Add support for Boundary Nitrogen8M Mini SBC
Subsystems (2)
v6 cover Add support for Boundary Nitrogen8M Mini SBC
Hello,
This patch set aims is to add the support of the Nitrogen8M Mini SBC from Boundary Devices.
Thanks,
Update in v2:
- Rewrite the dts (Remove the unused wlan and audio);
- Remove useless definition;
- Take in account review.
Update in v3:
- Take in account review.
Update in v4:
- Reorder definition in pmic
Update in v5:
- Take in account review.
- Remove useless i2c groups
Update in v6:
- Rename dts file to follow the existing;
- Take in account reviews.
Adrien Grassein (3):
dt-bindings: arm: imx: add imx8mm nitrogen support
arm64: dts: imx: Add i.mx8mm nitrogen basic dts support
arm64: defconfig: Enable PF8x00 as builtin
.../devicetree/bindings/arm/fsl.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mm-nitrogen-r2.dts | 393 ++++++++++++++++++ arch/arm64/configs/defconfig | 1 + 4 files changed, 396 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v6 1/3 dt-bindings: arm: imx: add imx8mm nitrogen support
The Nitrogen8M Mini is an ARM based single board computer (SBC).
--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -678,6 +678,7 @@ properties: items: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit + - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedRe: [PATCH v6 1/3] dt-bindings: arm: imx: add imx8mm nitrogen support
Quoted 4 lines · Adrien Grassein
The Nitrogen8M Mini is an ARM based single board computer (SBC).
Signed-off-by Adrien Grassein <[email protected]>Reviewed-by Krzysztof Kozlowski <[email protected]>
Applied all 3, thanks.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v6 2/3 arm64: dts: imx: Add i.mx8mm nitrogen basic dts support
In reply to Adrien GrasseinTested with a basic Build Root configuration booting from sdcard.
--- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mm-nitrogen-r2.dts | 393 ++++++++++++++++++ 2 files changed, 394 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts new file +393 -0
393 lines not on this page · raw message
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v6 3/3 arm64: defconfig: Enable PF8x00 as builtin
In reply to Adrien GrasseinThis driver is mandatory for the nitrogen8m mini board when booting from the sdcard slot.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -609,6 +609,7 @@ CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MP8859=y CONFIG_REGULATOR_PCA9450=y +CONFIG_REGULATOR_PF8X00=y CONFIG_REGULATOR_PFUZE100=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_QCOM_RPMH=y
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v6 3/3] arm64: defconfig: Enable PF8x00 as builtin
Quoted 7 lines · Adrien Grassein
This driver is mandatory for the nitrogen8m mini board when booting from the sdcard slot.
Signed-off-by Adrien Grassein <[email protected]>--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
Best regards,
Krzysztof