Skip to contentSkip to conversation

HID: i2c-hid: Reorganize to allow supporting goodix,gt7375p

PATCH Superseded Douglas Anderson 2 participants 7 messages Dec 11, 2020

Subsystems (3)

v7 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v7 cover HID: i2c-hid: Reorganize to allow supporting goodix,gt7375p

The goal of this series is to support the Goodix GT7375P touchscreen. This touchscreen is special because it has power sequencing requirements that necessitate driving a reset GPIO.

To do this, we totally rejigger the way i2c-hid is organized so that it's easier to jam the Goodix support in there.

This series was:
- Tested on a device that uses normal i2c-hid.
- Tested on a device that has a Goodix i2c-hid device.
- Tested on an ACPI device, but an earlier version of the series.

I believe the plan is for Benjamin to land the whole series. Will said this about the arm64 defconfig change (and provided his Ack):

Quoted 6 lines

...there are a few things I really care about
in defconfig (e.g. things like page size!), generally speaking we don't need to Ack everything that changes in there.

That said, might be worth checking whether arm-soc have any defconfig changes queued in -next so you don't end up with conflicts.

Changes in v7:
- Rebase atop commit afdd34c5fa40 ("HID: i2c-hid: show the error ...")

Changes in v6:
- ACPI probe function should have been "static"
- Don't export suspend/resume, just export dev_pm_ops from core.
- Fixed crash in ACPI module (missing init of "client")
- No need for regulator include in the core.
- Removed i2c_device_id table from ACPI module.
- Suspend/resume are no longer exported from the core.

Changes in v5:
- Add shutdown_tail op and use it in ACPI.
- Added mention of i2c-hid in the yaml itself as per Rob.
- Adjusted subject as per Rob.
- i2chid_subclass_data => i2chid_ops.
- power_up_device => power_up (same with power_down).
- subclass => ops.

Changes in v4:
- ("arm64: defconfig: Update config names for i2c-hid rejigger") new for v4.
- Fully rejigger so ACPI and OF are full subclasses.
- Totally redid based on the new subclass system.

Changes in v3:
- Fixed compatible in example.
- Removed Benjamin as a maintainer.
- Rework to use subclassing.
- Updated description.

Changes in v2:
- ("dt-bindings: HID: i2c-hid: Introduce bindings for the Goodix GT7375P") new in v2.
- Get timings based on the compatible string.
- Use a separate compatible string for this new touchscreen.

Douglas Anderson (4):
HID: i2c-hid: Reorganize so ACPI and OF are separate modules
arm64: defconfig: Update config names for i2c-hid rejigger
dt-bindings: input: HID: i2c-hid: Introduce bindings for the Goodix

    GT7375P

HID: i2c-hid: Introduce goodix-i2c-hid using i2c-hid core

 .../bindings/input/goodix,gt7375p.yaml        |  65 +++++
 arch/arm64/configs/defconfig                  |   3 +-
 drivers/hid/Makefile                          |   2 +-
 drivers/hid/i2c-hid/Kconfig                   |  47 +++-
 drivers/hid/i2c-hid/Makefile                  |   6 +-
 drivers/hid/i2c-hid/i2c-hid-acpi.c            | 159 +++++++++++
 drivers/hid/i2c-hid/i2c-hid-core.c            | 254 +++---------------
 drivers/hid/i2c-hid/i2c-hid-of-goodix.c       | 116 ++++++++
 drivers/hid/i2c-hid/i2c-hid-of.c              | 143 ++++++++++
 drivers/hid/i2c-hid/i2c-hid.h                 |  22 ++
 include/linux/platform_data/i2c-hid.h         |  41 ---
 11 files changed, 596 insertions(+), 262 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
 create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi.c
 create mode 100644 drivers/hid/i2c-hid/i2c-hid-of-goodix.c
 create mode 100644 drivers/hid/i2c-hid/i2c-hid-of.c
 delete mode 100644 include/linux/platform_data/i2c-hid.h
Signature · 7 lines
2.29.2.576.ga3fc446d84-goog


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw

PATCH v7 1/4 HID: i2c-hid: Reorganize so ACPI and OF are separate modules

This patch rejiggers the i2c-hid code so that the OF (Open Firmware aka Device Tree) and ACPI support is separated out a bit. The OF and ACPI drivers are now separate modules that wrap the core module.

Essentially, what we're doing here:
* Make "power up" and "power down" a function that can be (optionally) implemented by a given user of the i2c-hid core.
* The OF and ACPI modules are drivers on their own, so they implement probe / remove / suspend / resume / shutdown. The core code provides implementations that OF and ACPI can call into.

We'll organize this so that we now have 3 modules: the old i2c-hid module becomes the "core" module and two new modules will depend on it, handling probing the specific device.

As part of this work, we'll remove the i2c-hid "platform data" concept since it's not needed.

---

Changes in v7:
- Rebase atop commit afdd34c5fa40 ("HID: i2c-hid: show the error ...")

Changes in v6:
- ACPI probe function should have been "static"
- Don't export suspend/resume, just export dev_pm_ops from core.
- Fixed crash in ACPI module (missing init of "client")
- No need for regulator include in the core.
- Removed i2c_device_id table from ACPI module.

Changes in v5:
- Add shutdown_tail op and use it in ACPI.
- i2chid_subclass_data => i2chid_ops.
- power_up_device => power_up (same with power_down).
- subclass => ops.

Changes in v4:
- Fully rejigger so ACPI and OF are full subclasses.

Changes in v3:
- Rework to use subclassing.

Changes in v2:
- Get timings based on the compatible string.
- Use a separate compatible string for this new touchscreen.

 drivers/hid/Makefile                  |   2 +-
 drivers/hid/i2c-hid/Kconfig           |  32 +++-
 drivers/hid/i2c-hid/Makefile          |   5 +-
 drivers/hid/i2c-hid/i2c-hid-acpi.c    | 159 ++++++++++++++++
 drivers/hid/i2c-hid/i2c-hid-core.c    | 254 +++++---------------------
 drivers/hid/i2c-hid/i2c-hid-of.c      | 143 +++++++++++++++
 drivers/hid/i2c-hid/i2c-hid.h         |  22 +++
 include/linux/platform_data/i2c-hid.h |  41 -----
 8 files changed, 397 insertions(+), 261 deletions(-)
 create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi.c
 create mode 100644 drivers/hid/i2c-hid/i2c-hid-of.c
 delete mode 100644 include/linux/platform_data/i2c-hid.h
drivers/hid/Makefile +1 -1
index 014d21fe7dac..a0621a4a65cd 100644
@@ -138,7 +138,7 @@ obj-$(CONFIG_USB_HID)		+= usbhid/
 obj-$(CONFIG_USB_MOUSE)		+= usbhid/
 obj-$(CONFIG_USB_KBD)		+= usbhid/
 
-obj-$(CONFIG_I2C_HID)		+= i2c-hid/
+obj-$(CONFIG_I2C_HID_CORE)	+= i2c-hid/
 
 obj-$(CONFIG_INTEL_ISH_HID)	+= intel-ish-hid/
 obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER)	+= intel-ish-hid/
drivers/hid/i2c-hid/Kconfig +27 -5
index c4e5dfeab2bd..819b7521c182 100644
@@ -2,18 +2,40 @@
 menu "I2C HID support"
 	depends on I2C
 
-config I2C_HID
-	tristate "HID over I2C transport layer"
+config I2C_HID_ACPI
+	tristate "HID over I2C transport layer ACPI driver"
 	default n
-	depends on I2C && INPUT
-	select HID
+	depends on I2C && INPUT && ACPI
+	help
+	  Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
+	  other HID based devices which is connected to your computer via I2C.
+	  This driver supports ACPI-based systems.
+
+	  If unsure, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-hid-acpi.  It will also build/depend on the
+	  module i2c-hid.
+
+config I2C_HID_OF
+	tristate "HID over I2C transport layer Open Firmware driver"
+	default n
+	depends on I2C && INPUT && OF
 	help
 	  Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
 	  other HID based devices which is connected to your computer via I2C.
+	  This driver supports Open Firmware (Device Tree)-based systems.
 
 	  If unsure, say N.
 
 	  This support is also available as a module.  If so, the module
-	  will be called i2c-hid.
+	  will be called i2c-hid-of.  It will also build/depend on the
+	  module i2c-hid.
 
 endmenu
+
+config I2C_HID_CORE
+	tristate
+	default y if I2C_HID_ACPI=y || I2C_HID_OF=y
+	default m if I2C_HID_ACPI=m || I2C_HID_OF=m
+	select HID
drivers/hid/i2c-hid/Makefile +4 -1
index 681b3896898e..9b4a73446841 100644
@@ -3,7 +3,10 @@
 # Makefile for the I2C input drivers
 #
 
-obj-$(CONFIG_I2C_HID)				+= i2c-hid.o
+obj-$(CONFIG_I2C_HID_CORE)			+= i2c-hid.o
 
 i2c-hid-objs					=  i2c-hid-core.o
 i2c-hid-$(CONFIG_DMI)				+= i2c-hid-dmi-quirks.o
+
+obj-$(CONFIG_I2C_HID_ACPI)			+= i2c-hid-acpi.o
+obj-$(CONFIG_I2C_HID_OF)			+= i2c-hid-of.o
drivers/hid/i2c-hid/i2c-hid-acpi.c new file +159 -0

159 lines not on this page · raw message

drivers/hid/i2c-hid/i2c-hid-core.c +41 -213

381 lines not on this page · raw message

drivers/hid/i2c-hid/i2c-hid-of.c new file +143 -0

143 lines not on this page · raw message

drivers/hid/i2c-hid/i2c-hid.h +22 -0
index a8c19aef5824..05a7827d211a 100644
@@ -3,6 +3,7 @@
 #ifndef I2C_HID_H
 #define I2C_HID_H
 
+#include <linux/i2c.h>
 
 #ifdef CONFIG_DMI
 struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name);
@@ -17,4 +18,25 @@ static inline char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
 { return NULL; }
 #endif
 
+/**
+ * struct i2chid_ops - Ops provided to the core.
+ *
+ * @power_up: do sequencing to power up the device.
+ * @power_down: do sequencing to power down the device.
+ * @shutdown_tail: called at the end of shutdown.
+ */
+struct i2chid_ops {
+	int (*power_up)(struct i2chid_ops *ops);
+	void (*power_down)(struct i2chid_ops *ops);
+	void (*shutdown_tail)(struct i2chid_ops *ops);
+};
+
+int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
+		       u16 hid_descriptor_address);
+int i2c_hid_core_remove(struct i2c_client *client);
+
+void i2c_hid_core_shutdown(struct i2c_client *client);
+
+extern const struct dev_pm_ops i2c_hid_core_pm;
+
 #endif
include/linux/platform_data/i2c-hid.h deleted +0 -41

41 lines not on this page · raw message

Signature · 1 line
2.29.2.576.ga3fc446d84-goog
#2 lore raw

Re: [PATCH v7 1/4] HID: i2c-hid: Reorganize so ACPI and OF are separate modules

I love your patch! Perhaps something to improve:

Hi Douglas,

I love your patch! Perhaps something to improve:

[auto build test WARNING on hid/for-next]
[also build test WARNING on next-20201211]
[cannot apply to jikos-trivial/for-next v5.10-rc7]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Douglas-Anderson/HID-i2c-hid-Reorganize-to-allow-supporting-goodix-gt7375p/20201212-014239
base:   https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git for-next
config: powerpc-allyesconfig (attached as .config)
compiler: powerpc64-linux-gcc (GCC) 9.3.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/5a371169c8cc2abb463e32db3a3fe60ea34efc87
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Douglas-Anderson/HID-i2c-hid-Reorganize-to-allow-supporting-goodix-gt7375p/20201212-014239 git checkout 5a371169c8cc2abb463e32db3a3fe60ea34efc87
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=powerpc

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

>> drivers/hid/i2c-hid/i2c-hid-core.c:1050:5: warning: no previous prototype for 'i2c_hid_core_suspend' [-Wmissing-prototypes]
    1050 | int i2c_hid_core_suspend(struct device *dev)
         |     ^~~~~~~~~~~~~~~~~~~~
>> drivers/hid/i2c-hid/i2c-hid-core.c:1084:5: warning: no previous prototype for 'i2c_hid_core_resume' [-Wmissing-prototypes]

1084 | int i2c_hid_core_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~

vim +/i2c_hid_core_suspend +1050 drivers/hid/i2c-hid/i2c-hid-core.c

1048
1049 #ifdef CONFIG_PM_SLEEP

> 1050	int i2c_hid_core_suspend(struct device *dev)
  1051	{
  1052		struct i2c_client *client = to_i2c_client(dev);
  1053		struct i2c_hid *ihid = i2c_get_clientdata(client);
  1054		struct hid_device *hid = ihid->hid;
  1055		int ret;
  1056		int wake_status;
  1057	
  1058		if (hid->driver && hid->driver->suspend) {
  1059			ret = hid->driver->suspend(hid, PMSG_SUSPEND);
  1060			if (ret < 0)
  1061				return ret;
  1062		}
  1063	
  1064		/* Save some power */
  1065		i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
  1066	
  1067		disable_irq(client->irq);
  1068	
  1069		if (device_may_wakeup(&client->dev)) {
  1070			wake_status = enable_irq_wake(client->irq);
  1071			if (!wake_status)
  1072				ihid->irq_wake_enabled = true;
  1073			else
  1074				hid_warn(hid, "Failed to enable irq wake: %d\n",
  1075					wake_status);
  1076		} else {
  1077			i2c_hid_core_power_down(ihid);
  1078		}
  1079	
  1080		return 0;
  1081	}
  1082	EXPORT_SYMBOL_GPL(i2c_hid_core_suspend);
  1083	
> 1084	int i2c_hid_core_resume(struct device *dev)

1085 {
1086 int ret;
1087 struct i2c_client *client = to_i2c_client(dev);
1088 struct i2c_hid *ihid = i2c_get_clientdata(client);
1089 struct hid_device *hid = ihid->hid;
1090 int wake_status;
1091
1092 if (!device_may_wakeup(&client->dev)) {
1093 i2c_hid_core_power_up(ihid);
1094 } else if (ihid->irq_wake_enabled) {
1095 wake_status = disable_irq_wake(client->irq);
1096 if (!wake_status)
1097 ihid->irq_wake_enabled = false;
1098 else
1099 hid_warn(hid, "Failed to disable irq wake: %d\n",
1100 wake_status);
1101 }
1102
1103 enable_irq(client->irq);
1104
1105 /* Instead of resetting device, simply powers the device on. This
1106 * solves "incomplete reports" on Raydium devices 2386:3118 and
1107 * 2386:4B33 and fixes various SIS touchscreens no longer sending
1108 * data after a suspend/resume.
1109 *
1110 * However some ALPS touchpads generate IRQ storm without reset, so
1111 * let's still reset them here.
1112 */
1113 if (ihid->quirks & I2C_HID_QUIRK_RESET_ON_RESUME)
1114 ret = i2c_hid_hwreset(client);
1115 else
1116 ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
1117
1118 if (ret)
1119 return ret;
1120
1121 if (hid->driver && hid->driver->reset_resume) {
1122 ret = hid->driver->reset_resume(hid);
1123 return ret;
1124 }
1125
1126 return 0;
1127 }
1128 EXPORT_SYMBOL_GPL(i2c_hid_core_resume);
1129 #endif
1130

