Skip to contentSkip to conversation

MIPS: Add support for more mscc SoCs: Luton, Serval and Jaguar2

PATCH In review Gregory CLEMENT 3 participants 21 messages Nov 10, 2020 – Nov 12, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v2 cover MIPS: Add support for more mscc SoCs: Luton, Serval and Jaguar2

Hello,

Ocelot SoC belongs to a larger family of SoCs called VCoreIII. Luton, Serval and Jaguar2 are part of this family and are added with this series.

This the second version with a few changes in device tree.

To be able to run a linux kernel the irqchip support and the pinctrl support are needed. Two series of patches adding this support has been posted to their subsystem. However there is no build dependency between them.

Changelog:
v1 -> v2
- Moved the changes in binding documentation from patch 8 to 2
- Fixed i2c devices node name in jaguar2 device tree files
- Added Acked-by from Rob Herring
- Fixes few more devices tree nodes, now there is no more warning when running "make W=1 dtbs"

Gregory

Gregory CLEMENT (9):
dt-bindings: mips: Add Luton
dt-bindings: mips: Add Serval and Jaguar2
MIPS: mscc: Prepare configuration to handle more SoCs
MIPS: mscc: Fix configuration name for ocelot legacy boards
MIPS: mscc: Add luton dtsi
MIPS: mscc: Add luton PC0B91 device tree
MIPS: mscc: build FIT image for Luton
MIPS: mscc: Add jaguar2 support
MIPS: mscc: Add serval support

 .../devicetree/bindings/mips/mscc.txt         |   2 +-
 arch/mips/boot/dts/Makefile                   |   2 +-
 arch/mips/boot/dts/mscc/Makefile              |  11 +-
 arch/mips/boot/dts/mscc/jaguar2.dtsi          | 167 +++++++++++
 arch/mips/boot/dts/mscc/jaguar2_common.dtsi   |  25 ++
 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts    | 267 ++++++++++++++++++
 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts    | 107 +++++++
 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts    |  57 ++++
 arch/mips/boot/dts/mscc/luton.dtsi            | 116 ++++++++
 arch/mips/boot/dts/mscc/luton_pcb091.dts      |  30 ++
 arch/mips/boot/dts/mscc/serval.dtsi           | 153 ++++++++++
 arch/mips/boot/dts/mscc/serval_common.dtsi    | 127 +++++++++
 arch/mips/boot/dts/mscc/serval_pcb105.dts     |  17 ++
 arch/mips/boot/dts/mscc/serval_pcb106.dts     |  17 ++
 arch/mips/generic/Kconfig                     |  37 ++-
 arch/mips/generic/Platform                    |   3 +
 arch/mips/generic/board-jaguar2.its.S         |  40 +++
 arch/mips/generic/board-luton.its.S           |  23 ++
 arch/mips/generic/board-serval.its.S          |  24 ++
 19 files changed, 1218 insertions(+), 7 deletions(-)
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
 create mode 100644 arch/mips/boot/dts/mscc/luton.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/luton_pcb091.dts
 create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts
 create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts
 create mode 100644 arch/mips/generic/board-jaguar2.its.S
 create mode 100644 arch/mips/generic/board-luton.its.S
 create mode 100644 arch/mips/generic/board-serval.its.S
Signature · 1 line
2.28.0
#1 lore raw

PATCH v2 1/9 dt-bindings: mips: Add Luton

Luton SoC belongs to the same family as Ocelot.

---
 Documentation/devicetree/bindings/mips/mscc.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mips/mscc.txt +1 -1
index bc817e984628..cc93fd302553 100644
@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following
 properties:
 
 Required properties:
-- compatible: "mscc,ocelot"
+- compatible: "mscc,ocelot" or "mscc,luton"
 
 
 * Other peripherals:
Signature · 1 line
2.28.0
maintainer Reviewed-by on v2 1/9
#2 lore raw

Re: [PATCH v2 1/9] dt-bindings: mips: Add Luton

Quoted 4 lines · Gregory CLEMENT

Luton SoC belongs to the same family as Ocelot.

Quoted 20 lines
---
 Documentation/devicetree/bindings/mips/mscc.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mips/mscc.txt +1 -1
index bc817e984628..cc93fd302553 100644
@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following
 properties:
 
 Required properties:
-- compatible: "mscc,ocelot"
+- compatible: "mscc,ocelot" or "mscc,luton"
 
 
 * Other peripherals:
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#3 lore raw

PATCH v2 2/9 dt-bindings: mips: Add Serval and Jaguar2

In reply to Gregory CLEMENT

Serval and Jaguar2 SoCs belong to the same family as Ocelot and Luton.

---
 Documentation/devicetree/bindings/mips/mscc.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mips/mscc.txt +1 -1
index cc93fd302553..cc916eaeed0a 100644
@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following
 properties:
 
 Required properties:
-- compatible: "mscc,ocelot" or "mscc,luton"
+- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2"
 
 
 * Other peripherals:
Signature · 1 line
2.28.0
maintainer Reviewed-by on v2 2/9
#4 lore raw

Re: [PATCH v2 2/9] dt-bindings: mips: Add Serval and Jaguar2

Quoted 4 lines · Gregory CLEMENT

Serval and Jaguar2 SoCs belong to the same family as Ocelot and Luton.

Quoted 20 lines
---
 Documentation/devicetree/bindings/mips/mscc.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mips/mscc.txt +1 -1
index cc93fd302553..cc916eaeed0a 100644
@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following
 properties:
 
 Required properties:
-- compatible: "mscc,ocelot" or "mscc,luton"
+- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2"
 
 
 * Other peripherals:
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#5 lore raw

PATCH v2 3/9 MIPS: mscc: Prepare configuration to handle more SoCs

In reply to Gregory CLEMENT

Ocelot belongs to a family of SoC named the VCore III. In order to add these new Soc, use the new symbol SOC_VCOREIII instead of a one dedicated to Ocelot.

In order to avoid regression on driver building, the MSCC_OCELOT configuration symbol is kept until the driver will be converted.

---
 arch/mips/boot/dts/Makefile      |  2 +-
 arch/mips/boot/dts/mscc/Makefile |  2 +-
 arch/mips/generic/Kconfig        | 11 ++++++++---
 3 files changed, 10 insertions(+), 5 deletions(-)
arch/mips/boot/dts/Makefile +1 -1
index 19027129add8..0259238d7a2e 100644
@@ -6,7 +6,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= img
 subdir-$(CONFIG_MACH_INGENIC)		+= ingenic
 subdir-$(CONFIG_LANTIQ)			+= lantiq
 subdir-$(CONFIG_MACH_LOONGSON64)	+= loongson
-subdir-$(CONFIG_MSCC_OCELOT)		+= mscc
+subdir-$(CONFIG_SOC_VCOREIII)		+= mscc
 subdir-$(CONFIG_MIPS_MALTA)		+= mti
 subdir-$(CONFIG_LEGACY_BOARD_SEAD3)	+= mti
 subdir-$(CONFIG_NLM_XLP_BOARD)		+= netlogic
arch/mips/boot/dts/mscc/Makefile +1 -1
index eb71515871f6..5015ccbbfb23 100644
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_MSCC_OCELOT)	+= ocelot_pcb123.dtb ocelot_pcb120.dtb
+dtb-$(CONFIG_SOC_VCOREIII)	+= ocelot_pcb123.dtb ocelot_pcb120.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
arch/mips/generic/Kconfig +8 -3
index 55d9aed7ced9..45431b88dded 100644
@@ -34,14 +34,19 @@ config LEGACY_BOARD_OCELOT
 	bool "Support MSCC Ocelot boards"
 	depends on LEGACY_BOARD_SEAD3=n
 	select LEGACY_BOARDS
-	select MSCC_OCELOT
+	select SOC_VCOREIII
 	select SYS_HAS_EARLY_PRINTK
 	select USE_GENERIC_EARLY_PRINTK_8250
 
-config MSCC_OCELOT
+config SOC_VCOREIII
 	bool
 	select GPIOLIB
 	select MSCC_OCELOT_IRQ
+	select MSCC_OCELOT #will be removed when driver no more use it
+
+#Will be removed when the driver using it will be converted to SOC_VCOREIII
+config MSCC_OCELOT
+	bool
 
 comment "FIT/UHI Boards"
 
@@ -67,7 +72,7 @@ config FIT_IMAGE_FDT_XILFPGA
 
 config FIT_IMAGE_FDT_OCELOT
 	bool "Include FDT for Microsemi Ocelot development platforms"
-	select MSCC_OCELOT
+	select SOC_VCOREIII
 	help
 	  Enable this to include the FDT for the Ocelot development platforms
 	  from Microsemi in the FIT kernel image.
Signature · 1 line
2.28.0
maintainer Acked-by on v2 3/9
#6 lore raw

Re: [PATCH v2 3/9] MIPS: mscc: Prepare configuration to handle more SoCs

Quoted 8 lines · Gregory CLEMENT

Ocelot belongs to a family of SoC named the VCore III. In order to add these new Soc, use the new symbol SOC_VCOREIII instead of a one dedicated to Ocelot.

In order to avoid regression on driver building, the MSCC_OCELOT configuration symbol is kept until the driver will be converted.

Quoted 67 lines
---
 arch/mips/boot/dts/Makefile      |  2 +-
 arch/mips/boot/dts/mscc/Makefile |  2 +-
 arch/mips/generic/Kconfig        | 11 ++++++++---
 3 files changed, 10 insertions(+), 5 deletions(-)
arch/mips/boot/dts/Makefile +1 -1
index 19027129add8..0259238d7a2e 100644
@@ -6,7 +6,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= img
 subdir-$(CONFIG_MACH_INGENIC)		+= ingenic
 subdir-$(CONFIG_LANTIQ)			+= lantiq
 subdir-$(CONFIG_MACH_LOONGSON64)	+= loongson
-subdir-$(CONFIG_MSCC_OCELOT)		+= mscc
+subdir-$(CONFIG_SOC_VCOREIII)		+= mscc
 subdir-$(CONFIG_MIPS_MALTA)		+= mti
 subdir-$(CONFIG_LEGACY_BOARD_SEAD3)	+= mti
 subdir-$(CONFIG_NLM_XLP_BOARD)		+= netlogic
arch/mips/boot/dts/mscc/Makefile +1 -1
index eb71515871f6..5015ccbbfb23 100644
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_MSCC_OCELOT)	+= ocelot_pcb123.dtb ocelot_pcb120.dtb
+dtb-$(CONFIG_SOC_VCOREIII)	+= ocelot_pcb123.dtb ocelot_pcb120.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
arch/mips/generic/Kconfig +8 -3
index 55d9aed7ced9..45431b88dded 100644
@@ -34,14 +34,19 @@ config LEGACY_BOARD_OCELOT
 	bool "Support MSCC Ocelot boards"
 	depends on LEGACY_BOARD_SEAD3=n
 	select LEGACY_BOARDS
-	select MSCC_OCELOT
+	select SOC_VCOREIII
 	select SYS_HAS_EARLY_PRINTK
 	select USE_GENERIC_EARLY_PRINTK_8250
 
-config MSCC_OCELOT
+config SOC_VCOREIII
 	bool
 	select GPIOLIB
 	select MSCC_OCELOT_IRQ
+	select MSCC_OCELOT #will be removed when driver no more use it
+
+#Will be removed when the driver using it will be converted to SOC_VCOREIII
+config MSCC_OCELOT
+	bool
 
 comment "FIT/UHI Boards"
 
@@ -67,7 +72,7 @@ config FIT_IMAGE_FDT_XILFPGA
 
 config FIT_IMAGE_FDT_OCELOT
 	bool "Include FDT for Microsemi Ocelot development platforms"
-	select MSCC_OCELOT
+	select SOC_VCOREIII
 	help
 	  Enable this to include the FDT for the Ocelot development platforms
 	  from Microsemi in the FIT kernel image.
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#7 lore raw

PATCH v2 4/9 MIPS: mscc: Fix configuration name for ocelot legacy boards

In reply to Gregory CLEMENT

Ocelots is supported by the generic MIPS build so make it clears that LEGACY_BOARD_OCELOT is only needed for legacy boards which didn't have bootloader supporting device tree.

---
 arch/mips/generic/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/generic/Kconfig +1 -1
index 45431b88dded..eb2a3fa9fcd7 100644
@@ -31,7 +31,7 @@ comment "MSCC Ocelot doesn't work with SEAD3 enabled"
 	depends on LEGACY_BOARD_SEAD3
 
 config LEGACY_BOARD_OCELOT
-	bool "Support MSCC Ocelot boards"
+	bool "Legacy support for Ocelot based boards"
 	depends on LEGACY_BOARD_SEAD3=n
 	select LEGACY_BOARDS
 	select SOC_VCOREIII
Signature · 1 line
2.28.0
maintainer Acked-by on v2 4/9
#8 lore raw

Re: [PATCH v2 4/9] MIPS: mscc: Fix configuration name for ocelot legacy boards

Quoted 5 lines · Gregory CLEMENT

Ocelots is supported by the generic MIPS build so make it clears that LEGACY_BOARD_OCELOT is only needed for legacy boards which didn't have bootloader supporting device tree.

Quoted 20 lines
---
 arch/mips/generic/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/generic/Kconfig +1 -1
index 45431b88dded..eb2a3fa9fcd7 100644
@@ -31,7 +31,7 @@ comment "MSCC Ocelot doesn't work with SEAD3 enabled"
 	depends on LEGACY_BOARD_SEAD3
 
 config LEGACY_BOARD_OCELOT
-	bool "Support MSCC Ocelot boards"
+	bool "Legacy support for Ocelot based boards"
 	depends on LEGACY_BOARD_SEAD3=n
 	select LEGACY_BOARDS
 	select SOC_VCOREIII
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#9 lore raw

PATCH v2 5/9 MIPS: mscc: Add luton dtsi

In reply to Gregory CLEMENT

Add a device tree include file for the Microsemi Luton SoC which belongs to same family of the Ocelot SoC.

It is based on the work of Lars Povlsen <[email protected]>.

---
 arch/mips/boot/dts/mscc/luton.dtsi | 116 +++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/luton.dtsi
arch/mips/boot/dts/mscc/luton.dtsi new file +116 -0
new file mode 100644
index 000000000000..2a170b84c5a9
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 Microsemi Corporation */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,luton";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+			device_type = "cpu";
+			clocks = <&cpu_clk>;
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	cpu_clk: cpu-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <416666666>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&cpu_clk>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	ahb@60000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x60000000 0x20000000>;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon@10000000 {
+			compatible = "mscc,ocelot-cpu-syscon", "syscon";
+			reg = <0x10000000 0x2c>;
+		};
+
+		intc: interrupt-controller@10000084 {
+			compatible = "mscc,luton-icpu-intr";
+			reg = <0x10000084 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@10100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x10100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		i2c0: i2c@10100400 {
+			compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x10100400 0x100>, <0x100002a4 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clocks = <&ahb_clk>;
+
+			status = "disabled";
+		};
+
+		gpio: pinctrl@70068 {
+			compatible = "mscc,luton-pinctrl";
+			reg = <0x70068 0x28>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 32>;
+			interrupt-controller;
+			interrupts = <13>;
+			#interrupt-cells = <2>;
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_5", "GPIO_6";
+				function = "twi";
+			};
+
+			uart_pins: uart-pins {
+				pins = "GPIO_30", "GPIO_31";
+				function = "uart";
+			};
+
+		};
+	};
+};
Signature · 1 line
2.28.0
maintainer Acked-by on v2 5/9
#10 lore raw

Re: [PATCH v2 5/9] MIPS: mscc: Add luton dtsi

Quoted 6 lines · Gregory CLEMENT

Add a device tree include file for the Microsemi Luton SoC which belongs to same family of the Ocelot SoC.

It is based on the work of Lars Povlsen <[email protected]>.

Quoted 130 lines
---
 arch/mips/boot/dts/mscc/luton.dtsi | 116 +++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/luton.dtsi
arch/mips/boot/dts/mscc/luton.dtsi new file +116 -0
new file mode 100644
index 000000000000..2a170b84c5a9
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 Microsemi Corporation */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,luton";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+			device_type = "cpu";
+			clocks = <&cpu_clk>;
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	cpu_clk: cpu-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <416666666>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&cpu_clk>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	ahb@60000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x60000000 0x20000000>;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon@10000000 {
+			compatible = "mscc,ocelot-cpu-syscon", "syscon";
+			reg = <0x10000000 0x2c>;
+		};
+
+		intc: interrupt-controller@10000084 {
+			compatible = "mscc,luton-icpu-intr";
+			reg = <0x10000084 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@10100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x10100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		i2c0: i2c@10100400 {
+			compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x10100400 0x100>, <0x100002a4 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clocks = <&ahb_clk>;
+
+			status = "disabled";
+		};
+
+		gpio: pinctrl@70068 {
+			compatible = "mscc,luton-pinctrl";
+			reg = <0x70068 0x28>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 32>;
+			interrupt-controller;
+			interrupts = <13>;
+			#interrupt-cells = <2>;
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_5", "GPIO_6";
+				function = "twi";
+			};
+
+			uart_pins: uart-pins {
+				pins = "GPIO_30", "GPIO_31";
+				function = "uart";
+			};
+
+		};
+	};
+};
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
maintainer Acked-by on v2 5/9
#11 lore raw

Re: [PATCH v2 5/9] MIPS: mscc: Add luton dtsi

In reply to Gregory CLEMENT
Quoted 6 lines · Gregory CLEMENT

Add a device tree include file for the Microsemi Luton SoC which belongs to same family of the Ocelot SoC.

It is based on the work of Lars Povlsen <[email protected]>.

Quoted 130 lines
---
 arch/mips/boot/dts/mscc/luton.dtsi | 116 +++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/luton.dtsi
arch/mips/boot/dts/mscc/luton.dtsi new file +116 -0
new file mode 100644
index 000000000000..2a170b84c5a9
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 Microsemi Corporation */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,luton";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+			device_type = "cpu";
+			clocks = <&cpu_clk>;
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	cpu_clk: cpu-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <416666666>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&cpu_clk>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	ahb@60000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x60000000 0x20000000>;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon@10000000 {
+			compatible = "mscc,ocelot-cpu-syscon", "syscon";
+			reg = <0x10000000 0x2c>;
+		};
+
+		intc: interrupt-controller@10000084 {
+			compatible = "mscc,luton-icpu-intr";
+			reg = <0x10000084 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@10100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x10100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		i2c0: i2c@10100400 {
+			compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x10100400 0x100>, <0x100002a4 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clocks = <&ahb_clk>;
+
+			status = "disabled";
+		};
+
+		gpio: pinctrl@70068 {
+			compatible = "mscc,luton-pinctrl";
+			reg = <0x70068 0x28>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 32>;
+			interrupt-controller;
+			interrupts = <13>;
+			#interrupt-cells = <2>;
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_5", "GPIO_6";
+				function = "twi";
+			};
+
+			uart_pins: uart-pins {
+				pins = "GPIO_30", "GPIO_31";
+				function = "uart";
+			};
+
+		};
+	};
+};
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#12 lore raw

PATCH v2 6/9 MIPS: mscc: Add luton PC0B91 device tree

In reply to Gregory CLEMENT

Add a device tree for the Microsemi Luton PCB091 evaluation board.

It is based on the work of Lars Povlsen <[email protected]>.

---
 arch/mips/boot/dts/mscc/Makefile         |  5 +++-
 arch/mips/boot/dts/mscc/luton_pcb091.dts | 30 ++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/mscc/luton_pcb091.dts
arch/mips/boot/dts/mscc/Makefile +4 -1
index 5015ccbbfb23..40699b44ed50 100644
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_SOC_VCOREIII)	+= ocelot_pcb123.dtb ocelot_pcb120.dtb
+dtb-$(CONFIG_SOC_VCOREIII)	+= \
+	luton_pcb091.dtb \
+	ocelot_pcb120.dtb \
+	ocelot_pcb123.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
arch/mips/boot/dts/mscc/luton_pcb091.dts new file +30 -0
new file mode 100644
index 000000000000..26ef6285d71d
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microsemi Corporation
+ */
+
+/dts-v1/;
+
+#include "luton.dtsi"
+
+/ {
+	model = "Luton10 PCB091 Reference Board";
+	compatible = "mscc,luton-pcb091", "mscc,luton";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-sda-hold-time-ns = <300>;
+};
Signature · 1 line
2.28.0
maintainer Acked-by on v2 6/9
#13 lore raw

Re: [PATCH v2 6/9] MIPS: mscc: Add luton PC0B91 device tree

Quoted 5 lines · Gregory CLEMENT

Add a device tree for the Microsemi Luton PCB091 evaluation board.

It is based on the work of Lars Povlsen <[email protected]>.

Quoted 58 lines
---
 arch/mips/boot/dts/mscc/Makefile         |  5 +++-
 arch/mips/boot/dts/mscc/luton_pcb091.dts | 30 ++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/mscc/luton_pcb091.dts
arch/mips/boot/dts/mscc/Makefile +4 -1
index 5015ccbbfb23..40699b44ed50 100644
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_SOC_VCOREIII)	+= ocelot_pcb123.dtb ocelot_pcb120.dtb
+dtb-$(CONFIG_SOC_VCOREIII)	+= \
+	luton_pcb091.dtb \
+	ocelot_pcb120.dtb \
+	ocelot_pcb123.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
arch/mips/boot/dts/mscc/luton_pcb091.dts new file +30 -0
new file mode 100644
index 000000000000..26ef6285d71d
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microsemi Corporation
+ */
+
+/dts-v1/;
+
+#include "luton.dtsi"
+
+/ {
+	model = "Luton10 PCB091 Reference Board";
+	compatible = "mscc,luton-pcb091", "mscc,luton";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-sda-hold-time-ns = <300>;
+};
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#14 lore raw

PATCH v2 7/9 MIPS: mscc: build FIT image for Luton

In reply to Gregory CLEMENT

Luton now has already an u-boot port so let's build FIT images.

---
 arch/mips/generic/Kconfig           |  8 ++++++++
 arch/mips/generic/Platform          |  1 +
 arch/mips/generic/board-luton.its.S | 23 +++++++++++++++++++++++
 3 files changed, 32 insertions(+)
 create mode 100644 arch/mips/generic/board-luton.its.S
arch/mips/generic/Kconfig +8 -0
index eb2a3fa9fcd7..e5a7a1314e71 100644
@@ -78,6 +78,14 @@ config FIT_IMAGE_FDT_OCELOT
 	  from Microsemi in the FIT kernel image.
 	  This requires u-boot on the platform.
 
+config FIT_IMAGE_FDT_LUTON
+	bool "Include FDT for Microsemi Luton development platforms"
+	select SOC_VCOREIII
+	help
+	  Enable this to include the FDT for the Luton development platforms
+	  from Microsemi in the FIT kernel image.
+	  This requires u-boot on the platform.
+
 config BOARD_INGENIC
 	bool "Support boards based on Ingenic SoCs"
 	select MACH_INGENIC_GENERIC
arch/mips/generic/Platform +1 -0
index f8ef2f9d107e..4b6905daa39c 100644
@@ -20,4 +20,5 @@ its-y					:= vmlinux.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= board-boston.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= board-ni169445.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_OCELOT)	+= board-ocelot.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_LUTON)	+= board-luton.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= board-xilfpga.its.S
arch/mips/generic/board-luton.its.S new file +23 -0
new file mode 100644
index 000000000000..39a543f62f25
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+	images {
+		fdt@luton_pcb091 {
+			description = "MSCC Luton PCB091 Device Tree";
+			data = /incbin/("boot/dts/mscc/luton_pcb091.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		pcb091 {
+			description = "Luton Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@luton_pcb091";
+		};
+	};
+};
Signature · 1 line
2.28.0
maintainer Acked-by on v2 7/9
#15 lore raw

Re: [PATCH v2 7/9] MIPS: mscc: build FIT image for Luton

Quoted 3 lines · Gregory CLEMENT

Luton now has already an u-boot port so let's build FIT images.

Quoted 68 lines
---
 arch/mips/generic/Kconfig           |  8 ++++++++
 arch/mips/generic/Platform          |  1 +
 arch/mips/generic/board-luton.its.S | 23 +++++++++++++++++++++++
 3 files changed, 32 insertions(+)
 create mode 100644 arch/mips/generic/board-luton.its.S
arch/mips/generic/Kconfig +8 -0
index eb2a3fa9fcd7..e5a7a1314e71 100644
@@ -78,6 +78,14 @@ config FIT_IMAGE_FDT_OCELOT
 	  from Microsemi in the FIT kernel image.
 	  This requires u-boot on the platform.
 
+config FIT_IMAGE_FDT_LUTON
+	bool "Include FDT for Microsemi Luton development platforms"
+	select SOC_VCOREIII
+	help
+	  Enable this to include the FDT for the Luton development platforms
+	  from Microsemi in the FIT kernel image.
+	  This requires u-boot on the platform.
+
 config BOARD_INGENIC
 	bool "Support boards based on Ingenic SoCs"
 	select MACH_INGENIC_GENERIC
arch/mips/generic/Platform +1 -0
index f8ef2f9d107e..4b6905daa39c 100644
@@ -20,4 +20,5 @@ its-y					:= vmlinux.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= board-boston.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= board-ni169445.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_OCELOT)	+= board-ocelot.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_LUTON)	+= board-luton.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= board-xilfpga.its.S
arch/mips/generic/board-luton.its.S new file +23 -0
new file mode 100644
index 000000000000..39a543f62f25
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+	images {
+		fdt@luton_pcb091 {
+			description = "MSCC Luton PCB091 Device Tree";
+			data = /incbin/("boot/dts/mscc/luton_pcb091.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		pcb091 {
+			description = "Luton Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@luton_pcb091";
+		};
+	};
+};
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#16 lore raw

PATCH v2 8/9 MIPS: mscc: Add jaguar2 support

In reply to Gregory CLEMENT

Add a device trees and FIT image support for the Microsemi Jaguar2 SoC which belongs to same family of the Ocelot SoC.

It is based on the work of Lars Povlsen <[email protected]>.

---
 arch/mips/boot/dts/mscc/Makefile            |   3 +
 arch/mips/boot/dts/mscc/jaguar2.dtsi        | 167 ++++++++++++
 arch/mips/boot/dts/mscc/jaguar2_common.dtsi |  25 ++
 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts  | 267 ++++++++++++++++++++
 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts  | 107 ++++++++
 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts  |  57 +++++
 arch/mips/generic/Kconfig                   |   8 +
 arch/mips/generic/Platform                  |   1 +
 arch/mips/generic/board-jaguar2.its.S       |  40 +++
 9 files changed, 675 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
 create mode 100644 arch/mips/generic/board-jaguar2.its.S
arch/mips/boot/dts/mscc/Makefile +3 -0
index 40699b44ed50..befda72ceb26 100644
@@ -1,5 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 dtb-$(CONFIG_SOC_VCOREIII)	+= \
+	jaguar2_pcb110.dtb \
+	jaguar2_pcb111.dtb \
+	jaguar2_pcb118.dtb \
 	luton_pcb091.dtb \
 	ocelot_pcb120.dtb \
 	ocelot_pcb123.dtb
arch/mips/boot/dts/mscc/jaguar2.dtsi new file +167 -0

167 lines not on this page · raw message

arch/mips/boot/dts/mscc/jaguar2_common.dtsi new file +25 -0
new file mode 100644
index 000000000000..679ff0d8eda8
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microsemi Corporation
+ */
+
+#include "jaguar2.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-sda-hold-time-ns = <300>;
+};
arch/mips/boot/dts/mscc/jaguar2_pcb110.dts new file +267 -0

267 lines not on this page · raw message

arch/mips/boot/dts/mscc/jaguar2_pcb111.dts new file +107 -0

107 lines not on this page · raw message

arch/mips/boot/dts/mscc/jaguar2_pcb118.dts new file +57 -0

57 lines not on this page · raw message

arch/mips/generic/Kconfig +8 -0
index e5a7a1314e71..c7a840b8eaa6 100644
@@ -86,6 +86,14 @@ config FIT_IMAGE_FDT_LUTON
 	  from Microsemi in the FIT kernel image.
 	  This requires u-boot on the platform.
 
+config FIT_IMAGE_FDT_JAGUAR2
+	bool "Include FDT for Microsemi Jaguar2 development platforms"
+	select SOC_VCOREIII
+	help
+	  Enable this to include the FDT for the Jaguar2 development platforms
+	  from Microsemi in the FIT kernel image.
+	  This requires u-boot on the platform.
+
 config BOARD_INGENIC
 	bool "Support boards based on Ingenic SoCs"
 	select MACH_INGENIC_GENERIC
arch/mips/generic/Platform +1 -0
index 4b6905daa39c..3f2055bea596 100644
@@ -21,4 +21,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= board-boston.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= board-ni169445.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_OCELOT)	+= board-ocelot.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_LUTON)	+= board-luton.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2)	+= board-jaguar2.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= board-xilfpga.its.S
arch/mips/generic/board-jaguar2.its.S new file +40 -0
new file mode 100644
index 000000000000..fb0e589eeff7
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+	images {
+		fdt@jaguar2_pcb110 {
+			description = "MSCC Jaguar2 PCB110 Device Tree";
+			data = /incbin/("boot/dts/mscc/jaguar2_pcb110.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+		fdt@jaguar2_pcb111 {
+			description = "MSCC Jaguar2 PCB111 Device Tree";
+			data = /incbin/("boot/dts/mscc/jaguar2_pcb111.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		pcb110 {
+			description = "Jaguar2 Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@jaguar2_pcb110";
+			ramdisk = "ramdisk";
+		};
+		pcb111 {
+			description = "Jaguar2 Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@jaguar2_pcb111";
+			ramdisk = "ramdisk";
+		};
+	};
+};
Signature · 1 line
2.28.0
maintainer Acked-by on v2 8/9
#17 lore raw

Re: [PATCH v2 8/9] MIPS: mscc: Add jaguar2 support

Quoted 6 lines · Gregory CLEMENT

Add a device trees and FIT image support for the Microsemi Jaguar2 SoC which belongs to same family of the Ocelot SoC.

It is based on the work of Lars Povlsen <[email protected]>.

Quoted 762 lines
---
 arch/mips/boot/dts/mscc/Makefile            |   3 +
 arch/mips/boot/dts/mscc/jaguar2.dtsi        | 167 ++++++++++++
 arch/mips/boot/dts/mscc/jaguar2_common.dtsi |  25 ++
 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts  | 267 ++++++++++++++++++++
 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts  | 107 ++++++++
 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts  |  57 +++++
 arch/mips/generic/Kconfig                   |   8 +
 arch/mips/generic/Platform                  |   1 +
 arch/mips/generic/board-jaguar2.its.S       |  40 +++
 9 files changed, 675 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
 create mode 100644 arch/mips/generic/board-jaguar2.its.S
arch/mips/boot/dts/mscc/Makefile +3 -0
index 40699b44ed50..befda72ceb26 100644
@@ -1,5 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 dtb-$(CONFIG_SOC_VCOREIII)	+= \
+	jaguar2_pcb110.dtb \
+	jaguar2_pcb111.dtb \
+	jaguar2_pcb118.dtb \
 	luton_pcb091.dtb \
 	ocelot_pcb120.dtb \
 	ocelot_pcb123.dtb
arch/mips/boot/dts/mscc/jaguar2.dtsi new file +167 -0
new file mode 100644
index 000000000000..42b2b0a51ddc
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microsemi Corporation
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,jr2";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		gpio0 = &gpio;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+			device_type = "cpu";
+			clocks = <&cpu_clk>;
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	cpu_clk: cpu-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&cpu_clk>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	ahb: ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon@70000000 {
+			compatible = "mscc,ocelot-cpu-syscon", "syscon";
+			reg = <0x70000000 0x2c>;
+		};
+
+		intc: interrupt-controller@70000070 {
+			compatible = "mscc,jaguar2-icpu-intr";
+			reg = <0x70000070 0x94>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@70100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x70100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		uart2: serial@70100800 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x70100800 0x20>;
+			interrupts = <7>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		gpio: pinctrl@71010038 {
+			compatible = "mscc,jaguar2-pinctrl";
+			reg = <0x71010038 0x90>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 64>;
+
+			uart_pins: uart-pins {
+				pins = "GPIO_10", "GPIO_11";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_24", "GPIO_25";
+				function = "uart2";
+			};
+
+			cs1_pins: cs1-pins {
+				pins = "GPIO_16";
+				function = "si";
+			};
+
+			cs2_pins: cs2-pins {
+				pins = "GPIO_17";
+				function = "si";
+			};
+
+			cs3_pins: cs3-pins {
+				pins = "GPIO_18";
+				function = "si";
+			};
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_14", "GPIO_15";
+				function = "twi";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "GPIO_28", "GPIO_29";
+				function = "twi2";
+			};
+		};
+
+		i2c0: i2c@70100400 {
+			compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x70100400 0x100>, <0x700001b8 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <8>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+
+		i2c2: i2c@70100c00 {
+			compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			reg = <0x70100c00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <8>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+	};
+};
arch/mips/boot/dts/mscc/jaguar2_common.dtsi new file +25 -0
new file mode 100644
index 000000000000..679ff0d8eda8
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microsemi Corporation
+ */
+
+#include "jaguar2.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-sda-hold-time-ns = <300>;
+};
arch/mips/boot/dts/mscc/jaguar2_pcb110.dts new file +267 -0
new file mode 100644
index 000000000000..d80cd6842b2a
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "jaguar2_common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Jaguar2 Cu8-Sfp16 PCB110 Reference Board";
+	compatible = "mscc,jr2-pcb110", "mscc,jr2";
+
+	aliases {
+		i2c0    = &i2c0;
+		i2c108  = &i2c108;
+		i2c109  = &i2c109;
+		i2c110  = &i2c110;
+		i2c111  = &i2c111;
+		i2c112  = &i2c112;
+		i2c113  = &i2c113;
+		i2c114  = &i2c114;
+		i2c115  = &i2c115;
+		i2c116  = &i2c116;
+		i2c117  = &i2c117;
+		i2c118  = &i2c118;
+		i2c119  = &i2c119;
+		i2c120  = &i2c120;
+		i2c121  = &i2c121;
+		i2c122  = &i2c122;
+		i2c123  = &i2c123;
+		i2c124  = &i2c124;
+		i2c125  = &i2c125;
+		i2c126  = &i2c126;
+		i2c127  = &i2c127;
+		i2c128  = &i2c128;
+		i2c129  = &i2c129;
+		i2c130  = &i2c130;
+		i2c131  = &i2c131;
+		i2c149  = &i2c149;
+		i2c150  = &i2c150;
+		i2c151  = &i2c151;
+		i2c152  = &i2c152;
+	};
+	i2c0_imux: i2c0-imux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+		pinctrl-names =
+			"i2c149", "i2c150", "i2c151", "i2c152", "idle";
+		pinctrl-0 = <&i2cmux_0>;
+		pinctrl-1 = <&i2cmux_1>;
+		pinctrl-2 = <&i2cmux_2>;
+		pinctrl-3 = <&i2cmux_3>;
+		pinctrl-4 = <&i2cmux_pins_i>;
+		i2c149: i2c@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c150: i2c@1 {
+			reg = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c151: i2c@2 {
+			reg = <0x2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c152: i2c@3 {
+			reg = <0x3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+	i2c0_emux: i2c0-emux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+		mux-gpios = <&gpio 51 GPIO_ACTIVE_HIGH
+			     &gpio 52 GPIO_ACTIVE_HIGH
+			     &gpio 53 GPIO_ACTIVE_HIGH
+			     &gpio 58 GPIO_ACTIVE_HIGH
+			     &gpio 59 GPIO_ACTIVE_HIGH>;
+		idle-state = <0x0>;
+		i2c108: i2c@10 {
+			reg = <0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c109: i2c@11 {
+			reg = <0x11>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c110: i2c@12 {
+			reg = <0x12>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c111: i2c@13 {
+			reg = <0x13>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c112: i2c@14 {
+			reg = <0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c113: i2c@15 {
+			reg = <0x15>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c114: i2c@16 {
+			reg = <0x16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c115: i2c@17 {
+			reg = <0x17>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c116: i2c@8 {
+			reg = <0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c117: i2c@9 {
+			reg = <0x9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c118: i2c@a {
+			reg = <0xa>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c119: i2c@b {
+			reg = <0xb>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c120: i2c@c {
+			reg = <0xc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c121: i2c@d {
+			reg = <0xd>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c122: i2c@e {
+			reg = <0xe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c123: i2c@f {
+			reg = <0xf>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	synce_pins: synce-pins {
+		// GPIO 16 == SI_nCS1
+		pins = "GPIO_16";
+		function = "si";
+	};
+	synce_builtin_pins: synce-builtin-pins {
+		// GPIO 49 == SI_nCS13
+		pins = "GPIO_49";
+		function = "si";
+	};
+	i2cmux_pins_i: i2cmux-pins-i {
+		pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_0: i2cmux-0 {
+		pins = "GPIO_17";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_1: i2cmux-1 {
+		pins = "GPIO_18";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_2: i2cmux-2 {
+		pins = "GPIO_20";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_3: i2cmux-3 {
+		pins = "GPIO_21";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&i2c0 {
+	pca9545@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		i2c124: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c125: i2c@1 {
+			/* FMC B */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c126: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c127: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+	pca9545@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		i2c128: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c129: i2c@1 {
+			/* FMC B */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c130: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c131: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
arch/mips/boot/dts/mscc/jaguar2_pcb111.dts new file +107 -0
new file mode 100644
index 000000000000..813c5e16013c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "jaguar2_common.dtsi"
+
+/ {
+	model = "Jaguar2 Cu48 PCB111 Reference Board";
+	compatible = "mscc,jr2-pcb111", "mscc,jr2";
+
+	aliases {
+		i2c0    = &i2c0;
+		i2c149  = &i2c149;
+		i2c150  = &i2c150;
+		i2c151  = &i2c151;
+		i2c152  = &i2c152;
+		i2c203  = &i2c203;
+	};
+
+	i2c0_imux: i2c0-imux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+		pinctrl-names =
+			"i2c149", "i2c150", "i2c151", "i2c152", "i2c203", "idle";
+		pinctrl-0 = <&i2cmux_0>;
+		pinctrl-1 = <&i2cmux_1>;
+		pinctrl-2 = <&i2cmux_2>;
+		pinctrl-3 = <&i2cmux_3>;
+		pinctrl-4 = <&i2cmux_pins_i>; // Added by convention for PoE
+		pinctrl-5 = <&i2cmux_pins_i>;
+		i2c149: i2c@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c150: i2c@1 {
+			reg = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c151: i2c@2 {
+			reg = <0x2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c152: i2c@3 {
+			reg = <0x3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c203: i2c@4 {
+			reg = <0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	synce_builtin_pins: synce-builtin-pins {
+		// GPIO 49 == SI_nCS13
+		pins = "GPIO_49";
+		function = "si";
+	};
+	cpld_pins: cpld-pins {
+		// GPIO 50 == SI_nCS14
+		pins = "GPIO_50";
+		function = "si";
+	};
+	cpld_fifo_pins: synce-builtin-pins {
+		// GPIO 51 == SI_nCS15
+		pins = "GPIO_51";
+		function = "si";
+	};
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins-i {
+		pins = "GPIO_17", "GPIO_18";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_0: i2cmux-0 {
+		pins = "GPIO_17";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_1: i2cmux-1 {
+		pins = "GPIO_18";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_2: i2cmux-2 {
+		pins = "GPIO_20";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_3: i2cmux-3 {
+		pins = "GPIO_21";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
arch/mips/boot/dts/mscc/jaguar2_pcb118.dts new file +57 -0
new file mode 100644
index 000000000000..27c644f2d17f
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "jaguar2_common.dtsi"
+
+/ {
+	model = "Jaguar2/Aquantia PCB118 Reference Board";
+	compatible = "mscc,jr2-pcb118", "mscc,jr2";
+
+	aliases {
+		i2c150  = &i2c150;
+		i2c151  = &i2c151;
+	};
+
+	i2c0_imux: i2c0-imux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+		pinctrl-names =
+			"i2c150", "i2c151", "idle";
+		pinctrl-0 = <&i2cmux_0>;
+		pinctrl-1 = <&i2cmux_1>;
+		pinctrl-2 = <&i2cmux_pins_i>;
+		i2c150: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c151: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins-i {
+		pins = "GPIO_17", "GPIO_16";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_0: i2cmux-0 {
+		pins = "GPIO_17";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_1: i2cmux-1 {
+		pins = "GPIO_16";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
arch/mips/generic/Kconfig +8 -0
index e5a7a1314e71..c7a840b8eaa6 100644
@@ -86,6 +86,14 @@ config FIT_IMAGE_FDT_LUTON
 	  from Microsemi in the FIT kernel image.
 	  This requires u-boot on the platform.
 
+config FIT_IMAGE_FDT_JAGUAR2
+	bool "Include FDT for Microsemi Jaguar2 development platforms"
+	select SOC_VCOREIII
+	help
+	  Enable this to include the FDT for the Jaguar2 development platforms
+	  from Microsemi in the FIT kernel image.
+	  This requires u-boot on the platform.
+
 config BOARD_INGENIC
 	bool "Support boards based on Ingenic SoCs"
 	select MACH_INGENIC_GENERIC
arch/mips/generic/Platform +1 -0
index 4b6905daa39c..3f2055bea596 100644
@@ -21,4 +21,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= board-boston.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= board-ni169445.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_OCELOT)	+= board-ocelot.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_LUTON)	+= board-luton.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2)	+= board-jaguar2.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= board-xilfpga.its.S
arch/mips/generic/board-jaguar2.its.S new file +40 -0
new file mode 100644
index 000000000000..fb0e589eeff7
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+	images {
+		fdt@jaguar2_pcb110 {
+			description = "MSCC Jaguar2 PCB110 Device Tree";
+			data = /incbin/("boot/dts/mscc/jaguar2_pcb110.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+		fdt@jaguar2_pcb111 {
+			description = "MSCC Jaguar2 PCB111 Device Tree";
+			data = /incbin/("boot/dts/mscc/jaguar2_pcb111.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		pcb110 {
+			description = "Jaguar2 Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@jaguar2_pcb110";
+			ramdisk = "ramdisk";
+		};
+		pcb111 {
+			description = "Jaguar2 Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@jaguar2_pcb111";
+			ramdisk = "ramdisk";
+		};
+	};
+};
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#18 lore raw

PATCH v2 9/9 MIPS: mscc: Add serval support

In reply to Gregory CLEMENT

Add a device trees and FIT image support for the Microsemi Serval SoC which belongs to same family of the Ocelot SoC.

It is based on the work of Lars Povlsen <[email protected]>.

