Skip to contentSkip to conversation

catpt: Switch to use list_entry_is_head() helper

PATCH In review Andy Shevchenko 3 participants 5 messages Dec 8, 2020 – Dec 28, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 catpt: Switch to use list_entry_is_head() helper

Since we got list_entry_is_head() helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.

---
 sound/soc/intel/catpt/pcm.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
sound/soc/intel/catpt/pcm.c +5 -7
index e5d54bb1c42a..1c7260db3238 100644
@@ -331,10 +331,10 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai,
 {
 	struct catpt_dev *cdev = dev_get_drvdata(dai->dev);
 	struct snd_soc_component *component = dai->component;
-	struct snd_kcontrol *pos, *kctl = NULL;
 	const char *name;
 	int ret;
 	u32 id = stream->info.stream_hw_id;
+	struct snd_kcontrol *pos;
 
 	/* only selected streams have individual controls */
 	switch (id) {
@@ -356,17 +356,15 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai,
 
 	list_for_each_entry(pos, &component->card->snd_card->controls, list) {
 		if (pos->private_data == component &&
-		    !strncmp(name, pos->id.name, sizeof(pos->id.name))) {
-			kctl = pos;
+		    !strncmp(name, pos->id.name, sizeof(pos->id.name)))
 			break;
-		}
 	}
-	if (!kctl)
+	if (list_entry_is_head(pos, &component->card->snd_card->controls, list))
 		return -ENOENT;
 
 	if (stream->template->type != CATPT_STRM_TYPE_LOOPBACK)
-		return catpt_set_dspvol(cdev, id, (long *)kctl->private_value);
-	ret = catpt_ipc_mute_loopback(cdev, id, *(bool *)kctl->private_value);
+		return catpt_set_dspvol(cdev, id, (long *)pos->private_value);
+	ret = catpt_ipc_mute_loopback(cdev, id, *(bool *)pos->private_value);
 	if (ret)
 		return CATPT_IPC_ERROR(ret);
 	return 0;
Signature · 1 line
2.29.2
maintainer Reviewed-by on v1 1/1
#1 lore raw
Quoted 2 lines · Andy Shevchenko

Since we got list_entry_is_head() helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.

Thanks for the patch, Andy. One nitpick below.

Quoted 10 lines
---
  sound/soc/intel/catpt/pcm.c | 12 +++++-------
  1 file changed, 5 insertions(+), 7 deletions(-)
sound/soc/intel/catpt/pcm.c +0 -0
index e5d54bb1c42a..1c7260db3238 100644

sound/soc/intel/catpt/pcm.c static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, · line 337

Quoted 8 lines
sound/soc/intel/catpt/pcm.c +1 -1
@@ -331,10 +331,10 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai,
  {
  	struct catpt_dev *cdev = dev_get_drvdata(dai->dev);
  	struct snd_soc_component *component = dai->component;
-	struct snd_kcontrol *pos, *kctl = NULL;
  	const char *name;
  	int ret;
  	u32 id = stream->info.stream_hw_id;
+	struct snd_kcontrol *pos;

Shouldn't structs be declared before any primitive-types?

Quoted 26 lines
sound/soc/intel/catpt/pcm.c +4 -6
  	/* only selected streams have individual controls */
  	switch (id) {
@@ -356,17 +356,15 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai,
 
  	list_for_each_entry(pos, &component->card->snd_card->controls, list) {
  		if (pos->private_data == component &&
-		    !strncmp(name, pos->id.name, sizeof(pos->id.name))) {
-			kctl = pos;
+		    !strncmp(name, pos->id.name, sizeof(pos->id.name)))
  			break;
-		}
  	}
-	if (!kctl)
+	if (list_entry_is_head(pos, &component->card->snd_card->controls, list))
  		return -ENOENT;
 
  	if (stream->template->type != CATPT_STRM_TYPE_LOOPBACK)
-		return catpt_set_dspvol(cdev, id, (long *)kctl->private_value);
-	ret = catpt_ipc_mute_loopback(cdev, id, *(bool *)kctl->private_value);
+		return catpt_set_dspvol(cdev, id, (long *)pos->private_value);
+	ret = catpt_ipc_mute_loopback(cdev, id, *(bool *)pos->private_value);
  	if (ret)
  		return CATPT_IPC_ERROR(ret);
  	return 0;
#2 lore raw
Quoted 5 lines · Cezary
Quoted 2 lines · Andy Shevchenko

Since we got list_entry_is_head() helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.

Thanks for the patch, Andy. One nitpick below.

...

Quoted 9 lines

sound/soc/intel/catpt/pcm.c static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, · line 337

Quoted 7 lines
  	struct catpt_dev *cdev = dev_get_drvdata(dai->dev);
  	struct snd_soc_component *component = dai->component;
sound/soc/intel/catpt/pcm.c +1 -1
-	struct snd_kcontrol *pos, *kctl = NULL;
  	const char *name;
  	int ret;
  	u32 id = stream->info.stream_hw_id;
+	struct snd_kcontrol *pos;

Shouldn't structs be declared before any primitive-types?

Good question. I consider the length of the line is more important (to keep reversed xmas tree order).

If you think we should leave as is tell me, I'll send v2.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#3 lore raw
Quoted 6 lines · Andy Shevchenko
Quoted 5 lines · Cezary
Quoted 2 lines · Andy Shevchenko

Since we got list_entry_is_head() helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.

Thanks for the patch, Andy. One nitpick below.

...

Quoted 10 lines
Quoted 9 lines

sound/soc/intel/catpt/pcm.c static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, · line 337

Quoted 7 lines
   	struct catpt_dev *cdev = dev_get_drvdata(dai->dev);
   	struct snd_soc_component *component = dai->component;
sound/soc/intel/catpt/pcm.c +1 -1
-	struct snd_kcontrol *pos, *kctl = NULL;
   	const char *name;
   	int ret;
   	u32 id = stream->info.stream_hw_id;
+	struct snd_kcontrol *pos;

Shouldn't structs be declared before any primitive-types?

Quoted 5 lines

Good question. I consider the length of the line is more important (to keep reversed xmas tree order).

If you think we should leave as is tell me, I'll send v2.

I'm not in favor or against either of options: it comes down to the coding style of the project - sticking to same one makes code cohesive (by project I mean Linux-kernel).

However, to switch entire catpt to reversed xmas tree, more code changes are required (even this very function is an example of that). Leaving as is in this update while considering the subject in other series might be the better outcome.

Czarek

maintainer
#4 lore raw
In reply to Andy Shevchenko
Quoted 2 lines · Andy Shevchenko

Since we got list_entry_is_head() helper in the generic header, we may switch catpt to use it. It removes the need in additional variable.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] catpt: Switch to use list_entry_is_head() helper

      commit: a9830fc388817c90282925694474fae005fec990

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark