arm64: dts: meson: add support for Beelink GS-King-X
Subsystems (2)
v2 cover arm64: dts: meson: add support for Beelink GS-King-X
This series adds bindings and device-tree for the Beelink (AZW) GS-King-X, which like GT-King and GT-King Pro is based on the W400 reference design.
Changes since v1:
- move audio from TDM_B to TDM_A
- drop S/PDIF content
- add Rob's bindings ack
Christian Hewitt (2):
dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
arm64: dts: meson: add initial Beelink GS-King-X device-tree
.../devicetree/bindings/arm/amlogic.yaml | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-g12b-gsking-x.dts | 133 ++++++++++++++++++ 3 files changed, 135 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
Signature · 7 lines
2.17.1 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
PATCH v2 1/2 dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip.
--- Documentation/devicetree/bindings/arm/amlogic.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/amlogic.yaml +1 -0
@@ -151,6 +151,7 @@ properties: - description: Boards with the Amlogic Meson G12B S922X SoC items: - enum: + - azw,gsking-x - azw,gtking - azw,gtking-pro - hardkernel,odroid-n2
Signature · 7 lines
2.17.1 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
Re: [PATCH v2 1/2] dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
Quoted 6 lines · Christian Hewitt
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip.
Signed-off-by Christian Hewitt <[email protected]>Acked-by Rob Herring <[email protected]>
_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
PATCH v2 2/2 arm64: dts: meson: add initial Beelink GS-King-X device-tree
In reply to Christian HewittThe Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip.
- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- S/PDIF optical output
- 2x ESS9018 audio DACs
- 4x Ricor RT6862 audio amps
- Analogue headphone output
- 1x USB 2.0 OTG port
- 3x USB 3.0 ports
- IR receiver
- 1x micro SD card slot (internal)
- USB SATA controller with 2x 3.5" drive bays
- 1x Power on/off button
--- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-g12b-gsking-x.dts | 133 ++++++++++++++++++ 2 files changed, 134 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
arch/arm64/boot/dts/amlogic/Makefile +1 -0
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts new file +133 -0
133 lines not on this page · raw message
Signature · 7 lines
2.17.1 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
Re: [PATCH v2 2/2] arm64: dts: meson: add initial Beelink GS-King-X device-tree
Quoted 10 lines · Christian Hewitt
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip.
- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- S/PDIF optical output
are you planning to enable this also?
Quoted 3 lines
- 2x ESS9018 audio DACs
- 4x Ricor RT6862 audio amps
- Analogue headphone output
there's no driver for that DAC so I think that's why you are not enabling them
Quoted 8 lines
- 1x USB 2.0 OTG port
- 3x USB 3.0 ports
- IR receiver
- 1x micro SD card slot (internal)
- USB SATA controller with 2x 3.5" drive bays
- 1x Power on/off buttonSigned-off-by Christian Hewitt <[email protected]>
I don't know/have this board but also I don't see anything problematic so:
_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
Re: [PATCH v2 2/2] arm64: dts: meson: add initial Beelink GS-King-X device-tree
Quoted 9 lines · Martin Blumenstingl
Quoted 4 lines · Christian Hewitt
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip.
Quoted 7 lines
Quoted 6 lines
- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- S/PDIF optical outputare you planning to enable this also?
I plan to add this later (after v1 comments).
Quoted 4 lines
Quoted 3 lines
- 2x ESS9018 audio DACs
- 4x Ricor RT6862 audio amps
- Analogue headphone outputthere's no driver for that DAC so I think that's why you are not enabling them
ESS9018 is used with some Raspberry Pi DAC boards so there may be some prior art to build upon. However it’s not clear (even with schematics) how the DAC and AMP are controlled (they look like dumb input/output devices) so this is still to be explored.
Quoted 10 lines
Quoted 8 lines
- 1x USB 2.0 OTG port
- 3x USB 3.0 ports
- IR receiver
- 1x micro SD card slot (internal)
- USB SATA controller with 2x 3.5" drive bays
- 1x Power on/off buttonSigned-off-by Christian Hewitt <[email protected]>I don't know/have this board but also I don't see anything problematic so:
Thx!
_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
Re: [PATCH v2 2/2] arm64: dts: meson: add initial Beelink GS-King-X device-tree
In reply to Christian HewittQuoted 168 lines · Christian Hewitt
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip.
- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- S/PDIF optical output
- 2x ESS9018 audio DACs
- 4x Ricor RT6862 audio amps
- Analogue headphone output
- 1x USB 2.0 OTG port
- 3x USB 3.0 ports
- IR receiver
- 1x micro SD card slot (internal)
- USB SATA controller with 2x 3.5" drive bays
- 1x Power on/off buttonSigned-off-by Christian Hewitt <[email protected]>--- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-g12b-gsking-x.dts | 133 ++++++++++++++++++ 2 files changed, 134 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dtsarch/arm64/boot/dts/amlogic/Makefile +1
-0@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtbarch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts new file +123
-0@@ -0,0 +1,133 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <[email protected]> + * Copyright (c) 2019 Christian Hewitt <[email protected]> + */ + +/dts-v1/; + +#include "meson-g12b-w400.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "azw,gsking-x", "amlogic,g12b"; + model = "Beelink GS-King X"; + + aliases { + rtc0 = &rtc; + rtc1 = &vrtc; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12B-GSKING-X"; + audio-aux-devs = <&tdmout_a>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1", + "TDMOUT_A IN 1", "FRDDR_B OUT 1", + "TDMOUT_A IN 2", "FRDDR_C OUT 1", + "TDM_A Playback", "TDMOUT_A OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + wakeup-source; + }; +}; + +&tdmif_a {
arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts line 133
Quoted 10 lines
arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts new file +10
-0+ status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +};
_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic