remoteproc/mediatek: read IPI buffer offset from FW binary
Subsystems (2)
v2 cover remoteproc/mediatek: read IPI buffer offset from FW binary
This series reads the address of IPI (inter-processor-interrupt) shared buffer from the FW binary itself.
The 1st patch fixes a boundary check bug.
The 2nd patch skips a program header to parse if filesz is 0.
The 3rd patch parses the FW binary to find the shared buffer address.
Changes from v1:
(https://patchwork.kernel.org/project/linux-arm-kernel/cover/[email protected]/)
- rebase on top of some sparse error fixing
- update 3rd patch's commit message to the latest
The series bases on https://patchwork.kernel.org/project/linux-arm-kernel/cover/[email protected]/
Tzung-Bi Shih (3):
remoteproc/mediatek: fix boundary check remoteproc/mediatek: skip if filesz is 0 remoteproc/mediatek: read IPI buffer offset from FW
drivers/remoteproc/mtk_scp.c | 89 +++++++++++++++++++++++------------- 1 file changed, 57 insertions(+), 32 deletions(-)
Signature · 7 lines
2.29.2.299.gdc1121823c-goog _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
PATCH v2 1/3 remoteproc/mediatek: fix boundary check
It is valid if offset+length == sram_size.
For example, sram_size=100, offset=99, length=1. Accessing offset 99 with length 1 is valid.
--- drivers/remoteproc/mtk_scp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/remoteproc/mtk_scp.c +2 -2
@@ -408,11 +408,11 @@ static void *scp_da_to_va(struct rproc *rproc, u64 da, size_t len)if (da < scp->sram_size) { offset = da; -if (offset >=0 && (offset + len) < scp->sram_size) +if (offset >=0 && (offset + len) <= scp->sram_size)return (void __force *)scp->sram_base + offset; }else if (scp->dram_size) { offset = da - scp->dma_addr; -if (offset >=0 && (offset + len) < scp->dram_size) +if (offset >=0 && (offset + len) <= scp->dram_size)return scp->cpu_addr + offset; }
Signature · 7 lines
2.29.2.299.gdc1121823c-goog _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Re: [PATCH v2 1/3] remoteproc/mediatek: fix boundary check
Quoted 15 lines · Tzung-Bi Shih
It is valid if offset+length ==
sram_size.For example, sram_size=100, offset=99, length=1. Accessing offset 99 with length 1 is valid.
Signed-off-by Tzung-Bi Shih <[email protected]>--- drivers/remoteproc/mtk_scp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/remoteproc/mtk_scp.c +0
-0
drivers/remoteproc/mtk_scp.c static void *scp_da_to_va(struct rproc *rproc, u64 da, size_t len) · line 415
Quoted 10 lines
drivers/remoteproc/mtk_scp.c +2
-2@@ -408,11 +408,11 @@ static void *scp_da_to_va(struct rproc *rproc, u64 da, size_t len)if (da < scp->sram_size) { offset = da; -if (offset >=0 && (offset + len) < scp->sram_size) +if (offset >=0 && (offset + len) <= scp->sram_size)return (void __force *)scp->sram_base + offset; }else if (scp->dram_size) { offset = da - scp->dma_addr; -if (offset >=0 && (offset + len) < scp->dram_size) +if (offset >=0 && (offset + len) <= scp->dram_size)
Right, I had the same kind of conversation with the TI folks.
Quoted 11 lines
drivers/remoteproc/mtk_scp.c +0
-0return scp->cpu_addr + offset; }Signature · 7 lines
2.29.2.299.gdc1121823c-goog _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 2/3 remoteproc/mediatek: skip if filesz is 0
In reply to Tzung-Bi ShihThe main purpose of the loop is to load the memory to the SCP SRAM. If filesz is 0, can go to next program header directly.
We don't need to try to validate the FW binary for those filesz==0 segments.
--- drivers/remoteproc/mtk_scp.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/remoteproc/mtk_scp.c +6 -6
@@ -234,12 +234,14 @@ static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw)u32 offset = phdr->p_offset;void __iomem *ptr; -if (phdr->p_type !=PT_LOAD ) -continue ; -dev_dbg (dev,"phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n" , phdr->p_type, da, memsz, filesz); +if (phdr->p_type !=PT_LOAD ) +continue ; +if (!filesz) +continue ; +if (filesz > memsz) {dev_err (dev,"bad phdr filesz 0x%x memsz 0x%x\n" , filesz, memsz);
@@ -263,9 +265,7 @@ static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw) }/* put the segment where the remote processor expects it */ -if (phdr->p_filesz) -scp_memcpy_aligned (ptr, elf_data + phdr->p_offset, - filesz); +scp_memcpy_aligned (ptr, elf_data + phdr->p_offset, filesz); }return ret;
Signature · 7 lines
2.29.2.299.gdc1121823c-goog _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Re: [PATCH v2 2/3] remoteproc/mediatek: skip if filesz is 0
Quoted 34 lines · Tzung-Bi Shih
The main purpose of the loop is to load the memory to the SCP SRAM. If filesz is 0, can go to next program header directly.
We don't need to try to validate the FW binary for those filesz==0 segments.
Signed-off-by Tzung-Bi Shih <[email protected]>--- drivers/remoteproc/mtk_scp.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)drivers/remoteproc/mtk_scp.c +5
-3@@ -234,12 +234,14 @@ static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw)u32 offset = phdr->p_offset;void __iomem *ptr; -if (phdr->p_type !=PT_LOAD ) -continue ; -dev_dbg (dev,"phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n" , phdr->p_type, da, memsz, filesz); +if (phdr->p_type !=PT_LOAD ) +continue ; +if (!filesz) +continue ; +if (filesz > memsz) {dev_err (dev,"bad phdr filesz 0x%x memsz 0x%x\n" , filesz, memsz);
drivers/remoteproc/mtk_scp.c static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw) · line 268
Quoted 7 lines
drivers/remoteproc/mtk_scp.c +1
-3@@ -263,9 +265,7 @@ static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw) }/* put the segment where the remote processor expects it */ -if (phdr->p_filesz) -scp_memcpy_aligned (ptr, elf_data + phdr->p_offset, - filesz); +scp_memcpy_aligned (ptr, elf_data + phdr->p_offset, filesz);
Quoted 11 lines
drivers/remoteproc/mtk_scp.c +0
-0}return ret;Signature · 7 lines
2.29.2.299.gdc1121823c-goog _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 3/3 remoteproc/mediatek: read IPI buffer offset from FW
In reply to Tzung-Bi ShihReads the IPI buffer offset from the FW binary. The information resides in addr of .ipi_buffer section.
Moves scp_ipi_init() to scp_load() phase. The IPI buffer can be initialized only if the offset is clear.
--- drivers/remoteproc/mtk_scp.c | 73 ++++++++++++++++++++++++------------ 1 file changed, 49 insertions(+), 24 deletions(-)
drivers/remoteproc/mtk_scp.c +49 -24
@@ -21,7 +21,7 @@#include "remoteproc_internal.h" #define MAX_CODE_SIZE 0x500000 -#define SCP_FW_END 0x7C000 +#define SECTION_NAME_IPI_BUFFER ".ipi_buffer"/** * scp_get() - get a reference to SCP.
@@ -119,16 +119,24 @@ static void scp_ipi_handler(struct mtk_scp *scp)wake_up (&scp->ack_wq); } -static int scp_ipi_init (struct mtk_scp *scp) +static int scp_elf_read_ipi_buf_addr (struct mtk_scp *scp, +const struct firmware *fw, +size_t *offset); + +static int scp_ipi_init (struct mtk_scp *scp,const struct firmware *fw) { -size_t send_offset =SCP_FW_END -sizeof (struct mtk_share_obj ); -size_t recv_offset = send_offset -sizeof (struct mtk_share_obj ); +int ret; +size_t offset; + + ret =scp_elf_read_ipi_buf_addr (scp, fw, &offset); +if (ret) +return ret; +dev_info (scp->dev,"IPI buf addr %#010zx\n" , offset); -/* shared buffer initialization */ - scp->recv_buf = - (struct mtk_share_obj __iomem *)(scp->sram_base + recv_offset); - scp->send_buf = - (struct mtk_share_obj __iomem *)(scp->sram_base + send_offset); + scp->recv_buf = (struct mtk_share_obj __iomem *) + (scp->sram_base + offset); + scp->send_buf = (struct mtk_share_obj __iomem *) + (scp->sram_base + offset +sizeof (*scp->recv_buf));memset_io (scp->recv_buf,0 ,sizeof (*scp->recv_buf));memset_io (scp->send_buf,0 ,sizeof (*scp->send_buf));
@@ -271,6 +279,32 @@ static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw)return ret; } +static int scp_elf_read_ipi_buf_addr (struct mtk_scp *scp, +const struct firmware *fw, +size_t *offset) +{ +struct elf32_hdr *ehdr; +struct elf32_shdr *shdr, *shdr_strtab; +int i; +const u8 *elf_data = fw->data; +const char *strtab; + + ehdr = (struct elf32_hdr *)elf_data; + shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff); + shdr_strtab = shdr + ehdr->e_shstrndx; + strtab = (const char *)(elf_data + shdr_strtab->sh_offset); + +for (i =0 ; i < ehdr->e_shnum; i++, shdr++) { +if (strcmp (strtab + shdr->sh_name, +SECTION_NAME_IPI_BUFFER ) ==0 ) { + *offset = shdr->sh_addr; +return 0 ; + } + } + +return -ENOENT ; +} +static int mt8183_scp_before_load (struct mtk_scp *scp) {/* Clear SCP to host interrupt */
@@ -350,11 +384,15 @@ static int scp_load(struct rproc *rproc, const struct firmware *fw) ret = scp->data->scp_before_load (scp);if (ret <0 ) -return ret; + goto leave; ret =scp_elf_load_segments (rproc, fw); -clk_disable_unprepare (scp->clk); +if (ret) + goto leave; + ret =scp_ipi_init (scp, fw); +leave: +clk_disable_unprepare (scp->clk);return ret; }
@@ -680,19 +718,6 @@ static int scp_probe(struct platform_device *pdev) goto release_dev_mem; } - ret =clk_prepare_enable (scp->clk); -if (ret) { -dev_err (dev,"failed to enable clocks\n" ); - goto release_dev_mem; - } - - ret =scp_ipi_init (scp); -clk_disable_unprepare (scp->clk); -if (ret) { -dev_err (dev,"Failed to init ipi\n" ); - goto release_dev_mem; - } -/* register SCP initialization IPI */ ret =scp_ipi_register (scp,SCP_IPI_INIT , scp_init_ipi_handler, scp);if (ret) {
Signature · 7 lines
2.29.2.299.gdc1121823c-goog _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Mathieu Poirier
maintainerRe: [PATCH v2 3/3] remoteproc/mediatek: read IPI buffer offset from FW
Quoted 75 lines · Tzung-Bi Shih
Reads the IPI buffer offset from the FW binary. The information resides in addr of .ipi_buffer section.
