ARM: tegra: nexus7: Set video decoder clock rate to 408MHz
Subsystems (2)
PATCH v3 1/1 ARM: tegra: nexus7: Set video decoder clock rate to 408MHz
The default 600MHz is technically unsupported on Nexus 7. Assign VDE clock to 408MHz, which is supported by all hardware versions.
Signed-off-by Dmitry Osipenko <[email protected]>
---
Changelog:
v3: - Rebased patch properly, fixed merge conflict.
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +6 -0
@@ -90,6 +90,12 @@ init-low-power-mode-hog { }; }; + vde@6001a000 { + assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>; + assigned-clock-rates = <408000000>; + }; + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>;
Signature · 1 line
2.29.2