Skip to contentSkip to conversation

Bluetooth: Add initial implementation of CIS connections

PATCH In review Luiz Augusto von Dentz 3 participants 5 messages Dec 21, 2020 – Dec 29, 2020

Subsystems (2)
lore
Share & tools
lore

Luiz Augusto von Dentz

author maintainer
#0 lore raw

PATCH 1/3 Bluetooth: Add initial implementation of CIS connections

From: Luiz Augusto von Dentz <[email protected]>

This adds the initial implementation of CIS connections and introduces the ISO packets/links along with is enabled with use CONFIG_BT_ISO Kconfig option.

---
 include/net/bluetooth/bluetooth.h |  33 +++-
 include/net/bluetooth/hci.h       |  19 ++
 include/net/bluetooth/hci_core.h  |  84 ++++++++-
 include/net/bluetooth/hci_sock.h  |   2 +
 net/bluetooth/Kconfig             |   9 +
 net/bluetooth/af_bluetooth.c      |   4 +-
 net/bluetooth/hci_conn.c          | 286 ++++++++++++++++++++++++++++++
 net/bluetooth/hci_core.c          | 261 ++++++++++++++++++++++-----
 net/bluetooth/hci_event.c         | 242 +++++++++++++++++++++++++
 9 files changed, 888 insertions(+), 52 deletions(-)
include/net/bluetooth/bluetooth.h +32 -1
index 9125effbf448..26ae85bdc589 100644
@@ -55,6 +55,8 @@
 #define BTPROTO_CMTP	5
 #define BTPROTO_HIDP	6
 #define BTPROTO_AVDTP	7
+#define BTPROTO_ISO	8
+#define BTPROTO_LAST	BTPROTO_ISO
 
 #define SOL_HCI		0
 #define SOL_L2CAP	6
@@ -149,10 +151,39 @@ struct bt_voice {
 #define BT_MODE_LE_FLOWCTL	0x03
 #define BT_MODE_EXT_FLOWCTL	0x04
 
-#define BT_PKT_STATUS          16
+#define BT_PKT_STATUS           16
 
 #define BT_SCM_PKT_STATUS	0x03
 
+#define BT_ISO_QOS		17
+
+#define BT_ISO_QOS_CIG_UNSET	0xff
+#define BT_ISO_QOS_CIS_UNSET	0xff
+
+struct bt_iso_io_qos {
+	__u32 interval;
+	__u16 latency;
+	__u16 sdu;
+	__u8  phy;
+	__u8  rtn;
+};
+
+struct bt_iso_qos {
+	__u8  cig;
+	__u8  cis;
+	__u8  sca;
+	__u8  packing;
+	__u8  framing;
+	struct bt_iso_io_qos in;
+	struct bt_iso_io_qos out;
+};
+
+#define BT_ISO_PHY_1M		0x01
+#define BT_ISO_PHY_2M		0x02
+#define BT_ISO_PHY_CODED	0x04
+#define BT_ISO_PHY_ANY		(BT_ISO_PHY_1M | BT_ISO_PHY_2M | \
+				 BT_ISO_PHY_CODED)
+
 __printf(1, 2)
 void bt_info(const char *fmt, ...);
 __printf(1, 2)
include/net/bluetooth/hci.h +19 -0
index c1504aa3d9cf..f19b44bca3b0 100644
@@ -1884,6 +1884,25 @@ struct hci_cp_le_reject_cis {
 	__u8    reason;
 } __packed;
 
+#define HCI_OP_LE_SETUP_ISO_PATH		0x206e
+struct hci_cp_le_setup_iso_path {
+	__le16  handle;
+	__u8    direction;
+	__u8    path;
+	__u8    codec;
+	__le16  codec_cid;
+	__le16  codec_vid;
+	__u8    delay[3];
+	__u8    codec_cfg_len;
+	__u8    codec_cfg[0];
+} __attribute__ ((packed));
+
+#define HCI_OP_LE_SET_HOST_FEATURE		0x2074
+struct hci_cp_le_set_host_feature {
+	__u8     bit_number;
+	__u8     bit_value;
+} __packed;
+
 /* ---- HCI Events ---- */
 #define HCI_EV_INQUIRY_COMPLETE		0x01
 
include/net/bluetooth/hci_core.h +83 -1

187 lines not on this page · raw message

include/net/bluetooth/hci_sock.h +2 -0
index 9949870f7d78..0520e21ab698 100644
@@ -124,6 +124,8 @@ struct hci_dev_info {
 	__u16 acl_pkts;
 	__u16 sco_mtu;
 	__u16 sco_pkts;
+	__u16 iso_mtu;
+	__u16 iso_pkts;
 
 	struct hci_dev_stats stat;
 };
net/bluetooth/Kconfig +9 -0
index 64e669acd42f..bbe70c29ec62 100644
@@ -29,6 +29,7 @@ menuconfig BT
 		SCO audio links
 		L2CAP (Logical Link Control and Adaptation Protocol)
 		SMP (Security Manager Protocol) on LE (Low Energy) links
+		ISO isochronous links
 	     HCI Device drivers (Interface to the hardware)
 	     RFCOMM Module (RFCOMM Protocol)  
 	     BNEP Module (Bluetooth Network Encapsulation Protocol)
@@ -77,6 +78,14 @@ config BT_LE
 	  Bluetooth Low Energy includes support low-energy physical
 	  layer available with Bluetooth version 4.0 or later.
 
+config BT_ISO
+	bool "Bluetooth Isochronous (ISO) Channels support (Experimental)"
+	depends on BT_LE
+	help
+	  Bluetooth Isochronous Channels includes support for
+	  Connected Isochronous Stream (CIS) and Broadcast Isochronous Stream
+	  (BIS).
+
 config BT_6LOWPAN
 	tristate "Bluetooth 6LoWPAN support"
 	depends on BT_LE && 6LOWPAN
net/bluetooth/af_bluetooth.c +3 -1
index 4ef6a54403aa..fd4e1b40da9b 100644
@@ -38,7 +38,7 @@
 #include "selftest.h"
 
 /* Bluetooth sockets */
-#define BT_MAX_PROTO	8
+#define BT_MAX_PROTO	BTPROTO_LAST + 1
 static const struct net_proto_family *bt_proto[BT_MAX_PROTO];
 static DEFINE_RWLOCK(bt_proto_lock);
 
@@ -52,6 +52,7 @@ static const char *const bt_key_strings[BT_MAX_PROTO] = {
 	"sk_lock-AF_BLUETOOTH-BTPROTO_CMTP",
 	"sk_lock-AF_BLUETOOTH-BTPROTO_HIDP",
 	"sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_ISO",
 };
 
 static struct lock_class_key bt_slock_key[BT_MAX_PROTO];
@@ -64,6 +65,7 @@ static const char *const bt_slock_key_strings[BT_MAX_PROTO] = {
 	"slock-AF_BLUETOOTH-BTPROTO_CMTP",
 	"slock-AF_BLUETOOTH-BTPROTO_HIDP",
 	"slock-AF_BLUETOOTH-BTPROTO_AVDTP",
+	"slock-AF_BLUETOOTH-BTPROTO_ISO",
 };
 
 void bt_sock_reclassify_lock(struct sock *sk, int proto)
net/bluetooth/hci_conn.c +286 -0

298 lines not on this page · raw message

net/bluetooth/hci_core.c +212 -49

336 lines not on this page · raw message

net/bluetooth/hci_event.c +242 -0

292 lines not on this page · raw message

Signature · 1 line
2.26.2
author maintainer
#1 lore raw

PATCH 2/3 Bluetooth: Add BTPROTO_ISO socket type

From: Luiz Augusto von Dentz <[email protected]>

This introduces a new socket type BTPROTO_ISO which can be enabled with use of CONFIG_BT_ISO_SOCKET Kconfig option, it can used to initiate/accept connection and transfer packets between userspace and kernel similarly to how BTPROTO_SCO works.

---
 include/net/bluetooth/bluetooth.h |   14 +
 include/net/bluetooth/hci_core.h  |   18 +-
 include/net/bluetooth/iso.h       |   36 +
 net/bluetooth/Kconfig             |    7 +
 net/bluetooth/Makefile            |    1 +
 net/bluetooth/af_bluetooth.c      |   13 +-
 net/bluetooth/hci_core.c          |    7 +-
 net/bluetooth/iso.c               | 1406 +++++++++++++++++++++++++++++
 8 files changed, 1497 insertions(+), 5 deletions(-)
 create mode 100644 include/net/bluetooth/iso.h
 create mode 100644 net/bluetooth/iso.c
include/net/bluetooth/bluetooth.h +14 -0
index 26ae85bdc589..6c7fa4ea6d45 100644
@@ -489,6 +489,20 @@ static inline void sco_exit(void)
 }
 #endif
 
+#if IS_ENABLED(CONFIG_BT_ISO_SOCKET)
+int iso_init(void);
+void iso_exit(void);
+#else
+static inline int iso_init(void)
+{
+	return 0;
+}
+
+static inline void iso_exit(void)
+{
+}
+#endif
+
 int mgmt_init(void);
 void mgmt_exit(void);
 
include/net/bluetooth/hci_core.h +16 -2
index 0d2fa4dc4107..06f92762013b 100644
@@ -762,6 +762,21 @@ static inline void sco_recv_scodata(struct hci_conn *hcon, struct sk_buff *skb)
 }
 #endif
 
+#if IS_ENABLED(CONFIG_BT_ISO_SOCKET)
+int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags);
+void iso_recv(struct hci_conn *hcon, struct sk_buff *skb, u16 flags);
+#else
+static inline int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr,
+				  __u8 *flags)
+{
+	return 0;
+}
+static inline void iso_recv(struct hci_conn *hcon, struct sk_buff *skb,
+			    u16 flags)
+{
+}
+#endif
+
 /* ----- Inquiry cache ----- */
 #define INQUIRY_CACHE_AGE_MAX   (HZ*30)   /* 30 seconds */
 #define INQUIRY_ENTRY_AGE_MAX   (HZ*60)   /* 60 seconds */
@@ -1487,8 +1502,7 @@ static inline int hci_proto_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr,
 		return sco_connect_ind(hdev, bdaddr, flags);
 
 	case ISO_LINK:
-		/* TODO: Handle connection indication */
-		return -EINVAL;
+		return iso_connect_ind(hdev, bdaddr, flags);
 
 	default:
 		BT_ERR("unknown link type %d", type);
include/net/bluetooth/iso.h new file +36 -0
new file mode 100644
index 000000000000..a4fed59dea8f
@@ -0,0 +1,36 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2020 Intel Corporation
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __ISO_H
+#define __ISO_H
+
+/* ISO defaults */
+#define ISO_DEFAULT_MTU		251
+
+/* ISO socket address */
+struct sockaddr_iso {
+	sa_family_t	iso_family;
+	bdaddr_t	iso_bdaddr;
+	__u8		iso_bdaddr_type;
+};
+
+#endif /* __ISO_H */
net/bluetooth/Kconfig +7 -0
index bbe70c29ec62..19e45a93ff7d 100644
@@ -86,6 +86,13 @@ config BT_ISO
 	  Connected Isochronous Stream (CIS) and Broadcast Isochronous Stream
 	  (BIS).
 
+config BT_ISO_SOCKET
+	bool "Bluetooth Isochronous (ISO) Socket support (Experimental)"
+	depends on BT_ISO
+	help
+	  Bluetooth Isochronous Socket includes support for BTPROTO_ISO socket
+	  family.
+
 config BT_6LOWPAN
 	tristate "Bluetooth 6LoWPAN support"
 	depends on BT_LE && 6LOWPAN
net/bluetooth/Makefile +1 -0
index 1c645fba8c49..1a9b3d3a6db0 100644
@@ -17,6 +17,7 @@ bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \
 	ecdh_helper.o hci_request.o mgmt_util.o mgmt_config.o
 
 bluetooth-$(CONFIG_BT_BREDR) += sco.o
+bluetooth-$(CONFIG_BT_ISO_SOCKET) += iso.o
 bluetooth-$(CONFIG_BT_HS) += a2mp.o amp.o
 bluetooth-$(CONFIG_BT_LEDS) += leds.o
 bluetooth-$(CONFIG_BT_MSFTEXT) += msft.o
net/bluetooth/af_bluetooth.c +12 -1
index fd4e1b40da9b..929e6e8139ce 100644
@@ -758,12 +758,20 @@ static int __init bt_init(void)
 	if (err)
 		goto cleanup_cap;
 
+	if (IS_ENABLED(CONFIG_BT_ISO_SOCKET)) {
+		err = iso_init();
+		if (err)
+			goto cleanup_sco;
+	}
+
 	err = mgmt_init();
 	if (err)
-		goto cleanup_sco;
+		goto cleanup_iso;
 
 	return 0;
 
+cleanup_iso:
+	iso_exit();
 cleanup_sco:
 	sco_exit();
 cleanup_cap:
@@ -781,6 +789,9 @@ static void __exit bt_exit(void)
 {
 	mgmt_exit();
 
+	if (IS_ENABLED(CONFIG_BT_ISO_SOCKET))
+		iso_exit();
+
 	sco_exit();
 
 	l2cap_exit();
net/bluetooth/hci_core.c +5 -2
index fc0011c3a71d..fbd27563ecd4 100644
@@ -4972,8 +4972,11 @@ static void hci_isodata_packet(struct hci_dev *hdev, struct sk_buff *skb)
 	conn = hci_conn_hash_lookup_handle(hdev, handle);
 	hci_dev_unlock(hdev);
 
-	/* TODO: Send to upper protocol */
-	if (!conn) {
+	if (conn) {
+		/* Send to upper protocol */
+		iso_recv(conn, skb, flags);
+		return;
+	} else {
 		bt_dev_err(hdev, "ISO packet for unknown connection handle %d",
 			   handle);
 	}
net/bluetooth/iso.c new file +1406 -0

1,406 lines not on this page · raw message

Signature · 1 line
2.26.2
#2 lore raw

Re: [PATCH 2/3] Bluetooth: Add BTPROTO_ISO socket type

I love your patch! Perhaps something to improve:

Hi Luiz,

I love your patch! Perhaps something to improve:

[auto build test WARNING on bluetooth-next/master]
[also build test WARNING on v5.11-rc1 next-20201223]
[cannot apply to bluetooth/master]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Luiz-Augusto-von-Dentz/Bluetooth-Add-initial-implementation-of-CIS-connections/20201222-054425
base:   https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master
config: ia64-allmodconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 9.3.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/0c29289286983b97fb21b564e19fc1eed47ae0bd
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Luiz-Augusto-von-Dentz/Bluetooth-Add-initial-implementation-of-CIS-connections/20201222-054425 git checkout 0c29289286983b97fb21b564e19fc1eed47ae0bd
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

In file included from net/bluetooth/iso.c:30:

>> include/net/bluetooth/bluetooth.h:161:30: warning: initialized field overwritten [-Woverride-init]
     161 | #define BT_ISO_QOS_CIS_UNSET 0xff
         |                              ^~~~
   net/bluetooth/iso.c:529:10: note: in expansion of macro 'BT_ISO_QOS_CIS_UNSET'
     529 |  .cig  = BT_ISO_QOS_CIS_UNSET,
         |          ^~~~~~~~~~~~~~~~~~~~
   include/net/bluetooth/bluetooth.h:161:30: note: (near initialization for 'default_qos.cig')
     161 | #define BT_ISO_QOS_CIS_UNSET 0xff
         |                              ^~~~
   net/bluetooth/iso.c:529:10: note: in expansion of macro 'BT_ISO_QOS_CIS_UNSET'
     529 |  .cig  = BT_ISO_QOS_CIS_UNSET,
         |          ^~~~~~~~~~~~~~~~~~~~

Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for FRAME_POINTER
Depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
Selected by
- FAULT_INJECTION_STACKTRACE_FILTER && FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT && !X86_64 && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM && !ARC && !X86

vim +161 include/net/bluetooth/bluetooth.h

7c800e5d3fe2926 Luiz Augusto von Dentz 2020-12-21 159
7c800e5d3fe2926 Luiz Augusto von Dentz 2020-12-21 160 #define BT_ISO_QOS_CIG_UNSET 0xff
7c800e5d3fe2926 Luiz Augusto von Dentz 2020-12-21 @161 #define BT_ISO_QOS_CIS_UNSET 0xff
7c800e5d3fe2926 Luiz Augusto von Dentz 2020-12-21 162

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

author maintainer
#3 lore raw

PATCH 3/3 Bluetooth: btusb: Add support for ISO packets

In reply to Luiz Augusto von Dentz

From: Luiz Augusto von Dentz <[email protected]>

This enabled btusb driver to properly transmit ISO packets.

---
 drivers/bluetooth/btusb.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/bluetooth/btusb.c +14 -0
index b630a1d54c02..ffd262a2add1 100644
@@ -1587,6 +1587,13 @@ static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 
 		hdev->stat.sco_tx++;
 		return submit_tx_urb(hdev, urb);
+
+	case HCI_ISODATA_PKT:
+		urb = alloc_bulk_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		return submit_or_queue_tx_urb(hdev, urb);
 	}
 
 	return -EILSEQ;
@@ -2393,6 +2400,13 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
 
 		hdev->stat.sco_tx++;
 		return submit_tx_urb(hdev, urb);
+
+	case HCI_ISODATA_PKT:
+		urb = alloc_bulk_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		return submit_or_queue_tx_urb(hdev, urb);
 	}
 
 	return -EILSEQ;
Signature · 1 line
2.26.2
#4 lore raw
In reply to Luiz Augusto von Dentz

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=405017

---Test result---

##############################
Test: CheckPatch - PASS

##############################
Test: CheckGitLint - FAIL
workflow: Add workflow files for ci
1: T1 Title exceeds max length (92>72): "Merge fb54dab4c8c1b24ffb34be85ebd93766c0fc438c into cc63acd67663d4d8926873437ddc1910d2460c14" 3: B6 Body message is missing

Bluetooth: Add initial implementation of CIS connections
1: T1 Title exceeds max length (92>72): "Merge fb54dab4c8c1b24ffb34be85ebd93766c0fc438c into cc63acd67663d4d8926873437ddc1910d2460c14" 3: B6 Body message is missing

Bluetooth: Add BTPROTO_ISO socket type
1: T1 Title exceeds max length (92>72): "Merge fb54dab4c8c1b24ffb34be85ebd93766c0fc438c into cc63acd67663d4d8926873437ddc1910d2460c14" 3: B6 Body message is missing

Bluetooth: btusb: Add support for ISO packets
1: T1 Title exceeds max length (92>72): "Merge fb54dab4c8c1b24ffb34be85ebd93766c0fc438c into cc63acd67663d4d8926873437ddc1910d2460c14" 3: B6 Body message is missing

    ##############################
    Test: CheckBuildK - PASS
    

    ##############################
    Test: CheckTestRunner: Setup - PASS
    

    ##############################
    Test: CheckTestRunner: l2cap-tester - PASS
    Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6

    ##############################
    Test: CheckTestRunner: bnep-tester - PASS
    Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: mgmt-tester - FAIL
    Total: 416, Passed: 394 (94.7%), Failed: 8, Not Run: 14

    ##############################
    Test: CheckTestRunner: rfcomm-tester - PASS
    Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: sco-tester - PASS
    Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: smp-tester - PASS
    Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: userchan-tester - PASS
    Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0

---
Regards,
Linux Bluetooth

c[?7lSeaBIOS (version 1.13.0-1ubuntu1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e782e0
input_len: 0x000000000034efe0
output: 0x0000000001000000
output_len: 0x0000000001195364
kernel_total_size: 0x000000000102c000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.10.0-g34e646f46868 (root@0a141ac9fc74) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Mon Dec 21 22:11:02 UTC 2020
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/l2cap-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/l2cap-tester
New process 38 created
Changing into directory /github/workspace

Basic L2CAP Socket - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Basic L2CAP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic L2CAP Socket - Success - setup complete
Basic L2CAP Socket - Success - run
Basic L2CAP Socket - Success - test passed
Basic L2CAP Socket - Success - teardown
Index Removed callback

    Index: 0x0000

Basic L2CAP Socket - Success - teardown complete
Basic L2CAP Socket - Success - done

Non-connected getpeername - Failure - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Non-connected getpeername - Failure - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Non-connected getpeername - Failure - setup complete Non-connected getpeername - Failure - run Non-connected getpeername - Failure - test passed Non-connected getpeername - Failure - teardown
Index Removed callback

    Index: 0x0000

Non-connected getpeername - Failure - teardown complete Non-connected getpeername - Failure - done

L2CAP BR/EDR Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Success - setup complete
L2CAP BR/EDR Client - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Success - test passed
L2CAP BR/EDR Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Success - teardown complete
L2CAP BR/EDR Client - Success - done

L2CAP BR/EDR Client SSP - Success 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client SSP - Success 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 1 - setup complete L2CAP BR/EDR Client SSP - Success 1 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 1 - test passed L2CAP BR/EDR Client SSP - Success 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client SSP - Success 1 - teardown complete L2CAP BR/EDR Client SSP - Success 1 - done

L2CAP BR/EDR Client SSP - Success 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client SSP - Success 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 2 - setup complete L2CAP BR/EDR Client SSP - Success 2 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 2 - test passed L2CAP BR/EDR Client SSP - Success 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client SSP - Success 2 - teardown complete L2CAP BR/EDR Client SSP - Success 2 - done

L2CAP BR/EDR Client PIN Code - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client PIN Code - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client PIN Code - Success - setup complete L2CAP BR/EDR Client PIN Code - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client PIN Code - Success - test passed L2CAP BR/EDR Client PIN Code - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client PIN Code - Success - teardown complete L2CAP BR/EDR Client PIN Code - Success - done

L2CAP BR/EDR Client - Read Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Read Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Read Success - setup complete L2CAP BR/EDR Client - Read Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Read Success - test passed L2CAP BR/EDR Client - Read Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Read Success - teardown complete L2CAP BR/EDR Client - Read Success - done

L2CAP BR/EDR Client - Write Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Write Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Write Success - setup complete L2CAP BR/EDR Client - Write Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Write Success - test passed L2CAP BR/EDR Client - Write Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Write Success - teardown complete L2CAP BR/EDR Client - Write Success - done

L2CAP BR/EDR Client - Invalid PSM 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 1 - setup complete L2CAP BR/EDR Client - Invalid PSM 1 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 1 - test passed L2CAP BR/EDR Client - Invalid PSM 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 1 - teardown complete L2CAP BR/EDR Client - Invalid PSM 1 - done

L2CAP BR/EDR Client - Invalid PSM 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 2 - setup complete L2CAP BR/EDR Client - Invalid PSM 2 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 2 - test passed L2CAP BR/EDR Client - Invalid PSM 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 2 - teardown complete L2CAP BR/EDR Client - Invalid PSM 2 - done

L2CAP BR/EDR Client - Invalid PSM 3 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 3 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client - Invalid PSM 3 - setup complete L2CAP BR/EDR Client - Invalid PSM 3 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 3 - test passed L2CAP BR/EDR Client - Invalid PSM 3 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 3 - teardown complete L2CAP BR/EDR Client - Invalid PSM 3 - done

L2CAP BR/EDR Client - Socket Shut WR Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Socket Shut WR Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Socket Shut WR Success - setup complete L2CAP BR/EDR Client - Socket Shut WR Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Socket Shut WR Success - test passed L2CAP BR/EDR Client - Socket Shut WR Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Socket Shut WR Success - teardown complete L2CAP BR/EDR Client - Socket Shut WR Success - done

L2CAP BR/EDR Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Success - setup complete
L2CAP BR/EDR Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Success - test passed
Successfully connected
L2CAP BR/EDR Server - Success - test passed
L2CAP BR/EDR Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Success - teardown complete
L2CAP BR/EDR Server - Success - done

L2CAP BR/EDR Server - Read Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Read Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Read Success - setup complete L2CAP BR/EDR Server - Read Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Read Success - test passed L2CAP BR/EDR Server - Read Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Read Success - teardown complete L2CAP BR/EDR Server - Read Success - done

L2CAP BR/EDR Server - Write Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Write Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Write Success - setup complete L2CAP BR/EDR Server - Write Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Write Success - test passed L2CAP BR/EDR Server - Write Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Write Success - teardown complete L2CAP BR/EDR Server - Write Success - done

L2CAP BR/EDR Server - Security Block - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Security Block - setup
Powering on controller
Controller powered on
Server enable SSP status 0x00
L2CAP BR/EDR Server - Security Block - setup complete L2CAP BR/EDR Server - Security Block - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Security Block - test passed L2CAP BR/EDR Server - Security Block - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Security Block - teardown complete L2CAP BR/EDR Server - Security Block - done

L2CAP BR/EDR Server - Invalid PSM - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid PSM - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PSM - setup complete L2CAP BR/EDR Server - Invalid PSM - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Invalid PSM - test passed L2CAP BR/EDR Server - Invalid PSM - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid PSM - teardown complete L2CAP BR/EDR Server - Invalid PSM - done

L2CAP BR/EDR Server - Invalid PDU - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid PDU - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PDU - setup complete L2CAP BR/EDR Server - Invalid PDU - run
New client connection with handle 0x002a Sending L2CAP Request from client
Bluetooth: Wrong link type (-71)
Client received response code 0x01
L2CAP BR/EDR Server - Invalid PDU - test passed L2CAP BR/EDR Server - Invalid PDU - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid PDU - teardown complete L2CAP BR/EDR Server - Invalid PDU - done

L2CAP BR/EDR Server - Invalid Disconnect CID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid Disconnect CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Disconnect CID - setup complete L2CAP BR/EDR Server - Invalid Disconnect CID - run
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Disconnect CID - test passed L2CAP BR/EDR Server - Invalid Disconnect CID - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid Disconnect CID - teardown complete L2CAP BR/EDR Server - Invalid Disconnect CID - done

L2CAP BR/EDR Server - Invalid Config CID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid Config CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Config CID - setup complete L2CAP BR/EDR Server - Invalid Config CID - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Config CID - test passed L2CAP BR/EDR Server - Invalid Config CID - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid Config CID - teardown complete L2CAP BR/EDR Server - Invalid Config CID - done

L2CAP LE Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Success - setup complete
L2CAP LE Client - Success - run
Connect in progress
Successfully connected
L2CAP LE Client - Success - test passed
L2CAP LE Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Success - teardown complete
L2CAP LE Client - Success - done

L2CAP LE Client, Direct Advertising - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client, Direct Advertising - Success - setup complete L2CAP LE Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP LE Client, Direct Advertising - Success - test passed L2CAP LE Client, Direct Advertising - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client, Direct Advertising - Success - teardown complete L2CAP LE Client, Direct Advertising - Success - done

L2CAP LE Client SMP - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client SMP - Success - setup complete
L2CAP LE Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP LE Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP LE Client SMP - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client SMP - Success - teardown complete
L2CAP LE Client SMP - Success - done

L2CAP LE Client - Command Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Command Reject - setup complete
L2CAP LE Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP LE Client - Command Reject - test passed
L2CAP LE Client - Command Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Command Reject - teardown complete L2CAP LE Client - Command Reject - done

L2CAP LE Client - Connection Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Connection Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Connection Reject - setup complete L2CAP LE Client - Connection Reject - run
Can't connect socket: No route to host (113)
L2CAP LE Client - Connection Reject - test passed L2CAP LE Client - Connection Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Connection Reject - teardown complete L2CAP LE Client - Connection Reject - done

L2CAP LE Client - Close socket 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Close socket 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Close socket 1 - setup complete
L2CAP LE Client - Close socket 1 - run
Connect in progress, sk = 19
Will close socket during scan phase...
Checking whether scan was properly stopped...
L2CAP LE Client - Close socket 1 - test passed
L2CAP LE Client - Close socket 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Close socket 1 - teardown complete L2CAP LE Client - Close socket 1 - done

L2CAP LE Client - Close socket 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Close socket 2 - setup
Powering on controller
Controller powered on
L2CAP LE Client - Close socket 2 - setup complete
L2CAP LE Client - Close socket 2 - run
Connect in progress, sk = 19
Client set connectable status 0x00
Client set connectable status 0x00
L2CAP LE Client - Close socket 2 - test passed
L2CAP LE Client - Close socket 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Close socket 2 - teardown complete L2CAP LE Client - Close socket 2 - done

L2CAP LE Client - Open two sockets - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets - setup complete L2CAP LE Client - Open two sockets - run
Connect in progress, sk = 19
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 20
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
L2CAP LE Client - Open two sockets - test passed

(l2cap-tester:38): GLib-WARNING **: 22:11:10.996: Invalid file descriptor. L2CAP LE Client - Open two sockets - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Open two sockets - teardown complete L2CAP LE Client - Open two sockets - done

L2CAP LE Client - Open two sockets close one - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets close one - setup complete L2CAP LE Client - Open two sockets close one - run
Connect in progress, sk = 19
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 20
Closing first socket! 19
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP LE Client - Open two sockets close one - test passed

(l2cap-tester:38): GLib-WARNING **: 22:11:11.028: Invalid file descriptor. L2CAP LE Client - Open two sockets close one - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Open two sockets close one - teardown complete L2CAP LE Client - Open two sockets close one - done

L2CAP LE Client - Invalid PSM - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Invalid PSM - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Invalid PSM - setup complete
L2CAP LE Client - Invalid PSM - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP LE Client - Invalid PSM - test passed
L2CAP LE Client - Invalid PSM - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Invalid PSM - teardown complete
L2CAP LE Client - Invalid PSM - done

L2CAP LE Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE Server - Success - setup complete
L2CAP LE Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Successfully connected
L2CAP LE Server - Success - test passed
Client received response code 0x15
L2CAP LE Server - Success - test passed
L2CAP LE Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Server - Success - teardown complete
L2CAP LE Server - Success - done

L2CAP LE Server - Nval SCID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Server - Nval SCID - setup
Powering on controller
Controller powered on
L2CAP LE Server - Nval SCID - setup complete
L2CAP LE Server - Nval SCID - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x15
L2CAP LE Server - Nval SCID - test passed
L2CAP LE Server - Nval SCID - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Server - Nval SCID - teardown complete
L2CAP LE Server - Nval SCID - done

L2CAP Ext-Flowctl Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Success - setup complete L2CAP Ext-Flowctl Client - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client - Success - test not run L2CAP Ext-Flowctl Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Success - teardown complete L2CAP Ext-Flowctl Client - Success - done

L2CAP Ext-Flowctl Client, Direct Advertising - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client, Direct Advertising - Success - test not run L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - done

L2CAP Ext-Flowctl Client SMP - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client SMP - Success - setup complete L2CAP Ext-Flowctl Client SMP - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client SMP - Success - test not run L2CAP Ext-Flowctl Client SMP - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client SMP - Success - teardown complete L2CAP Ext-Flowctl Client SMP - Success - done

L2CAP Ext-Flowctl Client - Command Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Command Reject - setup complete L2CAP Ext-Flowctl Client - Command Reject - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client - Command Reject - test not run L2CAP Ext-Flowctl Client - Command Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Command Reject - teardown complete L2CAP Ext-Flowctl Client - Command Reject - done

L2CAP Ext-Flowctl Client - Open two sockets - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets - setup complete L2CAP Ext-Flowctl Client - Open two sockets - run
Can't set mode: Protocol not available (92) Error in create_l2cap_sock
L2CAP Ext-Flowctl Client - Open two sockets - test not run L2CAP Ext-Flowctl Client - Open two sockets - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Open two sockets - teardown complete L2CAP Ext-Flowctl Client - Open two sockets - done

L2CAP Ext-Flowctl Client - Open two sockets close one - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets close one - setup complete L2CAP Ext-Flowctl Client - Open two sockets close one - run
Can't set mode: Protocol not available (92)
Error in create_l2cap_sock
L2CAP Ext-Flowctl Client - Open two sockets close one - test not run L2CAP Ext-Flowctl Client - Open two sockets close one - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Open two sockets close one - teardown complete L2CAP Ext-Flowctl Client - Open two sockets close one - done

L2CAP LE ATT Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE ATT Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE ATT Client - Success - setup complete
L2CAP LE ATT Client - Success - run
Connect in progress
Successfully connected
L2CAP LE ATT Client - Success - test passed
L2CAP LE ATT Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE ATT Client - Success - teardown complete
L2CAP LE ATT Client - Success - done

L2CAP LE ATT Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE ATT Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE ATT Server - Success - setup complete
L2CAP LE ATT Server - Success - run
Listening for connections
New client connection with handle 0x002a
Successfully connected
L2CAP LE ATT Server - Success - test passed
L2CAP LE ATT Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE ATT Server - Success - teardown complete
L2CAP LE ATT Server - Success - done

Test Summary
------------

Basic L2CAP Socket - Success                         Passed       0.060 seconds
Non-connected getpeername - Failure                  Passed       0.020 seconds
L2CAP BR/EDR Client - Success                        Passed       0.036 seconds
L2CAP BR/EDR Client SSP - Success 1                  Passed       0.032 seconds
L2CAP BR/EDR Client SSP - Success 2                  Passed       0.016 seconds
L2CAP BR/EDR Client PIN Code - Success               Passed       0.020 seconds
L2CAP BR/EDR Client - Read Success                   Passed       0.012 seconds
L2CAP BR/EDR Client - Write Success                  Passed       0.016 seconds
L2CAP BR/EDR Client - Invalid PSM 1                  Passed       0.016 seconds
L2CAP BR/EDR Client - Invalid PSM 2                  Passed       0.016 seconds
L2CAP BR/EDR Client - Invalid PSM 3                  Passed       0.012 seconds
L2CAP BR/EDR Client - Socket Shut WR Success         Passed       0.016 seconds
L2CAP BR/EDR Server - Success                        Passed       0.020 seconds
L2CAP BR/EDR Server - Read Success                   Passed       0.020 seconds
L2CAP BR/EDR Server - Write Success                  Passed       0.012 seconds
L2CAP BR/EDR Server - Security Block                 Passed       0.020 seconds
L2CAP BR/EDR Server - Invalid PSM                    Passed       0.016 seconds
L2CAP BR/EDR Server - Invalid PDU                    Passed       0.020 seconds
L2CAP BR/EDR Server - Invalid Disconnect CID         Passed       0.020 seconds
L2CAP BR/EDR Server - Invalid Config CID             Passed       0.020 seconds
L2CAP LE Client - Success                            Passed       0.028 seconds
L2CAP LE Client, Direct Advertising - Success        Passed       0.020 seconds
L2CAP LE Client SMP - Success                        Passed       0.032 seconds
L2CAP LE Client - Command Reject                     Passed       0.012 seconds
L2CAP LE Client - Connection Reject                  Passed       0.020 seconds
L2CAP LE Client - Close socket 1                     Passed       0.016 seconds
L2CAP LE Client - Close socket 2                     Passed       0.016 seconds
L2CAP LE Client - Open two sockets                   Passed       0.044 seconds
L2CAP LE Client - Open two sockets close one         Passed       0.020 seconds
L2CAP LE Client - Invalid PSM                        Passed       0.016 seconds
L2CAP LE Server - Success                            Passed       0.016 seconds
L2CAP LE Server - Nval SCID                          Passed       0.016 seconds
L2CAP Ext-Flowctl Client - Success                   Not Run   
L2CAP Ext-Flowctl Client, Direct Advertising - Success Not Run   
L2CAP Ext-Flowctl Client SMP - Success               Not Run   
L2CAP Ext-Flowctl Client - Command Reject            Not Run   
L2CAP Ext-Flowctl Client - Open two sockets          Not Run   
L2CAP Ext-Flowctl Client - Open two sockets close one Not Run   
L2CAP LE ATT Client - Success                        Passed       0.024 seconds
L2CAP LE ATT Server - Success                        Passed       0.016 seconds

Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6 Overall execution time: 0.852 seconds Process 38 exited with status 0
reboot: Restarting system

c[?7lSeaBIOS (version 1.13.0-1ubuntu1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e782e0
input_len: 0x000000000034efe0
output: 0x0000000001000000
output_len: 0x0000000001195364
kernel_total_size: 0x000000000102c000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.10.0-g34e646f46868 (root@0a141ac9fc74) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Mon Dec 21 22:11:02 UTC 2020
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/bnep-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/bnep-tester
New process 38 created
Changing into directory /github/workspace

Basic BNEP Socket - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Basic BNEP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic BNEP Socket - Success - setup complete
Basic BNEP Socket - Success - run
Basic BNEP Socket - Success - test passed
Basic BNEP Socket - Success - teardown
Index Removed callback

    Index: 0x0000

Basic BNEP Socket - Success - teardown complete
Basic BNEP Socket - Success - done

Test Summary
------------
Basic BNEP Socket - Success Passed 0.052 seconds
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.06 seconds Process 38 exited with status 0
reboot: Restarting system

c[?7lSeaBIOS (version 1.13.0-1ubuntu1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e782e0
input_len: 0x000000000034efe0
output: 0x0000000001000000
output_len: 0x0000000001195364
kernel_total_size: 0x000000000102c000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.10.0-g34e646f46868 (root@0a141ac9fc74) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Mon Dec 21 22:11:02 UTC 2020
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/mgmt-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/mgmt-tester
Changing into directory /github/workspace
New process 38 created

Controller setup - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Controller setup - setup
Controller setup - setup complete
Controller setup - run
Controller setup - test passed
Controller setup - teardown
Index Removed callback

    Index: 0x0000

Controller setup - teardown complete
Controller setup - done

Controller setup (BR/EDR-only) - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Controller setup (BR/EDR-only) - setup
Controller setup (BR/EDR-only) - setup complete
Controller setup (BR/EDR-only) - run
Controller setup (BR/EDR-only) - test passed
Controller setup (BR/EDR-only) - teardown
Index Removed callback

    Index: 0x0000

Controller setup (BR/EDR-only) - teardown complete Controller setup (BR/EDR-only) - done

Controller setup (LE) - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Controller setup (LE) - setup
Controller setup (LE) - setup complete
Controller setup (LE) - run
Controller setup (LE) - test passed
Controller setup (LE) - teardown
Index Removed callback

    Index: 0x0000

Controller setup (LE) - teardown complete
Controller setup (LE) - done

Invalid command - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Invalid command - setup
Invalid command - setup complete
Invalid command - run
Sending <unknown opcode> (0xffff)
Test condition added, total 1
<unknown opcode> (0xffff): Unknown Command (0x01) Test condition complete, 0 left
Invalid command - test passed
Invalid command - teardown
Index Removed callback

    Index: 0x0000

Invalid command - teardown complete
Invalid command - done

Read version - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Success - setup
Read version - Success - setup complete
Read version - Success - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Success (0x00)
Test condition complete, 0 left
Read version - Success - test passed
Read version - Success - teardown
Index Removed callback

    Index: 0x0000

Read version - Success - teardown complete
Read version - Success - done

Read version - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Invalid parameters - setup Read version - Invalid parameters - setup complete Read version - Invalid parameters - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Parameters (0x0d) Test condition complete, 0 left
Read version - Invalid parameters - test passed Read version - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read version - Invalid parameters - teardown complete Read version - Invalid parameters - done

Read version - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Invalid index - setup
Read version - Invalid index - setup complete
Read version - Invalid index - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Index (0x11)
Test condition complete, 0 left
Read version - Invalid index - test passed
Read version - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read version - Invalid index - teardown complete
Read version - Invalid index - done

Read commands - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read commands - Invalid parameters - setup Read commands - Invalid parameters - setup complete Read commands - Invalid parameters - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Parameters (0x0d) Test condition complete, 0 left
Read commands - Invalid parameters - test passed Read commands - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read commands - Invalid parameters - teardown complete Read commands - Invalid parameters - done

Read commands - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read commands - Invalid index - setup
Read commands - Invalid index - setup complete
Read commands - Invalid index - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Index (0x11)
Test condition complete, 0 left
Read commands - Invalid index - test passed
Read commands - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read commands - Invalid index - teardown complete
Read commands - Invalid index - done

Read index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read index list - Invalid parameters - setup Read index list - Invalid parameters - setup complete Read index list - Invalid parameters - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Parameters (0x0d) Test condition complete, 0 left
Read index list - Invalid parameters - test passed Read index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read index list - Invalid parameters - teardown complete Read index list - Invalid parameters - done

Read index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read index list - Invalid index - setup
Read index list - Invalid index - setup complete
Read index list - Invalid index - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Index (0x11)
Test condition complete, 0 left
Read index list - Invalid index - test passed
Read index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read index list - Invalid index - teardown complete Read index list - Invalid index - done

Read info - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read info - Invalid parameters - setup
Read info - Invalid parameters - setup complete Read info - Invalid parameters - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Parameters (0x0d) Test condition complete, 0 left
Read info - Invalid parameters - test passed
Read info - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read info - Invalid parameters - teardown complete Read info - Invalid parameters - done

Read info - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read info - Invalid index - setup
Read info - Invalid index - setup complete Read info - Invalid index - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Index (0x11) Test condition complete, 0 left
Read info - Invalid index - test passed
Read info - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read info - Invalid index - teardown complete
Read info - Invalid index - done

Read unconfigured index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read unconfigured index list - Invalid parameters - setup Read unconfigured index list - Invalid parameters - setup complete Read unconfigured index list - Invalid parameters - run
Sending Read Unconfigured Index List (0x0036)
Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Parameters (0x0d) Test condition complete, 0 left
Read unconfigured index list - Invalid parameters - test passed Read unconfigured index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read unconfigured index list - Invalid parameters - teardown complete Read unconfigured index list - Invalid parameters - done

Read unconfigured index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read unconfigured index list - Invalid index - setup Read unconfigured index list - Invalid index - setup complete Read unconfigured index list - Invalid index - run
Sending Read Unconfigured Index List (0x0036) Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Index (0x11) Test condition complete, 0 left
Read unconfigured index list - Invalid index - test passed Read unconfigured index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read unconfigured index list - Invalid index - teardown complete Read unconfigured index list - Invalid index - done

Read configuration info - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read configuration info - Invalid parameters - setup
Read configuration info - Invalid parameters - setup complete
Read configuration info - Invalid parameters - run
Sending Read Controller Configuration Information (0x0037)
Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Parameters (0x0d) Test condition complete, 0 left
Read configuration info - Invalid parameters - test passed
Read configuration info - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read configuration info - Invalid parameters - teardown complete Read configuration info - Invalid parameters - done

Read configuration info - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read configuration info - Invalid index - setup
Read configuration info - Invalid index - setup complete
Read configuration info - Invalid index - run
Sending Read Controller Configuration Information (0x0037) Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Index (0x11) Test condition complete, 0 left
Read configuration info - Invalid index - test passed
Read configuration info - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read configuration info - Invalid index - teardown complete Read configuration info - Invalid index - done

Read extended index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read extended index list - Invalid parameters - setup
Read extended index list - Invalid parameters - setup complete Read extended index list - Invalid parameters - run
Sending Read Extended Controller Index List (0x003c)
Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Parameters (0x0d) Test condition complete, 0 left
Read extended index list - Invalid parameters - test passed Read extended index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read extended index list - Invalid parameters - teardown complete Read extended index list - Invalid parameters - done

Read extended index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read extended index list - Invalid index - setup
Read extended index list - Invalid index - setup complete Read extended index list - Invalid index - run
Sending Read Extended Controller Index List (0x003c) Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Index (0x11) Test condition complete, 0 left
Read extended index list - Invalid index - test passed Read extended index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read extended index list - Invalid index - teardown complete Read extended index list - Invalid index - done

Set powered on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Success - setup
Set powered on - Success - setup complete
Set powered on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered on - Success - test passed
Set powered on - Success - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set powered on - Success - teardown complete
Set powered on - Success - done

Set powered on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 1 - setup Set powered on - Invalid parameters 1 - setup complete Set powered on - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 1 - test passed Set powered on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 1 - teardown complete Set powered on - Invalid parameters 1 - done

Set powered on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 2 - setup Set powered on - Invalid parameters 2 - setup complete Set powered on - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 2 - test passed Set powered on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 2 - teardown complete Set powered on - Invalid parameters 2 - done

Set powered on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 3 - setup Set powered on - Invalid parameters 3 - setup complete Set powered on - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 3 - test passed Set powered on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 3 - teardown complete Set powered on - Invalid parameters 3 - done

Set powered on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid index - setup
Set powered on - Invalid index - setup complete
Set powered on - Invalid index - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Index (0x11)
Test condition complete, 0 left
Set powered on - Invalid index - test passed
Set powered on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid index - teardown complete Set powered on - Invalid index - done

Set powered on - Privacy and Advertising - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Privacy and Advertising - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered on - Privacy and Advertising - setup complete Set powered on - Privacy and Advertising - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Success (0x00)
Test condition complete, 0 left
Set powered on - Privacy and Advertising - test passed Set powered on - Privacy and Advertising - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Privacy and Advertising - teardown complete Set powered on - Privacy and Advertising - done

Set powered off - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Success - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Success - setup complete
Set powered off - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered off - Success - test passed
Set powered off - Success - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Success - teardown complete
Set powered off - Success - done

Set powered off - Class of Device - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Class of Device - setup
Setting device class and powering on Controller powered on
Client set connectable: Success (0x00)
Set powered off - Class of Device - setup complete Set powered off - Class of Device - run
Registering new settings notification Test condition added, total 1 Registering Class of Device Changed notification Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
Set Powered (0x0005): Success (0x00) Test condition complete, 2 left
New Class of Device Changed event received Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set powered off - Class of Device - test passed Set powered off - Class of Device - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Class of Device - teardown complete Set powered off - Class of Device - done

Set powered off - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 1 - setup complete Set powered off - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 1 - test passed Set powered off - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 1 - teardown complete Set powered off - Invalid parameters 1 - done

Set powered off - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 2 - setup complete Set powered off - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 2 - test passed Set powered off - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 2 - teardown complete Set powered off - Invalid parameters 2 - done

Set powered off - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 3 - setup complete Set powered off - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 3 - test passed Set powered off - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 3 - teardown complete Set powered off - Invalid parameters 3 - done

Set connectable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Success 1 - setup
Set connectable on - Success 1 - setup complete
Set connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000082 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 1 - test passed
Set connectable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Success 1 - teardown complete Set connectable on - Success 1 - done

Set connectable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on - Success 2 - setup complete
Set connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000083 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 2 - test passed
Set connectable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on - Success 2 - teardown complete Set connectable on - Success 2 - done

Set connectable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 1 - setup Set connectable on - Invalid parameters 1 - setup complete Set connectable on - Invalid parameters 1 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 1 - test passed Set connectable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 1 - teardown complete Set connectable on - Invalid parameters 1 - done

Set connectable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 2 - setup Set connectable on - Invalid parameters 2 - setup complete Set connectable on - Invalid parameters 2 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 2 - test passed Set connectable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 2 - teardown complete Set connectable on - Invalid parameters 2 - done

Set connectable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 3 - setup Set connectable on - Invalid parameters 3 - setup complete Set connectable on - Invalid parameters 3 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 3 - test passed Set connectable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 3 - teardown complete Set connectable on - Invalid parameters 3 - done

Set connectable on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid index - setup Set connectable on - Invalid index - setup complete Set connectable on - Invalid index - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Index (0x11) Test condition complete, 0 left
Set connectable on - Invalid index - test passed Set connectable on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid index - teardown complete Set connectable on - Invalid index - done

Set connectable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 1 - setup Set connectable on (LE) - Success 1 - setup complete Set connectable on (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000202 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 1 - test passed Set connectable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 1 - teardown complete Set connectable on (LE) - Success 1 - done

Set connectable on (LE) - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on (LE) - Success 2 - setup complete Set connectable on (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000203 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 2 - test passed Set connectable on (LE) - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 2 - teardown complete Set connectable on (LE) - Success 2 - done

Set connectable on (LE) - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on (LE) - Success 3 - setup complete Set connectable on (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000603 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 3 - test passed Set connectable on (LE) - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 3 - teardown complete Set connectable on (LE) - Success 3 - done

Set connectable off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 1 - setup complete
Set connectable off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 1 - test passed
Set connectable off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable off - Success 1 - teardown complete Set connectable off - Success 1 - done

Set connectable off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 2 - setup complete
Set connectable off - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 2 - test passed
Set connectable off - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 2 - teardown complete Set connectable off - Success 2 - done

Set connectable off - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 3 - setup complete
Set connectable off - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 3 - test passed
Set connectable off - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 3 - teardown complete Set connectable off - Success 3 - done

Set connectable off - Success 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 4 - setup
Initial settings completed
Powering on controller (with added device)
Controller powered on
Client set connectable: Success (0x00)
Set connectable off - Success 4 - setup complete
Set connectable off - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 4 - test passed
Set connectable off - Success 4 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 4 - teardown complete Set connectable off - Success 4 - done

Set connectable off (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 1 - setup complete Set connectable off (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000200 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 1 - test passed Set connectable off (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 1 - teardown complete Set connectable off (LE) - Success 1 - done

Set connectable off (LE) - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 2 - setup complete Set connectable off (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 2 - test passed Set connectable off (LE) - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 2 - teardown complete Set connectable off (LE) - Success 2 - done

Set connectable off (LE) - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 3 - setup complete Set connectable off (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 3 - test passed Set connectable off (LE) - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 3 - teardown complete Set connectable off (LE) - Success 3 - done

Set connectable off (LE) - Success 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 4 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 4 - setup complete Set connectable off (LE) - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 4 - test passed Set connectable off (LE) - Success 4 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 4 - teardown complete Set connectable off (LE) - Success 4 - done

Set fast connectable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Success 1 - setup complete Set fast connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000087 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 1 - test passed Set fast connectable on - Success 1 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 1 - teardown complete Set fast connectable on - Success 1 - done

Set fast connectable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Success 2 - setup complete Set fast connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000085 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 2 - test passed Set fast connectable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 2 - teardown complete Set fast connectable on - Success 2 - done

Set fast connectable on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 3 - setup Set fast connectable on - Success 3 - setup complete Set fast connectable on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000084 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 3 - test passed Set fast connectable on - Success 3 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 3 - teardown complete Set fast connectable on - Success 3 - done

Set fast connectable on - Invalid Params 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Invalid Params 1 - setup Set fast connectable on - Invalid Params 1 - setup complete Set fast connectable on - Invalid Params 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Invalid Parameters (0x0d) Test condition complete, 0 left
Set fast connectable on - Invalid Params 1 - test passed Set fast connectable on - Invalid Params 1 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Invalid Params 1 - teardown complete Set fast connectable on - Invalid Params 1 - done

Set fast connectable on - Not Supported 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Not Supported 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Not Supported 1 - setup complete Set fast connectable on - Not Supported 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Not Supported (0x0c) Test condition complete, 0 left
Set fast connectable on - Not Supported 1 - test passed Set fast connectable on - Not Supported 1 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Not Supported 1 - teardown complete Set fast connectable on - Not Supported 1 - done

Set bondable on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Success - setup
Set bondable on - Success - setup complete
Set bondable on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Bondable (0x0009)
Test condition added, total 2
Set Bondable (0x0009): Success (0x00)
Test condition complete, 1 left
New settings 0x00000090 received
Unregistering new settings notification
Test condition complete, 0 left
Set bondable on - Success - test passed
Set bondable on - Success - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Success - teardown complete
Set bondable on - Success - done

Set bondable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 1 - setup Set bondable on - Invalid parameters 1 - setup complete Set bondable on - Invalid parameters 1 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 1 - test passed Set bondable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 1 - teardown complete Set bondable on - Invalid parameters 1 - done

Set bondable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 2 - setup Set bondable on - Invalid parameters 2 - setup complete Set bondable on - Invalid parameters 2 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 2 - test passed Set bondable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 2 - teardown complete Set bondable on - Invalid parameters 2 - done

Set bondable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 3 - setup Set bondable on - Invalid parameters 3 - setup complete Set bondable on - Invalid parameters 3 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 3 - test passed Set bondable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 3 - teardown complete Set bondable on - Invalid parameters 3 - done

Set bondable on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid index - setup
Set bondable on - Invalid index - setup complete
Set bondable on - Invalid index - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Index (0x11)
Test condition complete, 0 left
Set bondable on - Invalid index - test passed
Set bondable on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid index - teardown complete Set bondable on - Invalid index - done

Set discoverable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 1 - setup Set discoverable on - Invalid parameters 1 - setup complete Set discoverable on - Invalid parameters 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 1 - test passed Set discoverable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 1 - teardown complete Set discoverable on - Invalid parameters 1 - done

Set discoverable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 2 - setup Set discoverable on - Invalid parameters 2 - setup complete Set discoverable on - Invalid parameters 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 2 - test passed Set discoverable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 2 - teardown complete Set discoverable on - Invalid parameters 2 - done

Set discoverable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 3 - setup Set discoverable on - Invalid parameters 3 - setup complete Set discoverable on - Invalid parameters 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 3 - test passed Set discoverable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 3 - teardown complete Set discoverable on - Invalid parameters 3 - done

Set discoverable on - Invalid parameters 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 4 - setup Set discoverable on - Invalid parameters 4 - setup complete Set discoverable on - Invalid parameters 4 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 4 - test passed Set discoverable on - Invalid parameters 4 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 4 - teardown complete Set discoverable on - Invalid parameters 4 - done

Set discoverable on - Not powered 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Not powered 1 - setup Set discoverable on - Not powered 1 - setup complete Set discoverable on - Not powered 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 1 - test passed Set discoverable on - Not powered 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Not powered 1 - teardown complete Set discoverable on - Not powered 1 - done

Set discoverable on - Not powered 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Not powered 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Not powered 2 - setup complete Set discoverable on - Not powered 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 2 - test passed Set discoverable on - Not powered 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Not powered 2 - teardown complete Set discoverable on - Not powered 2 - done

Set discoverable on - Rejected 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 1 - setup complete
Set discoverable on - Rejected 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 1 - test passed
Set discoverable on - Rejected 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 1 - teardown complete Set discoverable on - Rejected 1 - done

Set discoverable on - Rejected 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 2 - setup complete
Set discoverable on - Rejected 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 2 - test passed
Set discoverable on - Rejected 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 2 - teardown complete Set discoverable on - Rejected 2 - done

Set discoverable on - Rejected 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 3 - setup complete
Set discoverable on - Rejected 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 3 - test passed
Set discoverable on - Rejected 3 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 3 - teardown complete Set discoverable on - Rejected 3 - done

Set discoverable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Success 1 - setup complete
Set discoverable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008a received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 1 - test passed
Set discoverable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Success 1 - teardown complete Set discoverable on - Success 1 - done

Set discoverable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Success 2 - setup complete
Set discoverable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Discoverable (0x0006)
Test condition added, total 3
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008b received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 2 - test passed
Set discoverable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set discoverable on - Success 2 - teardown complete Set discoverable on - Success 2 - done

Set discoverable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on (LE) - Success 1 - setup complete Set discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set discoverable on (LE) - Success 1 - test passed Set discoverable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on (LE) - Success 1 - teardown complete Set discoverable on (LE) - Success 1 - done

Set discoverable off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable off - Success 1 - setup complete
Set discoverable off - Success 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 1 - test passed
Set discoverable off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable off - Success 1 - teardown complete Set discoverable off - Success 1 - done

Set discoverable off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable off - Success 2 - setup complete
Set discoverable off - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c1a length 1
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 2 - test passed
Set discoverable off - Success 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable off - Success 2 - teardown complete Set discoverable off - Success 2 - done

Set limited discoverable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 1 - setup complete Set limited discoverable on - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 1 left
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 1 - test passed Set limited discoverable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 1 - teardown complete Set limited discoverable on - Success 1 - done

Set limited discoverable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 2 - setup complete Set limited discoverable on - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
Test condition complete, 1 left
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 2 - test passed Set limited discoverable on - Success 2 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 2 - teardown complete Set limited discoverable on - Success 2 - done

Set limited discoverable on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 3 - setup complete Set limited discoverable on - Success 3 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 3 - test passed Set limited discoverable on - Success 3 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 3 - teardown complete Set limited discoverable on - Success 3 - done

Set limited discoverable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on (LE) - Success 1 - setup complete Set limited discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - test passed Set limited discoverable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on (LE) - Success 1 - teardown complete Set limited discoverable on (LE) - Success 1 - done

Set link security on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 1 - setup
Set link security on - Success 1 - setup complete
Set link security on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a0 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 1 - test passed
Set link security on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Success 1 - teardown complete Set link security on - Success 1 - done

Set link security on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security on - Success 2 - setup complete
Set link security on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 2 - test passed
Set link security on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security on - Success 2 - teardown complete Set link security on - Success 2 - done

Set link security on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security on - Success 3 - setup complete
Set link security on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 3 - test passed
Set link security on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security on - Success 3 - teardown complete Set link security on - Success 3 - done

Set link security on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 1 - setup Set link security on - Invalid parameters 1 - setup complete Set link security on - Invalid parameters 1 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 1 - test passed Set link security on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 1 - teardown complete Set link security on - Invalid parameters 1 - done

Set link security on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 2 - setup Set link security on - Invalid parameters 2 - setup complete Set link security on - Invalid parameters 2 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 2 - test passed Set link security on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 2 - teardown complete Set link security on - Invalid parameters 2 - done

Set link security on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 3 - setup Set link security on - Invalid parameters 3 - setup complete Set link security on - Invalid parameters 3 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 3 - test passed Set link security on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 3 - teardown complete Set link security on - Invalid parameters 3 - done

Set link security on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid index - setup Set link security on - Invalid index - setup complete Set link security on - Invalid index - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Index (0x11) Test condition complete, 0 left
Set link security on - Invalid index - test passed Set link security on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid index - teardown complete Set link security on - Invalid index - done

Set link security off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security off - Success 1 - setup complete Set link security off - Success 1 - run
Registering new settings notification Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 1 - test passed Set link security off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security off - Success 1 - teardown complete Set link security off - Success 1 - done

Set link security off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security off - Success 2 - setup complete Set link security off - Success 2 - run
Registering new settings notification Test condition added, total 1 Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000081 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 2 - test passed Set link security off - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security off - Success 2 - teardown complete Set link security off - Success 2 - done

Set SSP on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 1 - setup
Set SSP on - Success 1 - setup complete
Set SSP on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 2
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c0 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 1 - test passed
Set SSP on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Success 1 - teardown complete
Set SSP on - Success 1 - done

Set SSP on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set SSP on - Success 2 - setup complete
Set SSP on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c1 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 2 - test passed
HCI Command 0x0c52 length 241
Set SSP on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set SSP on - Success 2 - teardown complete
Set SSP on - Success 2 - done

Set SSP on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set SSP on - Success 3 - setup complete
Set SSP on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
HCI Command 0x0c52 length 241
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set SSP on - Success 3 - test passed
Set SSP on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set SSP on - Success 3 - teardown complete
Set SSP on - Success 3 - done

Set SSP on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 1 - setup
Set SSP on - Invalid parameters 1 - setup complete Set SSP on - Invalid parameters 1 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 1 - test passed
Set SSP on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 1 - teardown complete Set SSP on - Invalid parameters 1 - done

Set SSP on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 2 - setup
Set SSP on - Invalid parameters 2 - setup complete Set SSP on - Invalid parameters 2 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 2 - test passed
Set SSP on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 2 - teardown complete Set SSP on - Invalid parameters 2 - done

Set SSP on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 3 - setup
Set SSP on - Invalid parameters 3 - setup complete Set SSP on - Invalid parameters 3 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 3 - test passed
Set SSP on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 3 - teardown complete Set SSP on - Invalid parameters 3 - done

Set SSP on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid index - setup
Set SSP on - Invalid index - setup complete
Set SSP on - Invalid index - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Index (0x11) Test condition complete, 0 left
Set SSP on - Invalid index - test passed
Set SSP on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid index - teardown complete
Set SSP on - Invalid index - done

Set Secure Connections on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Success 1 - setup complete Set Secure Connections on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d) Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 1 - test passed Set Secure Connections on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Success 1 - teardown complete Set Secure Connections on - Success 1 - done

Set Secure Connections on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Success 2 - setup complete Set Secure Connections on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d) Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 2 - test passed Set Secure Connections on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Success 2 - teardown complete Set Secure Connections on - Success 2 - done

Set Secure Connections on - Invalid params 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 1 - setup complete Set Secure Connections on - Invalid params 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 1 - test passed Set Secure Connections on - Invalid params 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 1 - teardown complete Set Secure Connections on - Invalid params 1 - done

Set Secure Connections on - Invalid params 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 2 - setup complete Set Secure Connections on - Invalid params 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 2 - test passed Set Secure Connections on - Invalid params 2 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 2 - teardown complete Set Secure Connections on - Invalid params 2 - done

Set Secure Connections on - Invalid params 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 3 - setup complete Set Secure Connections on - Invalid params 3 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 3 - test passed Set Secure Connections on - Invalid params 3 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 3 - teardown complete Set Secure Connections on - Invalid params 3 - done

Set Secure Connections on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid index - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid index - setup complete Set Secure Connections on - Invalid index - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Index (0x11) Test condition complete, 0 left
Set Secure Connections on - Invalid index - test passed Set Secure Connections on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid index - teardown complete Set Secure Connections on - Invalid index - done

Set Secure Connections on - Not supported 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Not supported 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Not supported 1 - setup complete Set Secure Connections on - Not supported 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 1 - test passed Set Secure Connections on - Not supported 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Not supported 1 - teardown complete Set Secure Connections on - Not supported 1 - done

Set Secure Connections on - Not supported 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Not supported 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Not supported 2 - setup complete Set Secure Connections on - Not supported 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 2 - test passed Set Secure Connections on - Not supported 2 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Not supported 2 - teardown complete Set Secure Connections on - Not supported 2 - done

Set Secure Connections Only on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections Only on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections Only on - Success 1 - setup complete Set Secure Connections Only on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d)
Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 1 - test passed Set Secure Connections Only on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections Only on - Success 1 - teardown complete Set Secure Connections Only on - Success 1 - done

Set Secure Connections Only on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections Only on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections Only on - Success 2 - setup complete Set Secure Connections Only on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d)
Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 2 - test passed Set Secure Connections Only on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Secure Connections Only on - Success 2 - teardown complete Set Secure Connections Only on - Success 2 - done

Set High Speed on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Success - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Success - done

Set High Speed on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 1 - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 1 - done

Set High Speed on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 2 - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 2 - done

Set High Speed on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 3 - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 3 - done

Set High Speed on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid index - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid index - done

Set Low Energy on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 1 - setup
Set Low Energy on - Success 1 - setup complete
Set Low Energy on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Low Energy (0x000d)
Test condition added, total 2
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 1 - test passed
Set Low Energy on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 1 - teardown complete
Set Low Energy on - Success 1 - done

Set Low Energy on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Low Energy on - Success 2 - setup complete
Set Low Energy on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Low Energy (0x000d)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 2 - test passed
HCI Command 0x2008 length 32
Set Low Energy on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 2 - teardown complete
Set Low Energy on - Success 2 - done

Set Low Energy on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Low Energy on - Success 3 - setup complete
Set Low Energy on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
HCI Command 0x2008 length 32
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 3 - test passed
Set Low Energy on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 3 - teardown complete
Set Low Energy on - Success 3 - done

Set Low Energy on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 1 - setup Set Low Energy on - Invalid parameters 1 - setup complete Set Low Energy on - Invalid parameters 1 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 1 - test passed Set Low Energy on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 1 - teardown complete Set Low Energy on - Invalid parameters 1 - done

Set Low Energy on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 2 - setup Set Low Energy on - Invalid parameters 2 - setup complete Set Low Energy on - Invalid parameters 2 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 2 - test passed Set Low Energy on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 2 - teardown complete Set Low Energy on - Invalid parameters 2 - done

Set Low Energy on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 3 - setup Set Low Energy on - Invalid parameters 3 - setup complete Set Low Energy on - Invalid parameters 3 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 3 - test passed Set Low Energy on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 3 - teardown complete Set Low Energy on - Invalid parameters 3 - done

Set Low Energy on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid index - setup Set Low Energy on - Invalid index - setup complete Set Low Energy on - Invalid index - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Index (0x11) Test condition complete, 0 left
Set Low Energy on - Invalid index - test passed Set Low Energy on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid index - teardown complete Set Low Energy on - Invalid index - done

Set Advertising on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Success 1 - setup complete
Set Advertising on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000680 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 1 - test passed
Set Advertising on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Success 1 - teardown complete Set Advertising on - Success 1 - done

Set Advertising on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Success 2 - setup complete
Set Advertising on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Advertising (0x0029)
Test condition added, total 3
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Test condition complete, 2 left
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000681 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 2 - test passed
Set Advertising on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Advertising on - Success 2 - teardown complete Set Advertising on - Success 2 - done

Set Advertising on - Rejected 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Rejected 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Rejected 1 - setup complete
Set Advertising on - Rejected 1 - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Rejected (0x0b)
Test condition complete, 0 left
Set Advertising on - Rejected 1 - test passed
Set Advertising on - Rejected 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Rejected 1 - teardown complete Set Advertising on - Rejected 1 - done

Set Advertising on - Appearance 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Appearance 1 - setup
Initial settings completed
Setup sending Set Appearance (0x0043) Test setup condition added, total 1
Test setup condition complete, 0 left
Set Advertising on - Appearance 1 - setup complete Set Advertising on - Appearance 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Appearance 1 - test passed Set Advertising on - Appearance 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Appearance 1 - teardown complete Set Advertising on - Appearance 1 - done

Set Advertising on - Local name 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Local name 1 - setup
Initial settings completed
Setup sending Set Local Name (0x000f) Test setup condition added, total 1
Test setup condition complete, 0 left
Set Advertising on - Local name 1 - setup complete Set Advertising on - Local name 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Local name 1 - test passed Set Advertising on - Local name 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Local name 1 - teardown complete Set Advertising on - Local name 1 - done

Set Advertising on - Name + Appear 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Name + Appear 1 - setup
Initial settings completed
Sending setup opcode array
Setup sending Set Appearance (0x0043)
Test setup condition added, total 1
Setup sending Set Local Name (0x000f)
Test setup condition added, total 2
Test setup condition complete, 1 left
Test setup condition complete, 0 left
Set Advertising on - Name + Appear 1 - setup complete Set Advertising on - Name + Appear 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Name + Appear 1 - test passed Set Advertising on - Name + Appear 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Name + Appear 1 - teardown complete Set Advertising on - Name + Appear 1 - done

Set BR/EDR off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set BR/EDR off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set BR/EDR off - Success 1 - setup complete
Set BR/EDR off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set BR/EDR (0x002a)
Test condition added, total 2
Set BR/EDR (0x002a): Success (0x00)
Test condition complete, 1 left
New settings 0x00000200 received
Unregistering new settings notification
Test condition complete, 0 left
Set BR/EDR off - Success 1 - test passed
Set BR/EDR off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set BR/EDR off - Success 1 - teardown complete
Set BR/EDR off - Success 1 - done

Set BR/EDR on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set BR/EDR on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set BR/EDR on - Success 1 - setup complete
Set BR/EDR on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set BR/EDR (0x002a)
Test condition added, total 2
Set BR/EDR (0x002a): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set BR/EDR on - Success 1 - test passed
Set BR/EDR on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set BR/EDR on - Success 1 - teardown complete
Set BR/EDR on - Success 1 - done

Set BR/EDR on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f

5 lines not shown · raw message

13,146 lines not shown · raw message

Part of this message is not shown here. View the raw message.