fstests: add idmapped mounts tests

index f3bc0a4f..72bd40a0 100644
@@ -62,6 +62,7 @@
 /src/cloner
 /src/dbtest
 /src/deduperace
+/src/detached_mounts_propagation
 /src/devzero
 /src/dio-interleaved
 /src/dio-invalidate-cache

index 3d729a34..99019e6e 100644
@@ -29,7 +29,8 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
 	attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \
 	dio-invalidate-cache stat_test t_encrypted_d_revalidate \
 	attr_replace_test swapon mkswap t_attr_corruption t_open_tmpfiles \
-	fscrypt-crypt-util bulkstat_null_ocount splice-test chprojid_fail
+	fscrypt-crypt-util bulkstat_null_ocount splice-test chprojid_fail \
+	detached_mounts_propagation
 
 SUBDIRS = log-writes perf
 

43 lines not on this page · raw message

new file mode 100644
index 00000000..ce88f447
@@ -0,0 +1,2 @@
+QA output created by 631
+silence is golden

index 7c7531d1..151f8af2 100644
@@ -633,3 +633,4 @@
 628 auto quick rw clone
 629 auto quick rw copy_range
 630 auto quick rw dedupe clone
+631 auto quick mount

index 3229bb26..4cc9c807 100644
@@ -179,6 +179,7 @@
 /src/aio-dio-regress/aiocp
 /src/aio-dio-regress/aiodio_sparse2
 /src/idmapped-mounts/idmapped-mounts
+/src/idmapped-mounts/mount-idmapped
 /src/log-writes/replay-log
 /src/perf/*.pyc
 

index 1bba0e93..f77430e2 100644
@@ -342,6 +342,36 @@ _scratch_mount()
 	_try_scratch_mount $* || _fail "mount failed"
 }
 
+_scratch_mount_idmapped()
+{
+	local type="$1"
+	local id="$2"
+
+	if [ "$type" = "u" ]; then
+		# This means root will be able to create files as uid %id in
+		# the underlying filesystem by going through the idmapped mount.
+		$here/src/idmapped-mounts/mount-idmapped --map-mount u:0:$id:1 \
+							 --map-mount u:$id:0:1 \
+							 --map-mount g:0:0:1 \
+							 "$SCRATCH_MNT" "$SCRATCH_MNT" || _fail "mount-idmapped failed"
+	elif [ "$type" = "g" ]; then
+		# This means root will be able to create files as gid %id in
+		# the underlying filesystem by going through the idmapped mount.
+		$here/src/idmapped-mounts/mount-idmapped --map-mount g:0:$id:1 \
+							 --map-mount g:$id:0:1 \
+							 --map-mount u:0:0:1 \
+							 "$SCRATCH_MNT" "$SCRATCH_MNT" || _fail "mount-idmapped failed"
+	elif [ "$type" = "b" ]; then
+		# This means root will be able to create files as uid and gid
+		# %id in the underlying filesystem by going through the idmapped mount.
+		$here/src/idmapped-mounts/mount-idmapped --map-mount b:0:$id:1 \
+							 --map-mount b:$id:0:1 \
+							 "$SCRATCH_MNT" "$SCRATCH_MNT" || _fail "mount-idmapped failed"
+	else
+		_fail "usage: either \"u\" (uid), \"g\" (gid), or \"b\" (uid and gid) must be specified "
+	fi
+}
+
 _scratch_unmount()
 {
 	case "$FSTYP" in

@@ -357,6 +387,11 @@ _scratch_unmount()
 	esac
 }
 
+_scratch_umount_idmapped()
+{
+	$UMOUNT_PROG $SCRATCH_MNT
+}
+
 _scratch_remount()
 {
     local opts="$1"

index 6a934146..ad4ddc99 100644
@@ -3,9 +3,10 @@
 TOPDIR = ../..
 include $(TOPDIR)/include/builddefs
 
-TARGETS = idmapped-mounts
+TARGETS = idmapped-mounts mount-idmapped
+CFILES_IDMAPPED_MOUNTS = idmapped-mounts.c utils.c
+CFILES_MOUNT_IDMAPPED = mount-idmapped.c utils.c
 
