Skip to contentSkip to conversation

configs/kontron_smarc_sal28: enable u-boot

PATCH New Michael Walle 3 participants 3 messages Jan 13, 2021 – Jan 14, 2021

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 configs/kontron_smarc_sal28: enable u-boot

Enable building of the bootloader and integrate it into the resulting image.

---
changes since v1:
- added BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y, thanks Heiko

 board/kontron/smarc-sal28/genimage.cfg |  6 ++++++
 board/kontron/smarc-sal28/readme.txt   | 15 +++++++++++++++
 configs/kontron_smarc_sal28_defconfig  | 10 ++++++++++
 3 files changed, 31 insertions(+)
board/kontron/smarc-sal28/genimage.cfg +6 -0
index 9ef37de757..d75234d997 100644
@@ -3,6 +3,12 @@ image sdcard-emmc.img {
 		gpt = true
 	}
 
+	partition u-boot {
+		offset = 1M
+		in-partition-table = "no"
+		image = "u-boot.rom"
+	}
+
 	partition rootfs {
 		offset = 2M
 		image = rootfs.ext4
board/kontron/smarc-sal28/readme.txt +15 -0
index 2047f09b64..bdf2258b59 100644
@@ -71,3 +71,18 @@ You will see something like this at boot time:
 [    4.563565] GPT:Alternate GPT header not at the end of the disk.
 [    4.569596] GPT:266272 != 7864319
 [    4.572925] GPT: Use GNU Parted to correct GPT errors.
+
+Updating the bootloader
+=======================
+
+Buildroot will automatically build the u-boot bootloader. The resulting
+image is called u-boot.rom and you can find it in the images/ directory.
+
+To update the bootloader on the board you could either copy it to an
+USB thumb drive or you could put it on a TFTP server. The following
+example assumes you have the bootloader image copied to the root of
+a thumb drive:
+
+  # usb start
+  # load usb 0:1 $loadaddr u-boot.rom
+  # sf probe 0 && sf update $fileaddr 0x210000 $filesize
configs/kontron_smarc_sal28_defconfig +10 -0
index b88f1aef4f..a8412b9c38 100644
@@ -19,5 +19,15 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom"
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Signature · 1 line
2.20.1
#1 lore raw

PATCH v2 1/1 configs/kontron_smarc_sal28: enable u-boot

Hi Michael,

Am Mi., 13. Jan. 2021 um 20:09 Uhr schrieb Michael Walle <[email protected]>:

Quoted 5 lines

Enable building of the bootloader and integrate it into the resulting image.

Quoted 72 lines

---
changes since v1:
- added BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y, thanks Heiko

 board/kontron/smarc-sal28/genimage.cfg |  6 ++++++
 board/kontron/smarc-sal28/readme.txt   | 15 +++++++++++++++
 configs/kontron_smarc_sal28_defconfig  | 10 ++++++++++
 3 files changed, 31 insertions(+)
board/kontron/smarc-sal28/genimage.cfg +6 -0
index 9ef37de757..d75234d997 100644
@@ -3,6 +3,12 @@ image sdcard-emmc.img {
                gpt = true
        }
 
+       partition u-boot {
+               offset = 1M
+               in-partition-table = "no"
+               image = "u-boot.rom"
+       }
+
        partition rootfs {
                offset = 2M
                image = rootfs.ext4
board/kontron/smarc-sal28/readme.txt +15 -0
index 2047f09b64..bdf2258b59 100644
@@ -71,3 +71,18 @@ You will see something like this at boot time:
 [    4.563565] GPT:Alternate GPT header not at the end of the disk.
 [    4.569596] GPT:266272 != 7864319
 [    4.572925] GPT: Use GNU Parted to correct GPT errors.
+
+Updating the bootloader
+=======================
+
+Buildroot will automatically build the u-boot bootloader. The resulting
+image is called u-boot.rom and you can find it in the images/ directory.
+
+To update the bootloader on the board you could either copy it to an
+USB thumb drive or you could put it on a TFTP server. The following
+example assumes you have the bootloader image copied to the root of
+a thumb drive:
+
+  # usb start
+  # load usb 0:1 $loadaddr u-boot.rom
+  # sf probe 0 && sf update $fileaddr 0x210000 $filesize
configs/kontron_smarc_sal28_defconfig +10 -1
index b88f1aef4f..a8412b9c38 100644
@@ -19,5 +19,15 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom"
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
--

2.20.1

Signature · 1 line
Heiko
#2 lore raw

PATCH v2 1/1 configs/kontron_smarc_sal28: enable u-boot

In reply to Michael Walle

Michael, All,

On 2021-01-13 20:09 +0100, Michael Walle spake thusly:

Quoted 4 lines

Enable building of the bootloader and integrate it into the resulting image.

Both applied to master, thanks.

Regards,
Yann E. MORIN.

Quoted 76 lines

---
changes since v1:
- added BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y, thanks Heiko

 board/kontron/smarc-sal28/genimage.cfg |  6 ++++++
 board/kontron/smarc-sal28/readme.txt   | 15 +++++++++++++++
 configs/kontron_smarc_sal28_defconfig  | 10 ++++++++++
 3 files changed, 31 insertions(+)
board/kontron/smarc-sal28/genimage.cfg +6 -0
index 9ef37de757..d75234d997 100644
@@ -3,6 +3,12 @@ image sdcard-emmc.img {
 		gpt = true
 	}
 
+	partition u-boot {
+		offset = 1M
+		in-partition-table = "no"
+		image = "u-boot.rom"
+	}
+
 	partition rootfs {
 		offset = 2M
 		image = rootfs.ext4
board/kontron/smarc-sal28/readme.txt +15 -0
index 2047f09b64..bdf2258b59 100644
@@ -71,3 +71,18 @@ You will see something like this at boot time:
 [    4.563565] GPT:Alternate GPT header not at the end of the disk.
 [    4.569596] GPT:266272 != 7864319
 [    4.572925] GPT: Use GNU Parted to correct GPT errors.
+
+Updating the bootloader
+=======================
+
+Buildroot will automatically build the u-boot bootloader. The resulting
+image is called u-boot.rom and you can find it in the images/ directory.
+
+To update the bootloader on the board you could either copy it to an
+USB thumb drive or you could put it on a TFTP server. The following
+example assumes you have the bootloader image copied to the root of
+a thumb drive:
+
+  # usb start
+  # load usb 0:1 $loadaddr u-boot.rom
+  # sf probe 0 && sf update $fileaddr 0x210000 $filesize
configs/kontron_smarc_sal28_defconfig +10 -0
index b88f1aef4f..a8412b9c38 100644
@@ -19,5 +19,15 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom"
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Signature · 6 lines
2.20.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'