lib8390: Remove custom padding solution
Subsystems (3)
v2 cover lib8390: Remove custom padding solution
When padding undersized frames, lib8390.c utilizes a stack scratch area plus memset/memcpy. In doing so, it is overwriting content already zeroed with memset, which seems not optimal even when commented as being more efficient. Using eth_skb_pad() allows us to remove memset/memcpy and the stack scratch area altogether.
v2 changes:
- split cleanup of variables in seperate patch
- revise commit description
Armin Wolf (2):
lib8390: Use eth_skb_pad()
lib8390: Cleanup variables
drivers/net/ethernet/8390/lib8390.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-)
--
2.20.1
PATCH v2 1/2 lib8390: Use eth_skb_pad()
According to Joe Perches, this bit seems less than optimal because it overwrites already zeroed content. But instead of fixing the custom padding solution, replace them entirely with generic eth_skb_pad().
--- drivers/net/ethernet/8390/lib8390.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/net/ethernet/8390/lib8390.c +9 -9
@@ -305,17 +305,17 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, {unsigned long e8390_base = dev->base_addr;struct ei_device *ei_local =netdev_priv (dev); -int send_length = skb->len, output_page; +int send_length, output_page;unsigned long flags; -char buf[ETH_ZLEN ]; -char *data = skb->data; - -if (skb->len <ETH_ZLEN ) { -memset (buf,0 ,ETH_ZLEN );/* more efficient than doing just the needed bits */ -memcpy (buf, data, skb->len); - send_length =ETH_ZLEN ; - data = buf; +char *data; + +/* The Hardware does not pad undersized frames */ +if (eth_skb_pad (skb)) { + dev->stats.tx_dropped++; +return NETDEV_TX_OK ; } + data = skb->data; + send_length = skb->len;/* Mask interrupts from the ethercard. SMP: We have to grab the lock here otherwise the IRQ handler
--
2.20.1
PATCH v2 2/2 lib8390: Cleanup variables
In reply to Armin WolfReplace variables associated with the former padding solution with skb->* expressions. They are not needed anymore.
--- drivers/net/ethernet/8390/lib8390.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/net/ethernet/8390/lib8390.c +6 -9
@@ -305,17 +305,14 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, {unsigned long e8390_base = dev->base_addr;struct ei_device *ei_local =netdev_priv (dev); -int send_length, output_page; +int output_page;unsigned long flags; -char *data;/* The Hardware does not pad undersized frames */ if (eth_skb_pad (skb)) { dev->stats.tx_dropped++;return NETDEV_TX_OK ; } - data = skb->data; - send_length = skb->len;/* Mask interrupts from the ethercard. SMP: We have to grab the lock here otherwise the IRQ handler
@@ -347,7 +344,7 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb,if (ei_local->tx1 ==0 ) { output_page = ei_local->tx_start_page; - ei_local->tx1 = send_length; + ei_local->tx1 = skb->len;if ((netif_msg_tx_queued (ei_local )) && ei_local->tx2 >0 ) netdev_dbg(dev,
@@ -355,7 +352,7 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, ei_local->tx2, ei_local->lasttx, ei_local->txing); }else if (ei_local->tx2 ==0 ) { output_page = ei_local->tx_start_page +TX_PAGES /2 ; - ei_local->tx2 = send_length; + ei_local->tx2 = skb->len;if ((netif_msg_tx_queued (ei_local )) && ei_local->tx1 >0 ) netdev_dbg(dev,
@@ -380,11 +377,11 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb,* trigger the send later, upon receiving a Tx done interrupt. */ -ei_block_output (dev, send_length, data, output_page); +ei_block_output (dev, skb->len, skb->data, output_page);if (!ei_local->txing) { ei_local->txing =1 ; -NS8390_trigger_send (dev, send_length, output_page); +NS8390_trigger_send (dev, skb->len, output_page);if (output_page == ei_local->tx_start_page) { ei_local->tx1 =-1 ; ei_local->lasttx =-1 ;
@@ -407,8 +404,8 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb,spin_unlock (&ei_local->page_lock);enable_irq_lockdep_irqrestore (dev->irq, &flags);skb_tx_timestamp (skb); + dev->stats.tx_bytes += skb->len;dev_consume_skb_any (skb); - dev->stats.tx_bytes += send_length;return NETDEV_TX_OK ; }
--
2.20.1
Jakub Kicinski
maintainerRe: [PATCH net-next v2 2/2] lib8390: Cleanup variables
drivers/net/ethernet/8390/lib8390.c static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, · line 309
Quoted 5 lines · On Wed, 18 Nov 2020 17:51:07 +0100 Armin Wolf wrote:
drivers/net/ethernet/8390/lib8390.c +1
-1unsigned long e8390_base = dev->base_addr;struct ei_device *ei_local =netdev_priv (dev); -int send_length, output_page; +int output_page;unsigned long flags;
The last two lines should be swapped to follow the reverse xmas tree ordering of variables.
More importantly this driver is marked as:
S: Orphan / Obsolete
in MAINTAINERS. Are you actually using hardware which needs this code, or are those changes purely based on code inspection?
You should either change the state of the driver in MAINTAINERS, or find another driver / part of the kernel to refactor.