dt-bindings: media: imx258: add bindings for IMX258 sensor

index df62c69a48c0..ba7f29622974 100644
@@ -1291,11 +1291,18 @@ static const struct acpi_device_id imx258_acpi_ids[] = {
 MODULE_DEVICE_TABLE(acpi, imx258_acpi_ids);
 #endif
 
+static const struct of_device_id imx258_dt_ids[] = {
+	{ .compatible = "sony,imx258" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx258_dt_ids);
+
 static struct i2c_driver imx258_i2c_driver = {
 	.driver = {
 		.name = "imx258",
 		.pm = &imx258_pm_ops,
 		.acpi_match_table = ACPI_PTR(imx258_acpi_ids),
+		.of_match_table	= imx258_dt_ids,
 	},
 	.probe_new = imx258_probe,
 	.remove = imx258_remove,

index ba7f29622974..505981e02cff 100644
@@ -1018,8 +1018,7 @@ static int imx258_set_stream(struct v4l2_subdev *sd, int enable)
 
 static int __maybe_unused imx258_suspend(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
 	struct imx258 *imx258 = to_imx258(sd);
 
 	if (imx258->streaming)

@@ -1030,8 +1029,7 @@ static int __maybe_unused imx258_suspend(struct device *dev)
 
 static int __maybe_unused imx258_resume(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
 	struct imx258 *imx258 = to_imx258(sd);
 	int ret;
 

index 505981e02cff..61d74b794582 100644
@@ -2,6 +2,7 @@
 // Copyright (C) 2018 Intel Corporation
 
 #include <linux/acpi.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/module.h>

@@ -68,6 +69,9 @@
 #define REG_CONFIG_MIRROR_FLIP		0x03
 #define REG_CONFIG_FLIP_TEST_PATTERN	0x02
 
+/* Input clock frequency in Hz */
+#define IMX258_INPUT_CLOCK_FREQ		19200000
+
 struct imx258_reg {
 	u16 address;
 	u8 val;

@@ -610,6 +614,8 @@ struct imx258 {
 
 	/* Streaming on/off */
 	bool streaming;
+
+	struct clk *clk;
 };
 
 static inline struct imx258 *to_imx258(struct v4l2_subdev *_sd)

@@ -972,6 +978,29 @@ static int imx258_stop_streaming(struct imx258 *imx258)
 	return 0;
 }
 
+static int imx258_power_on(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct imx258 *imx258 = to_imx258(sd);
+	int ret;
+
+	ret = clk_prepare_enable(imx258->clk);
+	if (ret)
+		dev_err(dev, "failed to enable clock\n");
+
+	return ret;
+}
+
+static int imx258_power_off(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct imx258 *imx258 = to_imx258(sd);
+
+	clk_disable_unprepare(imx258->clk);
+
+	return 0;
+}
+
 static int imx258_set_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct imx258 *imx258 = to_imx258(sd);

@@ -1199,9 +1228,26 @@ static int imx258_probe(struct i2c_client *client)
 	int ret;
 	u32 val = 0;
 
-	device_property_read_u32(&client->dev, "clock-frequency", &val);
-	if (val != 19200000)
+	imx258 = devm_kzalloc(&client->dev, sizeof(*imx258), GFP_KERNEL);
+	if (!imx258)
+		return -ENOMEM;
+
+	imx258->clk = devm_clk_get_optional(&client->dev, NULL);
+	if (!imx258->clk) {
+		dev_dbg(&client->dev,
+			"no clock provided, using clock-frequency property\n");
+
+		device_property_read_u32(&client->dev, "clock-frequency", &val);
+		if (val != IMX258_INPUT_CLOCK_FREQ)
+			return -EINVAL;
+	} else if (IS_ERR(imx258->clk)) {
+		return dev_err_probe(&client->dev, PTR_ERR(imx258->clk),
+				     "error getting clock\n");
+	}
+	if (clk_get_rate(imx258->clk) != IMX258_INPUT_CLOCK_FREQ) {
+		dev_err(&client->dev, "input clock frequency not supported\n");
 		return -EINVAL;
+	}
 
 	/*
 	 * Check that the device is mounted upside down. The driver only

@@ -1211,24 +1257,25 @@ static int imx258_probe(struct i2c_client *client)
 	if (ret || val != 180)
 		return -EINVAL;
 
-	imx258 = devm_kzalloc(&client->dev, sizeof(*imx258), GFP_KERNEL);
-	if (!imx258)
-		return -ENOMEM;
-
 	/* Initialize subdev */
 	v4l2_i2c_subdev_init(&imx258->sd, client, &imx258_subdev_ops);
 
+	/* Will be powered off via pm_runtime_idle */
+	ret = imx258_power_on(&client->dev);
+	if (ret)
+		return ret;
+
 	/* Check module identity */
 	ret = imx258_identify_module(imx258);
 	if (ret)
-		return ret;
+		goto error_identify;
 
 	/* Set default mode to max resolution */
 	imx258->cur_mode = &supported_modes[0];
 
 	ret = imx258_init_controls(imx258);
 	if (ret)
-		return ret;
+		goto error_identify;
 
 	/* Initialize subdev */
 	imx258->sd.internal_ops = &imx258_internal_ops;

@@ -1258,6 +1305,9 @@ static int imx258_probe(struct i2c_client *client)
 error_handler_free:
 	imx258_free_controls(imx258);
 
+error_identify:
+	imx258_power_off(&client->dev);
+
 	return ret;
 }
 

@@ -1271,6 +1321,8 @@ static int imx258_remove(struct i2c_client *client)
 	imx258_free_controls(imx258);
 
 	pm_runtime_disable(&client->dev);
+	if (!pm_runtime_status_suspended(&client->dev))
+		imx258_power_off(&client->dev);
 	pm_runtime_set_suspended(&client->dev);
 
 	return 0;

@@ -1278,6 +1330,7 @@ static int imx258_remove(struct i2c_client *client)
 
 static const struct dev_pm_ops imx258_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(imx258_suspend, imx258_resume)
+	SET_RUNTIME_PM_OPS(imx258_power_off, imx258_power_on, NULL)
 };
 
 #ifdef CONFIG_ACPI