 	default:
 		return PSCI_RET_NOT_SUPPORTED;
 	}
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
maintainer
#22 lore raw

Re: [RFC PATCH 18/26] kvm: arm64: Intercept PSCI_CPU_OFF host SMC calls

Quoted 38 lines · David Brazdil

Add a handler of the CPU_OFF PSCI host SMC trapped in KVM nVHE hyp code. When invoked, it changes the recorded state of the core to OFF before forwarding the call to EL3. If the call fails, it changes the state back to ON and returns the error to the host.

---
 arch/arm64/kvm/hyp/nvhe/psci.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)
arch/arm64/kvm/hyp/nvhe/psci.c +3 -0
index c3d0a6246c66..00dc0cab860c 100644
@@ -13,6 +13,8 @@
 #include <kvm/arm_psci.h>
 #include <uapi/linux/psci.h>
 
+#include <nvhe/spinlock.h>
+
 /* Config options set by the host. */
 u32 kvm_host_psci_version = PSCI_VERSION(0, 0);
 u32 kvm_host_psci_function_id[PSCI_FN_MAX];
@@ -20,6 +22,7 @@ s64 hyp_physvirt_offset;
 
 #define __hyp_pa(x) ((phys_addr_t)(x) + hyp_physvirt_offset)
 
+static DEFINE_PER_CPU(hyp_spinlock_t, psci_cpu_lock);
 DEFINE_PER_CPU(enum kvm_nvhe_psci_state, psci_cpu_state);
 
 static u64 get_psci_func_id(struct kvm_cpu_context *host_ctxt)
@@ -76,9 +79,32 @@ static __noreturn unsigned long

psci_forward_noreturn(struct kvm_cpu_context *ho

arch/arm64/kvm/hyp/nvhe/psci.c +1 -0
 	hyp_panic(); /* unreachable */
 }
 
+static int psci_cpu_off(u64 func_id, struct kvm_cpu_context 

*host_ctxt)

arch/arm64/kvm/hyp/nvhe/psci.c static __noreturn unsigned long psci_forward_noreturn(struct kvm_cpu_context *ho · line 92

Quoted 10 lines
arch/arm64/kvm/hyp/nvhe/psci.c +10 -0
+{
+	hyp_spinlock_t *cpu_lock = this_cpu_ptr(&psci_cpu_lock);
+	enum kvm_nvhe_psci_state *cpu_power = this_cpu_ptr(&psci_cpu_state);
+	u32 power_state = (u32)host_ctxt->regs.regs[1];
+	int ret;
+
+	/* Change the recorded state to OFF before forwarding the call. */
+	hyp_spin_lock(cpu_lock);
+	*cpu_power = KVM_NVHE_PSCI_CPU_OFF;
+	hyp_spin_unlock(cpu_lock);

So at this point, another CPU can observe the vcpu being "off", and issue a PSCI_ON, which may result in an "already on". I'm not sure this is an actual issue, but it is worth documenting.

What is definitely missing is a rational about *why* we need to track the state of the vcpus. I naively imagined that we could directly proxy the PSCI calls to EL3, only repainting PC for PSCI_ON.

Thanks,

        M.
Signature · 5 lines
Jazz is not dead. It just smells funny...
_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#23 lore raw

Re: [RFC PATCH 18/26] kvm: arm64: Intercept PSCI_CPU_OFF host SMC calls

Hi Marc,

Quoted 25 lines
Quoted 10 lines
arch/arm64/kvm/hyp/nvhe/psci.c +1 -0
+static DEFINE_PER_CPU(hyp_spinlock_t, psci_cpu_lock);
 DEFINE_PER_CPU(enum kvm_nvhe_psci_state, psci_cpu_state);
 
 static u64 get_psci_func_id(struct kvm_cpu_context *host_ctxt)
@@ -76,9 +79,32 @@ static __noreturn unsigned long

psci_forward_noreturn(struct kvm_cpu_context *ho

arch/arm64/kvm/hyp/nvhe/psci.c +1 -0
 	hyp_panic(); /* unreachable */
 }
 
+static int psci_cpu_off(u64 func_id, struct kvm_cpu_context *host_ctxt)

arch/arm64/kvm/hyp/nvhe/psci.c static __noreturn unsigned long psci_forward_noreturn(struct kvm_cpu_context *ho · line 92

Quoted 10 lines
arch/arm64/kvm/hyp/nvhe/psci.c +10 -0
+{
+	hyp_spinlock_t *cpu_lock = this_cpu_ptr(&psci_cpu_lock);
+	enum kvm_nvhe_psci_state *cpu_power = this_cpu_ptr(&psci_cpu_state);
+	u32 power_state = (u32)host_ctxt->regs.regs[1];
+	int ret;
+
+	/* Change the recorded state to OFF before forwarding the call. */
+	hyp_spin_lock(cpu_lock);
+	*cpu_power = KVM_NVHE_PSCI_CPU_OFF;
+	hyp_spin_unlock(cpu_lock);

So at this point, another CPU can observe the vcpu being "off", and issue a PSCI_ON, which may result in an "already on". I'm not sure this is an actual issue, but it is worth documenting.

