Skip to contentSkip to conversation

ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

PATCH Applied Lukasz Majewski 3 participants 4 messages Dec 9, 2020 – Jan 7, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

From: Mans Rullgard <[email protected]>

Add pinmux setting for USB1 overcurrent on pwm2 pad.

---
Changes for v2:
- Add S-o-B

---
 arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm/boot/dts/imx28.dtsi +10 -0
index bbe52150b165..84d0176d5193 100644
@@ -948,6 +948,16 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				usb1_pins_b: usb1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				usb0_id_pins_a: usb0id@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
Signature · 1 line
2.20.1
#1 lore raw

Hi Shawn,

Quoted 4 lines

From: Mans Rullgard <[email protected]>

Add pinmux setting for USB1 overcurrent on pwm2 pad.

Gentle ping on this patch.

Quoted 29 lines

---
Changes for v2:
- Add S-o-B

---
 arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
(quoted diff) +0 -0

b/arch/arm/boot/dts/imx28.dtsi index bbe52150b165..84d0176d5193 100644

arch/arm/boot/dts/imx28.dtsi +4 -0
@@ -948,6 +948,16 @@
 					fsl,pull-up =
 <MXS_PULL_DISABLE>; };
 
+				usb1_pins_b: usb1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+

MX28_PAD_PWM2__USB1_OVERCURRENT

arch/arm/boot/dts/imx28.dtsi +2 -0
+					>;
+					fsl,drive-strength =

<MXS_DRIVE_12mA>;

arch/arm/boot/dts/imx28.dtsi +1 -0
+					fsl,voltage =

<MXS_VOLTAGE_HIGH>;

arch/arm/boot/dts/imx28.dtsi +1 -0
+					fsl,pull-up =

<MXS_PULL_DISABLE>;

arch/arm/boot/dts/imx28.dtsi line 963

Quoted 5 lines
arch/arm/boot/dts/imx28.dtsi +2 -0
+				};
+
 				usb0_id_pins_a: usb0id@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]