Skip to contentSkip to conversation

thermal: mediatek: add sensors-support

PATCH Superseded Frank Wunderlich 2 participants 2 messages Apr 20, 2021

Subsystems (2)
Arm MediaTek Thermal

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Frank Wunderlich

author
#0 lore raw

PATCH v2 1/1 thermal: mediatek: add sensors-support

From: Frank Wunderlich <[email protected]>

add HWMON-support to mediateks thermal driver to allow lm-sensors userspace tools read soc temperature

Signed-off-by Frank Wunderlich <[email protected]>

---
v2: drop ifdef and used devm_thermal_add_hwmon_sysfs

---
 drivers/thermal/mtk_thermal.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/thermal/mtk_thermal.c +7 -0
index 149c6d7fd5a0..32be8a715c7d 100644
@@ -23,6 +23,8 @@
 #include <linux/reset.h>
 #include <linux/types.h>
 
+#include "thermal_hwmon.h"
+
 /* AUXADC Registers */
 #define AUXADC_CON1_SET_V	0x008
 #define AUXADC_CON1_CLR_V	0x00c

@@ -1087,6 +1089,11 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_peri_therm;
 	}
 
+	tzdev->tzp->no_hwmon = false;
+	ret = devm_thermal_add_hwmon_sysfs(tzdev);
+	if (ret)
+		dev_err(&pdev->dev, "error in thermal_add_hwmon_sysfs");
+
 	return 0;
 
 err_disable_clk_peri_therm:
Signature · 7 lines
2.25.1


_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
#1 lore raw
Quoted 26 lines · Frank Wunderlich

From: Frank Wunderlich <[email protected]>

add HWMON-support to mediateks thermal driver to allow lm-sensors userspace tools read soc temperature

Signed-off-by Frank Wunderlich <[email protected]>

---
v2: drop ifdef and used devm_thermal_add_hwmon_sysfs

---
 drivers/thermal/mtk_thermal.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/thermal/mtk_thermal.c +2 -0
index 149c6d7fd5a0..32be8a715c7d 100644
@@ -23,6 +23,8 @@
 #include <linux/reset.h>
 #include <linux/types.h>
 
+#include "thermal_hwmon.h"
+
 /* AUXADC Registers */
 #define AUXADC_CON1_SET_V	0x008
 #define AUXADC_CON1_CLR_V	0x00c

drivers/thermal/mtk_thermal.c static int mtk_thermal_probe(struct platform_device *pdev) · line 1092

Quoted 4 lines
drivers/thermal/mtk_thermal.c +1 -0
@@ -1087,6 +1089,11 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_peri_therm;
 	}
 
+	tzdev->tzp->no_hwmon = false;

^^^^^^ you can drop this line

Quoted 8 lines
drivers/thermal/mtk_thermal.c +4 -0
+	ret = devm_thermal_add_hwmon_sysfs(tzdev);
+	if (ret)
+		dev_err(&pdev->dev, "error in thermal_add_hwmon_sysfs");
+
 	return 0;
 
 err_disable_clk_peri_therm:
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog