Skip to contentSkip to conversation

dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

PATCH Superseded Sia Jee Heng 2 participants 19 messages Nov 12, 2020 – Nov 13, 2020

Subsystems (3)

v3 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v3 cover dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

The below patch series are to support AxiDMA running on Intel KeemBay SoC. The base driver is dw-axi-dmac. This driver only support DMA memory copy transfers. Code refactoring is needed so that additional features can be supported.

The features added in this patch series are:
- Replacing Linked List with virtual descriptor management.
- Remove unrelated hw desc stuff from dma memory pool.
- Manage dma memory pool alloc/destroy based on channel activity.
- Support dmaengine device_sync() callback.
- Support dmaengine device_config().
- Support dmaengine device_prep_slave_sg().
- Support dmaengine device_prep_dma_cyclic().
- Support of_dma_controller_register().
- Support burst residue granularity.
- Support Intel KeemBay AxiDMA registers.
- Support Intel KeemBay AxiDMA device handshake.
- Support Intel KeemBay AxiDMA BYTE and HALFWORD device operation.
- Add constraint to Max segment size.

This patch series are tested on Intel KeemBay platform.

v3:
- Added additionalProperties: false to the YAML schemas DT binding.
- Reordered patch sequence for patches 10th, 11th and 12th so that DT binding come first, follow by adding Intel KeemBay SoC registers and update .compatible field.
- Checked txstate NULL condition.
- Created helper function dw_axi_dma_set_hw_desc() to handle common code.

v2:
- Rebased to v5.10-rc1 kernel.
- Added support for dmaengine device_config().
- Added support for dmaengine device_prep_slave_sg().
- Added support for dmaengine device_prep_dma_cyclic().
- Added support for of_dma_controller_register().
- Added support for burst residue granularity.
- Added support for Intel KeemBay AxiDMA registers.
- Added support for Intel KeemBay AxiDMA device handshake.
- Added support for Intel KeemBay AxiDMA BYTE and HALFWORD device operation.
- Added constraint to Max segment size.

v1:
- Initial version. Patch on top of dw-axi-dma driver. This version improve the descriptor management by replacing Linked List Item (LLI) with virtual descriptor management, only allocate hardware LLI memories from DMA memory pool, manage DMA memory pool alloc/destroy based on channel activity and to support device_sync callback.

Sia Jee Heng (15):
dt-bindings: dma: Add YAML schemas for dw-axi-dmac
dmaengine: dw-axi-dmac: simplify descriptor management
dmaengine: dw-axi-dmac: move dma_pool_create() to
alloc_chan_resources()
dmaengine: dw-axi-dmac: Add device_synchronize() callback
dmaengine: dw-axi-dmac: Add device_config operation
dmaengine: dw-axi-dmac: Support device_prep_slave_sg
dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
dmaengine: dw-axi-dmac: Support of_dma_controller_register()
dmaengine: dw-axi-dmac: Support burst residue granularity
dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD
registers
dmaengine: dw-axi-dmac: Set constraint to the Max segment size

 .../bindings/dma/snps,dw-axi-dmac.txt         |  39 --
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 151 ++++
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 642 +++++++++++++++---
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  33 +-
 4 files changed, 731 insertions(+), 134 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
 create mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml

base-commit: 3d5e28bff7ad55aea081c1af516cc1c94a5eca7d

Signature · 1 line
2.18.0
#1 lore raw

PATCH v3 1/15 dt-bindings: dma: Add YAML schemas for dw-axi-dmac

YAML schemas Device Tree (DT) binding is the new format for DT to replace the old format. Introduce YAML schemas DT binding for dw-axi-dmac and remove the old version.

---
 .../bindings/dma/snps,dw-axi-dmac.txt         |  39 ------
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 126 ++++++++++++++++++
 2 files changed, 126 insertions(+), 39 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
 create mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt deleted +0 -39
deleted file mode 100644
index dbe160400adc..000000000000
@@ -1,39 +0,0 @@
-Synopsys DesignWare AXI DMA Controller
-
-Required properties:
-- compatible: "snps,axi-dma-1.01a"
-- reg: Address range of the DMAC registers. This should include
-  all of the per-channel registers.
-- interrupt: Should contain the DMAC interrupt number.
-- dma-channels: Number of channels supported by hardware.
-- snps,dma-masters: Number of AXI masters supported by the hardware.
-- snps,data-width: Maximum AXI data width supported by hardware.
-  (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
-- snps,priority: Priority of channel. Array size is equal to the number of
-  dma-channels. Priority value must be programmed within [0:dma-channels-1]
-  range. (0 - minimum priority)
-- snps,block-size: Maximum block size supported by the controller channel.
-  Array size is equal to the number of dma-channels.
-
-Optional properties:
-- snps,axi-max-burst-len: Restrict master AXI burst length by value specified
-  in this property. If this property is missing the maximum AXI burst length
-  supported by DMAC is used. [1:256]
-
-Example:
-
-dmac: dma-controller@80000 {
-	compatible = "snps,axi-dma-1.01a";
-	reg = <0x80000 0x400>;
-	clocks = <&core_clk>, <&cfgr_clk>;
-	clock-names = "core-clk", "cfgr-clk";
-	interrupt-parent = <&intc>;
-	interrupts = <27>;
-
-	dma-channels = <4>;
-	snps,dma-masters = <2>;
-	snps,data-width = <3>;
-	snps,block-size = <4096 4096 4096 4096>;
-	snps,priority = <0 1 2 3>;
-	snps,axi-max-burst-len = <16>;
-};
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml new file +126 -0

126 lines not on this page · raw message

Signature · 1 line
2.18.0
#2 lore raw

PATCH v3 2/15 dmaengine: dw-axi-dmac: simplify descriptor management

In reply to Sia Jee Heng

Simplify and refactor the descriptor management by removing the redundant Linked List Item (LLI) queue control logic from the AxiDMA driver. The descriptor is split into virtual descriptor and hardware LLI so that only hardware LLI memories are allocated from the DMA memory pool.

Up to 64 descriptors can be allocated within a PAGE_SIZE compare to 16 descriptors in previous version. This solves the problem where an ALSA driver expects more than 16 DMA descriptors to run.

---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 164 ++++++++++--------
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |   9 +-
 2 files changed, 102 insertions(+), 71 deletions(-)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +95 -69
index 14c1ac26f866..8cfd645479e1 100644
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
+#include <linux/slab.h>
 #include <linux/types.h>
 
 #include "dw-axi-dmac.h"
@@ -195,43 +196,58 @@ static inline const char *axi_chan_name(struct axi_dma_chan *chan)
 	return dma_chan_name(&chan->vc.chan);
 }
 
-static struct axi_dma_desc *axi_desc_get(struct axi_dma_chan *chan)
+static struct axi_dma_desc *axi_desc_alloc(u32 num)
 {
-	struct dw_axi_dma *dw = chan->chip->dw;
 	struct axi_dma_desc *desc;
+
+	desc = kzalloc(sizeof(*desc), GFP_NOWAIT);
+	if (!desc)
+		return NULL;
+
+	desc->hw_desc = kcalloc(num, sizeof(*desc->hw_desc), GFP_NOWAIT);
+	if (!desc->hw_desc) {
+		kfree(desc);
+		return NULL;
+	}
+
+	return desc;
+}
+
+static struct axi_dma_lli *axi_desc_get(struct axi_dma_chan *chan,
+					dma_addr_t *addr)
+{
+	struct dw_axi_dma *dw = chan->chip->dw;
+	struct axi_dma_lli *lli;
 	dma_addr_t phys;
 
-	desc = dma_pool_zalloc(dw->desc_pool, GFP_NOWAIT, &phys);
-	if (unlikely(!desc)) {
+	lli = dma_pool_zalloc(dw->desc_pool, GFP_NOWAIT, &phys);
+	if (unlikely(!lli)) {
 		dev_err(chan2dev(chan), "%s: not enough descriptors available\n",
 			axi_chan_name(chan));
 		return NULL;
 	}
 
 	atomic_inc(&chan->descs_allocated);
-	INIT_LIST_HEAD(&desc->xfer_list);
-	desc->vd.tx.phys = phys;
-	desc->chan = chan;
+	*addr = phys;
 
-	return desc;
+	return lli;
 }
 
 static void axi_desc_put(struct axi_dma_desc *desc)
 {
 	struct axi_dma_chan *chan = desc->chan;
 	struct dw_axi_dma *dw = chan->chip->dw;
-	struct axi_dma_desc *child, *_next;
-	unsigned int descs_put = 0;
+	int count = atomic_read(&chan->descs_allocated);
+	struct axi_dma_hw_desc *hw_desc;
+	int descs_put;
 
-	list_for_each_entry_safe(child, _next, &desc->xfer_list, xfer_list) {
-		list_del(&child->xfer_list);
-		dma_pool_free(dw->desc_pool, child, child->vd.tx.phys);
-		descs_put++;
+	for (descs_put = 0; descs_put < count; descs_put++) {
+		hw_desc = &desc->hw_desc[descs_put];
+		dma_pool_free(dw->desc_pool, hw_desc->lli, hw_desc->llp);
 	}
 
-	dma_pool_free(dw->desc_pool, desc, desc->vd.tx.phys);
-	descs_put++;
-
+	kfree(desc->hw_desc);
+	kfree(desc);
 	atomic_sub(descs_put, &chan->descs_allocated);
 	dev_vdbg(chan2dev(chan), "%s: %d descs put, %d still allocated\n",
 		axi_chan_name(chan), descs_put,
@@ -258,9 +274,9 @@ dma_chan_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
 	return ret;
 }
 
-static void write_desc_llp(struct axi_dma_desc *desc, dma_addr_t adr)
+static void write_desc_llp(struct axi_dma_hw_desc *desc, dma_addr_t adr)
 {
-	desc->lli.llp = cpu_to_le64(adr);
+	desc->lli->llp = cpu_to_le64(adr);
 }
 
 static void write_chan_llp(struct axi_dma_chan *chan, dma_addr_t adr)
@@ -295,7 +311,7 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
 	       DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_SRC_POS);
 	axi_chan_iowrite32(chan, CH_CFG_H, reg);
 
-	write_chan_llp(chan, first->vd.tx.phys | lms);
+	write_chan_llp(chan, first->hw_desc[0].llp | lms);
 
 	irq_mask = DWAXIDMAC_IRQ_DMA_TRF | DWAXIDMAC_IRQ_ALL_ERR;
 	axi_chan_irq_sig_set(chan, irq_mask);
@@ -378,67 +394,78 @@ static void dma_chan_free_chan_resources(struct dma_chan *dchan)
  * transfer and completes the DMA transfer operation at the end of current
  * block transfer.
  */
-static void set_desc_last(struct axi_dma_desc *desc)
+static void set_desc_last(struct axi_dma_hw_desc *desc)
 {
 	u32 val;
 
-	val = le32_to_cpu(desc->lli.ctl_hi);
+	val = le32_to_cpu(desc->lli->ctl_hi);
 	val |= CH_CTL_H_LLI_LAST;
-	desc->lli.ctl_hi = cpu_to_le32(val);
+	desc->lli->ctl_hi = cpu_to_le32(val);
 }
 
-static void write_desc_sar(struct axi_dma_desc *desc, dma_addr_t adr)
+static void write_desc_sar(struct axi_dma_hw_desc *desc, dma_addr_t adr)
 {
-	desc->lli.sar = cpu_to_le64(adr);
+	desc->lli->sar = cpu_to_le64(adr);
 }
 
-static void write_desc_dar(struct axi_dma_desc *desc, dma_addr_t adr)
+static void write_desc_dar(struct axi_dma_hw_desc *desc, dma_addr_t adr)
 {
-	desc->lli.dar = cpu_to_le64(adr);
+	desc->lli->dar = cpu_to_le64(adr);
 }
 
-static void set_desc_src_master(struct axi_dma_desc *desc)
+static void set_desc_src_master(struct axi_dma_hw_desc *desc)
 {
 	u32 val;
 
 	/* Select AXI0 for source master */
-	val = le32_to_cpu(desc->lli.ctl_lo);
+	val = le32_to_cpu(desc->lli->ctl_lo);
 	val &= ~CH_CTL_L_SRC_MAST;
-	desc->lli.ctl_lo = cpu_to_le32(val);
+	desc->lli->ctl_lo = cpu_to_le32(val);
 }
 
-static void set_desc_dest_master(struct axi_dma_desc *desc)
+static void set_desc_dest_master(struct axi_dma_hw_desc *hw_desc,
+				 struct axi_dma_desc *desc)
 {
 	u32 val;
 
 	/* Select AXI1 for source master if available */
-	val = le32_to_cpu(desc->lli.ctl_lo);
+	val = le32_to_cpu(hw_desc->lli->ctl_lo);
 	if (desc->chan->chip->dw->hdata->nr_masters > 1)
 		val |= CH_CTL_L_DST_MAST;
 	else
 		val &= ~CH_CTL_L_DST_MAST;
 
-	desc->lli.ctl_lo = cpu_to_le32(val);
+	hw_desc->lli->ctl_lo = cpu_to_le32(val);
 }
 
 static struct dma_async_tx_descriptor *
 dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 			 dma_addr_t src_adr, size_t len, unsigned long flags)
 {
-	struct axi_dma_desc *first = NULL, *desc = NULL, *prev = NULL;
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
 	size_t block_ts, max_block_ts, xfer_len;
-	u32 xfer_width, reg;
+	struct axi_dma_hw_desc *hw_desc = NULL;
+	struct axi_dma_desc *desc = NULL;
+	u32 xfer_width, reg, num;
+	u64 llp = 0;
 	u8 lms = 0; /* Select AXI0 master for LLI fetching */
 
 	dev_dbg(chan2dev(chan), "%s: memcpy: src: %pad dst: %pad length: %zd flags: %#lx",
 		axi_chan_name(chan), &src_adr, &dst_adr, len, flags);
 
 	max_block_ts = chan->chip->dw->hdata->block_size[chan->id];
+	xfer_width = axi_chan_get_xfer_width(chan, src_adr, dst_adr, len);
+	num = DIV_ROUND_UP(len, max_block_ts << xfer_width);
+	desc = axi_desc_alloc(num);
+	if (unlikely(!desc))
+		goto err_desc_get;
 
+	desc->chan = chan;
+	num = 0;
 	while (len) {
 		xfer_len = len;
 
+		hw_desc = &desc->hw_desc[num];
 		/*
 		 * Take care for the alignment.
 		 * Actually source and destination widths can be different, but
@@ -457,13 +484,13 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 			xfer_len = max_block_ts << xfer_width;
 		}
 
-		desc = axi_desc_get(chan);
-		if (unlikely(!desc))
+		hw_desc->lli = axi_desc_get(chan, &hw_desc->llp);
+		if (unlikely(!hw_desc->lli))
 			goto err_desc_get;
 
-		write_desc_sar(desc, src_adr);
-		write_desc_dar(desc, dst_adr);
-		desc->lli.block_ts_lo = cpu_to_le32(block_ts - 1);
+		write_desc_sar(hw_desc, src_adr);
+		write_desc_dar(hw_desc, dst_adr);
+		hw_desc->lli->block_ts_lo = cpu_to_le32(block_ts - 1);
 
 		reg = CH_CTL_H_LLI_VALID;
 		if (chan->chip->dw->hdata->restrict_axi_burst_len) {
@@ -474,7 +501,7 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 				CH_CTL_H_AWLEN_EN |
 				burst_len << CH_CTL_H_AWLEN_POS);
 		}
-		desc->lli.ctl_hi = cpu_to_le32(reg);
+		hw_desc->lli->ctl_hi = cpu_to_le32(reg);
 
 		reg = (DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
 		       DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS |
@@ -482,62 +509,61 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 		       xfer_width << CH_CTL_L_SRC_WIDTH_POS |
 		       DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
 		       DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS);
-		desc->lli.ctl_lo = cpu_to_le32(reg);
+		hw_desc->lli->ctl_lo = cpu_to_le32(reg);
 
-		set_desc_src_master(desc);
-		set_desc_dest_master(desc);
+		set_desc_src_master(hw_desc);
+		set_desc_dest_master(hw_desc, desc);
 
-		/* Manage transfer list (xfer_list) */
-		if (!first) {
-			first = desc;
-		} else {
-			list_add_tail(&desc->xfer_list, &first->xfer_list);
-			write_desc_llp(prev, desc->vd.tx.phys | lms);
-		}
-		prev = desc;
 
 		/* update the length and addresses for the next loop cycle */
 		len -= xfer_len;
 		dst_adr += xfer_len;
 		src_adr += xfer_len;
+		num++;
 	}
 
 	/* Total len of src/dest sg == 0, so no descriptor were allocated */
-	if (unlikely(!first))
+	if (unlikely(!desc))
 		return NULL;
 
 	/* Set end-of-link to the last link descriptor of list */
-	set_desc_last(desc);
+	set_desc_last(&desc->hw_desc[num - 1]);
+	/* Managed transfer list */
+	do {
+		hw_desc = &desc->hw_desc[--num];
+		write_desc_llp(hw_desc, llp | lms);
+		llp = hw_desc->llp;
+	} while (num);
 
-	return vchan_tx_prep(&chan->vc, &first->vd, flags);
+	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
 
 err_desc_get:
-	if (first)
-		axi_desc_put(first);
+	if (desc)
+		axi_desc_put(desc);
 	return NULL;
 }
 
 static void axi_chan_dump_lli(struct axi_dma_chan *chan,
-			      struct axi_dma_desc *desc)
+			      struct axi_dma_hw_desc *desc)
 {
 	dev_err(dchan2dev(&chan->vc.chan),
 		"SAR: 0x%llx DAR: 0x%llx LLP: 0x%llx BTS 0x%x CTL: 0x%x:%08x",
-		le64_to_cpu(desc->lli.sar),
-		le64_to_cpu(desc->lli.dar),
-		le64_to_cpu(desc->lli.llp),
-		le32_to_cpu(desc->lli.block_ts_lo),
-		le32_to_cpu(desc->lli.ctl_hi),
-		le32_to_cpu(desc->lli.ctl_lo));
+		le64_to_cpu(desc->lli->sar),
+		le64_to_cpu(desc->lli->dar),
+		le64_to_cpu(desc->lli->llp),
+		le32_to_cpu(desc->lli->block_ts_lo),
+		le32_to_cpu(desc->lli->ctl_hi),
+		le32_to_cpu(desc->lli->ctl_lo));
 }
 
 static void axi_chan_list_dump_lli(struct axi_dma_chan *chan,
 				   struct axi_dma_desc *desc_head)
 {
-	struct axi_dma_desc *desc;
+	int count = atomic_read(&chan->descs_allocated);
+	int i;
 
-	axi_chan_dump_lli(chan, desc_head);
-	list_for_each_entry(desc, &desc_head->xfer_list, xfer_list)
-		axi_chan_dump_lli(chan, desc);
+	for (i = 0; i < count; i++)
+		axi_chan_dump_lli(chan, &desc_head->hw_desc[i]);
 }
 
 static noinline void axi_chan_handle_err(struct axi_dma_chan *chan, u32 status)
@@ -872,7 +898,7 @@ static int dw_probe(struct platform_device *pdev)
 
 	/* Lli address must be aligned to a 64-byte boundary */
 	dw->desc_pool = dmam_pool_create(KBUILD_MODNAME, chip->dev,
-					 sizeof(struct axi_dma_desc), 64, 0);
+					 sizeof(struct axi_dma_lli), 64, 0);
 	if (!dw->desc_pool) {
 		dev_err(chip->dev, "No memory for descriptors dma pool\n");
 		return -ENOMEM;
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +7 -2
index 18b6014cf9b4..41e775e6e593 100644
@@ -41,6 +41,7 @@ struct axi_dma_chan {
 
 	struct virt_dma_chan		vc;
 
+	struct axi_dma_desc		*desc;
 	/* these other elements are all protected by vc.lock */
 	bool				is_paused;
 };
@@ -80,12 +81,16 @@ struct __packed axi_dma_lli {
 	__le32		reserved_hi;
 };
 
+struct axi_dma_hw_desc {
+	struct axi_dma_lli	*lli;
+	dma_addr_t		llp;
+};
+
 struct axi_dma_desc {
-	struct axi_dma_lli		lli;
+	struct axi_dma_hw_desc	*hw_desc;
 
 	struct virt_dma_desc		vd;
 	struct axi_dma_chan		*chan;
-	struct list_head		xfer_list;
 };
 
 static inline struct device *dchan2dev(struct dma_chan *dchan)
Signature · 1 line
2.18.0
#3 lore raw

PATCH v3 3/15 dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources()

In reply to Sia Jee Heng

The DMA memory block is created at driver load time and exist for device lifetime. Move the dma_pool_create() to the ->chan_resource() callback function allowing the DMA memory blocks to be created as needed and destroyed when the channel is freed.

---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 24 ++++++++++---------
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  2 +-
 2 files changed, 14 insertions(+), 12 deletions(-)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +13 -11
index 8cfd645479e1..46e2ba978e20 100644
@@ -216,11 +216,10 @@ static struct axi_dma_desc *axi_desc_alloc(u32 num)
 static struct axi_dma_lli *axi_desc_get(struct axi_dma_chan *chan,
 					dma_addr_t *addr)
 {
-	struct dw_axi_dma *dw = chan->chip->dw;
 	struct axi_dma_lli *lli;
 	dma_addr_t phys;
 
-	lli = dma_pool_zalloc(dw->desc_pool, GFP_NOWAIT, &phys);
+	lli = dma_pool_zalloc(chan->desc_pool, GFP_NOWAIT, &phys);
 	if (unlikely(!lli)) {
 		dev_err(chan2dev(chan), "%s: not enough descriptors available\n",
 			axi_chan_name(chan));
@@ -236,14 +235,13 @@ static struct axi_dma_lli *axi_desc_get(struct axi_dma_chan *chan,
 static void axi_desc_put(struct axi_dma_desc *desc)
 {
 	struct axi_dma_chan *chan = desc->chan;
-	struct dw_axi_dma *dw = chan->chip->dw;
 	int count = atomic_read(&chan->descs_allocated);
 	struct axi_dma_hw_desc *hw_desc;
 	int descs_put;
 
 	for (descs_put = 0; descs_put < count; descs_put++) {
 		hw_desc = &desc->hw_desc[descs_put];
-		dma_pool_free(dw->desc_pool, hw_desc->lli, hw_desc->llp);
+		dma_pool_free(chan->desc_pool, hw_desc->lli, hw_desc->llp);
 	}
 
 	kfree(desc->hw_desc);
@@ -360,6 +358,15 @@ static int dma_chan_alloc_chan_resources(struct dma_chan *dchan)
 		return -EBUSY;
 	}
 
+	/* LLI address must be aligned to a 64-byte boundary */
+	chan->desc_pool = dma_pool_create(dev_name(chan2dev(chan)),
+					  chan->chip->dev,
+					  sizeof(struct axi_dma_lli),
+					  64, 0);
+	if (!chan->desc_pool) {
+		dev_err(chan2dev(chan), "No memory for descriptors\n");
+		return -ENOMEM;
+	}
 	dev_vdbg(dchan2dev(dchan), "%s: allocating\n", axi_chan_name(chan));
 
 	pm_runtime_get(chan->chip->dev);
@@ -381,6 +388,8 @@ static void dma_chan_free_chan_resources(struct dma_chan *dchan)
 
 	vchan_free_chan_resources(&chan->vc);
 
+	dma_pool_destroy(chan->desc_pool);
+	chan->desc_pool = NULL;
 	dev_vdbg(dchan2dev(dchan),
 		 "%s: free resources, descriptor still allocated: %u\n",
 		 axi_chan_name(chan), atomic_read(&chan->descs_allocated));
@@ -896,13 +905,6 @@ static int dw_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/* Lli address must be aligned to a 64-byte boundary */
-	dw->desc_pool = dmam_pool_create(KBUILD_MODNAME, chip->dev,
-					 sizeof(struct axi_dma_lli), 64, 0);
-	if (!dw->desc_pool) {
-		dev_err(chip->dev, "No memory for descriptors dma pool\n");
-		return -ENOMEM;
-	}
 
 	INIT_LIST_HEAD(&dw->dma.channels);
 	for (i = 0; i < hdata->nr_channels; i++) {
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +1 -1
index 41e775e6e593..f886b2bb75de 100644
@@ -39,6 +39,7 @@ struct axi_dma_chan {
 	u8				id;
 	atomic_t			descs_allocated;
 
+	struct dma_pool			*desc_pool;
 	struct virt_dma_chan		vc;
 
 	struct axi_dma_desc		*desc;
@@ -49,7 +50,6 @@ struct axi_dma_chan {
 struct dw_axi_dma {
 	struct dma_device	dma;
 	struct dw_axi_dma_hcfg	*hdata;
-	struct dma_pool		*desc_pool;
 
 	/* channels */
 	struct axi_dma_chan	*chan;
Signature · 1 line
2.18.0
#4 lore raw

PATCH v3 4/15 dmaengine: dw-axi-dmac: Add device_synchronize() callback

In reply to Sia Jee Heng

Add support for device_synchronize() callback function to sync with dmaengine_terminate_sync().

---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +8 -0
index 46e2ba978e20..56b213211341 100644
@@ -347,6 +347,13 @@ static void dma_chan_issue_pending(struct dma_chan *dchan)
 	spin_unlock_irqrestore(&chan->vc.lock, flags);
 }
 
+static void dw_axi_dma_synchronize(struct dma_chan *dchan)
+{
+	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+
+	vchan_synchronize(&chan->vc);
+}
+
 static int dma_chan_alloc_chan_resources(struct dma_chan *dchan)
 {
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
@@ -940,6 +947,7 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.device_free_chan_resources = dma_chan_free_chan_resources;
 
 	dw->dma.device_prep_dma_memcpy = dma_chan_prep_dma_memcpy;
+	dw->dma.device_synchronize = dw_axi_dma_synchronize;
 
 	platform_set_drvdata(pdev, chip);
 
Signature · 1 line
2.18.0
#5 lore raw

PATCH v3 5/15 dmaengine: dw-axi-dmac: Add device_config operation

In reply to Sia Jee Heng

Add device_config() callback function so that the device address can be passed to the dma driver.

DMA clients use this interface to pass in the device address to the AxiDMA. Without this interface, data transfer between device to memory and memory to device would failed.

---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 11 +++++++++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h          |  1 +
 2 files changed, 12 insertions(+)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +11 -0
index 56b213211341..16e6934ae9a1 100644
@@ -559,6 +559,16 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 	return NULL;
 }
 
+static int dw_axi_dma_chan_slave_config(struct dma_chan *dchan,
+					struct dma_slave_config *config)
+{
+	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+
+	memcpy(&chan->config, config, sizeof(*config));
+
+	return 0;
+}
+
 static void axi_chan_dump_lli(struct axi_dma_chan *chan,
 			      struct axi_dma_hw_desc *desc)
 {
@@ -948,6 +958,7 @@ static int dw_probe(struct platform_device *pdev)
 
 	dw->dma.device_prep_dma_memcpy = dma_chan_prep_dma_memcpy;
 	dw->dma.device_synchronize = dw_axi_dma_synchronize;
+	dw->dma.device_config = dw_axi_dma_chan_slave_config;
 
 	platform_set_drvdata(pdev, chip);
 
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +1 -0
index f886b2bb75de..a75b921d6b1a 100644
@@ -43,6 +43,7 @@ struct axi_dma_chan {
 	struct virt_dma_chan		vc;
 
 	struct axi_dma_desc		*desc;
+	struct dma_slave_config		config;
 	/* these other elements are all protected by vc.lock */
 	bool				is_paused;
 };
Signature · 1 line
2.18.0
#6 lore raw

PATCH v3 6/15 dmaengine: dw-axi-dmac: Support device_prep_slave_sg

In reply to Sia Jee Heng

Add device_prep_slave_sg() callback function so that DMA_MEM_TO_DEV and DMA_DEV_TO_MEM operations in single mode can be supported.

Existing AxiDMA driver only support data transfer between memory to memory. Data transfer between device to memory and memory to device in single mode would failed if this interface is not supported by the AxiDMA driver.

---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 157 ++++++++++++++++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |   1 +
 2 files changed, 158 insertions(+)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +157 -0
index 16e6934ae9a1..b5299d763a43 100644
@@ -307,6 +307,22 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
 	       priority << CH_CFG_H_PRIORITY_POS |
 	       DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_DST_POS |
 	       DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_SRC_POS);
+	switch (chan->direction) {
+	case DMA_MEM_TO_DEV:
+		reg |= (chan->config.device_fc ?
+			DWAXIDMAC_TT_FC_MEM_TO_PER_DST :
+			DWAXIDMAC_TT_FC_MEM_TO_PER_DMAC)
+			<< CH_CFG_H_TT_FC_POS;
+		break;
+	case DMA_DEV_TO_MEM:
+		reg |= (chan->config.device_fc ?
+			DWAXIDMAC_TT_FC_PER_TO_MEM_SRC :
+			DWAXIDMAC_TT_FC_PER_TO_MEM_DMAC)
+			<< CH_CFG_H_TT_FC_POS;
+		break;
+	default:
+		break;
+	}
 	axi_chan_iowrite32(chan, CH_CFG_H, reg);
 
 	write_chan_llp(chan, first->hw_desc[0].llp | lms);
@@ -454,6 +470,144 @@ static void set_desc_dest_master(struct axi_dma_hw_desc *hw_desc,
 	hw_desc->lli->ctl_lo = cpu_to_le32(val);
 }
 
+static int dw_axi_dma_set_hw_desc(struct axi_dma_chan *chan,
+				  struct axi_dma_hw_desc *hw_desc,
+				  dma_addr_t mem_addr, size_t len)
+{
+	unsigned int data_width = BIT(chan->chip->dw->hdata->m_data_width);
+	unsigned int reg_width;
+	unsigned int mem_width;
+	dma_addr_t device_addr;
+	size_t axi_block_ts;
+	size_t block_ts;
+	u32 ctllo, ctlhi;
+	u32 burst_len;
+
+	axi_block_ts = chan->chip->dw->hdata->block_size[chan->id];
+
+	mem_width = __ffs(data_width | mem_addr | len);
+	if (mem_width > DWAXIDMAC_TRANS_WIDTH_32)
+		mem_width = DWAXIDMAC_TRANS_WIDTH_32;
+
+	switch (chan->direction) {
+	case DMA_MEM_TO_DEV:
+		reg_width = __ffs(chan->config.dst_addr_width);
+		device_addr = chan->config.dst_addr;
+		ctllo = reg_width << CH_CTL_L_DST_WIDTH_POS |
+			mem_width << CH_CTL_L_SRC_WIDTH_POS |
+			DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_DST_INC_POS |
+			DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS;
+		block_ts = len >> mem_width;
+		break;
+	case DMA_DEV_TO_MEM:
+		reg_width = __ffs(chan->config.src_addr_width);
+		device_addr = chan->config.src_addr;
+		ctllo = reg_width << CH_CTL_L_SRC_WIDTH_POS |
+			mem_width << CH_CTL_L_DST_WIDTH_POS |
+			DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
+			DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_SRC_INC_POS;
+		block_ts = len >> reg_width;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (block_ts > axi_block_ts)
+		return -EINVAL;
+
+	hw_desc->lli = axi_desc_get(chan, &hw_desc->llp);
+	if (unlikely(!hw_desc->lli))
+		return -ENOMEM;
+
+	ctlhi = CH_CTL_H_LLI_VALID;
+
+	if (chan->chip->dw->hdata->restrict_axi_burst_len) {
+		burst_len = chan->chip->dw->hdata->axi_rw_burst_len;
+		ctlhi |= CH_CTL_H_ARLEN_EN | CH_CTL_H_AWLEN_EN |
+			 burst_len << CH_CTL_H_ARLEN_POS |
+			 burst_len << CH_CTL_H_AWLEN_POS;
+	}
+
+	hw_desc->lli->ctl_hi = cpu_to_le32(ctlhi);
+
+	if (chan->direction == DMA_MEM_TO_DEV) {
+		write_desc_sar(hw_desc, mem_addr);
+		write_desc_dar(hw_desc, device_addr);
+	} else {
+		write_desc_sar(hw_desc, device_addr);
+		write_desc_dar(hw_desc, mem_addr);
+	}
+
+	hw_desc->lli->block_ts_lo = cpu_to_le32(block_ts - 1);
+
+	ctllo |= DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
+		 DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS;
+	hw_desc->lli->ctl_lo = cpu_to_le32(ctllo);
+
+	set_desc_src_master(hw_desc);
+
+	return 0;
+}
+
+static struct dma_async_tx_descriptor *
+dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
+			      unsigned int sg_len,
+			      enum dma_transfer_direction direction,
+			      unsigned long flags, void *context)
+{
+	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+	struct axi_dma_hw_desc *hw_desc = NULL;
+	struct axi_dma_desc *desc = NULL;
+	struct scatterlist *sg;
+	unsigned int i;
+	u32 mem, len;
+	int status;
+	u64 llp = 0;
+	u8 lms = 0; /* Select AXI0 master for LLI fetching */
+
+	if (unlikely(!is_slave_direction(direction) || !sg_len))
+		return NULL;
+
+	chan->direction = direction;
+
+	desc = axi_desc_alloc(sg_len);
+	if (unlikely(!desc))
+		goto err_desc_get;
+
+	desc->chan = chan;
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		mem = sg_dma_address(sg);
+		len = sg_dma_len(sg);
+		hw_desc = &desc->hw_desc[i];
+
+		status = dw_axi_dma_set_hw_desc(chan, hw_desc, mem, len);
+		if (status < 0)
+			goto err_desc_get;
+	}
+
+	if (unlikely(!desc))
+		return NULL;
+
+	/* Set end-of-link to the last link descriptor of list */
+	set_desc_last(&desc->hw_desc[sg_len - 1]);
+
+	/* Managed transfer list */
+	do {
+		hw_desc = &desc->hw_desc[--sg_len];
+		write_desc_llp(hw_desc, llp | lms);
+		llp = hw_desc->llp;
+	} while (sg_len);
+
+	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
+
+err_desc_get:
+	if (desc)
+		axi_desc_put(desc);
+
+	return NULL;
+}
+
 static struct dma_async_tx_descriptor *
 dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 			 dma_addr_t src_adr, size_t len, unsigned long flags)
@@ -938,12 +1092,14 @@ static int dw_probe(struct platform_device *pdev)
 
 	/* Set capabilities */
 	dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
+	dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
 
 	/* DMA capabilities */
 	dw->dma.chancnt = hdata->nr_channels;
 	dw->dma.src_addr_widths = AXI_DMA_BUSWIDTHS;
 	dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
 	dw->dma.directions = BIT(DMA_MEM_TO_MEM);
+	dw->dma.directions |= BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM);
 	dw->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
 
 	dw->dma.dev = chip->dev;
@@ -959,6 +1115,7 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.device_prep_dma_memcpy = dma_chan_prep_dma_memcpy;
 	dw->dma.device_synchronize = dw_axi_dma_synchronize;
 	dw->dma.device_config = dw_axi_dma_chan_slave_config;
+	dw->dma.device_prep_slave_sg = dw_axi_dma_chan_prep_slave_sg;
 
 	platform_set_drvdata(pdev, chip);
 
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +1 -0
index a75b921d6b1a..ac49f2e14b0c 100644
@@ -44,6 +44,7 @@ struct axi_dma_chan {
 
 	struct axi_dma_desc		*desc;
 	struct dma_slave_config		config;
+	enum dma_transfer_direction	direction;
 	/* these other elements are all protected by vc.lock */
 	bool				is_paused;
 };
Signature · 1 line
2.18.0
#7 lore raw

PATCH v3 7/15 dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()

In reply to Sia Jee Heng

Add support for device_prep_dma_cyclic() callback function to benefit DMA cyclic client, for example ALSA.

Existing AxiDMA driver only support data transfer between memory to memory. Data transfer between device to memory and memory to device in cyclic mode would failed if this interface is not supported by the AxiDMA driver.

---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 114 ++++++++++++++++--
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |   2 +
 2 files changed, 109 insertions(+), 7 deletions(-)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +107 -7
index b5299d763a43..6ead1a804905 100644
@@ -15,6 +15,8 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -549,6 +551,67 @@ static int dw_axi_dma_set_hw_desc(struct axi_dma_chan *chan,
 	return 0;
 }
 
+static struct dma_async_tx_descriptor *
+dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
+			    size_t buf_len, size_t period_len,
+			    enum dma_transfer_direction direction,
+			    unsigned long flags)
+{
+	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+	struct axi_dma_hw_desc *hw_desc = NULL;
+	struct axi_dma_desc *desc = NULL;
+	dma_addr_t src_addr = dma_addr;
+	u32 num_periods = buf_len / period_len;
+	unsigned int i;
+	int status;
+	u64 llp = 0;
+	u8 lms = 0; /* Select AXI0 master for LLI fetching */
+
+	desc = axi_desc_alloc(num_periods);
+	if (unlikely(!desc))
+		goto err_desc_get;
+
+	chan->direction = direction;
+	desc->chan = chan;
+	chan->cyclic = true;
+
+	for (i = 0; i < num_periods; i++) {
+		hw_desc = &desc->hw_desc[i];
+
+		status = dw_axi_dma_set_hw_desc(chan, hw_desc, src_addr,
+						period_len);
+		if (status < 0)
+			goto err_desc_get;
+
+		/* Set end-of-link to the linked descriptor, so that cyclic
+		 * callback function can be triggered during interrupt.
+		 */
+		set_desc_last(hw_desc);
+
+		src_addr += period_len;
+	}
+
+	if (unlikely(!desc))
+		return NULL;
+
+	llp = desc->hw_desc[0].llp;
+
+	/* Managed transfer list */
+	do {
+		hw_desc = &desc->hw_desc[--num_periods];
+		write_desc_llp(hw_desc, llp | lms);
+		llp = hw_desc->llp;
+	} while (num_periods);
+
+	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
+
+err_desc_get:
+	if (desc)
+		axi_desc_put(desc);
+
+	return NULL;
+}
+
 static struct dma_async_tx_descriptor *
 dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 			      unsigned int sg_len,
@@ -776,8 +839,13 @@ static noinline void axi_chan_handle_err(struct axi_dma_chan *chan, u32 status)
 
 static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
 {
+	int count = atomic_read(&chan->descs_allocated);
+	struct axi_dma_hw_desc *hw_desc;
+	struct axi_dma_desc *desc;
 	struct virt_dma_desc *vd;
 	unsigned long flags;
+	u64 llp;
+	int i;
 
 	spin_lock_irqsave(&chan->vc.lock, flags);
 	if (unlikely(axi_chan_is_hw_enable(chan))) {
@@ -788,12 +856,32 @@ static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
 
 	/* The completed descriptor currently is in the head of vc list */
 	vd = vchan_next_desc(&chan->vc);
-	/* Remove the completed descriptor from issued list before completing */
-	list_del(&vd->node);
-	vchan_cookie_complete(vd);
 
-	/* Submit queued descriptors after processing the completed ones */
-	axi_chan_start_first_queued(chan);
+	if (chan->cyclic) {
+		vchan_cyclic_callback(vd);
+		desc = vd_to_axi_desc(vd);
+		if (desc) {
+			llp = lo_hi_readq(chan->chan_regs + CH_LLP);
+			for (i = 0; i < count; i++) {
+				hw_desc = &desc->hw_desc[i];
+				if (hw_desc->llp == llp) {
+					axi_chan_irq_clear(chan, hw_desc->lli->status_lo);
+					hw_desc->lli->ctl_hi |= CH_CTL_H_LLI_VALID;
+					desc->completed_blocks = i;
+					break;
+				}
+			}
+
+			axi_chan_enable(chan);
+		}
+	} else {
+		/* Remove the completed descriptor from issued list before completing */
+		list_del(&vd->node);
+		vchan_cookie_complete(vd);
+
+		/* Submit queued descriptors after processing the completed ones */
+		axi_chan_start_first_queued(chan);
+	}
 
 	spin_unlock_irqrestore(&chan->vc.lock, flags);
 }
@@ -833,15 +921,25 @@ static irqreturn_t dw_axi_dma_interrupt(int irq, void *dev_id)
 static int dma_chan_terminate_all(struct dma_chan *dchan)
 {
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+	u32 chan_active = BIT(chan->id) << DMAC_CHAN_EN_SHIFT;
 	unsigned long flags;
+	u32 val;
+	int ret;
 	LIST_HEAD(head);
 
-	spin_lock_irqsave(&chan->vc.lock, flags);
-
 	axi_chan_disable(chan);
 
+	ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
+					!(val & chan_active), 1000, 10000);
+	if (ret == -ETIMEDOUT)
+		dev_warn(dchan2dev(dchan),
+			 "%s failed to stop\n", axi_chan_name(chan));
+
+	spin_lock_irqsave(&chan->vc.lock, flags);
+
 	vchan_get_all_descriptors(&chan->vc, &head);
 
+	chan->cyclic = false;
 	spin_unlock_irqrestore(&chan->vc.lock, flags);
 
 	vchan_dma_desc_free_list(&chan->vc, &head);
@@ -1093,6 +1191,7 @@ static int dw_probe(struct platform_device *pdev)
 	/* Set capabilities */
 	dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
 	dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
+	dma_cap_set(DMA_CYCLIC, dw->dma.cap_mask);
 
 	/* DMA capabilities */
 	dw->dma.chancnt = hdata->nr_channels;
@@ -1116,6 +1215,7 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.device_synchronize = dw_axi_dma_synchronize;
 	dw->dma.device_config = dw_axi_dma_chan_slave_config;
 	dw->dma.device_prep_slave_sg = dw_axi_dma_chan_prep_slave_sg;
+	dw->dma.device_prep_dma_cyclic = dw_axi_dma_chan_prep_cyclic;
 
 	platform_set_drvdata(pdev, chip);
 
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +2 -0
index ac49f2e14b0c..a26b0a242a93 100644
@@ -45,6 +45,7 @@ struct axi_dma_chan {
 	struct axi_dma_desc		*desc;
 	struct dma_slave_config		config;
 	enum dma_transfer_direction	direction;
+	bool				cyclic;
 	/* these other elements are all protected by vc.lock */
 	bool				is_paused;
 };
@@ -93,6 +94,7 @@ struct axi_dma_desc {
 
 	struct virt_dma_desc		vd;
 	struct axi_dma_chan		*chan;
+	u32				completed_blocks;
 };
 
 static inline struct device *dchan2dev(struct dma_chan *dchan)
Signature · 1 line
2.18.0
#8 lore raw

PATCH v3 8/15 dmaengine: dw-axi-dmac: Support of_dma_controller_register()

In reply to Sia Jee Heng

Add support for of_dma_controller_register() so that DMA clients can pass in device handshake number to the AxiDMA driver.

DMA clients shall code the device handshake number in the Device tree. When DMA activities are needed, DMA clients shall invoke OF helper function to pass in the device handshake number to the AxiDMA.

Without register to the of_dma_controller_register(), data transfer between memory to device and device to memory operations would failed.