Quoted 3 lines

What is definitely missing is a rational about *why* we need to track the state of the vcpus. I naively imagined that we could directly proxy the PSCI calls to EL3, only repainting PC for PSCI_ON.

I think I've solved that particular problem by *not* using cpu_power for AFFINITY_INFO. It's used only for resolving the race between CPU_ON/OFF. You are, however, right that perhaps that is not needed either and resolving the race should be left to the host. In that case the hypervisor would be just repainting the CPU_ON/SUSPEND args, as you said.

#24 lore raw

RFC PATCH 19/26 kvm: arm64: Extract __do_hyp_init into a helper function

In reply to David Brazdil

In preparation for adding a CPU entry point in nVHE hyp code, extract most of __do_hyp_init hypervisor initialization code into a common helper function. This will be invoked by the entry point to install KVM on the newly booted CPU.

---
 arch/arm64/kvm/hyp/nvhe/hyp-init.S | 39 +++++++++++++++++++++---------
 1 file changed, 28 insertions(+), 11 deletions(-)
arch/arm64/kvm/hyp/nvhe/hyp-init.S +28 -11
index 6f3ac5d428ec..1726cc44b3ee 100644
@@ -68,16 +68,35 @@ __do_hyp_init:
 	mov	x0, #SMCCC_RET_NOT_SUPPORTED
 	eret
 
-1:	ldr	x0, [x1, #NVHE_INIT_TPIDR_EL2]
-	msr	tpidr_el2, x0
+1:	mov	x0, x1
+	mov	x4, lr
+	bl	___kvm_hyp_init
+	mov	lr, x4
 
-	ldr	x0, [x1, #NVHE_INIT_STACK_PTR]
-	mov	sp, x0
+	/* Hello, World! */
+	mov	x0, #SMCCC_RET_SUCCESS
+	eret
+SYM_CODE_END(__kvm_hyp_init)
+
+/*
+ * Initialize the hypervisor in EL2.
+ *
+ * Only modifies x0..x3 so as to not clobber callee-saved SMCCC registers
+ * and leave x4 for the caller.
+ *
+ * x0: struct kvm_nvhe_init_params PA
+ */
+SYM_CODE_START(___kvm_hyp_init)
+	ldr	x1, [x0, #NVHE_INIT_TPIDR_EL2]
+	msr	tpidr_el2, x1
+
+	ldr	x1, [x0, #NVHE_INIT_STACK_PTR]
+	mov	sp, x1
 
-	ldr	x0, [x1, #NVHE_INIT_VECTOR_PTR]
-	msr	vbar_el2, x0
+	ldr	x1, [x0, #NVHE_INIT_VECTOR_PTR]
+	msr	vbar_el2, x1
 
-	ldr	x1, [x1, #NVHE_INIT_PGD_PTR]
+	ldr	x1, [x0, #NVHE_INIT_PGD_PTR]
 	phys_to_ttbr x0, x1
 alternative_if ARM64_HAS_CNP
 	orr	x0, x0, #TTBR_CNP_BIT
@@ -137,10 +156,8 @@ alternative_else_nop_endif
 	msr	sctlr_el2, x0
 	isb
 
-	/* Hello, World! */
-	mov	x0, #SMCCC_RET_SUCCESS
-	eret
-SYM_CODE_END(__kvm_hyp_init)
+	ret
+SYM_CODE_END(___kvm_hyp_init)
 
 SYM_CODE_START(__kvm_handle_stub_hvc)
 	cmp	x0, #HVC_SOFT_RESTART
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#25 lore raw

RFC PATCH 20/26 kvm: arm64: Add CPU entry point in nVHE hyp

In reply to David Brazdil

When nVHE hyp starts interception host's PSCI CPU_ON SMCs, it will need to install KVM on the newly booted CPU before returning to the host. Add an entry point which expects the same kvm_nvhe_init_params struct as the __kvm_hyp_init HVC in the CPU_ON context argument (x0).

The entry point initializes EL2 state with the same init_el2_state macro used by the kernel's entry point. It then initializes KVM using the same helper function used in the __kvm_hyp_init HVC.

When done, the entry point branches to a function provided in the init params.

---
 arch/arm64/include/asm/kvm_asm.h   |  1 +
 arch/arm64/kernel/asm-offsets.c    |  1 +
 arch/arm64/kvm/hyp/nvhe/hyp-init.S | 30 ++++++++++++++++++++++++++++++
 3 files changed, 32 insertions(+)
arch/arm64/include/asm/kvm_asm.h +1 -0
index 9eecb37db6df..8350b95ce94e 100644
@@ -155,6 +155,7 @@ struct kvm_nvhe_init_params {
 	unsigned long tpidr_el2;
 	unsigned long hyp_stack_ptr;
 	unsigned long vector_ptr;
+	unsigned long psci_cpu_entry_fn;
 };
 
 enum kvm_nvhe_psci_state {
arch/arm64/kernel/asm-offsets.c +1 -0
index 0cbb86135c7c..ffc84e68ad97 100644
@@ -114,6 +114,7 @@ int main(void)
   DEFINE(NVHE_INIT_TPIDR_EL2,	offsetof(struct kvm_nvhe_init_params, tpidr_el2));
   DEFINE(NVHE_INIT_STACK_PTR,	offsetof(struct kvm_nvhe_init_params, hyp_stack_ptr));
   DEFINE(NVHE_INIT_VECTOR_PTR,	offsetof(struct kvm_nvhe_init_params, vector_ptr));
+  DEFINE(NVHE_INIT_PSCI_CPU_ENTRY_FN,	offsetof(struct kvm_nvhe_init_params, psci_cpu_entry_fn));
 #endif
 #ifdef CONFIG_CPU_PM
   DEFINE(CPU_CTX_SP,		offsetof(struct cpu_suspend_ctx, sp));
arch/arm64/kvm/hyp/nvhe/hyp-init.S +30 -0
index 1726cc44b3ee..dd297a1a8f82 100644
@@ -6,6 +6,7 @@
 
 #include <linux/arm-smccc.h>
 #include <linux/linkage.h>
+#include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/alternative.h>
 #include <asm/assembler.h>
@@ -159,6 +160,35 @@ alternative_else_nop_endif
 	ret
 SYM_CODE_END(___kvm_hyp_init)
 
+SYM_CODE_START(__kvm_hyp_cpu_entry)
+	msr	SPsel, #1			// We want to use SP_EL{1,2}
+
+	/*
+	 * Check that the core was booted in EL2. Loop indefinitely if not
+	 * because it cannot be safely given to the host without installing KVM.
+	 */
+	mrs	x1, CurrentEL
+	cmp	x1, #CurrentEL_EL2
+	b.ne	.
+
+	/* Initialize EL2 CPU state to sane values. */
+	mov	x29, x0
+	init_el2_state nvhe
+	mov	x0, x29
+
+	/*
+	 * Load hyp VA of C entry function. Must do so before switching on the
+	 * MMU because the struct pointer is PA and not identity-mapped in hyp.
+	 */
+	ldr	x29, [x0, #NVHE_INIT_PSCI_CPU_ENTRY_FN]
+
+	/* Enable MMU, set vectors and stack. */
+	bl	___kvm_hyp_init
+
+	/* Leave idmap. */
+	br	x29
+SYM_CODE_END(__kvm_hyp_cpu_entry)
+
 SYM_CODE_START(__kvm_handle_stub_hvc)
 	cmp	x0, #HVC_SOFT_RESTART
 	b.ne	1f
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#26 lore raw

RFC PATCH 21/26 kvm: arm64: Add function to enter host from KVM nVHE hyp code

In reply to David Brazdil

All nVHE hyp code is currently executed as handlers of host's HVCs. This will change as nVHE starts intercepting host's PSCI CPU_ON SMCs. The newly booted CPU will need to initialize EL2 state and then enter the host. Add __host_enter function that branches into the existing host state-restoring code after the trap handler would have returned.

---
 arch/arm64/kvm/hyp/nvhe/host.S | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/arm64/kvm/hyp/nvhe/host.S +9 -0
index ed27f06a31ba..ff04d7115eab 100644
@@ -41,6 +41,7 @@ SYM_FUNC_START(__host_exit)
 	bl	handle_trap
 
 	/* Restore host regs x0-x17 */
+__host_enter_restore_full:
 	ldp	x0, x1,   [x29, #CPU_XREG_OFFSET(0)]
 	ldp	x2, x3,   [x29, #CPU_XREG_OFFSET(2)]
 	ldp	x4, x5,   [x29, #CPU_XREG_OFFSET(4)]
@@ -63,6 +64,14 @@ __host_enter_without_restoring:
 	sb
 SYM_FUNC_END(__host_exit)
 
+/*
+ * void __noreturn __host_enter(struct kvm_cpu_context *host_ctxt);
+ */
+SYM_FUNC_START(__host_enter)
+	mov	x29, x0
+	b	__host_enter_restore_full
+SYM_FUNC_END(__host_enter)
+
 /*
  * void __noreturn __hyp_do_panic(bool restore_host, u64 spsr, u64 elr, u64 par);
  */
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#27 lore raw

RFC PATCH 22/26 kvm: arm64: Intercept PSCI_CPU_ON host SMC calls

In reply to David Brazdil

Add a handler of the CPU_ON PSCI call from host. When invoked, it looks up the logical CPU ID corresponding to the provided MPIDR and populates the state struct of the target CPU with the provided x0, pc. It then calls CPU_ON itself, with an entry point in hyp that initializes EL2 state before returning ERET to the provided PC in EL1.

---
 arch/arm64/include/asm/kvm_hyp.h |   1 +
 arch/arm64/kvm/arm.c             |   3 +
 arch/arm64/kvm/hyp/nvhe/psci.c   | 113 +++++++++++++++++++++++++++++++
 3 files changed, 117 insertions(+)
arch/arm64/include/asm/kvm_hyp.h +1 -0
index cf4c1d16c3e0..2d88a2dad4de 100644
@@ -97,6 +97,7 @@ void deactivate_traps_vhe_put(void);
 u64 __guest_enter(struct kvm_vcpu *vcpu);
 
 #ifdef __KVM_NVHE_HYPERVISOR__
+asmlinkage void __noreturn kvm_host_psci_cpu_entry(void);
 void kvm_host_psci_cpu_init(void);
 bool kvm_host_psci_handler(struct kvm_cpu_context *host_ctxt);
 #endif
arch/arm64/kvm/arm.c +3 -0
index 5b073806463e..166975999ead 100644
@@ -1334,6 +1334,7 @@ static int kvm_map_vectors(void)
 
 static void cpu_init_hyp_mode(void)
 {
+	DECLARE_KVM_NVHE_SYM(kvm_host_psci_cpu_entry);
 	struct kvm_nvhe_init_params *params = this_cpu_ptr_nvhe_sym(kvm_init_params);
 	struct arm_smccc_res res;
 
@@ -1351,6 +1352,8 @@ static void cpu_init_hyp_mode(void)
 	params->pgd_ptr = kvm_mmu_get_httbr();
 	params->vector_ptr = (unsigned long)kern_hyp_va(kvm_ksym_ref(__kvm_hyp_host_vector));
 	params->hyp_stack_ptr = kern_hyp_va(__this_cpu_read(kvm_arm_hyp_stack_page) + PAGE_SIZE);
+	params->psci_cpu_entry_fn = (unsigned long)kern_hyp_va(
+		kvm_ksym_ref(CHOOSE_NVHE_SYM(kvm_host_psci_cpu_entry)));
 
 	/*
 	 * Flush the init params from the data cache because the struct will
arch/arm64/kvm/hyp/nvhe/psci.c +113 -0

159 lines not on this page · raw message

Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#28 lore raw

RFC PATCH 23/26 kvm: arm64: Intercept host's CPU_SUSPEND PSCI SMCs

In reply to David Brazdil

Add a handler of CPU_SUSPEND host PSCI SMCs. When invoked, it determines whether the requested power state loses context, ie. whether it is indistinguishable from a WHI or whether it is a deeper sleep state that behaves like a CPU_OFF+CPU_ON.

If it's the former, it forwards the call to EL3 and returns to the host after waking up.

If it's the latter, it saves r0,pc of the host into and makes the same call to EL3 with the hyp CPU entry point. When the core wakes up, EL2 state is initialized before dropping back to EL1.

---
 arch/arm64/kvm/arm.c           |  2 ++
 arch/arm64/kvm/hyp/nvhe/psci.c | 49 +++++++++++++++++++++++++++++++++-
 drivers/firmware/psci/psci.c   |  9 -------
 include/uapi/linux/psci.h      |  7 +++++
 4 files changed, 57 insertions(+), 10 deletions(-)
arch/arm64/kvm/arm.c +2 -0
index 166975999ead..6fbda652200b 100644
@@ -1521,9 +1521,11 @@ static void init_psci(void)
 {
 	extern u32 kvm_nvhe_sym(kvm_host_psci_version);
 	extern u32 kvm_nvhe_sym(kvm_host_psci_function_id)[PSCI_FN_MAX];
+	extern u32 kvm_nvhe_sym(kvm_host_psci_cpu_suspend_feature);
 	int cpu;
 
 	kvm_nvhe_sym(kvm_host_psci_version) = psci_driver_version;
+	kvm_nvhe_sym(kvm_host_psci_cpu_suspend_feature) = psci_cpu_suspend_feature;
 	memcpy(kvm_nvhe_sym(kvm_host_psci_function_id),
 		psci_function_id, sizeof(psci_function_id));
 
arch/arm64/kvm/hyp/nvhe/psci.c +48 -1

79 lines not on this page · raw message

drivers/firmware/psci/psci.c +0 -9
index b6ad237b1518..387e24409da7 100644
@@ -62,15 +62,6 @@ static psci_fn *invoke_psci_fn;
 
 u32 psci_function_id[PSCI_FN_MAX];
 
-#define PSCI_0_2_POWER_STATE_MASK		\
-				(PSCI_0_2_POWER_STATE_ID_MASK | \
-				PSCI_0_2_POWER_STATE_TYPE_MASK | \
-				PSCI_0_2_POWER_STATE_AFFL_MASK)
-
-#define PSCI_1_0_EXT_POWER_STATE_MASK		\
-				(PSCI_1_0_EXT_POWER_STATE_ID_MASK | \
-				PSCI_1_0_EXT_POWER_STATE_TYPE_MASK)
-
 u32 psci_cpu_suspend_feature;
 static bool psci_system_reset2_supported;
 
include/uapi/linux/psci.h +7 -0
index 0d52b8dbe8c2..df3d85ce86f7 100644
@@ -65,6 +65,10 @@
 #define PSCI_0_2_POWER_STATE_AFFL_SHIFT		24
 #define PSCI_0_2_POWER_STATE_AFFL_MASK		\
 				(0x3 << PSCI_0_2_POWER_STATE_AFFL_SHIFT)
+#define PSCI_0_2_POWER_STATE_MASK					\
+				(PSCI_0_2_POWER_STATE_ID_MASK |		\
+				 PSCI_0_2_POWER_STATE_TYPE_MASK |	\
+				 PSCI_0_2_POWER_STATE_AFFL_MASK)
 
 /* PSCI extended power state encoding for CPU_SUSPEND function */
 #define PSCI_1_0_EXT_POWER_STATE_ID_MASK	0xfffffff
@@ -72,6 +76,9 @@
 #define PSCI_1_0_EXT_POWER_STATE_TYPE_SHIFT	30
 #define PSCI_1_0_EXT_POWER_STATE_TYPE_MASK	\
 				(0x1 << PSCI_1_0_EXT_POWER_STATE_TYPE_SHIFT)
+#define PSCI_1_0_EXT_POWER_STATE_MASK					\
+				(PSCI_1_0_EXT_POWER_STATE_ID_MASK |	\
+				 PSCI_1_0_EXT_POWER_STATE_TYPE_MASK)
 
 /* PSCI v0.2 affinity level state returned by AFFINITY_INFO */
 #define PSCI_0_2_AFFINITY_LEVEL_ON		0
Signature · 1 line
2.29.1.341.ge80a0c044ae-goog
#29 lore raw

Re: [RFC PATCH 23/26] kvm: arm64: Intercept host's CPU_SUSPEND PSCI SMCs

Quoted 4 lines · David Brazdil' via kernel-team

Add a handler of CPU_SUSPEND host PSCI SMCs. When invoked, it determines whether the requested power state loses context, ie. whether it is indistinguishable from a WHI or whether it is a deeper sleep state that

Do you mean WFI?

Quoted 172 lines

behaves like a CPU_OFF+CPU_ON.

If it's the former, it forwards the call to EL3 and returns to the host after waking up.

If it's the latter, it saves r0,pc of the host into and makes the same call to EL3 with the hyp CPU entry point. When the core wakes up, EL2 state is initialized before dropping back to EL1.

---
 arch/arm64/kvm/arm.c           |  2 ++
 arch/arm64/kvm/hyp/nvhe/psci.c | 49 +++++++++++++++++++++++++++++++++-
 drivers/firmware/psci/psci.c   |  9 -------
 include/uapi/linux/psci.h      |  7 +++++
 4 files changed, 57 insertions(+), 10 deletions(-)
arch/arm64/kvm/arm.c +2 -0
index 166975999ead..6fbda652200b 100644
@@ -1521,9 +1521,11 @@ static void init_psci(void)
 {
        extern u32 kvm_nvhe_sym(kvm_host_psci_version);
        extern u32 kvm_nvhe_sym(kvm_host_psci_function_id)[PSCI_FN_MAX];
+       extern u32 kvm_nvhe_sym(kvm_host_psci_cpu_suspend_feature);
        int cpu;
 
        kvm_nvhe_sym(kvm_host_psci_version) = psci_driver_version;
+       kvm_nvhe_sym(kvm_host_psci_cpu_suspend_feature) = psci_cpu_suspend_feature;
        memcpy(kvm_nvhe_sym(kvm_host_psci_function_id),
                psci_function_id, sizeof(psci_function_id));
 
arch/arm64/kvm/hyp/nvhe/psci.c +48 -1
index 42ee5effa827..4899c8319bb4 100644
@@ -21,6 +21,7 @@
 /* Config options set by the host. */
 u32 kvm_host_psci_version = PSCI_VERSION(0, 0);
 u32 kvm_host_psci_function_id[PSCI_FN_MAX];
+u32 kvm_host_psci_cpu_suspend_feature;
 s64 hyp_physvirt_offset;
 
 #define __hyp_pa(x) ((phys_addr_t)(x) + hyp_physvirt_offset)
@@ -83,6 +84,20 @@ static __noreturn unsigned long psci_forward_noreturn(struct kvm_cpu_context *ho
        hyp_panic(); /* unreachable */
 }
 
+static bool psci_has_ext_power_state(void)
+{
+       return kvm_host_psci_cpu_suspend_feature & PSCI_1_0_FEATURES_CPU_SUSPEND_PF_MASK;
+}
+
+static bool psci_power_state_loses_context(u32 state)
+{
+       const u32 mask = psci_has_ext_power_state() ?
+                                       PSCI_1_0_EXT_POWER_STATE_TYPE_MASK :
+                                       PSCI_0_2_POWER_STATE_TYPE_MASK;
+
+       return state & mask;
+}
+
 static unsigned int find_cpu_id(u64 mpidr)
 {
        int i;
@@ -106,6 +121,34 @@ static phys_addr_t cpu_entry_pa(void)
        return kern_va - kimage_voffset;
 }
 
+static int psci_cpu_suspend(u64 func_id, struct kvm_cpu_context *host_ctxt)
+{
+       u64 power_state = host_ctxt->regs.regs[1];
+       unsigned long pc = host_ctxt->regs.regs[2];
+       unsigned long r0 = host_ctxt->regs.regs[3];
+       hyp_spinlock_t *cpu_lock;
+       struct vcpu_reset_state *cpu_reset;
+       struct kvm_nvhe_init_params *cpu_params;
+
+       if (!psci_power_state_loses_context(power_state)) {
+               /* This power state has the same semantics as WFI. */
+               return psci_call(PSCI_0_2_FN64_CPU_SUSPEND, 0, 0, 0);
+       }
+
+       cpu_lock = this_cpu_ptr(&psci_cpu_lock);
+       cpu_reset = this_cpu_ptr(&psci_cpu_reset);
+       cpu_params = this_cpu_ptr(&kvm_init_params);
+
+       /* Resuming from this state has the same semantics as CPU_ON. */
+       hyp_spin_lock(cpu_lock);
+       *cpu_reset = (struct vcpu_reset_state){
+               .pc = pc,
+               .r0 = r0,
+       };
+       hyp_spin_unlock(cpu_lock);
+       return psci_call(func_id, power_state, cpu_entry_pa(), __hyp_pa(cpu_params));
+}
+
 static int psci_cpu_off(u64 func_id, struct kvm_cpu_context *host_ctxt)
 {
        hyp_spinlock_t *cpu_lock = this_cpu_ptr(&psci_cpu_lock);
@@ -193,7 +236,9 @@ static int psci_cpu_on(u64 func_id, struct kvm_cpu_context *host_ctxt)
 
 static unsigned long psci_0_1_handler(u64 func_id, struct kvm_cpu_context *host_ctxt)
 {
-       if (func_id == kvm_host_psci_function_id[PSCI_FN_CPU_OFF])
+       if (func_id == kvm_host_psci_function_id[PSCI_FN_CPU_SUSPEND])
+               return psci_cpu_suspend(func_id, host_ctxt);
+       else if (func_id == kvm_host_psci_function_id[PSCI_FN_CPU_OFF])
                return psci_cpu_off(func_id, host_ctxt);
        else if (func_id == kvm_host_psci_function_id[PSCI_FN_CPU_ON])
                return psci_cpu_on(func_id, host_ctxt);
@@ -216,6 +261,8 @@ static unsigned long psci_0_2_handler(u64 func_id, struct kvm_cpu_context *host_
        case PSCI_0_2_FN_SYSTEM_RESET:
                psci_forward_noreturn(host_ctxt);
                unreachable();
+       case PSCI_0_2_FN64_CPU_SUSPEND:
+               return psci_cpu_suspend(func_id, host_ctxt);
        case PSCI_0_2_FN_CPU_OFF:
                return psci_cpu_off(func_id, host_ctxt);
        case PSCI_0_2_FN64_CPU_ON:
drivers/firmware/psci/psci.c +0 -9
index b6ad237b1518..387e24409da7 100644
@@ -62,15 +62,6 @@ static psci_fn *invoke_psci_fn;
 
 u32 psci_function_id[PSCI_FN_MAX];
 
-#define PSCI_0_2_POWER_STATE_MASK              \
-                               (PSCI_0_2_POWER_STATE_ID_MASK | \
-                               PSCI_0_2_POWER_STATE_TYPE_MASK | \
-                               PSCI_0_2_POWER_STATE_AFFL_MASK)
-
-#define PSCI_1_0_EXT_POWER_STATE_MASK          \
-                               (PSCI_1_0_EXT_POWER_STATE_ID_MASK | \
-                               PSCI_1_0_EXT_POWER_STATE_TYPE_MASK)
-
 u32 psci_cpu_suspend_feature;
 static bool psci_system_reset2_supported;
 
include/uapi/linux/psci.h +7 -1
index 0d52b8dbe8c2..df3d85ce86f7 100644
@@ -65,6 +65,10 @@
 #define PSCI_0_2_POWER_STATE_AFFL_SHIFT                24
 #define PSCI_0_2_POWER_STATE_AFFL_MASK         \
                                (0x3 << PSCI_0_2_POWER_STATE_AFFL_SHIFT)
+#define PSCI_0_2_POWER_STATE_MASK                                      \
+                               (PSCI_0_2_POWER_STATE_ID_MASK |         \
+                                PSCI_0_2_POWER_STATE_TYPE_MASK |       \
+                                PSCI_0_2_POWER_STATE_AFFL_MASK)
 
 /* PSCI extended power state encoding for CPU_SUSPEND function */
 #define PSCI_1_0_EXT_POWER_STATE_ID_MASK       0xfffffff
@@ -72,6 +76,9 @@
 #define PSCI_1_0_EXT_POWER_STATE_TYPE_SHIFT    30
 #define PSCI_1_0_EXT_POWER_STATE_TYPE_MASK     \
                                (0x1 << PSCI_1_0_EXT_POWER_STATE_TYPE_SHIFT)
+#define PSCI_1_0_EXT_POWER_STATE_MASK                                  \
+                               (PSCI_1_0_EXT_POWER_STATE_ID_MASK |     \
+                                PSCI_1_0_EXT_POWER_STATE_TYPE_MASK)
 
 /* PSCI v0.2 affinity level state returned by AFFINITY_INFO */
 #define PSCI_0_2_AFFINITY_LEVEL_ON             0
--

2.29.1.341.ge80a0c044ae-goog

--
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].

#30 lore raw

Re: [RFC PATCH 23/26] kvm: arm64: Intercept host's CPU_SUSPEND PSCI SMCs

Quoted 4 lines
Quoted 3 lines

Add a handler of CPU_SUSPEND host PSCI SMCs. When invoked, it determines whether the requested power state loses context, ie. whether it is indistinguishable from a WHI or whether it is a deeper sleep state that

Do you mean WFI?

Of course, sorry, just a typo.

#31 lore raw

RFC PATCH 24/26 kvm: arm64: Keep nVHE EL2 vector installed

In reply to David Brazdil

KVM by default keeps the stub vector installed and installs the nVHE vector only briefly for init and later on demand. Change this policy to install the vector at init and then never uninstall it.

---
 arch/arm64/kvm/arm.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)
arch/arm64/kvm/arm.c +13 -4
index 6fbda652200b..3dff6af69eca 100644
@@ -64,6 +64,11 @@ static bool vgic_present;
 static DEFINE_PER_CPU(unsigned char, kvm_arm_hardware_enabled);
 DEFINE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
 
+static bool keep_hyp_installed(void)
+{
+	return !is_kernel_in_hyp_mode();
+}
+
 int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
 {
 	return kvm_vcpu_exiting_guest_mode(vcpu) == IN_GUEST_MODE;
@@ -1430,7 +1435,8 @@ static void _kvm_arch_hardware_disable(void *discard)
 
 void kvm_arch_hardware_disable(void)
 {
-	_kvm_arch_hardware_disable(NULL);
+	if (!keep_hyp_installed())
+		_kvm_arch_hardware_disable(NULL);
 }
 
 #ifdef CONFIG_CPU_PM
@@ -1473,11 +1479,13 @@ static struct notifier_block hyp_init_cpu_pm_nb = {
 
 static void __init hyp_cpu_pm_init(void)
 {
-	cpu_pm_register_notifier(&hyp_init_cpu_pm_nb);
+	if (!keep_hyp_installed())
+		cpu_pm_register_notifier(&hyp_init_cpu_pm_nb);
 }
 static void __init hyp_cpu_pm_exit(void)
 {
-	cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb);
+	if (!keep_hyp_installed())
+		cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb);
 }
 #else
 static inline void hyp_cpu_pm_init(void)
@@ -1580,7 +1588,8 @@ static int init_subsystems(void)
 	kvm_coproc_table_init();
 
 out:
-	on_each_cpu(_kvm_arch_hardware_disable, NULL, 1);
+	if (err || !keep_hyp_installed())
+		on_each_cpu(_kvm_arch_hardware_disable, NULL, 1);
 
 	return err;
 }
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#32 lore raw

RFC PATCH 25/26 kvm: arm64: Trap host SMCs

In reply to David Brazdil

While nVHE KVM is installed, start trapping all host SMCs. By default, these are simply forwarded to EL3, but PSCI SMCs are validated first.

Create new constant HCR_HOST_NVHE_STUB_FLAGS with the old set of HCR flags to use before the nVHE vector is installed or when switching back to stub vector.

Extend HCR_HOST_NVHE_FLAGS to contain HCR_TSC. Set HCR_EL2 to it before installing nVHE vector.

---
 arch/arm64/include/asm/kvm_arm.h   | 3 ++-
 arch/arm64/kernel/head.S           | 2 +-
 arch/arm64/kvm/hyp/nvhe/hyp-init.S | 6 ++++++
 3 files changed, 9 insertions(+), 2 deletions(-)
arch/arm64/include/asm/kvm_arm.h +2 -1
index 64ce29378467..04b862955f32 100644
@@ -79,7 +79,8 @@
 			 HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \
 			 HCR_FMO | HCR_IMO | HCR_PTW )
 #define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF)
-#define HCR_HOST_NVHE_FLAGS (HCR_RW | HCR_API | HCR_APK | HCR_ATA)
+#define HCR_HOST_NVHE_STUB_FLAGS (HCR_RW | HCR_API | HCR_APK | HCR_ATA)
+#define HCR_HOST_NVHE_FLAGS (HCR_HOST_NVHE_STUB_FLAGS | HCR_TSC)
 #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
 
 /* TCR_EL2 Registers bits */
arch/arm64/kernel/head.S +1 -1
index e7270b63abed..ea17413a04e0 100644
@@ -522,7 +522,7 @@ SYM_FUNC_START(el2_setup)
 #endif
 
 SYM_INNER_LABEL(el2_setup_nvhe, SYM_L_LOCAL)
-	mov_q	x0, HCR_HOST_NVHE_FLAGS
+	mov_q	x0, HCR_HOST_NVHE_STUB_FLAGS
 	msr	hcr_el2, x0
 	isb
 
arch/arm64/kvm/hyp/nvhe/hyp-init.S +6 -0
index dd297a1a8f82..97684deba6c1 100644
@@ -88,6 +88,10 @@ SYM_CODE_END(__kvm_hyp_init)
  * x0: struct kvm_nvhe_init_params PA
  */
 SYM_CODE_START(___kvm_hyp_init)
+	mov_q	x1, HCR_HOST_NVHE_FLAGS
+	msr	hcr_el2, x1
+	isb
+
 	ldr	x1, [x0, #NVHE_INIT_TPIDR_EL2]
 	msr	tpidr_el2, x1
 
@@ -220,6 +224,8 @@ reset:
 	bic	x5, x5, x6		// Clear SCTL_M and etc
 	pre_disable_mmu_workaround
 	msr	sctlr_el2, x5
+	mov_q	x5, HCR_HOST_NVHE_STUB_FLAGS
+	msr	hcr_el2, x5
 	isb
 
 	/* Install stub vectors */
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
#33 lore raw

RFC PATCH 26/26 kvm: arm64: Fix EL2 mode availability checks

In reply to David Brazdil

With nVHE hyp code interception host's PSCI CPU_ON/OFF/SUSPEND SMCs, from the host's perspective new CPUs start booting in EL1 while previously they would have booted in EL2. The kernel logic which keeps track of the mode CPUs were booted in needs to be adjusted to account for this fact.

Add a static key enabled if KVM nVHE initialization is successful.

When the key is enabled, is_hyp_mode_available continues to report true because its users either treat it a check whether KVM will be / has been initialized, or whether stub HVCs can be made (eg. hibernate).

is_hyp_mode_mismatched is changed to report false when the key is enabled. That's because all cores' modes matched at the point of KVM init and KVM will not allow cores not present at init to boot. That said, the function is never used after KVM is initialized.

---
 arch/arm64/include/asm/virt.h | 16 ++++++++++++++++
 arch/arm64/kvm/arm.c          |  5 +++++
 2 files changed, 21 insertions(+)
arch/arm64/include/asm/virt.h +16 -0
index 6069be50baf9..597430b5f5aa 100644
@@ -65,9 +65,18 @@ extern u32 __boot_cpu_mode[2];
 void __hyp_set_vectors(phys_addr_t phys_vector_base);
 void __hyp_reset_vectors(void);
 
+DECLARE_STATIC_KEY_FALSE(kvm_nvhe_initialized);
+
 /* Reports the availability of HYP mode */
 static inline bool is_hyp_mode_available(void)
 {
+	/*
+	 * If KVM nVHE is initialized, all CPUs must have been booted in EL2.
+	 * Avoid checking __boot_cpu_mode as CPUs now come up in EL1.
+	 */
+	if (IS_ENABLED(CONFIG_KVM) && static_branch_unlikely(&kvm_nvhe_initialized))
+		return true;
+
 	return (__boot_cpu_mode[0] == BOOT_CPU_MODE_EL2 &&
 		__boot_cpu_mode[1] == BOOT_CPU_MODE_EL2);
 }
@@ -75,6 +84,13 @@ static inline bool is_hyp_mode_available(void)
 /* Check if the bootloader has booted CPUs in different modes */
 static inline bool is_hyp_mode_mismatched(void)
 {
+	/*
+	 * If KVM nVHE is initialized, all CPUs must have been booted in EL2.
+	 * Avoid checking __boot_cpu_mode as CPUs now come up in EL1.
+	 */
+	if (IS_ENABLED(CONFIG_KVM) && static_branch_unlikely(&kvm_nvhe_initialized))
+		return false;
+
 	return __boot_cpu_mode[0] != __boot_cpu_mode[1];
 }
 
arch/arm64/kvm/arm.c +5 -0
index 3dff6af69eca..e93956d6235d 100644
@@ -47,6 +47,8 @@
 __asm__(".arch_extension	virt");
 #endif
 
+DEFINE_STATIC_KEY_FALSE(kvm_nvhe_initialized);
+
 DECLARE_KVM_HYP_PER_CPU(unsigned long, kvm_hyp_vector);
 
 static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
@@ -1841,6 +1843,9 @@ int kvm_arch_init(void *opaque)
 	if (err)
 		goto out_hyp;
 
+	if (!in_hyp_mode)
+		static_branch_enable(&kvm_nvhe_initialized);
+
 	if (in_hyp_mode)
 		kvm_info("VHE mode initialized successfully\n");
 	else
Signature · 6 lines
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
maintainer
#34 lore raw
In reply to David Brazdil
Quoted 23 lines · David Brazdil

As we progress towards being able to keep guest state private to the host running nVHE hypervisor, this series allows the hypervisor to install itself on newly booted CPUs before the host is allowed to run on them.

To this end, the hypervisor starts trapping host SMCs and intercepting host's PSCI CPU_ON/OFF/SUSPEND calls. It replaces the host's entry point with its own, initializes the EL2 state of the new CPU and installs the nVHE hyp vector before ERETing to the host's entry point.

Other PSCI SMCs are forwarded to EL3, though only the known set of SMCs implemented in the kernel is allowed. Non-PSCI SMCs are also forwarded to EL3. Future changes will need to ensure the safety of all SMCs wrt. private guests.

The host is still allowed to reset EL2 back to the stub vector, eg. for hibernation or kexec, but will not disable nVHE when there are no VMs.

Tested on Rock Pi 4b.

Sending this as an RFC to get feedback on the following decisions:

Quoted 8 lines

1) The kernel checks new cores' features against the finalized system capabilities. To avoid the need to move this code/data to EL2, the implementation only allows to boot cores that were online at the time of KVM initialization.

2) Trapping and forwarding SMCs cannot be switched off. This could cause issues eg. if EL3 always returned to EL1. A kernel command line flag may be needed to turn the feature off on such platforms.

I'd rather have it the other way around (buy-in rather than turn off). On top of the potential issue with stupid EL3s, there is the issue that PSCI is optional, and that protected VMs won't be able to work without it. Another related thing is that EL3 itself is optional.

Note that this flag shouldn't be specific to PSCI proxying. It should also control Stage-2 wrapping, and the whole pKVM.

Thanks,

        M.
Signature · 1 line
Jazz is not dead. It just smells funny...