Bluetooth: Add initial implementation of CIS connections
Subsystems (2)
Luiz Augusto von Dentz
maintainerPATCH 1/3 Bluetooth: Add initial implementation of CIS connections
From: Luiz Augusto von Dentz <[email protected]>
This adds the initial implementation of CIS connections and introduces the ISO packets/links along with is enabled with use CONFIG_BT_ISO Kconfig option.
--- include/net/bluetooth/bluetooth.h | 33 +++- include/net/bluetooth/hci.h | 19 ++ include/net/bluetooth/hci_core.h | 84 ++++++++- include/net/bluetooth/hci_sock.h | 2 + net/bluetooth/Kconfig | 9 + net/bluetooth/af_bluetooth.c | 4 +- net/bluetooth/hci_conn.c | 286 ++++++++++++++++++++++++++++++ net/bluetooth/hci_core.c | 261 ++++++++++++++++++++++----- net/bluetooth/hci_event.c | 242 +++++++++++++++++++++++++ 9 files changed, 888 insertions(+), 52 deletions(-)
include/net/bluetooth/bluetooth.h +32 -1
@@ -55,6 +55,8 @@#define BTPROTO_CMTP 5#define BTPROTO_HIDP 6#define BTPROTO_AVDTP 7 +#define BTPROTO_ISO 8 +#define BTPROTO_LAST BTPROTO_ISO#define SOL_HCI 0#define SOL_L2CAP 6
@@ -149,10 +151,39 @@ struct bt_voice {#define BT_MODE_LE_FLOWCTL 0x03#define BT_MODE_EXT_FLOWCTL 0x04 -#define BT_PKT_STATUS 16 +#define BT_PKT_STATUS 16#define BT_SCM_PKT_STATUS 0x03 +#define BT_ISO_QOS 17 + +#define BT_ISO_QOS_CIG_UNSET 0xff +#define BT_ISO_QOS_CIS_UNSET 0xff + +struct bt_iso_io_qos { +__u32 interval; +__u16 latency; +__u16 sdu; +__u8 phy; +__u8 rtn; +}; + +struct bt_iso_qos { +__u8 cig; +__u8 cis; +__u8 sca; +__u8 packing; +__u8 framing; +struct bt_iso_io_qos in; +struct bt_iso_io_qos out; +}; + +#define BT_ISO_PHY_1M 0x01 +#define BT_ISO_PHY_2M 0x02 +#define BT_ISO_PHY_CODED 0x04 +#define BT_ISO_PHY_ANY (BT_ISO_PHY_1M | BT_ISO_PHY_2M | \ + BT_ISO_PHY_CODED) + __printf(1, 2)void bt_info (const char *fmt, ...);__printf (1 ,2 )
include/net/bluetooth/hci.h +19 -0
@@ -1884,6 +1884,25 @@ struct hci_cp_le_reject_cis {__u8 reason; } __packed; +#define HCI_OP_LE_SETUP_ISO_PATH 0x206e +struct hci_cp_le_setup_iso_path { +__le16 handle; +__u8 direction; +__u8 path; +__u8 codec; +__le16 codec_cid; +__le16 codec_vid; +__u8 delay[3 ]; +__u8 codec_cfg_len; +__u8 codec_cfg[0 ]; +} __attribute__ ((packed)); + +#define HCI_OP_LE_SET_HOST_FEATURE 0x2074 +struct hci_cp_le_set_host_feature { +__u8 bit_number; +__u8 bit_value; +} __packed; +/* ---- HCI Events ---- */ #define HCI_EV_INQUIRY_COMPLETE 0x01
include/net/bluetooth/hci_core.h +83 -1
187 lines not on this page · raw message
include/net/bluetooth/hci_sock.h +2 -0
@@ -124,6 +124,8 @@ struct hci_dev_info {__u16 acl_pkts;__u16 sco_mtu;__u16 sco_pkts; +__u16 iso_mtu; +__u16 iso_pkts;struct hci_dev_stats stat; };
net/bluetooth/Kconfig +9 -0
@@ -29,6 +29,7 @@ menuconfig BT SCO audio links L2CAP (Logical Link Control and Adaptation Protocol) SMP (Security Manager Protocol) on LE (Low Energy) links + ISO isochronous links HCI Device drivers (Interface to the hardware) RFCOMM Module (RFCOMM Protocol) BNEP Module (Bluetooth Network Encapsulation Protocol)
@@ -77,6 +78,14 @@ config BT_LE Bluetooth Low Energy includes support low-energy physical layer available with Bluetooth version 4.0 or later. +config BT_ISO + bool "Bluetooth Isochronous (ISO) Channels support (Experimental)" + depends on BT_LE + help + Bluetooth Isochronous Channels includes support for + Connected Isochronous Stream (CIS) and Broadcast Isochronous Stream + (BIS). + config BT_6LOWPAN tristate "Bluetooth 6LoWPAN support" depends on BT_LE && 6LOWPAN
net/bluetooth/af_bluetooth.c +3 -1
@@ -38,7 +38,7 @@#include "selftest.h" /* Bluetooth sockets */ -#define BT_MAX_PROTO 8 +#define BT_MAX_PROTO BTPROTO_LAST + 1static const struct net_proto_family *bt_proto[BT_MAX_PROTO ];static DEFINE_RWLOCK (bt_proto_lock);
@@ -52,6 +52,7 @@ static const char *const bt_key_strings[BT_MAX_PROTO] = {"sk_lock-AF_BLUETOOTH-BTPROTO_CMTP" ,"sk_lock-AF_BLUETOOTH-BTPROTO_HIDP" ,"sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP" , + "sk_lock-AF_BLUETOOTH-BTPROTO_ISO", };static struct lock_class_key bt_slock_key[BT_MAX_PROTO ];
@@ -64,6 +65,7 @@ static const char *const bt_slock_key_strings[BT_MAX_PROTO] = {"slock-AF_BLUETOOTH-BTPROTO_CMTP" ,"slock-AF_BLUETOOTH-BTPROTO_HIDP" ,"slock-AF_BLUETOOTH-BTPROTO_AVDTP" , + "slock-AF_BLUETOOTH-BTPROTO_ISO", };void bt_sock_reclassify_lock (struct sock *sk,int proto)
net/bluetooth/hci_conn.c +286 -0
298 lines not on this page · raw message
net/bluetooth/hci_core.c +212 -49
336 lines not on this page · raw message
net/bluetooth/hci_event.c +242 -0
292 lines not on this page · raw message
Signature · 1 line
2.26.2
Luiz Augusto von Dentz
maintainerPATCH 2/3 Bluetooth: Add BTPROTO_ISO socket type
From: Luiz Augusto von Dentz <[email protected]>
This introduces a new socket type BTPROTO_ISO which can be enabled with use of CONFIG_BT_ISO_SOCKET Kconfig option, it can used to initiate/accept connection and transfer packets between userspace and kernel similarly to how BTPROTO_SCO works.
--- include/net/bluetooth/bluetooth.h | 14 + include/net/bluetooth/hci_core.h | 18 +- include/net/bluetooth/iso.h | 36 + net/bluetooth/Kconfig | 7 + net/bluetooth/Makefile | 1 + net/bluetooth/af_bluetooth.c | 13 +- net/bluetooth/hci_core.c | 7 +- net/bluetooth/iso.c | 1406 +++++++++++++++++++++++++++++ 8 files changed, 1497 insertions(+), 5 deletions(-) create mode 100644 include/net/bluetooth/iso.h create mode 100644 net/bluetooth/iso.c
include/net/bluetooth/bluetooth.h +14 -0
@@ -489,6 +489,20 @@ static inline void sco_exit(void) }#endif +#if IS_ENABLED (CONFIG_BT_ISO_SOCKET ) +int iso_init (void ); +void iso_exit (void ); +#else +static inline int iso_init (void ) +{ +return 0 ; +} + +static inline void iso_exit (void ) +{ +} +#endif +int mgmt_init (void );void mgmt_exit (void );
include/net/bluetooth/hci_core.h +16 -2
@@ -762,6 +762,21 @@ static inline void sco_recv_scodata(struct hci_conn *hcon, struct sk_buff *skb) }#endif +#if IS_ENABLED (CONFIG_BT_ISO_SOCKET ) +int iso_connect_ind (struct hci_dev *hdev,bdaddr_t *bdaddr,__u8 *flags); +void iso_recv (struct hci_conn *hcon,struct sk_buff *skb,u16 flags); +#else +static inline int iso_connect_ind (struct hci_dev *hdev,bdaddr_t *bdaddr, +__u8 *flags) +{ +return 0 ; +} +static inline void iso_recv (struct hci_conn *hcon,struct sk_buff *skb, +u16 flags) +{ +} +#endif +/* ----- Inquiry cache ----- */ #define INQUIRY_CACHE_AGE_MAX (HZ*30)/* 30 seconds */ #define INQUIRY_ENTRY_AGE_MAX (HZ*60)/* 60 seconds */
@@ -1487,8 +1502,7 @@ static inline int hci_proto_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr,return sco_connect_ind (hdev, bdaddr, flags);case ISO_LINK : -/* TODO: Handle connection indication */ -return -EINVAL ; +return iso_connect_ind (hdev, bdaddr, flags);default :BT_ERR ("unknown link type %d" , type);
include/net/bluetooth/iso.h new file +36 -0
@@ -0,0 +1,36 @@ +/* +BlueZ - Bluetooth protocol stack for Linux +Copyright (C) 2020 Intel Corporation + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License version 2 as +published by the Free Software Foundation; + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. +IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY +CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES +WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + +ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, +COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS +SOFTWARE IS DISCLAIMED. +*/ + +#ifndef __ISO_H +#define __ISO_H + +/* ISO defaults */ +#define ISO_DEFAULT_MTU 251 + +/* ISO socket address */ +struct sockaddr_iso { +sa_family_t iso_family; +bdaddr_t iso_bdaddr; +__u8 iso_bdaddr_type; +}; + +#endif /* __ISO_H */
net/bluetooth/Kconfig +7 -0
@@ -86,6 +86,13 @@ config BT_ISO Connected Isochronous Stream (CIS) and Broadcast Isochronous Stream (BIS). +config BT_ISO_SOCKET + bool "Bluetooth Isochronous (ISO) Socket support (Experimental)" + depends on BT_ISO + help + Bluetooth Isochronous Socket includes support for BTPROTO_ISO socket + family. + config BT_6LOWPAN tristate "Bluetooth 6LoWPAN support" depends on BT_LE && 6LOWPAN
net/bluetooth/Makefile +1 -0
@@ -17,6 +17,7 @@ bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \ ecdh_helper.o hci_request.o mgmt_util.o mgmt_config.o bluetooth-$(CONFIG_BT_BREDR) += sco.o +bluetooth-$(CONFIG_BT_ISO_SOCKET) += iso.o bluetooth-$(CONFIG_BT_HS) += a2mp.o amp.o bluetooth-$(CONFIG_BT_LEDS) += leds.o bluetooth-$(CONFIG_BT_MSFTEXT) += msft.o
net/bluetooth/af_bluetooth.c +12 -1
@@ -758,12 +758,20 @@ static int __init bt_init(void)if (err) goto cleanup_cap; +if (IS_ENABLED (CONFIG_BT_ISO_SOCKET )) { + err =iso_init (); +if (err) + goto cleanup_sco; + } + err =mgmt_init ();if (err) - goto cleanup_sco; + goto cleanup_iso;return 0 ; +cleanup_iso: +iso_exit (); cleanup_sco:sco_exit (); cleanup_cap:
@@ -781,6 +789,9 @@ static void __exit bt_exit(void) {mgmt_exit (); +if (IS_ENABLED (CONFIG_BT_ISO_SOCKET )) +iso_exit (); +sco_exit ();l2cap_exit ();
net/bluetooth/hci_core.c +5 -2
@@ -4972,8 +4972,11 @@ static void hci_isodata_packet(struct hci_dev *hdev, struct sk_buff *skb) conn =hci_conn_hash_lookup_handle (hdev, handle);hci_dev_unlock (hdev); -/* TODO: Send to upper protocol */ -if (!conn) { +if (conn) { +/* Send to upper protocol */ +iso_recv (conn, skb, flags); +return ; + }else {bt_dev_err (hdev,"ISO packet for unknown connection handle %d" , handle); }
net/bluetooth/iso.c new file +1406 -0
1,406 lines not on this page · raw message
Signature · 1 line
2.26.2
kernel test robot
build botRe: [PATCH 2/3] Bluetooth: Add BTPROTO_ISO socket type
I love your patch! Perhaps something to improve:
Hi Luiz,
I love your patch! Perhaps something to improve:
[auto build test WARNING on bluetooth-next/master]
[also build test WARNING on v5.11-rc1 next-20201223]
[cannot apply to bluetooth/master]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Luiz-Augusto-von-Dentz/Bluetooth-Add-initial-implementation-of-CIS-connections/20201222-054425 base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master config: ia64-allmodconfig (attached as .config) compiler: ia64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/0c29289286983b97fb21b564e19fc1eed47ae0bd
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Luiz-Augusto-von-Dentz/Bluetooth-Add-initial-implementation-of-CIS-connections/20201222-054425 git checkout 0c29289286983b97fb21b564e19fc1eed47ae0bd
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
In file included from net/bluetooth/iso.c:30:
>> include/net/bluetooth/bluetooth.h:161:30: warning: initialized field overwritten [-Woverride-init]
161 | #define BT_ISO_QOS_CIS_UNSET 0xff
| ^~~~
net/bluetooth/iso.c:529:10: note: in expansion of macro 'BT_ISO_QOS_CIS_UNSET'
529 | .cig = BT_ISO_QOS_CIS_UNSET,
| ^~~~~~~~~~~~~~~~~~~~
include/net/bluetooth/bluetooth.h:161:30: note: (near initialization for 'default_qos.cig')
161 | #define BT_ISO_QOS_CIS_UNSET 0xff
| ^~~~
net/bluetooth/iso.c:529:10: note: in expansion of macro 'BT_ISO_QOS_CIS_UNSET'
529 | .cig = BT_ISO_QOS_CIS_UNSET,
| ^~~~~~~~~~~~~~~~~~~~Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for FRAME_POINTER
Depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
Selected by
- FAULT_INJECTION_STACKTRACE_FILTER && FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT && !X86_64 && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM && !ARC && !X86
vim +161 include/net/bluetooth/bluetooth.h
7c800e5d3fe2926 Luiz Augusto von Dentz 2020-12-21 1597c800e5d3fe2926 Luiz Augusto von Dentz 2020-12-21 160 #define BT_ISO_QOS_CIG_UNSET 0xff7c800e5d3fe2926 Luiz Augusto von Dentz 2020-12-21 @161 #define BT_ISO_QOS_CIS_UNSET 0xff7c800e5d3fe2926 Luiz Augusto von Dentz 2020-12-21 162
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Luiz Augusto von Dentz
maintainerPATCH 3/3 Bluetooth: btusb: Add support for ISO packets
In reply to Luiz Augusto von DentzFrom: Luiz Augusto von Dentz <[email protected]>
This enabled btusb driver to properly transmit ISO packets.
--- drivers/bluetooth/btusb.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/bluetooth/btusb.c +14 -0
@@ -1587,6 +1587,13 @@ static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb) hdev->stat.sco_tx++;return submit_tx_urb (hdev, urb); + +case HCI_ISODATA_PKT : + urb =alloc_bulk_urb (hdev, skb); +if (IS_ERR (urb)) +return PTR_ERR (urb); + +return submit_or_queue_tx_urb (hdev, urb); }return -EILSEQ ;
@@ -2393,6 +2400,13 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) hdev->stat.sco_tx++;return submit_tx_urb (hdev, urb); + +case HCI_ISODATA_PKT : + urb =alloc_bulk_urb (hdev, skb); +if (IS_ERR (urb)) +return PTR_ERR (urb); + +return submit_or_queue_tx_urb (hdev, urb); }return -EILSEQ ;
Signature · 1 line
2.26.2
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=405017
---Test result---
##############################
Test: CheckPatch - PASS
##############################
Test: CheckGitLint - FAIL
workflow: Add workflow files for ci
1: T1 Title exceeds max length (92>72): "Merge fb54dab4c8c1b24ffb34be85ebd93766c0fc438c into cc63acd67663d4d8926873437ddc1910d2460c14" 3: B6 Body message is missing
Bluetooth: Add initial implementation of CIS connections
1: T1 Title exceeds max length (92>72): "Merge fb54dab4c8c1b24ffb34be85ebd93766c0fc438c into cc63acd67663d4d8926873437ddc1910d2460c14" 3: B6 Body message is missing
Bluetooth: Add BTPROTO_ISO socket type
1: T1 Title exceeds max length (92>72): "Merge fb54dab4c8c1b24ffb34be85ebd93766c0fc438c into cc63acd67663d4d8926873437ddc1910d2460c14" 3: B6 Body message is missing
Bluetooth: btusb: Add support for ISO packets
1: T1 Title exceeds max length (92>72): "Merge fb54dab4c8c1b24ffb34be85ebd93766c0fc438c into cc63acd67663d4d8926873437ddc1910d2460c14" 3: B6 Body message is missing
##############################
Test: CheckBuildK - PASS
##############################
Test: CheckTestRunner: Setup - PASS
##############################
Test: CheckTestRunner: l2cap-tester - PASS
Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6
##############################
Test: CheckTestRunner: bnep-tester - PASS
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: mgmt-tester - FAIL
Total: 416, Passed: 394 (94.7%), Failed: 8, Not Run: 14
##############################
Test: CheckTestRunner: rfcomm-tester - PASS
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: sco-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: smp-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: userchan-tester - PASS
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0---
Regards,
Linux Bluetooth
c[?7l[2JSeaBIOS (version 1.13.0-1ubuntu1) Booting from ROM..c[?7l[2Jearly console in extract_kernelinput_data: 0x0000000001e782e0input_len: 0x000000000034efe0
output: 0x0000000001000000output_len: 0x0000000001195364kernel_total_size: 0x000000000102c000needed_size: 0x0000000001200000trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.10.0-g34e646f46868 (root@0a141ac9fc74) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Mon Dec 21 22:11:02 UTC 2020
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/l2cap-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/l2cap-tester
New process 38 created
Changing into directory /github/workspace
Basic L2CAP Socket - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Basic L2CAP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic L2CAP Socket - Success - setup complete
Basic L2CAP Socket - Success - run
Basic L2CAP Socket - Success - test passed
Basic L2CAP Socket - Success - teardown
Index Removed callback
Index: 0x0000
Basic L2CAP Socket - Success - teardown complete
Basic L2CAP Socket - Success - done
Non-connected getpeername - Failure - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Non-connected getpeername - Failure - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Non-connected getpeername - Failure - setup complete Non-connected getpeername - Failure - run Non-connected getpeername - Failure - test passed Non-connected getpeername - Failure - teardown
Index Removed callback
Index: 0x0000
Non-connected getpeername - Failure - teardown complete Non-connected getpeername - Failure - done
L2CAP BR/EDR Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Success - setup complete
L2CAP BR/EDR Client - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Success - test passed
L2CAP BR/EDR Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Success - teardown complete
L2CAP BR/EDR Client - Success - done
L2CAP BR/EDR Client SSP - Success 1 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client SSP - Success 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 1 - setup complete L2CAP BR/EDR Client SSP - Success 1 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 1 - test passed L2CAP BR/EDR Client SSP - Success 1 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client SSP - Success 1 - teardown complete L2CAP BR/EDR Client SSP - Success 1 - done
L2CAP BR/EDR Client SSP - Success 2 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client SSP - Success 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 2 - setup complete L2CAP BR/EDR Client SSP - Success 2 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 2 - test passed L2CAP BR/EDR Client SSP - Success 2 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client SSP - Success 2 - teardown complete L2CAP BR/EDR Client SSP - Success 2 - done
L2CAP BR/EDR Client PIN Code - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client PIN Code - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client PIN Code - Success - setup complete L2CAP BR/EDR Client PIN Code - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client PIN Code - Success - test passed L2CAP BR/EDR Client PIN Code - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client PIN Code - Success - teardown complete L2CAP BR/EDR Client PIN Code - Success - done
L2CAP BR/EDR Client - Read Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Read Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Read Success - setup complete L2CAP BR/EDR Client - Read Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Read Success - test passed L2CAP BR/EDR Client - Read Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Read Success - teardown complete L2CAP BR/EDR Client - Read Success - done
L2CAP BR/EDR Client - Write Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Write Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Write Success - setup complete L2CAP BR/EDR Client - Write Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Write Success - test passed L2CAP BR/EDR Client - Write Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Write Success - teardown complete L2CAP BR/EDR Client - Write Success - done
L2CAP BR/EDR Client - Invalid PSM 1 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Invalid PSM 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 1 - setup complete L2CAP BR/EDR Client - Invalid PSM 1 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 1 - test passed L2CAP BR/EDR Client - Invalid PSM 1 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Invalid PSM 1 - teardown complete L2CAP BR/EDR Client - Invalid PSM 1 - done
L2CAP BR/EDR Client - Invalid PSM 2 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Invalid PSM 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 2 - setup complete L2CAP BR/EDR Client - Invalid PSM 2 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 2 - test passed L2CAP BR/EDR Client - Invalid PSM 2 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Invalid PSM 2 - teardown complete L2CAP BR/EDR Client - Invalid PSM 2 - done
L2CAP BR/EDR Client - Invalid PSM 3 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Invalid PSM 3 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client - Invalid PSM 3 - setup complete L2CAP BR/EDR Client - Invalid PSM 3 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 3 - test passed L2CAP BR/EDR Client - Invalid PSM 3 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Invalid PSM 3 - teardown complete L2CAP BR/EDR Client - Invalid PSM 3 - done
L2CAP BR/EDR Client - Socket Shut WR Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Socket Shut WR Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Socket Shut WR Success - setup complete L2CAP BR/EDR Client - Socket Shut WR Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Socket Shut WR Success - test passed L2CAP BR/EDR Client - Socket Shut WR Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Socket Shut WR Success - teardown complete L2CAP BR/EDR Client - Socket Shut WR Success - done
L2CAP BR/EDR Server - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Success - setup complete
L2CAP BR/EDR Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Success - test passed
Successfully connected
L2CAP BR/EDR Server - Success - test passed
L2CAP BR/EDR Server - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Success - teardown complete
L2CAP BR/EDR Server - Success - done
L2CAP BR/EDR Server - Read Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Read Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Read Success - setup complete L2CAP BR/EDR Server - Read Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Read Success - test passed L2CAP BR/EDR Server - Read Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Read Success - teardown complete L2CAP BR/EDR Server - Read Success - done
L2CAP BR/EDR Server - Write Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Write Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Write Success - setup complete L2CAP BR/EDR Server - Write Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Write Success - test passed L2CAP BR/EDR Server - Write Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Write Success - teardown complete L2CAP BR/EDR Server - Write Success - done
L2CAP BR/EDR Server - Security Block - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Security Block - setup
Powering on controller
Controller powered on
Server enable SSP status 0x00
L2CAP BR/EDR Server - Security Block - setup complete L2CAP BR/EDR Server - Security Block - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Security Block - test passed L2CAP BR/EDR Server - Security Block - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Security Block - teardown complete L2CAP BR/EDR Server - Security Block - done
L2CAP BR/EDR Server - Invalid PSM - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid PSM - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PSM - setup complete L2CAP BR/EDR Server - Invalid PSM - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Invalid PSM - test passed L2CAP BR/EDR Server - Invalid PSM - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid PSM - teardown complete L2CAP BR/EDR Server - Invalid PSM - done
L2CAP BR/EDR Server - Invalid PDU - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid PDU - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PDU - setup complete L2CAP BR/EDR Server - Invalid PDU - run
New client connection with handle 0x002a Sending L2CAP Request from client
Bluetooth: Wrong link type (-71)
Client received response code 0x01
L2CAP BR/EDR Server - Invalid PDU - test passed L2CAP BR/EDR Server - Invalid PDU - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid PDU - teardown complete L2CAP BR/EDR Server - Invalid PDU - done
L2CAP BR/EDR Server - Invalid Disconnect CID - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid Disconnect CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Disconnect CID - setup complete L2CAP BR/EDR Server - Invalid Disconnect CID - run
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Disconnect CID - test passed L2CAP BR/EDR Server - Invalid Disconnect CID - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid Disconnect CID - teardown complete L2CAP BR/EDR Server - Invalid Disconnect CID - done
L2CAP BR/EDR Server - Invalid Config CID - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid Config CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Config CID - setup complete L2CAP BR/EDR Server - Invalid Config CID - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Config CID - test passed L2CAP BR/EDR Server - Invalid Config CID - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid Config CID - teardown complete L2CAP BR/EDR Server - Invalid Config CID - done
L2CAP LE Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Success - setup complete
L2CAP LE Client - Success - run
Connect in progress
Successfully connected
L2CAP LE Client - Success - test passed
L2CAP LE Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Success - teardown complete
L2CAP LE Client - Success - done
L2CAP LE Client, Direct Advertising - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client, Direct Advertising - Success - setup complete L2CAP LE Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP LE Client, Direct Advertising - Success - test passed L2CAP LE Client, Direct Advertising - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client, Direct Advertising - Success - teardown complete L2CAP LE Client, Direct Advertising - Success - done
L2CAP LE Client SMP - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client SMP - Success - setup complete
L2CAP LE Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP LE Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP LE Client SMP - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client SMP - Success - teardown complete
L2CAP LE Client SMP - Success - done
L2CAP LE Client - Command Reject - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Command Reject - setup complete
L2CAP LE Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP LE Client - Command Reject - test passed
L2CAP LE Client - Command Reject - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Command Reject - teardown complete L2CAP LE Client - Command Reject - done
L2CAP LE Client - Connection Reject - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP LE Client - Connection Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Connection Reject - setup complete L2CAP LE Client - Connection Reject - run
Can't connect socket: No route to host (113)
L2CAP LE Client - Connection Reject - test passed L2CAP LE Client - Connection Reject - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Connection Reject - teardown complete L2CAP LE Client - Connection Reject - done
L2CAP LE Client - Close socket 1 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Close socket 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Close socket 1 - setup complete
L2CAP LE Client - Close socket 1 - run
Connect in progress, sk = 19
Will close socket during scan phase...