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#3 lore raw

Re: [PATCH v7 1/4] HID: i2c-hid: Reorganize so ACPI and OF are separate modules

Hi,

Quoted 29 lines · kernel test robot

Hi Douglas,

I love your patch! Perhaps something to improve:

[auto build test WARNING on hid/for-next]
[also build test WARNING on next-20201211]
[cannot apply to jikos-trivial/for-next v5.10-rc7]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Douglas-Anderson/HID-i2c-hid-Reorganize-to-allow-supporting-goodix-gt7375p/20201212-014239
base:   https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git for-next
config: powerpc-allyesconfig (attached as .config)
compiler: powerpc64-linux-gcc (GCC) 9.3.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/5a371169c8cc2abb463e32db3a3fe60ea34efc87
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Douglas-Anderson/HID-i2c-hid-Reorganize-to-allow-supporting-goodix-gt7375p/20201212-014239 git checkout 5a371169c8cc2abb463e32db3a3fe60ea34efc87
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=powerpc

If you fix the issue, kindly add following tag as appropriate

Quoted 8 lines

All warnings (new ones prefixed by >>):

Quoted 1 line
Quoted 1 line

drivers/hid/i2c-hid/i2c-hid-core.c:1050:5: warning: no previous prototype for 'i2c_hid_core_suspend' [-Wmissing-prototypes]

1050 | int i2c_hid_core_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~

Quoted 1 line
Quoted 1 line

drivers/hid/i2c-hid/i2c-hid-core.c:1084:5: warning: no previous prototype for 'i2c_hid_core_resume' [-Wmissing-prototypes]

1084 | int i2c_hid_core_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~

Yup, that's definitely true. At the risk of a little extra spam, I'll spin a quick v8 making these static so it's ready to land. I guess I missed doing that when we stopped exporting them and my compiler doesn't yell about this.

-Doug

#4 lore raw

PATCH v7 2/4 arm64: defconfig: Update config names for i2c-hid rejigger

In reply to Douglas Anderson

The i2c-hid driver has been split in two. Let's enable both halves.

---

(no changes since v4)

Changes in v4:
- ("arm64: defconfig: Update config names for i2c-hid rejigger") new for v4.

 arch/arm64/configs/defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/configs/defconfig +2 -1
index 838301650a79..326198305beb 100644
@@ -749,7 +749,8 @@ CONFIG_SND_SOC_WM8904=m
 CONFIG_SND_SOC_WSA881X=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
-CONFIG_I2C_HID=m
+CONFIG_I2C_HID_ACPI=m
+CONFIG_I2C_HID_OF=m
 CONFIG_USB_CONN_GPIO=m
 CONFIG_USB=y
 CONFIG_USB_OTG=y
Signature · 7 lines
2.29.2.576.ga3fc446d84-goog


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#5 lore raw

PATCH v7 3/4 dt-bindings: input: HID: i2c-hid: Introduce bindings for the Goodix GT7375P

In reply to Douglas Anderson

This adds new bindings for the Goodix GT7375P touchscreen. While this touchscreen's communications are based on the generic "i2c-over-hid" protocol, it needs special power sequencing and thus gets its own compatible and bindings.

---

(no changes since v5)

Changes in v5:
- Added mention of i2c-hid in the yaml itself as per Rob.
- Adjusted subject as per Rob.

Changes in v3:
- Fixed compatible in example.
- Removed Benjamin as a maintainer.
- Updated description.

Changes in v2:
- ("dt-bindings: HID: i2c-hid: Introduce bindings for the Goodix GT7375P") new in v2.

 .../bindings/input/goodix,gt7375p.yaml        | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
Documentation/devicetree/bindings/input/goodix,gt7375p.yaml new file +65 -0
new file mode 100644
index 000000000000..fe1c5016f7f3
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT7375P touchscreen
+
+maintainers:
+  - Douglas Anderson <[email protected]>
+
+description:
+  Supports the Goodix GT7375P touchscreen.
+  This touchscreen uses the i2c-hid protocol but has some non-standard
+  power sequencing required.
+
+properties:
+  compatible:
+    items:
+      - const: goodix,gt7375p
+
+  reg:
+    enum:
+      - 0x5d
+      - 0x14
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    true
+
+  vdd-supply:
+    description: The 3.3V supply to the touchscreen.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ap_ts: touchscreen@5d {
+        compatible = "goodix,gt7375p";
+        reg = <0x5d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vdd-supply = <&pp3300_ts>;
+      };
+    };
Signature · 1 line
2.29.2.576.ga3fc446d84-goog
#6 lore raw

PATCH v7 4/4 HID: i2c-hid: Introduce goodix-i2c-hid using i2c-hid core

In reply to Douglas Anderson

Goodix i2c-hid touchscreens are mostly i2c-hid compliant but have some special power sequencing requirements, including the need to drive a reset line during the sequencing.

Let's use the new rejiggering of i2c-hid to support this with a thin wrapper driver to support the first Goodix i2c-hid touchscreen:
GT7375P

---

(no changes since v6)

Changes in v6:
- Suspend/resume are no longer exported from the core.

Changes in v5:
- i2chid_subclass_data => i2chid_ops.
- power_up_device => power_up (same with power_down).
- subclass => ops.

Changes in v4:
- Totally redid based on the new subclass system.

Changes in v3:
- Rework to use subclassing.

 drivers/hid/i2c-hid/Kconfig             |  19 +++-
 drivers/hid/i2c-hid/Makefile            |   1 +
 drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 116 ++++++++++++++++++++++++
 3 files changed, 134 insertions(+), 2 deletions(-)
 create mode 100644 drivers/hid/i2c-hid/i2c-hid-of-goodix.c
drivers/hid/i2c-hid/Kconfig +17 -2
index 819b7521c182..a16c6a69680b 100644
@@ -32,10 +32,25 @@ config I2C_HID_OF
 	  will be called i2c-hid-of.  It will also build/depend on the
 	  module i2c-hid.
 
+config I2C_HID_OF_GOODIX
+	tristate "Driver for Goodix hid-i2c based devices on OF systems"
+	default n
+	depends on I2C && INPUT && OF
+	help
+	  Say Y here if you want support for Goodix i2c devices that use
+	  the i2c-hid protocol on Open Firmware (Device Tree)-based
+	  systems.
+
+	  If unsure, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-hid-of-goodix.  It will also build/depend on
+	  the module i2c-hid.
+
 endmenu
 
 config I2C_HID_CORE
 	tristate
-	default y if I2C_HID_ACPI=y || I2C_HID_OF=y
-	default m if I2C_HID_ACPI=m || I2C_HID_OF=m
+	default y if I2C_HID_ACPI=y || I2C_HID_OF=y || I2C_HID_OF_GOODIX=y
+	default m if I2C_HID_ACPI=m || I2C_HID_OF=m || I2C_HID_OF_GOODIX=m
 	select HID
drivers/hid/i2c-hid/Makefile +1 -0
index 9b4a73446841..302545a771f3 100644
@@ -10,3 +10,4 @@ i2c-hid-$(CONFIG_DMI)				+= i2c-hid-dmi-quirks.o
 
 obj-$(CONFIG_I2C_HID_ACPI)			+= i2c-hid-acpi.o
 obj-$(CONFIG_I2C_HID_OF)			+= i2c-hid-of.o
+obj-$(CONFIG_I2C_HID_OF_GOODIX)			+= i2c-hid-of-goodix.o
drivers/hid/i2c-hid/i2c-hid-of-goodix.c new file +116 -0

116 lines not on this page · raw message

Signature · 1 line
2.29.2.576.ga3fc446d84-goog