MIPS: Add support for more mscc SoCs: Luton, Serval and Jaguar2
Subsystems (4)
v2 cover MIPS: Add support for more mscc SoCs: Luton, Serval and Jaguar2
Hello,
Ocelot SoC belongs to a larger family of SoCs called VCoreIII. Luton, Serval and Jaguar2 are part of this family and are added with this series.
This the second version with a few changes in device tree.
To be able to run a linux kernel the irqchip support and the pinctrl support are needed. Two series of patches adding this support has been posted to their subsystem. However there is no build dependency between them.
Changelog:
v1 -> v2
- Moved the changes in binding documentation from patch 8 to 2
- Fixed i2c devices node name in jaguar2 device tree files
- Added Acked-by from Rob Herring
- Fixes few more devices tree nodes, now there is no more warning when running "make W=1 dtbs"
Gregory
Gregory CLEMENT (9):
dt-bindings: mips: Add Luton
dt-bindings: mips: Add Serval and Jaguar2
MIPS: mscc: Prepare configuration to handle more SoCs
MIPS: mscc: Fix configuration name for ocelot legacy boards
MIPS: mscc: Add luton dtsi
MIPS: mscc: Add luton PC0B91 device tree
MIPS: mscc: build FIT image for Luton
MIPS: mscc: Add jaguar2 support
MIPS: mscc: Add serval support
.../devicetree/bindings/mips/mscc.txt | 2 +- arch/mips/boot/dts/Makefile | 2 +- arch/mips/boot/dts/mscc/Makefile | 11 +- arch/mips/boot/dts/mscc/jaguar2.dtsi | 167 +++++++++++ arch/mips/boot/dts/mscc/jaguar2_common.dtsi | 25 ++ arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 267 ++++++++++++++++++ arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 107 +++++++ arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 57 ++++ arch/mips/boot/dts/mscc/luton.dtsi | 116 ++++++++ arch/mips/boot/dts/mscc/luton_pcb091.dts | 30 ++ arch/mips/boot/dts/mscc/serval.dtsi | 153 ++++++++++ arch/mips/boot/dts/mscc/serval_common.dtsi | 127 +++++++++ arch/mips/boot/dts/mscc/serval_pcb105.dts | 17 ++ arch/mips/boot/dts/mscc/serval_pcb106.dts | 17 ++ arch/mips/generic/Kconfig | 37 ++- arch/mips/generic/Platform | 3 + arch/mips/generic/board-jaguar2.its.S | 40 +++ arch/mips/generic/board-luton.its.S | 23 ++ arch/mips/generic/board-serval.its.S | 24 ++ 19 files changed, 1218 insertions(+), 7 deletions(-) create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts create mode 100644 arch/mips/boot/dts/mscc/luton.dtsi create mode 100644 arch/mips/boot/dts/mscc/luton_pcb091.dts create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts create mode 100644 arch/mips/generic/board-jaguar2.its.S create mode 100644 arch/mips/generic/board-luton.its.S create mode 100644 arch/mips/generic/board-serval.its.S
Signature · 1 line
2.28.0
PATCH v2 1/9 dt-bindings: mips: Add Luton
Luton SoC belongs to the same family as Ocelot.
--- Documentation/devicetree/bindings/mips/mscc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mips/mscc.txt +1 -1
@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following properties: Required properties: -- compatible: "mscc,ocelot" +- compatible: "mscc,ocelot" or "mscc,luton" * Other peripherals:
Signature · 1 line
2.28.0
Re: [PATCH v2 1/9] dt-bindings: mips: Add Luton
Quoted 4 lines · Gregory CLEMENT
Luton SoC belongs to the same family as Ocelot.
Acked-by Rob Herring <[email protected]>Signed-off-by Gregory CLEMENT <[email protected]>
Quoted 20 lines
--- Documentation/devicetree/bindings/mips/mscc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Documentation/devicetree/bindings/mips/mscc.txt +1
-1@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following properties: Required properties: -- compatible: "mscc,ocelot" +- compatible: "mscc,ocelot" or "mscc,luton" * Other peripherals:Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 2/9 dt-bindings: mips: Add Serval and Jaguar2
In reply to Gregory CLEMENTServal and Jaguar2 SoCs belong to the same family as Ocelot and Luton.
--- Documentation/devicetree/bindings/mips/mscc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mips/mscc.txt +1 -1
@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following properties: Required properties: -- compatible: "mscc,ocelot" or "mscc,luton" +- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2" * Other peripherals:
Signature · 1 line
2.28.0
Re: [PATCH v2 2/9] dt-bindings: mips: Add Serval and Jaguar2
Quoted 4 lines · Gregory CLEMENT
Serval and Jaguar2 SoCs belong to the same family as Ocelot and Luton.
Acked-by Rob Herring <[email protected]>Signed-off-by Gregory CLEMENT <[email protected]>
Quoted 20 lines
--- Documentation/devicetree/bindings/mips/mscc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Documentation/devicetree/bindings/mips/mscc.txt +1
-1@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following properties: Required properties: -- compatible: "mscc,ocelot" or "mscc,luton" +- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2" * Other peripherals:Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 3/9 MIPS: mscc: Prepare configuration to handle more SoCs
In reply to Gregory CLEMENTOcelot belongs to a family of SoC named the VCore III. In order to add these new Soc, use the new symbol SOC_VCOREIII instead of a one dedicated to Ocelot.
In order to avoid regression on driver building, the MSCC_OCELOT configuration symbol is kept until the driver will be converted.
--- arch/mips/boot/dts/Makefile | 2 +- arch/mips/boot/dts/mscc/Makefile | 2 +- arch/mips/generic/Kconfig | 11 ++++++++--- 3 files changed, 10 insertions(+), 5 deletions(-)
arch/mips/boot/dts/Makefile +1 -1
@@ -6,7 +6,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img subdir-$(CONFIG_MACH_INGENIC) += ingenic subdir-$(CONFIG_LANTIQ) += lantiq subdir-$(CONFIG_MACH_LOONGSON64) += loongson -subdir-$(CONFIG_MSCC_OCELOT) += mscc +subdir-$(CONFIG_SOC_VCOREIII) += mscc subdir-$(CONFIG_MIPS_MALTA) += mti subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti subdir-$(CONFIG_NLM_XLP_BOARD) += netlogic
arch/mips/boot/dts/mscc/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_MSCC_OCELOT) += ocelot_pcb123.dtb ocelot_pcb120.dtb +dtb-$(CONFIG_SOC_VCOREIII) += ocelot_pcb123.dtb ocelot_pcb120.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
arch/mips/generic/Kconfig +8 -3
@@ -34,14 +34,19 @@ config LEGACY_BOARD_OCELOT bool "Support MSCC Ocelot boards" depends on LEGACY_BOARD_SEAD3=n select LEGACY_BOARDS - select MSCC_OCELOT + select SOC_VCOREIII select SYS_HAS_EARLY_PRINTK select USE_GENERIC_EARLY_PRINTK_8250 -config MSCC_OCELOT +config SOC_VCOREIII bool select GPIOLIB select MSCC_OCELOT_IRQ + select MSCC_OCELOT #will be removed when driver no more use it + +#Will be removed when the driver using it will be converted to SOC_VCOREIII +config MSCC_OCELOT + bool comment "FIT/UHI Boards"
@@ -67,7 +72,7 @@ config FIT_IMAGE_FDT_XILFPGA config FIT_IMAGE_FDT_OCELOT bool "Include FDT for Microsemi Ocelot development platforms" - select MSCC_OCELOT + select SOC_VCOREIII help Enable this to include the FDT for the Ocelot development platforms from Microsemi in the FIT kernel image.
Signature · 1 line
2.28.0
Re: [PATCH v2 3/9] MIPS: mscc: Prepare configuration to handle more SoCs
Quoted 8 lines · Gregory CLEMENT
Ocelot belongs to a family of SoC named the VCore III. In order to add these new Soc, use the new symbol
SOC_VCOREIIIinstead of a one dedicated to Ocelot.In order to avoid regression on driver building, the
MSCC_OCELOTconfiguration symbol is kept until the driver will be converted.Signed-off-by Gregory CLEMENT <[email protected]>
Quoted 67 lines
--- arch/mips/boot/dts/Makefile | 2 +- arch/mips/boot/dts/mscc/Makefile | 2 +- arch/mips/generic/Kconfig | 11 ++++++++--- 3 files changed, 10 insertions(+), 5 deletions(-)arch/mips/boot/dts/Makefile +1
-1@@ -6,7 +6,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img subdir-$(CONFIG_MACH_INGENIC) += ingenic subdir-$(CONFIG_LANTIQ) += lantiq subdir-$(CONFIG_MACH_LOONGSON64) += loongson -subdir-$(CONFIG_MSCC_OCELOT) += mscc +subdir-$(CONFIG_SOC_VCOREIII) += mscc subdir-$(CONFIG_MIPS_MALTA) += mti subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti subdir-$(CONFIG_NLM_XLP_BOARD) += netlogicarch/mips/boot/dts/mscc/Makefile +1
-1@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_MSCC_OCELOT) += ocelot_pcb123.dtb ocelot_pcb120.dtb +dtb-$(CONFIG_SOC_VCOREIII) += ocelot_pcb123.dtb ocelot_pcb120.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))arch/mips/generic/Kconfig +8
-3@@ -34,14 +34,19 @@ config LEGACY_BOARD_OCELOT bool "Support MSCC Ocelot boards" depends on LEGACY_BOARD_SEAD3=n select LEGACY_BOARDS - select MSCC_OCELOT + select SOC_VCOREIII select SYS_HAS_EARLY_PRINTK select USE_GENERIC_EARLY_PRINTK_8250 -config MSCC_OCELOT +config SOC_VCOREIII bool select GPIOLIB select MSCC_OCELOT_IRQ + select MSCC_OCELOT #will be removed when driver no more use it + +#Will be removed when the driver using it will be converted to SOC_VCOREIII +config MSCC_OCELOT + bool comment "FIT/UHI Boards"@@ -67,7 +72,7 @@ config FIT_IMAGE_FDT_XILFPGA config FIT_IMAGE_FDT_OCELOT bool "Include FDT for Microsemi Ocelot development platforms" - select MSCC_OCELOT + select SOC_VCOREIII help Enable this to include the FDT for the Ocelot development platforms from Microsemi in the FIT kernel image.Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 4/9 MIPS: mscc: Fix configuration name for ocelot legacy boards
In reply to Gregory CLEMENTOcelots is supported by the generic MIPS build so make it clears that LEGACY_BOARD_OCELOT is only needed for legacy boards which didn't have bootloader supporting device tree.
--- arch/mips/generic/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/generic/Kconfig +1 -1
@@ -31,7 +31,7 @@ comment "MSCC Ocelot doesn't work with SEAD3 enabled" depends on LEGACY_BOARD_SEAD3 config LEGACY_BOARD_OCELOT - bool "Support MSCC Ocelot boards" + bool "Legacy support for Ocelot based boards" depends on LEGACY_BOARD_SEAD3=n select LEGACY_BOARDS select SOC_VCOREIII
Signature · 1 line
2.28.0
Re: [PATCH v2 4/9] MIPS: mscc: Fix configuration name for ocelot legacy boards
Quoted 5 lines · Gregory CLEMENT
Ocelots is supported by the generic MIPS build so make it clears that
LEGACY_BOARD_OCELOTis only needed for legacy boards which didn't have bootloader supporting device tree.Signed-off-by Gregory CLEMENT <[email protected]>
Quoted 20 lines
--- arch/mips/generic/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/mips/generic/Kconfig +1
-1@@ -31,7 +31,7 @@ comment "MSCC Ocelot doesn't work with SEAD3 enabled" depends on LEGACY_BOARD_SEAD3 config LEGACY_BOARD_OCELOT - bool "Support MSCC Ocelot boards" + bool "Legacy support for Ocelot based boards" depends on LEGACY_BOARD_SEAD3=n select LEGACY_BOARDS select SOC_VCOREIIISignature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 5/9 MIPS: mscc: Add luton dtsi
In reply to Gregory CLEMENTAdd a device tree include file for the Microsemi Luton SoC which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <[email protected]>.
--- arch/mips/boot/dts/mscc/luton.dtsi | 116 +++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 arch/mips/boot/dts/mscc/luton.dtsi
arch/mips/boot/dts/mscc/luton.dtsi new file +116 -0
@@ -0,0 +1,116 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020 Microsemi Corporation */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,luton"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart0; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <416666666>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb@60000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x60000000 0x20000000>; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@10000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x10000000 0x2c>; + }; + + intc: interrupt-controller@10000084 { + compatible = "mscc,luton-icpu-intr"; + reg = <0x10000084 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@10100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x10100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + i2c0: i2c@10100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x10100400 0x100>, <0x100002a4 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clocks = <&ahb_clk>; + + status = "disabled"; + }; + + gpio: pinctrl@70068 { + compatible = "mscc,luton-pinctrl"; + reg = <0x70068 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 32>; + interrupt-controller; + interrupts = <13>; + #interrupt-cells = <2>; + + i2c_pins: i2c-pins { + pins = "GPIO_5", "GPIO_6"; + function = "twi"; + }; + + uart_pins: uart-pins { + pins = "GPIO_30", "GPIO_31"; + function = "uart"; + }; + + }; + }; +};
Signature · 1 line
2.28.0
Re: [PATCH v2 5/9] MIPS: mscc: Add luton dtsi
Quoted 6 lines · Gregory CLEMENT
Add a device tree include file for the Microsemi Luton SoC which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <[email protected]>.
Signed-off-by Gregory CLEMENT <[email protected]>
Quoted 130 lines
--- arch/mips/boot/dts/mscc/luton.dtsi | 116 +++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 arch/mips/boot/dts/mscc/luton.dtsiarch/mips/boot/dts/mscc/luton.dtsi new file +116
-0@@ -0,0 +1,116 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020 Microsemi Corporation */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,luton"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart0; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <416666666>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb@60000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x60000000 0x20000000>; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@10000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x10000000 0x2c>; + }; + + intc: interrupt-controller@10000084 { + compatible = "mscc,luton-icpu-intr"; + reg = <0x10000084 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@10100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x10100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + i2c0: i2c@10100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x10100400 0x100>, <0x100002a4 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clocks = <&ahb_clk>; + + status = "disabled"; + }; + + gpio: pinctrl@70068 { + compatible = "mscc,luton-pinctrl"; + reg = <0x70068 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 32>; + interrupt-controller; + interrupts = <13>; + #interrupt-cells = <2>; + + i2c_pins: i2c-pins { + pins = "GPIO_5", "GPIO_6"; + function = "twi"; + }; + + uart_pins: uart-pins { + pins = "GPIO_30", "GPIO_31"; + function = "uart"; + }; + + }; + }; +};Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Re: [PATCH v2 5/9] MIPS: mscc: Add luton dtsi
In reply to Gregory CLEMENTQuoted 6 lines · Gregory CLEMENT
Add a device tree include file for the Microsemi Luton SoC which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <[email protected]>.
Signed-off-by Gregory CLEMENT <[email protected]>
Quoted 130 lines
--- arch/mips/boot/dts/mscc/luton.dtsi | 116 +++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 arch/mips/boot/dts/mscc/luton.dtsiarch/mips/boot/dts/mscc/luton.dtsi new file +116
-0@@ -0,0 +1,116 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020 Microsemi Corporation */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,luton"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart0; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <416666666>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb@60000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x60000000 0x20000000>; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@10000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x10000000 0x2c>; + }; + + intc: interrupt-controller@10000084 { + compatible = "mscc,luton-icpu-intr"; + reg = <0x10000084 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@10100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x10100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + i2c0: i2c@10100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x10100400 0x100>, <0x100002a4 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clocks = <&ahb_clk>; + + status = "disabled"; + }; + + gpio: pinctrl@70068 { + compatible = "mscc,luton-pinctrl"; + reg = <0x70068 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 32>; + interrupt-controller; + interrupts = <13>; + #interrupt-cells = <2>; + + i2c_pins: i2c-pins { + pins = "GPIO_5", "GPIO_6"; + function = "twi"; + }; + + uart_pins: uart-pins { + pins = "GPIO_30", "GPIO_31"; + function = "uart"; + }; + + }; + }; +};Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 6/9 MIPS: mscc: Add luton PC0B91 device tree
In reply to Gregory CLEMENTAdd a device tree for the Microsemi Luton PCB091 evaluation board.
It is based on the work of Lars Povlsen <[email protected]>.
--- arch/mips/boot/dts/mscc/Makefile | 5 +++- arch/mips/boot/dts/mscc/luton_pcb091.dts | 30 ++++++++++++++++++++++++ 2 files changed, 34 insertions(+), 1 deletion(-) create mode 100644 arch/mips/boot/dts/mscc/luton_pcb091.dts
arch/mips/boot/dts/mscc/Makefile +4 -1
@@ -1,4 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_SOC_VCOREIII) += ocelot_pcb123.dtb ocelot_pcb120.dtb +dtb-$(CONFIG_SOC_VCOREIII) += \ + luton_pcb091.dtb \ + ocelot_pcb120.dtb \ + ocelot_pcb123.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
arch/mips/boot/dts/mscc/luton_pcb091.dts new file +30 -0
@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +/dts-v1/; + +#include "luton.dtsi" + +/ { + model = "Luton10 PCB091 Reference Board"; + compatible = "mscc,luton-pcb091", "mscc,luton"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +};
Signature · 1 line
2.28.0
Re: [PATCH v2 6/9] MIPS: mscc: Add luton PC0B91 device tree
Quoted 5 lines · Gregory CLEMENT
Add a device tree for the Microsemi Luton PCB091 evaluation board.
It is based on the work of Lars Povlsen <[email protected]>.
Signed-off-by Gregory CLEMENT <[email protected]>
Quoted 58 lines
--- arch/mips/boot/dts/mscc/Makefile | 5 +++- arch/mips/boot/dts/mscc/luton_pcb091.dts | 30 ++++++++++++++++++++++++ 2 files changed, 34 insertions(+), 1 deletion(-) create mode 100644 arch/mips/boot/dts/mscc/luton_pcb091.dtsarch/mips/boot/dts/mscc/Makefile +4
-1@@ -1,4 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_SOC_VCOREIII) += ocelot_pcb123.dtb ocelot_pcb120.dtb +dtb-$(CONFIG_SOC_VCOREIII) += \ + luton_pcb091.dtb \ + ocelot_pcb120.dtb \ + ocelot_pcb123.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))arch/mips/boot/dts/mscc/luton_pcb091.dts new file +30
-0@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +/dts-v1/; + +#include "luton.dtsi" + +/ { + model = "Luton10 PCB091 Reference Board"; + compatible = "mscc,luton-pcb091", "mscc,luton"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +};Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 7/9 MIPS: mscc: build FIT image for Luton
In reply to Gregory CLEMENTLuton now has already an u-boot port so let's build FIT images.
--- arch/mips/generic/Kconfig | 8 ++++++++ arch/mips/generic/Platform | 1 + arch/mips/generic/board-luton.its.S | 23 +++++++++++++++++++++++ 3 files changed, 32 insertions(+) create mode 100644 arch/mips/generic/board-luton.its.S
arch/mips/generic/Kconfig +8 -0
@@ -78,6 +78,14 @@ config FIT_IMAGE_FDT_OCELOT from Microsemi in the FIT kernel image. This requires u-boot on the platform. +config FIT_IMAGE_FDT_LUTON + bool "Include FDT for Microsemi Luton development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Luton development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + config BOARD_INGENIC bool "Support boards based on Ingenic SoCs" select MACH_INGENIC_GENERIC
arch/mips/generic/Platform +1 -0
@@ -20,4 +20,5 @@ its-y := vmlinux.its.S its-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += board-boston.its.S its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S +its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S
arch/mips/generic/board-luton.its.S new file +23 -0
@@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/ { + images { + fdt@luton_pcb091 { + description = "MSCC Luton PCB091 Device Tree"; + data = /incbin/("boot/dts/mscc/luton_pcb091.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + pcb091 { + description = "Luton Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@luton_pcb091"; + }; + }; +};
Signature · 1 line
2.28.0
Re: [PATCH v2 7/9] MIPS: mscc: build FIT image for Luton
Quoted 3 lines · Gregory CLEMENT
Luton now has already an u-boot port so let's build FIT images.
Signed-off-by Gregory CLEMENT <[email protected]>
Quoted 68 lines
--- arch/mips/generic/Kconfig | 8 ++++++++ arch/mips/generic/Platform | 1 + arch/mips/generic/board-luton.its.S | 23 +++++++++++++++++++++++ 3 files changed, 32 insertions(+) create mode 100644 arch/mips/generic/board-luton.its.Sarch/mips/generic/Kconfig +8
-0@@ -78,6 +78,14 @@ config FIT_IMAGE_FDT_OCELOT from Microsemi in the FIT kernel image. This requires u-boot on the platform. +config FIT_IMAGE_FDT_LUTON + bool "Include FDT for Microsemi Luton development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Luton development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + config BOARD_INGENIC bool "Support boards based on Ingenic SoCs" select MACH_INGENIC_GENERICarch/mips/generic/Platform +1
-0@@ -20,4 +20,5 @@ its-y := vmlinux.its.S its-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += board-boston.its.S its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S +its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.Sarch/mips/generic/board-luton.its.S new file +23
-0@@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/ { + images { + fdt@luton_pcb091 { + description = "MSCC Luton PCB091 Device Tree"; + data = /incbin/("boot/dts/mscc/luton_pcb091.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + pcb091 { + description = "Luton Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@luton_pcb091"; + }; + }; +};Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 8/9 MIPS: mscc: Add jaguar2 support
In reply to Gregory CLEMENTAdd a device trees and FIT image support for the Microsemi Jaguar2 SoC which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <[email protected]>.
--- arch/mips/boot/dts/mscc/Makefile | 3 + arch/mips/boot/dts/mscc/jaguar2.dtsi | 167 ++++++++++++ arch/mips/boot/dts/mscc/jaguar2_common.dtsi | 25 ++ arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 267 ++++++++++++++++++++ arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 107 ++++++++ arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 57 +++++ arch/mips/generic/Kconfig | 8 + arch/mips/generic/Platform | 1 + arch/mips/generic/board-jaguar2.its.S | 40 +++ 9 files changed, 675 insertions(+) create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts create mode 100644 arch/mips/generic/board-jaguar2.its.S
arch/mips/boot/dts/mscc/Makefile +3 -0
@@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only dtb-$(CONFIG_SOC_VCOREIII) += \ + jaguar2_pcb110.dtb \ + jaguar2_pcb111.dtb \ + jaguar2_pcb118.dtb \ luton_pcb091.dtb \ ocelot_pcb120.dtb \ ocelot_pcb123.dtb
arch/mips/boot/dts/mscc/jaguar2.dtsi new file +167 -0
167 lines not on this page · raw message
arch/mips/boot/dts/mscc/jaguar2_common.dtsi new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +#include "jaguar2.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +};
arch/mips/boot/dts/mscc/jaguar2_pcb110.dts new file +267 -0
267 lines not on this page · raw message
arch/mips/boot/dts/mscc/jaguar2_pcb111.dts new file +107 -0
107 lines not on this page · raw message
arch/mips/boot/dts/mscc/jaguar2_pcb118.dts new file +57 -0
57 lines not on this page · raw message
arch/mips/generic/Kconfig +8 -0
@@ -86,6 +86,14 @@ config FIT_IMAGE_FDT_LUTON from Microsemi in the FIT kernel image. This requires u-boot on the platform. +config FIT_IMAGE_FDT_JAGUAR2 + bool "Include FDT for Microsemi Jaguar2 development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Jaguar2 development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + config BOARD_INGENIC bool "Support boards based on Ingenic SoCs" select MACH_INGENIC_GENERIC
arch/mips/generic/Platform +1 -0
@@ -21,4 +21,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += board-boston.its.S its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S +its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S
arch/mips/generic/board-jaguar2.its.S new file +40 -0
@@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/ { + images { + fdt@jaguar2_pcb110 { + description = "MSCC Jaguar2 PCB110 Device Tree"; + data = /incbin/("boot/dts/mscc/jaguar2_pcb110.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + fdt@jaguar2_pcb111 { + description = "MSCC Jaguar2 PCB111 Device Tree"; + data = /incbin/("boot/dts/mscc/jaguar2_pcb111.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + pcb110 { + description = "Jaguar2 Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@jaguar2_pcb110"; + ramdisk = "ramdisk"; + }; + pcb111 { + description = "Jaguar2 Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@jaguar2_pcb111"; + ramdisk = "ramdisk"; + }; + }; +};
Signature · 1 line
2.28.0
Re: [PATCH v2 8/9] MIPS: mscc: Add jaguar2 support
Quoted 6 lines · Gregory CLEMENT
Add a device trees and FIT image support for the Microsemi Jaguar2 SoC which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <[email protected]>.
Signed-off-by Gregory CLEMENT <[email protected]>
Quoted 762 lines
--- arch/mips/boot/dts/mscc/Makefile | 3 + arch/mips/boot/dts/mscc/jaguar2.dtsi | 167 ++++++++++++ arch/mips/boot/dts/mscc/jaguar2_common.dtsi | 25 ++ arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 267 ++++++++++++++++++++ arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 107 ++++++++ arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 57 +++++ arch/mips/generic/Kconfig | 8 + arch/mips/generic/Platform | 1 + arch/mips/generic/board-jaguar2.its.S | 40 +++ 9 files changed, 675 insertions(+) create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts create mode 100644 arch/mips/generic/board-jaguar2.its.Sarch/mips/boot/dts/mscc/Makefile +3
-0@@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only dtb-$(CONFIG_SOC_VCOREIII) += \ + jaguar2_pcb110.dtb \ + jaguar2_pcb111.dtb \ + jaguar2_pcb118.dtb \ luton_pcb091.dtb \ ocelot_pcb120.dtb \ ocelot_pcb123.dtbarch/mips/boot/dts/mscc/jaguar2.dtsi new file +167
-0@@ -0,0 +1,167 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,jr2"; + + aliases { + serial0 = &uart0; + serial1 = &uart2; + gpio0 = &gpio; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb: ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@70000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x70000000 0x2c>; + }; + + intc: interrupt-controller@70000070 { + compatible = "mscc,jaguar2-icpu-intr"; + reg = <0x70000070 0x94>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@70100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + uart2: serial@70100800 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100800 0x20>; + interrupts = <7>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + gpio: pinctrl@71010038 { + compatible = "mscc,jaguar2-pinctrl"; + reg = <0x71010038 0x90>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 64>; + + uart_pins: uart-pins { + pins = "GPIO_10", "GPIO_11"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_24", "GPIO_25"; + function = "uart2"; + }; + + cs1_pins: cs1-pins { + pins = "GPIO_16"; + function = "si"; + }; + + cs2_pins: cs2-pins { + pins = "GPIO_17"; + function = "si"; + }; + + cs3_pins: cs3-pins { + pins = "GPIO_18"; + function = "si"; + }; + + i2c_pins: i2c-pins { + pins = "GPIO_14", "GPIO_15"; + function = "twi"; + }; + + i2c2_pins: i2c2-pins { + pins = "GPIO_28", "GPIO_29"; + function = "twi2"; + }; + }; + + i2c0: i2c@70100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x70100400 0x100>, <0x700001b8 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + + i2c2: i2c@70100c00 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + reg = <0x70100c00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + }; +};arch/mips/boot/dts/mscc/jaguar2_common.dtsi new file +25
-0@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +#include "jaguar2.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +};arch/mips/boot/dts/mscc/jaguar2_pcb110.dts new file +267
-0@@ -0,0 +1,267 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +/dts-v1/; +#include "jaguar2_common.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Jaguar2 Cu8-Sfp16 PCB110 Reference Board"; + compatible = "mscc,jr2-pcb110", "mscc,jr2"; + + aliases { + i2c0 = &i2c0; + i2c108 = &i2c108; + i2c109 = &i2c109; + i2c110 = &i2c110; + i2c111 = &i2c111; + i2c112 = &i2c112; + i2c113 = &i2c113; + i2c114 = &i2c114; + i2c115 = &i2c115; + i2c116 = &i2c116; + i2c117 = &i2c117; + i2c118 = &i2c118; + i2c119 = &i2c119; + i2c120 = &i2c120; + i2c121 = &i2c121; + i2c122 = &i2c122; + i2c123 = &i2c123; + i2c124 = &i2c124; + i2c125 = &i2c125; + i2c126 = &i2c126; + i2c127 = &i2c127; + i2c128 = &i2c128; + i2c129 = &i2c129; + i2c130 = &i2c130; + i2c131 = &i2c131; + i2c149 = &i2c149; + i2c150 = &i2c150; + i2c151 = &i2c151; + i2c152 = &i2c152; + }; + i2c0_imux: i2c0-imux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c149", "i2c150", "i2c151", "i2c152", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_pins_i>; + i2c149: i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c150: i2c@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c151: i2c@2 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c152: i2c@3 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2c0_emux: i2c0-emux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + mux-gpios = <&gpio 51 GPIO_ACTIVE_HIGH + &gpio 52 GPIO_ACTIVE_HIGH + &gpio 53 GPIO_ACTIVE_HIGH + &gpio 58 GPIO_ACTIVE_HIGH + &gpio 59 GPIO_ACTIVE_HIGH>; + idle-state = <0x0>; + i2c108: i2c@10 { + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c109: i2c@11 { + reg = <0x11>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c110: i2c@12 { + reg = <0x12>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c111: i2c@13 { + reg = <0x13>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c112: i2c@14 { + reg = <0x14>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c113: i2c@15 { + reg = <0x15>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c114: i2c@16 { + reg = <0x16>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c115: i2c@17 { + reg = <0x17>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c116: i2c@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c117: i2c@9 { + reg = <0x9>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c118: i2c@a { + reg = <0xa>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c119: i2c@b { + reg = <0xb>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c120: i2c@c { + reg = <0xc>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c121: i2c@d { + reg = <0xd>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c122: i2c@e { + reg = <0xe>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c123: i2c@f { + reg = <0xf>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&gpio { + synce_pins: synce-pins { + // GPIO 16 == SI_nCS1 + pins = "GPIO_16"; + function = "si"; + }; + synce_builtin_pins: synce-builtin-pins { + // GPIO 49 == SI_nCS13 + pins = "GPIO_49"; + function = "si"; + }; + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2 { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3 { + pins = "GPIO_21"; + function = "twi_scl_m"; + output-high; + }; +}; + +&i2c0 { + pca9545@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + i2c124: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c125: i2c@1 { + /* FMC B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c126: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c127: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + pca9545@71 { + compatible = "nxp,pca9545"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + i2c128: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c129: i2c@1 { + /* FMC B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c130: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c131: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +};arch/mips/boot/dts/mscc/jaguar2_pcb111.dts new file +107
-0@@ -0,0 +1,107 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "jaguar2_common.dtsi" + +/ { + model = "Jaguar2 Cu48 PCB111 Reference Board"; + compatible = "mscc,jr2-pcb111", "mscc,jr2"; + + aliases { + i2c0 = &i2c0; + i2c149 = &i2c149; + i2c150 = &i2c150; + i2c151 = &i2c151; + i2c152 = &i2c152; + i2c203 = &i2c203; + }; + + i2c0_imux: i2c0-imux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c149", "i2c150", "i2c151", "i2c152", "i2c203", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_pins_i>; // Added by convention for PoE + pinctrl-5 = <&i2cmux_pins_i>; + i2c149: i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c150: i2c@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c151: i2c@2 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c152: i2c@3 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c203: i2c@4 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&gpio { + synce_builtin_pins: synce-builtin-pins { + // GPIO 49 == SI_nCS13 + pins = "GPIO_49"; + function = "si"; + }; + cpld_pins: cpld-pins { + // GPIO 50 == SI_nCS14 + pins = "GPIO_50"; + function = "si"; + }; + cpld_fifo_pins: synce-builtin-pins { + // GPIO 51 == SI_nCS15 + pins = "GPIO_51"; + function = "si"; + }; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_17", "GPIO_18"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2 { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3 { + pins = "GPIO_21"; + function = "twi_scl_m"; + output-high; + }; +};arch/mips/boot/dts/mscc/jaguar2_pcb118.dts new file +57
-0@@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "jaguar2_common.dtsi" + +/ { + model = "Jaguar2/Aquantia PCB118 Reference Board"; + compatible = "mscc,jr2-pcb118", "mscc,jr2"; + + aliases { + i2c150 = &i2c150; + i2c151 = &i2c151; + }; + + i2c0_imux: i2c0-imux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c150", "i2c151", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_pins_i>; + i2c150: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c151: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_17", "GPIO_16"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_16"; + function = "twi_scl_m"; + output-high; + }; +};arch/mips/generic/Kconfig +8
-0@@ -86,6 +86,14 @@ config FIT_IMAGE_FDT_LUTON from Microsemi in the FIT kernel image. This requires u-boot on the platform. +config FIT_IMAGE_FDT_JAGUAR2 + bool "Include FDT for Microsemi Jaguar2 development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Jaguar2 development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + config BOARD_INGENIC bool "Support boards based on Ingenic SoCs" select MACH_INGENIC_GENERICarch/mips/generic/Platform +1
-0@@ -21,4 +21,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += board-boston.its.S its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S +its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.Sarch/mips/generic/board-jaguar2.its.S new file +40
-0@@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/ { + images { + fdt@jaguar2_pcb110 { + description = "MSCC Jaguar2 PCB110 Device Tree"; + data = /incbin/("boot/dts/mscc/jaguar2_pcb110.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + fdt@jaguar2_pcb111 { + description = "MSCC Jaguar2 PCB111 Device Tree"; + data = /incbin/("boot/dts/mscc/jaguar2_pcb111.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + pcb110 { + description = "Jaguar2 Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@jaguar2_pcb110"; + ramdisk = "ramdisk"; + }; + pcb111 { + description = "Jaguar2 Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@jaguar2_pcb111"; + ramdisk = "ramdisk"; + }; + }; +};Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 9/9 MIPS: mscc: Add serval support
In reply to Gregory CLEMENTAdd a device trees and FIT image support for the Microsemi Serval SoC which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <[email protected]>.
--- arch/mips/boot/dts/mscc/Makefile | 5 +- arch/mips/boot/dts/mscc/serval.dtsi | 153 +++++++++++++++++++++ arch/mips/boot/dts/mscc/serval_common.dtsi | 127 +++++++++++++++++ arch/mips/boot/dts/mscc/serval_pcb105.dts | 17 +++ arch/mips/boot/dts/mscc/serval_pcb106.dts | 17 +++ arch/mips/generic/Kconfig | 8 ++ arch/mips/generic/Platform | 1 + arch/mips/generic/board-serval.its.S | 24 ++++ 8 files changed, 351 insertions(+), 1 deletion(-) create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts create mode 100644 arch/mips/generic/board-serval.its.S
arch/mips/boot/dts/mscc/Makefile +4 -1
@@ -5,6 +5,9 @@ dtb-$(CONFIG_SOC_VCOREIII) += \ jaguar2_pcb118.dtb \ luton_pcb091.dtb \ ocelot_pcb120.dtb \ - ocelot_pcb123.dtb + ocelot_pcb123.dtb \ + serval_pcb105.dtb \ + serval_pcb106.dtb + obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
arch/mips/boot/dts/mscc/serval.dtsi new file +153 -0
153 lines not on this page · raw message
arch/mips/boot/dts/mscc/serval_common.dtsi new file +127 -0
127 lines not on this page · raw message
arch/mips/boot/dts/mscc/serval_pcb105.dts new file +17 -0
@@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "serval_common.dtsi" + +/ { + model = "Serval PCB105 Reference Board"; + compatible = "mscc,serval-pcb105", "mscc,serval"; + + aliases { + }; + +}; +
arch/mips/boot/dts/mscc/serval_pcb106.dts new file +17 -0
@@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "serval_common.dtsi" + +/ { + model = "Serval PCB106 Reference Board"; + compatible = "mscc,serval-pcb106", "mscc,serval"; + + aliases { + }; + +}; +
arch/mips/generic/Kconfig +8 -0
@@ -94,6 +94,14 @@ config FIT_IMAGE_FDT_JAGUAR2 from Microsemi in the FIT kernel image. This requires u-boot on the platform. +config FIT_IMAGE_FDT_SERVAL + bool "Include FDT for Microsemi Serval development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Serval development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + config BOARD_INGENIC bool "Support boards based on Ingenic SoCs" select MACH_INGENIC_GENERIC
arch/mips/generic/Platform +1 -0
@@ -22,4 +22,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S +its-$(CONFIG_FIT_IMAGE_FDT_SERVAL) += board-serval.its.S its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S
arch/mips/generic/board-serval.its.S new file +24 -0
@@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/ { + images { + fdt@serval_pcb105 { + description = "MSCC Serval PCB105 Device Tree"; + data = /incbin/("boot/dts/mscc/serval_pcb105.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + pcb105 { + description = "Serval Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@serval_pcb105"; + ramdisk = "ramdisk"; + }; + }; +};
Signature · 1 line
2.28.0
Re: [PATCH v2 9/9] MIPS: mscc: Add serval support
Quoted 8 lines · Gregory CLEMENT
Add a device trees and FIT image support for the Microsemi Serval SoC which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <[email protected]>.
Signed-off-by Gregory CLEMENT <[email protected]>Signed-off-by Gregory CLEMENT <[email protected]>
You have two SoBs here,
Else
Quoted 431 lines
--- arch/mips/boot/dts/mscc/Makefile | 5 +- arch/mips/boot/dts/mscc/serval.dtsi | 153 +++++++++++++++++++++ arch/mips/boot/dts/mscc/serval_common.dtsi | 127 +++++++++++++++++ arch/mips/boot/dts/mscc/serval_pcb105.dts | 17 +++ arch/mips/boot/dts/mscc/serval_pcb106.dts | 17 +++ arch/mips/generic/Kconfig | 8 ++ arch/mips/generic/Platform | 1 + arch/mips/generic/board-serval.its.S | 24 ++++ 8 files changed, 351 insertions(+), 1 deletion(-) create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts create mode 100644 arch/mips/generic/board-serval.its.Sarch/mips/boot/dts/mscc/Makefile +4
-1@@ -5,6 +5,9 @@ dtb-$(CONFIG_SOC_VCOREIII) += \ jaguar2_pcb118.dtb \ luton_pcb091.dtb \ ocelot_pcb120.dtb \ - ocelot_pcb123.dtb + ocelot_pcb123.dtb \ + serval_pcb105.dtb \ + serval_pcb106.dtb + obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))arch/mips/boot/dts/mscc/serval.dtsi new file +153
-0@@ -0,0 +1,153 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,serval"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <416666666>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb: ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@70000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x70000000 0x2c>; + }; + + intc: interrupt-controller@70000070 { + compatible = "mscc,serval-icpu-intr"; + reg = <0x70000070 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@70100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + uart2: serial@70100800 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100800 0x20>; + interrupts = <7>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + gpio: pinctrl@71070034 { + compatible = "mscc,serval-pinctrl"; + reg = <0x71070034 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + + sgpio_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_2", "GPIO_3", "GPIO_1"; + function = "sg0"; + }; + + i2c_pins: i2c-pins { + pins = "GPIO_6", "GPIO_7"; + function = "twi"; + }; + + uart_pins: uart-pins { + pins = "GPIO_26", "GPIO_27"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_13", "GPIO_14"; + function = "uart2"; + }; + + cs1_pins: cs1-pins { + pins = "GPIO_8"; + function = "si"; + }; + + irqext0_pins: irqext0-pins { + pins = "GPIO_28"; + function = "irq0"; + }; + + irqext1_pins: irqext1-pins { + pins = "GPIO_29"; + function = "irq1"; + }; + }; + + i2c0: i2c@70100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x70100400 0x100>, <0x70000190 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + }; +};arch/mips/boot/dts/mscc/serval_common.dtsi new file +127
-0@@ -0,0 +1,127 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +#include "serval.dtsi" + +/ { + aliases { + serial0 = &uart0; + i2c104 = &i2c104; + i2c105 = &i2c105; + i2c106 = &i2c106; + i2c107 = &i2c107; + i2c108 = &i2c108; + i2c109 = &i2c109; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + i2c0_imux: i2c0-imux{ + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c104", "i2c105", "i2c106", "i2c107", + "i2c108", "i2c109", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_4>; + pinctrl-5 = <&i2cmux_5>; + pinctrl-6 = <&i2cmux_pins_i>; + i2c104: i2c_sfp0@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c105: i2c_sfp1@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c106: i2c_sfp2@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c107: i2c_sfp3@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c108: i2c_sfp4@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c109: i2c_sfp5@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&gpio { + i2c_pins: i2c-pins { + pins = "GPIO_7"; /* No "default" scl for i2c0 */ + function = "twi"; + }; + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_11", "GPIO_12", "GPIO_18", "GPIO_19", + "GPIO_20", "GPIO_21"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_11"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_12"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2 { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3 { + pins = "GPIO_19"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_4: i2cmux-4 { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_5: i2cmux-5 { + pins = "GPIO_21"; + function = "twi_scl_m"; + output-high; + }; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +}; +arch/mips/boot/dts/mscc/serval_pcb105.dts new file +17
-0@@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "serval_common.dtsi" + +/ { + model = "Serval PCB105 Reference Board"; + compatible = "mscc,serval-pcb105", "mscc,serval"; + + aliases { + }; + +}; +arch/mips/boot/dts/mscc/serval_pcb106.dts new file +17
-0@@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "serval_common.dtsi" + +/ { + model = "Serval PCB106 Reference Board"; + compatible = "mscc,serval-pcb106", "mscc,serval"; + + aliases { + }; + +}; +arch/mips/generic/Kconfig +8
-0@@ -94,6 +94,14 @@ config FIT_IMAGE_FDT_JAGUAR2 from Microsemi in the FIT kernel image. This requires u-boot on the platform. +config FIT_IMAGE_FDT_SERVAL + bool "Include FDT for Microsemi Serval development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Serval development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + config BOARD_INGENIC bool "Support boards based on Ingenic SoCs" select MACH_INGENIC_GENERICarch/mips/generic/Platform +1
-0@@ -22,4 +22,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S +its-$(CONFIG_FIT_IMAGE_FDT_SERVAL) += board-serval.its.S its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.Sarch/mips/generic/board-serval.its.S new file +24
-0@@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/ { + images { + fdt@serval_pcb105 { + description = "MSCC Serval PCB105 Device Tree"; + data = /incbin/("boot/dts/mscc/serval_pcb105.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + pcb105 { + description = "Serval Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@serval_pcb105"; + ramdisk = "ramdisk"; + }; + }; +};Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Thomas Bogendoerfer
maintainerQuoted 60 lines · Gregory CLEMENT
Hello,
Ocelot SoC belongs to a larger family of SoCs called VCoreIII. Luton, Serval and Jaguar2 are part of this family and are added with this series.
This the second version with a few changes in device tree.
To be able to run a linux kernel the irqchip support and the pinctrl support are needed. Two series of patches adding this support has been posted to their subsystem. However there is no build dependency between them.
Changelog:
v1 -> v2
- Moved the changes in binding documentation from patch 8 to 2
- Fixed i2c devices node name in jaguar2 device tree files
- Added Acked-by from Rob Herring
- Fixes few more devices tree nodes, now there is no more warning when running "make W=1 dtbs"Gregory
Gregory CLEMENT (9):
dt-bindings: mips: Add Luton
dt-bindings: mips: Add Serval and Jaguar2
MIPS: mscc: Prepare configuration to handle more SoCs
MIPS: mscc: Fix configuration name for ocelot legacy boards
MIPS: mscc: Add luton dtsi
MIPS: mscc: Add luton PC0B91 device tree
MIPS: mscc: build FIT image for Luton
MIPS: mscc: Add jaguar2 support
MIPS: mscc: Add serval support.../devicetree/bindings/mips/mscc.txt | 2 +- arch/mips/boot/dts/Makefile | 2 +- arch/mips/boot/dts/mscc/Makefile | 11 +- arch/mips/boot/dts/mscc/jaguar2.dtsi | 167 +++++++++++ arch/mips/boot/dts/mscc/jaguar2_common.dtsi | 25 ++ arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 267 ++++++++++++++++++ arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 107 +++++++ arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 57 ++++ arch/mips/boot/dts/mscc/luton.dtsi | 116 ++++++++ arch/mips/boot/dts/mscc/luton_pcb091.dts | 30 ++ arch/mips/boot/dts/mscc/serval.dtsi | 153 ++++++++++ arch/mips/boot/dts/mscc/serval_common.dtsi | 127 +++++++++ arch/mips/boot/dts/mscc/serval_pcb105.dts | 17 ++ arch/mips/boot/dts/mscc/serval_pcb106.dts | 17 ++ arch/mips/generic/Kconfig | 37 ++- arch/mips/generic/Platform | 3 + arch/mips/generic/board-jaguar2.its.S | 40 +++ arch/mips/generic/board-luton.its.S | 23 ++ arch/mips/generic/board-serval.its.S | 24 ++ 19 files changed, 1218 insertions(+), 7 deletions(-) create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts create mode 100644 arch/mips/boot/dts/mscc/luton.dtsi
Quoted 8 lines
create mode 100644 arch/mips/boot/dts/mscc/luton_pcb091.dts create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts create mode 100644 arch/mips/generic/board-jaguar2.its.S create mode 100644 arch/mips/generic/board-luton.its.S create mode 100644 arch/mips/generic/board-serval.its.S
series applied to mips-next.
Thomas.
Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]