Checking whether scan was properly stopped...
L2CAP LE Client - Close socket 1 - test passed
L2CAP LE Client - Close socket 1 - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Close socket 1 - teardown complete L2CAP LE Client - Close socket 1 - done
L2CAP LE Client - Close socket 2 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Close socket 2 - setup
Powering on controller
Controller powered on
L2CAP LE Client - Close socket 2 - setup complete
L2CAP LE Client - Close socket 2 - run
Connect in progress, sk = 19
Client set connectable status 0x00
Client set connectable status 0x00
L2CAP LE Client - Close socket 2 - test passed
L2CAP LE Client - Close socket 2 - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Close socket 2 - teardown complete L2CAP LE Client - Close socket 2 - done
L2CAP LE Client - Open two sockets - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets - setup complete L2CAP LE Client - Open two sockets - run
Connect in progress, sk = 19
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 20
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
L2CAP LE Client - Open two sockets - test passed
(l2cap-tester:38): GLib-WARNING **: 22:11:10.996: Invalid file descriptor. L2CAP LE Client - Open two sockets - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Open two sockets - teardown complete L2CAP LE Client - Open two sockets - done
L2CAP LE Client - Open two sockets close one - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets close one - setup complete L2CAP LE Client - Open two sockets close one - run
Connect in progress, sk = 19
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 20
Closing first socket! 19
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP LE Client - Open two sockets close one - test passed
(l2cap-tester:38): GLib-WARNING **: 22:11:11.028: Invalid file descriptor. L2CAP LE Client - Open two sockets close one - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Open two sockets close one - teardown complete L2CAP LE Client - Open two sockets close one - done
L2CAP LE Client - Invalid PSM - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Invalid PSM - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Invalid PSM - setup complete
L2CAP LE Client - Invalid PSM - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP LE Client - Invalid PSM - test passed
L2CAP LE Client - Invalid PSM - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Invalid PSM - teardown complete
L2CAP LE Client - Invalid PSM - done
L2CAP LE Server - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE Server - Success - setup complete
L2CAP LE Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Successfully connected
L2CAP LE Server - Success - test passed
Client received response code 0x15
L2CAP LE Server - Success - test passed
L2CAP LE Server - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Server - Success - teardown complete
L2CAP LE Server - Success - done
L2CAP LE Server - Nval SCID - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Server - Nval SCID - setup
Powering on controller
Controller powered on
L2CAP LE Server - Nval SCID - setup complete
L2CAP LE Server - Nval SCID - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x15
L2CAP LE Server - Nval SCID - test passed
L2CAP LE Server - Nval SCID - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Server - Nval SCID - teardown complete
L2CAP LE Server - Nval SCID - done
L2CAP Ext-Flowctl Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Success - setup complete L2CAP Ext-Flowctl Client - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client - Success - test not run L2CAP Ext-Flowctl Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Success - teardown complete L2CAP Ext-Flowctl Client - Success - done
L2CAP Ext-Flowctl Client, Direct Advertising - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client, Direct Advertising - Success - test not run L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - done
L2CAP Ext-Flowctl Client SMP - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client SMP - Success - setup complete L2CAP Ext-Flowctl Client SMP - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client SMP - Success - test not run L2CAP Ext-Flowctl Client SMP - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client SMP - Success - teardown complete L2CAP Ext-Flowctl Client SMP - Success - done
L2CAP Ext-Flowctl Client - Command Reject - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Command Reject - setup complete L2CAP Ext-Flowctl Client - Command Reject - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client - Command Reject - test not run L2CAP Ext-Flowctl Client - Command Reject - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Command Reject - teardown complete L2CAP Ext-Flowctl Client - Command Reject - done
L2CAP Ext-Flowctl Client - Open two sockets - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets - setup complete L2CAP Ext-Flowctl Client - Open two sockets - run
Can't set mode: Protocol not available (92) Error in create_l2cap_sock
L2CAP Ext-Flowctl Client - Open two sockets - test not run L2CAP Ext-Flowctl Client - Open two sockets - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Open two sockets - teardown complete L2CAP Ext-Flowctl Client - Open two sockets - done
L2CAP Ext-Flowctl Client - Open two sockets close one - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets close one - setup complete L2CAP Ext-Flowctl Client - Open two sockets close one - run
Can't set mode: Protocol not available (92)
Error in create_l2cap_sock
L2CAP Ext-Flowctl Client - Open two sockets close one - test not run L2CAP Ext-Flowctl Client - Open two sockets close one - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Open two sockets close one - teardown complete L2CAP Ext-Flowctl Client - Open two sockets close one - done
L2CAP LE ATT Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE ATT Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE ATT Client - Success - setup complete
L2CAP LE ATT Client - Success - run
Connect in progress
Successfully connected
L2CAP LE ATT Client - Success - test passed
L2CAP LE ATT Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE ATT Client - Success - teardown complete
L2CAP LE ATT Client - Success - done
L2CAP LE ATT Server - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE ATT Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE ATT Server - Success - setup complete
L2CAP LE ATT Server - Success - run
Listening for connections
New client connection with handle 0x002a
Successfully connected
L2CAP LE ATT Server - Success - test passed
L2CAP LE ATT Server - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE ATT Server - Success - teardown complete
L2CAP LE ATT Server - Success - done
Test Summary
------------
Basic L2CAP Socket - Success Passed 0.060 seconds Non-connected getpeername - Failure Passed 0.020 seconds L2CAP BR/EDR Client - Success Passed 0.036 seconds L2CAP BR/EDR Client SSP - Success 1 Passed 0.032 seconds L2CAP BR/EDR Client SSP - Success 2 Passed 0.016 seconds L2CAP BR/EDR Client PIN Code - Success Passed 0.020 seconds L2CAP BR/EDR Client - Read Success Passed 0.012 seconds L2CAP BR/EDR Client - Write Success Passed 0.016 seconds L2CAP BR/EDR Client - Invalid PSM 1 Passed 0.016 seconds L2CAP BR/EDR Client - Invalid PSM 2 Passed 0.016 seconds L2CAP BR/EDR Client - Invalid PSM 3 Passed 0.012 seconds L2CAP BR/EDR Client - Socket Shut WR Success Passed 0.016 seconds L2CAP BR/EDR Server - Success Passed 0.020 seconds L2CAP BR/EDR Server - Read Success Passed 0.020 seconds L2CAP BR/EDR Server - Write Success Passed 0.012 seconds L2CAP BR/EDR Server - Security Block Passed 0.020 seconds L2CAP BR/EDR Server - Invalid PSM Passed 0.016 seconds L2CAP BR/EDR Server - Invalid PDU Passed 0.020 seconds L2CAP BR/EDR Server - Invalid Disconnect CID Passed 0.020 seconds L2CAP BR/EDR Server - Invalid Config CID Passed 0.020 seconds L2CAP LE Client - Success Passed 0.028 seconds L2CAP LE Client, Direct Advertising - Success Passed 0.020 seconds L2CAP LE Client SMP - Success Passed 0.032 seconds L2CAP LE Client - Command Reject Passed 0.012 seconds L2CAP LE Client - Connection Reject Passed 0.020 seconds L2CAP LE Client - Close socket 1 Passed 0.016 seconds L2CAP LE Client - Close socket 2 Passed 0.016 seconds L2CAP LE Client - Open two sockets Passed 0.044 seconds L2CAP LE Client - Open two sockets close one Passed 0.020 seconds L2CAP LE Client - Invalid PSM Passed 0.016 seconds L2CAP LE Server - Success Passed 0.016 seconds L2CAP LE Server - Nval SCID Passed 0.016 seconds L2CAP Ext-Flowctl Client - Success Not Run L2CAP Ext-Flowctl Client, Direct Advertising - Success Not Run L2CAP Ext-Flowctl Client SMP - Success Not Run L2CAP Ext-Flowctl Client - Command Reject Not Run L2CAP Ext-Flowctl Client - Open two sockets Not Run L2CAP Ext-Flowctl Client - Open two sockets close one Not Run L2CAP LE ATT Client - Success Passed 0.024 seconds L2CAP LE ATT Server - Success Passed 0.016 seconds
Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6 Overall execution time: 0.852 seconds Process 38 exited with status 0
reboot: Restarting system
c[?7l[2JSeaBIOS (version 1.13.0-1ubuntu1) Booting from ROM..c[?7l[2Jearly console in extract_kernelinput_data: 0x0000000001e782e0input_len: 0x000000000034efe0
output: 0x0000000001000000output_len: 0x0000000001195364kernel_total_size: 0x000000000102c000needed_size: 0x0000000001200000trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.10.0-g34e646f46868 (root@0a141ac9fc74) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Mon Dec 21 22:11:02 UTC 2020
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/bnep-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/bnep-tester
New process 38 created
Changing into directory /github/workspace
Basic BNEP Socket - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Basic BNEP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic BNEP Socket - Success - setup complete
Basic BNEP Socket - Success - run
Basic BNEP Socket - Success - test passed
Basic BNEP Socket - Success - teardown
Index Removed callback
Index: 0x0000
Basic BNEP Socket - Success - teardown complete
Basic BNEP Socket - Success - done
Test Summary
------------
Basic BNEP Socket - Success Passed 0.052 seconds
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.06 seconds Process 38 exited with status 0
reboot: Restarting system
c[?7l[2JSeaBIOS (version 1.13.0-1ubuntu1) Booting from ROM..c[?7l[2Jearly console in extract_kernelinput_data: 0x0000000001e782e0input_len: 0x000000000034efe0
output: 0x0000000001000000output_len: 0x0000000001195364kernel_total_size: 0x000000000102c000needed_size: 0x0000000001200000trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.10.0-g34e646f46868 (root@0a141ac9fc74) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Mon Dec 21 22:11:02 UTC 2020
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/mgmt-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/mgmt-tester
Changing into directory /github/workspace
New process 38 created
Controller setup - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Controller setup - setup
Controller setup - setup complete
Controller setup - run
Controller setup - test passed
Controller setup - teardown
Index Removed callback
Index: 0x0000
Controller setup - teardown complete
Controller setup - done
Controller setup (BR/EDR-only) - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Controller setup (BR/EDR-only) - setup
Controller setup (BR/EDR-only) - setup complete
Controller setup (BR/EDR-only) - run
Controller setup (BR/EDR-only) - test passed
Controller setup (BR/EDR-only) - teardown
Index Removed callback
Index: 0x0000
Controller setup (BR/EDR-only) - teardown complete Controller setup (BR/EDR-only) - done
Controller setup (LE) - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Controller setup (LE) - setup
Controller setup (LE) - setup complete
Controller setup (LE) - run
Controller setup (LE) - test passed
Controller setup (LE) - teardown
Index Removed callback
Index: 0x0000
Controller setup (LE) - teardown complete
Controller setup (LE) - done
Invalid command - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Invalid command - setup
Invalid command - setup complete
Invalid command - run
Sending <unknown opcode> (0xffff)
Test condition added, total 1
<unknown opcode> (0xffff): Unknown Command (0x01) Test condition complete, 0 left
Invalid command - test passed
Invalid command - teardown
Index Removed callback
Index: 0x0000
Invalid command - teardown complete
Invalid command - done
Read version - Success - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read version - Success - setup
Read version - Success - setup complete
Read version - Success - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Success (0x00)
Test condition complete, 0 left
Read version - Success - test passed
Read version - Success - teardown
Index Removed callback
Index: 0x0000
Read version - Success - teardown complete
Read version - Success - done
Read version - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read version - Invalid parameters - setup Read version - Invalid parameters - setup complete Read version - Invalid parameters - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Parameters (0x0d) Test condition complete, 0 left
Read version - Invalid parameters - test passed Read version - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read version - Invalid parameters - teardown complete Read version - Invalid parameters - done
Read version - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read version - Invalid index - setup
Read version - Invalid index - setup complete
Read version - Invalid index - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Index (0x11)
Test condition complete, 0 left
Read version - Invalid index - test passed
Read version - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read version - Invalid index - teardown complete
Read version - Invalid index - done
Read commands - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read commands - Invalid parameters - setup Read commands - Invalid parameters - setup complete Read commands - Invalid parameters - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Parameters (0x0d) Test condition complete, 0 left
Read commands - Invalid parameters - test passed Read commands - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read commands - Invalid parameters - teardown complete Read commands - Invalid parameters - done
Read commands - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read commands - Invalid index - setup
Read commands - Invalid index - setup complete
Read commands - Invalid index - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Index (0x11)
Test condition complete, 0 left
Read commands - Invalid index - test passed
Read commands - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read commands - Invalid index - teardown complete
Read commands - Invalid index - done
Read index list - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read index list - Invalid parameters - setup Read index list - Invalid parameters - setup complete Read index list - Invalid parameters - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Parameters (0x0d) Test condition complete, 0 left
Read index list - Invalid parameters - test passed Read index list - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read index list - Invalid parameters - teardown complete Read index list - Invalid parameters - done
Read index list - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read index list - Invalid index - setup
Read index list - Invalid index - setup complete
Read index list - Invalid index - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Index (0x11)
Test condition complete, 0 left
Read index list - Invalid index - test passed
Read index list - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read index list - Invalid index - teardown complete Read index list - Invalid index - done
Read info - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read info - Invalid parameters - setup
Read info - Invalid parameters - setup complete Read info - Invalid parameters - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Parameters (0x0d) Test condition complete, 0 left
Read info - Invalid parameters - test passed
Read info - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read info - Invalid parameters - teardown complete Read info - Invalid parameters - done
Read info - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read info - Invalid index - setup
Read info - Invalid index - setup complete Read info - Invalid index - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Index (0x11) Test condition complete, 0 left
Read info - Invalid index - test passed
Read info - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read info - Invalid index - teardown complete
Read info - Invalid index - done
Read unconfigured index list - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read unconfigured index list - Invalid parameters - setup Read unconfigured index list - Invalid parameters - setup complete Read unconfigured index list - Invalid parameters - run
Sending Read Unconfigured Index List (0x0036)
Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Parameters (0x0d) Test condition complete, 0 left
Read unconfigured index list - Invalid parameters - test passed Read unconfigured index list - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read unconfigured index list - Invalid parameters - teardown complete Read unconfigured index list - Invalid parameters - done
Read unconfigured index list - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read unconfigured index list - Invalid index - setup Read unconfigured index list - Invalid index - setup complete Read unconfigured index list - Invalid index - run
Sending Read Unconfigured Index List (0x0036) Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Index (0x11) Test condition complete, 0 left
Read unconfigured index list - Invalid index - test passed Read unconfigured index list - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read unconfigured index list - Invalid index - teardown complete Read unconfigured index list - Invalid index - done
Read configuration info - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read configuration info - Invalid parameters - setup
Read configuration info - Invalid parameters - setup complete
Read configuration info - Invalid parameters - run
Sending Read Controller Configuration Information (0x0037)
Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Parameters (0x0d) Test condition complete, 0 left
Read configuration info - Invalid parameters - test passed
Read configuration info - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read configuration info - Invalid parameters - teardown complete Read configuration info - Invalid parameters - done
Read configuration info - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read configuration info - Invalid index - setup
Read configuration info - Invalid index - setup complete
Read configuration info - Invalid index - run
Sending Read Controller Configuration Information (0x0037) Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Index (0x11) Test condition complete, 0 left
Read configuration info - Invalid index - test passed
Read configuration info - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read configuration info - Invalid index - teardown complete Read configuration info - Invalid index - done
Read extended index list - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read extended index list - Invalid parameters - setup
Read extended index list - Invalid parameters - setup complete Read extended index list - Invalid parameters - run
Sending Read Extended Controller Index List (0x003c)
Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Parameters (0x0d) Test condition complete, 0 left
Read extended index list - Invalid parameters - test passed Read extended index list - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read extended index list - Invalid parameters - teardown complete Read extended index list - Invalid parameters - done
Read extended index list - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read extended index list - Invalid index - setup
Read extended index list - Invalid index - setup complete Read extended index list - Invalid index - run
Sending Read Extended Controller Index List (0x003c) Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Index (0x11) Test condition complete, 0 left
Read extended index list - Invalid index - test passed Read extended index list - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read extended index list - Invalid index - teardown complete Read extended index list - Invalid index - done
Set powered on - Success - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Success - setup
Set powered on - Success - setup complete
Set powered on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered on - Success - test passed
Set powered on - Success - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set powered on - Success - teardown complete
Set powered on - Success - done
Set powered on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid parameters 1 - setup Set powered on - Invalid parameters 1 - setup complete Set powered on - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 1 - test passed Set powered on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid parameters 1 - teardown complete Set powered on - Invalid parameters 1 - done
Set powered on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid parameters 2 - setup Set powered on - Invalid parameters 2 - setup complete Set powered on - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 2 - test passed Set powered on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid parameters 2 - teardown complete Set powered on - Invalid parameters 2 - done
Set powered on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid parameters 3 - setup Set powered on - Invalid parameters 3 - setup complete Set powered on - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 3 - test passed Set powered on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid parameters 3 - teardown complete Set powered on - Invalid parameters 3 - done
Set powered on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid index - setup
Set powered on - Invalid index - setup complete
Set powered on - Invalid index - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Index (0x11)
Test condition complete, 0 left
Set powered on - Invalid index - test passed
Set powered on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid index - teardown complete Set powered on - Invalid index - done
Set powered on - Privacy and Advertising - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set powered on - Privacy and Advertising - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered on - Privacy and Advertising - setup complete Set powered on - Privacy and Advertising - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Success (0x00)
Test condition complete, 0 left
Set powered on - Privacy and Advertising - test passed Set powered on - Privacy and Advertising - teardown
Index Removed callback
Index: 0x0000
Set powered on - Privacy and Advertising - teardown complete Set powered on - Privacy and Advertising - done
Set powered off - Success - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Success - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Success - setup complete
Set powered off - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered off - Success - test passed
Set powered off - Success - teardown
Index Removed callback
Index: 0x0000
Set powered off - Success - teardown complete
Set powered off - Success - done
Set powered off - Class of Device - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Class of Device - setup
Setting device class and powering on Controller powered on
Client set connectable: Success (0x00)
Set powered off - Class of Device - setup complete Set powered off - Class of Device - run
Registering new settings notification Test condition added, total 1 Registering Class of Device Changed notification Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
Set Powered (0x0005): Success (0x00) Test condition complete, 2 left
New Class of Device Changed event received Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set powered off - Class of Device - test passed Set powered off - Class of Device - teardown
Index Removed callback
Index: 0x0000
Set powered off - Class of Device - teardown complete Set powered off - Class of Device - done
Set powered off - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Invalid parameters 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 1 - setup complete Set powered off - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 1 - test passed Set powered off - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set powered off - Invalid parameters 1 - teardown complete Set powered off - Invalid parameters 1 - done
Set powered off - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Invalid parameters 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 2 - setup complete Set powered off - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 2 - test passed Set powered off - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set powered off - Invalid parameters 2 - teardown complete Set powered off - Invalid parameters 2 - done
Set powered off - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Invalid parameters 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 3 - setup complete Set powered off - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 3 - test passed Set powered off - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set powered off - Invalid parameters 3 - teardown complete Set powered off - Invalid parameters 3 - done
Set connectable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Success 1 - setup
Set connectable on - Success 1 - setup complete
Set connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000082 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 1 - test passed
Set connectable on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Success 1 - teardown complete Set connectable on - Success 1 - done
Set connectable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on - Success 2 - setup complete
Set connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000083 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 2 - test passed
Set connectable on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable on - Success 2 - teardown complete Set connectable on - Success 2 - done
Set connectable on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid parameters 1 - setup Set connectable on - Invalid parameters 1 - setup complete Set connectable on - Invalid parameters 1 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 1 - test passed Set connectable on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid parameters 1 - teardown complete Set connectable on - Invalid parameters 1 - done
Set connectable on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid parameters 2 - setup Set connectable on - Invalid parameters 2 - setup complete Set connectable on - Invalid parameters 2 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 2 - test passed Set connectable on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid parameters 2 - teardown complete Set connectable on - Invalid parameters 2 - done
Set connectable on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid parameters 3 - setup Set connectable on - Invalid parameters 3 - setup complete Set connectable on - Invalid parameters 3 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 3 - test passed Set connectable on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid parameters 3 - teardown complete Set connectable on - Invalid parameters 3 - done
Set connectable on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid index - setup Set connectable on - Invalid index - setup complete Set connectable on - Invalid index - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Index (0x11) Test condition complete, 0 left
Set connectable on - Invalid index - test passed Set connectable on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid index - teardown complete Set connectable on - Invalid index - done
Set connectable on (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable on (LE) - Success 1 - setup Set connectable on (LE) - Success 1 - setup complete Set connectable on (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000202 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 1 - test passed Set connectable on (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable on (LE) - Success 1 - teardown complete Set connectable on (LE) - Success 1 - done
Set connectable on (LE) - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable on (LE) - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on (LE) - Success 2 - setup complete Set connectable on (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000203 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 2 - test passed Set connectable on (LE) - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable on (LE) - Success 2 - teardown complete Set connectable on (LE) - Success 2 - done
Set connectable on (LE) - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable on (LE) - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on (LE) - Success 3 - setup complete Set connectable on (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000603 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 3 - test passed Set connectable on (LE) - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable on (LE) - Success 3 - teardown complete Set connectable on (LE) - Success 3 - done
Set connectable off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 1 - setup complete
Set connectable off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 1 - test passed
Set connectable off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable off - Success 1 - teardown complete Set connectable off - Success 1 - done
Set connectable off - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 2 - setup complete
Set connectable off - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 2 - test passed
Set connectable off - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off - Success 2 - teardown complete Set connectable off - Success 2 - done
Set connectable off - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 3 - setup complete
Set connectable off - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 3 - test passed
Set connectable off - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off - Success 3 - teardown complete Set connectable off - Success 3 - done
Set connectable off - Success 4 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 4 - setup
Initial settings completed
Powering on controller (with added device)
Controller powered on
Client set connectable: Success (0x00)
Set connectable off - Success 4 - setup complete
Set connectable off - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 4 - test passed
Set connectable off - Success 4 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off - Success 4 - teardown complete Set connectable off - Success 4 - done
Set connectable off (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 1 - setup complete Set connectable off (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000200 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 1 - test passed Set connectable off (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 1 - teardown complete Set connectable off (LE) - Success 1 - done
Set connectable off (LE) - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 2 - setup complete Set connectable off (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 2 - test passed Set connectable off (LE) - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 2 - teardown complete Set connectable off (LE) - Success 2 - done
Set connectable off (LE) - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 3 - setup complete Set connectable off (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 3 - test passed Set connectable off (LE) - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 3 - teardown complete Set connectable off (LE) - Success 3 - done
Set connectable off (LE) - Success 4 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 4 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 4 - setup complete Set connectable off (LE) - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 4 - test passed Set connectable off (LE) - Success 4 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 4 - teardown complete Set connectable off (LE) - Success 4 - done
Set fast connectable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Success 1 - setup complete Set fast connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000087 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 1 - test passed Set fast connectable on - Success 1 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set fast connectable on - Success 1 - teardown complete Set fast connectable on - Success 1 - done
Set fast connectable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Success 2 - setup complete Set fast connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000085 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 2 - test passed Set fast connectable on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set fast connectable on - Success 2 - teardown complete Set fast connectable on - Success 2 - done
Set fast connectable on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Success 3 - setup Set fast connectable on - Success 3 - setup complete Set fast connectable on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000084 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 3 - test passed Set fast connectable on - Success 3 - teardown
Index Removed callback
Index: 0x0000
Set fast connectable on - Success 3 - teardown complete Set fast connectable on - Success 3 - done
Set fast connectable on - Invalid Params 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Invalid Params 1 - setup Set fast connectable on - Invalid Params 1 - setup complete Set fast connectable on - Invalid Params 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Invalid Parameters (0x0d) Test condition complete, 0 left
Set fast connectable on - Invalid Params 1 - test passed Set fast connectable on - Invalid Params 1 - teardown
Index Removed callback
Index: 0x0000
Set fast connectable on - Invalid Params 1 - teardown complete Set fast connectable on - Invalid Params 1 - done
Set fast connectable on - Not Supported 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set fast connectable on - Not Supported 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Not Supported 1 - setup complete Set fast connectable on - Not Supported 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Not Supported (0x0c) Test condition complete, 0 left
Set fast connectable on - Not Supported 1 - test passed Set fast connectable on - Not Supported 1 - teardown
Index Removed callback
Index: 0x0000
Set fast connectable on - Not Supported 1 - teardown complete Set fast connectable on - Not Supported 1 - done
Set bondable on - Success - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Success - setup
Set bondable on - Success - setup complete
Set bondable on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Bondable (0x0009)
Test condition added, total 2
Set Bondable (0x0009): Success (0x00)
Test condition complete, 1 left
New settings 0x00000090 received
Unregistering new settings notification
Test condition complete, 0 left
Set bondable on - Success - test passed
Set bondable on - Success - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Success - teardown complete
Set bondable on - Success - done
Set bondable on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid parameters 1 - setup Set bondable on - Invalid parameters 1 - setup complete Set bondable on - Invalid parameters 1 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 1 - test passed Set bondable on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid parameters 1 - teardown complete Set bondable on - Invalid parameters 1 - done
Set bondable on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid parameters 2 - setup Set bondable on - Invalid parameters 2 - setup complete Set bondable on - Invalid parameters 2 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 2 - test passed Set bondable on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid parameters 2 - teardown complete Set bondable on - Invalid parameters 2 - done
Set bondable on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid parameters 3 - setup Set bondable on - Invalid parameters 3 - setup complete Set bondable on - Invalid parameters 3 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 3 - test passed Set bondable on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid parameters 3 - teardown complete Set bondable on - Invalid parameters 3 - done
Set bondable on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid index - setup
Set bondable on - Invalid index - setup complete
Set bondable on - Invalid index - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Index (0x11)
Test condition complete, 0 left
Set bondable on - Invalid index - test passed
Set bondable on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid index - teardown complete Set bondable on - Invalid index - done
Set discoverable on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 1 - setup Set discoverable on - Invalid parameters 1 - setup complete Set discoverable on - Invalid parameters 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 1 - test passed Set discoverable on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 1 - teardown complete Set discoverable on - Invalid parameters 1 - done
Set discoverable on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 2 - setup Set discoverable on - Invalid parameters 2 - setup complete Set discoverable on - Invalid parameters 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 2 - test passed Set discoverable on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 2 - teardown complete Set discoverable on - Invalid parameters 2 - done
Set discoverable on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 3 - setup Set discoverable on - Invalid parameters 3 - setup complete Set discoverable on - Invalid parameters 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 3 - test passed Set discoverable on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 3 - teardown complete Set discoverable on - Invalid parameters 3 - done
Set discoverable on - Invalid parameters 4 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 4 - setup Set discoverable on - Invalid parameters 4 - setup complete Set discoverable on - Invalid parameters 4 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 4 - test passed Set discoverable on - Invalid parameters 4 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 4 - teardown complete Set discoverable on - Invalid parameters 4 - done
Set discoverable on - Not powered 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Not powered 1 - setup Set discoverable on - Not powered 1 - setup complete Set discoverable on - Not powered 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 1 - test passed Set discoverable on - Not powered 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Not powered 1 - teardown complete Set discoverable on - Not powered 1 - done
Set discoverable on - Not powered 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Not powered 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Not powered 2 - setup complete Set discoverable on - Not powered 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 2 - test passed Set discoverable on - Not powered 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Not powered 2 - teardown complete Set discoverable on - Not powered 2 - done
Set discoverable on - Rejected 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Rejected 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 1 - setup complete
Set discoverable on - Rejected 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 1 - test passed
Set discoverable on - Rejected 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Rejected 1 - teardown complete Set discoverable on - Rejected 1 - done
Set discoverable on - Rejected 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Rejected 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 2 - setup complete
Set discoverable on - Rejected 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 2 - test passed
Set discoverable on - Rejected 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Rejected 2 - teardown complete Set discoverable on - Rejected 2 - done
Set discoverable on - Rejected 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Rejected 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 3 - setup complete
Set discoverable on - Rejected 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 3 - test passed
Set discoverable on - Rejected 3 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Rejected 3 - teardown complete Set discoverable on - Rejected 3 - done
Set discoverable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Success 1 - setup complete
Set discoverable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008a received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 1 - test passed
Set discoverable on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Success 1 - teardown complete Set discoverable on - Success 1 - done
Set discoverable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Success 2 - setup complete
Set discoverable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Discoverable (0x0006)
Test condition added, total 3
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008b received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 2 - test passed
Set discoverable on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set discoverable on - Success 2 - teardown complete Set discoverable on - Success 2 - done
Set discoverable on (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set discoverable on (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on (LE) - Success 1 - setup complete Set discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set discoverable on (LE) - Success 1 - test passed Set discoverable on (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on (LE) - Success 1 - teardown complete Set discoverable on (LE) - Success 1 - done
Set discoverable off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable off - Success 1 - setup complete
Set discoverable off - Success 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 1 - test passed
Set discoverable off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable off - Success 1 - teardown complete Set discoverable off - Success 1 - done
Set discoverable off - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable off - Success 2 - setup complete
Set discoverable off - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c1a length 1
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 2 - test passed
Set discoverable off - Success 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable off - Success 2 - teardown complete Set discoverable off - Success 2 - done
Set limited discoverable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set limited discoverable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 1 - setup complete Set limited discoverable on - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 1 left
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 1 - test passed Set limited discoverable on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on - Success 1 - teardown complete Set limited discoverable on - Success 1 - done
Set limited discoverable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set limited discoverable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 2 - setup complete Set limited discoverable on - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
Test condition complete, 1 left
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 2 - test passed Set limited discoverable on - Success 2 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on - Success 2 - teardown complete Set limited discoverable on - Success 2 - done
Set limited discoverable on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set limited discoverable on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 3 - setup complete Set limited discoverable on - Success 3 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 3 - test passed Set limited discoverable on - Success 3 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on - Success 3 - teardown complete Set limited discoverable on - Success 3 - done
Set limited discoverable on (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set limited discoverable on (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on (LE) - Success 1 - setup complete Set limited discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - test passed Set limited discoverable on (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on (LE) - Success 1 - teardown complete Set limited discoverable on (LE) - Success 1 - done
Set link security on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Success 1 - setup
Set link security on - Success 1 - setup complete
Set link security on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a0 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 1 - test passed
Set link security on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Success 1 - teardown complete Set link security on - Success 1 - done
Set link security on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security on - Success 2 - setup complete
Set link security on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 2 - test passed
Set link security on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set link security on - Success 2 - teardown complete Set link security on - Success 2 - done
Set link security on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security on - Success 3 - setup complete
Set link security on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 3 - test passed
Set link security on - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set link security on - Success 3 - teardown complete Set link security on - Success 3 - done
Set link security on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid parameters 1 - setup Set link security on - Invalid parameters 1 - setup complete Set link security on - Invalid parameters 1 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 1 - test passed Set link security on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid parameters 1 - teardown complete Set link security on - Invalid parameters 1 - done
Set link security on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid parameters 2 - setup Set link security on - Invalid parameters 2 - setup complete Set link security on - Invalid parameters 2 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 2 - test passed Set link security on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid parameters 2 - teardown complete Set link security on - Invalid parameters 2 - done
Set link security on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid parameters 3 - setup Set link security on - Invalid parameters 3 - setup complete Set link security on - Invalid parameters 3 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 3 - test passed Set link security on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid parameters 3 - teardown complete Set link security on - Invalid parameters 3 - done
Set link security on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid index - setup Set link security on - Invalid index - setup complete Set link security on - Invalid index - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Index (0x11) Test condition complete, 0 left
Set link security on - Invalid index - test passed Set link security on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid index - teardown complete Set link security on - Invalid index - done
Set link security off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security off - Success 1 - setup complete Set link security off - Success 1 - run
Registering new settings notification Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 1 - test passed Set link security off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set link security off - Success 1 - teardown complete Set link security off - Success 1 - done
Set link security off - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security off - Success 2 - setup complete Set link security off - Success 2 - run
Registering new settings notification Test condition added, total 1 Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000081 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 2 - test passed Set link security off - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set link security off - Success 2 - teardown complete Set link security off - Success 2 - done
Set SSP on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Success 1 - setup
Set SSP on - Success 1 - setup complete
Set SSP on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 2
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c0 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 1 - test passed
Set SSP on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Success 1 - teardown complete
Set SSP on - Success 1 - done
Set SSP on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set SSP on - Success 2 - setup complete
Set SSP on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c1 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 2 - test passed
HCI Command 0x0c52 length 241
Set SSP on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set SSP on - Success 2 - teardown complete
Set SSP on - Success 2 - done
Set SSP on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set SSP on - Success 3 - setup complete
Set SSP on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
HCI Command 0x0c52 length 241
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set SSP on - Success 3 - test passed
Set SSP on - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set SSP on - Success 3 - teardown complete
Set SSP on - Success 3 - done
Set SSP on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid parameters 1 - setup
Set SSP on - Invalid parameters 1 - setup complete Set SSP on - Invalid parameters 1 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 1 - test passed
Set SSP on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid parameters 1 - teardown complete Set SSP on - Invalid parameters 1 - done
Set SSP on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid parameters 2 - setup
Set SSP on - Invalid parameters 2 - setup complete Set SSP on - Invalid parameters 2 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 2 - test passed
Set SSP on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid parameters 2 - teardown complete Set SSP on - Invalid parameters 2 - done
Set SSP on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid parameters 3 - setup
Set SSP on - Invalid parameters 3 - setup complete Set SSP on - Invalid parameters 3 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 3 - test passed
Set SSP on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid parameters 3 - teardown complete Set SSP on - Invalid parameters 3 - done
Set SSP on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid index - setup
Set SSP on - Invalid index - setup complete
Set SSP on - Invalid index - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Index (0x11) Test condition complete, 0 left
Set SSP on - Invalid index - test passed
Set SSP on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid index - teardown complete
Set SSP on - Invalid index - done
Set Secure Connections on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Success 1 - setup complete Set Secure Connections on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d) Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 1 - test passed Set Secure Connections on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Success 1 - teardown complete Set Secure Connections on - Success 1 - done
Set Secure Connections on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Success 2 - setup complete Set Secure Connections on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d) Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 2 - test passed Set Secure Connections on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Secure Connections on - Success 2 - teardown complete Set Secure Connections on - Success 2 - done
