Skip to contentSkip to conversation

netdevsim: add ethtool coalesce and ring settings

PATCH Superseded Antonio Cardace 3 participants 11 messages Nov 17, 2020 – Nov 18, 2020

Subsystems (6)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover netdevsim: add ethtool coalesce and ring settings

Output of ethtool-ring.sh and ethtool-coalesce.sh selftests:

# ./ethtool-ring.sh
PASSED all 4 checks
# ./ethtool-coalesce.sh
PASSED all 22 checks

Antonio Cardace (6):
ethtool: add ETHTOOL_COALESCE_ALL_PARAMS define
netdevsim: move ethtool pause params in separate struct
netdevsim: support ethtool ring and coalesce settings
selftests: extract common functions in ethtool-common.sh
selftests: refactor get_netdev_name function
selftests: add ring and coalesce selftests

 drivers/net/netdevsim/ethtool.c               |  82 +++++++++--
 drivers/net/netdevsim/netdevsim.h             |   9 +-
 include/linux/ethtool.h                       |   1 +
 .../drivers/net/netdevsim/ethtool-coalesce.sh | 132 ++++++++++++++++++
 .../drivers/net/netdevsim/ethtool-common.sh   |  53 +++++++
 .../drivers/net/netdevsim/ethtool-pause.sh    |  63 +--------
 .../drivers/net/netdevsim/ethtool-ring.sh     |  85 +++++++++++
 7 files changed, 352 insertions(+), 73 deletions(-)
 create mode 100755 tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh
 create mode 100644 tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh
 create mode 100755 tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh

--
2.28.0

#1 lore raw

PATCH v4 1/6 ethtool: add ETHTOOL_COALESCE_ALL_PARAMS define

This bitmask represents all existing coalesce parameters.

---
 include/linux/ethtool.h | 1 +
 1 file changed, 1 insertion(+)
include/linux/ethtool.h +1 -0
index 6408b446051f..e3da25b51ae4 100644
@@ -215,6 +215,7 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
 #define ETHTOOL_COALESCE_TX_USECS_HIGH		BIT(19)
 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH	BIT(20)
 #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL	BIT(21)
+#define ETHTOOL_COALESCE_ALL_PARAMS		GENMASK(21, 0)
 
 #define ETHTOOL_COALESCE_USECS						\
 	(ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
Signature · 1 line
2.28.0
#2 lore raw

PATCH v4 2/6 netdevsim: move ethtool pause params in separate struct

In reply to Antonio Cardace

This will help the refactoring in the next commit
when coalesce and ring settings are added.

---
 drivers/net/netdevsim/ethtool.c   | 14 +++++++-------
 drivers/net/netdevsim/netdevsim.h |  6 +++++-
 2 files changed, 12 insertions(+), 8 deletions(-)
drivers/net/netdevsim/ethtool.c +7 -7
index f1884d90a876..a1500f849203 100644
@@ -13,9 +13,9 @@ nsim_get_pause_stats(struct net_device *dev,
 {
 	struct netdevsim *ns = netdev_priv(dev);
 
-	if (ns->ethtool.report_stats_rx)
+	if (ns->ethtool.pauseparam.report_stats_rx)
 		pause_stats->rx_pause_frames = 1;
-	if (ns->ethtool.report_stats_tx)
+	if (ns->ethtool.pauseparam.report_stats_tx)
 		pause_stats->tx_pause_frames = 2;
 }
 
@@ -25,8 +25,8 @@ nsim_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause)
 	struct netdevsim *ns = netdev_priv(dev);
 
 	pause->autoneg = 0; /* We don't support ksettings, so can't pretend */
-	pause->rx_pause = ns->ethtool.rx;
-	pause->tx_pause = ns->ethtool.tx;
+	pause->rx_pause = ns->ethtool.pauseparam.rx;
+	pause->tx_pause = ns->ethtool.pauseparam.tx;
 }
 
 static int
@@ -37,8 +37,8 @@ nsim_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause)
 	if (pause->autoneg)
 		return -EINVAL;
 
-	ns->ethtool.rx = pause->rx_pause;
-	ns->ethtool.tx = pause->tx_pause;
+	ns->ethtool.pauseparam.rx = pause->rx_pause;
+	ns->ethtool.pauseparam.tx = pause->tx_pause;
 	return 0;
 }
 
@@ -58,7 +58,7 @@ void nsim_ethtool_init(struct netdevsim *ns)
 
 	dir = debugfs_create_dir("pause", ethtool);
 	debugfs_create_bool("report_stats_rx", 0600, dir,
-			    &ns->ethtool.report_stats_rx);
+			    &ns->ethtool.pauseparam.report_stats_rx);
 	debugfs_create_bool("report_stats_tx", 0600, dir,
 			    &ns->ethtool.report_stats_tx);
 }
drivers/net/netdevsim/netdevsim.h +5 -1
index 827fc80f50a0..4b3023e49094 100644
@@ -51,13 +51,17 @@ struct nsim_ipsec {
 	u32 ok;
 };
 
-struct nsim_ethtool {
+struct nsim_ethtool_pauseparam {
 	bool rx;
 	bool tx;
 	bool report_stats_rx;
 	bool report_stats_tx;
 };
 
+struct nsim_ethtool {
+	struct nsim_ethtool_pauseparam pauseparam;
+};
+
 struct netdevsim {
 	struct net_device *netdev;
 	struct nsim_dev *nsim_dev;
Signature · 1 line
2.28.0
#3 lore raw

PATCH v4 3/6 netdevsim: support ethtool ring and coalesce settings

In reply to Antonio Cardace

Add ethtool ring and coalesce settings support for testing.

---
v3 -> v4:
- move supported_coalesce_params struct field as first field
- extracted pauseparam refactoring in a different patch

---
 drivers/net/netdevsim/ethtool.c   | 68 +++++++++++++++++++++++++++++--
 drivers/net/netdevsim/netdevsim.h |  3 ++
 2 files changed, 67 insertions(+), 4 deletions(-)
drivers/net/netdevsim/ethtool.c +64 -4
index a1500f849203..166f0d6cbcf7 100644
@@ -42,23 +42,83 @@ nsim_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause)
 	return 0;
 }
 
+static int nsim_get_coalesce(struct net_device *dev,
+			     struct ethtool_coalesce *coal)
+{
+	struct netdevsim *ns = netdev_priv(dev);
+
+	memcpy(coal, &ns->ethtool.coalesce, sizeof(ns->ethtool.coalesce));
+	return 0;
+}
+
+static int nsim_set_coalesce(struct net_device *dev,
+			     struct ethtool_coalesce *coal)
+{
+	struct netdevsim *ns = netdev_priv(dev);
+
+	memcpy(&ns->ethtool.coalesce, coal, sizeof(ns->ethtool.coalesce));
+	return 0;
+}
+
+static void nsim_get_ringparam(struct net_device *dev,
+			       struct ethtool_ringparam *ring)
+{
+	struct netdevsim *ns = netdev_priv(dev);
+
+	memcpy(ring, &ns->ethtool.ring, sizeof(ns->ethtool.ring));
+}
+
+static int nsim_set_ringparam(struct net_device *dev,
+			      struct ethtool_ringparam *ring)
+{
+	struct netdevsim *ns = netdev_priv(dev);
+
+	memcpy(&ns->ethtool.ring, ring, sizeof(ns->ethtool.ring));
+	return 0;
+}
+
 static const struct ethtool_ops nsim_ethtool_ops = {
-	.get_pause_stats	= nsim_get_pause_stats,
-	.get_pauseparam		= nsim_get_pauseparam,
-	.set_pauseparam		= nsim_set_pauseparam,
+	.supported_coalesce_params	= ETHTOOL_COALESCE_ALL_PARAMS,
+	.get_pause_stats	        = nsim_get_pause_stats,
+	.get_pauseparam		        = nsim_get_pauseparam,
+	.set_pauseparam		        = nsim_set_pauseparam,
+	.set_coalesce			= nsim_set_coalesce,
+	.get_coalesce			= nsim_get_coalesce,
+	.get_ringparam			= nsim_get_ringparam,
+	.set_ringparam			= nsim_set_ringparam,
 };
 
+static void nsim_ethtool_ring_init(struct netdevsim *ns)
+{
+	ns->ethtool.ring.rx_max_pending = 4096;
+	ns->ethtool.ring.rx_jumbo_max_pending = 4096;
+	ns->ethtool.ring.rx_mini_max_pending = 4096;
+	ns->ethtool.ring.tx_max_pending = 4096;
+}
+
 void nsim_ethtool_init(struct netdevsim *ns)
 {
 	struct dentry *ethtool, *dir;
 
 	ns->netdev->ethtool_ops = &nsim_ethtool_ops;
 
+	nsim_ethtool_ring_init(ns);
+
 	ethtool = debugfs_create_dir("ethtool", ns->nsim_dev_port->ddir);
 
 	dir = debugfs_create_dir("pause", ethtool);
 	debugfs_create_bool("report_stats_rx", 0600, dir,
 			    &ns->ethtool.pauseparam.report_stats_rx);
 	debugfs_create_bool("report_stats_tx", 0600, dir,
-			    &ns->ethtool.report_stats_tx);
+			    &ns->ethtool.pauseparam.report_stats_tx);
+
+	dir = debugfs_create_dir("ring", ethtool);
+	debugfs_create_u32("rx_max_pending", 0600, dir,
+			   &ns->ethtool.ring.rx_max_pending);
+	debugfs_create_u32("rx_jumbo_max_pending", 0600, dir,
+			   &ns->ethtool.ring.rx_jumbo_max_pending);
+	debugfs_create_u32("rx_mini_max_pending", 0600, dir,
+			   &ns->ethtool.ring.rx_mini_max_pending);
+	debugfs_create_u32("tx_max_pending", 0600, dir,
+			   &ns->ethtool.ring.tx_max_pending);
 }
drivers/net/netdevsim/netdevsim.h +3 -0
index 4b3023e49094..b023dc0a4259 100644
@@ -15,6 +15,7 @@
 
 #include <linux/debugfs.h>
 #include <linux/device.h>
+#include <linux/ethtool.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/netdevice.h>
@@ -60,6 +61,8 @@ struct nsim_ethtool_pauseparam {
 
 struct nsim_ethtool {
 	struct nsim_ethtool_pauseparam pauseparam;
+	struct ethtool_coalesce coalesce;
+	struct ethtool_ringparam ring;
 };
 
 struct netdevsim {

--
2.28.0

#4 lore raw

PATCH v4 4/6 selftests: extract common functions in ethtool-common.sh

In reply to Antonio Cardace

Factor out some useful functions so that they can be reused by other ethtool-netdevsim scripts.

---
 .../drivers/net/netdevsim/ethtool-common.sh   | 69 +++++++++++++++++++
 .../drivers/net/netdevsim/ethtool-pause.sh    | 63 +----------------
 2 files changed, 71 insertions(+), 61 deletions(-)
 create mode 100644 tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh
tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh new file +69 -0
new file mode 100644
index 000000000000..fa44cf6e732c
@@ -0,0 +1,69 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+NSIM_ID=$((RANDOM % 1024))
+NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID
+NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID/ports/0
+NSIM_NETDEV=
+num_passes=0
+num_errors=0
+
+function cleanup_nsim {
+    if [ -e $NSIM_DEV_SYS ]; then
+	echo $NSIM_ID > /sys/bus/netdevsim/del_device
+    fi
+}
+
+function cleanup {
+    cleanup_nsim
+}
+
+trap cleanup EXIT
+
+function get_netdev_name {
+    local -n old=$1
+
+    new=$(ls /sys/class/net)
+
+    for netdev in $new; do
+	for check in $old; do
+            [ $netdev == $check ] && break
+	done
+
+	if [ $netdev != $check ]; then
+	    echo $netdev
+	    break
+	fi
+    done
+}
+
+function check {
+    local code=$1
+    local str=$2
+    local exp_str=$3
+
+    if [ $code -ne 0 ]; then
+	((num_errors++))
+	return
+    fi
+
+    if [ "$str" != "$exp_str"  ]; then
+	echo -e "Expected: '$exp_str', got '$str'"
+	((num_errors++))
+	return
+    fi
+
+    ((num_passes++))
+}
+
+function make_netdev {
+    # Make a netdevsim
+    old_netdevs=$(ls /sys/class/net)
+
+    if ! $(lsmod | grep -q netdevsim); then
+	modprobe netdevsim
+    fi
+
+    echo $NSIM_ID > /sys/bus/netdevsim/new_device
+    echo `get_netdev_name old_netdevs`
+}
tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh +2 -61

75 lines not on this page · raw message

Signature · 1 line
2.28.0
#5 lore raw

PATCH v4 5/6 selftests: refactor get_netdev_name function

In reply to Antonio Cardace

As pointed out by Michal Kubecek, getting the name with the previous approach was racy, it's better and easier to get the name of the device with this patch's approach.

Essentialy the function doesn't need to exist anymore as it's a simple 'ls' command.

---
 .../drivers/net/netdevsim/ethtool-common.sh   | 20 ++-----------------
 1 file changed, 2 insertions(+), 18 deletions(-)
tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh +2 -18
index fa44cf6e732c..3c287ac78117 100644
@@ -20,23 +20,6 @@ function cleanup {
 
 trap cleanup EXIT
 
-function get_netdev_name {
-    local -n old=$1
-
-    new=$(ls /sys/class/net)
-
-    for netdev in $new; do
-	for check in $old; do
-            [ $netdev == $check ] && break
-	done
-
-	if [ $netdev != $check ]; then
-	    echo $netdev
-	    break
-	fi
-    done
-}
-
 function check {
     local code=$1
     local str=$2
@@ -65,5 +48,6 @@ function make_netdev {
     fi
 
     echo $NSIM_ID > /sys/bus/netdevsim/new_device
-    echo `get_netdev_name old_netdevs`
+    # get new device name
+    echo $(ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/)
 }
Signature · 1 line
2.28.0
#6 lore raw

Re: [PATCH net-next v4 5/6] selftests: refactor get_netdev_name function

Quoted 42 lines · Antonio Cardace

As pointed out by Michal Kubecek, getting the name with the previous approach was racy, it's better and easier to get the name of the device with this patch's approach.

Essentialy the function doesn't need to exist anymore as it's a simple 'ls' command.

---
 .../drivers/net/netdevsim/ethtool-common.sh   | 20 ++-----------------
 1 file changed, 2 insertions(+), 18 deletions(-)
tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh +0 -17
index fa44cf6e732c..3c287ac78117 100644
@@ -20,23 +20,6 @@ function cleanup {
 
 trap cleanup EXIT
 
-function get_netdev_name {
-    local -n old=$1
-
-    new=$(ls /sys/class/net)
-
-    for netdev in $new; do
-	for check in $old; do
-            [ $netdev == $check ] && break
-	done
-
-	if [ $netdev != $check ]; then
-	    echo $netdev
-	    break
-	fi
-    done
-}
-
 function check {
     local code=$1
     local str=$2

tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh function make_netdev { · line 52

Quoted 6 lines
tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh +2 -1
@@ -65,5 +48,6 @@ function make_netdev {
     fi
 
     echo $NSIM_ID > /sys/bus/netdevsim/new_device
-    echo `get_netdev_name old_netdevs`
+    # get new device name
+    echo $(ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/)

Is there a reason for combining command substitution with echo? Couldn't we use one of

  ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/
  echo /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/*

instead?

Michal

Quoted 4 lines
tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh +0 -0
 }
Signature · 1 line
2.28.0
#7 lore raw

Re: [PATCH net-next v4 5/6] selftests: refactor get_netdev_name function

Quoted 53 lines · Michal Kubecek
Quoted 42 lines · Antonio Cardace

As pointed out by Michal Kubecek, getting the name with the previous approach was racy, it's better and easier to get the name of the device with this patch's approach.

Essentialy the function doesn't need to exist anymore as it's a simple 'ls' command.

---
 .../drivers/net/netdevsim/ethtool-common.sh   | 20 ++-----------------
 1 file changed, 2 insertions(+), 18 deletions(-)
tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh +0 -17
index fa44cf6e732c..3c287ac78117 100644
@@ -20,23 +20,6 @@ function cleanup {
 
 trap cleanup EXIT
 
-function get_netdev_name {
-    local -n old=$1
-
-    new=$(ls /sys/class/net)
-
-    for netdev in $new; do
-	for check in $old; do
-            [ $netdev == $check ] && break
-	done
-
-	if [ $netdev != $check ]; then
-	    echo $netdev
-	    break
-	fi
-    done
-}
-
 function check {
     local code=$1
     local str=$2

tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh function make_netdev { · line 52

Quoted 6 lines
tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh +2 -1
@@ -65,5 +48,6 @@ function make_netdev {
     fi
 
     echo $NSIM_ID > /sys/bus/netdevsim/new_device
-    echo `get_netdev_name old_netdevs`
+    # get new device name
+    echo $(ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/)

Is there a reason for combining command substitution with echo? Couldn't we use one of

Quoted 7 lines
  ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/
  echo /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/*

instead?

Michal

Ouch, no that's just a mistake. I'll fix it.

Do I have to resend the whole serie as a new version or is there a quicker way to just resend a single patch?

Thanks,
Antonio

maintainer
#8 lore raw

Re: [PATCH net-next v4 5/6] selftests: refactor get_netdev_name function

Quoted 2 lines · On Wed, 18 Nov 2020 10:03:20 +0100 Antonio Cardace wrote:

Do I have to resend the whole serie as a new version or is there a quicker way to just resend a single patch?

Just repost the series as v5, it's the least confusing way. Changelog from version to version would be good. You can put it in the cover letter.

#9 lore raw

Re: [PATCH net-next v4 5/6] selftests: refactor get_netdev_name function

Quoted 8 lines · Jakub Kicinski
Quoted 2 lines · On Wed, 18 Nov 2020 10:03:20 +0100 Antonio Cardace wrote:

Do I have to resend the whole serie as a new version or is there a quicker way to just resend a single patch?

Just repost the series as v5, it's the least confusing way. Changelog from version to version would be good. You can put it in the cover letter.

Ok thanks, will do.

Antonio

#10 lore raw

PATCH v4 6/6 selftests: add ring and coalesce selftests

In reply to Antonio Cardace

Add scripts to test ring and coalesce settings
of netdevsim.

