arm64: dts: lx2160a-cex7: delete RTC interrupt
Subsystems (2)
PATCH 1/1 arm64: dts: lx2160a-cex7: delete RTC interrupt
The RTC interrupt is incorrect and prevents the RTC driver initialising. In any case, the PCF2127 driver wants an active low interrupt, which neither the GIC nor the GPIO blocks support. There is an ISPPT block in the LX2160A, but this is not supported in mainline kernels. So, just delete the interrupt.
Signed-off-by Russell King <[email protected]>
--- arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +0 -2
@@ -158,8 +158,6 @@ rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; - // IRQ10_B - interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; }; };
Signature · 1 line
2.20.1
Shawn Guo
AppliedQuoted 7 lines · Russell King
The RTC interrupt is incorrect and prevents the RTC driver initialising. In any case, the PCF2127 driver wants an active low interrupt, which neither the GIC nor the GPIO blocks support. There is an ISPPT block in the LX2160A, but this is not supported in mainline kernels. So, just delete the interrupt.
Signed-off-by Russell King <[email protected]>
Applied, thanks.