Remove one more platform_device_add_properties() call
Subsystems (5)
Heikki Krogerus
reviewerv3 cover Remove one more platform_device_add_properties() call
Hi,
I'm now clearing the dev_fwnode(dev)->secondary pointer in device_remove_software_node() as requested by Daniel and Andy. Thanks guys, it's much better now. I also took the liberty of including one more PCI ID patch where I add PCI ID for the Alder Lake-P variant. I hope that is OK.
Andy, I dropped your Tested-by tag because of the change I made to the first patch. If you have time to retest these, I would much appreciate.
v2 cover letter:
Hi Felipe, Rafael,
This is the second version of this series. There are no real changes, but I added the Tiger Lake ID patch to this series in hope that it will make your life a bit easier, assuming that Rafael will still pick these.
The original over letter:
I originally introduced these as part of my series where I was proposing PM ops for software nodes [1], but since that still needs work, I'm sending these two separately.
So basically I'm only modifying dwc3-pci.c so it registers a software node directly at this point. That will remove one more user of platform_device_add_properties().
[1] https://lore.kernel.org/lkml/[email protected]/
thanks,
Heikki Krogerus (4):
software node: Introduce device_add_software_node()
usb: dwc3: pci: Register a software node for the dwc3 platform device
usb: dwc3: pci: ID for Tiger Lake CPU
usb: dwc3: pci: add support for the Intel Alder Lake-P
drivers/base/swnode.c | 71 ++++++++++++++++++++++++++++++++----- drivers/usb/dwc3/dwc3-pci.c | 69 ++++++++++++++++++++++------------- include/linux/property.h | 3 ++ 3 files changed, 110 insertions(+), 33 deletions(-)
Signature · 1 line
2.29.2
Heikki Krogerus
reviewerPATCH v3 1/4 software node: Introduce device_add_software_node()
This helper will register a software node and then assign it to device at the same time. The function will also make sure that the device can't have more than one software node.
--- drivers/base/swnode.c | 71 +++++++++++++++++++++++++++++++++++----- include/linux/property.h | 3 ++ 2 files changed, 65 insertions(+), 9 deletions(-)
drivers/base/swnode.c +62 -9
@@ -48,6 +48,19 @@ EXPORT_SYMBOL_GPL(is_software_node); struct swnode, fwnode) : NULL; \ }) +static inline struct swnode *dev_to_swnode (struct device *dev) +{ +struct fwnode_handle *fwnode =dev_fwnode (dev); + +if (!fwnode) +return NULL ; + +if (!is_software_node (fwnode)) + fwnode = fwnode->secondary; + +return to_swnode (fwnode); +} +static struct swnode *software_node_to_swnode (const struct software_node *node) {
@@ -843,22 +856,62 @@ void fwnode_remove_software_node(struct fwnode_handle *fwnode) }EXPORT_SYMBOL_GPL (fwnode_remove_software_node); +/** +* device_add_software_node - Assign software node to a device +* @dev: The device the software node is meant for. +* @swnode: The software node. +* +* This function will register @swnode and make it the secondary firmware node +* pointer of @dev. If @dev has no primary node, then @swnode will become the primary +* node. +*/ +int device_add_software_node (struct device *dev,const struct software_node *swnode) +{ +int ret; + +/* Only one software node per device. */ +if (dev_to_swnode (dev)) +return -EBUSY ; + + ret =software_node_register (swnode); +if (ret) +return ret; + +set_secondary_fwnode (dev,software_node_fwnode (swnode)); + +return 0 ; +} +EXPORT_SYMBOL_GPL (device_add_software_node); + +/** +* device_remove_software_node - Remove device's software node +* @dev: The device with the software node. +* +* This function will unregister the software node of @dev. +*/ +void device_remove_software_node (struct device *dev) +{ +struct swnode *swnode; + + swnode =dev_to_swnode (dev); +if (!swnode) +return ; + +software_node_notify (dev,KOBJ_REMOVE ); +set_secondary_fwnode (dev,NULL ); +kobject_put (&swnode->kobj); +} +EXPORT_SYMBOL_GPL (device_remove_software_node); +int software_node_notify (struct device *dev,unsigned long action) { -struct fwnode_handle *fwnode =dev_fwnode (dev);struct swnode *swnode;int ret; -if (!fwnode) -return 0 ; - -if (!is_software_node (fwnode)) - fwnode = fwnode->secondary; -if (!is_software_node (fwnode)) + swnode =dev_to_swnode (dev); +if (!swnode)return 0 ; - swnode =to_swnode (fwnode); -switch (action) {case KOBJ_ADD : ret = sysfs_create_link(&dev->kobj, &swnode->kobj,
include/linux/property.h +3 -0
@@ -488,4 +488,7 @@ fwnode_create_software_node(const struct property_entry *properties, const struct fwnode_handle *parent);void fwnode_remove_software_node (struct fwnode_handle *fwnode); +int device_add_software_node (struct device *dev,const struct software_node *swnode); +void device_remove_software_node (struct device *dev); +#endif /* _LINUX_PROPERTY_H_ */
Signature · 1 line
2.29.2
Heikki Krogerus
reviewerPATCH v3 2/4 usb: dwc3: pci: Register a software node for the dwc3 platform device
In reply to Heikki KrogerusBy registering the software node directly instead of just the properties in it, the driver can take advantage of also the other features the software nodes have.
--- drivers/usb/dwc3/dwc3-pci.c | 61 ++++++++++++++++++++++--------------- 1 file changed, 37 insertions(+), 24 deletions(-)
drivers/usb/dwc3/dwc3-pci.c +37 -24
@@ -142,6 +142,18 @@ static const struct property_entry dwc3_pci_amd_properties[] = { {} }; +static const struct software_node dwc3_pci_intel_swnode = { + .properties = dwc3_pci_intel_properties, +}; + +static const struct software_node dwc3_pci_intel_mrfld_swnode = { + .properties = dwc3_pci_mrfld_properties, +}; + +static const struct software_node dwc3_pci_amd_swnode = { + .properties = dwc3_pci_amd_properties, +}; +static int dwc3_pci_quirks (struct dwc3_pci *dwc) {struct pci_dev *pdev = dwc->pci;
@@ -222,7 +234,6 @@ static void dwc3_pci_resume_work(struct work_struct *work)static int dwc3_pci_probe (struct pci_dev *pci,const struct pci_device_id *id) { -struct property_entry *p = (struct property_entry *)id->driver_data;struct dwc3_pci *dwc;struct resource res[2 ];int ret;
@@ -265,7 +276,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) dwc->dwc3->dev.parent = dev;ACPI_COMPANION_SET (&dwc->dwc3->dev,ACPI_COMPANION (dev)); - ret =platform_device_add_properties (dwc->dwc3, p); + ret =device_add_software_node (&dwc->dwc3->dev, (void *)id->driver_data);if (ret <0 ) goto err;
@@ -288,6 +299,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)return 0 ; err: +device_remove_software_node (&dwc->dwc3->dev);platform_device_put (dwc->dwc3);return ret; }
@@ -304,75 +316,76 @@ static void dwc3_pci_remove(struct pci_dev *pci)#endif device_init_wakeup (&pci->dev, false);pm_runtime_get (&pci->dev); +device_remove_software_node (&dwc->dwc3->dev);platform_device_unregister (dwc->dwc3); }static const struct pci_device_id dwc3_pci_id_table[] = { {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_BSW ), - (kernel_ulong_t) &dwc3_pci_intel_properties }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_BYT ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_MRFLD ), - (kernel_ulong_t) &dwc3_pci_mrfld_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_mrfld_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_CMLLP ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_CMLH ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_SPTLP ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_SPTH ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_BXT ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_BXT_M ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_APL ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_KBP ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_GLK ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_CNPLP ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_CNPH ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_CNPV ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_ICLLP ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_EHLLP ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_TGPLP ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_TGPH ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_JSP ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_ADLS ), - (kernel_ulong_t) &dwc3_pci_intel_properties, }, + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, {PCI_VDEVICE (AMD ,PCI_DEVICE_ID_AMD_NL_USB ), - (kernel_ulong_t) &dwc3_pci_amd_properties, }, + (kernel_ulong_t) &dwc3_pci_amd_swnode, }, { }/* Terminating Entry */ };MODULE_DEVICE_TABLE (pci, dwc3_pci_id_table);
Signature · 1 line
2.29.2
Heikki Krogerus
reviewerPATCH v3 3/4 usb: dwc3: pci: ID for Tiger Lake CPU
In reply to Heikki KrogerusTiger Lake SOC (the versions of it that have integrated USB4 controller) may have two DWC3 controllers. One is part of the PCH (Platform Controller Hub, i.e. the chipset) as usual, and the other is inside the actual CPU block.
On all Intel platforms that have the two separate DWC3 controllers, the one inside the CPU handles USB3 and only USB3 traffic, while the PCH version handles USB2 and USB2 alone. The reason for splitting the two busses like this is to allow easy USB3 tunneling over USB4 connections. As USB2 is not tunneled over USB4, it has dedicated USB controllers (both xHCI and DWC3).
--- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/dwc3/dwc3-pci.c +4 -0
@@ -41,6 +41,7 @@#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee#define PCI_DEVICE_ID_INTEL_JSP 0x4dee#define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1 +#define PCI_DEVICE_ID_INTEL_TGL 0x9a15#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
@@ -384,6 +385,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_ADLS ), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL), + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_swnode, }, { } /* Terminating Entry */
Signature · 1 line
2.29.2
Heikki Krogerus
reviewerPATCH v3 4/4 usb: dwc3: pci: add support for the Intel Alder Lake-P
In reply to Heikki KrogerusThis patch adds the necessary PCI ID for Intel Alder Lake-P devices.
--- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/dwc3/dwc3-pci.c +4 -0
@@ -40,6 +40,7 @@#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee#define PCI_DEVICE_ID_INTEL_JSP 0x4dee +#define PCI_DEVICE_ID_INTEL_ADLP 0x51ee#define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1#define PCI_DEVICE_ID_INTEL_TGL 0x9a15
@@ -382,6 +383,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_JSP ), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLP), + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS), (kernel_ulong_t) &dwc3_pci_intel_swnode, },
Signature · 1 line
2.29.2
Re: [PATCH v3 4/4] usb: dwc3: pci: add support for the Intel Alder Lake-P
Quoted 4 lines · Heikki Krogerus
This patch adds the necessary PCI ID for Intel Alder Lake-P devices.
Signed-off-by Heikki Krogerus <[email protected]>
The only missing my ack:
Signature · 1 line
balbi
Quoted 11 lines · Heikki Krogerus
Hi,
I'm now clearing the dev_fwnode(dev)->secondary pointer in
device_remove_software_node()as requested by Daniel and Andy. Thanks guys, it's much better now. I also took the liberty of including one more PCI ID patch where I add PCI ID for the Alder Lake-P variant. I hope that is OK.Andy, I dropped your Tested-by tag because of the change I made to the first patch. If you have time to retest these, I would much appreciate.
Since Greg already grabbed a v3 I will test it when it appears in linux-next.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Daniel Scally
reviewerQuoted 10 lines · Andy Shevchenko
Quoted 8 lines · Heikki Krogerus
Hi,
I'm now clearing the dev_fwnode(dev)->secondary pointer in
device_remove_software_node()as requested by Daniel and Andy. Thanks guys, it's much better now. I also took the liberty of including one more PCI ID patch where I add PCI ID for the Alder Lake-P variant. I hope that is OK.
Quoted 4 lines
Quoted 2 lines
Andy, I dropped your Tested-by tag because of the change I made to the first patch. If you have time to retest these, I would much appreciate.
Since Greg already grabbed a v3 I will test it when it appears in linux-next.
It seems the grabbed one is the v2 one though actually
Quoted 11 lines · Daniel Scally
Quoted 10 lines · Andy Shevchenko
Quoted 8 lines · Heikki Krogerus
Hi,
I'm now clearing the dev_fwnode(dev)->secondary pointer in
device_remove_software_node()as requested by Daniel and Andy. Thanks guys, it's much better now. I also took the liberty of including one more PCI ID patch where I add PCI ID for the Alder Lake-P variant. I hope that is OK.
Quoted 5 lines
Quoted 4 lines
Quoted 2 lines
Andy, I dropped your Tested-by tag because of the change I made to the first patch. If you have time to retest these, I would much appreciate.
Since Greg already grabbed a v3 I will test it when it appears in linux-next.
It seems the grabbed one is the v2 one though actually
In his last message he wrote that he noticed the v3 *as I understand that*. Greg, is it right? I mean you took v3 eventually?
Signature · 2 lines
With Best Regards, Andy Shevchenko
Daniel Scally
reviewerQuoted 12 lines · Andy Shevchenko
Quoted 11 lines · Daniel Scally
Quoted 10 lines · Andy Shevchenko
Quoted 8 lines · Heikki Krogerus
Hi,
I'm now clearing the dev_fwnode(dev)->secondary pointer in
device_remove_software_node()as requested by Daniel and Andy. Thanks guys, it's much better now. I also took the liberty of including one more PCI ID patch where I add PCI ID for the Alder Lake-P variant. I hope that is OK.
Quoted 8 lines
Quoted 5 lines
Quoted 4 lines
Quoted 2 lines
Andy, I dropped your Tested-by tag because of the change I made to the first patch. If you have time to retest these, I would much appreciate.
Since Greg already grabbed a v3 I will test it when it appears in linux-next.
It seems the grabbed one is the v2 one though actually
In his last message he wrote that he noticed the v3 *as I understand that*. Greg, is it right? I mean you took v3 eventually?
You're right:
My bad; I went off the automated message but didn't check the tree.