Add support for ECDSA image signing (with test)
Subsystems (2)
v2 cover Add support for ECDSA image signing (with test)
# Introduction
This series is part of a larger effort to implement verified boot on STM32MP1.The purpose of this series is to let people know I'm looking into ECDSA.
## Purpose and intent
The ROM code on the STM32MP requires an ECDSA-signed FSBL. Maintaining verified boot through FIT images would require switching to an RSA key after SPL. This would be stupid, so this series is focused on enabling ECDSA signing. The use case that I am focused on is signing an existing FIT image:
mkimage -F some-existing.fit --signing-key some/key.pem
I don't care about signing while assembling the FIT. The reason is that I want the machine that builds things to be separate from the machine that has access to the super-secret-key.pem.
Astute readers may have noticed the "uselessness" of this series due to the lack of a device-side implementation. I don't plan to write out the algorithm for ECDSA, but instead use the CRYP engine of the stm32mp, or the ROM services. This is a matter for another series.
# Implementation
I initially tried to model this after the RSA implementation (rsa-sign.c), but that didn't go well for a few reasons:
(a) The openssl/libcrypto API is a pain in the ass
(b) The RSA path doesn't have a way to pass a specific key file.
On point (a), I don't want to spend too much time battling a C API for crypto. I find pyCryptodomex to be vastly superior, but that is not available for mkimage. I am thus focusing on the simple case of key in, signature out.
On point (b), the RSA path takes the FDT property 'key-name-hint' to decide which key file to read from disk. In the context of "which fdt node describes my signing key", this makes sense. On the other hand, 'key-name-hint' is also used as the basename of where the key is on the filesystem. This leads to some funny search paths, such as
"some/dir/(null).key"
So I am using the -K option to mkimage as the _full_ path to the key file. It doesn't have to be named .key, it doesn't have to be named .crt, and it doesn't have to exist in a particular directory (as is the case for the RSA path). Take that as is for here -- we can discuss the merits of this in a separate thread.
A bonus point is that I have decided to keep signin/verifying in the same source file. This allows me to reuse some helper functions. I'm only adding 300 lines of code, so I don't see the point in splitting it up.
# Testing
test/py/tests/test_fit_ecdsa.py is implementing a test for mkimage. It lets mkimage run wild, tehn verifies the signature against pyCryptodomex -- see earlier point on for I didn't use openssl.
Alexandru Gagniuc (5):
lib: Rename rsa-checksum.c to hash-checksum.c lib/rsa: Make fdt_add_bignum() available outside of RSA code
lib: Add support for ECDSA image signing
doc: signature.txt: Document devicetree format for ECDSA keys test/py: ecdsa: Add test for mkimage ECDSA signing
common/image-fit-sig.c | 2 +-
common/image-sig.c | 16 +-
doc/uImage.FIT/signature.txt | 7 +-
include/image.h | 2 +-
include/u-boot/ecdsa.h | 27 ++
include/u-boot/fdt-libcrypto.h | 15 +
.../{rsa-checksum.h => hash-checksum.h} | 0
lib/Makefile | 1 +
lib/crypto/pkcs7_verify.c | 2 +-
lib/crypto/x509_public_key.c | 2 +-
lib/ecdsa/ecdsa-libcrypto.c | 300 ++++++++++++++++++
lib/fdt-libcrypto.c | 72 +++++
lib/{rsa/rsa-checksum.c => hash-checksum.c} | 3 +-
lib/rsa/Makefile | 2 +-
lib/rsa/rsa-sign.c | 65 +---
test/py/tests/test_fit_ecdsa.py | 111 +++++++
tools/Makefile | 7 +-
17 files changed, 559 insertions(+), 75 deletions(-)
create mode 100644 include/u-boot/ecdsa.h
create mode 100644 include/u-boot/fdt-libcrypto.h
rename include/u-boot/{rsa-checksum.h => hash-checksum.h} (100%)
create mode 100644 lib/ecdsa/ecdsa-libcrypto.c
create mode 100644 lib/fdt-libcrypto.c
rename lib/{rsa/rsa-checksum.c => hash-checksum.c} (96%)
create mode 100644 test/py/tests/test_fit_ecdsa.pySignature · 1 line
2.26.2
RFC PATCH v2 1/5 lib: Rename rsa-checksum.c to hash-checksum.c
rsa-checksum.c sontains the hash_calculate() implementations. Despite the "rsa-" file prefix, this function is useful for other algorithms.
To prevent confusion, move this file to lib/crypto, and rename it to hash-checksum.c, to give it a more "generic" feel.
---
common/image-fit-sig.c | 2 +-
common/image-sig.c | 2 +-
include/image.h | 2 +-
include/u-boot/{rsa-checksum.h => hash-checksum.h} | 0
lib/Makefile | 1 +
lib/crypto/pkcs7_verify.c | 2 +-
lib/crypto/x509_public_key.c | 2 +-
lib/{rsa/rsa-checksum.c => hash-checksum.c} | 3 ++-
lib/rsa/Makefile | 2 +-
tools/Makefile | 3 ++-
10 files changed, 11 insertions(+), 8 deletions(-)
rename include/u-boot/{rsa-checksum.h => hash-checksum.h} (100%)
rename lib/{rsa/rsa-checksum.c => hash-checksum.c} (96%)common/image-fit-sig.c +1 -1
@@ -15,7 +15,7 @@ DECLARE_GLOBAL_DATA_PTR;#include <fdt_region.h> #include <image.h> #include <u-boot/rsa.h> -#include <u-boot/rsa-checksum.h> +#include <u-boot/hash-checksum.h> #define IMAGE_MAX_HASHED_NODES 100
common/image-sig.c +1 -1
@@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR;#endif /* !USE_HOSTCC*/ #include <image.h> #include <u-boot/rsa.h> -#include <u-boot/rsa-checksum.h> +#include <u-boot/hash-checksum.h> #define IMAGE_MAX_HASHED_NODES 100
include/image.h +1 -1
@@ -1258,7 +1258,7 @@ struct image_region { };#if IMAGE_ENABLE_VERIFY -# include <u-boot/rsa-checksum.h> +# include <u-boot/hash-checksum.h> #endif struct checksum_algo {const char *name;
include/u-boot/hash-checksum.h renamed from include/u-boot/rsa-checksum.h +0 -0
lib/Makefile +1 -0
@@ -60,6 +60,7 @@ endif obj-$(CONFIG_$(SPL_)ACPIGEN) += acpi/ obj-$(CONFIG_$(SPL_)MD5) += md5.o obj-$(CONFIG_$(SPL_)RSA) += rsa/ +obj-$(CONFIG_FIT_SIGNATURE) += hash-checksum.o obj-$(CONFIG_SHA1) += sha1.o obj-$(CONFIG_SHA256) += sha256.o obj-$(CONFIG_SHA512_ALGO) += sha512.o
lib/crypto/pkcs7_verify.c +1 -1
@@ -15,7 +15,7 @@#include <linux/bitops.h> #include <linux/compat.h> #include <linux/asn1.h> -#include <u-boot/rsa-checksum.h> +#include <u-boot/hash-checksum.h> #include <crypto/public_key.h> #include <crypto/pkcs7_parser.h> #else
lib/crypto/x509_public_key.c +1 -1
@@ -19,7 +19,7 @@#include <linux/kernel.h> #ifdef __UBOOT__#include <crypto/x509_parser.h> -#include <u-boot/rsa-checksum.h> +#include <u-boot/hash-checksum.h> #else #include <linux/slab.h> #include <keys/asymmetric-subtype.h>
lib/hash-checksum.c renamed from lib/rsa/rsa-checksum.c +2 -1
@@ -13,7 +13,8 @@#else #include "fdt_host.h" #endif -#include <u-boot/rsa.h> +#include <hash.h> +#include <image.h> int hash_calculate(const char *name, const struct image_region region[],
lib/rsa/Makefile +1 -1
@@ -5,6 +5,6 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd at denx.de. -obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o +obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
tools/Makefile +2 -1
@@ -67,7 +67,7 @@ LIBFDT_OBJS := $(addprefix libfdt/, fdt.o fdt_ro.o fdt_wip.o fdt_sw.o fdt_rw.o \ fdt_strerror.o fdt_empty_tree.o fdt_addresses.o fdt_overlay.o) RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \ - rsa-sign.o rsa-verify.o rsa-checksum.o \ + rsa-sign.o rsa-verify.o \ rsa-mod-exp.o) AES_OBJS-$(CONFIG_FIT_CIPHER) := $(addprefix lib/aes/, \
@@ -105,6 +105,7 @@ dumpimage-mkimage-objs := aisimage.o \ $(ROCKCHIP_OBS) \ socfpgaimage.o \ lib/crc16.o \ + lib/hash-checksum.o \ lib/sha1.o \ lib/sha256.o \ lib/sha512.o \
Signature · 1 line
2.26.2
RFC PATCH v2 1/5 lib: Rename rsa-checksum.c to hash-checksum.c
Hi Alexandru,
Quoted 6 lines · Alexandru Gagniuc
rsa-checksum.csontains thehash_calculate()implementations. Despite the "rsa-" file prefix, this function is useful for other algorithms.To prevent confusion, move this file to lib/crypto, and rename it to
hash-checksum.c, to give it a more "generic" feel.
It looks like it is moving to lib/ ?
Quoted 16 lines
Signed-off-by Alexandru Gagniuc <[email protected]>--- common/image-fit-sig.c | 2 +- common/image-sig.c | 2 +- include/image.h | 2 +- include/u-boot/{rsa-checksum.h => hash-checksum.h} | 0 lib/Makefile | 1 + lib/crypto/pkcs7_verify.c | 2 +- lib/crypto/x509_public_key.c | 2 +- lib/{rsa/rsa-checksum.c => hash-checksum.c} | 3 ++- lib/rsa/Makefile | 2 +- tools/Makefile | 3 ++- 10 files changed, 11 insertions(+), 8 deletions(-) rename include/u-boot/{rsa-checksum.h => hash-checksum.h} (100%) rename lib/{rsa/rsa-checksum.c => hash-checksum.c} (96%)
RFC PATCH v2 2/5 lib/rsa: Make fdt_add_bignum() available outside of RSA code
In reply to Alexandru Gagniucfdt_add_bignum() is useful for algorithms other than just RSA. To allow its use for ECDSA, move it to a common file under lib/.
The new file is suffixed with '-libcrypto' because it has a direct dependency on openssl. This is due to the use of the "BIGNUM *" type.
--- include/u-boot/fdt-libcrypto.h | 15 +++++++ lib/fdt-libcrypto.c | 72 ++++++++++++++++++++++++++++++++++ lib/rsa/rsa-sign.c | 65 +----------------------------- tools/Makefile | 1 + 4 files changed, 89 insertions(+), 64 deletions(-) create mode 100644 include/u-boot/fdt-libcrypto.h create mode 100644 lib/fdt-libcrypto.c
include/u-boot/fdt-libcrypto.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]> +* Copyright (c) 2013, Google Inc. +*/ + +#ifndef _FDT_LIBCRYPTO_H +#define _FDT_LIBCRYPTO_H + +#include <openssl/bn.h> + +int fdt_add_bignum (void *blob,int noffset,const char *prop_name, +BIGNUM *num,int num_bits); + +#endif /* _FDT_LIBCRYPTO_H */
lib/fdt-libcrypto.c new file +72 -0
72 lines not on this page · raw message
lib/rsa/rsa-sign.c +1 -64
77 lines not on this page · raw message
tools/Makefile +1 -0
@@ -106,6 +106,7 @@ dumpimage-mkimage-objs := aisimage.o \ socfpgaimage.o \ lib/crc16.o \ lib/hash-checksum.o \ + lib/fdt-libcrypto.o \ lib/sha1.o \ lib/sha256.o \ lib/sha512.o \
Signature · 1 line
2.26.2
RFC PATCH v2 2/5 lib/rsa: Make fdt_add_bignum() available outside of RSA code
Hi Alexandru,
Quoted 8 lines · Alexandru Gagniuc
fdt_add_bignum()is useful for algorithms other than just RSA. To allow its use for ECDSA, move it to a common file underlib/.The new file is suffixed with '-libcrypto' because it has a direct dependency on openssl. This is due to the use of the "BIGNUM *" type.
Signed-off-by Alexandru Gagniuc <[email protected]>
Quoted 8 lines
--- include/u-boot/fdt-libcrypto.h | 15 +++++++ lib/fdt-libcrypto.c | 72 ++++++++++++++++++++++++++++++++++ lib/rsa/rsa-sign.c | 65 +----------------------------- tools/Makefile | 1 + 4 files changed, 89 insertions(+), 64 deletions(-) create mode 100644 include/u-boot/fdt-libcrypto.h create mode 100644 lib/fdt-libcrypto.c
Quoted 10 lines
include/u-boot/fdt-libcrypto.h new file +3
-0@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]>
include/u-boot/fdt-libcrypto.h line 13
Quoted 10 lines
include/u-boot/fdt-libcrypto.h new file +10
-0+* Copyright (c) 2013, Google Inc. +*/ + +#ifndef _FDT_LIBCRYPTO_H +#define _FDT_LIBCRYPTO_H + +#include <openssl/bn.h> + +int fdt_add_bignum (void *blob,int noffset,const char *prop_name, +BIGNUM *num,int num_bits);
Please add a full function comment.
Regards,
Simon
RFC PATCH v2 3/5 lib: Add support for ECDSA image signing
In reply to Alexandru Gagniucmkimage supports rsa2048, and rsa4096 signatures. With newer silicon now supporting hardware-accelerated ECDSA, it makes sense to expand signing support to elliptic curves.
Implement host-side ECDSA signing and verification with libcrypto. Device-side implementation of signature verification is beyond the scope of this patch.
--- common/image-sig.c | 14 +- include/u-boot/ecdsa.h | 27 ++++ lib/ecdsa/ecdsa-libcrypto.c | 300 ++++++++++++++++++++++++++++++++++++ tools/Makefile | 3 + 4 files changed, 342 insertions(+), 2 deletions(-) create mode 100644 include/u-boot/ecdsa.h create mode 100644 lib/ecdsa/ecdsa-libcrypto.c
common/image-sig.c +12 -2
@@ -15,6 +15,7 @@DECLARE_GLOBAL_DATA_PTR ;#endif /* !USE_HOSTCC*/ #include <image.h> +#include <u-boot/ecdsa.h> #include <u-boot/rsa.h> #include <u-boot/hash-checksum.h>
@@ -82,8 +83,17 @@ struct crypto_algo crypto_algos[] = { .sign = rsa_sign, .add_verify_data = rsa_add_verify_data, .verify = rsa_verify, - } - + }, +#if defined(USE_HOSTCC) + /* Currently, only host support exists for ECDSA */ + { + .name = "ecdsa256", + .key_len = ECDSA256_BYTES, + .sign = ecdsa_sign, + .add_verify_data = ecdsa_add_verify_data, + .verify = ecdsa_verify, + }, +#endif }; struct padding_algo padding_algos[] = {
include/u-boot/ecdsa.h new file +27 -0
@@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]>. +*/ + +#ifndef _ECDSA_H +#define _ECDSA_H + +#include <errno.h> +#include <image.h> + +/** +* crypto_algo API impementation for ECDSA; +* @see "struct crypto_algo" +* @{ +*/ +int ecdsa_sign (struct image_sign_info *info,const struct image_region region[], +int region_count,uint8_t **sigp,uint *sig_len); +int ecdsa_verify (struct image_sign_info *info, +const struct image_region region[],int region_count, +uint8_t *sig,uint sig_len); +int ecdsa_add_verify_data (struct image_sign_info *info,void *keydest); +/** @} */ + +#define ECDSA256_BYTES (256 / 8) + +#endif
lib/ecdsa/ecdsa-libcrypto.c new file +300 -0
300 lines not on this page · raw message
tools/Makefile +3 -0
@@ -70,6 +70,8 @@ RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \ rsa-sign.o rsa-verify.o \ rsa-mod-exp.o) +ECDSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/ecdsa/, ecdsa-libcrypto.o) + AES_OBJS-$(CONFIG_FIT_CIPHER) := $(addprefix lib/aes/, \ aes-encrypt.o aes-decrypt.o)
@@ -119,6 +121,7 @@ dumpimage-mkimage-objs := aisimage.o \ gpimage.o \ gpimage-common.o \ mtk_image.o \ + $(ECDSA_OBJS-y) \ $(RSA_OBJS-y) \ $(AES_OBJS-y)
Signature · 1 line
2.26.2
RFC PATCH v2 3/5 lib: Add support for ECDSA image signing
Hi Alexandru,
Quoted 69 lines · Alexandru Gagniuc
mkimage supports rsa2048, and rsa4096 signatures. With newer silicon now supporting hardware-accelerated ECDSA, it makes sense to expand signing support to elliptic curves.
Implement host-side ECDSA signing and verification with libcrypto. Device-side implementation of signature verification is beyond the scope of this patch.
