LEGO MINDSTORMS EV3 updates
cover LEGO MINDSTORMS EV3 updates
This is a collection of a few updates/cleanups for LEGO MINDSTORMS EV3.
David Lechner (4):
ARM: legoev3: set serial# env var
ARM: legoev3: drop bi_arch_number
configs: legoev3: disable CONFIG_NET
configs: legoev3: disable non-Linux boot options
board/lego/ev3/legoev3.c | 89 +++++++++++++++++---------------------- configs/legoev3_defconfig | 8 +++- include/configs/legoev3.h | 2 - 3 files changed, 46 insertions(+), 53 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/4 ARM: legoev3: set serial# env var
This sets the serial# environmet variable instead of using ATAGs on LEGO MINDSTORMS EV3.
Also fix some nomenclature while we are touching this code (Bluetooth address is not the same as MAC address, EEPROM version is not the same as board version).
--- board/lego/ev3/legoev3.c | 85 ++++++++++++++++++--------------------- configs/legoev3_defconfig | 1 + include/configs/legoev3.h | 2 - 3 files changed, 40 insertions(+), 48 deletions(-)
board/lego/ev3/legoev3.c +39 -46
@@ -13,6 +13,7 @@*/ #include <common.h> +#include <env.h> #include <i2c.h> #include <init.h> #include <spi.h>
@@ -28,11 +29,9 @@DECLARE_GLOBAL_DATA_PTR ; -u8 board_rev; -#define EEPROM_I2C_ADDR 0x50#define EEPROM_REV_OFFSET 0x3F00 -#define EEPROM_MAC_OFFSET 0x3F06 +#define EEPROM_BDADDR_OFFSET 0x3F06const struct pinmux_resource pinmuxes[] = {PINMUX_ITEM (spi0_pins_base),
@@ -52,59 +51,46 @@ const struct lpsc_resource lpsc[] = {const int lpsc_size =ARRAY_SIZE (lpsc); -u32 get_board_rev (void ) -{ -u8 buf[2 ]; - -if (!board_rev) { -if (i2c_read (EEPROM_I2C_ADDR ,EEPROM_REV_OFFSET ,2 , buf,2 )) { -printf ("\nBoard revision read failed!\n" ); - }else { -/* -* Board rev 3 has MAC address at EEPROM_REV_OFFSET. -* Other revisions have checksum at EEPROM_REV_OFFSET+1 -* to detect this. -*/ -if ((buf[0 ] ^ buf[1 ]) ==0xFF ) - board_rev = buf[0 ]; -else - board_rev =3 ; - } - } - -return board_rev; -} -/* -* The Bluetooth MAC address serves as the board serial number. +* The Bluetooth address serves as the board serial number. */ -void get_board_serial (struct tag_serialnr *serialnr) +static void setup_serial_number (void ) {u32 offset; +char serial_number[13 ];u8 buf[6 ]; +u8 eeprom_rev; + +if (env_get ("serial#" )) +return ; + +if (i2c_read (EEPROM_I2C_ADDR ,EEPROM_REV_OFFSET ,2 , buf,2 )) { +printf ("\nEEPROM revision read failed!\n" ); +return ; + } -if (!board_rev) - board_rev =get_board_rev (); +/* +* EEPROM rev 3 has Bluetooth address at EEPROM_REV_OFFSET. +* Other revisions have checksum at EEPROM_REV_OFFSET+1 +* to detect this. +*/ +if ((buf[0 ] ^ buf[1 ]) ==0xFF ) + eeprom_rev = buf[0 ]; +else + eeprom_rev =3 ; -/* Board rev 3 has MAC address where rev should be */ - offset = (board_rev ==3 ) ?EEPROM_REV_OFFSET :EEPROM_MAC_OFFSET ; +/* EEPROM rev 3 has Bluetooth address where rev should be */ + offset = (eeprom_rev ==3 ) ?EEPROM_REV_OFFSET :EEPROM_BDADDR_OFFSET ;if (i2c_read (EEPROM_I2C_ADDR , offset,2 , buf,6 )) { -printf ("\nBoard serial read failed!\n" ); - }else { -u8 *nr; - - nr = (u8 *)&serialnr->low; - nr[0 ] = buf[5 ]; - nr[1 ] = buf[4 ]; - nr[2 ] = buf[3 ]; - nr[3 ] = buf[2 ]; - nr = (u8 *)&serialnr->high; - nr[0 ] = buf[1 ]; - nr[1 ] = buf[0 ]; - nr[2 ] =0 ; - nr[3 ] =0 ; +printf ("\nEEPROM serial read failed!\n" ); +return ; } + +sprintf (serial_number,"%02X%02X%02X%02X%02X%02X" , + buf[0 ], buf[1 ], buf[2 ], buf[3 ], buf[4 ], buf[5 ]); + +env_set ("serial#" , serial_number); }int board_early_init_f (void )
@@ -150,3 +136,10 @@ int board_init(void)return 0 ; } + +int board_late_init (void ) +{ +setup_serial_number (); + +return 0 ; +}
configs/legoev3_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_AUTOBOOT_STOP_STR="l" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y
include/configs/legoev3.h +0 -2
@@ -65,8 +65,6 @@#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)#define CONFIG_HWCONFIG /* enable hwconfig */ #define CONFIG_CMDLINE_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_SERIAL_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_SETUP_INITRD_TAG #define CONFIG_BOOTCOMMAND \
Signature · 1 line
2.25.1
PATCH 2/4 ARM: legoev3: drop bi_arch_number
In reply to David LechnerThis drops assigning bi_arch_number on LEGO MINDSTORMS EV3. This board never had its own unique number and since we are using device tree, we no longer need to pass an arch number to Linux.
--- board/lego/ev3/legoev3.c | 4 ---- 1 file changed, 4 deletions(-)
board/lego/ev3/legoev3.c +0 -4
@@ -116,10 +116,6 @@ int board_init(void) {irq_init (); -/* arch number of the board */ -/* LEGO didn't register for a unique number and uses da850evm */ - gd->bd->bi_arch_number =MACH_TYPE_DAVINCI_DA850_EVM ; -/* address of boot parameters */ gd->bd->bi_boot_params =LINUX_BOOT_PARAM_ADDR ;
Signature · 1 line
2.25.1
PATCH 3/4 configs: legoev3: disable CONFIG_NET
In reply to David LechnerThis disables the CONFIG_NET setting for LEGO MINDSTORMS EV3. This board does not have any built-in networking, so it does not make sense to enable this feature.
This also fixes the warning:
===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info.
====================================================
--- configs/legoev3_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
configs/legoev3_defconfig +2 -1
@@ -21,13 +21,13 @@ CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_DIAG=y CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_VERSION_VARIABLE=y +# CONFIG_NET is not set CONFIG_DM=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SYS_I2C_DAVINCI=y
@@ -41,3 +41,4 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_DAVINCI_SPI=y +CONFIG_REGEX=y
Signature · 1 line
2.25.1
PATCH 4/4 configs: legoev3: disable non-Linux boot options
In reply to David LechnerThis disables booting to non-Linux OSes.
This board is uncomfortably close to its 256K size limit, so every few KB saved helps.
--- configs/legoev3_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
configs/legoev3_defconfig +4 -0
@@ -14,6 +14,10 @@ CONFIG_AUTOBOOT_STOP_STR="l" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MX_CYCLIC=y
Signature · 1 line
2.25.1
cover LEGO MINDSTORMS EV3 updates
In reply to David LechnerQuoted 1 line · David Lechner
This is a collection of a few updates/cleanups for LEGO MINDSTORMS EV3.
Applied to u-boot-ti/for-next branch.
Thanks and regards,
Lokesh
Quoted 12 lines
David Lechner (4):
ARM: legoev3: set serial# env var
ARM: legoev3: dropbi_arch_number
configs: legoev3: disableCONFIG_NET
configs: legoev3: disable non-Linux boot optionsboard/lego/ev3/legoev3.c | 89 +++++++++++++++++---------------------- configs/legoev3_defconfig | 8 +++- include/configs/legoev3.h | 2 - 3 files changed, 46 insertions(+), 53 deletions(-)