-CFILES = idmapped-mounts.c utils.c
 HFILES = missing.h utils.h
 LLDLIBS += -pthread
 LDIRT = $(TARGETS)

@@ -24,9 +25,13 @@ depend: .dep
 
 include $(BUILDRULES)
 
-$(TARGETS): $(CFILES)
+idmapped-mounts: $(CFILES_IDMAPPED_MOUNTS)
 	@echo "    [CC]    $@"
-	$(Q)$(LTLINK) $(CFILES) -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS)
+	$(Q)$(LTLINK) $(CFILES_IDMAPPED_MOUNTS) -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS)
+
+mount-idmapped: $(CFILES_MOUNT_IDMAPPED)
+	@echo "    [CC]    $@"
+	$(Q)$(LTLINK) $(CFILES_MOUNT_IDMAPPED) -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS)
 
 install:
 	$(INSTALL) -m 755 -d $(PKG_LIB_DIR)/src/idmapped-mounts

index 1437d5f7..32a9a555 100644
@@ -329,5 +329,25 @@ _report_quota_inodes() {
 	repquota $1 | egrep "^($qa_user|root|nobody)" | awk '{print $1, $6, $7, $8}' | sort -r
 }
 
+# Determine which type of quota we're using
+_qsetup()
+{
+	opt=$1
+	enforce=0
+	if [ $opt = "u" -o $opt = "uno" ]; then
+		type=u
+		eval `_choose_uid`
+	elif [ $opt = "g" -o $opt = "gno" ]; then
+		type=g
+		eval `_choose_gid`
+	elif [ $opt = "p" -o $opt = "pno" ]; then
+		type=p
+		eval `_choose_prid`
+	fi
+	[ $opt = "u" -o $opt = "g" -o $opt = "p" ] && enforce=1
+
+	echo "Using type=$type id=$id" >> $seqres.full
+}
+
 # make sure this script returns success
 /bin/true

index 1df97537..e7c81d0a 100755
@@ -69,25 +69,6 @@ _filter_and_check_blks()
 	' | _filter_quota_report
 }
 
-_qsetup()
-{
-	opt=$1
-	enforce=0
-	if [ $opt = "u" -o $opt = "uno" ]; then
-		type=u
-		eval `_choose_uid`
-	elif [ $opt = "g" -o $opt = "gno" ]; then
-		type=g
-		eval `_choose_gid`
-	elif [ $opt = "p" -o $opt = "pno" ]; then
-		type=p
-		eval `_choose_prid`
-	fi
-	[ $opt = "u" -o $opt = "g" -o $opt = "p" ] && enforce=1
-
-	echo "Using type=$type id=$id" >> $seqres.full
-}
-
 _exercise()
 {
 	_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs

index b862e67e..26b7fcfd 100755
@@ -62,25 +62,6 @@ _filter_and_check_blks()
 	' | _filter_quota_report
 }
 
-_qsetup()
-{
-	opt=$1
-	enforce=0
-	if [ $opt = "u" -o $opt = "uno" ]; then
-		type=u
-		eval `_choose_uid`
-	elif [ $opt = "g" -o $opt = "gno" ]; then
-		type=g
-		eval `_choose_gid`
-	elif [ $opt = "p" -o $opt = "pno" ]; then
-		type=p
-		eval `_choose_prid`
-	fi
-	[ $opt = "u" -o $opt = "g" -o $opt = "p" ] && enforce=1
-
-	echo "Using type=$type id=$id" >> $seqres.full
-}
-
 _exercise()
 {
 

new file mode 100755
index 00000000..a5d92314
@@ -0,0 +1,377 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2021 Christian Brauner <[email protected]>
+# All Rights Reserved.
+#
+# FS QA Test No. 529
+#
+# Exercise basic xfs_quota functionality (user/group/project quota)
+# Use of "sync" mount option here is an attempt to get deterministic
+# allocator behaviour.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+wipe_mounts()
+{
+	umount "${SCRATCH_MNT}/idmapped" >/dev/null 2>&1
+	_scratch_unmount >/dev/null 2>&1
+}
+
+_cleanup()
+{
+	cd /
+	wipe_mounts
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs xfs
+_require_idmapped_mounts
+_require_test_program "idmapped-mounts/mount-idmapped"
+_require_scratch
+_require_xfs_quota
+_require_user fsgqa
+_require_user fsgqa2
+_require_group fsgqa
+_require_group fsgqa2
+
+_scratch_mkfs_xfs >>$seqres.full 2>&1
+
+uqid=`id -u fsgqa`
+gqid=`id -g fsgqa`
+
+uqid2=`id -u fsgqa2`
+gqid2=`id -g fsgqa2`
+
+pqid=10
+cat >$tmp.projects <<EOF
+$pqid:$SCRATCH_MNT
+EOF
+
+cat >$tmp.projid <<EOF
+root:0
+fsgqa:$pqid
+EOF
+
+create_files_unmapped()
+{
+	local bs=$1
+	local inum=$2
+
+	echo "Using type=$type id=$id" >> $seqres.full
+
+	for ((i=0; i<$((inum-1)); i++)); do
+		_file_as_id $SCRATCH_MNT/unmapped/inode$i $id $type 1024 0
+	done
+
+	_file_as_id $SCRATCH_MNT/unmapped/block $id $type $bs 1
+}
+
+create_files_idmapped()
+{
+	local bs=$1
+	local inum=$2
+
+	echo "Using type=$type id=$id2" >> $seqres.full
+
+	for ((i=0; i<$((inum-1)); i++)); do
+		_file_as_id $SCRATCH_MNT/idmapped/inode$i $id2 $type 1024 0
+	done
+
+	_file_as_id $SCRATCH_MNT/idmapped/block $id2 $type $bs 1
+}
+
+clean_files()
+{
+	rm -rf $SCRATCH_MNT/unmapped 2>/dev/null
+	rm -rf $SCRATCH_MNT/idmapped 2>/dev/null
+	rm -rf $tmp.quot 2>/dev/null
+	rm -rf $tmp.quota 2>/dev/null
+}
+
+filter_quot()
+{
+	_filter_quota | grep -v "root \|\#0 " \
+		| sed -e '/#[0-9]*/s/#[0-9]*/#ID/g'
+}
+
+filter_report()
+{
+	_filter_quota | grep -v "^root \|^\#0 " \
+		| sed -e '/^#[0-9]*/s/^#[0-9]*/#ID/g'
+}
+
+filter_quota()
+{
+	_filter_quota | sed -e "/Disk quotas for/s/([0-9]*)/(ID)/g" \
+			    -e "/Disk quotas for/s/#[0-9]*/#ID/g"
+}
+
+filter_state()
+{
+	_filter_quota | sed -e "s/Inode: #[0-9]* (0 blocks, 0 extents)/Inode: #[INO] (0 blocks, 0 extents)/g" \
+			    -e "s/Inode: #[0-9]* ([0-9]* blocks, [0-9]* extents)/Inode: #[INO] (X blocks, Y extents)/g" \
+			    -e "/[0-9][0-9]:[0-9][0-9]:[0-9][0-9]/s/ [0-9][0-9]:[0-9][0-9]:[0-9][0-9]//g" \
+			    -e '/max warnings:/d'
+}
+
+test_quot()
+{
+	local opt="$*"
+
+	echo "checking quot command (type=$type)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "quot -$type $opt -bi" $SCRATCH_MNT | filter_quot
+}
+
+test_report()
+{
+	local opt="$*"
+
+	echo "checking report command (type=$type)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "report -$type $opt -bi" \
+			$SCRATCH_MNT | filter_report
+}
+
+test_quota()
+{
+	local opt="$*"
+
+	echo "checking quota command (type=$type)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "quota -$type $opt -bi $id" \
+			$SCRATCH_MNT | filter_quota
+}
+
+test_limit()
+{
+	local bs=$1
+	local bh=$2
+	local is=$3
+	local ih=$4
+
+	echo "checking limit command (type=$type, bsoft=$bs, bhard=$bh, isoft=$is, ihard=$ih)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "limit -$type bsoft=$bs bhard=$bh fsgqa" \
+			-c "limit -$type isoft=$is ihard=$ih fsgqa" \
+			$SCRATCH_MNT
+
+	# let the timer day transition happen
+	sleep 2
+}
+
+test_timer()
+{
+	echo "checking timer command (type=$type)"
+	# set 3days+1h for time won't become 2days soon
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "timer -$type -bi 73h" \
+			$SCRATCH_MNT | _filter_scratch
+}
+
+test_disable()
+{
+	echo "checking disable command (type=$type)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "disable -$type -v" \
+			$SCRATCH_MNT | filter_state
+}
+
+test_enable()
+{
+	echo "checking enable command (type=$type)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "enable -$type -v" $SCRATCH_MNT | filter_state
+}
+
+test_off()
+{
+	echo "checking off command (type=$type)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "off -$type -v" $SCRATCH_MNT | _filter_scratch
+}
+
+test_remove()
+{
+	echo "checking remove command (type=$type)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "remove -$type -v" \
+			$SCRATCH_MNT | _filter_scratch
+}
+
+test_state()
+{
+	echo "checking state command (type=$type)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "state -$type" $SCRATCH_MNT | filter_state
+}
+
+test_dump()
+{
+	echo "checking dump command (type=$type)"
+	rm -f $tmp.backup 2>>/dev/null
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "dump -$type -f $tmp.backup" \
+			$SCRATCH_MNT | _filter_scratch
+}
+
+test_restore()
+{
+	echo "checking restore command (type=$type)"
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+			-c "restore -$type -f $tmp.backup" \
+			$SCRATCH_MNT | _filter_scratch
+}
+
+wipe_scratch()
+{
+	wipe_mounts
+	_scratch_mkfs_xfs >>$seqres.full 2>&1
+}
+
+qmount_idmapped()
+{
+	wipe_mounts
+	_try_scratch_mount || _fail "qmount failed"
+
+	mkdir -p "${SCRATCH_MNT}/unmapped"
+	mkdir -p "${SCRATCH_MNT}/idmapped"
+
+	$here/src/idmapped-mounts/mount-idmapped \
+		--map-mount b:$id:$id2:1 \
+		--map-mount b:0:0:1 \
+		"$SCRATCH_MNT/unmapped" "$SCRATCH_MNT/idmapped" || _fail "mount-idmapped failed"
+
+	chmod ugo+rwx $SCRATCH_MNT
+	chmod ugo+rwx $SCRATCH_MNT/unmapped
+	chmod ugo+rwx $SCRATCH_MNT/idmapped
+}
+
+test_xfs_quota()
+{
+	# init quota
+	echo "init quota limit and timer, and dump it"
+	if [ "$idmapped" -eq 1 ]; then
+		echo "create_files_idmapped 1024k 15"; create_files_idmapped 1024k 15
+	else
+		echo "create_files_unmapped 1024k 15"; create_files_unmapped 1024k 15
+	fi
+	echo "quota remount"; qmount_idmapped
+	echo ; test_quot
+	echo ; test_timer
+	echo ; test_limit 512k 2048k 10 20
+	echo ; test_dump
+
+	# report options test
+	echo "report options test"
+	echo ; test_report
+	echo "-N option"; test_report -N
+	echo "-L -U options"; test_report -L $id -U $id
+	echo "-t option"; test_report -t
+	echo "-n option"; test_report -n
+	echo "-h option"; test_report -h
+
+	# quot options test
+	echo "quot options test"
+	echo ; test_quot
+	echo "-f option"; test_quot -f $tmp.quot
+	cat $tmp.quot | filter_quot
+	echo "-n option"; test_quot -n
+
+	# quota options test
+	echo ; test_quota
+	echo "-f option"; test_quota -f $tmp.quota
+	cat $tmp.quota | filter_quota
+	echo "-N option"; test_quota -N
+	echo "-n option"; test_quota -n
+	echo "-h option"; test_quota -h
+
+	# disable/enable test
+	echo "disable quota"
+	echo ; test_disable
+	echo ; test_report -N
+	echo "expect a remove error at here"; test_remove
+	echo ; test_enable
+	echo ; test_report -N
+
+	# off and remove test
+	echo "off and remove test"
+	echo ; test_limit 100m 100m 100 100
+	echo ; test_quota -N
+	echo ; test_off
+	echo ; test_state
+	echo ; test_remove
+	echo ; test_report -N
+	echo "quota remount"; qmount_idmapped
+	echo ; test_report -N
+
+	# restore test
+	echo "restore quota"
+	echo ; test_restore
+	echo ; test_report -N
+	echo ; test_state
+	echo "cleanup files"; clean_files
+}
+
+echo "----------------------- uquota,sync,unmapped ---------------------------"
+wipe_scratch
+_qmount_option "uquota,sync"
+type=u
+id=$uqid
+id2=$uqid2
+idmapped=0
+qmount_idmapped
+test_xfs_quota
+
+echo "----------------------- uquota,sync,idmapped ---------------------------"
+wipe_scratch
+_qmount_option "uquota,sync"
+type=u
+id=$uqid
+id2=$uqid2
+idmapped=1
+qmount_idmapped
+test_xfs_quota
+
+echo "----------------------- gquota,sync,unmapped ---------------------------"
+wipe_scratch
+_qmount_option "gquota,sync"
+type=g
+id=$gqid
+id2=$gqid2
+idmapped=0
+qmount_idmapped
+test_xfs_quota
+
+echo "----------------------- gquota,sync,idmapped ---------------------------"
+wipe_scratch
+_qmount_option "gquota,sync"
+type=g
+id=$gqid
+id2=$gqid2
+idmapped=1
+qmount_idmapped
+test_xfs_quota
+
+wipe_mounts
+
+# success, all done
+status=0
+exit

657 lines not on this page · raw message

index 288b916d..03b447c7 100644
@@ -505,3 +505,4 @@
 526 auto quick mkfs
 527 auto quick quota
 528 auto quick rw realtime
+529 auto quick quota idmapped

new file mode 100755
index 00000000..7d2e8771
@@ -0,0 +1,212 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2021 Christian Brauner <[email protected]>
+# All Rights Reserved.
+#
+# FS QA Test No. 530
+#
+# Exercises basic XFS quota functionality
+#       uquota, gquota, uqnoenforce, gqnoenforce
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+_cleanup()
+{
+	cd /
+	_scratch_unmount 2>/dev/null
+	rm -f $tmp.*
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# real QA test starts here
+_supported_fs xfs
+
+cp /dev/null $seqres.full
+chmod a+rwx $seqres.full	# arbitrary users will write here
+
+_require_scratch
+_require_xfs_quota
+_require_user fsgqa
+_require_test_program "idmapped-mounts/mount-idmapped"
+
+_scratch_mkfs >/dev/null 2>&1
+_scratch_mount
+bsize=$(_get_file_block_size $SCRATCH_MNT)
+_scratch_unmount
+
+bsoft=$(( 200 * $bsize ))
+bhard=$(( 1000 * $bsize ))
+isoft=4
+ihard=10
+
+# The actual point at which limit enforcement takes place for the
+# hard block limit is variable depending on filesystem blocksize,
+# and iosize.  What we want to test is that the limit is enforced
+# (ie. blksize less than limit but not unduly less - ~85% is kind)
+# nowadays we actually get much closer to the limit before EDQUOT.
+#
+_filter_and_check_blks()
+{
+	perl -npe '
+		if (/^\#'$id'\s+(\d+)/ && '$enforce') {
+			$maximum = '$bhard';
+			$minimum = '$bhard' * 85/100;
+			$used = $1 * 1024;
+			if (($used < $minimum || $used > $maximum) && '$noextsz') {
+				printf(" URK %d: %d is out of range! [%d,%d]\n",
+					'$id', $used, $minimum, $maximum);
+			}
+			s/^(\#'$id'\s+)(\d+)/\1 =OK=/g;
+		}
+	' | _filter_quota_report
+}
+
+run_tests()
+{
+	_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
+	cat $tmp.mkfs >>$seqres.full
+
+	# keep the blocksize and data size for dd later
+	. $tmp.mkfs
+
+	_qmount
+
+	# Figure out whether we're doing large allocations
+	# (bail out if they're so large they stuff the test up)
+	_test_inode_flag extsz-inherit $SCRATCH_MNT
+	noextsz=$?
+	extsize=`_test_inode_extsz $SCRATCH_MNT`
+	[ $extsize -ge 512000 ] && \
+		_notrun "Extent size hint is too large ($extsize bytes)"
+
+	_qsetup $1
+
+	echo "Using type=$type id=$id" >>$seqres.full
+
+	$XFS_QUOTA_PROG -x -c "warn -$type 65535 -d" $SCRATCH_DEV
+
+	echo
+	echo "*** report no quota settings" | tee -a $seqres.full
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+	echo
+	echo "*** report initial settings" | tee -a $seqres.full
+	_scratch_mount_idmapped $type $id
+	_file_as_id $SCRATCH_MNT/initme 0 $type 1024 0
+	_scratch_umount_idmapped
+	echo "ls -l $SCRATCH_MNT" >>$seqres.full
+	ls -l $SCRATCH_MNT >>$seqres.full
+	$XFS_QUOTA_PROG -D $tmp.projects -P $temp.projid -x \
+		-c "limit -$type bsoft=${bsoft} bhard=${bhard} $id" \
+		-c "limit -$type isoft=$isoft ihard=$ihard $id" \
+		$SCRATCH_DEV
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+	echo
+	echo "*** push past the soft inode limit" | tee -a $seqres.full
+	_scratch_mount_idmapped $type $id
+	_file_as_id $SCRATCH_MNT/softie1 0 $type 1024 0
+	_file_as_id $SCRATCH_MNT/softie2 0 $type 1024 0
+	_file_as_id $SCRATCH_MNT/softie3 0 $type 1024 0
+	_file_as_id $SCRATCH_MNT/softie4 0 $type 1024 0
+	_scratch_umount_idmapped
+	_qmount
+	$XFS_QUOTA_PROG -x -c "warn -i -$type 0 $id" $SCRATCH_DEV
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+	echo
+	echo "*** push past the soft block limit" | tee -a $seqres.full
+	_scratch_mount_idmapped $type $id
+	_file_as_id $SCRATCH_MNT/softie 0 $type $bsize 300
+	_scratch_umount_idmapped
+	_qmount
+	$XFS_QUOTA_PROG -x -c "warn -i -$type 0 $id" \
+		-c "warn -b -$type 0 $id" $SCRATCH_DEV
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+	echo
+	# Note: for quota accounting (not enforcement), EDQUOT is not expected
+	echo "*** push past the hard inode limit (expect EDQUOT)" | tee -a $seqres.full
+	for i in 1 2 3 4 5 6 7 8 9 10 11 12
+	do
+		_scratch_mount_idmapped $type $id
+		_file_as_id $SCRATCH_MNT/hard$i 0 $type 1024 0
+		_scratch_umount_idmapped
+	done
+	_qmount
+	$XFS_QUOTA_PROG -x  -c "warn -b -$type 0 $id" \
+		-c "warn -i -$type 0 $id" $SCRATCH_DEV
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+	echo
+	# Note: for quota accounting (not enforcement), EDQUOT is not expected
+	echo "*** push past the hard block limit (expect EDQUOT)" | tee -a $seqres.full
+	_scratch_mount_idmapped $type $id
+	_file_as_id $SCRATCH_MNT/softie 0 $type $bsize 1200
+	_scratch_umount_idmapped
+	echo "ls -l $SCRATCH_MNT" >>$seqres.full
+	ls -l $SCRATCH_MNT >>$seqres.full
+	_qmount
+	$XFS_QUOTA_PROG -x -c "warn -b -$type 0 $id" $SCRATCH_DEV
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_and_check_blks | LC_COLLATE=POSIX sort -ru
+
+	echo
+	echo "*** unmount"
+	_scratch_unmount
+
+}
+
+cat >$tmp.projects <<EOF
+1:$SCRATCH_MNT
+EOF
+
+cat >$tmp.projid <<EOF
+root:0
+scrach:1
+EOF
+
+projid_file="$tmp.projid"
+
+echo "*** user"
+_qmount_option "uquota"
+run_tests u
+
+echo "*** group"
+_qmount_option "gquota"
+run_tests g
+
+echo "*** uqnoenforce"
+_qmount_option "uqnoenforce"
+run_tests uno
+
+echo "*** gqnoenforce"
+_qmount_option "gqnoenforce"
+run_tests gno
+
+# success, all done
+status=0
+exit

129 lines not on this page · raw message

index 03b447c7..0b4d1b21 100644
@@ -506,3 +506,4 @@
 527 auto quick quota
 528 auto quick rw realtime
 529 auto quick quota idmapped
+530 auto quick quota idmapped