Signed-off-by Alexandru Gagniuc <[email protected]>--- common/image-sig.c | 14 +- include/u-boot/ecdsa.h | 27 ++++ lib/ecdsa/ecdsa-libcrypto.c | 300 ++++++++++++++++++++++++++++++++++++ tools/Makefile | 3 + 4 files changed, 342 insertions(+), 2 deletions(-) create mode 100644 include/u-boot/ecdsa.h create mode 100644 lib/ecdsa/ecdsa-libcrypto.ccommon/image-sig.c +12
-2@@ -15,6 +15,7 @@DECLARE_GLOBAL_DATA_PTR ;#endif /* !USE_HOSTCC*/ #include <image.h> +#include <u-boot/ecdsa.h> #include <u-boot/rsa.h> #include <u-boot/hash-checksum.h> @@ -82,8 +83,17 @@ struct crypto_algo crypto_algos[] = { .sign = rsa_sign, .add_verify_data = rsa_add_verify_data, .verify = rsa_verify, - } - + }, +#if defined(USE_HOSTCC) + /* Currently, only host support exists for ECDSA */ + { + .name = "ecdsa256", + .key_len = ECDSA256_BYTES, + .sign = ecdsa_sign, + .add_verify_data = ecdsa_add_verify_data, + .verify = ecdsa_verify, + }, +#endif }; struct padding_algo padding_algos[] = {include/u-boot/ecdsa.h new file +12
-0@@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]>. +*/ + +#ifndef _ECDSA_H +#define _ECDSA_H + +#include <errno.h> +#include <image.h> + +/**
include/u-boot/ecdsa.h line 22
Quoted 10 lines
include/u-boot/ecdsa.h new file +10
-0+* crypto_algo API impementation for ECDSA; +* @see "struct crypto_algo" +* @{ +*/ +int ecdsa_sign (struct image_sign_info *info,const struct image_region region[], +int region_count,uint8_t **sigp,uint *sig_len); +int ecdsa_verify (struct image_sign_info *info, +const struct image_region region[],int region_count, +uint8_t *sig,uint sig_len); +int ecdsa_add_verify_data (struct image_sign_info *info,void *keydest);
Please always add full comments when you export functions, or have a non-trivial static function.
Quoted 11 lines
include/u-boot/ecdsa.h new file +5
-0+/** @} */ + +#define ECDSA256_BYTES (256 / 8) + +#endif lib/ecdsa/ecdsa-libcrypto.c new file +0
-0
lib/ecdsa/ecdsa-libcrypto.c line 10
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0@@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* ECDSA image signing implementation using libcrypto backend +* +* The signature is a binary representation of the (R, S) points, padded to the +* key size. The signature will be (2 * key_size_bits) / 8 bytes. +* +* Deviations from behavior of RSA equivalent: +* - Verification uses private key. This is not technically required, but a +* limitation on how clumsy the openssl API is to use.
I'm not quite sure what the implications are on this. If this is public key crypto, the private key is not available, so how can you verify with it?
lib/ecdsa/ecdsa-libcrypto.c line 13
Quoted 3 lines
lib/ecdsa/ecdsa-libcrypto.c new file +3
-0+* - Handling of keys and key paths: +* - The '-K' key directory option must contain path to the key file, +* instead of the key directory.
If we make this change we should update RSA to do the same.
Quoted 8 lines
lib/ecdsa/ecdsa-libcrypto.c new file +8
-0+* - No assumptions are made about the file extension of the key +* - The 'key-name-hint' property is only used for naming devicetree nodes, +* but is not used for looking up keys on the filesystem. +* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]> +*/ + +#include <u-boot/ecdsa.h>
lib/ecdsa/ecdsa-libcrypto.c line 31
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0+#include <u-boot/fdt-libcrypto.h> +#include <openssl/ssl.h> +#include <openssl/ec.h> +#include <openssl/bn.h> + +struct signer { +EVP_PKEY *evp_key; +EC_KEY *ecdsa_key; +void *hash; +void *signature;/* Do not free() !*/
need comments
Quoted 60 lines
lib/ecdsa/ecdsa-libcrypto.c new file +60
-0+}; + +static int alloc_ctx (struct signer *ctx,const struct image_sign_info *info) +{ +memset (ctx,0 ,sizeof (*ctx)); + +if (!OPENSSL_init_ssl (0 ,NULL )) { +fprintf (stderr,"Failure to init SSL library\n" ); +return -1 ; + } + + ctx->hash =malloc (info->checksum->checksum_len); + ctx->signature =malloc (info->crypto->key_len *2 ); + +if (!ctx->hash || !ctx->signature) +return -1 ; + +return 0 ; +} + +static void free_ctx (struct signer *ctx) +{ +if (ctx->ecdsa_key) +EC_KEY_free (ctx->ecdsa_key); + +if (ctx->evp_key) +EVP_PKEY_free (ctx->evp_key); + +if (ctx->hash) +free (ctx->hash); +} + +/* +* Convert an ECDSA signature to raw format +* +* openssl DER-encodes 'binary' signatures. We want the signature in a raw +* (R, S) point pair. So we have to dance a bit. +*/ +static void ecdsa_sig_encode_raw (void *buf,const ECDSA_SIG *sig,size_t order) +{ +int point_bytes = order; +const BIGNUM *r, *s; +uintptr_t s_buf; + +ECDSA_SIG_get0 (sig, &r, &s); + s_buf = (uintptr_t )buf + point_bytes; +BN_bn2binpad (r, buf, point_bytes); +BN_bn2binpad (s, (void *)s_buf, point_bytes); +} + +static ECDSA_SIG *ecdsa_sig_from_raw (void *buf,size_t order) +{ +int point_bytes = order; +uintptr_t s_buf; +ECDSA_SIG *sig; +BIGNUM *r, *s; + + sig =ECDSA_SIG_new (); +if (!sig) +return NULL ;
lib/ecdsa/ecdsa-libcrypto.c line 101
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0+ + s_buf = (uintptr_t )buf + point_bytes; + r =BN_bin2bn (buf, point_bytes,NULL ); + s =BN_bin2bn ((void *)s_buf, point_bytes,NULL ); +ECDSA_SIG_set0 (sig, r, s); + +return sig; +} + +static size_t ecdsa_key_size_bytes (const EC_KEY *key)
I think all of these functions need a comment.
Quoted 4 lines
lib/ecdsa/ecdsa-libcrypto.c new file +4
-0+{ +const EC_GROUP *group; + + group =EC_KEY_get0_group (key);
lib/ecdsa/ecdsa-libcrypto.c line 115
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0+return EC_GROUP_order_bits (group) /8 ; +} + +static int read_key (struct signer *ctx,const char *key_name) +{ +FILE *f =fopen (key_name,"r" ); + +if (!f) { +fprintf (stderr,"Can not get key file '%s'\n" , key_name); +return -1 ;
return -EIO perhaps?
lib/ecdsa/ecdsa-libcrypto.c line 122
Quoted 7 lines
lib/ecdsa/ecdsa-libcrypto.c new file +7
-0+ } + + ctx->evp_key =PEM_read_PrivateKey (f,NULL ,NULL ,NULL ); +fclose (f); +if (!ctx->evp_key) { +fprintf (stderr,"Can not read key from '%s'\n" , key_name); +return -1 ;
These should return useful error number: -1 is -EPERM which doesn't seem right here.
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0+ } + +if (EVP_PKEY_id (ctx->evp_key) !=EVP_PKEY_EC ) { +fprintf (stderr,"'%s' is not an ECDSA key\n" , key_name); +return -1 ; + } + + ctx->ecdsa_key =EVP_PKEY_get1_EC_KEY (ctx->evp_key); +if (!ctx->ecdsa_key) +fprintf (stderr,"Can not extract ECDSA key\n" );
lib/ecdsa/ecdsa-libcrypto.c line 142
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0+ +return (ctx->ecdsa_key) ?0 :-1 ; +} + +static int prepare_ctx (struct signer *ctx,const struct image_sign_info *info) +{ +const char *kname = info->keydir; +int key_len_bytes; + +if (alloc_ctx (ctx, info) <0 )
That function returns 0 on success, so you don't need the < 0. A comment on the above function would make that clear.
Quoted 5 lines
lib/ecdsa/ecdsa-libcrypto.c new file +5
-0+return -1 ; + +if (read_key (ctx, kname) <0 ) +return -1 ; +
lib/ecdsa/ecdsa-libcrypto.c line 157
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0+ key_len_bytes =ecdsa_key_size_bytes (ctx->ecdsa_key); +if (key_len_bytes != info->crypto->key_len) { +fprintf (stderr,"Expected a %u-bit key, got %u-bit key\n" , + info->crypto->key_len *8 , key_len_bytes *8 ); +return -1 ; + } + +return 0 ; +} +
[..]
Regards,
Simon
RFC PATCH v2 3/5 lib: Add support for ECDSA image signing
Quoted 1 line · Simon Glass
Hi Alexandru,
Hi Simon,
(pun alert!) A lot of your comments have to do with comments. I use comments as a tool to add something of value to code. When the code is self-documenting, comments don't help much.
See kernel coding style chapter 8.
What comments can do, is increase code size and break code flow -- there is a cost to having them. I'm certain you've seen functions that need to be scrolled up and down because of a huge comment smack in the middle. I'll address individual comment comments below.
Quoted 76 lines · Alexandru Gagniuc
Quoted 74 lines
mkimage supports rsa2048, and rsa4096 signatures. With newer silicon now supporting hardware-accelerated ECDSA, it makes sense to expand signing support to elliptic curves.
Implement host-side ECDSA signing and verification with libcrypto. Device-side implementation of signature verification is beyond the scope of this patch.
Signed-off-by Alexandru Gagniuc <[email protected]>--- common/image-sig.c | 14 +- include/u-boot/ecdsa.h | 27 ++++ lib/ecdsa/ecdsa-libcrypto.c | 300 ++++++++++++++++++++++++++++++++++++ tools/Makefile | 3 + 4 files changed, 342 insertions(+), 2 deletions(-)create mode 100644
include/u-boot/ecdsa.h
create mode 100644lib/ecdsa/ecdsa-libcrypto.ccommon/image-sig.c +12
-2@@ -15,6 +15,7 @@DECLARE_GLOBAL_DATA_PTR ;#endif /* !USE_HOSTCC*/ #include <image.h> +#include <u-boot/ecdsa.h> #include <u-boot/rsa.h> #include <u-boot/hash-checksum.h> @@ -82,8 +83,17 @@ struct crypto_algo crypto_algos[] = { .sign = rsa_sign, .add_verify_data = rsa_add_verify_data, .verify = rsa_verify, - } - + }, +#if defined(USE_HOSTCC) + /* Currently, only host support exists for ECDSA */ + { + .name = "ecdsa256", + .key_len = ECDSA256_BYTES, + .sign = ecdsa_sign, + .add_verify_data = ecdsa_add_verify_data, + .verify = ecdsa_verify, + }, +#endif }; struct padding_algo padding_algos[] = {include/u-boot/ecdsa.h new file +17
-0@@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]>. +*/ + +#ifndef _ECDSA_H +#define _ECDSA_H + +#include <errno.h> +#include <image.h> + +/** +* crypto_algo API impementation for ECDSA; +* @see "struct crypt_algo" +* @{ +*/ +int ecdsa_sign(struct image_sign_info *info, const struct image_region region[],
Quoted 8 lines
include/u-boot/ecdsa.h line 22
Quoted 5 lines
include/u-boot/ecdsa.h new file +5
-0+ int region_count, uint8_t **sigp, uint *sig_len); +int ecdsa_verify (struct image_sign_info *info, +const struct image_region region[],int region_count, +uint8_t *sig,uint sig_len); +int ecdsa_add_verify_data (struct image_sign_info *info,void *keydest);Please always add full comments when you export functions, or have a non-trivial static function.
I disagree. These functions implement and are designed to be used via the crypt_algo API. One should understand the crypt_algo API, and any deviations in behavior would be a bug. So there is no scenario in which comments here would be useful.
Quoted 17 lines
Quoted 17 lines
include/u-boot/ecdsa.h new file +5
-0+/** @} */ + +#define ECDSA256_BYTES (256 / 8) + +#endif lib/ecdsa/ecdsa-libcrypto.c new file +6
-0@@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* ECDSA image signing implementation using libcrypto backend +* +* The signature is a binary representation of the (R, S) points, padded to the +* key size. The signature will be (2 * key_size_bits) / 8 bytes.
Quoted 8 lines
lib/ecdsa/ecdsa-libcrypto.c line 10
Quoted 4 lines
lib/ecdsa/ecdsa-libcrypto.c new file +4
-0+* +* Deviations from behavior of RSA equivalent: +* - Verification uses private key. This is not technically required, but a +* limitation on how clumsy the openssl API is to use. I'm not quite sure what the implications are on this. If this is public key crypto, the private key is not available, so how can you verify with it?
I presume this is fixable, but only as an academic exercise. This file is for mkimage, which doesn't do standalone verification. The way you verify is in u-boot. That is the subject of another series.
Quoted 5 lines
lib/ecdsa/ecdsa-libcrypto.c line 13
Quoted 3 lines
lib/ecdsa/ecdsa-libcrypto.c new file +3
-0+* - Handling of keys and key paths: +* - The '-K' key directory option must contain path to the key file, +* instead of the key directory. If we make this change we should update RSA to do the same.
Of course, but is there agreement as to this direction? There seem to be some hidden subtleties to key-name-hint that I don't fully understand yet.
Quoted 12 lines
Quoted 12 lines
lib/ecdsa/ecdsa-libcrypto.c new file +12
-0+* - No assumptions are made about the file extension of the key +* - The 'key-name-hint' property is only used for naming devicetree nodes, +* but is not used for looking up keys on the filesystem. +* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]> +*/ + +#include <u-boot/ecdsa.h> +#include <u-boot/fdt-libcrypto.h> +#include <openssl/ssl.h> +#include <openssl/ec.h> +#include <openssl/bn.h>
Quoted 8 lines
lib/ecdsa/ecdsa-libcrypto.c line 31
Quoted 6 lines
lib/ecdsa/ecdsa-libcrypto.c new file +6
-0+ +struct signer { +EVP_PKEY *evp_key; +EC_KEY *ecdsa_key; +void *hash; +void *signature;/* Do not free() !*/ need comments
Is this for the sake of having comments, or is there something of value that I've missed? The only member that could be confusing is evp_key, but that becomes obvious in the context of libcrypto.
Quoted 64 lines
Quoted 64 lines
lib/ecdsa/ecdsa-libcrypto.c new file +64
-0+}; + +static int alloc_ctx (struct signer *ctx,const struct image_sign_info *info) +{ +memset (ctx,0 ,sizeof (*ctx)); + +if (!OPENSSL_init_ssl (0 ,NULL )) { +fprintf (stderr,"Failure to init SSL library\n" ); +return -1 ; + } + + ctx->hash =malloc (info->checksum->checksum_len); + ctx->signature =malloc (info->crypto->key_len *2 ); + +if (!ctx->hash || !ctx->signature) +return -1 ; + +return 0 ; +} + +static void free_ctx (struct signer *ctx) +{ +if (ctx->ecdsa_key) +EC_KEY_free (ctx->ecdsa_key); + +if (ctx->evp_key) +EVP_PKEY_free (ctx->evp_key); + +if (ctx->hash) +free (ctx->hash); +} + +/* +* Convert an ECDSA signature to raw format +* +* openssl DER-encodes 'binary' signatures. We want the signature in a raw +* (R, S) point pair. So we have to dance a bit. +*/ +static void ecdsa_sig_encode_raw (void *buf,const ECDSA_SIG *sig,size_t order) +{ +int point_bytes = order; +const BIGNUM *r, *s; +uintptr_t s_buf; + +ECDSA_SIG_get0 (sig, &r, &s); + s_buf = (uintptr_t )buf + point_bytes; +BN_bn2binpad (r, buf, point_bytes); +BN_bn2binpad (s, (void *)s_buf, point_bytes); +} + +static ECDSA_SIG *ecdsa_sig_from_raw (void *buf,size_t order) +{ +int point_bytes = order; +uintptr_t s_buf; +ECDSA_SIG *sig; +BIGNUM *r, *s; + + sig =ECDSA_SIG_new (); +if (!sig) +return NULL ; + + s_buf = (uintptr_t )buf + point_bytes; + r =BN_bin2bn (buf, point_bytes,NULL ); + s =BN_bin2bn ((void *)s_buf, point_bytes,NULL );
Quoted 8 lines
lib/ecdsa/ecdsa-libcrypto.c line 101
Quoted 6 lines
lib/ecdsa/ecdsa-libcrypto.c new file +6
-0+ECDSA_SIG_set0 (sig, r, s); + +return sig; +} + +static size_t ecdsa_key_size_bytes (const EC_KEY *key)I think all of these functions need a comment.
The function names are self-explanatory. One point of confusion would be the meaning of raw signature -- this is already explained at the top.
Quoted 17 lines
Quoted 5 lines
lib/ecdsa/ecdsa-libcrypto.c new file +4
-0+{ +const EC_GROUP *group; + + group =EC_KEY_get0_group (key);lib/ecdsa/ecdsa-libcrypto.c line 115
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0+return EC_GROUP_order_bits (group) /8 ; +} + +static int read_key (struct signer *ctx,const char *key_name) +{ +FILE *f =fopen (key_name,"r" ); + +if (!f) { +fprintf (stderr,"Can not get key file '%s'\n" , key_name); +return -1 ;return
-EIOperhaps?
Good idea!
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c line 122
Quoted 7 lines
lib/ecdsa/ecdsa-libcrypto.c new file +7
-0+ } + + ctx->evp_key =PEM_read_PrivateKey (f,NULL ,NULL ,NULL ); +fclose (f); +if (!ctx->evp_key) { +fprintf (stderr,"Can not read key from '%s'\n" , key_name); +return -1 ;These should return useful error number: -1 is
-EPERMwhich doesn't seem right here.
-EIO again?
Quoted 15 lines
Quoted 15 lines
lib/ecdsa/ecdsa-libcrypto.c new file +15
-0+ } + +if (EVP_PKEY_id (ctx->evp_key) !=EVP_PKEY_EC ) { +fprintf (stderr,"'%s' is not an ECDSA key\n" , key_name); +return -1 ; + } + + ctx->ecdsa_key =EVP_PKEY_get1_EC_KEY (ctx->evp_key); +if (!ctx->ecdsa_key) +fprintf (stderr,"Can not extract ECDSA key\n" ); + +return (ctx->ecdsa_key) ?0 :-1 ; +} + +static int prepare_ctx (struct signer *ctx,const struct image_sign_info *info)
Quoted 8 lines
lib/ecdsa/ecdsa-libcrypto.c line 142
Quoted 5 lines
lib/ecdsa/ecdsa-libcrypto.c new file +5
-0+{ +const char *kname = info->keydir; +int key_len_bytes; + +if (alloc_ctx (ctx, info) <0 )That function returns 0 on success, so you don't need the < 0. A comment on the above function would make that clear.
I think the following would be less clear:
if (alloc_ctx()) error();
Does alloc_ctx() return an int? Does it return memory? It has (m)alloc in the name. By having a '< 0' in the predicate, it's now clear that this can't return a pointer. So yes, you might scratch your head as to why there's a '< 0' that's not needed. Also, you know that this function returns an error code without needing to scroll up to its definition. A comment above the function wouldn't eliminate the need to scroll up.
Quoted 21 lines
Quoted 5 lines
lib/ecdsa/ecdsa-libcrypto.c new file +5
-0+return -1 ; + +if (read_key (ctx, kname) <0 ) +return -1 ; +lib/ecdsa/ecdsa-libcrypto.c line 157
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0+ key_len_bytes =ecdsa_key_size_bytes (ctx->ecdsa_key); +if (key_len_bytes != info->crypto->key_len) { +fprintf (stderr,"Expected a %u-bit key, got %u-bit key\n" , + info->crypto->key_len *8 , key_len_bytes *8 ); +return -1 ; + } + +return 0 ; +} +[..]
Regards,
Simon
RFC PATCH v2 3/5 lib: Add support for ECDSA image signing
Quoted 9 lines · Alex G.
Quoted 1 line · Simon Glass
Hi Alexandru,
Hi Simon,
(pun alert!) A lot of your comments have to do with comments. I use comments as a tool to add something of value to code. When the code is self-documenting, comments don't help much.
See kernel coding style chapter 8.
Comments for comments sake are bad. Comments so that we can also have reasonable generated documentation are good. Function prototypes fall in to that second category to me, with few exceptions (and that we have lots of bad examples isn't a good reason). The function names may well make it obvious what's going on but the comments allow for generated documentation to include that when explaining the not so obvious parts. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210107/b8a3621c/attachment.sig>
RFC PATCH v2 3/5 lib: Add support for ECDSA image signing
Quoted 11 lines · Tom Rini
Quoted 9 lines · Alex G.
Quoted 1 line · Simon Glass
Hi Alexandru,
Hi Simon,
(pun alert!) A lot of your comments have to do with comments. I use comments as a tool to add something of value to code. When the code is self-documenting, comments don't help much.
See kernel coding style chapter 8.
Quoted 8 lines
Comments for comments sake are bad. Comments so that we can also have reasonable generated documentation are good. Function prototypes fall in to that second category to me, with few exceptions (and that we have lots of bad examples isn't a good reason). The function names may well make it obvious what's going on but the comments allow for generated documentation to include that when explaining the not so obvious parts. Thanks!
The problem with generated documentation is that it's not very useful. People add comments for the sake of comments to have something generated. Most often you end up with a detailed description of all the details, but almost never the big picture. Nowadays, I don't even waste my time reading generated documentation.
I am getting ready to send the new series with the goodies requested by Simon. I don't find the new comments to be useful, and I find some to spread out the code such that it hurts readability. They will be there because you and Simon asked nicely, although I think you're wrong.
Alex
RFC PATCH v2 3/5 lib: Add support for ECDSA image signing
In reply to Alex G.Hi Alex,
Quoted 11 lines · Alex G.
Quoted 1 line · Simon Glass
Hi Alexandru,
Hi Simon,
(pun alert!) A lot of your comments have to do with comments. I use comments as a tool to add something of value to code. When the code is self-documenting, comments don't help much.
See kernel coding style chapter 8.
Quoted 5 lines
What comments can do, is increase code size and break code flow -- there is a cost to having them. I'm certain you've seen functions that need to be scrolled up and down because of a huge comment smack in the middle. I'll address individual comment comments below.
Don't get me started on comments in the kernel...there seems to almost be a ban on them :-)
We used to follow the same approach but now we have comments for non-trivial code. Comments and tests are closely related.
- if there is no comment, we don't know what the function is supposed to do so we can't change it (there is no contract), we are not sure if line 5 is a bug or a real quirk, casual readers can't understand what is going on, the automated docs don't produce anything, no one wants to refactor it, etc.
- if there is no test, presumably the code doesn't work now, if it ever did
Quoted 85 lines
Quoted 76 lines · Alexandru Gagniuc
Quoted 74 lines
mkimage supports rsa2048, and rsa4096 signatures. With newer silicon now supporting hardware-accelerated ECDSA, it makes sense to expand signing support to elliptic curves.
Implement host-side ECDSA signing and verification with libcrypto. Device-side implementation of signature verification is beyond the scope of this patch.
Signed-off-by Alexandru Gagniuc <[email protected]>--- common/image-sig.c | 14 +- include/u-boot/ecdsa.h | 27 ++++ lib/ecdsa/ecdsa-libcrypto.c | 300 ++++++++++++++++++++++++++++++++++++ tools/Makefile | 3 + 4 files changed, 342 insertions(+), 2 deletions(-)create mode 100644
include/u-boot/ecdsa.h
create mode 100644lib/ecdsa/ecdsa-libcrypto.ccommon/image-sig.c +12
-2@@ -15,6 +15,7 @@DECLARE_GLOBAL_DATA_PTR ;#endif /* !USE_HOSTCC*/ #include <image.h> +#include <u-boot/ecdsa.h> #include <u-boot/rsa.h> #include <u-boot/hash-checksum.h> @@ -82,8 +83,17 @@ struct crypto_algo crypto_algos[] = { .sign = rsa_sign, .add_verify_data = rsa_add_verify_data, .verify = rsa_verify, - } - + }, +#if defined(USE_HOSTCC) + /* Currently, only host support exists for ECDSA */ + { + .name = "ecdsa256", + .key_len = ECDSA256_BYTES, + .sign = ecdsa_sign, + .add_verify_data = ecdsa_add_verify_data, + .verify = ecdsa_verify, + }, +#endif }; struct padding_algo padding_algos[] = {include/u-boot/ecdsa.h new file +17
-0@@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]>. +*/ + +#ifndef _ECDSA_H +#define _ECDSA_H + +#include <errno.h> +#include <image.h> + +/** +* crypto_algo API impementation for ECDSA; +* @see "struct crypt_algo" +* @{ +*/ +int ecdsa_sign(struct image_sign_info *info, const struct image_region region[],Quoted 8 lines
include/u-boot/ecdsa.h line 22
Quoted 5 lines
include/u-boot/ecdsa.h new file +5
-0+ int region_count, uint8_t **sigp, uint *sig_len); +int ecdsa_verify (struct image_sign_info *info, +const struct image_region region[],int region_count, +uint8_t *sig,uint sig_len); +int ecdsa_add_verify_data (struct image_sign_info *info,void *keydest);Please always add full comments when you export functions, or have a non-trivial static function.
Quoted 4 lines
I disagree. These functions implement and are designed to be used via the
crypt_algoAPI. One should understand thecrypt_algoAPI, and any deviations in behavior would be a bug. So there is no scenario in which comments here would be useful.
Please add full comments on exported function, no exceptions. Again, this is not Linux and people don't have as much time to cogitate on code. They are just trying to get their device working.
Quoted 27 lines
Quoted 18 lines
Quoted 18 lines
include/u-boot/ecdsa.h new file +5
-0+/** @} */ + +#define ECDSA256_BYTES (256 / 8) + +#endif lib/ecdsa/ecdsa-libcrypto.c new file +6
-0@@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* ECDSA image signing implementation using libcrypto backend +* +* The signature is a binary representation of the (R, S) points, padded to the +* key size. The signature will be (2 * key_size_bits) / 8 bytes. Quoted 8 lines
lib/ecdsa/ecdsa-libcrypto.c line 10
Quoted 4 lines
lib/ecdsa/ecdsa-libcrypto.c new file +4
-0+* +* Deviations from behavior of RSA equivalent: +* - Verification uses private key. This is not technically required, but a +* limitation on how clumsy the openssl API is to use. I'm not quite sure what the implications are on this. If this is public key crypto, the private key is not available, so how can you verify with it?
Quoted 3 lines
I presume this is fixable, but only as an academic exercise. This file is for mkimage, which doesn't do standalone verification. The way you verify is in u-boot. That is the subject of another series.
OK I'm just a bit confused as to how this tests anything. But sure it can come later.
Quoted 9 lines
Quoted 6 lines
lib/ecdsa/ecdsa-libcrypto.c line 13
Quoted 4 lines
lib/ecdsa/ecdsa-libcrypto.c new file +3
-0+* - Handling of keys and key paths: +* - The '-K' key directory option must contain path to the key file, +* instead of the key directory. If we make this change we should update RSA to do the same.
Of course, but is there agreement as to this direction? There seem to be some hidden subtleties to key-name-hint that I don't fully understand yet.
It's just that the filename is defined by the code not the parameter. There is a public key file and a certificate file in the same dir, so it is convenient to specify the dir rather than the filename. But I don't see a big problem with changing it. Everyone will have to update their scripts I suppose, so there is that...
Another option would be to add a new arg which specifies the exact file.
Quoted 22 lines
Quoted 13 lines
Quoted 13 lines
lib/ecdsa/ecdsa-libcrypto.c new file +12
-0+* - No assumptions are made about the file extension of the key +* - The 'key-name-hint' property is only used for naming devicetree nodes, +* but is not used for looking up keys on the filesystem. +* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]> +*/ + +#include <u-boot/ecdsa.h> +#include <u-boot/fdt-libcrypto.h> +#include <openssl/ssl.h> +#include <openssl/ec.h> +#include <openssl/bn.h> Quoted 8 lines
lib/ecdsa/ecdsa-libcrypto.c line 31
Quoted 6 lines
lib/ecdsa/ecdsa-libcrypto.c new file +6
-0+ +struct signer { +EVP_PKEY *evp_key; +EC_KEY *ecdsa_key; +void *hash; +void *signature;/* Do not free() !*/ need comments
Quoted 3 lines
Is this for the sake of having comments, or is there something of value that I've missed? The only member that could be confusing is
evp_key, but that becomes obvious in the context of libcrypto.
What does hash point to and what is it for? Same with signature. Why are there two keys and what is the difference? Please, if you are contributing to U-Boot, add comments.
Quoted 8 lines
[..]
Quoted 3 lines
Quoted 1 line
+static
size_tecdsa_key_size_bytes(const EC_KEY *key)I think all of these functions need a comment.
The function names are self-explanatory. One point of confusion would be the meaning of raw signature -- this is already explained at the top.
I would still like the comments please. If it's really trivial that's fine, but this code is not obvious to me. We need to make it easy to contribute to U-Boot.
Quoted 29 lines
Quoted 18 lines
Quoted 6 lines
lib/ecdsa/ecdsa-libcrypto.c new file +4
-0+{ +const EC_GROUP *group; + + group =EC_KEY_get0_group (key);lib/ecdsa/ecdsa-libcrypto.c line 115
Quoted 10 lines
lib/ecdsa/ecdsa-libcrypto.c new file +10
-0+return EC_GROUP_order_bits (group) /8 ; +} + +static int read_key (struct signer *ctx,const char *key_name) +{ +FILE *f =fopen (key_name,"r" ); + +if (!f) { +fprintf (stderr,"Can not get key file '%s'\n" , key_name); +return -1 ;return
-EIOperhaps?Good idea!
Quoted 8 lines
Quoted 7 lines
lib/ecdsa/ecdsa-libcrypto.c new file +7
-0+ } + + ctx->evp_key =PEM_read_PrivateKey (f,NULL ,NULL ,NULL ); +fclose (f); +if (!ctx->evp_key) { +fprintf (stderr,"Can not read key from '%s'\n" , key_name); +return -1 ;
Quoted 4 lines
Quoted 2 lines
These should return useful error number: -1 is
-EPERMwhich doesn't seem right here.
-EIOagain?
Sure, or perhaps a different error if this could mean that the file is corrupt.
[..]
Quoted 15 lines
Quoted 9 lines
lib/ecdsa/ecdsa-libcrypto.c line 142
Quoted 6 lines
lib/ecdsa/ecdsa-libcrypto.c new file +6
-0+static int prepare_ctx (struct signer *ctx,const struct image_sign_info *info) +{ +const char *kname = info->keydir; +int key_len_bytes; + +if (alloc_ctx (ctx, info) <0 )That function returns 0 on success, so you don't need the < 0. A comment on the above function would make that clear.
I think the following would be less clear:
if (alloc_ctx()) error();
Quoted 6 lines
Does
alloc_ctx()return an int? Does it return memory? It has (m)alloc in the name. By having a '< 0' in the predicate, it's now clear that this can't return a pointer. So yes, you might scratch your head as to why there's a '< 0' that's not needed. Also, you know that this function returns an error code without needing to scroll up to its definition. A comment above the function wouldn't eliminate the need to scroll up.
U-Boot generally returns 0 for success and -ve for error. The +ve numbers are used when the function needs to return a value, if valid.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
+ return -1;
-ENOMEM
Quoted 3 lines
Quoted 3 lines
lib/ecdsa/ecdsa-libcrypto.c line 146
Quoted 3 lines
lib/ecdsa/ecdsa-libcrypto.c new file +3
-0+ +if (read_key (ctx, kname) <0 ) +return -1 ;
I recommend handling errors like this:
int ret;
ret = read_key(ctx, kname);
if (ret)
return log_msg_ret("read", ret);
so that people can quickly figure out exactly what is failing either by looking at the error number (propagated to the top) or turning on CONFIG_LOG_ERROR_RETURN
Quoted 14 lines
Quoted 14 lines
Quoted 11 lines
lib/ecdsa/ecdsa-libcrypto.c new file +11
-0+ + key_len_bytes =ecdsa_key_size_bytes (ctx->ecdsa_key); +if (key_len_bytes != info->crypto->key_len) { +fprintf (stderr,"Expected a %u-bit key, got %u-bit key\n" , + info->crypto->key_len *8 , key_len_bytes *8 ); +return -1 ; + } + +return 0 ; +} +[..]
Quoted 3 lines
Quoted 3 lines
Regards,
Simon
Regards,
Simon
RFC PATCH v2 3/5 lib: Add support for ECDSA image signing
Quoted 26 lines · Simon Glass
Hi Alex,
Quoted 11 lines · Alex G.
Quoted 1 line · Simon Glass
Hi Alexandru,
Hi Simon,
(pun alert!) A lot of your comments have to do with comments. I use comments as a tool to add something of value to code. When the code is self-documenting, comments don't help much.
See kernel coding style chapter 8.Quoted 5 lines
What comments can do, is increase code size and break code flow -- there is a cost to having them. I'm certain you've seen functions that need to be scrolled up and down because of a huge comment smack in the middle. I'll address individual comment comments below.
Don't get me started on comments in the kernel...there seems to almost be a ban on them :-)
We used to follow the same approach but now we have comments for non-trivial code. Comments and tests are closely related.
Quoted 6 lines
- if there is no comment, we don't know what the function is supposed to do so we can't change it (there is no contract), we are not sure if line 5 is a bug or a real quirk, casual readers can't understand what is going on, the automated docs don't produce anything, no one wants to refactor it, etc.
- if there is no test, presumably the code doesn't work now, if it ever did
I will add each of the comments you are requesting, but not for the reasons quoted. The comments that I could write won't add anything of value -- they would just make the code larger, and increase the cognitive load. You are the maintainer, and starting an argument would be pointless. In the end, comments don't get compiled, and the code works just the same :)
[snip]
Quoted 4 lines
Again,
this is not Linux and people don't have as much time to cogitate on code.
I resent that statement. It takes me longer to do a task in u-boot than it would take me to do a similar task in linux. In the context of comments (note I intentionally did not say 'documentation'), does plastering the same information over and over in a way that hides the essence really help? I think the current path is misguided, and will only aggravate the problem. (I'll add the comments, though)
Quoted 1 line
They are just trying to get their device working.
That's true for linux too.
[snip]
All other comments will be addressed in v3
RFC PATCH v2 4/5 doc: signature.txt: Document devicetree format for ECDSA keys
In reply to Alexandru Gagniuc--- doc/uImage.FIT/signature.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
doc/uImage.FIT/signature.txt +6 -1
@@ -142,7 +142,7 @@ public key in U-Boot's control FDT (using CONFIG_OF_CONTROL). Public keys should be stored as sub-nodes in a /signature node. Required properties are: -- algo: Algorithm name (e.g. "sha1,rsa2048") +- algo: Algorithm name (e.g. "sha1,rsa2048" or "sha256,ecdsa256") Optional properties are:
@@ -167,6 +167,11 @@ For RSA the following are mandatory: - rsa,r-squared: (2^num-bits)^2 as a big-endian multi-word integer - rsa,n0-inverse: -1 / modulus[0] mod 2^32 +For ECDSA the following are mandatory: +- ecdsa,curve: Name of ECDSA curve (e.g. "prime256v1") +- ecdsa,x-point: Public key X coordinate as a big-endian multi-word integer +- ecdsa,y-point: Public key Y coordinate as a big-endian multi-word integer + These parameters can be added to a binary device tree using parameter -K of the mkimage command::
Signature · 1 line
2.26.2
RFC PATCH v2 4/5 doc: signature.txt: Document devicetree format for ECDSA keys
Quoted 5 lines · Alexandru Gagniuc
Signed-off-by Alexandru Gagniuc <[email protected]>--- doc/uImage.FIT/signature.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
RFC PATCH v2 5/5 test/py: ecdsa: Add test for mkimage ECDSA signing
In reply to Alexandru GagniucAdd a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
--- test/py/tests/test_fit_ecdsa.py | 111 ++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 test/py/tests/test_fit_ecdsa.py
test/py/tests/test_fit_ecdsa.py new file +111 -0
@@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020, Alexandru Gagniuc <[email protected]> + +""" +Test ECDSA signing of FIT images + +This test uses mkimage to sign an existing FIT image with an ECDSA key. The +signature is then extracted, and verified against pyCryptodome. +This test doesn't run the sandbox. It only checks the host tool 'mkimage' +""" + +import pytest +import u_boot_utils as util +from Cryptodome.Hash import SHA256 +from Cryptodome.PublicKey import ECC +from Cryptodome.Signature import DSS + +class SignableFitImage(object): + """ Helper to manipulate a FIT image on disk """ + def __init__(self, cons, file_name): + self.fit = file_name + self.cons = cons + self.signable_nodes = set() + + def __fdt_list(self, path): + return util.run_and_log(self.cons, f'fdtget -l {self.fit} {path}') + + def __fdt_set(self, node, **prop_value): + for prop, value in prop_value.items(): + util.run_and_log(self.cons, f'fdtput -ts {self.fit} {node} {prop} {value}') + + def __fdt_get_binary(self, node, prop): + numbers = util.run_and_log(self.cons, f'fdtget -tbi {self.fit} {node} {prop}') + + bignum = bytearray() + for little_num in numbers.split(): + bignum.append(int(little_num)) + + return bignum + + def find_signable_image_nodes(self): + for node in self.__fdt_list('/images').split(): + image = f'/images/{node}' + if 'signature' in self.__fdt_list(image): + self.signable_nodes.add(image) + + return self.signable_nodes + + def change_signature_algo_to_ecdsa(self): + for image in self.signable_nodes: + self.__fdt_set(f'{image}/signature', algo='sha256,ecdsa256') + + def sign(self, mkimage, key_file): + util.run_and_log(self.cons, [mkimage, '-F', self.fit, f'-k{key_file}']) + + def check_signatures(self, key): + for image in self.signable_nodes: + raw_sig = self.__fdt_get_binary(f'{image}/signature', 'value') + raw_bin = self.__fdt_get_binary(image, 'data') + + sha = SHA256.new(raw_bin) + verifier = DSS.new(key, 'fips-186-3') + verifier.verify(sha, bytes(raw_sig)) + + + at pytest.mark.buildconfigspec('fit_signature') + at pytest.mark.requiredtool('dtc') + at pytest.mark.requiredtool('fdtget') + at pytest.mark.requiredtool('fdtput') +def test_fit_ecdsa(u_boot_console): + """TODO: Document me + """ + def generate_ecdsa_key(): + return ECC.generate(curve='prime256v1') + + def assemble_fit_image(dest_fit, its, destdir): + dtc_args = f'-I dts -O dtb -i {destdir}' + util.run_and_log(cons, [mkimage, '-D', dtc_args, '-f', its, dest_fit]) + + def dtc(dts): + dtb = dts.replace('.dts', '.dtb') + util.run_and_log(cons, f'dtc {datadir}/{dts} -O dtb -o {tempdir}/{dtb}') + + cons = u_boot_console + mkimage = cons.config.build_dir + '/tools/mkimage' + datadir = cons.config.source_dir + '/test/py/tests/vboot/' + tempdir = cons.config.result_dir + key_file = f'{tempdir}/ecdsa-test-key.pem' + fit_file = f'{tempdir}/test.fit' + dtc('sandbox-kernel.dts') + + key = generate_ecdsa_key() + + # Create a number kernel image with zeroes + with open(f'{tempdir}/test-kernel.bin', 'w') as fd: + fd.write(500 * chr(0)) + + with open(key_file, 'w') as f: + f.write(key.export_key(format='PEM')) + + assemble_fit_image(fit_file, f'{datadir}/sign-images-sha256.its', tempdir) + + fit = SignableFitImage(cons, fit_file) + nodes = fit.find_signable_image_nodes() + if len(nodes) == 0: + raise ValueError('FIT image has no "/image" nodes with "signature"') + + fit.change_signature_algo_to_ecdsa() + fit.sign(mkimage, key_file) + fit.check_signatures(key)
Signature · 1 line
2.26.2
RFC PATCH v2 5/5 test/py: ecdsa: Add test for mkimage ECDSA signing
Hi Alexandru,
Quoted 6 lines · Alexandru Gagniuc
Add a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
Quoted 6 lines
Signed-off-by Alexandru Gagniuc <[email protected]>--- test/py/tests/test_fit_ecdsa.py | 111 ++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 test/py/tests/test_fit_ecdsa.py
This test looks fine but the functions need full comments. I do think it might be worth putting the code in test_vboot, particularly when you get to the sandbox implementation.
For installing the Python library, you might need to update the docs in test/ and perhaps install things in .gitlab-ci.yml and .azure...
Quoted 120 lines
test/py/tests/test_fit_ecdsa.py new file +111
-1@@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020, Alexandru Gagniuc <[email protected]> + +""" +Test ECDSA signing of FIT images + +This test uses mkimage to sign an existing FIT image with an ECDSA key. The +signature is then extracted, and verified against pyCryptodome. +This test doesn't run the sandbox. It only checks the host tool 'mkimage' +""" + +import pytest +import u_boot_utils as util +from Cryptodome.Hash import SHA256 +from Cryptodome.PublicKey import ECC +from Cryptodome.Signature import DSS + +class SignableFitImage(object): + """ Helper to manipulate a FIT image on disk """ + def __init__(self, cons, file_name): + self.fit = file_name + self.cons = cons + self.signable_nodes = set() + + def __fdt_list(self, path): + return util.run_and_log(self.cons, f'fdtget -l {self.fit} {path}') + + def __fdt_set(self, node, **prop_value): + for prop, value in prop_value.items(): + util.run_and_log(self.cons, f'fdtput -ts {self.fit} {node} {prop} {value}') + + def __fdt_get_binary(self, node, prop): + numbers = util.run_and_log(self.cons, f'fdtget -tbi {self.fit} {node} {prop}') + + bignum = bytearray() + for little_num in numbers.split(): + bignum.append(int(little_num)) + + return bignum + + def find_signable_image_nodes(self): + for node in self.__fdt_list('/images').split(): + image = f'/images/{node}' + if 'signature' in self.__fdt_list(image): + self.signable_nodes.add(image) + + return self.signable_nodes + + def change_signature_algo_to_ecdsa(self): + for image in self.signable_nodes: + self.__fdt_set(f'{image}/signature', algo='sha256,ecdsa256') + + def sign(self, mkimage, key_file): + util.run_and_log(self.cons, [mkimage, '-F', self.fit, f'-k{key_file}']) + + def check_signatures(self, key): + for image in self.signable_nodes: + raw_sig = self.__fdt_get_binary(f'{image}/signature', 'value') + raw_bin = self.__fdt_get_binary(image, 'data') + + sha = SHA256.new(raw_bin) + verifier = DSS.new(key, 'fips-186-3') + verifier.verify(sha, bytes(raw_sig)) + + + at pytest.mark.buildconfigspec('fit_signature') + at pytest.mark.requiredtool('dtc') + at pytest.mark.requiredtool('fdtget') + at pytest.mark.requiredtool('fdtput') +def test_fit_ecdsa(u_boot_console): + """TODO: Document me + """ + def generate_ecdsa_key(): + return ECC.generate(curve='prime256v1') + + def assemble_fit_image(dest_fit, its, destdir): + dtc_args = f'-I dts -O dtb -i {destdir}' + util.run_and_log(cons, [mkimage, '-D', dtc_args, '-f', its, dest_fit]) + + def dtc(dts): + dtb = dts.replace('.dts', '.dtb') + util.run_and_log(cons, f'dtc {datadir}/{dts} -O dtb -o {tempdir}/{dtb}') + + cons = u_boot_console + mkimage = cons.config.build_dir + '/tools/mkimage' + datadir = cons.config.source_dir + '/test/py/tests/vboot/' + tempdir = cons.config.result_dir + key_file = f'{tempdir}/ecdsa-test-key.pem' + fit_file = f'{tempdir}/test.fit' + dtc('sandbox-kernel.dts') + + key = generate_ecdsa_key() + + # Create a number kernel image with zeroes + with open(f'{tempdir}/test-kernel.bin', 'w') as fd: + fd.write(500 * chr(0)) + + with open(key_file, 'w') as f: + f.write(key.export_key(format='PEM')) + + assemble_fit_image(fit_file, f'{datadir}/sign-images-sha256.its', tempdir) + + fit = SignableFitImage(cons, fit_file) + nodes = fit.find_signable_image_nodes() + if len(nodes) == 0: + raise ValueError('FIT image has no "/image" nodes with "signature"') + + fit.change_signature_algo_to_ecdsa() + fit.sign(mkimage, key_file) + fit.check_signatures(key) --2.26.2
RFC PATCH v2 5/5 test/py: ecdsa: Add test for mkimage ECDSA signing
Quoted 16 lines · Simon Glass
Hi Alexandru,
Quoted 6 lines · Alexandru Gagniuc
Add a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
Quoted 6 lines
Signed-off-by Alexandru Gagniuc <[email protected]>--- test/py/tests/test_fit_ecdsa.py | 111 ++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+)create mode 100644
test/py/tests/test_fit_ecdsa.py
Quoted 3 lines
This test looks fine but the functions need full comments. I do think it might be worth putting the code in
test_vboot, particularly when you get to the sandbox implementation.
test_vboot seems to be testing the bootm command, while with this test I'm only looking to test the host-side (mkimage). In the next series, I won't have a software implementation of ECDSA, like RSA_MOD_EXP. I will use the ROM on the stm32mp. So there won't be somthing testable in the sandbox.
Quoted 3 lines
For installing the Python library, you might need to update the docs in test/ and perhaps install things in .gitlab-ci.yml and .azure...
Sure, let me look into this.
Quoted 121 lines
Quoted 121 lines
test/py/tests/test_fit_ecdsa.py new file +111
-1@@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020, Alexandru Gagniuc <[email protected]> + +""" +Test ECDSA signing of FIT images + +This test uses mkimage to sign an existing FIT image with an ECDSA key. The +signature is then extracted, and verified against pyCryptodome. +This test doesn't run the sandbox. It only checks the host tool 'mkimage' +""" + +import pytest +import u_boot_utils as util +from Cryptodome.Hash import SHA256 +from Cryptodome.PublicKey import ECC +from Cryptodome.Signature import DSS + +class SignableFitImage(object): + """ Helper to manipulate a FIT image on disk """ + def __init__(self, cons, file_name): + self.fit = file_name + self.cons = cons + self.signable_nodes = set() + + def __fdt_list(self, path): + return util.run_and_log(self.cons, f'fdtget -l {self.fit} {path}') + + def __fdt_set(self, node, **prop_value): + for prop, value in prop_value.items(): + util.run_and_log(self.cons, f'fdtput -ts {self.fit} {node} {prop} {value}') + + def __fdt_get_binary(self, node, prop): + numbers = util.run_and_log(self.cons, f'fdtget -tbi {self.fit} {node} {prop}') + + bignum = bytearray() + for little_num in numbers.split(): + bignum.append(int(little_num)) + + return bignum + + def find_signable_image_nodes(self): + for node in self.__fdt_list('/images').split(): + image = f'/images/{node}' + if 'signature' in self.__fdt_list(image): + self.signable_nodes.add(image) + + return self.signable_nodes + + def change_signature_algo_to_ecdsa(self): + for image in self.signable_nodes: + self.__fdt_set(f'{image}/signature', algo='sha256,ecdsa256') + + def sign(self, mkimage, key_file): + util.run_and_log(self.cons, [mkimage, '-F', self.fit, f'-k{key_file}']) + + def check_signatures(self, key): + for image in self.signable_nodes: + raw_sig = self.__fdt_get_binary(f'{image}/signature', 'value') + raw_bin = self.__fdt_get_binary(image, 'data') + + sha = SHA256.new(raw_bin) + verifier = DSS.new(key, 'fips-186-3') + verifier.verify(sha, bytes(raw_sig)) + + + at pytest.mark.buildconfigspec('fit_signature') + at pytest.mark.requiredtool('dtc') + at pytest.mark.requiredtool('fdtget') + at pytest.mark.requiredtool('fdtput') +def test_fit_ecdsa(u_boot_console): + """TODO: Document me + """ + def generate_ecdsa_key(): + return ECC.generate(curve='prime256v1') + + def assemble_fit_image(dest_fit, its, destdir): + dtc_args = f'-I dts -O dtb -i {destdir}' + util.run_and_log(cons, [mkimage, '-D', dtc_args, '-f', its, dest_fit]) + + def dtc(dts): + dtb = dts.replace('.dts', '.dtb') + util.run_and_log(cons, f'dtc {datadir}/{dts} -O dtb -o {tempdir}/{dtb}') + + cons = u_boot_console + mkimage = cons.config.build_dir + '/tools/mkimage' + datadir = cons.config.source_dir + '/test/py/tests/vboot/' + tempdir = cons.config.result_dir + key_file = f'{tempdir}/ecdsa-test-key.pem' + fit_file = f'{tempdir}/test.fit' + dtc('sandbox-kernel.dts') + + key = generate_ecdsa_key() + + # Create a number kernel image with zeroes + with open(f'{tempdir}/test-kernel.bin', 'w') as fd: + fd.write(500 * chr(0)) + + with open(key_file, 'w') as f: + f.write(key.export_key(format='PEM')) + + assemble_fit_image(fit_file, f'{datadir}/sign-images-sha256.its', tempdir) + + fit = SignableFitImage(cons, fit_file) + nodes = fit.find_signable_image_nodes() + if len(nodes) == 0: + raise ValueError('FIT image has no "/image" nodes with "signature"') + + fit.change_signature_algo_to_ecdsa() + fit.sign(mkimage, key_file) + fit.check_signatures(key) --2.26.2
RFC PATCH v2 5/5 test/py: ecdsa: Add test for mkimage ECDSA signing
Hi Alex,
Quoted 20 lines · Alex G.
Quoted 16 lines · Simon Glass
Hi Alexandru,
Quoted 12 lines · Alexandru Gagniuc
Add a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
Signed-off-by Alexandru Gagniuc <[email protected]>--- test/py/tests/test_fit_ecdsa.py | 111 ++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+)create mode 100644
test/py/tests/test_fit_ecdsa.py
Quoted 5 lines
Quoted 3 lines
This test looks fine but the functions need full comments. I do think it might be worth putting the code in
test_vboot, particularly when you get to the sandbox implementation.
test_vbootseems to be testing the bootm command, while with this test
It also runs fit_check_sign to check the signature.
Quoted 4 lines
I'm only looking to test the host-side (mkimage). In the next series, I won't have a software implementation of ECDSA, like
RSA_MOD_EXP. I will use the ROM on the stm32mp. So there won't be somthing testable in the sandbox.
I'm not sure that is a good idea. With driver model you'll end up creating a ECDSA driver I suppose, so implementing it for sandbox should be possible. Is it a complicated algorithm? Without that, I'm not even sure how fit_check_sign could work?
Quoted 1 line
[..]
Regards,
Simon
RFC PATCH v2 5/5 test/py: ecdsa: Add test for mkimage ECDSA signing
Quoted 23 lines · Simon Glass
Hi Alex,
Quoted 20 lines · Alex G.
Quoted 16 lines · Simon Glass
Hi Alexandru,
Quoted 12 lines · Alexandru Gagniuc
Add a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
Signed-off-by Alexandru Gagniuc <[email protected]>--- test/py/tests/test_fit_ecdsa.py | 111 ++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+)create mode 100644
test/py/tests/test_fit_ecdsa.py
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
This test looks fine but the functions need full comments. I do think it might be worth putting the code in
test_vboot, particularly when you get to the sandbox implementation.
test_vbootseems to be testing the bootm command, while with this testIt also runs
fit_check_signto check the signature.
Hmm, it backends on tools/check_fit_sign. Would be an interesting execrise to extend it ecdsa signatures, but that would take significantly more effort than the simple test I am proposing here.
Quoted 8 lines
Quoted 4 lines
I'm only looking to test the host-side (mkimage). In the next series, I won't have a software implementation of ECDSA, like
RSA_MOD_EXP. I will use the ROM on the stm32mp. So there won't be somthing testable in the sandbox.I'm not sure that is a good idea. With driver model you'll end up creating a ECDSA driver I suppose, so implementing it for sandbox should be possible. Is it a complicated algorithm?
A software implementation of ECDSA is outside the scope of my project.
Quoted 1 line
Without that, I'm not even sure how
fit_check_signcould work?
It uses the ops->verify in ecdsa-libcrypto, does it not?
Quoted 6 lines
[..]
Regards,
Simon