Set Secure Connections on - Invalid params 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid params 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 1 - setup complete Set Secure Connections on - Invalid params 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 1 - test passed Set Secure Connections on - Invalid params 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid params 1 - teardown complete Set Secure Connections on - Invalid params 1 - done
Set Secure Connections on - Invalid params 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid params 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 2 - setup complete Set Secure Connections on - Invalid params 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 2 - test passed Set Secure Connections on - Invalid params 2 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid params 2 - teardown complete Set Secure Connections on - Invalid params 2 - done
Set Secure Connections on - Invalid params 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid params 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 3 - setup complete Set Secure Connections on - Invalid params 3 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 3 - test passed Set Secure Connections on - Invalid params 3 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid params 3 - teardown complete Set Secure Connections on - Invalid params 3 - done
Set Secure Connections on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid index - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid index - setup complete Set Secure Connections on - Invalid index - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Index (0x11) Test condition complete, 0 left
Set Secure Connections on - Invalid index - test passed Set Secure Connections on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid index - teardown complete Set Secure Connections on - Invalid index - done
Set Secure Connections on - Not supported 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Not supported 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Not supported 1 - setup complete Set Secure Connections on - Not supported 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 1 - test passed Set Secure Connections on - Not supported 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Not supported 1 - teardown complete Set Secure Connections on - Not supported 1 - done
Set Secure Connections on - Not supported 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000110ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Not supported 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Not supported 2 - setup complete Set Secure Connections on - Not supported 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 2 - test passed Set Secure Connections on - Not supported 2 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Not supported 2 - teardown complete Set Secure Connections on - Not supported 2 - done
Set Secure Connections Only on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections Only on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections Only on - Success 1 - setup complete Set Secure Connections Only on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d)
Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 1 - test passed Set Secure Connections Only on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections Only on - Success 1 - teardown complete Set Secure Connections Only on - Success 1 - done
Set Secure Connections Only on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections Only on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections Only on - Success 2 - setup complete Set Secure Connections Only on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d)
Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 2 - test passed Set Secure Connections Only on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Secure Connections Only on - Success 2 - teardown complete Set Secure Connections Only on - Success 2 - done
Set High Speed on - Success - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Success - pre setup failed
Index Removed callback
Index: 0x0000
Set High Speed on - Success - done
Set High Speed on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 1 - pre setup failed
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid parameters 1 - done
Set High Speed on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 2 - pre setup failed
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid parameters 2 - done
Set High Speed on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 3 - pre setup failed
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid parameters 3 - done
Set High Speed on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid index - pre setup failed
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid index - done
Set Low Energy on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Success 1 - setup
Set Low Energy on - Success 1 - setup complete
Set Low Energy on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Low Energy (0x000d)
Test condition added, total 2
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 1 - test passed
Set Low Energy on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Success 1 - teardown complete
Set Low Energy on - Success 1 - done
Set Low Energy on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Low Energy on - Success 2 - setup complete
Set Low Energy on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Low Energy (0x000d)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 2 - test passed
HCI Command 0x2008 length 32
Set Low Energy on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Low Energy on - Success 2 - teardown complete
Set Low Energy on - Success 2 - done
Set Low Energy on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Low Energy on - Success 3 - setup complete
Set Low Energy on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
HCI Command 0x2008 length 32
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 3 - test passed
Set Low Energy on - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Low Energy on - Success 3 - teardown complete
Set Low Energy on - Success 3 - done
Set Low Energy on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid parameters 1 - setup Set Low Energy on - Invalid parameters 1 - setup complete Set Low Energy on - Invalid parameters 1 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 1 - test passed Set Low Energy on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid parameters 1 - teardown complete Set Low Energy on - Invalid parameters 1 - done
Set Low Energy on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid parameters 2 - setup Set Low Energy on - Invalid parameters 2 - setup complete Set Low Energy on - Invalid parameters 2 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 2 - test passed Set Low Energy on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid parameters 2 - teardown complete Set Low Energy on - Invalid parameters 2 - done
Set Low Energy on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid parameters 3 - setup Set Low Energy on - Invalid parameters 3 - setup complete Set Low Energy on - Invalid parameters 3 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 3 - test passed Set Low Energy on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid parameters 3 - teardown complete Set Low Energy on - Invalid parameters 3 - done
Set Low Energy on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid index - setup Set Low Energy on - Invalid index - setup complete Set Low Energy on - Invalid index - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Index (0x11) Test condition complete, 0 left
Set Low Energy on - Invalid index - test passed Set Low Energy on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid index - teardown complete Set Low Energy on - Invalid index - done
Set Advertising on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Advertising on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Success 1 - setup complete
Set Advertising on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000680 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 1 - test passed
Set Advertising on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Advertising on - Success 1 - teardown complete Set Advertising on - Success 1 - done
Set Advertising on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Advertising on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Success 2 - setup complete
Set Advertising on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Advertising (0x0029)
Test condition added, total 3
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Test condition complete, 2 left
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000681 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 2 - test passed
Set Advertising on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Advertising on - Success 2 - teardown complete Set Advertising on - Success 2 - done
Set Advertising on - Rejected 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Advertising on - Rejected 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Rejected 1 - setup complete
Set Advertising on - Rejected 1 - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Rejected (0x0b)
Test condition complete, 0 left
Set Advertising on - Rejected 1 - test passed
Set Advertising on - Rejected 1 - teardown
Index Removed callback
Index: 0x0000
Set Advertising on - Rejected 1 - teardown complete Set Advertising on - Rejected 1 - done
Set Advertising on - Appearance 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Advertising on - Appearance 1 - setup
Initial settings completed
Setup sending Set Appearance (0x0043) Test setup condition added, total 1
Test setup condition complete, 0 left
Set Advertising on - Appearance 1 - setup complete Set Advertising on - Appearance 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Appearance 1 - test passed Set Advertising on - Appearance 1 - teardown
Index Removed callback
Index: 0x0000
Set Advertising on - Appearance 1 - teardown complete Set Advertising on - Appearance 1 - done
Set Advertising on - Local name 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Advertising on - Local name 1 - setup
Initial settings completed
Setup sending Set Local Name (0x000f) Test setup condition added, total 1
Test setup condition complete, 0 left
Set Advertising on - Local name 1 - setup complete Set Advertising on - Local name 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Local name 1 - test passed Set Advertising on - Local name 1 - teardown
Index Removed callback
Index: 0x0000
Set Advertising on - Local name 1 - teardown complete Set Advertising on - Local name 1 - done
Set Advertising on - Name + Appear 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Advertising on - Name + Appear 1 - setup
Initial settings completed
Sending setup opcode array
Setup sending Set Appearance (0x0043)
Test setup condition added, total 1
Setup sending Set Local Name (0x000f)
Test setup condition added, total 2
Test setup condition complete, 1 left
Test setup condition complete, 0 left
Set Advertising on - Name + Appear 1 - setup complete Set Advertising on - Name + Appear 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Name + Appear 1 - test passed Set Advertising on - Name + Appear 1 - teardown
Index Removed callback
Index: 0x0000
Set Advertising on - Name + Appear 1 - teardown complete Set Advertising on - Name + Appear 1 - done
Set BR/EDR off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set BR/EDR off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set BR/EDR off - Success 1 - setup complete
Set BR/EDR off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set BR/EDR (0x002a)
Test condition added, total 2
Set BR/EDR (0x002a): Success (0x00)
Test condition complete, 1 left
New settings 0x00000200 received
Unregistering new settings notification
Test condition complete, 0 left
Set BR/EDR off - Success 1 - test passed
Set BR/EDR off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set BR/EDR off - Success 1 - teardown complete
Set BR/EDR off - Success 1 - done
Set BR/EDR on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001beff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set BR/EDR on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set BR/EDR on - Success 1 - setup complete
Set BR/EDR on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set BR/EDR (0x002a)
Test condition added, total 2
Set BR/EDR (0x002a): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set BR/EDR on - Success 1 - test passed
Set BR/EDR on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set BR/EDR on - Success 1 - teardown complete
Set BR/EDR on - Success 1 - done
Set BR/EDR on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.19
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f5 lines not shown · raw message
13,146 lines not shown · raw message
Part of this message is not shown here. View the raw message.