---
 .../drivers/net/netdevsim/ethtool-coalesce.sh | 132 ++++++++++++++++++
 .../drivers/net/netdevsim/ethtool-ring.sh     |  85 +++++++++++
 2 files changed, 217 insertions(+)
 create mode 100755 tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh
 create mode 100755 tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh
tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh new file +132 -0
new file mode 100755
index 000000000000..9adfba8f87e6
@@ -0,0 +1,132 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+source ethtool-common.sh
+
+function get_value {
+    local query="${SETTINGS_MAP[$1]}"
+
+    echo $(ethtool -c $NSIM_NETDEV | \
+        awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[ \t]/, "", $2); print $2}')
+}
+
+function update_current_settings {
+    for key in ${!SETTINGS_MAP[@]}; do
+        CURRENT_SETTINGS[$key]=$(get_value $key)
+    done
+    echo ${CURRENT_SETTINGS[@]}
+}
+
+if ! ethtool -h | grep -q coalesce; then
+    echo "SKIP: No --coalesce support in ethtool"
+    exit 4
+fi
+
+NSIM_NETDEV=$(make_netdev)
+
+set -o pipefail
+
+declare -A SETTINGS_MAP=(
+    ["rx-frames-low"]="rx-frame-low"
+    ["tx-frames-low"]="tx-frame-low"
+    ["rx-frames-high"]="rx-frame-high"
+    ["tx-frames-high"]="tx-frame-high"
+    ["rx-usecs"]="rx-usecs"
+    ["rx-frames"]="rx-frames"
+    ["rx-usecs-irq"]="rx-usecs-irq"
+    ["rx-frames-irq"]="rx-frames-irq"
+    ["tx-usecs"]="tx-usecs"
+    ["tx-frames"]="tx-frames"
+    ["tx-usecs-irq"]="tx-usecs-irq"
+    ["tx-frames-irq"]="tx-frames-irq"
+    ["stats-block-usecs"]="stats-block-usecs"
+    ["pkt-rate-low"]="pkt-rate-low"
+    ["rx-usecs-low"]="rx-usecs-low"
+    ["tx-usecs-low"]="tx-usecs-low"
+    ["pkt-rate-high"]="pkt-rate-high"
+    ["rx-usecs-high"]="rx-usecs-high"
+    ["tx-usecs-high"]="tx-usecs-high"
+    ["sample-interval"]="sample-interval"
+)
+
+declare -A CURRENT_SETTINGS=(
+    ["rx-frames-low"]=""
+    ["tx-frames-low"]=""
+    ["rx-frames-high"]=""
+    ["tx-frames-high"]=""
+    ["rx-usecs"]=""
+    ["rx-frames"]=""
+    ["rx-usecs-irq"]=""
+    ["rx-frames-irq"]=""
+    ["tx-usecs"]=""
+    ["tx-frames"]=""
+    ["tx-usecs-irq"]=""
+    ["tx-frames-irq"]=""
+    ["stats-block-usecs"]=""
+    ["pkt-rate-low"]=""
+    ["rx-usecs-low"]=""
+    ["tx-usecs-low"]=""
+    ["pkt-rate-high"]=""
+    ["rx-usecs-high"]=""
+    ["tx-usecs-high"]=""
+    ["sample-interval"]=""
+)
+
+declare -A EXPECTED_SETTINGS=(
+    ["rx-frames-low"]=""
+    ["tx-frames-low"]=""
+    ["rx-frames-high"]=""
+    ["tx-frames-high"]=""
+    ["rx-usecs"]=""
+    ["rx-frames"]=""
+    ["rx-usecs-irq"]=""
+    ["rx-frames-irq"]=""
+    ["tx-usecs"]=""
+    ["tx-frames"]=""
+    ["tx-usecs-irq"]=""
+    ["tx-frames-irq"]=""
+    ["stats-block-usecs"]=""
+    ["pkt-rate-low"]=""
+    ["rx-usecs-low"]=""
+    ["tx-usecs-low"]=""
+    ["pkt-rate-high"]=""
+    ["rx-usecs-high"]=""
+    ["tx-usecs-high"]=""
+    ["sample-interval"]=""
+)
+
+# populate the expected settings map
+for key in ${!SETTINGS_MAP[@]}; do
+    EXPECTED_SETTINGS[$key]=$(get_value $key)
+done
+
+# test
+for key in ${!SETTINGS_MAP[@]}; do
+    value=$((RANDOM % $((2**32-1))))
+
+    ethtool -C $NSIM_NETDEV "$key" "$value"
+
+    EXPECTED_SETTINGS[$key]="$value"
+    expected=${EXPECTED_SETTINGS[@]}
+    current=$(update_current_settings)
+
+    check $? "$current" "$expected"
+    set +x
+done
+
+# bool settings which ethtool displays on the same line
+ethtool -C $NSIM_NETDEV adaptive-rx on
+s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on  TX: off")
+check $? "$s" ""
+
+ethtool -C $NSIM_NETDEV adaptive-tx on
+s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on  TX: on")
+check $? "$s" ""
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $((num_passes)) checks"
+    exit 0
+else
+    echo "FAILED $num_errors/$((num_errors+num_passes)) checks"
+    exit 1
+fi
tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh new file +85 -0

85 lines not on this page · raw message

Signature · 1 line
2.28.0