Skip to contentSkip to conversation

LEGO MINDSTORMS EV3 updates

PATCH New David Lechner 2 participants 6 messages Jan 11, 2021 – Jan 18, 2021

lore
Share & tools
lore
#0 lore raw

cover LEGO MINDSTORMS EV3 updates

This is a collection of a few updates/cleanups for LEGO MINDSTORMS EV3.

David Lechner (4):
ARM: legoev3: set serial# env var
ARM: legoev3: drop bi_arch_number
configs: legoev3: disable CONFIG_NET
configs: legoev3: disable non-Linux boot options

 board/lego/ev3/legoev3.c  | 89 +++++++++++++++++----------------------
 configs/legoev3_defconfig |  8 +++-
 include/configs/legoev3.h |  2 -
 3 files changed, 46 insertions(+), 53 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/4 ARM: legoev3: set serial# env var

This sets the serial# environmet variable instead of using ATAGs on LEGO MINDSTORMS EV3.

Also fix some nomenclature while we are touching this code (Bluetooth address is not the same as MAC address, EEPROM version is not the same as board version).

---
 board/lego/ev3/legoev3.c  | 85 ++++++++++++++++++---------------------
 configs/legoev3_defconfig |  1 +
 include/configs/legoev3.h |  2 -
 3 files changed, 40 insertions(+), 48 deletions(-)
board/lego/ev3/legoev3.c +39 -46
index 51b669a891..9ef3e12ce8 100644
@@ -13,6 +13,7 @@
  */
 
 #include <common.h>
+#include <env.h>
 #include <i2c.h>
 #include <init.h>
 #include <spi.h>
@@ -28,11 +29,9 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-u8 board_rev;
-
 #define EEPROM_I2C_ADDR		0x50
 #define EEPROM_REV_OFFSET	0x3F00
-#define EEPROM_MAC_OFFSET	0x3F06
+#define EEPROM_BDADDR_OFFSET	0x3F06
 
 const struct pinmux_resource pinmuxes[] = {
 	PINMUX_ITEM(spi0_pins_base),
@@ -52,59 +51,46 @@ const struct lpsc_resource lpsc[] = {
 
 const int lpsc_size = ARRAY_SIZE(lpsc);
 
-u32 get_board_rev(void)
-{
-	u8 buf[2];
-
-	if (!board_rev) {
-		if (i2c_read(EEPROM_I2C_ADDR, EEPROM_REV_OFFSET, 2, buf, 2)) {
-			printf("\nBoard revision read failed!\n");
-		} else {
-			/*
-			 * Board rev 3 has MAC address at EEPROM_REV_OFFSET.
-			 * Other revisions have checksum at EEPROM_REV_OFFSET+1
-			 * to detect this.
-			 */
-			if ((buf[0] ^ buf[1]) == 0xFF)
-				board_rev = buf[0];
-			else
-				board_rev = 3;
-		}
-	}
-
-	return board_rev;
-}
-
 /*
- * The Bluetooth MAC address serves as the board serial number.
+ * The Bluetooth address serves as the board serial number.
  */
-void get_board_serial(struct tag_serialnr *serialnr)
+static void setup_serial_number(void)
 {
 	u32 offset;
+	char serial_number[13];
 	u8 buf[6];
+	u8 eeprom_rev;
+
+	if (env_get("serial#"))
+		return;
+
+	if (i2c_read(EEPROM_I2C_ADDR, EEPROM_REV_OFFSET, 2, buf, 2)) {
+		printf("\nEEPROM revision read failed!\n");
+		return;
+	}
 
-	if (!board_rev)
-		board_rev = get_board_rev();
+	/*
+	 * EEPROM rev 3 has Bluetooth address at EEPROM_REV_OFFSET.
+	 * Other revisions have checksum at EEPROM_REV_OFFSET+1
+	 * to detect this.
+	 */
+	if ((buf[0] ^ buf[1]) == 0xFF)
+		eeprom_rev = buf[0];
+	else
+		eeprom_rev = 3;
 
-	/* Board rev 3 has MAC address where rev should be */
-	offset = (board_rev == 3) ? EEPROM_REV_OFFSET : EEPROM_MAC_OFFSET;
+	/* EEPROM rev 3 has Bluetooth address where rev should be */
+	offset = (eeprom_rev == 3) ? EEPROM_REV_OFFSET : EEPROM_BDADDR_OFFSET;
 
 	if (i2c_read(EEPROM_I2C_ADDR, offset, 2, buf, 6)) {
-		printf("\nBoard serial read failed!\n");
-	} else {
-		u8 *nr;
-
-		nr = (u8 *)&serialnr->low;
-		nr[0] = buf[5];
-		nr[1] = buf[4];
-		nr[2] = buf[3];
-		nr[3] = buf[2];
-		nr = (u8 *)&serialnr->high;
-		nr[0] = buf[1];
-		nr[1] = buf[0];
-		nr[2] = 0;
-		nr[3] = 0;
+		printf("\nEEPROM serial read failed!\n");
+		return;
 	}
+
+	sprintf(serial_number, "%02X%02X%02X%02X%02X%02X",
+		buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+
+	env_set("serial#", serial_number);
 }
 
 int board_early_init_f(void)
@@ -150,3 +136,10 @@ int board_init(void)
 
 	return 0;
 }
+
+int board_late_init(void)
+{
+	setup_serial_number();
+
+	return 0;
+}
configs/legoev3_defconfig +1 -0
index 7aff11ccca..fb0c4dc951 100644
@@ -12,6 +12,7 @@ CONFIG_AUTOBOOT_STOP_STR="l"
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_LATE_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
include/configs/legoev3.h +0 -2
index a5f7fab15e..ca96683a3a 100644
@@ -65,8 +65,6 @@
 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
 #define CONFIG_HWCONFIG		/* enable hwconfig */
 #define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SERIAL_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_SETUP_INITRD_TAG
 #define CONFIG_BOOTCOMMAND \
Signature · 1 line
2.25.1
#2 lore raw

PATCH 2/4 ARM: legoev3: drop bi_arch_number

In reply to David Lechner

This drops assigning bi_arch_number on LEGO MINDSTORMS EV3. This board never had its own unique number and since we are using device tree, we no longer need to pass an arch number to Linux.

---
 board/lego/ev3/legoev3.c | 4 ----
 1 file changed, 4 deletions(-)
board/lego/ev3/legoev3.c +0 -4
index 9ef3e12ce8..e30e2e82df 100644
@@ -116,10 +116,6 @@ int board_init(void)
 {
 	irq_init();
 
-	/* arch number of the board */
-	/* LEGO didn't register for a unique number and uses da850evm */
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM;
-
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
 
Signature · 1 line
2.25.1
#3 lore raw

PATCH 3/4 configs: legoev3: disable CONFIG_NET

In reply to David Lechner

This disables the CONFIG_NET setting for LEGO MINDSTORMS EV3. This board does not have any built-in networking, so it does not make sense to enable this feature.

This also fixes the warning:

===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info.
====================================================

---
 configs/legoev3_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
configs/legoev3_defconfig +2 -1
index fb0c4dc951..3dfbdf2b2e 100644
@@ -21,13 +21,13 @@ CONFIG_CMD_MX_CYCLIC=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SPI=y
 # CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y
 CONFIG_OF_CONTROL=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_VERSION_VARIABLE=y
+# CONFIG_NET is not set
 CONFIG_DM=y
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_SYS_I2C_DAVINCI=y
@@ -41,3 +41,4 @@ CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
+CONFIG_REGEX=y
Signature · 1 line
2.25.1
#4 lore raw

PATCH 4/4 configs: legoev3: disable non-Linux boot options

In reply to David Lechner

This disables booting to non-Linux OSes.

This board is uncomfortably close to its 256K size limit, so every few KB saved helps.

---
 configs/legoev3_defconfig | 4 ++++
 1 file changed, 4 insertions(+)
configs/legoev3_defconfig +4 -0
index 3dfbdf2b2e..34bc72fb8b 100644
@@ -14,6 +14,10 @@ CONFIG_AUTOBOOT_STOP_STR="l"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_HUSH_PARSER=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MX_CYCLIC=y
Signature · 1 line
2.25.1
#5 lore raw

cover LEGO MINDSTORMS EV3 updates

In reply to David Lechner
Quoted 1 line · David Lechner

This is a collection of a few updates/cleanups for LEGO MINDSTORMS EV3.

Applied to u-boot-ti/for-next branch.

Thanks and regards,
Lokesh

Quoted 12 lines

David Lechner (4):
ARM: legoev3: set serial# env var
ARM: legoev3: drop bi_arch_number
configs: legoev3: disable CONFIG_NET
configs: legoev3: disable non-Linux boot options

 board/lego/ev3/legoev3.c  | 89 +++++++++++++++++----------------------
 configs/legoev3_defconfig |  8 +++-
 include/configs/legoev3.h |  2 -
 3 files changed, 46 insertions(+), 53 deletions(-)