---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 26 +++++++++++++++++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  1 +
 2 files changed, 27 insertions(+)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +26 -0
index 6ead1a804905..19fc6d2dfd5c 100644
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_dma.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
@@ -1050,6 +1051,22 @@ static int __maybe_unused axi_dma_runtime_resume(struct device *dev)
 	return axi_dma_resume(chip);
 }
 
+static struct dma_chan *dw_axi_dma_of_xlate(struct of_phandle_args *dma_spec,
+					    struct of_dma *ofdma)
+{
+	struct dw_axi_dma *dw = ofdma->of_dma_data;
+	struct axi_dma_chan *chan;
+	struct dma_chan *dchan;
+
+	dchan = dma_get_any_slave_channel(&dw->dma);
+	if (!dchan)
+		return NULL;
+
+	chan = dchan_to_axi_dma_chan(dchan);
+	chan->hw_hs_num = dma_spec->args[0];
+	return dchan;
+}
+
 static int parse_device_properties(struct axi_dma_chip *chip)
 {
 	struct device *dev = chip->dev;
@@ -1239,6 +1256,13 @@ static int dw_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_pm_disable;
 
+	/* Register with OF helpers for DMA lookups */
+	ret = of_dma_controller_register(pdev->dev.of_node,
+					 dw_axi_dma_of_xlate, dw);
+	if (ret < 0)
+		dev_warn(&pdev->dev,
+			 "Failed to register OF DMA controller, fallback to MEM_TO_MEM mode\n");
+
 	dev_info(chip->dev, "DesignWare AXI DMA Controller, %d channels\n",
 		 dw->hdata->nr_channels);
 
@@ -1272,6 +1296,8 @@ static int dw_remove(struct platform_device *pdev)
 
 	devm_free_irq(chip->dev, chip->irq, chip);
 
+	of_dma_controller_free(chip->dev->of_node);
+
 	list_for_each_entry_safe(chan, _chan, &dw->dma.channels,
 			vc.chan.device_node) {
 		list_del(&chan->vc.chan.device_node);
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +1 -0
index a26b0a242a93..651874e5c88f 100644
@@ -37,6 +37,7 @@ struct axi_dma_chan {
 	struct axi_dma_chip		*chip;
 	void __iomem			*chan_regs;
 	u8				id;
+	u8				hw_hs_num;
 	atomic_t			descs_allocated;
 
 	struct dma_pool			*desc_pool;
Signature · 1 line
2.18.0
#9 lore raw

PATCH v3 9/15 dmaengine: dw-axi-dmac: Support burst residue granularity

In reply to Sia Jee Heng

Add support for DMA_RESIDUE_GRANULARITY_BURST so that AxiDMA can report DMA residue.

Existing AxiDMA driver only support data transfer between memory to memory operation, therefore reporting DMA residue to the DMA clients is not supported.

Reporting DMA residue to the DMA clients is important as DMA clients shall invoke dmaengine_tx_status() to understand the number of bytes been transferred so that the buffer pointer can be updated accordingly.

---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 43 ++++++++++++++++---
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  2 +
 2 files changed, 38 insertions(+), 7 deletions(-)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +36 -7
index 19fc6d2dfd5c..d82583e28a99 100644
@@ -265,14 +265,36 @@ dma_chan_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
 		  struct dma_tx_state *txstate)
 {
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
-	enum dma_status ret;
+	struct virt_dma_desc *vdesc;
+	enum dma_status status;
+	u32 completed_length;
+	unsigned long flags;
+	u32 completed_blocks;
+	size_t bytes = 0;
+	u32 length;
+	u32 len;
 
-	ret = dma_cookie_status(dchan, cookie, txstate);
+	status = dma_cookie_status(dchan, cookie, txstate);
+	if (status == DMA_COMPLETE || !txstate)
+		return status;
 
-	if (chan->is_paused && ret == DMA_IN_PROGRESS)
-		ret = DMA_PAUSED;
+	spin_lock_irqsave(&chan->vc.lock, flags);
 
-	return ret;
+	vdesc = vchan_find_desc(&chan->vc, cookie);
+	if (vdesc) {
+		length = vd_to_axi_desc(vdesc)->length;
+		completed_blocks = vd_to_axi_desc(vdesc)->completed_blocks;
+		len = vd_to_axi_desc(vdesc)->hw_desc[0].len;
+		completed_length = completed_blocks * len;
+		bytes = length - completed_length;
+	} else {
+		bytes = vd_to_axi_desc(vdesc)->length;
+	}
+
+	spin_unlock_irqrestore(&chan->vc.lock, flags);
+	dma_set_residue(txstate, bytes);
+
+	return status;
 }
 
 static void write_desc_llp(struct axi_dma_hw_desc *desc, dma_addr_t adr)
@@ -549,6 +571,7 @@ static int dw_axi_dma_set_hw_desc(struct axi_dma_chan *chan,
 
 	set_desc_src_master(hw_desc);
 
+	hw_desc->len = len;
 	return 0;
 }
 
@@ -575,6 +598,7 @@ dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
 	chan->direction = direction;
 	desc->chan = chan;
 	chan->cyclic = true;
+	desc->length = 0;
 
 	for (i = 0; i < num_periods; i++) {
 		hw_desc = &desc->hw_desc[i];
@@ -584,6 +608,7 @@ dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
 		if (status < 0)
 			goto err_desc_get;
 
+		desc->length += hw_desc->len;
 		/* Set end-of-link to the linked descriptor, so that cyclic
 		 * callback function can be triggered during interrupt.
 		 */
@@ -639,6 +664,7 @@ dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 		goto err_desc_get;
 
 	desc->chan = chan;
+	desc->length = 0;
 
 	for_each_sg(sgl, sg, sg_len, i) {
 		mem = sg_dma_address(sg);
@@ -648,6 +674,7 @@ dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 		status = dw_axi_dma_set_hw_desc(chan, hw_desc, mem, len);
 		if (status < 0)
 			goto err_desc_get;
+		desc->length += hw_desc->len;
 	}
 
 	if (unlikely(!desc))
@@ -696,6 +723,7 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 
 	desc->chan = chan;
 	num = 0;
+	desc->length = 0;
 	while (len) {
 		xfer_len = len;
 
@@ -748,7 +776,8 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 		set_desc_src_master(hw_desc);
 		set_desc_dest_master(hw_desc, desc);
 
-
+		hw_desc->len = xfer_len;
+		desc->length += hw_desc->len;
 		/* update the length and addresses for the next loop cycle */
 		len -= xfer_len;
 		dst_adr += xfer_len;
@@ -1216,7 +1245,7 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
 	dw->dma.directions = BIT(DMA_MEM_TO_MEM);
 	dw->dma.directions |= BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM);
-	dw->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+	dw->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 
 	dw->dma.dev = chip->dev;
 	dw->dma.device_tx_status = dma_chan_tx_status;
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +2 -0
index 651874e5c88f..bdb66d775125 100644
@@ -88,6 +88,7 @@ struct __packed axi_dma_lli {
 struct axi_dma_hw_desc {
 	struct axi_dma_lli	*lli;
 	dma_addr_t		llp;
+	u32			len;
 };
 
 struct axi_dma_desc {
@@ -96,6 +97,7 @@ struct axi_dma_desc {
 	struct virt_dma_desc		vd;
 	struct axi_dma_chan		*chan;
 	u32				completed_blocks;
+	u32				length;
 };
 
 static inline struct device *dchan2dev(struct dma_chan *dchan)
Signature · 1 line
2.18.0
#10 lore raw

PATCH v3 10/15 dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA

In reply to Sia Jee Heng

Add support for Intel KeemBay AxiDMA to the dw-axi-dmac Schemas DT binding.

---
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +25 -0
index 481ef0dacf5f..18e9422095bb 100644
@@ -8,6 +8,7 @@ title: Synopsys DesignWare AXI DMA Controller
 
 maintainers:
   - Eugeniy Paltsev <[email protected]
+  - Jee Heng Sia <[email protected]>
 
 description: |
  Synopsys DesignWare AXI DMA Controller DT Binding
@@ -16,6 +17,7 @@ properties:
   compatible:
     enum:
       - snps,axi-dma-1.01a
+      - intel,kmb-axi-dma
 
   reg:
     items:
@@ -24,6 +26,7 @@ properties:
   reg-names:
     items:
       - const: axidma_ctrl_regs
+      - const: axidma_apb_regs
 
   interrupts:
     maxItems: 1
@@ -124,3 +127,25 @@ examples:
          snps,priority = <0 1 2 3>;
          snps,axi-max-burst-len = <16>;
      };
+
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     /* example with intel,kmb-axi-dma */
+     #define KEEM_BAY_PSS_AXI_DMA
+     #define KEEM_BAY_PSS_APB_AXI_DMA
+     axi_dma: dma@28000000 {
+         compatible = "intel,kmb-axi-dma";
+         reg = <0x28000000 0x1000 0x20250000 0x24>;
+         reg-names = "axidma_ctrl_regs", "axidma_apb_regs";
+         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+         clock-names = "core-clk", "cfgr-clk";
+         clocks = <&scmi_clk KEEM_BAY_PSS_AXI_DMA>, <&scmi_clk KEEM_BAY_PSS_APB_AXI_DMA>;
+         #dma-cells = <1>;
+         dma-channels = <8>;
+         snps,dma-masters = <1>;
+         snps,data-width = <4>;
+         snps,priority = <0 0 0 0 0 0 0 0>;
+         snps,block-size = <1024 1024 1024 1024 1024 1024 1024 1024>;
+         snps,axi-max-burst-len = <16>;
+     };
Signature · 1 line
2.18.0
maintainer
#11 lore raw

Re: [PATCH v3 10/15] dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA

Quoted 8 lines · Sia Jee Heng

Add support for Intel KeemBay AxiDMA to the dw-axi-dmac Schemas DT binding.

---
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.example.dt.yaml: example-1: dma@28000000:reg:0: [671088640, 4096, 539295744, 36] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

See https://patchwork.ozlabs.org/patch/1398782

The base for the patch is generally the last rc1. Any dependencies should be noted.

If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:

pip3 install dtschema --upgrade

Please check and re-submit.

maintainer
#12 lore raw

Re: [PATCH v3 10/15] dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA

In reply to Sia Jee Heng
Quoted 29 lines · Sia Jee Heng

Add support for Intel KeemBay AxiDMA to the dw-axi-dmac Schemas DT binding.

---
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +2 -0
index 481ef0dacf5f..18e9422095bb 100644
@@ -8,6 +8,7 @@ title: Synopsys DesignWare AXI DMA Controller
 
 maintainers:
   - Eugeniy Paltsev <[email protected]
+  - Jee Heng Sia <[email protected]>
 
 description: |
  Synopsys DesignWare AXI DMA Controller DT Binding
@@ -16,6 +17,7 @@ properties:
   compatible:
     enum:
       - snps,axi-dma-1.01a
+      - intel,kmb-axi-dma
 
   reg:
     items:

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml properties: · line 29

Quoted 4 lines
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +1 -0
@@ -24,6 +26,7 @@ properties:
   reg-names:
     items:
       - const: axidma_ctrl_regs
+      - const: axidma_apb_regs

You need 'minItems: 1' here or everyone has to have 2 entries.

Also, doesn't 'reg' need updating?

Quoted 7 lines
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +0 -0
   interrupts:
     maxItems: 1
@@ -124,3 +127,25 @@ examples:
          snps,priority = <0 1 2 3>;
          snps,axi-max-burst-len = <16>;
      };

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml examples: · line 139

Quoted 10 lines
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +10 -0
+
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     /* example with intel,kmb-axi-dma */
+     #define KEEM_BAY_PSS_AXI_DMA
+     #define KEEM_BAY_PSS_APB_AXI_DMA
+     axi_dma: dma@28000000 {
+         compatible = "intel,kmb-axi-dma";
+         reg = <0x28000000 0x1000 0x20250000 0x24>;

reg = <0x28000000 0x1000>, <0x20250000 0x24>;

Quoted 15 lines
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +12 -0
+         reg-names = "axidma_ctrl_regs", "axidma_apb_regs";
+         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+         clock-names = "core-clk", "cfgr-clk";
+         clocks = <&scmi_clk KEEM_BAY_PSS_AXI_DMA>, <&scmi_clk KEEM_BAY_PSS_APB_AXI_DMA>;
+         #dma-cells = <1>;
+         dma-channels = <8>;
+         snps,dma-masters = <1>;
+         snps,data-width = <4>;
+         snps,priority = <0 0 0 0 0 0 0 0>;
+         snps,block-size = <1024 1024 1024 1024 1024 1024 1024 1024>;
+         snps,axi-max-burst-len = <16>;
+     };
Signature · 1 line
2.18.0
#13 lore raw

RE: [PATCH v3 10/15] dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA

Quoted 64 lines

-----Original Message-----
From: Rob Herring <[email protected]>
Sent: 12 November 2020 10:58 PM
To: Sia, Jee Heng <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; linux- [email protected]; [email protected]
Subject: Re: [PATCH v3 10/15] dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA

Quoted 31 lines · Sia Jee Heng

Add support for Intel KeemBay AxiDMA to the dw-axi-dmac Schemas DT binding.

---
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml index 481ef0dacf5f..18e9422095bb 100644

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +1 -0
@@ -8,6 +8,7 @@ title: Synopsys DesignWare AXI DMA Controller
 
 maintainers:
   - Eugeniy Paltsev <[email protected]
+  - Jee Heng Sia <[email protected]>
 
 description: |
  Synopsys DesignWare AXI DMA Controller DT Binding @@ -16,6 +17,7 @@

properties:
compatible:
enum:
- snps,axi-dma-1.01a

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +1 -0
+      - intel,kmb-axi-dma
 
   reg:
     items:

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml properties: · line 29

Quoted 4 lines
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +1 -0
@@ -24,6 +26,7 @@ properties:
   reg-names:
     items:
       - const: axidma_ctrl_regs
+      - const: axidma_apb_regs

You need 'minItems: 1' here or everyone has to have 2 entries.

Also, doesn't 'reg' need updating?

Quoted 11 lines
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +4 -0
   interrupts:
     maxItems: 1
@@ -124,3 +127,25 @@ examples:
          snps,priority = <0 1 2 3>;
          snps,axi-max-burst-len = <16>;
      };
+
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
Quoted 8 lines

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml examples: · line 139

Quoted 6 lines
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +6 -0
+     /* example with intel,kmb-axi-dma */
+     #define KEEM_BAY_PSS_AXI_DMA
+     #define KEEM_BAY_PSS_APB_AXI_DMA
+     axi_dma: dma@28000000 {
+         compatible = "intel,kmb-axi-dma";
+         reg = <0x28000000 0x1000 0x20250000 0x24>;

reg = <0x28000000 0x1000>, <0x20250000 0x24>;

[>>] Thanks Rob for the invaluable comments. Will update the changes in v4.

Quoted 17 lines

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml examples:

Quoted 5 lines
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +4 -0
+         reg-names = "axidma_ctrl_regs", "axidma_apb_regs";
+         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+         clock-names = "core-clk", "cfgr-clk";
+         clocks = <&scmi_clk KEEM_BAY_PSS_AXI_DMA>, <&scmi_clk

KEEM_BAY_PSS_APB_AXI_DMA>;

Quoted 11 lines
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +8 -1
+         #dma-cells = <1>;
+         dma-channels = <8>;
+         snps,dma-masters = <1>;
+         snps,data-width = <4>;
+         snps,priority = <0 0 0 0 0 0 0 0>;
+         snps,block-size = <1024 1024 1024 1024 1024 1024 1024 1024>;
+         snps,axi-max-burst-len = <16>;
+     };
--

2.18.0

#14 lore raw

PATCH v3 11/15 dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields

In reply to Sia Jee Heng

Add support for Intel KeemBay DMA registers. These registers are required to run data transfer between device to memory and memory to device on Intel KeemBay SoC.

---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c |  4 ++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h          | 14 ++++++++++++++
 2 files changed, 18 insertions(+)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +4 -0
index d82583e28a99..38786b5157e2 100644
@@ -1198,6 +1198,10 @@ static int dw_probe(struct platform_device *pdev)
 	if (IS_ERR(chip->regs))
 		return PTR_ERR(chip->regs);
 
+	chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(chip->apb_regs))
+		dev_warn(&pdev->dev, "apb_regs not supported\n");
+
 	chip->core_clk = devm_clk_get(chip->dev, "core-clk");
 	if (IS_ERR(chip->core_clk))
 		return PTR_ERR(chip->core_clk);
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +14 -0
index bdb66d775125..f64e8d33b127 100644
@@ -63,6 +63,7 @@ struct axi_dma_chip {
 	struct device		*dev;
 	int			irq;
 	void __iomem		*regs;
+	void __iomem		*apb_regs;
 	struct clk		*core_clk;
 	struct clk		*cfgr_clk;
 	struct dw_axi_dma	*dw;
@@ -169,6 +170,19 @@ static inline struct axi_dma_chan *dchan_to_axi_dma_chan(struct dma_chan *dchan)
 #define CH_INTSIGNAL_ENA	0x090 /* R/W Chan Interrupt Signal Enable */
 #define CH_INTCLEAR		0x098 /* W Chan Interrupt Clear */
 
+/* Apb slave registers */
+#define DMAC_APB_CFG		0x000 /* DMAC Apb Configuration Register */
+#define DMAC_APB_STAT		0x004 /* DMAC Apb Status Register */
+#define DMAC_APB_DEBUG_STAT_0	0x008 /* DMAC Apb Debug Status Register 0 */
+#define DMAC_APB_DEBUG_STAT_1	0x00C /* DMAC Apb Debug Status Register 1 */
+#define DMAC_APB_HW_HS_SEL_0	0x010 /* DMAC Apb HW HS register 0 */
+#define DMAC_APB_HW_HS_SEL_1	0x014 /* DMAC Apb HW HS register 1 */
+#define DMAC_APB_LPI		0x018 /* DMAC Apb Low Power Interface Reg */
+#define DMAC_APB_BYTE_WR_CH_EN	0x01C /* DMAC Apb Byte Write Enable */
+#define DMAC_APB_HALFWORD_WR_CH_EN	0x020 /* DMAC Halfword write enables */
+
+#define UNUSED_CHANNEL		0x3F /* Set unused DMA channel to 0x3F */
+#define MAX_BLOCK_SIZE		0x1000 /* 1024 blocks * 4 bytes data width */
 
 /* DMAC_CFG */
 #define DMAC_EN_POS			0
Signature · 1 line
2.18.0
#15 lore raw

PATCH v3 12/15 dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support

In reply to Sia Jee Heng

Add support for Intel KeemBay AxiDMA to the .compatible field.

---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 1 +
 1 file changed, 1 insertion(+)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +1 -0
index 38786b5157e2..daea1fb43bef 100644
@@ -1346,6 +1346,7 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = {
 
 static const struct of_device_id dw_dma_of_id_table[] = {
 	{ .compatible = "snps,axi-dma-1.01a" },
+	{ .compatible = "intel,kmb-axi-dma" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
Signature · 1 line
2.18.0
#16 lore raw

PATCH v3 13/15 dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake

In reply to Sia Jee Heng

Add support for Intel KeemBay AxiDMA device handshake programming. Device handshake number passed in to the AxiDMA shall be written to the Intel KeemBay AxiDMA hardware handshake registers before DMA operations are started.

---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +52 -0
index daea1fb43bef..df85f8289f05 100644
@@ -445,6 +445,48 @@ static void dma_chan_free_chan_resources(struct dma_chan *dchan)
 	pm_runtime_put(chan->chip->dev);
 }
 
+static int dw_axi_dma_set_hw_channel(struct axi_dma_chip *chip, u32 hs_number,
+				     bool set)
+{
+	unsigned long start = 0;
+	unsigned long reg_value;
+	unsigned long reg_mask;
+	unsigned long reg_set;
+	unsigned long mask;
+	unsigned long val;
+
+	if (!chip->apb_regs)
+		return -ENODEV;
+
+	/*
+	 * An unused DMA channel has a default value of 0x3F.
+	 * Lock the DMA channel by assign a handshake number to the channel.
+	 * Unlock the DMA channel by assign 0x3F to the channel.
+	 */
+	if (set) {
+		reg_set = UNUSED_CHANNEL;
+		val = hs_number;
+	} else {
+		reg_set = hs_number;
+		val = UNUSED_CHANNEL;
+	}
+
+	reg_value = lo_hi_readq(chip->apb_regs + DMAC_APB_HW_HS_SEL_0);
+
+	for_each_set_clump8(start, reg_mask, &reg_value, 64) {
+		if (reg_mask == reg_set) {
+			mask = GENMASK_ULL(start + 7, start);
+			reg_value &= ~mask;
+			reg_value |= rol64(val, start);
+			lo_hi_writeq(reg_value,
+				     chip->apb_regs + DMAC_APB_HW_HS_SEL_0);
+			break;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * If DW_axi_dmac sees CHx_CTL.ShadowReg_Or_LLI_Last bit of the fetched LLI
  * as 1, it understands that the current block is the final block in the
@@ -629,6 +671,9 @@ dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
 		llp = hw_desc->llp;
 	} while (num_periods);
 
+	if (dw_axi_dma_set_hw_channel(chan->chip, chan->hw_hs_num, true))
+		goto err_desc_get;
+
 	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
 
 err_desc_get:
@@ -690,6 +735,9 @@ dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 		llp = hw_desc->llp;
 	} while (sg_len);
 
+	if (dw_axi_dma_set_hw_channel(chan->chip, chan->hw_hs_num, true))
+		goto err_desc_get;
+
 	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
 
 err_desc_get:
@@ -965,6 +1013,10 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
 		dev_warn(dchan2dev(dchan),
 			 "%s failed to stop\n", axi_chan_name(chan));
 
+	if (chan->direction != DMA_MEM_TO_MEM)
+		dw_axi_dma_set_hw_channel(chan->chip,
+					  chan->hw_hs_num, false);
+
 	spin_lock_irqsave(&chan->vc.lock, flags);
 
 	vchan_get_all_descriptors(&chan->vc, &head);
Signature · 1 line
2.18.0
#17 lore raw

PATCH v3 14/15 dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers

In reply to Sia Jee Heng

Add support for Intel KeemBay AxiDMA BYTE and HALFWORD registers programming.

Intel KeemBay AxiDMA supports data transfer between device to memory and memory to device operations.

This code is needed by I2C, I3C, I2S, SPI and UART which uses FIFO size of 8bits and 16bits to perform memory to device data transfer operation. 0-padding functionality is provided to avoid pre-processing of data on CPU.

---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 44 ++++++++++++++++---
 1 file changed, 39 insertions(+), 5 deletions(-)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +39 -5
index df85f8289f05..812f51c717e6 100644
@@ -312,7 +312,7 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
 				      struct axi_dma_desc *first)
 {
 	u32 priority = chan->chip->dw->hdata->priority[chan->id];
-	u32 reg, irq_mask;
+	u32 reg, irq_mask, reg_width, offset, val;
 	u8 lms = 0; /* Select AXI0 master for LLI fetching */
 
 	if (unlikely(axi_chan_is_hw_enable(chan))) {
@@ -334,6 +334,25 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
 	       DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_SRC_POS);
 	switch (chan->direction) {
 	case DMA_MEM_TO_DEV:
+		if (chan->chip->apb_regs) {
+			reg_width = __ffs(chan->config.dst_addr_width);
+			/*
+			 * Configure Byte and Halfword register
+			 * for MEM_TO_DEV only.
+			 */
+			if (reg_width == DWAXIDMAC_TRANS_WIDTH_16) {
+				offset = DMAC_APB_HALFWORD_WR_CH_EN;
+				val = ioread32(chan->chip->apb_regs + offset);
+				val |= BIT(chan->id);
+				iowrite32(val, chan->chip->apb_regs + offset);
+			} else if (reg_width == DWAXIDMAC_TRANS_WIDTH_8) {
+				offset = DMAC_APB_BYTE_WR_CH_EN;
+				val = ioread32(chan->chip->apb_regs + offset);
+				val |= BIT(chan->id);
+				iowrite32(val, chan->chip->apb_regs + offset);
+			}
+		}
+
 		reg |= (chan->config.device_fc ?
 			DWAXIDMAC_TT_FC_MEM_TO_PER_DST :
 			DWAXIDMAC_TT_FC_MEM_TO_PER_DMAC)
@@ -1000,8 +1019,9 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
 {
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
 	u32 chan_active = BIT(chan->id) << DMAC_CHAN_EN_SHIFT;
+	u32 reg_width = __ffs(chan->config.dst_addr_width);
 	unsigned long flags;
-	u32 val;
+	u32 offset, val;
 	int ret;
 	LIST_HEAD(head);
 
@@ -1013,9 +1033,23 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
 		dev_warn(dchan2dev(dchan),
 			 "%s failed to stop\n", axi_chan_name(chan));
 
-	if (chan->direction != DMA_MEM_TO_MEM)
-		dw_axi_dma_set_hw_channel(chan->chip,
-					  chan->hw_hs_num, false);
+	if (chan->direction != DMA_MEM_TO_MEM) {
+		ret = dw_axi_dma_set_hw_channel(chan->chip,
+						chan->hw_hs_num, false);
+		if (ret == 0 && chan->direction == DMA_MEM_TO_DEV) {
+			if (reg_width == DWAXIDMAC_TRANS_WIDTH_8) {
+				offset = DMAC_APB_BYTE_WR_CH_EN;
+				val = ioread32(chan->chip->apb_regs + offset);
+				val &= ~BIT(chan->id);
+				iowrite32(val, chan->chip->apb_regs + offset);
+			} else if (reg_width == DWAXIDMAC_TRANS_WIDTH_16) {
+				offset = DMAC_APB_HALFWORD_WR_CH_EN;
+				val = ioread32(chan->chip->apb_regs + offset);
+				val &= ~BIT(chan->id);
+				iowrite32(val, chan->chip->apb_regs + offset);
+			}
+		}
+	}
 
 	spin_lock_irqsave(&chan->vc.lock, flags);
 
Signature · 1 line
2.18.0
#18 lore raw

PATCH v3 15/15 dmaengine: dw-axi-dmac: Set constraint to the Max segment size

In reply to Sia Jee Heng

Add support for DMA Scatter-Gather (SG) constraint so that DMA clients can handle the AxiDMA limitation.

Without supporting DMA constraint the default Max segment size reported by dmaengine is 64KB, which is not supported by Intel KeemBay AxiDMA.

---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 8 ++++++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h          | 1 +
 2 files changed, 9 insertions(+)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +8 -0
index 812f51c717e6..7e00d9df4d4d 100644
@@ -12,6 +12,7 @@
 #include <linux/device.h>
 #include <linux/dmaengine.h>
 #include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -1353,6 +1354,13 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.device_prep_slave_sg = dw_axi_dma_chan_prep_slave_sg;
 	dw->dma.device_prep_dma_cyclic = dw_axi_dma_chan_prep_cyclic;
 
+	/*
+	 * Synopsis DesignWare AxiDMA datasheet mentioned Maximum
+	 * supported blocks is 1024. Device register width is 4 bytes.
+	 * Therefore, set constraint to 1024 * 4.
+	 */
+	dw->dma.dev->dma_parms = &dw->dma_parms;
+	dma_set_max_seg_size(&pdev->dev, MAX_BLOCK_SIZE);
 	platform_set_drvdata(pdev, chip);
 
 	pm_runtime_enable(chip->dev);
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +1 -0
index f64e8d33b127..67669049cead 100644
@@ -54,6 +54,7 @@ struct axi_dma_chan {
 struct dw_axi_dma {
 	struct dma_device	dma;
 	struct dw_axi_dma_hcfg	*hdata;
+	struct device_dma_parameters	dma_parms;
 
 	/* channels */
 	struct axi_dma_chan	*chan;
Signature · 1 line
2.18.0