---
 arch/mips/boot/dts/mscc/Makefile           |   5 +-
 arch/mips/boot/dts/mscc/serval.dtsi        | 153 +++++++++++++++++++++
 arch/mips/boot/dts/mscc/serval_common.dtsi | 127 +++++++++++++++++
 arch/mips/boot/dts/mscc/serval_pcb105.dts  |  17 +++
 arch/mips/boot/dts/mscc/serval_pcb106.dts  |  17 +++
 arch/mips/generic/Kconfig                  |   8 ++
 arch/mips/generic/Platform                 |   1 +
 arch/mips/generic/board-serval.its.S       |  24 ++++
 8 files changed, 351 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts
 create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts
 create mode 100644 arch/mips/generic/board-serval.its.S
arch/mips/boot/dts/mscc/Makefile +4 -1
index befda72ceb26..eeb6b7aae83b 100644
@@ -5,6 +5,9 @@ dtb-$(CONFIG_SOC_VCOREIII)	+= \
 	jaguar2_pcb118.dtb \
 	luton_pcb091.dtb \
 	ocelot_pcb120.dtb \
-	ocelot_pcb123.dtb
+	ocelot_pcb123.dtb \
+	serval_pcb105.dtb \
+	serval_pcb106.dtb
+
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
arch/mips/boot/dts/mscc/serval.dtsi new file +153 -0

153 lines not on this page · raw message

arch/mips/boot/dts/mscc/serval_common.dtsi new file +127 -0

127 lines not on this page · raw message

arch/mips/boot/dts/mscc/serval_pcb105.dts new file +17 -0
new file mode 100644
index 000000000000..a1b0012b79d3
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "serval_common.dtsi"
+
+/ {
+	model = "Serval PCB105 Reference Board";
+	compatible = "mscc,serval-pcb105", "mscc,serval";
+
+	aliases {
+	};
+
+};
+
arch/mips/boot/dts/mscc/serval_pcb106.dts new file +17 -0
new file mode 100644
index 000000000000..237be7c8da57
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "serval_common.dtsi"
+
+/ {
+	model = "Serval PCB106 Reference Board";
+	compatible = "mscc,serval-pcb106", "mscc,serval";
+
+	aliases {
+	};
+
+};
+
arch/mips/generic/Kconfig +8 -0
index c7a840b8eaa6..657dd93c5e76 100644
@@ -94,6 +94,14 @@ config FIT_IMAGE_FDT_JAGUAR2
 	  from Microsemi in the FIT kernel image.
 	  This requires u-boot on the platform.
 
+config FIT_IMAGE_FDT_SERVAL
+	bool "Include FDT for Microsemi Serval development platforms"
+	select SOC_VCOREIII
+	help
+	  Enable this to include the FDT for the Serval development platforms
+	  from Microsemi in the FIT kernel image.
+	  This requires u-boot on the platform.
+
 config BOARD_INGENIC
 	bool "Support boards based on Ingenic SoCs"
 	select MACH_INGENIC_GENERIC
arch/mips/generic/Platform +1 -0
index 3f2055bea596..b871af16b5b6 100644
@@ -22,4 +22,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= board-ni169445.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_OCELOT)	+= board-ocelot.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_LUTON)	+= board-luton.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2)	+= board-jaguar2.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_SERVAL)	+= board-serval.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= board-xilfpga.its.S
arch/mips/generic/board-serval.its.S new file +24 -0
new file mode 100644
index 000000000000..4ea4fc9d757f
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+	images {
+		fdt@serval_pcb105 {
+			description = "MSCC Serval PCB105 Device Tree";
+			data = /incbin/("boot/dts/mscc/serval_pcb105.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		pcb105 {
+			description = "Serval Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@serval_pcb105";
+			ramdisk = "ramdisk";
+		};
+	};
+};
Signature · 1 line
2.28.0
maintainer Acked-by on v2 9/9
#19 lore raw

Re: [PATCH v2 9/9] MIPS: mscc: Add serval support

Quoted 8 lines · Gregory CLEMENT

Add a device trees and FIT image support for the Microsemi Serval SoC which belongs to same family of the Ocelot SoC.

It is based on the work of Lars Povlsen <[email protected]>.

You have two SoBs here,

Else

Quoted 431 lines
---
 arch/mips/boot/dts/mscc/Makefile           |   5 +-
 arch/mips/boot/dts/mscc/serval.dtsi        | 153 +++++++++++++++++++++
 arch/mips/boot/dts/mscc/serval_common.dtsi | 127 +++++++++++++++++
 arch/mips/boot/dts/mscc/serval_pcb105.dts  |  17 +++
 arch/mips/boot/dts/mscc/serval_pcb106.dts  |  17 +++
 arch/mips/generic/Kconfig                  |   8 ++
 arch/mips/generic/Platform                 |   1 +
 arch/mips/generic/board-serval.its.S       |  24 ++++
 8 files changed, 351 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts
 create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts
 create mode 100644 arch/mips/generic/board-serval.its.S
arch/mips/boot/dts/mscc/Makefile +4 -1
index befda72ceb26..eeb6b7aae83b 100644
@@ -5,6 +5,9 @@ dtb-$(CONFIG_SOC_VCOREIII)	+= \
 	jaguar2_pcb118.dtb \
 	luton_pcb091.dtb \
 	ocelot_pcb120.dtb \
-	ocelot_pcb123.dtb
+	ocelot_pcb123.dtb \
+	serval_pcb105.dtb \
+	serval_pcb106.dtb
+
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
arch/mips/boot/dts/mscc/serval.dtsi new file +153 -0
new file mode 100644
index 000000000000..089ce89df190
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,serval";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+			device_type = "cpu";
+			clocks = <&cpu_clk>;
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		gpio0 = &gpio;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	cpu_clk: cpu-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <416666666>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&cpu_clk>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	ahb: ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon@70000000 {
+			compatible = "mscc,ocelot-cpu-syscon", "syscon";
+			reg = <0x70000000 0x2c>;
+		};
+
+		intc: interrupt-controller@70000070 {
+			compatible = "mscc,serval-icpu-intr";
+			reg = <0x70000070 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@70100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x70100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		uart2: serial@70100800 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x70100800 0x20>;
+			interrupts = <7>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		gpio: pinctrl@71070034 {
+			compatible = "mscc,serval-pinctrl";
+			reg = <0x71070034 0x28>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 22>;
+
+			sgpio_pins: sgpio-pins {
+				pins = "GPIO_0", "GPIO_2", "GPIO_3", "GPIO_1";
+				function = "sg0";
+			};
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_6", "GPIO_7";
+				function = "twi";
+			};
+
+			uart_pins: uart-pins {
+				pins = "GPIO_26", "GPIO_27";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_13", "GPIO_14";
+				function = "uart2";
+			};
+
+			cs1_pins: cs1-pins {
+				pins = "GPIO_8";
+				function = "si";
+			};
+
+			irqext0_pins: irqext0-pins {
+				pins = "GPIO_28";
+				function = "irq0";
+			};
+
+			irqext1_pins: irqext1-pins {
+				pins = "GPIO_29";
+				function = "irq1";
+			};
+		};
+
+		i2c0: i2c@70100400 {
+			compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x70100400 0x100>, <0x70000190 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <8>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+	};
+};
arch/mips/boot/dts/mscc/serval_common.dtsi new file +127 -0
new file mode 100644
index 000000000000..5b404836db5e
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microsemi Corporation
+ */
+
+#include "serval.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		i2c104  = &i2c104;
+		i2c105  = &i2c105;
+		i2c106  = &i2c106;
+		i2c107  = &i2c107;
+		i2c108  = &i2c108;
+		i2c109  = &i2c109;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c0_imux: i2c0-imux{
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+		pinctrl-names =
+		"i2c104", "i2c105", "i2c106", "i2c107",
+		"i2c108", "i2c109", "idle";
+		pinctrl-0 = <&i2cmux_0>;
+		pinctrl-1 = <&i2cmux_1>;
+		pinctrl-2 = <&i2cmux_2>;
+		pinctrl-3 = <&i2cmux_3>;
+		pinctrl-4 = <&i2cmux_4>;
+		pinctrl-5 = <&i2cmux_5>;
+		pinctrl-6 = <&i2cmux_pins_i>;
+		i2c104: i2c_sfp0@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c105: i2c_sfp1@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c106: i2c_sfp2@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c107: i2c_sfp3@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c108: i2c_sfp4@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c109: i2c_sfp5@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+};
+
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&gpio {
+	i2c_pins: i2c-pins {
+		pins = "GPIO_7"; /* No "default" scl for i2c0 */
+		function = "twi";
+	};
+	i2cmux_pins_i: i2cmux-pins-i {
+		pins = "GPIO_11", "GPIO_12", "GPIO_18", "GPIO_19",
+			"GPIO_20", "GPIO_21";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_0: i2cmux-0 {
+		pins = "GPIO_11";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_1: i2cmux-1 {
+		pins = "GPIO_12";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_2: i2cmux-2 {
+		pins = "GPIO_18";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_3: i2cmux-3 {
+		pins = "GPIO_19";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_4: i2cmux-4 {
+		pins = "GPIO_20";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_5: i2cmux-5 {
+		pins = "GPIO_21";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-sda-hold-time-ns = <300>;
+};
+
arch/mips/boot/dts/mscc/serval_pcb105.dts new file +17 -0
new file mode 100644
index 000000000000..a1b0012b79d3
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "serval_common.dtsi"
+
+/ {
+	model = "Serval PCB105 Reference Board";
+	compatible = "mscc,serval-pcb105", "mscc,serval";
+
+	aliases {
+	};
+
+};
+
arch/mips/boot/dts/mscc/serval_pcb106.dts new file +17 -0
new file mode 100644
index 000000000000..237be7c8da57
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "serval_common.dtsi"
+
+/ {
+	model = "Serval PCB106 Reference Board";
+	compatible = "mscc,serval-pcb106", "mscc,serval";
+
+	aliases {
+	};
+
+};
+
arch/mips/generic/Kconfig +8 -0
index c7a840b8eaa6..657dd93c5e76 100644
@@ -94,6 +94,14 @@ config FIT_IMAGE_FDT_JAGUAR2
 	  from Microsemi in the FIT kernel image.
 	  This requires u-boot on the platform.
 
+config FIT_IMAGE_FDT_SERVAL
+	bool "Include FDT for Microsemi Serval development platforms"
+	select SOC_VCOREIII
+	help
+	  Enable this to include the FDT for the Serval development platforms
+	  from Microsemi in the FIT kernel image.
+	  This requires u-boot on the platform.
+
 config BOARD_INGENIC
 	bool "Support boards based on Ingenic SoCs"
 	select MACH_INGENIC_GENERIC
arch/mips/generic/Platform +1 -0
index 3f2055bea596..b871af16b5b6 100644
@@ -22,4 +22,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= board-ni169445.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_OCELOT)	+= board-ocelot.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_LUTON)	+= board-luton.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2)	+= board-jaguar2.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_SERVAL)	+= board-serval.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= board-xilfpga.its.S
arch/mips/generic/board-serval.its.S new file +24 -0
new file mode 100644
index 000000000000..4ea4fc9d757f
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+	images {
+		fdt@serval_pcb105 {
+			description = "MSCC Serval PCB105 Device Tree";
+			data = /incbin/("boot/dts/mscc/serval_pcb105.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		pcb105 {
+			description = "Serval Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@serval_pcb105";
+			ramdisk = "ramdisk";
+		};
+	};
+};
Signature · 1 line
2.28.0
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#20 lore raw
In reply to Gregory CLEMENT
Quoted 60 lines · Gregory CLEMENT

Hello,

Ocelot SoC belongs to a larger family of SoCs called VCoreIII. Luton, Serval and Jaguar2 are part of this family and are added with this series.

This the second version with a few changes in device tree.

To be able to run a linux kernel the irqchip support and the pinctrl support are needed. Two series of patches adding this support has been posted to their subsystem. However there is no build dependency between them.

Changelog:
v1 -> v2
- Moved the changes in binding documentation from patch 8 to 2
- Fixed i2c devices node name in jaguar2 device tree files
- Added Acked-by from Rob Herring
- Fixes few more devices tree nodes, now there is no more warning when running "make W=1 dtbs"

Gregory

Gregory CLEMENT (9):
dt-bindings: mips: Add Luton
dt-bindings: mips: Add Serval and Jaguar2
MIPS: mscc: Prepare configuration to handle more SoCs
MIPS: mscc: Fix configuration name for ocelot legacy boards
MIPS: mscc: Add luton dtsi
MIPS: mscc: Add luton PC0B91 device tree
MIPS: mscc: build FIT image for Luton
MIPS: mscc: Add jaguar2 support
MIPS: mscc: Add serval support

 .../devicetree/bindings/mips/mscc.txt         |   2 +-
 arch/mips/boot/dts/Makefile                   |   2 +-
 arch/mips/boot/dts/mscc/Makefile              |  11 +-
 arch/mips/boot/dts/mscc/jaguar2.dtsi          | 167 +++++++++++
 arch/mips/boot/dts/mscc/jaguar2_common.dtsi   |  25 ++
 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts    | 267 ++++++++++++++++++
 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts    | 107 +++++++
 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts    |  57 ++++
 arch/mips/boot/dts/mscc/luton.dtsi            | 116 ++++++++
 arch/mips/boot/dts/mscc/luton_pcb091.dts      |  30 ++
 arch/mips/boot/dts/mscc/serval.dtsi           | 153 ++++++++++
 arch/mips/boot/dts/mscc/serval_common.dtsi    | 127 +++++++++
 arch/mips/boot/dts/mscc/serval_pcb105.dts     |  17 ++
 arch/mips/boot/dts/mscc/serval_pcb106.dts     |  17 ++
 arch/mips/generic/Kconfig                     |  37 ++-
 arch/mips/generic/Platform                    |   3 +
 arch/mips/generic/board-jaguar2.its.S         |  40 +++
 arch/mips/generic/board-luton.its.S           |  23 ++
 arch/mips/generic/board-serval.its.S          |  24 ++
 19 files changed, 1218 insertions(+), 7 deletions(-)
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
 create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
 create mode 100644 arch/mips/boot/dts/mscc/luton.dtsi
Quoted 8 lines
 create mode 100644 arch/mips/boot/dts/mscc/luton_pcb091.dts
 create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts
 create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts
 create mode 100644 arch/mips/generic/board-jaguar2.its.S
 create mode 100644 arch/mips/generic/board-luton.its.S
 create mode 100644 arch/mips/generic/board-serval.its.S

series applied to mips-next.

Thomas.

Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]