Moves
scp_ipi_init()toscp_load()phase. The IPI buffer can be initialized only if the offset is clear.Signed-off-by Tzung-Bi Shih <[email protected]>--- drivers/remoteproc/mtk_scp.c | 73 ++++++++++++++++++++++++------------ 1 file changed, 49 insertions(+), 24 deletions(-)drivers/remoteproc/mtk_scp.c +31
-9@@ -21,7 +21,7 @@#include "remoteproc_internal.h" #define MAX_CODE_SIZE 0x500000 -#define SCP_FW_END 0x7C000 +#define SECTION_NAME_IPI_BUFFER ".ipi_buffer"/** * scp_get() - get a reference to SCP. @@ -119,16 +119,24 @@ static void scp_ipi_handler(struct mtk_scp *scp)wake_up (&scp->ack_wq); } -static int scp_ipi_init (struct mtk_scp *scp) +static int scp_elf_read_ipi_buf_addr (struct mtk_scp *scp, +const struct firmware *fw, +size_t *offset); + +static int scp_ipi_init (struct mtk_scp *scp,const struct firmware *fw) { -size_t send_offset =SCP_FW_END -sizeof (struct mtk_share_obj ); -size_t recv_offset = send_offset -sizeof (struct mtk_share_obj ); +int ret; +size_t offset; + + ret =scp_elf_read_ipi_buf_addr (scp, fw, &offset); +if (ret) +return ret; +dev_info (scp->dev,"IPI buf addr %#010zx\n" , offset); -/* shared buffer initialization */ - scp->recv_buf = - (struct mtk_share_obj __iomem *)(scp->sram_base + recv_offset); - scp->send_buf = - (struct mtk_share_obj __iomem *)(scp->sram_base + send_offset); + scp->recv_buf = (struct mtk_share_obj __iomem *) + (scp->sram_base + offset); + scp->send_buf = (struct mtk_share_obj __iomem *) + (scp->sram_base + offset +sizeof (*scp->recv_buf));memset_io (scp->recv_buf,0 ,sizeof (*scp->recv_buf));memset_io (scp->send_buf,0 ,sizeof (*scp->send_buf));@@ -271,6 +279,32 @@ static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw)return ret; } +static int scp_elf_read_ipi_buf_addr (struct mtk_scp *scp, +const struct firmware *fw, +size_t *offset) +{ +struct elf32_hdr *ehdr; +struct elf32_shdr *shdr, *shdr_strtab; +int i; +const u8 *elf_data = fw->data; +const char *strtab; + + ehdr = (struct elf32_hdr *)elf_data; + shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff); + shdr_strtab = shdr + ehdr->e_shstrndx; + strtab = (const char *)(elf_data + shdr_strtab->sh_offset);
drivers/remoteproc/mtk_scp.c static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw) · line 305
Quoted 10 lines
drivers/remoteproc/mtk_scp.c +10
-0+ +for (i =0 ; i < ehdr->e_shnum; i++, shdr++) { +if (strcmp (strtab + shdr->sh_name, +SECTION_NAME_IPI_BUFFER ) ==0 ) { + *offset = shdr->sh_addr; +return 0 ; + } + } + +return -ENOENT ;
Here you are breaking all the current implementation with a firmware image that doesn't have a .ipi_buffer section name. I'm not against this change but you need to make sure you don't break anything else with your changes.
Thanks,
Mathieu
Quoted 51 lines
drivers/remoteproc/mtk_scp.c +8
-15+} +static int mt8183_scp_before_load (struct mtk_scp *scp) {/* Clear SCP to host interrupt */ @@ -350,11 +384,15 @@ static int scp_load(struct rproc *rproc, const struct firmware *fw) ret = scp->data->scp_before_load (scp);if (ret <0 ) -return ret; + goto leave; ret =scp_elf_load_segments (rproc, fw); -clk_disable_unprepare (scp->clk); +if (ret) + goto leave; + ret =scp_ipi_init (scp, fw); +leave: +clk_disable_unprepare (scp->clk);return ret; }@@ -680,19 +718,6 @@ static int scp_probe(struct platform_device *pdev) goto release_dev_mem; } - ret =clk_prepare_enable (scp->clk); -if (ret) { -dev_err (dev,"failed to enable clocks\n" ); - goto release_dev_mem; - } - - ret =scp_ipi_init (scp); -clk_disable_unprepare (scp->clk); -if (ret) { -dev_err (dev,"Failed to init ipi\n" ); - goto release_dev_mem; - } -/* register SCP initialization IPI */ ret =scp_ipi_register (scp,SCP_IPI_INIT , scp_init_ipi_handler, scp);if (ret) {Signature · 7 lines
2.29.2.299.gdc1121823c-goog _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v2 3/3] remoteproc/mediatek: read IPI buffer offset from FW
Quoted 4 lines · Mathieu Poirier
Here you are breaking all the current implementation with a firmware image that doesn't have a .ipi_buffer section name. I'm not against this change but you need to make sure you don't break anything else with your changes.
Thanks for your review. And yes, this change could break MTK SCP when working with legacy firmware. We'll make sure the new firmware in MT8183 also contains the .ipi_buffer section to not really break anything.
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek