Skip to contentSkip to conversation

arm64: dts: lx2160a-cex7: delete RTC interrupt

PATCH Applied Russell King 2 participants 2 messages Jan 10, 2021 – Jan 18, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: lx2160a-cex7: delete RTC interrupt

The RTC interrupt is incorrect and prevents the RTC driver initialising. In any case, the PCF2127 driver wants an active low interrupt, which neither the GIC nor the GPIO blocks support. There is an ISPPT block in the LX2160A, but this is not supported in mainline kernels. So, just delete the interrupt.

---
 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 2 --
 1 file changed, 2 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +0 -2
index 221f8a780df5..a7a4bca82d86 100644
@@ -158,8 +158,6 @@
 	rtc@51 {
 		compatible = "nxp,pcf2129";
 		reg = <0x51>;
-		// IRQ10_B
-		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
 
Signature · 1 line
2.20.1
Applied
#1 lore raw
Quoted 7 lines · Russell King

The RTC interrupt is incorrect and prevents the RTC driver initialising. In any case, the PCF2127 driver wants an active low interrupt, which neither the GIC nor the GPIO blocks support. There is an ISPPT block in the LX2160A, but this is not supported in mainline kernels. So, just delete the interrupt.

Applied, thanks.