Skip to contentSkip to conversation

arm64: dts: meson: add support for Beelink GS-King-X

PATCH Applied Christian Hewitt 2 participants 4 messages Jan 19, 2021 – Jan 25, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover arm64: dts: meson: add support for Beelink GS-King-X

This series adds bindings and device-tree for the Beelink (AZW) GS-King-X, which like GT-King and GT-King Pro is based on the W400 reference design.

Changes since v2:
- shorten audio card name to GSKING-X
- add Neil's tested-by
- add Martin's reviews

Changes since v1:
- move audio from TDM_B to TDM_A
- drop S/PDIF content
- add Rob's bindings ack

Christian Hewitt (2):
dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
arm64: dts: meson: add initial Beelink GS-King-X device-tree

 .../devicetree/bindings/arm/amlogic.yaml      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../boot/dts/amlogic/meson-g12b-gsking-x.dts  | 133 ++++++++++++++++++
 3 files changed, 135 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#1 lore raw

PATCH v3 1/2 dt-bindings: arm: amlogic: add support for the Beelink GS-King-X

The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip.

---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/amlogic.yaml +1 -0
index 3341788d1096..6bef60ddda64 100644
@@ -151,6 +151,7 @@ properties:
       - description: Boards with the Amlogic Meson G12B S922X SoC
         items:
           - enum:
+              - azw,gsking-x
               - azw,gtking
               - azw,gtking-pro
               - hardkernel,odroid-n2
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#2 lore raw

PATCH v3 2/2 arm64: dts: meson: add initial Beelink GS-King-X device-tree

In reply to Christian Hewitt

The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip.

- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- S/PDIF optical output
- 2x ESS9018 audio DACs
- 4x Ricor RT6862 audio amps
- Analogue headphone output
- 1x USB 2.0 OTG port
- 3x USB 3.0 ports
- IR receiver
- 1x micro SD card slot (internal)
- USB SATA controller with 2x 3.5" drive bays
- 1x Power on/off button

---
Single change since v2 to shorten the audio card name to align with the audio card name changes submitted in [0] (no dependency on the patch).

[0] https://patchwork.kernel.org/project/linux-amlogic/patch/[email protected]/

 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../boot/dts/amlogic/meson-g12b-gsking-x.dts  | 133 ++++++++++++++++++
 2 files changed, 134 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
arch/arm64/boot/dts/amlogic/Makefile +1 -0
index ced03946314f..dce41cd3f347 100644
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts new file +133 -0

133 lines not on this page · raw message

Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
maintainer Applied
#3 lore raw
In reply to Christian Hewitt
Quoted 9 lines · Christian Hewitt

This series adds bindings and device-tree for the Beelink (AZW) GS-King-X, which like GT-King and GT-King Pro is based on the W400 reference design.

Changes since v2:
- shorten audio card name to GSKING-X
- add Neil's tested-by
- add Martin's reviews

[...]

Applied, thanks!

[1/2] dt-bindings: arm: amlogic: add support for the Beelink GS-King-X

      commit: 39f5e36d5d2b5cae17cfac1f2cd038f0f8bc834b
[2/2] arm64: dts: meson: add initial Beelink GS-King-X device-tree
      commit: f3d4ad4f106e21161d232c41a6676416e2498ae4

Best regards,

Signature · 6 lines
Kevin Hilman <[email protected]>

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic