xfs: rework log quiesce to cover the log
cover xfs: rework log quiesce to cover the log
Hi all,
This series modifies the log quiesce code path to cover the log instead of mark it clean and separates the latter into a distinct step. This allows existing users to determine whether to quiesce (i.e. cover) or clean the log depending on the operation, and thus avoids the need for contexts like freeze to have to redirty the log after a quiesce.
By covering the log on quiesce, we can also fold final superblock updates (i.e., lazy superblock counters) into the quiesce sequence because covering uses the same superblock transaction as the explicit superblock updates. This same approach can accommodate (probably with some additional tweaks) future final superblock updates, such as for log feature compatibility bit management when the log is cleared of incompatible items.
Patch 1 is a repost of a lazy sb accounting bug fix that was previously sent (included here as a dependency). Patches 2-3 make some preliminary cleanups. Patch 4 injects log covering into the log quiesce sequence. Patches 5-6 fold the existing lazy superblock accounting update into quiesce. Patches 7-8 make some final refactoring cleanups (these two patches could probably be squashed now that I look at them again). Finally, patch 9 updates fs freeze to cover the log instead of cleaning and redirtying it.
Thoughts, reviews, flames appreciated.
Brian
Brian Foster (9):
xfs: sync lazy sb accounting on quiesce of read-only mounts
xfs: lift writable fs check up into log worker task
xfs: separate log cleaning from log quiesce
xfs: cover the log during log quiesce
xfs: don't reset log idle state on covering checkpoints
xfs: fold sbcount quiesce logging into log covering
xfs: remove duplicate wq cancel and log force from attr quiesce
xfs: remove xfs_quiesce_attr()
xfs: cover the log on freeze instead of cleaning it
fs/xfs/xfs_log.c | 122 +++++++++++++++++++++++++++++++++++++-------- fs/xfs/xfs_log.h | 4 +- fs/xfs/xfs_mount.c | 34 +------------ fs/xfs/xfs_mount.h | 1 - fs/xfs/xfs_super.c | 38 +------------- 5 files changed, 106 insertions(+), 93 deletions(-)
Signature · 1 line
2.26.2
PATCH 1/9 xfs: sync lazy sb accounting on quiesce of read-only mounts
xfs_log_sbcount() syncs the superblock specifically to accumulate the in-core percpu superblock counters and commit them to disk. This is required to maintain filesystem consistency across quiesce (freeze, read-only mount/remount) or unmount when lazy superblock accounting is enabled because individual transactions do not update the superblock directly.
This mechanism works as expected for writable mounts, but xfs_log_sbcount() skips the update for read-only mounts. Read-only mounts otherwise still allow log recovery and write out an unmount record during log quiesce. If a read-only mount performs log recovery, it can modify the in-core superblock counters and write an unmount record when the filesystem unmounts without ever syncing the in-core counters. This leaves the filesystem with a clean log but in an inconsistent state with regard to lazy sb counters.
Update xfs_log_sbcount() to use the same logic xfs_log_unmount_write() uses to determine when to write an unmount record. We can drop the freeze state check because the update is already allowed during the freezing process and no context calls this function on an already frozen fs. This ensures that lazy accounting is always synced before the log is cleaned. Refactor this logic into a new helper to distinguish between a writable filesystem and a writable log. Specifically, the log is writable unless the filesystem is mounted with the norecovery mount option, the underlying log device is read-only, or the filesystem is shutdown.
--- fs/xfs/xfs_log.c | 28 ++++++++++++++++++++-------- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_mount.c | 3 +-- 3 files changed, 22 insertions(+), 10 deletions(-)
fs/xfs/xfs_log.c +20 -8
@@ -347,6 +347,25 @@ xlog_tic_add_region(xlog_ticket_t *tic, uint len, uint type) tic->t_res_num++; } +bool +xfs_log_writable ( +struct xfs_mount *mp) +{ +/* +* Never write to the log on norecovery mounts, if the block device is +* read-only, or if the filesystem is shutdown. Read-only mounts still +* allow internal writes for log recovery and unmount purposes, so don't +* restrict that case here. +*/ +if (mp->m_flags &XFS_MOUNT_NORECOVERY ) +return false; +if (xfs_readonly_buftarg (mp->m_log->l_targ)) +return false; +if (XFS_FORCED_SHUTDOWN (mp)) +return false; +return true; +} +/* * Replenish the byte reservation required by moving the grant write head. */
@@ -886,15 +905,8 @@ xfs_log_unmount_write( {struct xlog *log = mp->m_log; -/* -* Don't write out unmount record on norecovery mounts or ro devices. -* Or, if we are doing a forced umount (typically because of IO errors). -*/ -if (mp->m_flags &XFS_MOUNT_NORECOVERY || -xfs_readonly_buftarg (log->l_targ)) { -ASSERT (mp->m_flags &XFS_MOUNT_RDONLY ); +if (!xfs_log_writable (mp))return ; - }xfs_log_force (mp,XFS_LOG_SYNC );
fs/xfs/xfs_log.h +1 -0
@@ -127,6 +127,7 @@ int xfs_log_reserve(struct xfs_mount *mp,int xfs_log_regrant (struct xfs_mount *mp,struct xlog_ticket *tic);void xfs_log_unmount (struct xfs_mount *mp);int xfs_log_force_umount (struct xfs_mount *mp,int logerror); +bool xfs_log_writable (struct xfs_mount *mp);struct xlog_ticket *xfs_log_ticket_get (struct xlog_ticket *ticket);void xfs_log_ticket_put (struct xlog_ticket *ticket);
fs/xfs/xfs_mount.c +1 -2
@@ -1176,8 +1176,7 @@ xfs_fs_writable(int xfs_log_sbcount (xfs_mount_t *mp) { -/* allow this to proceed during the freeze sequence... */ -if (!xfs_fs_writable (mp,SB_FREEZE_COMPLETE )) +if (!xfs_log_writable (mp))return 0 ;/*
Signature · 1 line
2.26.2
Re: [PATCH 1/9] xfs: sync lazy sb accounting on quiesce of read-only mounts
Quoted 27 lines · Brian Foster
xfs_log_sbcount()syncs the superblock specifically to accumulate the in-core percpu superblock counters and commit them to disk. This is required to maintain filesystem consistency across quiesce (freeze, read-only mount/remount) or unmount when lazy superblock accounting is enabled because individual transactions do not update the superblock directly.This mechanism works as expected for writable mounts, but
xfs_log_sbcount()skips the update for read-only mounts. Read-only mounts otherwise still allow log recovery and write out an unmount record during log quiesce. If a read-only mount performs log recovery, it can modify the in-core superblock counters and write an unmount record when the filesystem unmounts without ever syncing the in-core counters. This leaves the filesystem with a clean log but in an inconsistent state with regard to lazy sb counters.Update
xfs_log_sbcount()to use the same logicxfs_log_unmount_write()uses to determine when to write an unmount record. We can drop the freeze state check because the update is already allowed during the freezing process and no context calls this function on an already frozen fs. This ensures that lazy accounting is always synced before the log is cleaned. Refactor this logic into a new helper to distinguish between a writable filesystem and a writable log. Specifically, the log is writable unless the filesystem is mounted with the norecovery mount option, the underlying log device is read-only, or the filesystem is shutdown.
Quoted 2 lines
Signed-off-by Brian Foster <[email protected]>Reviewed-by Gao Xiang <[email protected]>
Ok makes sense
Quoted 80 lines
--- fs/xfs/xfs_log.c | 28 ++++++++++++++++++++-------- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_mount.c | 3 +-- 3 files changed, 22 insertions(+), 10 deletions(-)fs/xfs/xfs_log.c +20
-8@@ -347,6 +347,25 @@ xlog_tic_add_region(xlog_ticket_t *tic, uint len, uint type) tic->t_res_num++; } +bool +xfs_log_writable ( +struct xfs_mount *mp) +{ +/* +* Never write to the log on norecovery mounts, if the block device is +* read-only, or if the filesystem is shutdown. Read-only mounts still +* allow internal writes for log recovery and unmount purposes, so don't +* restrict that case here. +*/ +if (mp->m_flags &XFS_MOUNT_NORECOVERY ) +return false; +if (xfs_readonly_buftarg (mp->m_log->l_targ)) +return false; +if (XFS_FORCED_SHUTDOWN (mp)) +return false; +return true; +} +/* * Replenish the byte reservation required by moving the grant write head. */ @@ -886,15 +905,8 @@ xfs_log_unmount_write( {struct xlog *log = mp->m_log; -/* -* Don't write out unmount record on norecovery mounts or ro devices. -* Or, if we are doing a forced umount (typically because of IO errors). -*/ -if (mp->m_flags &XFS_MOUNT_NORECOVERY || -xfs_readonly_buftarg (log->l_targ)) { -ASSERT (mp->m_flags &XFS_MOUNT_RDONLY ); +if (!xfs_log_writable (mp))return ; - }xfs_log_force (mp,XFS_LOG_SYNC );fs/xfs/xfs_log.h +1
-0@@ -127,6 +127,7 @@ int xfs_log_reserve(struct xfs_mount *mp,int xfs_log_regrant (struct xfs_mount *mp,struct xlog_ticket *tic);void xfs_log_unmount (struct xfs_mount *mp);int xfs_log_force_umount (struct xfs_mount *mp,int logerror); +bool xfs_log_writable (struct xfs_mount *mp);struct xlog_ticket *xfs_log_ticket_get (struct xlog_ticket *ticket);void xfs_log_ticket_put (struct xlog_ticket *ticket);fs/xfs/xfs_mount.c +1
-2@@ -1176,8 +1176,7 @@ xfs_fs_writable(int xfs_log_sbcount (xfs_mount_t *mp) { -/* allow this to proceed during the freeze sequence... */ -if (!xfs_fs_writable (mp,SB_FREEZE_COMPLETE )) +if (!xfs_log_writable (mp))return 0 ;/*
Re: [PATCH 1/9] xfs: sync lazy sb accounting on quiesce of read-only mounts
In reply to Brian FosterQuoted 27 lines · Brian Foster
xfs_log_sbcount()syncs the superblock specifically to accumulate the in-core percpu superblock counters and commit them to disk. This is required to maintain filesystem consistency across quiesce (freeze, read-only mount/remount) or unmount when lazy superblock accounting is enabled because individual transactions do not update the superblock directly.This mechanism works as expected for writable mounts, but
xfs_log_sbcount()skips the update for read-only mounts. Read-only mounts otherwise still allow log recovery and write out an unmount record during log quiesce. If a read-only mount performs log recovery, it can modify the in-core superblock counters and write an unmount record when the filesystem unmounts without ever syncing the in-core counters. This leaves the filesystem with a clean log but in an inconsistent state with regard to lazy sb counters.Update
xfs_log_sbcount()to use the same logicxfs_log_unmount_write()uses to determine when to write an unmount record. We can drop the freeze state check because the update is already allowed during the freezing process and no context calls this function on an already frozen fs. This ensures that lazy accounting is always synced before the log is cleaned. Refactor this logic into a new helper to distinguish between a writable filesystem and a writable log. Specifically, the log is writable unless the filesystem is mounted with the norecovery mount option, the underlying log device is read-only, or the filesystem is shutdown.
Quoted 2 lines
Signed-off-by Brian Foster <[email protected]>Reviewed-by Gao Xiang <[email protected]>
Looks good to me,
--D
Quoted 82 lines
--- fs/xfs/xfs_log.c | 28 ++++++++++++++++++++-------- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_mount.c | 3 +-- 3 files changed, 22 insertions(+), 10 deletions(-)fs/xfs/xfs_log.c +20
-8@@ -347,6 +347,25 @@ xlog_tic_add_region(xlog_ticket_t *tic, uint len, uint type) tic->t_res_num++; } +bool +xfs_log_writable ( +struct xfs_mount *mp) +{ +/* +* Never write to the log on norecovery mounts, if the block device is +* read-only, or if the filesystem is shutdown. Read-only mounts still +* allow internal writes for log recovery and unmount purposes, so don't +* restrict that case here. +*/ +if (mp->m_flags &XFS_MOUNT_NORECOVERY ) +return false; +if (xfs_readonly_buftarg (mp->m_log->l_targ)) +return false; +if (XFS_FORCED_SHUTDOWN (mp)) +return false; +return true; +} +/* * Replenish the byte reservation required by moving the grant write head. */ @@ -886,15 +905,8 @@ xfs_log_unmount_write( {struct xlog *log = mp->m_log; -/* -* Don't write out unmount record on norecovery mounts or ro devices. -* Or, if we are doing a forced umount (typically because of IO errors). -*/ -if (mp->m_flags &XFS_MOUNT_NORECOVERY || -xfs_readonly_buftarg (log->l_targ)) { -ASSERT (mp->m_flags &XFS_MOUNT_RDONLY ); +if (!xfs_log_writable (mp))return ; - }xfs_log_force (mp,XFS_LOG_SYNC );fs/xfs/xfs_log.h +1
-0@@ -127,6 +127,7 @@ int xfs_log_reserve(struct xfs_mount *mp,int xfs_log_regrant (struct xfs_mount *mp,struct xlog_ticket *tic);void xfs_log_unmount (struct xfs_mount *mp);int xfs_log_force_umount (struct xfs_mount *mp,int logerror); +bool xfs_log_writable (struct xfs_mount *mp);struct xlog_ticket *xfs_log_ticket_get (struct xlog_ticket *ticket);void xfs_log_ticket_put (struct xlog_ticket *ticket);fs/xfs/xfs_mount.c +1
-2@@ -1176,8 +1176,7 @@ xfs_fs_writable(int xfs_log_sbcount (xfs_mount_t *mp) { -/* allow this to proceed during the freeze sequence... */ -if (!xfs_fs_writable (mp,SB_FREEZE_COMPLETE )) +if (!xfs_log_writable (mp))return 0 ;/* Signature · 1 line
2.26.2
Re: [PATCH 1/9] xfs: sync lazy sb accounting on quiesce of read-only mounts
In reply to Brian FosterQuoted 3 lines · Brian Foster
Update
xfs_log_sbcount()to use the same logicxfs_log_unmount_write()uses to determine when to write an unmount record.
But it isn't the same old logic - a shutdown check is added as well.
Re: [PATCH 1/9] xfs: sync lazy sb accounting on quiesce of read-only mounts
Quoted 7 lines · Christoph Hellwig
Quoted 3 lines · Brian Foster
Update
xfs_log_sbcount()to use the same logicxfs_log_unmount_write()uses to determine when to write an unmount record.But it isn't the same old logic - a shutdown check is added as well.
xfs_log_unmount_write() does have a shutdown check, it just doesn't show up in the diff because I wanted to retain the post-log force check in that function (in the event that the force triggers a shutdown).
Brian
Re: [PATCH 1/9] xfs: sync lazy sb accounting on quiesce of read-only mounts
Quoted 3 lines · Brian Foster
xfs_log_unmount_write()does have a shutdown check, it just doesn't show up in the diff because I wanted to retain the post-log force check in that function (in the event that the force triggers a shutdown).
Ok. Maybe mention you are throwing in another shutdown check just because we can't have 'nough of them.
Re: [PATCH 1/9] xfs: sync lazy sb accounting on quiesce of read-only mounts
In reply to Brian FosterQuoted 27 lines · Brian Foster
xfs_log_sbcount()syncs the superblock specifically to accumulate the in-core percpu superblock counters and commit them to disk. This is required to maintain filesystem consistency across quiesce (freeze, read-only mount/remount) or unmount when lazy superblock accounting is enabled because individual transactions do not update the superblock directly.This mechanism works as expected for writable mounts, but
xfs_log_sbcount()skips the update for read-only mounts. Read-only mounts otherwise still allow log recovery and write out an unmount record during log quiesce. If a read-only mount performs log recovery, it can modify the in-core superblock counters and write an unmount record when the filesystem unmounts without ever syncing the in-core counters. This leaves the filesystem with a clean log but in an inconsistent state with regard to lazy sb counters.Update
xfs_log_sbcount()to use the same logicxfs_log_unmount_write()uses to determine when to write an unmount record. We can drop the freeze state check because the update is already allowed during the freezing process and no context calls this function on an already frozen fs. This ensures that lazy accounting is always synced before the log is cleaned. Refactor this logic into a new helper to distinguish between a writable filesystem and a writable log. Specifically, the log is writable unless the filesystem is mounted with the norecovery mount option, the underlying log device is read-only, or the filesystem is shutdown.
Quoted 2 lines
Signed-off-by Brian Foster <[email protected]>Reviewed-by Gao Xiang <[email protected]>
works for me.
Quoted 82 lines
--- fs/xfs/xfs_log.c | 28 ++++++++++++++++++++-------- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_mount.c | 3 +-- 3 files changed, 22 insertions(+), 10 deletions(-)fs/xfs/xfs_log.c +20
-8@@ -347,6 +347,25 @@ xlog_tic_add_region(xlog_ticket_t *tic, uint len, uint type) tic->t_res_num++; } +bool +xfs_log_writable ( +struct xfs_mount *mp) +{ +/* +* Never write to the log on norecovery mounts, if the block device is +* read-only, or if the filesystem is shutdown. Read-only mounts still +* allow internal writes for log recovery and unmount purposes, so don't +* restrict that case here. +*/ +if (mp->m_flags &XFS_MOUNT_NORECOVERY ) +return false; +if (xfs_readonly_buftarg (mp->m_log->l_targ)) +return false; +if (XFS_FORCED_SHUTDOWN (mp)) +return false; +return true; +} +/* * Replenish the byte reservation required by moving the grant write head. */ @@ -886,15 +905,8 @@ xfs_log_unmount_write( {struct xlog *log = mp->m_log; -/* -* Don't write out unmount record on norecovery mounts or ro devices. -* Or, if we are doing a forced umount (typically because of IO errors). -*/ -if (mp->m_flags &XFS_MOUNT_NORECOVERY || -xfs_readonly_buftarg (log->l_targ)) { -ASSERT (mp->m_flags &XFS_MOUNT_RDONLY ); +if (!xfs_log_writable (mp))return ; - }xfs_log_force (mp,XFS_LOG_SYNC );fs/xfs/xfs_log.h +1
-0@@ -127,6 +127,7 @@ int xfs_log_reserve(struct xfs_mount *mp,int xfs_log_regrant (struct xfs_mount *mp,struct xlog_ticket *tic);void xfs_log_unmount (struct xfs_mount *mp);int xfs_log_force_umount (struct xfs_mount *mp,int logerror); +bool xfs_log_writable (struct xfs_mount *mp);struct xlog_ticket *xfs_log_ticket_get (struct xlog_ticket *ticket);void xfs_log_ticket_put (struct xlog_ticket *ticket);fs/xfs/xfs_mount.c +1
-2@@ -1176,8 +1176,7 @@ xfs_fs_writable(int xfs_log_sbcount (xfs_mount_t *mp) { -/* allow this to proceed during the freeze sequence... */ -if (!xfs_fs_writable (mp,SB_FREEZE_COMPLETE )) +if (!xfs_log_writable (mp))return 0 ;/* Signature · 1 line
2.26.2
Re: [PATCH 1/9] xfs: sync lazy sb accounting on quiesce of read-only mounts
Quoted 28 lines · Bill O'Donnell
Quoted 27 lines · Brian Foster
xfs_log_sbcount()syncs the superblock specifically to accumulate the in-core percpu superblock counters and commit them to disk. This is required to maintain filesystem consistency across quiesce (freeze, read-only mount/remount) or unmount when lazy superblock accounting is enabled because individual transactions do not update the superblock directly.This mechanism works as expected for writable mounts, but
xfs_log_sbcount()skips the update for read-only mounts. Read-only mounts otherwise still allow log recovery and write out an unmount record during log quiesce. If a read-only mount performs log recovery, it can modify the in-core superblock counters and write an unmount record when the filesystem unmounts without ever syncing the in-core counters. This leaves the filesystem with a clean log but in an inconsistent state with regard to lazy sb counters.Update
xfs_log_sbcount()to use the same logicxfs_log_unmount_write()uses to determine when to write an unmount record. We can drop the freeze state check because the update is already allowed during the freezing process and no context calls this function on an already frozen fs. This ensures that lazy accounting is always synced before the log is cleaned. Refactor this logic into a new helper to distinguish between a writable filesystem and a writable log. Specifically, the log is writable unless the filesystem is mounted with the norecovery mount option, the underlying log device is read-only, or the filesystem is shutdown.
Quoted 5 lines
Quoted 2 lines
Signed-off-by Brian Foster <[email protected]>Reviewed-by Gao Xiang <[email protected]>works for me.
Reviewed-by Bill O'Donnell <[email protected]>
Does this also apply to the v3 series that Brian just sent?
--D
Quoted 84 lines
Quoted 83 lines
--- fs/xfs/xfs_log.c | 28 ++++++++++++++++++++-------- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_mount.c | 3 +-- 3 files changed, 22 insertions(+), 10 deletions(-)fs/xfs/xfs_log.c +20
-8@@ -347,6 +347,25 @@ xlog_tic_add_region(xlog_ticket_t *tic, uint len, uint type) tic->t_res_num++; } +bool +xfs_log_writable ( +struct xfs_mount *mp) +{ +/* +* Never write to the log on norecovery mounts, if the block device is +* read-only, or if the filesystem is shutdown. Read-only mounts still +* allow internal writes for log recovery and unmount purposes, so don't +* restrict that case here. +*/ +if (mp->m_flags &XFS_MOUNT_NORECOVERY ) +return false; +if (xfs_readonly_buftarg (mp->m_log->l_targ)) +return false; +if (XFS_FORCED_SHUTDOWN (mp)) +return false; +return true; +} +/* * Replenish the byte reservation required by moving the grant write head. */ @@ -886,15 +905,8 @@ xfs_log_unmount_write( {struct xlog *log = mp->m_log; -/* -* Don't write out unmount record on norecovery mounts or ro devices. -* Or, if we are doing a forced umount (typically because of IO errors). -*/ -if (mp->m_flags &XFS_MOUNT_NORECOVERY || -xfs_readonly_buftarg (log->l_targ)) { -ASSERT (mp->m_flags &XFS_MOUNT_RDONLY ); +if (!xfs_log_writable (mp))return ; - }xfs_log_force (mp,XFS_LOG_SYNC );fs/xfs/xfs_log.h +1
-0@@ -127,6 +127,7 @@ int xfs_log_reserve(struct xfs_mount *mp,int xfs_log_regrant (struct xfs_mount *mp,struct xlog_ticket *tic);void xfs_log_unmount (struct xfs_mount *mp);int xfs_log_force_umount (struct xfs_mount *mp,int logerror); +bool xfs_log_writable (struct xfs_mount *mp);struct xlog_ticket *xfs_log_ticket_get (struct xlog_ticket *ticket);void xfs_log_ticket_put (struct xlog_ticket *ticket);fs/xfs/xfs_mount.c +1
-2@@ -1176,8 +1176,7 @@ xfs_fs_writable(int xfs_log_sbcount (xfs_mount_t *mp) { -/* allow this to proceed during the freeze sequence... */ -if (!xfs_fs_writable (mp,SB_FREEZE_COMPLETE )) +if (!xfs_log_writable (mp))return 0 ;/* Signature · 1 line
2.26.2
Re: [PATCH 1/9] xfs: sync lazy sb accounting on quiesce of read-only mounts
Quoted 29 lines · Darrick J. Wong
Quoted 28 lines · Bill O'Donnell
Quoted 27 lines · Brian Foster
xfs_log_sbcount()syncs the superblock specifically to accumulate the in-core percpu superblock counters and commit them to disk. This is required to maintain filesystem consistency across quiesce (freeze, read-only mount/remount) or unmount when lazy superblock accounting is enabled because individual transactions do not update the superblock directly.This mechanism works as expected for writable mounts, but
xfs_log_sbcount()skips the update for read-only mounts. Read-only mounts otherwise still allow log recovery and write out an unmount record during log quiesce. If a read-only mount performs log recovery, it can modify the in-core superblock counters and write an unmount record when the filesystem unmounts without ever syncing the in-core counters. This leaves the filesystem with a clean log but in an inconsistent state with regard to lazy sb counters.Update
xfs_log_sbcount()to use the same logicxfs_log_unmount_write()uses to determine when to write an unmount record. We can drop the freeze state check because the update is already allowed during the freezing process and no context calls this function on an already frozen fs. This ensures that lazy accounting is always synced before the log is cleaned. Refactor this logic into a new helper to distinguish between a writable filesystem and a writable log. Specifically, the log is writable unless the filesystem is mounted with the norecovery mount option, the underlying log device is read-only, or the filesystem is shutdown.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Signed-off-by Brian Foster <[email protected]>Reviewed-by Gao Xiang <[email protected]>works for me.
Reviewed-by Bill O'Donnell <[email protected]>Does this also apply to the v3 series that Brian just sent?
I only used this patch 1/9, as that was all I was focusing on.
Quoted 88 lines
--D
Quoted 84 lines
Quoted 83 lines
--- fs/xfs/xfs_log.c | 28 ++++++++++++++++++++-------- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_mount.c | 3 +-- 3 files changed, 22 insertions(+), 10 deletions(-)fs/xfs/xfs_log.c +20
-8@@ -347,6 +347,25 @@ xlog_tic_add_region(xlog_ticket_t *tic, uint len, uint type) tic->t_res_num++; } +bool +xfs_log_writable ( +struct xfs_mount *mp) +{ +/* +* Never write to the log on norecovery mounts, if the block device is +* read-only, or if the filesystem is shutdown. Read-only mounts still +* allow internal writes for log recovery and unmount purposes, so don't +* restrict that case here. +*/ +if (mp->m_flags &XFS_MOUNT_NORECOVERY ) +return false; +if (xfs_readonly_buftarg (mp->m_log->l_targ)) +return false; +if (XFS_FORCED_SHUTDOWN (mp)) +return false; +return true; +} +/* * Replenish the byte reservation required by moving the grant write head. */ @@ -886,15 +905,8 @@ xfs_log_unmount_write( {struct xlog *log = mp->m_log; -/* -* Don't write out unmount record on norecovery mounts or ro devices. -* Or, if we are doing a forced umount (typically because of IO errors). -*/ -if (mp->m_flags &XFS_MOUNT_NORECOVERY || -xfs_readonly_buftarg (log->l_targ)) { -ASSERT (mp->m_flags &XFS_MOUNT_RDONLY ); +if (!xfs_log_writable (mp))return ; - }xfs_log_force (mp,XFS_LOG_SYNC );fs/xfs/xfs_log.h +1
-0@@ -127,6 +127,7 @@ int xfs_log_reserve(struct xfs_mount *mp,int xfs_log_regrant (struct xfs_mount *mp,struct xlog_ticket *tic);void xfs_log_unmount (struct xfs_mount *mp);int xfs_log_force_umount (struct xfs_mount *mp,int logerror); +bool xfs_log_writable (struct xfs_mount *mp);struct xlog_ticket *xfs_log_ticket_get (struct xlog_ticket *ticket);void xfs_log_ticket_put (struct xlog_ticket *ticket);fs/xfs/xfs_mount.c +1
-2@@ -1176,8 +1176,7 @@ xfs_fs_writable(int xfs_log_sbcount (xfs_mount_t *mp) { -/* allow this to proceed during the freeze sequence... */ -if (!xfs_fs_writable (mp,SB_FREEZE_COMPLETE )) +if (!xfs_log_writable (mp))return 0 ;/* Signature · 1 line
2.26.2
PATCH 2/9 xfs: lift writable fs check up into log worker task
In reply to Brian FosterThe log covering helper checks whether the filesystem is writable to determine whether to cover the log. The helper is currently only called from the background log worker. In preparation to reuse the helper from freezing contexts, lift the check into xfs_log_worker().
--- fs/xfs/xfs_log.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
fs/xfs/xfs_log.c +5 -7
@@ -1050,13 +1050,11 @@ xfs_log_space_wake(* can't start trying to idle the log until both the CIL and AIL are empty. */ static int -xfs_log_need_covered (xfs_mount_t *mp) +xfs_log_need_covered ( +struct xfs_mount *mp) { -struct xlog *log = mp->m_log; -int needed =0 ; - -if (!xfs_fs_writable (mp,SB_FREEZE_WRITE )) -return 0 ; +struct xlog *log = mp->m_log; +int needed =0 ;if (!xlog_cil_empty (log))return 0 ;
@@ -1271,7 +1269,7 @@ xfs_log_worker(struct xfs_mount *mp = log->l_mp;/* dgc: errors ignored - not fatal and nowhere to report them */ -if (xfs_log_need_covered (mp)) { +if (xfs_fs_writable (mp,SB_FREEZE_WRITE ) &&xfs_log_need_covered (mp)) {/* * Dump a transaction into the log that contains no real change. * This is needed to stamp the current tail LSN into the log
Signature · 1 line
2.26.2
Re: [PATCH 2/9] xfs: lift writable fs check up into log worker task
Quoted 6 lines · Brian Foster
The log covering helper checks whether the filesystem is writable to determine whether to cover the log. The helper is currently only called from the background log worker. In preparation to reuse the helper from freezing contexts, lift the check into
xfs_log_worker().Signed-off-by Brian Foster <[email protected]>
Looks straight forward
Quoted 36 lines
--- fs/xfs/xfs_log.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)fs/xfs/xfs_log.c +5
-7@@ -1050,13 +1050,11 @@ xfs_log_space_wake(* can't start trying to idle the log until both the CIL and AIL are empty. */ static int -xfs_log_need_covered (xfs_mount_t *mp) +xfs_log_need_covered ( +struct xfs_mount *mp) { -struct xlog *log = mp->m_log; -int needed =0 ; - -if (!xfs_fs_writable (mp,SB_FREEZE_WRITE )) -return 0 ; +struct xlog *log = mp->m_log; +int needed =0 ;if (!xlog_cil_empty (log))return 0 ;@@ -1271,7 +1269,7 @@ xfs_log_worker(struct xfs_mount *mp = log->l_mp;/* dgc: errors ignored - not fatal and nowhere to report them */ -if (xfs_log_need_covered (mp)) { +if (xfs_fs_writable (mp,SB_FREEZE_WRITE ) &&xfs_log_need_covered (mp)) {/* * Dump a transaction into the log that contains no real change. * This is needed to stamp the current tail LSN into the log
Re: [PATCH 2/9] xfs: lift writable fs check up into log worker task
In reply to Brian FosterQuoted 15 lines · Brian Foster
The log covering helper checks whether the filesystem is writable to determine whether to cover the log. The helper is currently only called from the background log worker. In preparation to reuse the helper from freezing contexts, lift the check into
xfs_log_worker().Signed-off-by Brian Foster <[email protected]>--- fs/xfs/xfs_log.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)fs/xfs/xfs_log.c +0
-0
fs/xfs/xfs_log.c xfs_log_space_wake( · line 1052
Quoted 3 lines
fs/xfs/xfs_log.c +0
-0@@ -1050,13 +1050,11 @@ xfs_log_space_wake(* can't start trying to idle the log until both the CIL and AIL are empty. */ static int
I think this is a predicate, right? Should this function return a bool instead of an int?
This function always confuses me slightly since it pushes us through the covering state machine, and (I think) assumes that someone will force the CIL and push the AIL if it returns zero. :)
To check my thinking further-- back in that thread I started about setting and clearing log incompat flags, I think Dave was pushing me to clear the log incompat flags just before we call xfs_sync_sb when the log is in NEED2 state, right?
AFAICT the net effect of this series is to reorder the log code so that xfs_log_quiesce covers the log (force cil, push ail, log two transactions containing only the superblock), and adds an xfs_log_clean that quiesces the log and then writes an unmount record after that.
Two callers whose behavior does not change with this series are: 1) The log worker quiesces the log when it's idle; and 2) unmount quiesces the log and then writes an unmount record so that the next mount knows it can skip replay entirely.
The big difference is 3) freeze now only covers the log, whereas before it would cover, write an unmount record, and immediately redirty the log to force replay of the snapshot, right?
Assuming I understood all that, my next question is: Eric Sandeen was working on a patchset to process unlinked inodes unconditionally on mount so that frozen fs images can be written out with the unmount record (because I guess people make ro snapshots of live fs images and then balk when they have to make the snapshot rw to run log recovery. Any thoughts about /that/? :)
--D
Quoted 26 lines
fs/xfs/xfs_log.c +5
-7-xfs_log_need_covered(xfs_mount_t *mp) +xfs_log_need_covered ( + struct xfs_mount *mp) { -struct xlog *log = mp->m_log; -int needed =0 ; - -if (!xfs_fs_writable (mp,SB_FREEZE_WRITE )) -return 0 ; +struct xlog *log = mp->m_log; +int needed =0 ;if (!xlog_cil_empty (log))return 0 ;@@ -1271,7 +1269,7 @@ xfs_log_worker(struct xfs_mount *mp = log->l_mp;/* dgc: errors ignored - not fatal and nowhere to report them */ -if (xfs_log_need_covered (mp)) { +if (xfs_fs_writable (mp,SB_FREEZE_WRITE ) &&xfs_log_need_covered (mp)) {/* * Dump a transaction into the log that contains no real change. * This is needed to stamp the current tail LSN into the log Signature · 1 line
2.26.2
Re: [PATCH 2/9] xfs: lift writable fs check up into log worker task
Quoted 11 lines · Darrick J. Wong
Quoted 10 lines · Brian Foster
The log covering helper checks whether the filesystem is writable to determine whether to cover the log. The helper is currently only called from the background log worker. In preparation to reuse the helper from freezing contexts, lift the check into
xfs_log_worker().Signed-off-by Brian Foster <[email protected]>--- fs/xfs/xfs_log.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
Quoted 12 lines
fs/xfs/xfs_log.c xfs_log_space_wake( · line 1052
Quoted 8 lines
fs/xfs/xfs_log.c +0
-0@@ -1050,13 +1050,11 @@ xfs_log_space_wake(* can't start trying to idle the log until both the CIL and AIL are empty. */ static intI think this is a predicate, right? Should this function return a bool instead of an int?
Yes, we could change that to return a bool.
Quoted 4 lines
This function always confuses me slightly since it pushes us through the covering state machine, and (I think) assumes that someone will force the CIL and push the AIL if it returns zero. :)
It basically assumes that the caller will issue a covering commit (xfs_sync_sb()) if indicated, and so progresses ->l_covered_state along in anticipation of that (i.e. NEED -> DONE). The log subsystem side detects that covering commit and makes further state changes (such as DONE -> NEED2) for the next time around in the background worker.
Quoted 5 lines
To check my thinking further-- back in that thread I started about setting and clearing log incompat flags, I think Dave was pushing me to clear the log incompat flags just before we call
xfs_sync_sbwhen the log is in NEED2 state, right?
In general, I think so. I don't think it technically has to be NEED2 (as opposed to NEED || NEED2), but in general the idea is to make any such final superblock updates in-core just before the quiesce completes and allow the log covering sequence to commit it for us. This is similar to how this series handles the lazy superblock counters (with the caveat that that stuff just happened to already be implemented inside xfs_sync_sb()).
FWIW, we could also enforce that such final superblock updates reset covered state of the log to NEED2 if we wanted to. I went back and forth on that a bit but decided to leave out unnecessary complexity for the first pass.
Quoted 5 lines
AFAICT the net effect of this series is to reorder the log code so that
xfs_log_quiescecovers the log (force cil, push ail, log two transactions containing only the superblock), and adds anxfs_log_cleanthat quiesces the log and then writes an unmount record after that.
Yep.
Quoted 5 lines
Two callers whose behavior does not change with this series are: 1) The log worker quiesces the log when it's idle; and 2) unmount quiesces the log and then writes an unmount record so that the next mount knows it can skip replay entirely.
Right, though just to be clear, quiesce never covered the log before this series. It effectively drained the log by forcing the log and pushing the AIL until empty, but then just wrote the unmount record to mark it clean...
Quoted 4 lines
The big difference is 3) freeze now only covers the log, whereas before it would cover, write an unmount record, and immediately redirty the log to force replay of the snapshot, right?
Yes. As above, unmount now also does a log cover -> unmount record instead of just writing the unmount record. This is harmless because we end up in the clean state either way, but I've tried to point this out in the commit logs and whatnot so it's apparent to reviewers. We could technically make the log cover during quiesce optional with a new parameter or something, but it just didn't seem worth it once we start overloading the covering sequence to handle things like lazy sb accounting (or log incompat bits, etc.).
Quoted 7 lines
Assuming I understood all that, my next question is: Eric Sandeen was working on a patchset to process unlinked inodes unconditionally on mount so that frozen fs images can be written out with the unmount record (because I guess people make ro snapshots of live fs images and then balk when they have to make the snapshot rw to run log recovery. Any thoughts about /that/? :)
Eric had mentioned that to me as well. I don't quite recall what the impediment to making that change was the last time around (Eric?), but my view was that is orthogonal to this series. IOW, the primary motivations for this series are to clean up the whole xfs_quiesce_attr() -> xfs_log_quiesce() mess and facilitate the reuse of covering for things like lazy sb accounting and log incompat bit management. We can decide whether to quiesce or clean the log on freeze independently and that's really only a single line tweak to the last patch of the series (i.e., continue to clean the log and just don't redirty it).
Brian
Quoted 29 lines
--D
Quoted 26 lines
fs/xfs/xfs_log.c +5
-7-xfs_log_need_covered(xfs_mount_t *mp) +xfs_log_need_covered ( + struct xfs_mount *mp) { -struct xlog *log = mp->m_log; -int needed =0 ; - -if (!xfs_fs_writable (mp,SB_FREEZE_WRITE )) -return 0 ; +struct xlog *log = mp->m_log; +int needed =0 ;if (!xlog_cil_empty (log))return 0 ;@@ -1271,7 +1269,7 @@ xfs_log_worker(struct xfs_mount *mp = log->l_mp;/* dgc: errors ignored - not fatal and nowhere to report them */ -if (xfs_log_need_covered (mp)) { +if (xfs_fs_writable (mp,SB_FREEZE_WRITE ) &&xfs_log_need_covered (mp)) {/* * Dump a transaction into the log that contains no real change. * This is needed to stamp the current tail LSN into the log Signature · 1 line
2.26.2
Re: [PATCH 2/9] xfs: lift writable fs check up into log worker task
Quoted 71 lines · Brian Foster
Quoted 11 lines · Darrick J. Wong
Quoted 10 lines · Brian Foster
The log covering helper checks whether the filesystem is writable to determine whether to cover the log. The helper is currently only called from the background log worker. In preparation to reuse the helper from freezing contexts, lift the check into
xfs_log_worker().Signed-off-by Brian Foster <[email protected]>--- fs/xfs/xfs_log.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)Quoted 12 lines
fs/xfs/xfs_log.c xfs_log_space_wake( · line 1052
Quoted 8 lines
fs/xfs/xfs_log.c +0
-0@@ -1050,13 +1050,11 @@ xfs_log_space_wake(* can't start trying to idle the log until both the CIL and AIL are empty. */ static intI think this is a predicate, right? Should this function return a bool instead of an int?
Yes, we could change that to return a bool.
Quoted 4 lines
This function always confuses me slightly since it pushes us through the covering state machine, and (I think) assumes that someone will force the CIL and push the AIL if it returns zero. :)
It basically assumes that the caller will issue a covering commit (
xfs_sync_sb()) if indicated, and so progresses ->l_covered_state along in anticipation of that (i.e. NEED -> DONE). The log subsystem side detects that covering commit and makes further state changes (such as DONE -> NEED2) for the next time around in the background worker.Quoted 5 lines
To check my thinking further-- back in that thread I started about setting and clearing log incompat flags, I think Dave was pushing me to clear the log incompat flags just before we call
xfs_sync_sbwhen the log is in NEED2 state, right?In general, I think so. I don't think it technically has to be NEED2 (as opposed to NEED || NEED2), but in general the idea is to make any such final superblock updates in-core just before the quiesce completes and allow the log covering sequence to commit it for us. This is similar to how this series handles the lazy superblock counters (with the caveat that that stuff just happened to already be implemented inside
xfs_sync_sb()).FWIW, we could also enforce that such final superblock updates reset covered state of the log to NEED2 if we wanted to. I went back and forth on that a bit but decided to leave out unnecessary complexity for the first pass.
Quoted 5 lines
AFAICT the net effect of this series is to reorder the log code so that
xfs_log_quiescecovers the log (force cil, push ail, log two transactions containing only the superblock), and adds anxfs_log_cleanthat quiesces the log and then writes an unmount record after that.Yep.
Quoted 5 lines
Two callers whose behavior does not change with this series are: 1) The log worker quiesces the log when it's idle; and 2) unmount quiesces the log and then writes an unmount record so that the next mount knows it can skip replay entirely.
Quoted 4 lines
Right, though just to be clear, quiesce never covered the log before this series. It effectively drained the log by forcing the log and pushing the AIL until empty, but then just wrote the unmount record to mark it clean...
<nod> Right, I should've echoed that old quiesce only did force cil and push ail, so freeze and unmount do more now.
Quoted 22 lines
Quoted 4 lines
The big difference is 3) freeze now only covers the log, whereas before it would cover, write an unmount record, and immediately redirty the log to force replay of the snapshot, right?
Yes. As above, unmount now also does a log cover -> unmount record instead of just writing the unmount record. This is harmless because we end up in the clean state either way, but I've tried to point this out in the commit logs and whatnot so it's apparent to reviewers. We could technically make the log cover during quiesce optional with a new parameter or something, but it just didn't seem worth it once we start overloading the covering sequence to handle things like lazy sb accounting (or log incompat bits, etc.).
Quoted 7 lines
Assuming I understood all that, my next question is: Eric Sandeen was working on a patchset to process unlinked inodes unconditionally on mount so that frozen fs images can be written out with the unmount record (because I guess people make ro snapshots of live fs images and then balk when they have to make the snapshot rw to run log recovery. Any thoughts about /that/? :)
Quoted 9 lines
Eric had mentioned that to me as well. I don't quite recall what the impediment to making that change was the last time around (Eric?), but my view was that is orthogonal to this series. IOW, the primary motivations for this series are to clean up the whole
xfs_quiesce_attr()->xfs_log_quiesce()mess and facilitate the reuse of covering for things like lazy sb accounting and log incompat bit management. We can decide whether to quiesce or clean the log on freeze independently and that's really only a single line tweak to the last patch of the series (i.e., continue to clean the log and just don't redirty it).
Oh, it's totally orthogonal, but touched some of the same code parts. :)
IIRC I applied it then hit fstests regressions and kicked it out again.
--D
Quoted 32 lines
Brian
Quoted 29 lines
--D
Quoted 26 lines
fs/xfs/xfs_log.c +5
-7-xfs_log_need_covered(xfs_mount_t *mp) +xfs_log_need_covered ( + struct xfs_mount *mp) { -struct xlog *log = mp->m_log; -int needed =0 ; - -if (!xfs_fs_writable (mp,SB_FREEZE_WRITE )) -return 0 ; +struct xlog *log = mp->m_log; +int needed =0 ;if (!xlog_cil_empty (log))return 0 ;@@ -1271,7 +1269,7 @@ xfs_log_worker(struct xfs_mount *mp = log->l_mp;/* dgc: errors ignored - not fatal and nowhere to report them */ -if (xfs_log_need_covered (mp)) { +if (xfs_fs_writable (mp,SB_FREEZE_WRITE ) &&xfs_log_need_covered (mp)) {/* * Dump a transaction into the log that contains no real change. * This is needed to stamp the current tail LSN into the log Signature · 1 line
2.26.2
Re: [PATCH 2/9] xfs: lift writable fs check up into log worker task
In reply to Brian FosterQuoted 6 lines · Brian Foster
The log covering helper checks whether the filesystem is writable to determine whether to cover the log. The helper is currently only called from the background log worker. In preparation to reuse the helper from freezing contexts, lift the check into
xfs_log_worker().Signed-off-by Brian Foster <[email protected]>
Looks good,
PATCH 3/9 xfs: separate log cleaning from log quiesce
In reply to Brian FosterLog quiesce is currently associated with cleaning the log, which is accomplished by writing an unmount record as the last step of the quiesce sequence. The quiesce codepath is a bit convoluted in this regard due to how it is reused from various contexts. In preparation to create separate log cleaning and log covering interfaces, lift the write of the unmount record into a new cleaning helper and call that wherever xfs_log_quiesce() is currently invoked. No functional changes.
--- fs/xfs/xfs_log.c | 8 +++++++- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_super.c | 2 +- 3 files changed, 9 insertions(+), 2 deletions(-)
fs/xfs/xfs_log.c +7 -1
@@ -957,7 +957,13 @@ xfs_log_quiesce(xfs_wait_buftarg (mp->m_ddev_targp);xfs_buf_lock (mp->m_sb_bp);xfs_buf_unlock (mp->m_sb_bp); +} +void +xfs_log_clean ( +struct xfs_mount *mp) +{ +xfs_log_quiesce (mp);xfs_log_unmount_write (mp); }
@@ -972,7 +978,7 @@ voidxfs_log_unmount ( struct xfs_mount *mp) { -xfs_log_quiesce (mp); +xfs_log_clean (mp);xfs_trans_ail_destroy (mp);
fs/xfs/xfs_log.h +1 -0
@@ -139,6 +139,7 @@ bool xfs_log_item_in_current_chkpt(struct xfs_log_item *lip);void xfs_log_work_queue (struct xfs_mount *mp);void xfs_log_quiesce (struct xfs_mount *mp); +void xfs_log_clean (struct xfs_mount *mp);bool xfs_log_check_lsn (struct xfs_mount *,xfs_lsn_t );bool xfs_log_in_recovery (struct xfs_mount *);
fs/xfs/xfs_super.c +1 -1
@@ -897,7 +897,7 @@ xfs_quiesce_attr(if (error)xfs_warn (mp,"xfs_attr_quiesce: failed to log sb changes. " "Frozen image may not be consistent." ); -xfs_log_quiesce (mp); +xfs_log_clean (mp); }/*
Signature · 1 line
2.26.2
Re: [PATCH 3/9] xfs: separate log cleaning from log quiesce
Quoted 10 lines · Brian Foster
Log quiesce is currently associated with cleaning the log, which is accomplished by writing an unmount record as the last step of the quiesce sequence. The quiesce codepath is a bit convoluted in this regard due to how it is reused from various contexts. In preparation to create separate log cleaning and log covering interfaces, lift the write of the unmount record into a new cleaning helper and call that wherever
xfs_log_quiesce()is currently invoked. No functional changes.Signed-off-by Brian Foster <[email protected]>
Looks ok to me
Quoted 59 lines
--- fs/xfs/xfs_log.c | 8 +++++++- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_super.c | 2 +- 3 files changed, 9 insertions(+), 2 deletions(-)fs/xfs/xfs_log.c +7
-1@@ -957,7 +957,13 @@ xfs_log_quiesce(xfs_wait_buftarg (mp->m_ddev_targp);xfs_buf_lock (mp->m_sb_bp);xfs_buf_unlock (mp->m_sb_bp); +} +void +xfs_log_clean ( +struct xfs_mount *mp) +{ +xfs_log_quiesce (mp);xfs_log_unmount_write (mp); }@@ -972,7 +978,7 @@ voidxfs_log_unmount ( struct xfs_mount *mp) { -xfs_log_quiesce (mp); +xfs_log_clean (mp);xfs_trans_ail_destroy (mp);fs/xfs/xfs_log.h +1
-0@@ -139,6 +139,7 @@ bool xfs_log_item_in_current_chkpt(struct xfs_log_item *lip);void xfs_log_work_queue (struct xfs_mount *mp);void xfs_log_quiesce (struct xfs_mount *mp); +void xfs_log_clean (struct xfs_mount *mp);bool xfs_log_check_lsn (struct xfs_mount *,xfs_lsn_t );bool xfs_log_in_recovery (struct xfs_mount *);fs/xfs/xfs_super.c +1
-1@@ -897,7 +897,7 @@ xfs_quiesce_attr(if (error)xfs_warn (mp,"xfs_attr_quiesce: failed to log sb changes. " "Frozen image may not be consistent." ); -xfs_log_quiesce (mp); +xfs_log_clean (mp); }/*
Re: [PATCH 3/9] xfs: separate log cleaning from log quiesce
In reply to Brian FosterQuoted 10 lines · Brian Foster
Log quiesce is currently associated with cleaning the log, which is accomplished by writing an unmount record as the last step of the quiesce sequence. The quiesce codepath is a bit convoluted in this regard due to how it is reused from various contexts. In preparation to create separate log cleaning and log covering interfaces, lift the write of the unmount record into a new cleaning helper and call that wherever
xfs_log_quiesce()is currently invoked. No functional changes.Signed-off-by Brian Foster <[email protected]>
Assuming the stuff I rambled about in my reply to patch 2 wasn't a total braino,
--D
Quoted 61 lines
--- fs/xfs/xfs_log.c | 8 +++++++- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_super.c | 2 +- 3 files changed, 9 insertions(+), 2 deletions(-)fs/xfs/xfs_log.c +7
-1@@ -957,7 +957,13 @@ xfs_log_quiesce(xfs_wait_buftarg (mp->m_ddev_targp);xfs_buf_lock (mp->m_sb_bp);xfs_buf_unlock (mp->m_sb_bp); +} +void +xfs_log_clean ( +struct xfs_mount *mp) +{ +xfs_log_quiesce (mp);xfs_log_unmount_write (mp); }@@ -972,7 +978,7 @@ voidxfs_log_unmount ( struct xfs_mount *mp) { -xfs_log_quiesce (mp); +xfs_log_clean (mp);xfs_trans_ail_destroy (mp);fs/xfs/xfs_log.h +1
-0@@ -139,6 +139,7 @@ bool xfs_log_item_in_current_chkpt(struct xfs_log_item *lip);void xfs_log_work_queue (struct xfs_mount *mp);void xfs_log_quiesce (struct xfs_mount *mp); +void xfs_log_clean (struct xfs_mount *mp);bool xfs_log_check_lsn (struct xfs_mount *,xfs_lsn_t );bool xfs_log_in_recovery (struct xfs_mount *);fs/xfs/xfs_super.c +1
-1@@ -897,7 +897,7 @@ xfs_quiesce_attr(if (error)xfs_warn (mp,"xfs_attr_quiesce: failed to log sb changes. " "Frozen image may not be consistent." ); -xfs_log_quiesce (mp); +xfs_log_clean (mp); }/* Signature · 1 line
2.26.2
Re: [PATCH 3/9] xfs: separate log cleaning from log quiesce
In reply to Brian FosterQuoted 10 lines · Brian Foster
Log quiesce is currently associated with cleaning the log, which is accomplished by writing an unmount record as the last step of the quiesce sequence. The quiesce codepath is a bit convoluted in this regard due to how it is reused from various contexts. In preparation to create separate log cleaning and log covering interfaces, lift the write of the unmount record into a new cleaning helper and call that wherever
xfs_log_quiesce()is currently invoked. No functional changes.Signed-off-by Brian Foster <[email protected]>
Looks good,
PATCH 4/9 xfs: cover the log during log quiesce
In reply to Brian FosterThe log quiesce mechanism historically terminates by marking the log clean with an unmount record. The primary objective is to indicate that log recovery is no longer required after the quiesce has flushed all in-core changes and written back filesystem metadata. While this is perfectly fine, it is somewhat hacky as currently used in certain contexts. For example, filesystem freeze quiesces (i.e. cleans) the log and immediately redirties it with a dummy superblock transaction to ensure that log recovery runs in the event of a crash.
While this functions correctly, cleaning the log from freeze context is clearly superfluous given the current redirtying behavior. Instead, the desired behavior can be achieved by simply covering the log. This effectively retires all on-disk log items from the active range of the log by issuing two synchronous and sequential dummy superblock update transactions that serve to update the on-disk log head and tail. The subtle difference is that the log technically remains dirty due to the lack of an unmount record, though recovery is effectively a no-op due to the content of the checkpoints being clean (i.e. the unmodified on-disk superblock).
Log covering currently runs in the background and only triggers once the filesystem and log has idled. The purpose of the background mechanism is to prevent log recovery from replaying the most recently logged items long after those items may have been written back. In the quiesce path, the log has been deliberately idled by forcing the log and pushing the AIL until empty in a context where no further mutable filesystem operations are allowed. Therefore, we can cover the log as the final step in the log quiesce codepath to reflect that all previously active items have been successfully written back.
This facilitates selective log covering from certain contexts (i.e. freeze) that only seek to quiesce, but not necessarily clean the log. Note that as a side effect of this change, log covering now occurs when cleaning the log as well. This is harmless, facilitates subsequent cleanups, and is mostly temporary as various operations switch to use explicit log covering.
--- fs/xfs/xfs_log.c | 49 +++++++++++++++++++++++++++++++++++++++++++++--- fs/xfs/xfs_log.h | 2 +- 2 files changed, 47 insertions(+), 4 deletions(-)
fs/xfs/xfs_log.c +46 -3
@@ -91,6 +91,9 @@ STATIC intxlog_iclogs_empty ( struct xlog *log); +static int +xfs_log_cover (struct xfs_mount *); + static void xlog_grant_sub_space( struct xlog *log,
@@ -936,10 +939,9 @@ xfs_log_unmount_write(* To do this, we first need to shut down the background log work so it is not * trying to cover the log as we clean up. We then need to unpin all objects in * the log so we can then flush them out. Once they have completed their IO and -* run the callbacks removing themselves from the AIL, we can write the unmount -* record. +* run the callbacks removing themselves from the AIL, we can cover the log. */ -void +int xfs_log_quiesce (struct xfs_mount *mp) {
@@ -957,6 +959,8 @@ xfs_log_quiesce(xfs_wait_buftarg (mp->m_ddev_targp);xfs_buf_lock (mp->m_sb_bp);xfs_buf_unlock (mp->m_sb_bp); + +return xfs_log_cover (mp); }void
@@ -1092,6 +1096,45 @@ xfs_log_need_covered(return needed; } +/* +* Explicitly cover the log. This is similar to background log covering but +* intended for usage in quiesce codepaths. The caller is responsible to ensure +* the log is idle and suitable for covering. The CIL, iclog buffers and AIL +* must all be empty. +*/ +static int +xfs_log_cover ( +struct xfs_mount *mp) +{ +struct xlog *log = mp->m_log; +int error =0 ; + +ASSERT ((xlog_cil_empty (log) &&xlog_iclogs_empty (log) && + !xfs_ail_min_lsn (log->l_ailp)) || +XFS_FORCED_SHUTDOWN (mp)); + +if (!xfs_log_writable (mp)) +return 0 ; + +/* +* To cover the log, commit the superblock twice (at most) in +* independent checkpoints. The first serves as a reference for the +* tail pointer. The sync transaction and AIL push empties the AIL and +* updates the in-core tail to the LSN of the first checkpoint. The +* second commit updates the on-disk tail with the in-core LSN, +* covering the log. Push the AIL one more time to leave it empty, as +* we found it. +*/ +while (xfs_log_need_covered (mp)) { + error =xfs_sync_sb (mp, true); +if (error) +break ; +xfs_ail_push_all_sync (mp->m_ail); + } + +return error; +} +/* * We may be holding the log iclog lock upon entering this routine. */
fs/xfs/xfs_log.h +1 -1
@@ -138,7 +138,7 @@ void xlog_cil_process_committed(struct list_head *list);bool xfs_log_item_in_current_chkpt (struct xfs_log_item *lip);void xfs_log_work_queue (struct xfs_mount *mp); -void xfs_log_quiesce (struct xfs_mount *mp); +int xfs_log_quiesce (struct xfs_mount *mp);void xfs_log_clean (struct xfs_mount *mp);bool xfs_log_check_lsn (struct xfs_mount *,xfs_lsn_t );bool xfs_log_in_recovery (struct xfs_mount *);
Signature · 1 line
2.26.2
Re: [PATCH 4/9] xfs: cover the log during log quiesce
Quoted 104 lines · Brian Foster
The log quiesce mechanism historically terminates by marking the log clean with an unmount record. The primary objective is to indicate that log recovery is no longer required after the quiesce has flushed all in-core changes and written back filesystem metadata. While this is perfectly fine, it is somewhat hacky as currently used in certain contexts. For example, filesystem freeze quiesces (i.e. cleans) the log and immediately redirties it with a dummy superblock transaction to ensure that log recovery runs in the event of a crash.
While this functions correctly, cleaning the log from freeze context is clearly superfluous given the current redirtying behavior. Instead, the desired behavior can be achieved by simply covering the log. This effectively retires all on-disk log items from the active range of the log by issuing two synchronous and sequential dummy superblock update transactions that serve to update the on-disk log head and tail. The subtle difference is that the log technically remains dirty due to the lack of an unmount record, though recovery is effectively a no-op due to the content of the checkpoints being clean (i.e. the unmodified on-disk superblock).
Log covering currently runs in the background and only triggers once the filesystem and log has idled. The purpose of the background mechanism is to prevent log recovery from replaying the most recently logged items long after those items may have been written back. In the quiesce path, the log has been deliberately idled by forcing the log and pushing the AIL until empty in a context where no further mutable filesystem operations are allowed. Therefore, we can cover the log as the final step in the log quiesce codepath to reflect that all previously active items have been successfully written back.
This facilitates selective log covering from certain contexts (i.e. freeze) that only seek to quiesce, but not necessarily clean the log. Note that as a side effect of this change, log covering now occurs when cleaning the log as well. This is harmless, facilitates subsequent cleanups, and is mostly temporary as various operations switch to use explicit log covering.
Signed-off-by Brian Foster <[email protected]>--- fs/xfs/xfs_log.c | 49 +++++++++++++++++++++++++++++++++++++++++++++--- fs/xfs/xfs_log.h | 2 +- 2 files changed, 47 insertions(+), 4 deletions(-)fs/xfs/xfs_log.c +26
-3@@ -91,6 +91,9 @@ STATIC intxlog_iclogs_empty ( struct xlog *log); +static int +xfs_log_cover (struct xfs_mount *); + static void xlog_grant_sub_space( struct xlog *log,@@ -936,10 +939,9 @@ xfs_log_unmount_write(* To do this, we first need to shut down the background log work so it is not * trying to cover the log as we clean up. We then need to unpin all objects in * the log so we can then flush them out. Once they have completed their IO and -* run the callbacks removing themselves from the AIL, we can write the unmount -* record. +* run the callbacks removing themselves from the AIL, we can cover the log. */ -void +int xfs_log_quiesce (struct xfs_mount *mp) {@@ -957,6 +959,8 @@ xfs_log_quiesce(xfs_wait_buftarg (mp->m_ddev_targp);xfs_buf_lock (mp->m_sb_bp);xfs_buf_unlock (mp->m_sb_bp); + +return xfs_log_cover (mp); }void @@ -1092,6 +1096,45 @@ xfs_log_need_covered(return needed; } +/* +* Explicitly cover the log. This is similar to background log covering but +* intended for usage in quiesce codepaths. The caller is responsible to ensure +* the log is idle and suitable for covering. The CIL, iclog buffers and AIL +* must all be empty. +*/ +static int +xfs_log_cover ( +struct xfs_mount *mp) +{ +struct xlog *log = mp->m_log; +int error =0 ; + +ASSERT ((xlog_cil_empty (log) &&xlog_iclogs_empty (log) && + !xfs_ail_min_lsn (log->l_ailp)) || +XFS_FORCED_SHUTDOWN (mp)); + +if (!xfs_log_writable (mp)) +return 0 ;
fs/xfs/xfs_log.c xfs_log_need_covered( · line 1127
Quoted 10 lines
fs/xfs/xfs_log.c +10
-0+ +/* +* To cover the log, commit the superblock twice (at most) in +* independent checkpoints. The first serves as a reference for the +* tail pointer. The sync transaction and AIL push empties the AIL and +* updates the in-core tail to the LSN of the first checkpoint. The +* second commit updates the on-disk tail with the in-core LSN, +* covering the log. Push the AIL one more time to leave it empty, as +* we found it. +*/
Hm. At first I looked at _need_covered and wondered how this could work properly if we are in state DONE or DONE2, because this not-quite predicate returns zero in that case.
I think it's the case that the only way the log can end up in DONE state is if the background log worker had previously been in NEED, written the first of the dummy transactions, moved the state to DONE, and waited for xlog_covered_state to move the log from DONE to NEED2. Similarly, the log can only be in DONE2 state if the background worker wrote the second dummy and is now waiting for xlog_covered_state to move the log from DONE2 to IDLE.
Since xfs_log_quiesce cancelled the log worker and waited for it to finish before calling xfs_log_cover, the covering state here can only be IDLE, NEED, or NEED2, right? And hence the while loop pushes the log to IDLE no matter where it is now, right?
(I also wondered why this isn't a do-while loop but patch 6 addresses that.)
--D
Quoted 29 lines
fs/xfs/xfs_log.c +10
-0+while (xfs_log_need_covered (mp)) { + error =xfs_sync_sb (mp, true); +if (error) +break ; +xfs_ail_push_all_sync (mp->m_ail); + } + +return error; +} +/* * We may be holding the log iclog lock upon entering this routine. */ fs/xfs/xfs_log.h +1
-1@@ -138,7 +138,7 @@ void xlog_cil_process_committed(struct list_head *list);bool xfs_log_item_in_current_chkpt (struct xfs_log_item *lip);void xfs_log_work_queue (struct xfs_mount *mp); -void xfs_log_quiesce (struct xfs_mount *mp); +int xfs_log_quiesce (struct xfs_mount *mp);void xfs_log_clean (struct xfs_mount *mp);bool xfs_log_check_lsn (struct xfs_mount *,xfs_lsn_t );bool xfs_log_in_recovery (struct xfs_mount *);Signature · 1 line
2.26.2
Re: [PATCH 4/9] xfs: cover the log during log quiesce
Quoted 128 lines · Darrick J. Wong
Quoted 104 lines · Brian Foster
The log quiesce mechanism historically terminates by marking the log clean with an unmount record. The primary objective is to indicate that log recovery is no longer required after the quiesce has flushed all in-core changes and written back filesystem metadata. While this is perfectly fine, it is somewhat hacky as currently used in certain contexts. For example, filesystem freeze quiesces (i.e. cleans) the log and immediately redirties it with a dummy superblock transaction to ensure that log recovery runs in the event of a crash.
While this functions correctly, cleaning the log from freeze context is clearly superfluous given the current redirtying behavior. Instead, the desired behavior can be achieved by simply covering the log. This effectively retires all on-disk log items from the active range of the log by issuing two synchronous and sequential dummy superblock update transactions that serve to update the on-disk log head and tail. The subtle difference is that the log technically remains dirty due to the lack of an unmount record, though recovery is effectively a no-op due to the content of the checkpoints being clean (i.e. the unmodified on-disk superblock).
Log covering currently runs in the background and only triggers once the filesystem and log has idled. The purpose of the background mechanism is to prevent log recovery from replaying the most recently logged items long after those items may have been written back. In the quiesce path, the log has been deliberately idled by forcing the log and pushing the AIL until empty in a context where no further mutable filesystem operations are allowed. Therefore, we can cover the log as the final step in the log quiesce codepath to reflect that all previously active items have been successfully written back.
This facilitates selective log covering from certain contexts (i.e. freeze) that only seek to quiesce, but not necessarily clean the log. Note that as a side effect of this change, log covering now occurs when cleaning the log as well. This is harmless, facilitates subsequent cleanups, and is mostly temporary as various operations switch to use explicit log covering.
Signed-off-by Brian Foster <[email protected]>--- fs/xfs/xfs_log.c | 49 +++++++++++++++++++++++++++++++++++++++++++++--- fs/xfs/xfs_log.h | 2 +- 2 files changed, 47 insertions(+), 4 deletions(-)fs/xfs/xfs_log.c +26
-3@@ -91,6 +91,9 @@ STATIC intxlog_iclogs_empty ( struct xlog *log); +static int +xfs_log_cover (struct xfs_mount *); + static void xlog_grant_sub_space( struct xlog *log,@@ -936,10 +939,9 @@ xfs_log_unmount_write(* To do this, we first need to shut down the background log work so it is not * trying to cover the log as we clean up. We then need to unpin all objects in * the log so we can then flush them out. Once they have completed their IO and -* run the callbacks removing themselves from the AIL, we can write the unmount -* record. +* run the callbacks removing themselves from the AIL, we can cover the log. */ -void +int xfs_log_quiesce (struct xfs_mount *mp) {@@ -957,6 +959,8 @@ xfs_log_quiesce(xfs_wait_buftarg (mp->m_ddev_targp);xfs_buf_lock (mp->m_sb_bp);xfs_buf_unlock (mp->m_sb_bp); + +return xfs_log_cover (mp); }void @@ -1092,6 +1096,45 @@ xfs_log_need_covered(return needed; } +/* +* Explicitly cover the log. This is similar to background log covering but +* intended for usage in quiesce codepaths. The caller is responsible to ensure +* the log is idle and suitable for covering. The CIL, iclog buffers and AIL +* must all be empty. +*/ +static int +xfs_log_cover ( +struct xfs_mount *mp) +{ +struct xlog *log = mp->m_log; +int error =0 ; + +ASSERT ((xlog_cil_empty (log) &&xlog_iclogs_empty (log) && + !xfs_ail_min_lsn (log->l_ailp)) || +XFS_FORCED_SHUTDOWN (mp)); + +if (!xfs_log_writable (mp)) +return 0 ;fs/xfs/xfs_log.c xfs_log_need_covered( · line 1127
Quoted 10 lines
fs/xfs/xfs_log.c +10
-0+ +/* +* To cover the log, commit the superblock twice (at most) in +* independent checkpoints. The first serves as a reference for the +* tail pointer. The sync transaction and AIL push empties the AIL and +* updates the in-core tail to the LSN of the first checkpoint. The +* second commit updates the on-disk tail with the in-core LSN, +* covering the log. Push the AIL one more time to leave it empty, as +* we found it. +*/ Hm. At first I looked at
_need_coveredand wondered how this could work properly if we are in state DONE or DONE2, because this not-quite predicate returns zero in that case.I think it's the case that the only way the log can end up in DONE state is if the background log worker had previously been in NEED, written the first of the dummy transactions, moved the state to DONE, and waited for
xlog_covered_stateto move the log from DONE to NEED2. Similarly, the log can only be in DONE2 state if the background worker wrote the second dummy and is now waiting forxlog_covered_stateto move the log from DONE2 to IDLE.
Quoted 5 lines
Since
xfs_log_quiescecancelled the log worker and waited for it to finish before callingxfs_log_cover, the covering state here can only be IDLE, NEED, or NEED2, right? And hence the while loop pushes the log to IDLE no matter where it is now, right?
Yeah, we're in a quiescent context at this point where no other transactions are running, the in-core structures should be drained and the background log worker cancelled, etc. With regard to the background log worker, I don't think it should ever actually see the DONE or DONE2 states as it sets those states and immediately issues the synchronous sb transaction. Therefore, the commit should have changed the state from DONE to NEED2 or NEED (if other items happened to land in the log) before it returns.
That said, I suppose it wouldn't be that surprising if some odd timing scenario or combination of external superblock commits could cause the background log worker to see a DONE state. I haven't fully audited for that, but regardless it would appropriately do nothing and that shouldn't be an issue from the quiesce context due to the runtime being pretty much shut down by this point.
Quoted 3 lines
(I also wondered why this isn't a do-while loop but patch 6 addresses that.)
Right, that changes due to the lazy sb counter logic..
Brian
Quoted 32 lines
--D
Quoted 29 lines
fs/xfs/xfs_log.c +10
-0+while (xfs_log_need_covered (mp)) { + error =xfs_sync_sb (mp, true); +if (error) +break ; +xfs_ail_push_all_sync (mp->m_ail); + } + +return error; +} +/* * We may be holding the log iclog lock upon entering this routine. */ fs/xfs/xfs_log.h +1
-1@@ -138,7 +138,7 @@ void xlog_cil_process_committed(struct list_head *list);bool xfs_log_item_in_current_chkpt (struct xfs_log_item *lip);void xfs_log_work_queue (struct xfs_mount *mp); -void xfs_log_quiesce (struct xfs_mount *mp); +int xfs_log_quiesce (struct xfs_mount *mp);void xfs_log_clean (struct xfs_mount *mp);bool xfs_log_check_lsn (struct xfs_mount *,xfs_lsn_t );bool xfs_log_in_recovery (struct xfs_mount *);Signature · 1 line
2.26.2
Re: [PATCH 4/9] xfs: cover the log during log quiesce
Quoted 144 lines · Brian Foster
Quoted 128 lines · Darrick J. Wong
Quoted 104 lines · Brian Foster
The log quiesce mechanism historically terminates by marking the log clean with an unmount record. The primary objective is to indicate that log recovery is no longer required after the quiesce has flushed all in-core changes and written back filesystem metadata. While this is perfectly fine, it is somewhat hacky as currently used in certain contexts. For example, filesystem freeze quiesces (i.e. cleans) the log and immediately redirties it with a dummy superblock transaction to ensure that log recovery runs in the event of a crash.
While this functions correctly, cleaning the log from freeze context is clearly superfluous given the current redirtying behavior. Instead, the desired behavior can be achieved by simply covering the log. This effectively retires all on-disk log items from the active range of the log by issuing two synchronous and sequential dummy superblock update transactions that serve to update the on-disk log head and tail. The subtle difference is that the log technically remains dirty due to the lack of an unmount record, though recovery is effectively a no-op due to the content of the checkpoints being clean (i.e. the unmodified on-disk superblock).
Log covering currently runs in the background and only triggers once the filesystem and log has idled. The purpose of the background mechanism is to prevent log recovery from replaying the most recently logged items long after those items may have been written back. In the quiesce path, the log has been deliberately idled by forcing the log and pushing the AIL until empty in a context where no further mutable filesystem operations are allowed. Therefore, we can cover the log as the final step in the log quiesce codepath to reflect that all previously active items have been successfully written back.
This facilitates selective log covering from certain contexts (i.e. freeze) that only seek to quiesce, but not necessarily clean the log. Note that as a side effect of this change, log covering now occurs when cleaning the log as well. This is harmless, facilitates subsequent cleanups, and is mostly temporary as various operations switch to use explicit log covering.
Signed-off-by Brian Foster <[email protected]>--- fs/xfs/xfs_log.c | 49 +++++++++++++++++++++++++++++++++++++++++++++--- fs/xfs/xfs_log.h | 2 +- 2 files changed, 47 insertions(+), 4 deletions(-)fs/xfs/xfs_log.c +26
-3@@ -91,6 +91,9 @@ STATIC intxlog_iclogs_empty ( struct xlog *log); +static int +xfs_log_cover (struct xfs_mount *); + static void xlog_grant_sub_space( struct xlog *log,@@ -936,10 +939,9 @@ xfs_log_unmount_write(* To do this, we first need to shut down the background log work so it is not * trying to cover the log as we clean up. We then need to unpin all objects in * the log so we can then flush them out. Once they have completed their IO and -* run the callbacks removing themselves from the AIL, we can write the unmount -* record. +* run the callbacks removing themselves from the AIL, we can cover the log. */ -void +int xfs_log_quiesce (struct xfs_mount *mp) {@@ -957,6 +959,8 @@ xfs_log_quiesce(xfs_wait_buftarg (mp->m_ddev_targp);xfs_buf_lock (mp->m_sb_bp);xfs_buf_unlock (mp->m_sb_bp); + +return xfs_log_cover (mp); }void @@ -1092,6 +1096,45 @@ xfs_log_need_covered(return needed; } +/* +* Explicitly cover the log. This is similar to background log covering but +* intended for usage in quiesce codepaths. The caller is responsible to ensure +* the log is idle and suitable for covering. The CIL, iclog buffers and AIL +* must all be empty. +*/ +static int +xfs_log_cover ( +struct xfs_mount *mp) +{ +struct xlog *log = mp->m_log; +int error =0 ; + +ASSERT ((xlog_cil_empty (log) &&xlog_iclogs_empty (log) && + !xfs_ail_min_lsn (log->l_ailp)) || +XFS_FORCED_SHUTDOWN (mp)); + +if (!xfs_log_writable (mp)) +return 0 ;fs/xfs/xfs_log.c xfs_log_need_covered( · line 1127
Quoted 10 lines
fs/xfs/xfs_log.c +10
-0+ +/* +* To cover the log, commit the superblock twice (at most) in +* independent checkpoints. The first serves as a reference for the +* tail pointer. The sync transaction and AIL push empties the AIL and +* updates the in-core tail to the LSN of the first checkpoint. The +* second commit updates the on-disk tail with the in-core LSN, +* covering the log. Push the AIL one more time to leave it empty, as +* we found it. +*/ Hm. At first I looked at
_need_coveredand wondered how this could work properly if we are in state DONE or DONE2, because this not-quite predicate returns zero in that case.I think it's the case that the only way the log can end up in DONE state is if the background log worker had previously been in NEED, written the first of the dummy transactions, moved the state to DONE, and waited for
xlog_covered_stateto move the log from DONE to NEED2. Similarly, the log can only be in DONE2 state if the background worker wrote the second dummy and is now waiting forxlog_covered_stateto move the log from DONE2 to IDLE.Quoted 5 lines
Since
xfs_log_quiescecancelled the log worker and waited for it to finish before callingxfs_log_cover, the covering state here can only be IDLE, NEED, or NEED2, right? And hence the while loop pushes the log to IDLE no matter where it is now, right?Yeah, we're in a quiescent context at this point where no other transactions are running, the in-core structures should be drained and the background log worker cancelled, etc. With regard to the background log worker, I don't think it should ever actually see the DONE or DONE2 states as it sets those states and immediately issues the synchronous sb transaction. Therefore, the commit should have changed the state from DONE to NEED2 or NEED (if other items happened to land in the log) before it returns.
Quoted 6 lines
That said, I suppose it wouldn't be that surprising if some odd timing scenario or combination of external superblock commits could cause the background log worker to see a DONE state. I haven't fully audited for that, but regardless it would appropriately do nothing and that shouldn't be an issue from the quiesce context due to the runtime being pretty much shut down by this point.
<nod> I think that makes sense. :)
--D
Quoted 41 lines
Quoted 3 lines
(I also wondered why this isn't a do-while loop but patch 6 addresses that.)
Right, that changes due to the lazy sb counter logic..
Brian
Quoted 32 lines
--D
Quoted 29 lines
fs/xfs/xfs_log.c +10
-0+while (xfs_log_need_covered (mp)) { + error =xfs_sync_sb (mp, true); +if (error) +break ; +xfs_ail_push_all_sync (mp->m_ail); + } + +return error; +} +/* * We may be holding the log iclog lock upon entering this routine. */ fs/xfs/xfs_log.h +1
-1@@ -138,7 +138,7 @@ void xlog_cil_process_committed(struct list_head *list);bool xfs_log_item_in_current_chkpt (struct xfs_log_item *lip);void xfs_log_work_queue (struct xfs_mount *mp); -void xfs_log_quiesce (struct xfs_mount *mp); +int xfs_log_quiesce (struct xfs_mount *mp);void xfs_log_clean (struct xfs_mount *mp);bool xfs_log_check_lsn (struct xfs_mount *,xfs_lsn_t );bool xfs_log_in_recovery (struct xfs_mount *);Signature · 1 line
2.26.2
Re: [PATCH 4/9] xfs: cover the log during log quiesce
In reply to Brian FosterLooks good,
PATCH 5/9 xfs: don't reset log idle state on covering checkpoints
In reply to Brian FosterNow that log covering occurs on quiesce, we'd like to reuse the underlying superblock sync for final superblock updates. This includes things like lazy superblock counter updates, log feature incompat bits in the future, etc. One quirk to this approach is that once the log is in the IDLE (i.e. already covered) state, any subsequent log write resets the state back to NEED. This means that a final superblock sync to an already covered log requires two more sb syncs to return the log back to IDLE again.
For example, if a lazy superblock enabled filesystem is mount cycled without any modifications, the unmount path syncs the superblock once and writes an unmount record. With the desired log quiesce covering behavior, we sync the superblock three times at unmount
time: once for the lazy superblock counter update and twice more to cover the log. By contrast, if the log is active or only partially covered at unmount time, a final superblock sync would doubly serve as the one or two remaining syncs required to cover the log.
This duplicate covering sequence is unnecessary because the filesystem remains consistent if a crash occurs at any point. The superblock will either be recovered in the event of a crash or written back before the log is quiesced and potentially cleaned with an unmount record.
Update the log covering state machine to remain in the IDLE state if additional covering checkpoints pass through the log. This facilitates final superblock updates (such as lazy superblock counters) via a single sb sync without losing covered status. This provides some consistency with the active and partially covered cases and also avoids harmless, but spurious checkpoints when quiescing the log.
--- fs/xfs/xfs_log.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
fs/xfs/xfs_log.c +6 -3
@@ -2597,12 +2597,15 @@ xlog_covered_state( int iclogs_changed) {/* -* We usually go to NEED. But we go to NEED2 if the changed indicates we -* are done writing the dummy record. If we are done with the second -* dummy recored (DONE2), then we go to IDLE. +* We go to NEED for any non-covering writes. We go to NEED2 if we just +* wrote the first covering record (DONE). We go to IDLE if we just +* wrote the second covering record (DONE2) and remain in IDLE until a +* non-covering write occurs. */ switch (prev_state) {case XLOG_STATE_COVER_IDLE : +if (iclogs_changed ==1 ) +return XLOG_STATE_COVER_IDLE ;case XLOG_STATE_COVER_NEED :case XLOG_STATE_COVER_NEED2 :break ;
Signature · 1 line
2.26.2
Re: [PATCH 5/9] xfs: don't reset log idle state on covering checkpoints
Quoted 32 lines · Brian Foster
Now that log covering occurs on quiesce, we'd like to reuse the underlying superblock sync for final superblock updates. This includes things like lazy superblock counter updates, log feature incompat bits in the future, etc. One quirk to this approach is that once the log is in the IDLE (i.e. already covered) state, any subsequent log write resets the state back to NEED. This means that a final superblock sync to an already covered log requires two more sb syncs to return the log back to IDLE again.
For example, if a lazy superblock enabled filesystem is mount cycled without any modifications, the unmount path syncs the superblock once and writes an unmount record. With the desired log quiesce covering behavior, we sync the superblock three times at unmount
time: once for the lazy superblock counter update and twice more to cover the log. By contrast, if the log is active or only partially covered at unmount time, a final superblock sync would doubly serve as the one or two remaining syncs required to cover the log.This duplicate covering sequence is unnecessary because the filesystem remains consistent if a crash occurs at any point. The superblock will either be recovered in the event of a crash or written back before the log is quiesced and potentially cleaned with an unmount record.
Update the log covering state machine to remain in the IDLE state if additional covering checkpoints pass through the log. This facilitates final superblock updates (such as lazy superblock counters) via a single sb sync without losing covered status. This provides some consistency with the active and partially covered cases and also avoids harmless, but spurious checkpoints when quiescing the log.
Quoted 1 line
Signed-off-by Brian Foster <[email protected]>
I /think/ the premise of this is ok.
I found myself wondering if xlog_state_activate_iclog could mistake an iclog containing 5 log ops from a real update for an iclog containing just the dummy transaction, since a synchronous inode mtime update transaction can also produce an iclog with 5 ops. I /think/ that doesn't matter because xlog_covered_state only cares about the value of iclogs_changed if the log worker previously set the log state to DONE or DONE2, and iclogs_changed won't be 1 here if there were multiple dirty iclogs or if the sole dirty iclog contains more than just the dummy.
If I got that right,
--D
Quoted 30 lines
--- fs/xfs/xfs_log.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)fs/xfs/xfs_log.c +6
-3@@ -2597,12 +2597,15 @@ xlog_covered_state( int iclogs_changed) {/* -* We usually go to NEED. But we go to NEED2 if the changed indicates we -* are done writing the dummy record. If we are done with the second -* dummy recored (DONE2), then we go to IDLE. +* We go to NEED for any non-covering writes. We go to NEED2 if we just +* wrote the first covering record (DONE). We go to IDLE if we just +* wrote the second covering record (DONE2) and remain in IDLE until a +* non-covering write occurs. */ switch (prev_state) {case XLOG_STATE_COVER_IDLE : +if (iclogs_changed ==1 ) +return XLOG_STATE_COVER_IDLE ;case XLOG_STATE_COVER_NEED :case XLOG_STATE_COVER_NEED2 :break ;Signature · 1 line
2.26.2
Re: [PATCH 5/9] xfs: don't reset log idle state on covering checkpoints
Quoted 37 lines · Darrick J. Wong
Quoted 32 lines · Brian Foster
Now that log covering occurs on quiesce, we'd like to reuse the underlying superblock sync for final superblock updates. This includes things like lazy superblock counter updates, log feature incompat bits in the future, etc. One quirk to this approach is that once the log is in the IDLE (i.e. already covered) state, any subsequent log write resets the state back to NEED. This means that a final superblock sync to an already covered log requires two more sb syncs to return the log back to IDLE again.
For example, if a lazy superblock enabled filesystem is mount cycled without any modifications, the unmount path syncs the superblock once and writes an unmount record. With the desired log quiesce covering behavior, we sync the superblock three times at unmount
time: once for the lazy superblock counter update and twice more to cover the log. By contrast, if the log is active or only partially covered at unmount time, a final superblock sync would doubly serve as the one or two remaining syncs required to cover the log.This duplicate covering sequence is unnecessary because the filesystem remains consistent if a crash occurs at any point. The superblock will either be recovered in the event of a crash or written back before the log is quiesced and potentially cleaned with an unmount record.
Update the log covering state machine to remain in the IDLE state if additional covering checkpoints pass through the log. This facilitates final superblock updates (such as lazy superblock counters) via a single sb sync without losing covered status. This provides some consistency with the active and partially covered cases and also avoids harmless, but spurious checkpoints when quiescing the log.
Quoted 1 line
Signed-off-by Brian Foster <[email protected]>I /think/ the premise of this is ok.
Quoted 9 lines
I found myself wondering if
xlog_state_activate_iclogcould mistake an iclog containing 5 log ops from a real update for an iclog containing just the dummy transaction, since a synchronous inode mtime update transaction can also produce an iclog with 5 ops. I /think/ that doesn't matter becausexlog_covered_stateonly cares about the value oficlogs_changedif the log worker previously set the log state to DONE or DONE2, andiclogs_changedwon't be 1 here if there were multiple dirty iclogs or if the sole dirty iclog contains more than just the dummy.
That is my understanding. I had similar questions when first passing through the covering code and realizing the detection of the covering commit was sort of implicit in and of itself (hence the additional state checking and iclogs_changed logic). I think the bigger picture with regard to this series was that it doesn't really matter because nothing else is happening during quiesce, but I might revisit that from the background covering perspective now that I have a better handle on how the covering mechanism works...
Brian
Quoted 36 lines
If I got that right,
Reviewed-by Darrick J. Wong <[email protected]>--D
Quoted 30 lines
--- fs/xfs/xfs_log.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)fs/xfs/xfs_log.c +6
-3@@ -2597,12 +2597,15 @@ xlog_covered_state( int iclogs_changed) {/* -* We usually go to NEED. But we go to NEED2 if the changed indicates we -* are done writing the dummy record. If we are done with the second -* dummy recored (DONE2), then we go to IDLE. +* We go to NEED for any non-covering writes. We go to NEED2 if we just +* wrote the first covering record (DONE). We go to IDLE if we just +* wrote the second covering record (DONE2) and remain in IDLE until a +* non-covering write occurs. */ switch (prev_state) {case XLOG_STATE_COVER_IDLE : +if (iclogs_changed ==1 ) +return XLOG_STATE_COVER_IDLE ;case XLOG_STATE_COVER_NEED :case XLOG_STATE_COVER_NEED2 :break ;Signature · 1 line
2.26.2
PATCH 6/9 xfs: fold sbcount quiesce logging into log covering
In reply to Brian Fosterxfs_log_sbcount() calls xfs_sync_sb() to sync superblock counters to disk when lazy superblock accounting is enabled. This occurs on unmount, freeze, and read-only (re)mount and ensures the final values are calculated and persisted to disk before each form of quiesce completes.
Now that log covering occurs in all of these contexts and uses the same xfs_sync_sb() mechanism to update log state, there is no need to log the superblock separately for any reason. Update the log quiesce path to sync the superblock at least once for any mount where lazy superblock accounting is enabled. If the log is already covered, it will remain in the covered state. Otherwise, the next sync as part of the normal covering sequence will carry the associated superblock update with it. Remove xfs_log_sbcount() now that it is no longer needed.
--- fs/xfs/xfs_log.c | 20 ++++++++++++++++++-- fs/xfs/xfs_mount.c | 31 ------------------------------- fs/xfs/xfs_mount.h | 1 - fs/xfs/xfs_super.c | 8 -------- 4 files changed, 18 insertions(+), 42 deletions(-)
fs/xfs/xfs_log.c +18 -2
@@ -1108,6 +1108,7 @@ xfs_log_cover( {struct xlog *log = mp->m_log;int error =0 ; +bool need_covered; ASSERT((xlog_cil_empty(log) && xlog_iclogs_empty(log) && !xfs_ail_min_lsn(log->l_ailp)) ||
@@ -1116,6 +1117,21 @@ xfs_log_cover(if (!xfs_log_writable (mp))return 0 ; +/* +* xfs_log_need_covered() is not idempotent because it progresses the +* state machine if the log requires covering. Therefore, we must call +* this function once and use the result until we've issued an sb sync. +* Do so first to make that abundantly clear. +* +* Fall into the covering sequence if the log needs covering or the +* mount has lazy superblock accounting to sync to disk. The sb sync +* used for covering accumulates the in-core counters, so covering +* handles this for us. +*/ + need_covered =xfs_log_need_covered (mp); +if (!need_covered && !xfs_sb_version_haslazysbcount (&mp->m_sb)) +return 0 ; +/* * To cover the log, commit the superblock twice (at most) in * independent checkpoints. The first serves as a reference for the
@@ -1125,12 +1141,12 @@ xfs_log_cover(* covering the log. Push the AIL one more time to leave it empty, as * we found it. */ -while (xfs_log_need_covered (mp)) { +do { error =xfs_sync_sb (mp, true);if (error)break ;xfs_ail_push_all_sync (mp->m_ail); - } + }while (xfs_log_need_covered (mp));return error; }
fs/xfs/xfs_mount.c +0 -31
@@ -1124,12 +1124,6 @@ xfs_unmountfs(xfs_warn (mp,"Unable to free reserved block pool. " "Freespace may not be correct on next mount." ); - error =xfs_log_sbcount (mp); -if (error) -xfs_warn (mp,"Unable to update superblock counters. " -"Freespace may not be correct on next mount." ); - -xfs_log_unmount (mp);xfs_da_unmount (mp);xfs_uuid_unmount (mp);
@@ -1164,31 +1158,6 @@ xfs_fs_writable(return true; } -/* -* xfs_log_sbcount -* -* Sync the superblock counters to disk. -* -* Note this code can be called during the process of freezing, so we use the -* transaction allocator that does not block when the transaction subsystem is -* in its frozen state. -*/ -int -xfs_log_sbcount (xfs_mount_t *mp) -{ -if (!xfs_log_writable (mp)) -return 0 ; - -/* -* we don't need to do this if we are updating the superblock -* counters on every modification. -*/ -if (!xfs_sb_version_haslazysbcount (&mp->m_sb)) -return 0 ; - -return xfs_sync_sb (mp, true); -} -/* * Deltas for the block count can vary from 1 to very large, but lock contention * only occurs on frequent small block count updates such as in the delayed
fs/xfs/xfs_mount.h +0 -1
@@ -399,7 +399,6 @@ int xfs_buf_hash_init(xfs_perag_t *pag);void xfs_buf_hash_destroy (xfs_perag_t *pag);extern void xfs_uuid_table_free (void ); -extern int xfs_log_sbcount (xfs_mount_t *);extern uint64_t xfs_default_resblks (xfs_mount_t *mp);extern int xfs_mountfs (xfs_mount_t *mp); extern int xfs_initialize_perag(xfs_mount_t *mp, xfs_agnumber_t agcount,
fs/xfs/xfs_super.c +0 -8
@@ -884,19 +884,11 @@ voidxfs_quiesce_attr ( struct xfs_mount *mp) { -int error =0 ; -cancel_delayed_work_sync (&mp->m_log->l_work);/* force the log to unpin objects from the now complete transactions */ xfs_log_force (mp,XFS_LOG_SYNC ); - -/* Push the superblock and write an unmount record */ - error =xfs_log_sbcount (mp); -if (error) -xfs_warn (mp,"xfs_attr_quiesce: failed to log sb changes. " -"Frozen image may not be consistent." );xfs_log_clean (mp); }
Signature · 1 line
2.26.2
Re: [PATCH 6/9] xfs: fold sbcount quiesce logging into log covering
Quoted 16 lines · Brian Foster
xfs_log_sbcount()callsxfs_sync_sb()to sync superblock counters to disk when lazy superblock accounting is enabled. This occurs on unmount, freeze, and read-only (re)mount and ensures the final values are calculated and persisted to disk before each form of quiesce completes.Now that log covering occurs in all of these contexts and uses the same
xfs_sync_sb()mechanism to update log state, there is no need to log the superblock separately for any reason. Update the log quiesce path to sync the superblock at least once for any mount where lazy superblock accounting is enabled. If the log is already covered, it will remain in the covered state. Otherwise, the next sync as part of the normal covering sequence will carry the associated superblock update with it. Removexfs_log_sbcount()now that it is no longer needed.
Quoted 1 line
Signed-off-by Brian Foster <[email protected]>
If all my previous ramblings were correct,
--D
Quoted 144 lines
--- fs/xfs/xfs_log.c | 20 ++++++++++++++++++-- fs/xfs/xfs_mount.c | 31 ------------------------------- fs/xfs/xfs_mount.h | 1 - fs/xfs/xfs_super.c | 8 -------- 4 files changed, 18 insertions(+), 42 deletions(-)fs/xfs/xfs_log.c +18
-2@@ -1108,6 +1108,7 @@ xfs_log_cover( {struct xlog *log = mp->m_log;int error =0 ; +bool need_covered; ASSERT((xlog_cil_empty(log) && xlog_iclogs_empty(log) && !xfs_ail_min_lsn(log->l_ailp)) ||@@ -1116,6 +1117,21 @@ xfs_log_cover(if (!xfs_log_writable (mp))return 0 ; +/* +* xfs_log_need_covered() is not idempotent because it progresses the +* state machine if the log requires covering. Therefore, we must call +* this function once and use the result until we've issued an sb sync. +* Do so first to make that abundantly clear. +* +* Fall into the covering sequence if the log needs covering or the +* mount has lazy superblock accounting to sync to disk. The sb sync +* used for covering accumulates the in-core counters, so covering +* handles this for us. +*/ + need_covered =xfs_log_need_covered (mp); +if (!need_covered && !xfs_sb_version_haslazysbcount (&mp->m_sb)) +return 0 ; +/* * To cover the log, commit the superblock twice (at most) in * independent checkpoints. The first serves as a reference for the @@ -1125,12 +1141,12 @@ xfs_log_cover(* covering the log. Push the AIL one more time to leave it empty, as * we found it. */ -while (xfs_log_need_covered (mp)) { +do { error =xfs_sync_sb (mp, true);if (error)break ;xfs_ail_push_all_sync (mp->m_ail); - } + }while (xfs_log_need_covered (mp));return error; }fs/xfs/xfs_mount.c +0
-31@@ -1124,12 +1124,6 @@ xfs_unmountfs(xfs_warn (mp,"Unable to free reserved block pool. " "Freespace may not be correct on next mount." ); - error =xfs_log_sbcount (mp); -if (error) -xfs_warn (mp,"Unable to update superblock counters. " -"Freespace may not be correct on next mount." ); - -xfs_log_unmount (mp);xfs_da_unmount (mp);xfs_uuid_unmount (mp);@@ -1164,31 +1158,6 @@ xfs_fs_writable(return true; } -/* -* xfs_log_sbcount -* -* Sync the superblock counters to disk. -* -* Note this code can be called during the process of freezing, so we use the -* transaction allocator that does not block when the transaction subsystem is -* in its frozen state. -*/ -int -xfs_log_sbcount (xfs_mount_t *mp) -{ -if (!xfs_log_writable (mp)) -return 0 ; - -/* -* we don't need to do this if we are updating the superblock -* counters on every modification. -*/ -if (!xfs_sb_version_haslazysbcount (&mp->m_sb)) -return 0 ; - -return xfs_sync_sb (mp, true); -} -/* * Deltas for the block count can vary from 1 to very large, but lock contention * only occurs on frequent small block count updates such as in the delayed fs/xfs/xfs_mount.h +0
-1@@ -399,7 +399,6 @@ int xfs_buf_hash_init(xfs_perag_t *pag);void xfs_buf_hash_destroy (xfs_perag_t *pag);extern void xfs_uuid_table_free (void ); -extern int xfs_log_sbcount (xfs_mount_t *);extern uint64_t xfs_default_resblks (xfs_mount_t *mp);extern int xfs_mountfs (xfs_mount_t *mp); extern int xfs_initialize_perag(xfs_mount_t *mp, xfs_agnumber_t agcount,fs/xfs/xfs_super.c +0
-8@@ -884,19 +884,11 @@ voidxfs_quiesce_attr ( struct xfs_mount *mp) { -int error =0 ; -cancel_delayed_work_sync (&mp->m_log->l_work);/* force the log to unpin objects from the now complete transactions */ xfs_log_force (mp,XFS_LOG_SYNC ); - -/* Push the superblock and write an unmount record */ - error =xfs_log_sbcount (mp); -if (error) -xfs_warn (mp,"xfs_attr_quiesce: failed to log sb changes. " -"Frozen image may not be consistent." );xfs_log_clean (mp); }Signature · 1 line
2.26.2
PATCH 7/9 xfs: remove duplicate wq cancel and log force from attr quiesce
In reply to Brian FosterThese two calls are repeated at the beginning of xfs_log_quiesce(). Drop them from xfs_quiesce_attr().
--- fs/xfs/xfs_super.c | 5 ----- 1 file changed, 5 deletions(-)
fs/xfs/xfs_super.c +0 -5
@@ -884,11 +884,6 @@ voidxfs_quiesce_attr ( struct xfs_mount *mp) { -cancel_delayed_work_sync (&mp->m_log->l_work); - -/* force the log to unpin objects from the now complete transactions */ -xfs_log_force (mp,XFS_LOG_SYNC ); -xfs_log_clean (mp); }
Signature · 1 line
2.26.2
Re: [PATCH 7/9] xfs: remove duplicate wq cancel and log force from attr quiesce
Quoted 4 lines · Brian Foster
These two calls are repeated at the beginning of
xfs_log_quiesce(). Drop them fromxfs_quiesce_attr().Signed-off-by Brian Foster <[email protected]>
Makes sense,
--D
Quoted 23 lines
--- fs/xfs/xfs_super.c | 5 ----- 1 file changed, 5 deletions(-)fs/xfs/xfs_super.c +0
-5@@ -884,11 +884,6 @@ voidxfs_quiesce_attr ( struct xfs_mount *mp) { -cancel_delayed_work_sync (&mp->m_log->l_work); - -/* force the log to unpin objects from the now complete transactions */ -xfs_log_force (mp,XFS_LOG_SYNC ); -xfs_log_clean (mp); }Signature · 1 line
2.26.2
PATCH 8/9 xfs: remove xfs_quiesce_attr()
In reply to Brian Fosterxfs_quiesce_attr() is now a wrapper for xfs_log_clean(). Remove it and call xfs_log_clean() directly.
--- fs/xfs/xfs_mount.c | 2 +- fs/xfs/xfs_super.c | 24 ++---------------------- 2 files changed, 3 insertions(+), 23 deletions(-)
fs/xfs/xfs_mount.c +1 -1
@@ -946,7 +946,7 @@ xfs_mountfs(*/ if ((mp->m_flags & (XFS_MOUNT_RDONLY |XFS_MOUNT_NORECOVERY )) ==XFS_MOUNT_RDONLY ) { -xfs_quiesce_attr (mp); +xfs_log_clean (mp); }/*
fs/xfs/xfs_super.c +2 -22
@@ -867,26 +867,6 @@ xfs_restore_resvblks(struct xfs_mount *mp)xfs_reserve_blocks (mp, &resblks,NULL ); } -/* -* Trigger writeback of all the dirty metadata in the file system. -* -* This ensures that the metadata is written to their location on disk rather -* than just existing in transactions in the log. This means after a quiesce -* there is no log replay required to write the inodes to disk - this is the -* primary difference between a sync and a quiesce. -* -* We cancel log work early here to ensure all transactions the log worker may -* run have finished before we clean up and log the superblock and write an -* unmount record. The unfreeze process is responsible for restarting the log -* worker correctly. -*/ -void -xfs_quiesce_attr ( -struct xfs_mount *mp) -{ -xfs_log_clean (mp); -} -/* * Second stage of a freeze. The data is already frozen so we only * need to take care of the metadata. Once that's done sync the superblock
@@ -909,7 +889,7 @@ xfs_fs_freeze( flags =memalloc_nofs_save ();xfs_stop_block_reaping (mp);xfs_save_resvblks (mp); -xfs_quiesce_attr (mp); +xfs_log_clean (mp); ret =xfs_sync_sb (mp, true);memalloc_nofs_restore (flags);return ret;
@@ -1752,7 +1732,7 @@ xfs_remount_ro(*/ xfs_save_resvblks (mp); -xfs_quiesce_attr (mp); +xfs_log_clean (mp); mp->m_flags |=XFS_MOUNT_RDONLY ;return 0 ;
Signature · 1 line
2.26.2
Re: [PATCH 8/9] xfs: remove xfs_quiesce_attr()
Quoted 4 lines · Brian Foster
xfs_quiesce_attr()is now a wrapper forxfs_log_clean(). Remove it and callxfs_log_clean()directly.Signed-off-by Brian Foster <[email protected]>
Yay, I always found "quiesce attr" confusing...
--D
Quoted 70 lines
--- fs/xfs/xfs_mount.c | 2 +- fs/xfs/xfs_super.c | 24 ++---------------------- 2 files changed, 3 insertions(+), 23 deletions(-)fs/xfs/xfs_mount.c +1
-1@@ -946,7 +946,7 @@ xfs_mountfs(*/ if ((mp->m_flags & (XFS_MOUNT_RDONLY |XFS_MOUNT_NORECOVERY )) ==XFS_MOUNT_RDONLY ) { -xfs_quiesce_attr (mp); +xfs_log_clean (mp); }/* fs/xfs/xfs_super.c +2
-22@@ -867,26 +867,6 @@ xfs_restore_resvblks(struct xfs_mount *mp)xfs_reserve_blocks (mp, &resblks,NULL ); } -/* -* Trigger writeback of all the dirty metadata in the file system. -* -* This ensures that the metadata is written to their location on disk rather -* than just existing in transactions in the log. This means after a quiesce -* there is no log replay required to write the inodes to disk - this is the -* primary difference between a sync and a quiesce. -* -* We cancel log work early here to ensure all transactions the log worker may -* run have finished before we clean up and log the superblock and write an -* unmount record. The unfreeze process is responsible for restarting the log -* worker correctly. -*/ -void -xfs_quiesce_attr ( -struct xfs_mount *mp) -{ -xfs_log_clean (mp); -} -/* * Second stage of a freeze. The data is already frozen so we only * need to take care of the metadata. Once that's done sync the superblock @@ -909,7 +889,7 @@ xfs_fs_freeze( flags =memalloc_nofs_save ();xfs_stop_block_reaping (mp);xfs_save_resvblks (mp); -xfs_quiesce_attr (mp); +xfs_log_clean (mp); ret =xfs_sync_sb (mp, true);memalloc_nofs_restore (flags);return ret;@@ -1752,7 +1732,7 @@ xfs_remount_ro(*/ xfs_save_resvblks (mp); -xfs_quiesce_attr (mp); +xfs_log_clean (mp); mp->m_flags |=XFS_MOUNT_RDONLY ;return 0 ;Signature · 1 line
2.26.2
PATCH 9/9 xfs: cover the log on freeze instead of cleaning it
In reply to Brian FosterFilesystem freeze cleans the log and immediately redirties it so log recovery runs if a crash occurs after the filesystem is frozen. Now that log quiesce covers the log, there is no need to clean the log and redirty it to trigger log recovery because covering has the same effect. Update xfs_fs_freeze() to quiesce (and thus cover) the log.
--- fs/xfs/xfs_super.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
fs/xfs/xfs_super.c +1 -2
@@ -889,8 +889,7 @@ xfs_fs_freeze( flags =memalloc_nofs_save ();xfs_stop_block_reaping (mp);xfs_save_resvblks (mp); -xfs_log_clean (mp); - ret =xfs_sync_sb (mp, true); + ret =xfs_log_quiesce (mp);memalloc_nofs_restore (flags);return ret; }
Signature · 1 line
2.26.2
Re: [PATCH 9/9] xfs: cover the log on freeze instead of cleaning it
Quoted 7 lines · Brian Foster
Filesystem freeze cleans the log and immediately redirties it so log recovery runs if a crash occurs after the filesystem is frozen. Now that log quiesce covers the log, there is no need to clean the log and redirty it to trigger log recovery because covering has the same effect. Update
xfs_fs_freeze()to quiesce (and thus cover) the log.Signed-off-by Brian Foster <[email protected]>
Woot!
--D
Quoted 21 lines
--- fs/xfs/xfs_super.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)fs/xfs/xfs_super.c +1
-2@@ -889,8 +889,7 @@ xfs_fs_freeze( flags =memalloc_nofs_save ();xfs_stop_block_reaping (mp);xfs_save_resvblks (mp); -xfs_log_clean (mp); - ret =xfs_sync_sb (mp, true); + ret =xfs_log_quiesce (mp);memalloc_nofs_restore (flags);return ret; }Signature · 1 line
2.26.2