Skip to contentSkip to conversation

ARM: tegra: nexus7: Set video decoder clock rate to 408MHz

PATCH New Dmitry Osipenko 1 participant 1 message Nov 12, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ARM: tegra: nexus7: Set video decoder clock rate to 408MHz

The default 600MHz is technically unsupported on Nexus 7. Assign VDE clock to 408MHz, which is supported by all hardware versions.

---

Changelog:

v3: - Rebased patch properly, fixed merge conflict.

 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +6 -0
index 8def1d2e34f9..b284e32debca 100644
@@ -90,6 +90,12 @@ init-low-power-mode-hog {
 		};
 	};
 
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
Signature · 1 line
2.29.2