catpt: Switch to use list_entry_is_head() helper
Subsystems (3)
PATCH 1/1 catpt: Switch to use list_entry_is_head() helper
Since we got list_entry_is_head() helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.
--- sound/soc/intel/catpt/pcm.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
sound/soc/intel/catpt/pcm.c +5 -7
@@ -331,10 +331,10 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, {struct catpt_dev *cdev =dev_get_drvdata (dai->dev);struct snd_soc_component *component = dai->component; -struct snd_kcontrol *pos, *kctl =NULL ;const char *name;int ret;u32 id = stream->info.stream_hw_id; +struct snd_kcontrol *pos;/* only selected streams have individual controls */ switch (id) {
@@ -356,17 +356,15 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai,list_for_each_entry (pos, &component->card->snd_card->controls, list) {if (pos->private_data == component && - !strncmp (name, pos->id.name,sizeof (pos->id.name))) { - kctl = pos; + !strncmp (name, pos->id.name,sizeof (pos->id.name)))break ; - } } -if (!kctl) +if (list_entry_is_head (pos, &component->card->snd_card->controls, list))return -ENOENT ;if (stream->template->type !=CATPT_STRM_TYPE_LOOPBACK ) -return catpt_set_dspvol (cdev, id, (long *)kctl->private_value); - ret =catpt_ipc_mute_loopback (cdev, id, *(bool *)kctl->private_value); +return catpt_set_dspvol (cdev, id, (long *)pos->private_value); + ret =catpt_ipc_mute_loopback (cdev, id, *(bool *)pos->private_value);if (ret)return CATPT_IPC_ERROR (ret);return 0 ;
Signature · 1 line
2.29.2
Quoted 2 lines · Andy Shevchenko
Since we got
list_entry_is_head()helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.
Thanks for the patch, Andy. One nitpick below.
Quoted 10 lines
Signed-off-by Andy Shevchenko <[email protected]>--- sound/soc/intel/catpt/pcm.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)sound/soc/intel/catpt/pcm.c +0
-0
sound/soc/intel/catpt/pcm.c static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, · line 337
Quoted 8 lines
sound/soc/intel/catpt/pcm.c +1
-1@@ -331,10 +331,10 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, {struct catpt_dev *cdev =dev_get_drvdata (dai->dev);struct snd_soc_component *component = dai->component; -struct snd_kcontrol *pos, *kctl =NULL ;const char *name;int ret;u32 id = stream->info.stream_hw_id; +struct snd_kcontrol *pos;
Shouldn't structs be declared before any primitive-types?
Quoted 26 lines
sound/soc/intel/catpt/pcm.c +4
-6/* only selected streams have individual controls */ switch (id) {@@ -356,17 +356,15 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai,list_for_each_entry (pos, &component->card->snd_card->controls, list) {if (pos->private_data == component && - !strncmp (name, pos->id.name,sizeof (pos->id.name))) { - kctl = pos; + !strncmp (name, pos->id.name,sizeof (pos->id.name)))break ; - } } -if (!kctl) +if (list_entry_is_head (pos, &component->card->snd_card->controls, list))return -ENOENT ;if (stream->template->type !=CATPT_STRM_TYPE_LOOPBACK ) -return catpt_set_dspvol (cdev, id, (long *)kctl->private_value); - ret =catpt_ipc_mute_loopback (cdev, id, *(bool *)kctl->private_value); +return catpt_set_dspvol (cdev, id, (long *)pos->private_value); + ret =catpt_ipc_mute_loopback (cdev, id, *(bool *)pos->private_value);if (ret)return CATPT_IPC_ERROR (ret);return 0 ;
Quoted 5 lines · Cezary
Quoted 2 lines · Andy Shevchenko
Since we got
list_entry_is_head()helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.Thanks for the patch, Andy. One nitpick below.
...
Quoted 9 lines
sound/soc/intel/catpt/pcm.c static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, · line 337
Quoted 7 lines
struct catpt_dev *cdev = dev_get_drvdata(dai->dev); struct snd_soc_component *component = dai->component;sound/soc/intel/catpt/pcm.c +1
-1-struct snd_kcontrol *pos, *kctl =NULL ;const char *name;int ret;u32 id = stream->info.stream_hw_id; +struct snd_kcontrol *pos;Shouldn't structs be declared before any primitive-types?
Good question. I consider the length of the line is more important (to keep reversed xmas tree order).
If you think we should leave as is tell me, I'll send v2.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Rojewski, Cezary
maintainerQuoted 6 lines · Andy Shevchenko
Quoted 5 lines · Cezary
Quoted 2 lines · Andy Shevchenko
Since we got
list_entry_is_head()helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.Thanks for the patch, Andy. One nitpick below.
...
Quoted 10 lines
Quoted 9 lines
sound/soc/intel/catpt/pcm.c static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, · line 337
Quoted 7 lines
struct catpt_dev *cdev = dev_get_drvdata(dai->dev); struct snd_soc_component *component = dai->component;sound/soc/intel/catpt/pcm.c +1
-1-struct snd_kcontrol *pos, *kctl =NULL ;const char *name;int ret;u32 id = stream->info.stream_hw_id; +struct snd_kcontrol *pos;Shouldn't structs be declared before any primitive-types?
Quoted 5 lines
Good question. I consider the length of the line is more important (to keep reversed xmas tree order).
If you think we should leave as is tell me, I'll send v2.
I'm not in favor or against either of options: it comes down to the coding style of the project - sticking to same one makes code cohesive (by project I mean Linux-kernel).
However, to switch entire catpt to reversed xmas tree, more code changes are required (even this very function is an example of that). Leaving as is in this update while considering the subject in other series might be the better outcome.
Czarek
Mark Brown
maintainerQuoted 2 lines · Andy Shevchenko
Since we got
list_entry_is_head()helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] catpt: Switch to use list_entry_is_head() helper
commit: a9830fc388817c90282925694474fae005fec990
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark