Skip to contentSkip to conversation

block/rbd: migrate to coroutines and add write zeroes support

PATCH Superseded Peter Lieven 2 participants 22 messages May 19, 2021 – Jun 27, 2021

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover block/rbd: migrate to coroutines and add write zeroes support

this series migrates the qemu rbd driver from the old aio emulation to native coroutines and adds write zeroes support which is important for block operations.

To achive this we first bump the librbd requirement to the already outdated luminous release of ceph to get rid of some wrappers and ifdef'ry in the code.

V2->V3:
- this patch is now rebased on top of current master
- Patch 1: only use cc.links and not cc.run to not break cross-compiling. [Kevin]
Since Qemu 6.1 its okay to rely on librbd >= 12.x since RHEL-7 support was dropped [Daniel]
- Patch 4: dropped
- Patch 5: store BDS in RBDTask and use bdrv_get_aio_context() [Kevin]

V1->V2:
- this patch is now rebased on top of current master with Paolos upcoming fixes for the meson.build script included:
- meson: accept either shared or static libraries if --disable-static
- meson: honor --enable-rbd if cc.links test fails
- Patch 1: adjusted to meson.build script
- Patch 2: unchanged
- Patch 3: new patch
- Patch 4: do not implement empty detach_aio_context callback [Jason]
- Patch 5: - fix aio completion cleanup in error case [Jason]
- return error codes from librbd
- Patch 6: - add support for thick provisioning [Jason]
- do not set write zeroes alignment
- Patch 7: new patch

Peter Lieven (6):
block/rbd: bump librbd requirement to luminous release block/rbd: store object_size in BDRVRBDState block/rbd: update s->image_size in qemu_rbd_getlength block/rbd: migrate from aio to coroutines block/rbd: add write zeroes support block/rbd: drop qemu_rbd_refresh_limits

 block/rbd.c | 408 ++++++++++++++++------------------------------------
 meson.build |   7 +-
 2 files changed, 128 insertions(+), 287 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v3 1/6 block/rbd: bump librbd requirement to luminous release

even luminous (version 12.2) is unmaintained for over 3 years now. Bump the requirement to get rid of the ifdef'ry in the code. Qemu 6.1 dropped the support for RHEL-7 which was the last supported OS that required an older librbd.

---
 block/rbd.c | 120 ++++------------------------------------------------
 meson.build |   7 ++-
 2 files changed, 13 insertions(+), 114 deletions(-)
block/rbd.c +8 -112
index 26f64cce7c..6b1cbe1d75 100644
@@ -55,24 +55,10 @@
  * leading "\".
  */
 
-/* rbd_aio_discard added in 0.1.2 */
-#if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 2)
-#define LIBRBD_SUPPORTS_DISCARD
-#else
-#undef LIBRBD_SUPPORTS_DISCARD
-#endif
-
 #define OBJ_MAX_SIZE (1UL << OBJ_DEFAULT_OBJ_ORDER)
 
 #define RBD_MAX_SNAPS 100
 
-/* The LIBRBD_SUPPORTS_IOVEC is defined in librbd.h */
-#ifdef LIBRBD_SUPPORTS_IOVEC
-#define LIBRBD_USE_IOVEC 1
-#else
-#define LIBRBD_USE_IOVEC 0
-#endif
-
 typedef enum {
     RBD_AIO_READ,
     RBD_AIO_WRITE,
@@ -84,7 +70,6 @@ typedef struct RBDAIOCB {
     BlockAIOCB common;
     int64_t ret;
     QEMUIOVector *qiov;
-    char *bounce;
     RBDAIOCmd cmd;
     int error;
     struct BDRVRBDState *s;
@@ -94,7 +79,6 @@ typedef struct RADOSCB {
     RBDAIOCB *acb;
     struct BDRVRBDState *s;
     int64_t size;
-    char *buf;
     int64_t ret;
 } RADOSCB;
 
@@ -342,13 +326,9 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs_json,
 
 static void qemu_rbd_memset(RADOSCB *rcb, int64_t offs)
 {
-    if (LIBRBD_USE_IOVEC) {
-        RBDAIOCB *acb = rcb->acb;
-        iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
-                   acb->qiov->size - offs);
-    } else {
-        memset(rcb->buf + offs, 0, rcb->size - offs);
-    }
+    RBDAIOCB *acb = rcb->acb;
+    iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
+               acb->qiov->size - offs);
 }
 
 /* FIXME Deprecate and remove keypairs or make it available in QMP. */
@@ -504,13 +484,6 @@ static void qemu_rbd_complete_aio(RADOSCB *rcb)
 
     g_free(rcb);
 
-    if (!LIBRBD_USE_IOVEC) {
-        if (acb->cmd == RBD_AIO_READ) {
-            qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
-        }
-        qemu_vfree(acb->bounce);
-    }
-
     acb->common.cb(acb->common.opaque, (acb->ret > 0 ? 0 : acb->ret));
 
     qemu_aio_unref(acb);
@@ -878,28 +851,6 @@ static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb)
                                      rbd_finish_bh, rcb);
 }
 
-static int rbd_aio_discard_wrapper(rbd_image_t image,
-                                   uint64_t off,
-                                   uint64_t len,
-                                   rbd_completion_t comp)
-{
-#ifdef LIBRBD_SUPPORTS_DISCARD
-    return rbd_aio_discard(image, off, len, comp);
-#else
-    return -ENOTSUP;
-#endif
-}
-
-static int rbd_aio_flush_wrapper(rbd_image_t image,
-                                 rbd_completion_t comp)
-{
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
-    return rbd_aio_flush(image, comp);
-#else
-    return -ENOTSUP;
-#endif
-}
-
 static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
                                  int64_t off,
                                  QEMUIOVector *qiov,
@@ -922,21 +873,6 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
 
     rcb = g_new(RADOSCB, 1);
 
-    if (!LIBRBD_USE_IOVEC) {
-        if (cmd == RBD_AIO_DISCARD || cmd == RBD_AIO_FLUSH) {
-            acb->bounce = NULL;
-        } else {
-            acb->bounce = qemu_try_blockalign(bs, qiov->size);
-            if (acb->bounce == NULL) {
-                goto failed;
-            }
-        }
-        if (cmd == RBD_AIO_WRITE) {
-            qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
-        }
-        rcb->buf = acb->bounce;
-    }
-
     acb->ret = 0;
     acb->error = 0;
     acb->s = s;
@@ -950,7 +886,7 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
     }
 
     switch (cmd) {
-    case RBD_AIO_WRITE: {
+    case RBD_AIO_WRITE:
         /*
          * RBD APIs don't allow us to write more than actual size, so in order
          * to support growing images, we resize the image before write
@@ -962,25 +898,16 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
                 goto failed_completion;
             }
         }
-#ifdef LIBRBD_SUPPORTS_IOVEC
-            r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
-#else
-            r = rbd_aio_write(s->image, off, size, rcb->buf, c);
-#endif
+        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
         break;
-    }
     case RBD_AIO_READ:
-#ifdef LIBRBD_SUPPORTS_IOVEC
-            r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
-#else
-            r = rbd_aio_read(s->image, off, size, rcb->buf, c);
-#endif
+        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
         break;
     case RBD_AIO_DISCARD:
-        r = rbd_aio_discard_wrapper(s->image, off, size, c);
+        r = rbd_aio_discard(s->image, off, size, c);
         break;
     case RBD_AIO_FLUSH:
-        r = rbd_aio_flush_wrapper(s->image, c);
+        r = rbd_aio_flush(s->image, c);
         break;
     default:
         r = -EINVAL;
@@ -995,9 +922,6 @@ failed_completion:
     rbd_aio_release(c);
 failed:
     g_free(rcb);
-    if (!LIBRBD_USE_IOVEC) {
-        qemu_vfree(acb->bounce);
-    }
 
     qemu_aio_unref(acb);
     return NULL;
@@ -1023,7 +947,6 @@ static BlockAIOCB *qemu_rbd_aio_pwritev(BlockDriverState *bs,
                          RBD_AIO_WRITE);
 }
 
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
 static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
                                       BlockCompletionFunc *cb,
                                       void *opaque)
@@ -1031,20 +954,6 @@ static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
     return rbd_start_aio(bs, 0, NULL, 0, cb, opaque, RBD_AIO_FLUSH);
 }
 
-#else
-
-static int qemu_rbd_co_flush(BlockDriverState *bs)
-{
-#if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 1)
-    /* rbd_flush added in 0.1.1 */
-    BDRVRBDState *s = bs->opaque;
-    return rbd_flush(s->image);
-#else
-    return 0;
-#endif
-}
-#endif
-
 static int qemu_rbd_getinfo(BlockDriverState *bs, BlockDriverInfo *bdi)
 {
     BDRVRBDState *s = bs->opaque;
@@ -1210,7 +1119,6 @@ static int qemu_rbd_snap_list(BlockDriverState *bs,
     return snap_count;
 }
 
-#ifdef LIBRBD_SUPPORTS_DISCARD
 static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs,
                                          int64_t offset,
                                          int bytes,
@@ -1220,9 +1128,7 @@ static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs,
     return rbd_start_aio(bs, offset, NULL, bytes, cb, opaque,
                          RBD_AIO_DISCARD);
 }
-#endif
 
-#ifdef LIBRBD_SUPPORTS_INVALIDATE
 static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs,
                                                       Error **errp)
 {
@@ -1232,7 +1138,6 @@ static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs,
         error_setg_errno(errp, -r, "Failed to invalidate the cache");
     }
 }
-#endif
 
 static QemuOptsList qemu_rbd_create_opts = {
     .name = "rbd-create-opts",
@@ -1290,23 +1195,14 @@ static BlockDriver bdrv_rbd = {
     .bdrv_aio_preadv        = qemu_rbd_aio_preadv,
     .bdrv_aio_pwritev       = qemu_rbd_aio_pwritev,
 
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
     .bdrv_aio_flush         = qemu_rbd_aio_flush,
-#else
-    .bdrv_co_flush_to_disk  = qemu_rbd_co_flush,
-#endif
-
-#ifdef LIBRBD_SUPPORTS_DISCARD
     .bdrv_aio_pdiscard      = qemu_rbd_aio_pdiscard,
-#endif
 
     .bdrv_snapshot_create   = qemu_rbd_snap_create,
     .bdrv_snapshot_delete   = qemu_rbd_snap_remove,
     .bdrv_snapshot_list     = qemu_rbd_snap_list,
     .bdrv_snapshot_goto     = qemu_rbd_snap_rollback,
-#ifdef LIBRBD_SUPPORTS_INVALIDATE
     .bdrv_co_invalidate_cache = qemu_rbd_co_invalidate_cache,
-#endif
 
     .strong_runtime_opts    = qemu_rbd_strong_runtime_opts,
 };
meson.build +5 -2
index 1559e8d873..644ef36476 100644
@@ -721,13 +721,16 @@ if not get_option('rbd').auto() or have_block
       int main(void) {
         rados_t cluster;
         rados_create(&cluster, NULL);
+        #if LIBRBD_VERSION_CODE < LIBRBD_VERSION(1, 12, 0)
+        #error
+        #endif
         return 0;
       }''', dependencies: [librbd, librados])
       rbd = declare_dependency(dependencies: [librbd, librados])
     elif get_option('rbd').enabled()
-      error('could not link librados')
+      error('librados/librbd >= 12.0.0 required')
     else
-      warning('could not link librados, disabling')
+      warning('librados/librbd >= 12.0.0 not found, disabling rbd support')
     endif
   endif
 endif
Signature · 1 line
2.17.1
#2 lore raw

Re: [PATCH V3 1/6] block/rbd: bump librbd requirement to luminous release

Quoted 272 lines · Peter Lieven

even luminous (version 12.2) is unmaintained for over 3 years now. Bump the requirement to get rid of the ifdef'ry in the code. Qemu 6.1 dropped the support for RHEL-7 which was the last supported OS that required an older librbd.

---
 block/rbd.c | 120 ++++------------------------------------------------
 meson.build |   7 ++-
 2 files changed, 13 insertions(+), 114 deletions(-)
block/rbd.c +8 -112
index 26f64cce7c..6b1cbe1d75 100644
@@ -55,24 +55,10 @@
  * leading "\".
  */
 
-/* rbd_aio_discard added in 0.1.2 */
-#if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 2)
-#define LIBRBD_SUPPORTS_DISCARD
-#else
-#undef LIBRBD_SUPPORTS_DISCARD
-#endif
-
 #define OBJ_MAX_SIZE (1UL << OBJ_DEFAULT_OBJ_ORDER)
 
 #define RBD_MAX_SNAPS 100
 
-/* The LIBRBD_SUPPORTS_IOVEC is defined in librbd.h */
-#ifdef LIBRBD_SUPPORTS_IOVEC
-#define LIBRBD_USE_IOVEC 1
-#else
-#define LIBRBD_USE_IOVEC 0
-#endif
-
 typedef enum {
     RBD_AIO_READ,
     RBD_AIO_WRITE,
@@ -84,7 +70,6 @@ typedef struct RBDAIOCB {
     BlockAIOCB common;
     int64_t ret;
     QEMUIOVector *qiov;
-    char *bounce;
     RBDAIOCmd cmd;
     int error;
     struct BDRVRBDState *s;
@@ -94,7 +79,6 @@ typedef struct RADOSCB {
     RBDAIOCB *acb;
     struct BDRVRBDState *s;
     int64_t size;
-    char *buf;
     int64_t ret;
 } RADOSCB;
 
@@ -342,13 +326,9 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs_json,
 
 static void qemu_rbd_memset(RADOSCB *rcb, int64_t offs)
 {
-    if (LIBRBD_USE_IOVEC) {
-        RBDAIOCB *acb = rcb->acb;
-        iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
-                   acb->qiov->size - offs);
-    } else {
-        memset(rcb->buf + offs, 0, rcb->size - offs);
-    }
+    RBDAIOCB *acb = rcb->acb;
+    iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
+               acb->qiov->size - offs);
 }
 
 /* FIXME Deprecate and remove keypairs or make it available in QMP. */
@@ -504,13 +484,6 @@ static void qemu_rbd_complete_aio(RADOSCB *rcb)
 
     g_free(rcb);
 
-    if (!LIBRBD_USE_IOVEC) {
-        if (acb->cmd == RBD_AIO_READ) {
-            qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
-        }
-        qemu_vfree(acb->bounce);
-    }
-
     acb->common.cb(acb->common.opaque, (acb->ret > 0 ? 0 : acb->ret));
 
     qemu_aio_unref(acb);
@@ -878,28 +851,6 @@ static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb)
                                      rbd_finish_bh, rcb);
 }
 
-static int rbd_aio_discard_wrapper(rbd_image_t image,
-                                   uint64_t off,
-                                   uint64_t len,
-                                   rbd_completion_t comp)
-{
-#ifdef LIBRBD_SUPPORTS_DISCARD
-    return rbd_aio_discard(image, off, len, comp);
-#else
-    return -ENOTSUP;
-#endif
-}
-
-static int rbd_aio_flush_wrapper(rbd_image_t image,
-                                 rbd_completion_t comp)
-{
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
-    return rbd_aio_flush(image, comp);
-#else
-    return -ENOTSUP;
-#endif
-}
-
 static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
                                  int64_t off,
                                  QEMUIOVector *qiov,
@@ -922,21 +873,6 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
 
     rcb = g_new(RADOSCB, 1);
 
-    if (!LIBRBD_USE_IOVEC) {
-        if (cmd == RBD_AIO_DISCARD || cmd == RBD_AIO_FLUSH) {
-            acb->bounce = NULL;
-        } else {
-            acb->bounce = qemu_try_blockalign(bs, qiov->size);
-            if (acb->bounce == NULL) {
-                goto failed;
-            }
-        }
-        if (cmd == RBD_AIO_WRITE) {
-            qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
-        }
-        rcb->buf = acb->bounce;
-    }
-
     acb->ret = 0;
     acb->error = 0;
     acb->s = s;
@@ -950,7 +886,7 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
     }
 
     switch (cmd) {
-    case RBD_AIO_WRITE: {
+    case RBD_AIO_WRITE:
         /*
          * RBD APIs don't allow us to write more than actual size, so in order
          * to support growing images, we resize the image before write
@@ -962,25 +898,16 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
                 goto failed_completion;
             }
         }
-#ifdef LIBRBD_SUPPORTS_IOVEC
-            r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
-#else
-            r = rbd_aio_write(s->image, off, size, rcb->buf, c);
-#endif
+        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
         break;
-    }
     case RBD_AIO_READ:
-#ifdef LIBRBD_SUPPORTS_IOVEC
-            r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
-#else
-            r = rbd_aio_read(s->image, off, size, rcb->buf, c);
-#endif
+        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
         break;
     case RBD_AIO_DISCARD:
-        r = rbd_aio_discard_wrapper(s->image, off, size, c);
+        r = rbd_aio_discard(s->image, off, size, c);
         break;
     case RBD_AIO_FLUSH:
-        r = rbd_aio_flush_wrapper(s->image, c);
+        r = rbd_aio_flush(s->image, c);
         break;
     default:
         r = -EINVAL;
@@ -995,9 +922,6 @@ failed_completion:
     rbd_aio_release(c);
 failed:
     g_free(rcb);
-    if (!LIBRBD_USE_IOVEC) {
-        qemu_vfree(acb->bounce);
-    }
 
     qemu_aio_unref(acb);
     return NULL;
@@ -1023,7 +947,6 @@ static BlockAIOCB *qemu_rbd_aio_pwritev(BlockDriverState *bs,
                          RBD_AIO_WRITE);
 }
 
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
 static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
                                       BlockCompletionFunc *cb,
                                       void *opaque)
@@ -1031,20 +954,6 @@ static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
     return rbd_start_aio(bs, 0, NULL, 0, cb, opaque, RBD_AIO_FLUSH);
 }
 
-#else
-
-static int qemu_rbd_co_flush(BlockDriverState *bs)
-{
-#if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 1)
-    /* rbd_flush added in 0.1.1 */
-    BDRVRBDState *s = bs->opaque;
-    return rbd_flush(s->image);
-#else
-    return 0;
-#endif
-}
-#endif
-
 static int qemu_rbd_getinfo(BlockDriverState *bs, BlockDriverInfo *bdi)
 {
     BDRVRBDState *s = bs->opaque;
@@ -1210,7 +1119,6 @@ static int qemu_rbd_snap_list(BlockDriverState *bs,
     return snap_count;
 }
 
-#ifdef LIBRBD_SUPPORTS_DISCARD
 static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs,
                                          int64_t offset,
                                          int bytes,
@@ -1220,9 +1128,7 @@ static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs,
     return rbd_start_aio(bs, offset, NULL, bytes, cb, opaque,
                          RBD_AIO_DISCARD);
 }
-#endif
 
-#ifdef LIBRBD_SUPPORTS_INVALIDATE
 static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs,
                                                       Error **errp)
 {
@@ -1232,7 +1138,6 @@ static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs,
         error_setg_errno(errp, -r, "Failed to invalidate the cache");
     }
 }
-#endif
 
 static QemuOptsList qemu_rbd_create_opts = {
     .name = "rbd-create-opts",
@@ -1290,23 +1195,14 @@ static BlockDriver bdrv_rbd = {
     .bdrv_aio_preadv        = qemu_rbd_aio_preadv,
     .bdrv_aio_pwritev       = qemu_rbd_aio_pwritev,
 
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
     .bdrv_aio_flush         = qemu_rbd_aio_flush,
-#else
-    .bdrv_co_flush_to_disk  = qemu_rbd_co_flush,
-#endif
-
-#ifdef LIBRBD_SUPPORTS_DISCARD
     .bdrv_aio_pdiscard      = qemu_rbd_aio_pdiscard,
-#endif
 
     .bdrv_snapshot_create   = qemu_rbd_snap_create,
     .bdrv_snapshot_delete   = qemu_rbd_snap_remove,
     .bdrv_snapshot_list     = qemu_rbd_snap_list,
     .bdrv_snapshot_goto     = qemu_rbd_snap_rollback,
-#ifdef LIBRBD_SUPPORTS_INVALIDATE
     .bdrv_co_invalidate_cache = qemu_rbd_co_invalidate_cache,
-#endif
 
     .strong_runtime_opts    = qemu_rbd_strong_runtime_opts,
 };
meson.build +0 -0
index 1559e8d873..644ef36476 100644

meson.build if not get_option('rbd').auto() or have_block · line 725

Quoted 5 lines
meson.build +2 -0
@@ -721,13 +721,16 @@ if not get_option('rbd').auto() or have_block
       int main(void) {
         rados_t cluster;
         rados_create(&cluster, NULL);
+        #if LIBRBD_VERSION_CODE < LIBRBD_VERSION(1, 12, 0)
+        #error

Hi Peter,

Just a nit, but I would stick to the actual version of the library instead of the package version. librbd major version is 1, librados major version is 2 -- it shows up in ldd, when listing /usr/lib, etc. Something like

    #error librbd >= 1.12.0 required

here

meson.build if not get_option('rbd').auto() or have_block · line 731

Quoted 7 lines
meson.build +2 -1
+        #endif
         return 0;
       }''', dependencies: [librbd, librados])
       rbd = declare_dependency(dependencies: [librbd, librados])
     elif get_option('rbd').enabled()
-      error('could not link librados')
+      error('librados/librbd >= 12.0.0 required')

and

error('could not link librados/librbd')

meson.build if not get_option('rbd').auto() or have_block · line 733

Quoted 3 lines
meson.build +1 -1
     else
-      warning('could not link librados, disabling')
+      warning('librados/librbd >= 12.0.0 not found, disabling rbd support')

warning('could not link librados/librbd, disabling')

here to avoid repeating the version.

Thanks,

Ilya

#3 lore raw

Re: [PATCH V3 1/6] block/rbd: bump librbd requirement to luminous release

Am 16.06.21 um 14:26 schrieb Ilya Dryomov:

Quoted 279 lines · Peter Lieven
Quoted 271 lines

even luminous (version 12.2) is unmaintained for over 3 years now. Bump the requirement to get rid of the ifdef'ry in the code. Qemu 6.1 dropped the support for RHEL-7 which was the last supported OS that required an older librbd.

---
 block/rbd.c | 120 ++++------------------------------------------------
 meson.build |   7 ++-
 2 files changed, 13 insertions(+), 114 deletions(-)
block/rbd.c +8 -112
index 26f64cce7c..6b1cbe1d75 100644
@@ -55,24 +55,10 @@
  * leading "\".
  */
 
-/* rbd_aio_discard added in 0.1.2 */
-#if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 2)
-#define LIBRBD_SUPPORTS_DISCARD
-#else
-#undef LIBRBD_SUPPORTS_DISCARD
-#endif
-
 #define OBJ_MAX_SIZE (1UL << OBJ_DEFAULT_OBJ_ORDER)
 
 #define RBD_MAX_SNAPS 100
 
-/* The LIBRBD_SUPPORTS_IOVEC is defined in librbd.h */
-#ifdef LIBRBD_SUPPORTS_IOVEC
-#define LIBRBD_USE_IOVEC 1
-#else
-#define LIBRBD_USE_IOVEC 0
-#endif
-
 typedef enum {
     RBD_AIO_READ,
     RBD_AIO_WRITE,
@@ -84,7 +70,6 @@ typedef struct RBDAIOCB {
     BlockAIOCB common;
     int64_t ret;
     QEMUIOVector *qiov;
-    char *bounce;
     RBDAIOCmd cmd;
     int error;
     struct BDRVRBDState *s;
@@ -94,7 +79,6 @@ typedef struct RADOSCB {
     RBDAIOCB *acb;
     struct BDRVRBDState *s;
     int64_t size;
-    char *buf;
     int64_t ret;
 } RADOSCB;
 
@@ -342,13 +326,9 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs_json,
 
 static void qemu_rbd_memset(RADOSCB *rcb, int64_t offs)
 {
-    if (LIBRBD_USE_IOVEC) {
-        RBDAIOCB *acb = rcb->acb;
-        iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
-                   acb->qiov->size - offs);
-    } else {
-        memset(rcb->buf + offs, 0, rcb->size - offs);
-    }
+    RBDAIOCB *acb = rcb->acb;
+    iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
+               acb->qiov->size - offs);
 }
 
 /* FIXME Deprecate and remove keypairs or make it available in QMP. */
@@ -504,13 +484,6 @@ static void qemu_rbd_complete_aio(RADOSCB *rcb)
 
     g_free(rcb);
 
-    if (!LIBRBD_USE_IOVEC) {
-        if (acb->cmd == RBD_AIO_READ) {
-            qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
-        }
-        qemu_vfree(acb->bounce);
-    }
-
     acb->common.cb(acb->common.opaque, (acb->ret > 0 ? 0 : acb->ret));
 
     qemu_aio_unref(acb);
@@ -878,28 +851,6 @@ static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb)
                                      rbd_finish_bh, rcb);
 }
 
-static int rbd_aio_discard_wrapper(rbd_image_t image,
-                                   uint64_t off,
-                                   uint64_t len,
-                                   rbd_completion_t comp)
-{
-#ifdef LIBRBD_SUPPORTS_DISCARD
-    return rbd_aio_discard(image, off, len, comp);
-#else
-    return -ENOTSUP;
-#endif
-}
-
-static int rbd_aio_flush_wrapper(rbd_image_t image,
-                                 rbd_completion_t comp)
-{
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
-    return rbd_aio_flush(image, comp);
-#else
-    return -ENOTSUP;
-#endif
-}
-
 static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
                                  int64_t off,
                                  QEMUIOVector *qiov,
@@ -922,21 +873,6 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
 
     rcb = g_new(RADOSCB, 1);
 
-    if (!LIBRBD_USE_IOVEC) {
-        if (cmd == RBD_AIO_DISCARD || cmd == RBD_AIO_FLUSH) {
-            acb->bounce = NULL;
-        } else {
-            acb->bounce = qemu_try_blockalign(bs, qiov->size);
-            if (acb->bounce == NULL) {
-                goto failed;
-            }
-        }
-        if (cmd == RBD_AIO_WRITE) {
-            qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
-        }
-        rcb->buf = acb->bounce;
-    }
-
     acb->ret = 0;
     acb->error = 0;
     acb->s = s;
@@ -950,7 +886,7 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
     }
 
     switch (cmd) {
-    case RBD_AIO_WRITE: {
+    case RBD_AIO_WRITE:
         /*
          * RBD APIs don't allow us to write more than actual size, so in order
          * to support growing images, we resize the image before write
@@ -962,25 +898,16 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
                 goto failed_completion;
             }
         }
-#ifdef LIBRBD_SUPPORTS_IOVEC
-            r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
-#else
-            r = rbd_aio_write(s->image, off, size, rcb->buf, c);
-#endif
+        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
         break;
-    }
     case RBD_AIO_READ:
-#ifdef LIBRBD_SUPPORTS_IOVEC
-            r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
-#else
-            r = rbd_aio_read(s->image, off, size, rcb->buf, c);
-#endif
+        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
         break;
     case RBD_AIO_DISCARD:
-        r = rbd_aio_discard_wrapper(s->image, off, size, c);
+        r = rbd_aio_discard(s->image, off, size, c);
         break;
     case RBD_AIO_FLUSH:
-        r = rbd_aio_flush_wrapper(s->image, c);
+        r = rbd_aio_flush(s->image, c);
         break;
     default:
         r = -EINVAL;
@@ -995,9 +922,6 @@ failed_completion:
     rbd_aio_release(c);
 failed:
     g_free(rcb);
-    if (!LIBRBD_USE_IOVEC) {
-        qemu_vfree(acb->bounce);
-    }
 
     qemu_aio_unref(acb);
     return NULL;
@@ -1023,7 +947,6 @@ static BlockAIOCB *qemu_rbd_aio_pwritev(BlockDriverState *bs,
                          RBD_AIO_WRITE);
 }
 
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
 static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
                                       BlockCompletionFunc *cb,
                                       void *opaque)
@@ -1031,20 +954,6 @@ static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
     return rbd_start_aio(bs, 0, NULL, 0, cb, opaque, RBD_AIO_FLUSH);
 }
 
-#else
-
-static int qemu_rbd_co_flush(BlockDriverState *bs)
-{
-#if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 1)
-    /* rbd_flush added in 0.1.1 */
-    BDRVRBDState *s = bs->opaque;
-    return rbd_flush(s->image);
-#else
-    return 0;
-#endif
-}
-#endif
-
 static int qemu_rbd_getinfo(BlockDriverState *bs, BlockDriverInfo *bdi)
 {
     BDRVRBDState *s = bs->opaque;
@@ -1210,7 +1119,6 @@ static int qemu_rbd_snap_list(BlockDriverState *bs,
     return snap_count;
 }
 
-#ifdef LIBRBD_SUPPORTS_DISCARD
 static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs,
                                          int64_t offset,
                                          int bytes,
@@ -1220,9 +1128,7 @@ static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs,
     return rbd_start_aio(bs, offset, NULL, bytes, cb, opaque,
                          RBD_AIO_DISCARD);
 }
-#endif
 
-#ifdef LIBRBD_SUPPORTS_INVALIDATE
 static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs,
                                                       Error **errp)
 {
@@ -1232,7 +1138,6 @@ static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs,
         error_setg_errno(errp, -r, "Failed to invalidate the cache");
     }
 }
-#endif
 
 static QemuOptsList qemu_rbd_create_opts = {
     .name = "rbd-create-opts",
@@ -1290,23 +1195,14 @@ static BlockDriver bdrv_rbd = {
     .bdrv_aio_preadv        = qemu_rbd_aio_preadv,
     .bdrv_aio_pwritev       = qemu_rbd_aio_pwritev,
 
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
     .bdrv_aio_flush         = qemu_rbd_aio_flush,
-#else
-    .bdrv_co_flush_to_disk  = qemu_rbd_co_flush,
-#endif
-
-#ifdef LIBRBD_SUPPORTS_DISCARD
     .bdrv_aio_pdiscard      = qemu_rbd_aio_pdiscard,
-#endif
 
     .bdrv_snapshot_create   = qemu_rbd_snap_create,
     .bdrv_snapshot_delete   = qemu_rbd_snap_remove,
     .bdrv_snapshot_list     = qemu_rbd_snap_list,
     .bdrv_snapshot_goto     = qemu_rbd_snap_rollback,
-#ifdef LIBRBD_SUPPORTS_INVALIDATE
     .bdrv_co_invalidate_cache = qemu_rbd_co_invalidate_cache,
-#endif
 
     .strong_runtime_opts    = qemu_rbd_strong_runtime_opts,
 };
meson.build +0 -0
index 1559e8d873..644ef36476 100644

meson.build if not get_option('rbd').auto() or have_block · line 725

Quoted 5 lines
meson.build +2 -0
@@ -721,13 +721,16 @@ if not get_option('rbd').auto() or have_block
       int main(void) {
         rados_t cluster;
         rados_create(&cluster, NULL);
+        #if LIBRBD_VERSION_CODE < LIBRBD_VERSION(1, 12, 0)
+        #error

Hi Peter,

Quoted 8 lines

Just a nit, but I would stick to the actual version of the library instead of the package version. librbd major version is 1, librados major version is 2 -- it shows up in ldd, when listing /usr/lib, etc. Something like

    #error librbd >= 1.12.0 required

here

Okay.

Quoted 10 lines

meson.build if not get_option('rbd').auto() or have_block · line 731

Quoted 8 lines
meson.build +2 -1
+        #endif
         return 0;
       }''', dependencies: [librbd, librados])
       rbd = declare_dependency(dependencies: [librbd, librados])
     elif get_option('rbd').enabled()
-      error('could not link librados')
+      error('librados/librbd >= 12.0.0 required')

and

Quoted 8 lines

error('could not link librados/librbd')

meson.build if not get_option('rbd').auto() or have_block · line 733

Quoted 3 lines
meson.build +1 -1
     else
-      warning('could not link librados, disabling')
+      warning('librados/librbd >= 12.0.0 not found, disabling rbd support')

warning('could not link librados/librbd, disabling')

here to avoid repeating the version.

I would only like to change it if the "#error" is visible in the actual configure output. Have not testet your proposal yet.

If its visible I am fine to change it.

Peter

#4 lore raw

Re: [PATCH V3 1/6] block/rbd: bump librbd requirement to luminous release

Quoted 309 lines · Peter Lieven

Am 16.06.21 um 14:26 schrieb Ilya Dryomov:

Quoted 279 lines · Peter Lieven
Quoted 271 lines

even luminous (version 12.2) is unmaintained for over 3 years now. Bump the requirement to get rid of the ifdef'ry in the code. Qemu 6.1 dropped the support for RHEL-7 which was the last supported OS that required an older librbd.

---
 block/rbd.c | 120 ++++------------------------------------------------
 meson.build |   7 ++-
 2 files changed, 13 insertions(+), 114 deletions(-)
block/rbd.c +8 -112
index 26f64cce7c..6b1cbe1d75 100644
@@ -55,24 +55,10 @@
  * leading "\".
  */
 
-/* rbd_aio_discard added in 0.1.2 */
-#if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 2)
-#define LIBRBD_SUPPORTS_DISCARD
-#else
-#undef LIBRBD_SUPPORTS_DISCARD
-#endif
-
 #define OBJ_MAX_SIZE (1UL << OBJ_DEFAULT_OBJ_ORDER)
 
 #define RBD_MAX_SNAPS 100
 
-/* The LIBRBD_SUPPORTS_IOVEC is defined in librbd.h */
-#ifdef LIBRBD_SUPPORTS_IOVEC
-#define LIBRBD_USE_IOVEC 1
-#else
-#define LIBRBD_USE_IOVEC 0
-#endif
-
 typedef enum {
     RBD_AIO_READ,
     RBD_AIO_WRITE,
@@ -84,7 +70,6 @@ typedef struct RBDAIOCB {
     BlockAIOCB common;
     int64_t ret;
     QEMUIOVector *qiov;
-    char *bounce;
     RBDAIOCmd cmd;
     int error;
     struct BDRVRBDState *s;
@@ -94,7 +79,6 @@ typedef struct RADOSCB {
     RBDAIOCB *acb;
     struct BDRVRBDState *s;
     int64_t size;
-    char *buf;
     int64_t ret;
 } RADOSCB;
 
@@ -342,13 +326,9 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs_json,
 
 static void qemu_rbd_memset(RADOSCB *rcb, int64_t offs)
 {
-    if (LIBRBD_USE_IOVEC) {
-        RBDAIOCB *acb = rcb->acb;
-        iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
-                   acb->qiov->size - offs);
-    } else {
-        memset(rcb->buf + offs, 0, rcb->size - offs);
-    }
+    RBDAIOCB *acb = rcb->acb;
+    iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
+               acb->qiov->size - offs);
 }
 
 /* FIXME Deprecate and remove keypairs or make it available in QMP. */
@@ -504,13 +484,6 @@ static void qemu_rbd_complete_aio(RADOSCB *rcb)
 
     g_free(rcb);
 
-    if (!LIBRBD_USE_IOVEC) {
-        if (acb->cmd == RBD_AIO_READ) {
-            qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
-        }
-        qemu_vfree(acb->bounce);
-    }
-
     acb->common.cb(acb->common.opaque, (acb->ret > 0 ? 0 : acb->ret));
 
     qemu_aio_unref(acb);
@@ -878,28 +851,6 @@ static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb)
                                      rbd_finish_bh, rcb);
 }
 
-static int rbd_aio_discard_wrapper(rbd_image_t image,
-                                   uint64_t off,
-                                   uint64_t len,
-                                   rbd_completion_t comp)
-{
-#ifdef LIBRBD_SUPPORTS_DISCARD
-    return rbd_aio_discard(image, off, len, comp);
-#else
-    return -ENOTSUP;
-#endif
-}
-
-static int rbd_aio_flush_wrapper(rbd_image_t image,
-                                 rbd_completion_t comp)
-{
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
-    return rbd_aio_flush(image, comp);
-#else
-    return -ENOTSUP;
-#endif
-}
-
 static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
                                  int64_t off,
                                  QEMUIOVector *qiov,
@@ -922,21 +873,6 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
 
     rcb = g_new(RADOSCB, 1);
 
-    if (!LIBRBD_USE_IOVEC) {
-        if (cmd == RBD_AIO_DISCARD || cmd == RBD_AIO_FLUSH) {
-            acb->bounce = NULL;
-        } else {
-            acb->bounce = qemu_try_blockalign(bs, qiov->size);
-            if (acb->bounce == NULL) {
-                goto failed;
-            }
-        }
-        if (cmd == RBD_AIO_WRITE) {
-            qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
-        }
-        rcb->buf = acb->bounce;
-    }
-
     acb->ret = 0;
     acb->error = 0;
     acb->s = s;
@@ -950,7 +886,7 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
     }
 
     switch (cmd) {
-    case RBD_AIO_WRITE: {
+    case RBD_AIO_WRITE:
         /*
          * RBD APIs don't allow us to write more than actual size, so in order
          * to support growing images, we resize the image before write
@@ -962,25 +898,16 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
                 goto failed_completion;
             }
         }
-#ifdef LIBRBD_SUPPORTS_IOVEC
-            r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
-#else
-            r = rbd_aio_write(s->image, off, size, rcb->buf, c);
-#endif
+        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
         break;
-    }
     case RBD_AIO_READ:
-#ifdef LIBRBD_SUPPORTS_IOVEC
-            r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
-#else
-            r = rbd_aio_read(s->image, off, size, rcb->buf, c);
-#endif
+        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
         break;
     case RBD_AIO_DISCARD:
-        r = rbd_aio_discard_wrapper(s->image, off, size, c);
+        r = rbd_aio_discard(s->image, off, size, c);
         break;
     case RBD_AIO_FLUSH:
-        r = rbd_aio_flush_wrapper(s->image, c);
+        r = rbd_aio_flush(s->image, c);
         break;
     default:
         r = -EINVAL;
@@ -995,9 +922,6 @@ failed_completion:
     rbd_aio_release(c);
 failed:
     g_free(rcb);
-    if (!LIBRBD_USE_IOVEC) {
-        qemu_vfree(acb->bounce);
-    }
 
     qemu_aio_unref(acb);
     return NULL;
@@ -1023,7 +947,6 @@ static BlockAIOCB *qemu_rbd_aio_pwritev(BlockDriverState *bs,
                          RBD_AIO_WRITE);
 }
 
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
 static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
                                       BlockCompletionFunc *cb,
                                       void *opaque)
@@ -1031,20 +954,6 @@ static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
     return rbd_start_aio(bs, 0, NULL, 0, cb, opaque, RBD_AIO_FLUSH);
 }
 
-#else
-
-static int qemu_rbd_co_flush(BlockDriverState *bs)
-{
-#if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 1)
-    /* rbd_flush added in 0.1.1 */
-    BDRVRBDState *s = bs->opaque;
-    return rbd_flush(s->image);
-#else
-    return 0;
-#endif
-}
-#endif
-
 static int qemu_rbd_getinfo(BlockDriverState *bs, BlockDriverInfo *bdi)
 {
     BDRVRBDState *s = bs->opaque;
@@ -1210,7 +1119,6 @@ static int qemu_rbd_snap_list(BlockDriverState *bs,
     return snap_count;
 }
 
-#ifdef LIBRBD_SUPPORTS_DISCARD
 static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs,
                                          int64_t offset,
                                          int bytes,
@@ -1220,9 +1128,7 @@ static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs,
     return rbd_start_aio(bs, offset, NULL, bytes, cb, opaque,
                          RBD_AIO_DISCARD);
 }
-#endif
 
-#ifdef LIBRBD_SUPPORTS_INVALIDATE
 static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs,
                                                       Error **errp)
 {
@@ -1232,7 +1138,6 @@ static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs,
         error_setg_errno(errp, -r, "Failed to invalidate the cache");
     }
 }
-#endif
 
 static QemuOptsList qemu_rbd_create_opts = {
     .name = "rbd-create-opts",
@@ -1290,23 +1195,14 @@ static BlockDriver bdrv_rbd = {
     .bdrv_aio_preadv        = qemu_rbd_aio_preadv,
     .bdrv_aio_pwritev       = qemu_rbd_aio_pwritev,
 
-#ifdef LIBRBD_SUPPORTS_AIO_FLUSH
     .bdrv_aio_flush         = qemu_rbd_aio_flush,
-#else
-    .bdrv_co_flush_to_disk  = qemu_rbd_co_flush,
-#endif
-
-#ifdef LIBRBD_SUPPORTS_DISCARD
     .bdrv_aio_pdiscard      = qemu_rbd_aio_pdiscard,
-#endif
 
     .bdrv_snapshot_create   = qemu_rbd_snap_create,
     .bdrv_snapshot_delete   = qemu_rbd_snap_remove,
     .bdrv_snapshot_list     = qemu_rbd_snap_list,
     .bdrv_snapshot_goto     = qemu_rbd_snap_rollback,
-#ifdef LIBRBD_SUPPORTS_INVALIDATE
     .bdrv_co_invalidate_cache = qemu_rbd_co_invalidate_cache,
-#endif
 
     .strong_runtime_opts    = qemu_rbd_strong_runtime_opts,
 };
meson.build +0 -0
index 1559e8d873..644ef36476 100644

meson.build if not get_option('rbd').auto() or have_block · line 725

Quoted 5 lines
meson.build +2 -0
@@ -721,13 +721,16 @@ if not get_option('rbd').auto() or have_block
       int main(void) {
         rados_t cluster;
         rados_create(&cluster, NULL);
+        #if LIBRBD_VERSION_CODE < LIBRBD_VERSION(1, 12, 0)
+        #error

Hi Peter,

Quoted 8 lines

Just a nit, but I would stick to the actual version of the library instead of the package version. librbd major version is 1, librados major version is 2 -- it shows up in ldd, when listing /usr/lib, etc. Something like

    #error librbd >= 1.12.0 required

here

Okay.

Quoted 15 lines

meson.build if not get_option('rbd').auto() or have_block · line 731

Quoted 8 lines
meson.build +2 -1
+        #endif
         return 0;
       }''', dependencies: [librbd, librados])
       rbd = declare_dependency(dependencies: [librbd, librados])
     elif get_option('rbd').enabled()
-      error('could not link librados')
+      error('librados/librbd >= 12.0.0 required')

and

error('could not link librados/librbd')

Quoted 3 lines
meson.build +1 -1
     else
-      warning('could not link librados, disabling')
+      warning('librados/librbd >= 12.0.0 not found, disabling rbd support')
Quoted 6 lines
Quoted 3 lines

warning('could not link librados/librbd, disabling')

here to avoid repeating the version.

I would only like to change it if the "#error" is visible in the actual configure output. Have not testet your proposal yet.

Looks like it's not, only in build/meson-logs/meson-log.txt.

In that case, just tweak the version numbers and since librados and librbd have different versions, don't mention librados.

Thanks,

Ilya

#5 lore raw

PATCH v3 2/6 block/rbd: store object_size in BDRVRBDState

In reply to Peter Lieven
---
 block/rbd.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)
block/rbd.c +7 -11
index 6b1cbe1d75..b4caea4f1b 100644
@@ -90,6 +90,7 @@ typedef struct BDRVRBDState {
     char *snap;
     char *namespace;
     uint64_t image_size;
+    uint64_t object_size;
 } BDRVRBDState;
 
 static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
@@ -675,6 +676,7 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
     const QDictEntry *e;
     Error *local_err = NULL;
     char *keypairs, *secretid;
+    rbd_image_info_t info;
     int r;
 
     keypairs = g_strdup(qdict_get_try_str(options, "=keyvalue-pairs"));
@@ -739,13 +741,15 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
         goto failed_open;
     }
 
-    r = rbd_get_size(s->image, &s->image_size);
+    r = rbd_stat(s->image, &info, sizeof(info));
     if (r < 0) {
-        error_setg_errno(errp, -r, "error getting image size from %s",
+        error_setg_errno(errp, -r, "error getting image info from %s",
                          s->image_name);
         rbd_close(s->image);
         goto failed_open;
     }
+    s->image_size = info.size;
+    s->object_size = info.obj_size;
 
     /* If we are using an rbd snapshot, we must be r/o, otherwise
      * leave as-is */
@@ -957,15 +961,7 @@ static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
 static int qemu_rbd_getinfo(BlockDriverState *bs, BlockDriverInfo *bdi)
 {
     BDRVRBDState *s = bs->opaque;
-    rbd_image_info_t info;
-    int r;
-
-    r = rbd_stat(s->image, &info, sizeof(info));
-    if (r < 0) {
-        return r;
-    }
-
-    bdi->cluster_size = info.obj_size;
+    bdi->cluster_size = s->object_size;
     return 0;
 }
 
Signature · 1 line
2.17.1
Reviewed-by on v3 2/6
#6 lore raw

Re: [PATCH V3 2/6] block/rbd: store object_size in BDRVRBDState

Quoted 62 lines · Peter Lieven
---
 block/rbd.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)
block/rbd.c +7 -12
index 6b1cbe1d75..b4caea4f1b 100644
@@ -90,6 +90,7 @@ typedef struct BDRVRBDState {
     char *snap;
     char *namespace;
     uint64_t image_size;
+    uint64_t object_size;
 } BDRVRBDState;
 
 static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
@@ -675,6 +676,7 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
     const QDictEntry *e;
     Error *local_err = NULL;
     char *keypairs, *secretid;
+    rbd_image_info_t info;
     int r;
 
     keypairs = g_strdup(qdict_get_try_str(options, "=keyvalue-pairs"));
@@ -739,13 +741,15 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
         goto failed_open;
     }
 
-    r = rbd_get_size(s->image, &s->image_size);
+    r = rbd_stat(s->image, &info, sizeof(info));
     if (r < 0) {
-        error_setg_errno(errp, -r, "error getting image size from %s",
+        error_setg_errno(errp, -r, "error getting image info from %s",
                          s->image_name);
         rbd_close(s->image);
         goto failed_open;
     }
+    s->image_size = info.size;
+    s->object_size = info.obj_size;
 
     /* If we are using an rbd snapshot, we must be r/o, otherwise
      * leave as-is */
@@ -957,15 +961,7 @@ static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
 static int qemu_rbd_getinfo(BlockDriverState *bs, BlockDriverInfo *bdi)
 {
     BDRVRBDState *s = bs->opaque;
-    rbd_image_info_t info;
-    int r;
-
-    r = rbd_stat(s->image, &info, sizeof(info));
-    if (r < 0) {
-        return r;
-    }
-
-    bdi->cluster_size = info.obj_size;
+    bdi->cluster_size = s->object_size;
     return 0;
 }
 
--
Quoted 4 lines

2.17.1

Thanks,

Ilya

#7 lore raw

PATCH v3 3/6 block/rbd: update s->image_size in qemu_rbd_getlength

In reply to Peter Lieven

in case the image size changed we should adjust our internally stored size as well.

---
 block/rbd.c | 1 +
 1 file changed, 1 insertion(+)
block/rbd.c +1 -0
index b4caea4f1b..97a2ae4c84 100644
@@ -976,6 +976,7 @@ static int64_t qemu_rbd_getlength(BlockDriverState *bs)
         return r;
     }
 
+    s->image_size = info.size;
     return info.size;
 }
 
Signature · 1 line
2.17.1
#8 lore raw

Re: [PATCH V3 3/6] block/rbd: update s->image_size in qemu_rbd_getlength

Quoted 13 lines · Peter Lieven

in case the image size changed we should adjust our internally stored size as well.

---
 block/rbd.c | 1 +
 1 file changed, 1 insertion(+)
block/rbd.c +0 -0
index b4caea4f1b..97a2ae4c84 100644

block/rbd.c static int64_t qemu_rbd_getlength(BlockDriverState *bs) · line 980

Quoted 5 lines
block/rbd.c +1 -0
@@ -976,6 +976,7 @@ static int64_t qemu_rbd_getlength(BlockDriverState *bs)
         return r;
     }
 
+    s->image_size = info.size;
     return info.size;

Since you are touching this function might as well switch to rbd_get_size() to put size directly into s->image_size and return s->image_size, skipping rbd_image_info_t.

Thanks,

Ilya

#9 lore raw

PATCH v3 4/6 block/rbd: migrate from aio to coroutines

In reply to Peter Lieven
---
 block/rbd.c | 255 ++++++++++++++++++----------------------------------
 1 file changed, 87 insertions(+), 168 deletions(-)
block/rbd.c +87 -168
index 97a2ae4c84..0d8612a988 100644
@@ -66,22 +66,6 @@ typedef enum {
     RBD_AIO_FLUSH
 } RBDAIOCmd;
 
-typedef struct RBDAIOCB {
-    BlockAIOCB common;
-    int64_t ret;
-    QEMUIOVector *qiov;
-    RBDAIOCmd cmd;
-    int error;
-    struct BDRVRBDState *s;
-} RBDAIOCB;
-
-typedef struct RADOSCB {
-    RBDAIOCB *acb;
-    struct BDRVRBDState *s;
-    int64_t size;
-    int64_t ret;
-} RADOSCB;
-
 typedef struct BDRVRBDState {
     rados_t cluster;
     rados_ioctx_t io_ctx;
@@ -93,6 +77,13 @@ typedef struct BDRVRBDState {
     uint64_t object_size;
 } BDRVRBDState;
 
+typedef struct RBDTask {
+    BlockDriverState *bs;
+    Coroutine *co;
+    bool complete;
+    int64_t ret;
+} RBDTask;
+
 static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
                             BlockdevOptionsRbd *opts, bool cache,
                             const char *keypairs, const char *secretid,
@@ -325,13 +316,6 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs_json,
     return ret;
 }
 
-static void qemu_rbd_memset(RADOSCB *rcb, int64_t offs)
-{
-    RBDAIOCB *acb = rcb->acb;
-    iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
-               acb->qiov->size - offs);
-}
-
 /* FIXME Deprecate and remove keypairs or make it available in QMP. */
 static int qemu_rbd_do_create(BlockdevCreateOptions *options,
                               const char *keypairs, const char *password_secret,
@@ -450,46 +434,6 @@ exit:
     return ret;
 }
 
-/*
- * This aio completion is being called from rbd_finish_bh() and runs in qemu
- * BH context.
- */
-static void qemu_rbd_complete_aio(RADOSCB *rcb)
-{
-    RBDAIOCB *acb = rcb->acb;
-    int64_t r;
-
-    r = rcb->ret;
-
-    if (acb->cmd != RBD_AIO_READ) {
-        if (r < 0) {
-            acb->ret = r;
-            acb->error = 1;
-        } else if (!acb->error) {
-            acb->ret = rcb->size;
-        }
-    } else {
-        if (r < 0) {
-            qemu_rbd_memset(rcb, 0);
-            acb->ret = r;
-            acb->error = 1;
-        } else if (r < rcb->size) {
-            qemu_rbd_memset(rcb, r);
-            if (!acb->error) {
-                acb->ret = rcb->size;
-            }
-        } else if (!acb->error) {
-            acb->ret = r;
-        }
-    }
-
-    g_free(rcb);
-
-    acb->common.cb(acb->common.opaque, (acb->ret > 0 ? 0 : acb->ret));
-
-    qemu_aio_unref(acb);
-}
-
 static char *qemu_rbd_mon_host(BlockdevOptionsRbd *opts, Error **errp)
 {
     const char **vals;
@@ -826,89 +770,50 @@ static int qemu_rbd_resize(BlockDriverState *bs, uint64_t size)
     return 0;
 }
 
-static const AIOCBInfo rbd_aiocb_info = {
-    .aiocb_size = sizeof(RBDAIOCB),
-};
-
-static void rbd_finish_bh(void *opaque)
+static void qemu_rbd_finish_bh(void *opaque)
 {
-    RADOSCB *rcb = opaque;
-    qemu_rbd_complete_aio(rcb);
+    RBDTask *task = opaque;
+    task->complete = 1;
+    aio_co_wake(task->co);
 }
 
-/*
- * This is the callback function for rbd_aio_read and _write
- *
- * Note: this function is being called from a non qemu thread so
- * we need to be careful about what we do here. Generally we only
- * schedule a BH, and do the rest of the io completion handling
- * from rbd_finish_bh() which runs in a qemu context.
- */
-static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb)
+static void qemu_rbd_completion_cb(rbd_completion_t c, RBDTask *task)
 {
-    RBDAIOCB *acb = rcb->acb;
-
-    rcb->ret = rbd_aio_get_return_value(c);
+    task->ret = rbd_aio_get_return_value(c);
     rbd_aio_release(c);
-
-    replay_bh_schedule_oneshot_event(bdrv_get_aio_context(acb->common.bs),
-                                     rbd_finish_bh, rcb);
+    aio_bh_schedule_oneshot(bdrv_get_aio_context(task->bs),
+                            qemu_rbd_finish_bh, task);
 }
 
-static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
-                                 int64_t off,
-                                 QEMUIOVector *qiov,
-                                 int64_t size,
-                                 BlockCompletionFunc *cb,
-                                 void *opaque,
-                                 RBDAIOCmd cmd)
+static int coroutine_fn qemu_rbd_start_co(BlockDriverState *bs,
+                                          uint64_t offset,
+                                          uint64_t bytes,
+                                          QEMUIOVector *qiov,
+                                          int flags,
+                                          RBDAIOCmd cmd)
 {
-    RBDAIOCB *acb;
-    RADOSCB *rcb = NULL;
+    BDRVRBDState *s = bs->opaque;
+    RBDTask task = { .bs = bs, .co = qemu_coroutine_self() };
     rbd_completion_t c;
     int r;
 
-    BDRVRBDState *s = bs->opaque;
+    assert(!qiov || qiov->size == bytes);
 
-    acb = qemu_aio_get(&rbd_aiocb_info, bs, cb, opaque);
-    acb->cmd = cmd;
-    acb->qiov = qiov;
-    assert(!qiov || qiov->size == size);
-
-    rcb = g_new(RADOSCB, 1);
-
-    acb->ret = 0;
-    acb->error = 0;
-    acb->s = s;
-
-    rcb->acb = acb;
-    rcb->s = acb->s;
-    rcb->size = size;
-    r = rbd_aio_create_completion(rcb, (rbd_callback_t) rbd_finish_aiocb, &c);
+    r = rbd_aio_create_completion(&task,
+                                  (rbd_callback_t) qemu_rbd_completion_cb, &c);
     if (r < 0) {
-        goto failed;
+        return r;
     }
 
     switch (cmd) {
-    case RBD_AIO_WRITE:
-        /*
-         * RBD APIs don't allow us to write more than actual size, so in order
-         * to support growing images, we resize the image before write
-         * operations that exceed the current size.
-         */
-        if (off + size > s->image_size) {
-            r = qemu_rbd_resize(bs, off + size);
-            if (r < 0) {
-                goto failed_completion;
-            }
-        }
-        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
-        break;
     case RBD_AIO_READ:
-        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
+        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, offset, c);
+        break;
+    case RBD_AIO_WRITE:
+        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, offset, c);
         break;
     case RBD_AIO_DISCARD:
-        r = rbd_aio_discard(s->image, off, size, c);
+        r = rbd_aio_discard(s->image, offset, bytes, c);
         break;
     case RBD_AIO_FLUSH:
         r = rbd_aio_flush(s->image, c);
@@ -918,44 +823,69 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
     }
 
     if (r < 0) {
-        goto failed_completion;
+        error_report("rbd request failed early: cmd %d offset %" PRIu64
+                     " bytes %" PRIu64 " flags %d r %d (%s)", cmd, offset,
+                     bytes, flags, r, strerror(-r));
+        rbd_aio_release(c);
+        return r;
     }
-    return &acb->common;
 
-failed_completion:
-    rbd_aio_release(c);
-failed:
-    g_free(rcb);
+    while (!task.complete) {
+        qemu_coroutine_yield();
+    }
 
-    qemu_aio_unref(acb);
-    return NULL;
+    if (task.ret < 0) {
+        error_report("rbd request failed: cmd %d offset %" PRIu64 " bytes %"
+                     PRIu64 " flags %d task.ret %" PRIi64 " (%s)", cmd, offset,
+                     bytes, flags, task.ret, strerror(-task.ret));
+        return task.ret;
+    }
+
+    /* zero pad short reads */
+    if (cmd == RBD_AIO_READ && task.ret < qiov->size) {
+        qemu_iovec_memset(qiov, task.ret, 0, qiov->size - task.ret);
+    }
+
+    return 0;
+}
+
+static int
+coroutine_fn qemu_rbd_co_preadv(BlockDriverState *bs, uint64_t offset,
+                               uint64_t bytes, QEMUIOVector *qiov,
+                               int flags)
+{
+    return qemu_rbd_start_co(bs, offset, bytes, qiov, flags, RBD_AIO_READ);
 }
 
-static BlockAIOCB *qemu_rbd_aio_preadv(BlockDriverState *bs,
-                                       uint64_t offset, uint64_t bytes,
-                                       QEMUIOVector *qiov, int flags,
-                                       BlockCompletionFunc *cb,
-                                       void *opaque)
+static int
+coroutine_fn qemu_rbd_co_pwritev(BlockDriverState *bs, uint64_t offset,
+                                 uint64_t bytes, QEMUIOVector *qiov,
+                                 int flags)
 {
-    return rbd_start_aio(bs, offset, qiov, bytes, cb, opaque,
-                         RBD_AIO_READ);
+    BDRVRBDState *s = bs->opaque;
+    /*
+     * RBD APIs don't allow us to write more than actual size, so in order
+     * to support growing images, we resize the image before write
+     * operations that exceed the current size.
+     */
+    if (offset + bytes > s->image_size) {
+        int r = qemu_rbd_resize(bs, offset + bytes);
+        if (r < 0) {
+            return r;
+        }
+    }
+    return qemu_rbd_start_co(bs, offset, bytes, qiov, flags, RBD_AIO_WRITE);
 }
 
-static BlockAIOCB *qemu_rbd_aio_pwritev(BlockDriverState *bs,
-                                        uint64_t offset, uint64_t bytes,
-                                        QEMUIOVector *qiov, int flags,
-                                        BlockCompletionFunc *cb,
-                                        void *opaque)
+static int coroutine_fn qemu_rbd_co_flush(BlockDriverState *bs)
 {
-    return rbd_start_aio(bs, offset, qiov, bytes, cb, opaque,
-                         RBD_AIO_WRITE);
+    return qemu_rbd_start_co(bs, 0, 0, NULL, 0, RBD_AIO_FLUSH);
 }
 
-static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs,
-                                      BlockCompletionFunc *cb,
-                                      void *opaque)
+static int coroutine_fn qemu_rbd_co_pdiscard(BlockDriverState *bs,
+                                             int64_t offset, int count)
 {
-    return rbd_start_aio(bs, 0, NULL, 0, cb, opaque, RBD_AIO_FLUSH);
+    return qemu_rbd_start_co(bs, offset, count, NULL, 0, RBD_AIO_DISCARD);
 }
 
 static int qemu_rbd_getinfo(BlockDriverState *bs, BlockDriverInfo *bdi)
@@ -1116,16 +1046,6 @@ static int qemu_rbd_snap_list(BlockDriverState *bs,
     return snap_count;
 }
 
-static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs,
-                                         int64_t offset,
-                                         int bytes,
-                                         BlockCompletionFunc *cb,
-                                         void *opaque)
-{
-    return rbd_start_aio(bs, offset, NULL, bytes, cb, opaque,
-                         RBD_AIO_DISCARD);
-}
-
 static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs,
                                                       Error **errp)
 {
@@ -1189,11 +1109,10 @@ static BlockDriver bdrv_rbd = {
     .bdrv_co_truncate       = qemu_rbd_co_truncate,
     .protocol_name          = "rbd",
 
-    .bdrv_aio_preadv        = qemu_rbd_aio_preadv,
-    .bdrv_aio_pwritev       = qemu_rbd_aio_pwritev,
-
-    .bdrv_aio_flush         = qemu_rbd_aio_flush,
-    .bdrv_aio_pdiscard      = qemu_rbd_aio_pdiscard,
+    .bdrv_co_preadv         = qemu_rbd_co_preadv,
+    .bdrv_co_pwritev        = qemu_rbd_co_pwritev,
+    .bdrv_co_flush_to_disk  = qemu_rbd_co_flush,
+    .bdrv_co_pdiscard       = qemu_rbd_co_pdiscard,
 
     .bdrv_snapshot_create   = qemu_rbd_snap_create,
     .bdrv_snapshot_delete   = qemu_rbd_snap_remove,
Signature · 1 line
2.17.1
#10 lore raw

Re: [PATCH V3 4/6] block/rbd: migrate from aio to coroutines

Quoted 124 lines · Peter Lieven
---
 block/rbd.c | 255 ++++++++++++++++++----------------------------------
 1 file changed, 87 insertions(+), 168 deletions(-)
block/rbd.c +11 -70
index 97a2ae4c84..0d8612a988 100644
@@ -66,22 +66,6 @@ typedef enum {
     RBD_AIO_FLUSH
 } RBDAIOCmd;
 
-typedef struct RBDAIOCB {
-    BlockAIOCB common;
-    int64_t ret;
-    QEMUIOVector *qiov;
-    RBDAIOCmd cmd;
-    int error;
-    struct BDRVRBDState *s;
-} RBDAIOCB;
-
-typedef struct RADOSCB {
-    RBDAIOCB *acb;
-    struct BDRVRBDState *s;
-    int64_t size;
-    int64_t ret;
-} RADOSCB;
-
 typedef struct BDRVRBDState {
     rados_t cluster;
     rados_ioctx_t io_ctx;
@@ -93,6 +77,13 @@ typedef struct BDRVRBDState {
     uint64_t object_size;
 } BDRVRBDState;
 
+typedef struct RBDTask {
+    BlockDriverState *bs;
+    Coroutine *co;
+    bool complete;
+    int64_t ret;
+} RBDTask;
+
 static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
                             BlockdevOptionsRbd *opts, bool cache,
                             const char *keypairs, const char *secretid,
@@ -325,13 +316,6 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs_json,
     return ret;
 }
 
-static void qemu_rbd_memset(RADOSCB *rcb, int64_t offs)
-{
-    RBDAIOCB *acb = rcb->acb;
-    iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
-               acb->qiov->size - offs);
-}
-
 /* FIXME Deprecate and remove keypairs or make it available in QMP. */
 static int qemu_rbd_do_create(BlockdevCreateOptions *options,
                               const char *keypairs, const char *password_secret,
@@ -450,46 +434,6 @@ exit:
     return ret;
 }
 
-/*
- * This aio completion is being called from rbd_finish_bh() and runs in qemu
- * BH context.
- */
-static void qemu_rbd_complete_aio(RADOSCB *rcb)
-{
-    RBDAIOCB *acb = rcb->acb;
-    int64_t r;
-
-    r = rcb->ret;
-
-    if (acb->cmd != RBD_AIO_READ) {
-        if (r < 0) {
-            acb->ret = r;
-            acb->error = 1;
-        } else if (!acb->error) {
-            acb->ret = rcb->size;
-        }
-    } else {
-        if (r < 0) {
-            qemu_rbd_memset(rcb, 0);
-            acb->ret = r;
-            acb->error = 1;
-        } else if (r < rcb->size) {
-            qemu_rbd_memset(rcb, r);
-            if (!acb->error) {
-                acb->ret = rcb->size;
-            }
-        } else if (!acb->error) {
-            acb->ret = r;
-        }
-    }
-
-    g_free(rcb);
-
-    acb->common.cb(acb->common.opaque, (acb->ret > 0 ? 0 : acb->ret));
-
-    qemu_aio_unref(acb);
-}
-
 static char *qemu_rbd_mon_host(BlockdevOptionsRbd *opts, Error **errp)
 {
     const char **vals;
@@ -826,89 +770,50 @@ static int qemu_rbd_resize(BlockDriverState *bs, uint64_t size)
     return 0;
 }
 
-static const AIOCBInfo rbd_aiocb_info = {
-    .aiocb_size = sizeof(RBDAIOCB),
-};
-
-static void rbd_finish_bh(void *opaque)
+static void qemu_rbd_finish_bh(void *opaque)
 {
-    RADOSCB *rcb = opaque;
-    qemu_rbd_complete_aio(rcb);
+    RBDTask *task = opaque;
+    task->complete = 1;
+    aio_co_wake(task->co);

block/rbd.c static int qemu_rbd_resize(BlockDriverState *bs, uint64_t size) · line 846

Quoted 10 lines
block/rbd.c +0 -8
 }
 
-/*
- * This is the callback function for rbd_aio_read and _write
- *
- * Note: this function is being called from a non qemu thread so
- * we need to be careful about what we do here. Generally we only
- * schedule a BH, and do the rest of the io completion handling
- * from rbd_finish_bh() which runs in a qemu context.
- */

I would adapt this comment instead of removing it. I mean, it is still true and the reason for going through aio_bh_schedule_oneshot() instead of calling aio_co_wake() directly, right?

Quoted 112 lines
block/rbd.c +29 -57
-static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb)
+static void qemu_rbd_completion_cb(rbd_completion_t c, RBDTask *task)
 {
-    RBDAIOCB *acb = rcb->acb;
-
-    rcb->ret = rbd_aio_get_return_value(c);
+    task->ret = rbd_aio_get_return_value(c);
     rbd_aio_release(c);
-
-    replay_bh_schedule_oneshot_event(bdrv_get_aio_context(acb->common.bs),
-                                     rbd_finish_bh, rcb);
+    aio_bh_schedule_oneshot(bdrv_get_aio_context(task->bs),
+                            qemu_rbd_finish_bh, task);
 }
 
-static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
-                                 int64_t off,
-                                 QEMUIOVector *qiov,
-                                 int64_t size,
-                                 BlockCompletionFunc *cb,
-                                 void *opaque,
-                                 RBDAIOCmd cmd)
+static int coroutine_fn qemu_rbd_start_co(BlockDriverState *bs,
+                                          uint64_t offset,
+                                          uint64_t bytes,
+                                          QEMUIOVector *qiov,
+                                          int flags,
+                                          RBDAIOCmd cmd)
 {
-    RBDAIOCB *acb;
-    RADOSCB *rcb = NULL;
+    BDRVRBDState *s = bs->opaque;
+    RBDTask task = { .bs = bs, .co = qemu_coroutine_self() };
     rbd_completion_t c;
     int r;
 
-    BDRVRBDState *s = bs->opaque;
+    assert(!qiov || qiov->size == bytes);
 
-    acb = qemu_aio_get(&rbd_aiocb_info, bs, cb, opaque);
-    acb->cmd = cmd;
-    acb->qiov = qiov;
-    assert(!qiov || qiov->size == size);
-
-    rcb = g_new(RADOSCB, 1);
-
-    acb->ret = 0;
-    acb->error = 0;
-    acb->s = s;
-
-    rcb->acb = acb;
-    rcb->s = acb->s;
-    rcb->size = size;
-    r = rbd_aio_create_completion(rcb, (rbd_callback_t) rbd_finish_aiocb, &c);
+    r = rbd_aio_create_completion(&task,
+                                  (rbd_callback_t) qemu_rbd_completion_cb, &c);
     if (r < 0) {
-        goto failed;
+        return r;
     }
 
     switch (cmd) {
-    case RBD_AIO_WRITE:
-        /*
-         * RBD APIs don't allow us to write more than actual size, so in order
-         * to support growing images, we resize the image before write
-         * operations that exceed the current size.
-         */
-        if (off + size > s->image_size) {
-            r = qemu_rbd_resize(bs, off + size);
-            if (r < 0) {
-                goto failed_completion;
-            }
-        }
-        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
-        break;
     case RBD_AIO_READ:
-        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
+        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, offset, c);
+        break;
+    case RBD_AIO_WRITE:
+        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, offset, c);
         break;
     case RBD_AIO_DISCARD:
-        r = rbd_aio_discard(s->image, off, size, c);
+        r = rbd_aio_discard(s->image, offset, bytes, c);
         break;
     case RBD_AIO_FLUSH:
         r = rbd_aio_flush(s->image, c);
@@ -918,44 +823,69 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
     }
 
     if (r < 0) {
-        goto failed_completion;
+        error_report("rbd request failed early: cmd %d offset %" PRIu64
+                     " bytes %" PRIu64 " flags %d r %d (%s)", cmd, offset,
+                     bytes, flags, r, strerror(-r));
+        rbd_aio_release(c);
+        return r;
     }
-    return &acb->common;
 
-failed_completion:
-    rbd_aio_release(c);
-failed:
-    g_free(rcb);
+    while (!task.complete) {
+        qemu_coroutine_yield();
+    }
 
-    qemu_aio_unref(acb);
-    return NULL;

block/rbd.c static BlockAIOCB *rbd_start_aio(BlockDriverState *bs, · line 846

Quoted 10 lines
block/rbd.c +10 -0
+    if (task.ret < 0) {
+        error_report("rbd request failed: cmd %d offset %" PRIu64 " bytes %"
+                     PRIu64 " flags %d task.ret %" PRIi64 " (%s)", cmd, offset,
+                     bytes, flags, task.ret, strerror(-task.ret));
+        return task.ret;
+    }
+
+    /* zero pad short reads */
+    if (cmd == RBD_AIO_READ && task.ret < qiov->size) {
+        qemu_iovec_memset(qiov, task.ret, 0, qiov->size - task.ret);

I would use bytes instead of qiov->size here and on the previous line. In many systems the iovec can be larger than the op and it took me a couple of minutes to spot the "qiov->size == bytes" assert.

Also, previously we zeroed the entire op on read errors. I don't think it matters but want to make sure this was dropped on purpose.

Quoted 27 lines
block/rbd.c +17 -7
+    }
+
+    return 0;
+}
+
+static int
+coroutine_fn qemu_rbd_co_preadv(BlockDriverState *bs, uint64_t offset,
+                               uint64_t bytes, QEMUIOVector *qiov,
+                               int flags)
+{
+    return qemu_rbd_start_co(bs, offset, bytes, qiov, flags, RBD_AIO_READ);
 }
 
-static BlockAIOCB *qemu_rbd_aio_preadv(BlockDriverState *bs,
-                                       uint64_t offset, uint64_t bytes,
-                                       QEMUIOVector *qiov, int flags,
-                                       BlockCompletionFunc *cb,
-                                       void *opaque)
+static int
+coroutine_fn qemu_rbd_co_pwritev(BlockDriverState *bs, uint64_t offset,
+                                 uint64_t bytes, QEMUIOVector *qiov,
+                                 int flags)
 {
-    return rbd_start_aio(bs, offset, qiov, bytes, cb, opaque,
-                         RBD_AIO_READ);
+    BDRVRBDState *s = bs->opaque;
+    /*

block/rbd.c static BlockAIOCB *rbd_start_aio(BlockDriverState *bs, · line 876

Quoted 10 lines
block/rbd.c +10 -0
+     * RBD APIs don't allow us to write more than actual size, so in order
+     * to support growing images, we resize the image before write
+     * operations that exceed the current size.
+     */
+    if (offset + bytes > s->image_size) {
+        int r = qemu_rbd_resize(bs, offset + bytes);
+        if (r < 0) {
+            return r;
+        }
+    }

How can this be triggered today? qemu-io used to be able to, but that support was removed a long time ago:

    https://mail.gnu.org/archive/html/qemu-devel/2014-12/msg01592.html

Just checking that this piece of code is not vestigial at this point.

Thanks,

Ilya

#11 lore raw

Re: [PATCH V3 4/6] block/rbd: migrate from aio to coroutines

Am 17.06.21 um 16:43 schrieb Ilya Dryomov:

Quoted 126 lines · Peter Lieven
Quoted 125 lines
---
 block/rbd.c | 255 ++++++++++++++++++----------------------------------
 1 file changed, 87 insertions(+), 168 deletions(-)
block/rbd.c +11 -70
index 97a2ae4c84..0d8612a988 100644
@@ -66,22 +66,6 @@ typedef enum {
     RBD_AIO_FLUSH
 } RBDAIOCmd;
 
-typedef struct RBDAIOCB {
-    BlockAIOCB common;
-    int64_t ret;
-    QEMUIOVector *qiov;
-    RBDAIOCmd cmd;
-    int error;
-    struct BDRVRBDState *s;
-} RBDAIOCB;
-
-typedef struct RADOSCB {
-    RBDAIOCB *acb;
-    struct BDRVRBDState *s;
-    int64_t size;
-    int64_t ret;
-} RADOSCB;
-
 typedef struct BDRVRBDState {
     rados_t cluster;
     rados_ioctx_t io_ctx;
@@ -93,6 +77,13 @@ typedef struct BDRVRBDState {
     uint64_t object_size;
 } BDRVRBDState;
 
+typedef struct RBDTask {
+    BlockDriverState *bs;
+    Coroutine *co;
+    bool complete;
+    int64_t ret;
+} RBDTask;
+
 static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
                             BlockdevOptionsRbd *opts, bool cache,
                             const char *keypairs, const char *secretid,
@@ -325,13 +316,6 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs_json,
     return ret;
 }
 
-static void qemu_rbd_memset(RADOSCB *rcb, int64_t offs)
-{
-    RBDAIOCB *acb = rcb->acb;
-    iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
-               acb->qiov->size - offs);
-}
-
 /* FIXME Deprecate and remove keypairs or make it available in QMP. */
 static int qemu_rbd_do_create(BlockdevCreateOptions *options,
                               const char *keypairs, const char *password_secret,
@@ -450,46 +434,6 @@ exit:
     return ret;
 }
 
-/*
- * This aio completion is being called from rbd_finish_bh() and runs in qemu
- * BH context.
- */
-static void qemu_rbd_complete_aio(RADOSCB *rcb)
-{
-    RBDAIOCB *acb = rcb->acb;
-    int64_t r;
-
-    r = rcb->ret;
-
-    if (acb->cmd != RBD_AIO_READ) {
-        if (r < 0) {
-            acb->ret = r;
-            acb->error = 1;
-        } else if (!acb->error) {
-            acb->ret = rcb->size;
-        }
-    } else {
-        if (r < 0) {
-            qemu_rbd_memset(rcb, 0);
-            acb->ret = r;
-            acb->error = 1;
-        } else if (r < rcb->size) {
-            qemu_rbd_memset(rcb, r);
-            if (!acb->error) {
-                acb->ret = rcb->size;
-            }
-        } else if (!acb->error) {
-            acb->ret = r;
-        }
-    }
-
-    g_free(rcb);
-
-    acb->common.cb(acb->common.opaque, (acb->ret > 0 ? 0 : acb->ret));
-
-    qemu_aio_unref(acb);
-}
-
 static char *qemu_rbd_mon_host(BlockdevOptionsRbd *opts, Error **errp)
 {
     const char **vals;
@@ -826,89 +770,50 @@ static int qemu_rbd_resize(BlockDriverState *bs, uint64_t size)
     return 0;
 }
 
-static const AIOCBInfo rbd_aiocb_info = {
-    .aiocb_size = sizeof(RBDAIOCB),
-};
-
-static void rbd_finish_bh(void *opaque)
+static void qemu_rbd_finish_bh(void *opaque)
 {
-    RADOSCB *rcb = opaque;
-    qemu_rbd_complete_aio(rcb);
+    RBDTask *task = opaque;
+    task->complete = 1;
+    aio_co_wake(task->co);
 }
 
Quoted 11 lines

block/rbd.c static int qemu_rbd_resize(BlockDriverState *bs, uint64_t size) · line 846

Quoted 8 lines
block/rbd.c +0 -8
-/*
- * This is the callback function for rbd_aio_read and _write
- *
- * Note: this function is being called from a non qemu thread so
- * we need to be careful about what we do here. Generally we only
- * schedule a BH, and do the rest of the io completion handling
- * from rbd_finish_bh() which runs in a qemu context.
- */

I would adapt this comment instead of removing it. I mean, it is still true and the reason for going through aio_bh_schedule_oneshot() instead of calling aio_co_wake() directly, right?

Sure, its still right, but I think rbd is the only driver with this comment.

I can leave it in, no problem.

Quoted 111 lines
Quoted 111 lines
block/rbd.c +29 -55
-static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb)
+static void qemu_rbd_completion_cb(rbd_completion_t c, RBDTask *task)
 {
-    RBDAIOCB *acb = rcb->acb;
-
-    rcb->ret = rbd_aio_get_return_value(c);
+    task->ret = rbd_aio_get_return_value(c);
     rbd_aio_release(c);
-
-    replay_bh_schedule_oneshot_event(bdrv_get_aio_context(acb->common.bs),
-                                     rbd_finish_bh, rcb);
+    aio_bh_schedule_oneshot(bdrv_get_aio_context(task->bs),
+                            qemu_rbd_finish_bh, task);
 }
 
-static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
-                                 int64_t off,
-                                 QEMUIOVector *qiov,
-                                 int64_t size,
-                                 BlockCompletionFunc *cb,
-                                 void *opaque,
-                                 RBDAIOCmd cmd)
+static int coroutine_fn qemu_rbd_start_co(BlockDriverState *bs,
+                                          uint64_t offset,
+                                          uint64_t bytes,
+                                          QEMUIOVector *qiov,
+                                          int flags,
+                                          RBDAIOCmd cmd)
 {
-    RBDAIOCB *acb;
-    RADOSCB *rcb = NULL;
+    BDRVRBDState *s = bs->opaque;
+    RBDTask task = { .bs = bs, .co = qemu_coroutine_self() };
     rbd_completion_t c;
     int r;
 
-    BDRVRBDState *s = bs->opaque;
+    assert(!qiov || qiov->size == bytes);
 
-    acb = qemu_aio_get(&rbd_aiocb_info, bs, cb, opaque);
-    acb->cmd = cmd;
-    acb->qiov = qiov;
-    assert(!qiov || qiov->size == size);
-
-    rcb = g_new(RADOSCB, 1);
-
-    acb->ret = 0;
-    acb->error = 0;
-    acb->s = s;
-
-    rcb->acb = acb;
-    rcb->s = acb->s;
-    rcb->size = size;
-    r = rbd_aio_create_completion(rcb, (rbd_callback_t) rbd_finish_aiocb, &c);
+    r = rbd_aio_create_completion(&task,
+                                  (rbd_callback_t) qemu_rbd_completion_cb, &c);
     if (r < 0) {
-        goto failed;
+        return r;
     }
 
     switch (cmd) {
-    case RBD_AIO_WRITE:
-        /*
-         * RBD APIs don't allow us to write more than actual size, so in order
-         * to support growing images, we resize the image before write
-         * operations that exceed the current size.
-         */
-        if (off + size > s->image_size) {
-            r = qemu_rbd_resize(bs, off + size);
-            if (r < 0) {
-                goto failed_completion;
-            }
-        }
-        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
-        break;
     case RBD_AIO_READ:
-        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
+        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, offset, c);
+        break;
+    case RBD_AIO_WRITE:
+        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, offset, c);
         break;
     case RBD_AIO_DISCARD:
-        r = rbd_aio_discard(s->image, off, size, c);
+        r = rbd_aio_discard(s->image, offset, bytes, c);
         break;
     case RBD_AIO_FLUSH:
         r = rbd_aio_flush(s->image, c);
@@ -918,44 +823,69 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
     }
 
     if (r < 0) {
-        goto failed_completion;
+        error_report("rbd request failed early: cmd %d offset %" PRIu64
+                     " bytes %" PRIu64 " flags %d r %d (%s)", cmd, offset,
+                     bytes, flags, r, strerror(-r));
+        rbd_aio_release(c);
+        return r;
     }
-    return &acb->common;
 
-failed_completion:
-    rbd_aio_release(c);
-failed:
-    g_free(rcb);
+    while (!task.complete) {
+        qemu_coroutine_yield();
+    }
 
Quoted 15 lines

block/rbd.c static BlockAIOCB *rbd_start_aio(BlockDriverState *bs, · line 846

Quoted 12 lines
block/rbd.c +10 -2
-    qemu_aio_unref(acb);
-    return NULL;
+    if (task.ret < 0) {
+        error_report("rbd request failed: cmd %d offset %" PRIu64 " bytes %"
+                     PRIu64 " flags %d task.ret %" PRIi64 " (%s)", cmd, offset,
+                     bytes, flags, task.ret, strerror(-task.ret));
+        return task.ret;
+    }
+
+    /* zero pad short reads */
+    if (cmd == RBD_AIO_READ && task.ret < qiov->size) {
+        qemu_iovec_memset(qiov, task.ret, 0, qiov->size - task.ret);

I would use bytes instead of qiov->size here and on the previous line. In many systems the iovec can be larger than the op and it took me a couple of minutes to spot the "qiov->size == bytes" assert.

qemu_iovec_memset is an operation on the qiov. If one missed

the assertion one could argue that we memset beyond the size of the qiov

if we pass bytes - task.ret as length.

Is it true that there a systems which pass a bigger iovec than the actual op?

In this case the assertion would trigger there.

Quoted 3 lines

Also, previously we zeroed the entire op on read errors. I don't think it matters but want to make sure this was dropped on purpose.

I dropped it because its not done in other drivers. If you feel that we could reveal sensitive information I can put the wiping back in.

Quoted 41 lines
Quoted 28 lines
block/rbd.c +17 -7
+    }
+
+    return 0;
+}
+
+static int
+coroutine_fn qemu_rbd_co_preadv(BlockDriverState *bs, uint64_t offset,
+                               uint64_t bytes, QEMUIOVector *qiov,
+                               int flags)
+{
+    return qemu_rbd_start_co(bs, offset, bytes, qiov, flags, RBD_AIO_READ);
 }
 
-static BlockAIOCB *qemu_rbd_aio_preadv(BlockDriverState *bs,
-                                       uint64_t offset, uint64_t bytes,
-                                       QEMUIOVector *qiov, int flags,
-                                       BlockCompletionFunc *cb,
-                                       void *opaque)
+static int
+coroutine_fn qemu_rbd_co_pwritev(BlockDriverState *bs, uint64_t offset,
+                                 uint64_t bytes, QEMUIOVector *qiov,
+                                 int flags)
 {
-    return rbd_start_aio(bs, offset, qiov, bytes, cb, opaque,
-                         RBD_AIO_READ);
+    BDRVRBDState *s = bs->opaque;
+    /*

block/rbd.c static BlockAIOCB *rbd_start_aio(BlockDriverState *bs, · line 876

Quoted 10 lines
block/rbd.c +10 -0
+     * RBD APIs don't allow us to write more than actual size, so in order
+     * to support growing images, we resize the image before write
+     * operations that exceed the current size.
+     */
+    if (offset + bytes > s->image_size) {
+        int r = qemu_rbd_resize(bs, offset + bytes);
+        if (r < 0) {
+            return r;
+        }
+    }

How can this be triggered today? qemu-io used to be able to, but that support was removed a long time ago:

Quoted 3 lines
    https://mail.gnu.org/archive/html/qemu-devel/2014-12/msg01592.html

Just checking that this piece of code is not vestigial at this point.

We had this discussion before. The way to hit this if you want to create e.g. a qcow2 image on rbd. It does not make that much sense, but it was supported in the past.

I would vote for removing it, but it might break something somewhere.

Thanks,

Peter

#12 lore raw

Re: [PATCH V3 4/6] block/rbd: migrate from aio to coroutines

Quoted 141 lines · Peter Lieven

Am 17.06.21 um 16:43 schrieb Ilya Dryomov:

Quoted 126 lines · Peter Lieven
Quoted 125 lines
---
 block/rbd.c | 255 ++++++++++++++++++----------------------------------
 1 file changed, 87 insertions(+), 168 deletions(-)
block/rbd.c +11 -70
index 97a2ae4c84..0d8612a988 100644
@@ -66,22 +66,6 @@ typedef enum {
     RBD_AIO_FLUSH
 } RBDAIOCmd;
 
-typedef struct RBDAIOCB {
-    BlockAIOCB common;
-    int64_t ret;
-    QEMUIOVector *qiov;
-    RBDAIOCmd cmd;
-    int error;
-    struct BDRVRBDState *s;
-} RBDAIOCB;
-
-typedef struct RADOSCB {
-    RBDAIOCB *acb;
-    struct BDRVRBDState *s;
-    int64_t size;
-    int64_t ret;
-} RADOSCB;
-
 typedef struct BDRVRBDState {
     rados_t cluster;
     rados_ioctx_t io_ctx;
@@ -93,6 +77,13 @@ typedef struct BDRVRBDState {
     uint64_t object_size;
 } BDRVRBDState;
 
+typedef struct RBDTask {
+    BlockDriverState *bs;
+    Coroutine *co;
+    bool complete;
+    int64_t ret;
+} RBDTask;
+
 static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
                             BlockdevOptionsRbd *opts, bool cache,
                             const char *keypairs, const char *secretid,
@@ -325,13 +316,6 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs_json,
     return ret;
 }
 
-static void qemu_rbd_memset(RADOSCB *rcb, int64_t offs)
-{
-    RBDAIOCB *acb = rcb->acb;
-    iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0,
-               acb->qiov->size - offs);
-}
-
 /* FIXME Deprecate and remove keypairs or make it available in QMP. */
 static int qemu_rbd_do_create(BlockdevCreateOptions *options,
                               const char *keypairs, const char *password_secret,
@@ -450,46 +434,6 @@ exit:
     return ret;
 }
 
-/*
- * This aio completion is being called from rbd_finish_bh() and runs in qemu
- * BH context.
- */
-static void qemu_rbd_complete_aio(RADOSCB *rcb)
-{
-    RBDAIOCB *acb = rcb->acb;
-    int64_t r;
-
-    r = rcb->ret;
-
-    if (acb->cmd != RBD_AIO_READ) {
-        if (r < 0) {
-            acb->ret = r;
-            acb->error = 1;
-        } else if (!acb->error) {
-            acb->ret = rcb->size;
-        }
-    } else {
-        if (r < 0) {
-            qemu_rbd_memset(rcb, 0);
-            acb->ret = r;
-            acb->error = 1;
-        } else if (r < rcb->size) {
-            qemu_rbd_memset(rcb, r);
-            if (!acb->error) {
-                acb->ret = rcb->size;
-            }
-        } else if (!acb->error) {
-            acb->ret = r;
-        }
-    }
-
-    g_free(rcb);
-
-    acb->common.cb(acb->common.opaque, (acb->ret > 0 ? 0 : acb->ret));
-
-    qemu_aio_unref(acb);
-}
-
 static char *qemu_rbd_mon_host(BlockdevOptionsRbd *opts, Error **errp)
 {
     const char **vals;
@@ -826,89 +770,50 @@ static int qemu_rbd_resize(BlockDriverState *bs, uint64_t size)
     return 0;
 }
 
-static const AIOCBInfo rbd_aiocb_info = {
-    .aiocb_size = sizeof(RBDAIOCB),
-};
-
-static void rbd_finish_bh(void *opaque)
+static void qemu_rbd_finish_bh(void *opaque)
 {
-    RADOSCB *rcb = opaque;
-    qemu_rbd_complete_aio(rcb);
+    RBDTask *task = opaque;
+    task->complete = 1;
+    aio_co_wake(task->co);
 }
 
Quoted 11 lines

block/rbd.c static int qemu_rbd_resize(BlockDriverState *bs, uint64_t size) · line 846

Quoted 8 lines
block/rbd.c +0 -8
-/*
- * This is the callback function for rbd_aio_read and _write
- *
- * Note: this function is being called from a non qemu thread so
- * we need to be careful about what we do here. Generally we only
- * schedule a BH, and do the rest of the io completion handling
- * from rbd_finish_bh() which runs in a qemu context.
- */

I would adapt this comment instead of removing it. I mean, it is still true and the reason for going through aio_bh_schedule_oneshot() instead of calling aio_co_wake() directly, right?

Quoted 3 lines

Sure, its still right, but I think rbd is the only driver with this comment.

I can leave it in, no problem.

Yeah, just massage it a bit to reflect the reality (at least the function name).

Quoted 130 lines
Quoted 113 lines
Quoted 113 lines
block/rbd.c +29 -55
-static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb)
+static void qemu_rbd_completion_cb(rbd_completion_t c, RBDTask *task)
 {
-    RBDAIOCB *acb = rcb->acb;
-
-    rcb->ret = rbd_aio_get_return_value(c);
+    task->ret = rbd_aio_get_return_value(c);
     rbd_aio_release(c);
-
-    replay_bh_schedule_oneshot_event(bdrv_get_aio_context(acb->common.bs),
-                                     rbd_finish_bh, rcb);
+    aio_bh_schedule_oneshot(bdrv_get_aio_context(task->bs),
+                            qemu_rbd_finish_bh, task);
 }
 
-static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
-                                 int64_t off,
-                                 QEMUIOVector *qiov,
-                                 int64_t size,
-                                 BlockCompletionFunc *cb,
-                                 void *opaque,
-                                 RBDAIOCmd cmd)
+static int coroutine_fn qemu_rbd_start_co(BlockDriverState *bs,
+                                          uint64_t offset,
+                                          uint64_t bytes,
+                                          QEMUIOVector *qiov,
+                                          int flags,
+                                          RBDAIOCmd cmd)
 {
-    RBDAIOCB *acb;
-    RADOSCB *rcb = NULL;
+    BDRVRBDState *s = bs->opaque;
+    RBDTask task = { .bs = bs, .co = qemu_coroutine_self() };
     rbd_completion_t c;
     int r;
 
-    BDRVRBDState *s = bs->opaque;
+    assert(!qiov || qiov->size == bytes);
 
-    acb = qemu_aio_get(&rbd_aiocb_info, bs, cb, opaque);
-    acb->cmd = cmd;
-    acb->qiov = qiov;
-    assert(!qiov || qiov->size == size);
-
-    rcb = g_new(RADOSCB, 1);
-
-    acb->ret = 0;
-    acb->error = 0;
-    acb->s = s;
-
-    rcb->acb = acb;
-    rcb->s = acb->s;
-    rcb->size = size;
-    r = rbd_aio_create_completion(rcb, (rbd_callback_t) rbd_finish_aiocb, &c);
+    r = rbd_aio_create_completion(&task,
+                                  (rbd_callback_t) qemu_rbd_completion_cb, &c);
     if (r < 0) {
-        goto failed;
+        return r;
     }
 
     switch (cmd) {
-    case RBD_AIO_WRITE:
-        /*
-         * RBD APIs don't allow us to write more than actual size, so in order
-         * to support growing images, we resize the image before write
-         * operations that exceed the current size.
-         */
-        if (off + size > s->image_size) {
-            r = qemu_rbd_resize(bs, off + size);
-            if (r < 0) {
-                goto failed_completion;
-            }
-        }
-        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c);
-        break;
     case RBD_AIO_READ:
-        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c);
+        r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, offset, c);
+        break;
+    case RBD_AIO_WRITE:
+        r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, offset, c);
         break;
     case RBD_AIO_DISCARD:
-        r = rbd_aio_discard(s->image, off, size, c);
+        r = rbd_aio_discard(s->image, offset, bytes, c);
         break;
     case RBD_AIO_FLUSH:
         r = rbd_aio_flush(s->image, c);
@@ -918,44 +823,69 @@ static BlockAIOCB *rbd_start_aio(BlockDriverState *bs,
     }
 
     if (r < 0) {
-        goto failed_completion;
+        error_report("rbd request failed early: cmd %d offset %" PRIu64
+                     " bytes %" PRIu64 " flags %d r %d (%s)", cmd, offset,
+                     bytes, flags, r, strerror(-r));
+        rbd_aio_release(c);
+        return r;
     }
-    return &acb->common;
 
-failed_completion:
-    rbd_aio_release(c);
-failed:
-    g_free(rcb);
+    while (!task.complete) {
+        qemu_coroutine_yield();
+    }
 
Quoted 15 lines

block/rbd.c static BlockAIOCB *rbd_start_aio(BlockDriverState *bs, · line 846

Quoted 12 lines
block/rbd.c +10 -2
-    qemu_aio_unref(acb);
-    return NULL;
+    if (task.ret < 0) {
+        error_report("rbd request failed: cmd %d offset %" PRIu64 " bytes %"
+                     PRIu64 " flags %d task.ret %" PRIi64 " (%s)", cmd, offset,
+                     bytes, flags, task.ret, strerror(-task.ret));
+        return task.ret;
+    }
+
+    /* zero pad short reads */
+    if (cmd == RBD_AIO_READ && task.ret < qiov->size) {
+        qemu_iovec_memset(qiov, task.ret, 0, qiov->size - task.ret);

I would use bytes instead of qiov->size here and on the previous line. In many systems the iovec can be larger than the op and it took me a couple of minutes to spot the "qiov->size == bytes" assert.

Quoted 5 lines

qemu_iovec_memset is an operation on the qiov. If one missed

the assertion one could argue that we memset beyond the size of the qiov

if we pass bytes - task.ret as length.

Sorry, disregard -- I missed that rbd_aio_readv/writev() are specified in terms of iovecs (i.e. iovec base + iovec count instead of iovec base + number of bytes).

Quoted 3 lines

Is it true that there a systems which pass a bigger iovec than the actual op?

Perhaps not in QEMU but it comes in many other places. For example in the kernel when the block device driver gets a "bio" which it doesn't own and should act only on a small piece of it, etc.

Quoted 10 lines

In this case the assertion would trigger there.

Quoted 3 lines

Also, previously we zeroed the entire op on read errors. I don't think it matters but want to make sure this was dropped on purpose.

I dropped it because its not done in other drivers. If you feel that we could reveal sensitive information I can put the wiping back in.

I don't think so and we don't do this in kernel rbd either.

Quoted 43 lines
Quoted 43 lines
Quoted 30 lines
block/rbd.c +17 -7
+    }
+
+    return 0;
+}
+
+static int
+coroutine_fn qemu_rbd_co_preadv(BlockDriverState *bs, uint64_t offset,
+                               uint64_t bytes, QEMUIOVector *qiov,
+                               int flags)
+{
+    return qemu_rbd_start_co(bs, offset, bytes, qiov, flags, RBD_AIO_READ);
 }
 
-static BlockAIOCB *qemu_rbd_aio_preadv(BlockDriverState *bs,
-                                       uint64_t offset, uint64_t bytes,
-                                       QEMUIOVector *qiov, int flags,
-                                       BlockCompletionFunc *cb,
-                                       void *opaque)
+static int
+coroutine_fn qemu_rbd_co_pwritev(BlockDriverState *bs, uint64_t offset,
+                                 uint64_t bytes, QEMUIOVector *qiov,
+                                 int flags)
 {
-    return rbd_start_aio(bs, offset, qiov, bytes, cb, opaque,
-                         RBD_AIO_READ);
+    BDRVRBDState *s = bs->opaque;
+    /*

block/rbd.c static BlockAIOCB *rbd_start_aio(BlockDriverState *bs, · line 876

Quoted 10 lines
block/rbd.c +10 -0
+     * RBD APIs don't allow us to write more than actual size, so in order
+     * to support growing images, we resize the image before write
+     * operations that exceed the current size.
+     */
+    if (offset + bytes > s->image_size) {
+        int r = qemu_rbd_resize(bs, offset + bytes);
+        if (r < 0) {
+            return r;
+        }
+    }

How can this be triggered today? qemu-io used to be able to, but that support was removed a long time ago:

Quoted 6 lines
Quoted 3 lines
    https://mail.gnu.org/archive/html/qemu-devel/2014-12/msg01592.html

Just checking that this piece of code is not vestigial at this point.

We had this discussion before. The way to hit this if you want to create e.g. a qcow2 image on rbd. It does not make that much sense, but it was supported in the past.

Ah, so something like

qemu-img create -f qcow2 rbd:foo/bar 10G

Quoted 2 lines

I would vote for removing it, but it might break something somewhere.

Yeah, it's weird but definitely not up for removal in a patch that migrates from one internal API to another.

Thanks,

Ilya

#13 lore raw

PATCH v3 5/6 block/rbd: add write zeroes support

In reply to Peter Lieven
---
 block/rbd.c | 37 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)
block/rbd.c +36 -1
index 0d8612a988..ee13f08a74 100644
@@ -63,7 +63,8 @@ typedef enum {
     RBD_AIO_READ,
     RBD_AIO_WRITE,
     RBD_AIO_DISCARD,
-    RBD_AIO_FLUSH
+    RBD_AIO_FLUSH,
+    RBD_AIO_WRITE_ZEROES
 } RBDAIOCmd;
 
 typedef struct BDRVRBDState {
@@ -705,6 +706,10 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
         }
     }
 
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+    bs->supported_zero_flags = BDRV_REQ_MAY_UNMAP;
+#endif
+
     /* When extending regular files, we get zeros from the OS */
     bs->supported_truncate_flags = BDRV_REQ_ZERO_WRITE;
 
@@ -818,6 +823,18 @@ static int coroutine_fn qemu_rbd_start_co(BlockDriverState *bs,
     case RBD_AIO_FLUSH:
         r = rbd_aio_flush(s->image, c);
         break;
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+    case RBD_AIO_WRITE_ZEROES: {
+        int zero_flags = 0;
+#ifdef RBD_WRITE_ZEROES_FLAG_THICK_PROVISION
+        if (!(flags & BDRV_REQ_MAY_UNMAP)) {
+            zero_flags = RBD_WRITE_ZEROES_FLAG_THICK_PROVISION;
+        }
+#endif
+        r = rbd_aio_write_zeroes(s->image, offset, bytes, c, zero_flags, 0);
+        break;
+    }
+#endif
     default:
         r = -EINVAL;
     }
@@ -888,6 +905,21 @@ static int coroutine_fn qemu_rbd_co_pdiscard(BlockDriverState *bs,
     return qemu_rbd_start_co(bs, offset, count, NULL, 0, RBD_AIO_DISCARD);
 }
 
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+static int
+coroutine_fn qemu_rbd_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset,
+                                      int count, BdrvRequestFlags flags)
+{
+#ifndef RBD_WRITE_ZEROES_FLAG_THICK_PROVISION
+    if (!(flags & BDRV_REQ_MAY_UNMAP)) {
+        return -ENOTSUP;
+    }
+#endif
+    return qemu_rbd_start_co(bs, offset, count, NULL, flags,
+                             RBD_AIO_WRITE_ZEROES);
+}
+#endif
+
 static int qemu_rbd_getinfo(BlockDriverState *bs, BlockDriverInfo *bdi)
 {
     BDRVRBDState *s = bs->opaque;
@@ -1113,6 +1145,9 @@ static BlockDriver bdrv_rbd = {
     .bdrv_co_pwritev        = qemu_rbd_co_pwritev,
     .bdrv_co_flush_to_disk  = qemu_rbd_co_flush,
     .bdrv_co_pdiscard       = qemu_rbd_co_pdiscard,
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+    .bdrv_co_pwrite_zeroes  = qemu_rbd_co_pwrite_zeroes,
+#endif
 
     .bdrv_snapshot_create   = qemu_rbd_snap_create,
     .bdrv_snapshot_delete   = qemu_rbd_snap_remove,
Signature · 1 line
2.17.1
#14 lore raw

Re: [PATCH V3 5/6] block/rbd: add write zeroes support

Quoted 21 lines · Peter Lieven
---
 block/rbd.c | 37 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)
block/rbd.c +2 -1
index 0d8612a988..ee13f08a74 100644
@@ -63,7 +63,8 @@ typedef enum {
     RBD_AIO_READ,
     RBD_AIO_WRITE,
     RBD_AIO_DISCARD,
-    RBD_AIO_FLUSH
+    RBD_AIO_FLUSH,
+    RBD_AIO_WRITE_ZEROES
 } RBDAIOCmd;
 
 typedef struct BDRVRBDState {

block/rbd.c static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags, · line 710

Quoted 5 lines
block/rbd.c +2 -0
@@ -705,6 +706,10 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
         }
     }
 
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+    bs->supported_zero_flags = BDRV_REQ_MAY_UNMAP;

I wonder if we should also set BDRV_REQ_NO_FALLBACK here since librbd does not really have a notion of non-efficient explicit zeroing.

Thanks,

Ilya

#15 lore raw

Re: [PATCH V3 5/6] block/rbd: add write zeroes support

Am 16.06.21 um 14:34 schrieb Ilya Dryomov:

Quoted 24 lines · Peter Lieven
Quoted 23 lines
---
 block/rbd.c | 37 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)
block/rbd.c +2 -1
index 0d8612a988..ee13f08a74 100644
@@ -63,7 +63,8 @@ typedef enum {
     RBD_AIO_READ,
     RBD_AIO_WRITE,
     RBD_AIO_DISCARD,
-    RBD_AIO_FLUSH
+    RBD_AIO_FLUSH,
+    RBD_AIO_WRITE_ZEROES
 } RBDAIOCmd;
 
 typedef struct BDRVRBDState {
@@ -705,6 +706,10 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
         }
     }
 
Quoted 4 lines

block/rbd.c static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags, · line 710

Quoted 2 lines
block/rbd.c +2 -0
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+    bs->supported_zero_flags = BDRV_REQ_MAY_UNMAP;

I wonder if we should also set BDRV_REQ_NO_FALLBACK here since librbd does not really have a notion of non-efficient explicit zeroing.

This is only true if thick provisioning is supported which is in Octopus onwards, right?

So it would only be correct to set this if thick provisioning is supported otherwise we could

fail with ENOTSUP and then qemu emulates the zeroing with plain writes.

Peter

#16 lore raw

Re: [PATCH V3 5/6] block/rbd: add write zeroes support

Quoted 26 lines · Peter Lieven

Am 16.06.21 um 14:34 schrieb Ilya Dryomov:

Quoted 24 lines · Peter Lieven
Quoted 23 lines
---
 block/rbd.c | 37 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)
block/rbd.c +2 -1
index 0d8612a988..ee13f08a74 100644
@@ -63,7 +63,8 @@ typedef enum {
     RBD_AIO_READ,
     RBD_AIO_WRITE,
     RBD_AIO_DISCARD,
-    RBD_AIO_FLUSH
+    RBD_AIO_FLUSH,
+    RBD_AIO_WRITE_ZEROES
 } RBDAIOCmd;
 
 typedef struct BDRVRBDState {
@@ -705,6 +706,10 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
         }
     }
 
Quoted 7 lines
Quoted 4 lines

block/rbd.c static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags, · line 710

Quoted 2 lines
block/rbd.c +2 -0
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+    bs->supported_zero_flags = BDRV_REQ_MAY_UNMAP;

I wonder if we should also set BDRV_REQ_NO_FALLBACK here since librbd does not really have a notion of non-efficient explicit zeroing.

This is only true if thick provisioning is supported which is in Octopus onwards, right?

Since Pacific, I think.

Quoted 4 lines

So it would only be correct to set this if thick provisioning is supported otherwise we could

fail with ENOTSUP and then qemu emulates the zeroing with plain writes.

I actually had a question about that. Why are you returning ENOTSUP in case BDRV_REQ_MAY_UNMAP is not specified and that can't be fulfilled because librbd is too old for RBD_WRITE_ZEROES_FLAG_THICK_PROVISION?

My understanding has always been that BDRV_REQ_MAY_UNMAP is just a hint. Deallocating if BDRV_REQ_MAY_UNMAP is specified is not nice but should be perfectly acceptable. It is certainly better than returning ENOTSUP, particularly if ENOTSUP causes Qemu to do plain zeroing.

Thanks,

Ilya

#17 lore raw

Re: [PATCH V3 5/6] block/rbd: add write zeroes support

Am 18.06.21 um 12:34 schrieb Ilya Dryomov:

Quoted 41 lines · Peter Lieven
Quoted 25 lines

Am 16.06.21 um 14:34 schrieb Ilya Dryomov:

Quoted 24 lines · Peter Lieven
Quoted 23 lines
---
  block/rbd.c | 37 ++++++++++++++++++++++++++++++++++++-
  1 file changed, 36 insertions(+), 1 deletion(-)
block/rbd.c +2 -1
index 0d8612a988..ee13f08a74 100644
@@ -63,7 +63,8 @@ typedef enum {
      RBD_AIO_READ,
      RBD_AIO_WRITE,
      RBD_AIO_DISCARD,
-    RBD_AIO_FLUSH
+    RBD_AIO_FLUSH,
+    RBD_AIO_WRITE_ZEROES
  } RBDAIOCmd;
 
  typedef struct BDRVRBDState {
@@ -705,6 +706,10 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
          }
      }
 
Quoted 6 lines
Quoted 4 lines

block/rbd.c static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags, · line 710

Quoted 2 lines
block/rbd.c +2 -0
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+    bs->supported_zero_flags = BDRV_REQ_MAY_UNMAP;

I wonder if we should also set BDRV_REQ_NO_FALLBACK here since librbd does not really have a notion of non-efficient explicit zeroing.

This is only true if thick provisioning is supported which is in Octopus onwards, right?

Since Pacific, I think.

Quoted 3 lines

So it would only be correct to set this if thick provisioning is supported otherwise we could

fail with ENOTSUP and then qemu emulates the zeroing with plain writes.

I actually had a question about that. Why are you returning ENOTSUP in case BDRV_REQ_MAY_UNMAP is not specified and that can't be fulfilled because librbd is too old for RBD_WRITE_ZEROES_FLAG_THICK_PROVISION?

Quoted 5 lines

My understanding has always been that BDRV_REQ_MAY_UNMAP is just a hint. Deallocating if BDRV_REQ_MAY_UNMAP is specified is not nice but should be perfectly acceptable. It is certainly better than returning ENOTSUP, particularly if ENOTSUP causes Qemu to do plain zeroing.

I think this was introduced to support different provisioning modes. If BDRV_REQ_MAY_UNMAP is not set

the caller of bdrv_write_zeroes expects that the driver does thick provisioning. If the driver cannot handle that (efficiently)

qemu does a plain zero write.

I am still not fully understanding the meaning of the BDRV_REQ_NO_FALLBACK flag. The original commit states that it was introduced for qemu-img to efficiently

zero out the target and avoid the slow fallback. When I last worked on qemu-img convert I remember that there was a call to zero out the target if bdrv_has_zero_init

is not 1. It seems hat meanwhile a target_is_zero cmdline switch for qemu-img convert was added to let the user assert that a preexisting target is zero.

Maybe someone can help here if it would be right to set BDRV_REQ_NO_FALLBACK for rbd in either of the 2 cases (thick provisioning is support or not)?

Thanks

Peter

#18 lore raw

Re: [PATCH V3 5/6] block/rbd: add write zeroes support

Quoted 57 lines · Peter Lieven

Am 18.06.21 um 12:34 schrieb Ilya Dryomov:

Quoted 41 lines · Peter Lieven
Quoted 25 lines

Am 16.06.21 um 14:34 schrieb Ilya Dryomov:

Quoted 24 lines · Peter Lieven
Quoted 23 lines
---
  block/rbd.c | 37 ++++++++++++++++++++++++++++++++++++-
  1 file changed, 36 insertions(+), 1 deletion(-)
block/rbd.c +2 -1
index 0d8612a988..ee13f08a74 100644
@@ -63,7 +63,8 @@ typedef enum {
      RBD_AIO_READ,
      RBD_AIO_WRITE,
      RBD_AIO_DISCARD,
-    RBD_AIO_FLUSH
+    RBD_AIO_FLUSH,
+    RBD_AIO_WRITE_ZEROES
  } RBDAIOCmd;
 
  typedef struct BDRVRBDState {
@@ -705,6 +706,10 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
          }
      }
 
Quoted 6 lines
Quoted 4 lines

block/rbd.c static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags, · line 710

Quoted 2 lines
block/rbd.c +2 -0
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+    bs->supported_zero_flags = BDRV_REQ_MAY_UNMAP;

I wonder if we should also set BDRV_REQ_NO_FALLBACK here since librbd does not really have a notion of non-efficient explicit zeroing.

This is only true if thick provisioning is supported which is in Octopus onwards, right?

Since Pacific, I think.

Quoted 3 lines

So it would only be correct to set this if thick provisioning is supported otherwise we could

fail with ENOTSUP and then qemu emulates the zeroing with plain writes.

I actually had a question about that. Why are you returning ENOTSUP in case BDRV_REQ_MAY_UNMAP is not specified and that can't be fulfilled because librbd is too old for RBD_WRITE_ZEROES_FLAG_THICK_PROVISION?

Quoted 5 lines

My understanding has always been that BDRV_REQ_MAY_UNMAP is just a hint. Deallocating if BDRV_REQ_MAY_UNMAP is specified is not nice but should be perfectly acceptable. It is certainly better than returning ENOTSUP, particularly if ENOTSUP causes Qemu to do plain zeroing.

I think this was introduced to support different provisioning modes. If BDRV_REQ_MAY_UNMAP is not set

the caller of bdrv_write_zeroes expects that the driver does thick provisioning. If the driver cannot handle that (efficiently)

qemu does a plain zero write.

Quoted 7 lines

I am still not fully understanding the meaning of the BDRV_REQ_NO_FALLBACK flag. The original commit states that it was introduced for qemu-img to efficiently

zero out the target and avoid the slow fallback. When I last worked on qemu-img convert I remember that there was a call to zero out the target if bdrv_has_zero_init

is not 1. It seems hat meanwhile a target_is_zero cmdline switch for qemu-img convert was added to let the user assert that a preexisting target is zero.

Maybe someone can help here if it would be right to set BDRV_REQ_NO_FALLBACK for rbd in either of the 2 cases (thick provisioning is support or not)?

Since no one spoke up I think we should

a) remove the BDRV_REQ_MAY_UNMAP check in qemu_rbd_co_pwrite_zeroes() and as a consequence always unmap if librbd is too old

It's not clear what qemu's expectation is but in general Write Zeroes is allowed to unmap. The only guarantee is that subsequent reads return zeroes, everything else is a hint. This is how it is specified in the kernel and in the NVMe spec.

In particular, block/nvme.c implements it as follows:

   if (flags & BDRV_REQ_MAY_UNMAP) {
       cdw12 |= (1 << 25);
   }

This sets the Deallocate bit. But if it's not set, the device may still deallocate:

"""
If the Deallocate bit (CDW12.DEAC) is set to '1' in a Write Zeroes command, and the namespace supports clearing all bytes to 0h in the values read (e.g., bits 2:0 in the DLFEAT field are set to 001b) from a deallocated logical block and its metadata (excluding protection information), then for each specified logical block, the controller:
- should deallocate that logical block;

...

If the Deallocate bit is cleared to '0' in a Write Zeroes command, and the namespace supports clearing all bytes to 0h in the values read (e.g., bits 2:0 in the DLFEAT field are set to 001b) from a deallocated logical block and its metadata (excluding protection information), then, for each specified logical block, the controller:
- may deallocate that logical block;
"""

https://nvmexpress.org/wp-content/uploads/NVM-Express-NVM-Command-Set-Specification-2021.06.02-Ratified-1.pdf

b) set BDRV_REQ_NO_FALLBACK in supported_zero_flags

Again, it's not clear what qemu expects here, but without it we end up in a ridiculous situation where specifying the "don't allow slow fallback" switch immediately fails all efficient zeroing requests on a device where Write Zeroes is always efficient:

   $ qemu-io -c 'help write' | grep -- '-[zun]'
    -n, -- with -z, don't allow slow fallback
    -u, -- with -z, allow unmapping
    -z, -- write zeroes using blk_co_pwrite_zeroes
   $ qemu-io -f rbd -c 'write -z -u -n 0 1M' rbd:foo/bar
   write failed: Operation not supported

Thanks,

Ilya

#19 lore raw

Re: [PATCH V3 5/6] block/rbd: add write zeroes support

Quoted 118 lines

Am 26.06.2021 um 17:57 schrieb Ilya Dryomov <[email protected]>:

Quoted 57 lines · Peter Lieven
Quoted 43 lines

Am 18.06.21 um 12:34 schrieb Ilya Dryomov:

Quoted 25 lines · Peter Lieven

Am 16.06.21 um 14:34 schrieb Ilya Dryomov:

Quoted 24 lines · Peter Lieven
Quoted 23 lines
---
 block/rbd.c | 37 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)
block/rbd.c +2 -1
index 0d8612a988..ee13f08a74 100644
@@ -63,7 +63,8 @@ typedef enum {
     RBD_AIO_READ,
     RBD_AIO_WRITE,
     RBD_AIO_DISCARD,
-    RBD_AIO_FLUSH
+    RBD_AIO_FLUSH,
+    RBD_AIO_WRITE_ZEROES
 } RBDAIOCmd;
 
 typedef struct BDRVRBDState {
@@ -705,6 +706,10 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
         }
     }
 
Quoted 6 lines
Quoted 4 lines

block/rbd.c static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags, · line 710

Quoted 2 lines
block/rbd.c +2 -0
+#ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+    bs->supported_zero_flags = BDRV_REQ_MAY_UNMAP;

I wonder if we should also set BDRV_REQ_NO_FALLBACK here since librbd does not really have a notion of non-efficient explicit zeroing.

This is only true if thick provisioning is supported which is in Octopus onwards, right?

Since Pacific, I think.

Quoted 3 lines

So it would only be correct to set this if thick provisioning is supported otherwise we could

fail with ENOTSUP and then qemu emulates the zeroing with plain writes.

I actually had a question about that. Why are you returning ENOTSUP in case BDRV_REQ_MAY_UNMAP is not specified and that can't be fulfilled because librbd is too old for RBD_WRITE_ZEROES_FLAG_THICK_PROVISION?

Quoted 5 lines

My understanding has always been that BDRV_REQ_MAY_UNMAP is just a hint. Deallocating if BDRV_REQ_MAY_UNMAP is specified is not nice but should be perfectly acceptable. It is certainly better than returning ENOTSUP, particularly if ENOTSUP causes Qemu to do plain zeroing.

I think this was introduced to support different provisioning modes. If BDRV_REQ_MAY_UNMAP is not set

the caller of bdrv_write_zeroes expects that the driver does thick provisioning. If the driver cannot handle that (efficiently)

qemu does a plain zero write.

Quoted 7 lines

I am still not fully understanding the meaning of the BDRV_REQ_NO_FALLBACK flag. The original commit states that it was introduced for qemu-img to efficiently

zero out the target and avoid the slow fallback. When I last worked on qemu-img convert I remember that there was a call to zero out the target if bdrv_has_zero_init

is not 1. It seems hat meanwhile a target_is_zero cmdline switch for qemu-img convert was added to let the user assert that a preexisting target is zero.

Maybe someone can help here if it would be right to set BDRV_REQ_NO_FALLBACK for rbd in either of the 2 cases (thick provisioning is support or not)?

Since no one spoke up I think we should

a) remove the BDRV_REQ_MAY_UNMAP check in qemu_rbd_co_pwrite_zeroes() and as a consequence always unmap if librbd is too old

It's not clear what qemu's expectation is but in general Write Zeroes is allowed to unmap. The only guarantee is that subsequent reads return zeroes, everything else is a hint. This is how it is specified in the kernel and in the NVMe spec.

In particular, block/nvme.c implements it as follows:

  if (flags & BDRV_REQ_MAY_UNMAP) {
      cdw12 |= (1 << 25);
  }

This sets the Deallocate bit. But if it's not set, the device may still deallocate:

"""
If the Deallocate bit (CDW12.DEAC) is set to '1' in a Write Zeroes command, and the namespace supports clearing all bytes to 0h in the values read (e.g., bits 2:0 in the DLFEAT field are set to 001b) from a deallocated logical block and its metadata (excluding protection information), then for each specified logical block, the controller:
- should deallocate that logical block;

...

If the Deallocate bit is cleared to '0' in a Write Zeroes command, and the namespace supports clearing all bytes to 0h in the values read (e.g., bits 2:0 in the DLFEAT field are set to 001b) from a deallocated logical block and its metadata (excluding protection information), then, for each specified logical block, the controller:
- may deallocate that logical block;
"""

https://nvmexpress.org/wp-content/uploads/NVM-Express-NVM-Command-Set-Specification-2021.06.02-Ratified-1.pdf

b) set BDRV_REQ_NO_FALLBACK in supported_zero_flags

Again, it's not clear what qemu expects here, but without it we end up in a ridiculous situation where specifying the "don't allow slow fallback" switch immediately fails all efficient zeroing requests on a device where Write Zeroes is always efficient:

Quoted 7 lines
  $ qemu-io -c 'help write' | grep -- '-[zun]'
   -n, -- with -z, don't allow slow fallback
   -u, -- with -z, allow unmapping
   -z, -- write zeroes using blk_co_pwrite_zeroes
  $ qemu-io -f rbd -c 'write -z -u -n 0 1M' rbd:foo/bar
  write failed: Operation not supported

Agreed,
I will try to send a V4 early this week.

Peter

#20 lore raw

PATCH v3 6/6 block/rbd: drop qemu_rbd_refresh_limits

In reply to Peter Lieven

librbd supports 1 byte alignment for all aio operations.

Currently, there is no API call to query limits from the ceph backend. So drop the bdrv_refresh_limits completely until there is such an API call.

---
 block/rbd.c | 9 ---------
 1 file changed, 9 deletions(-)
block/rbd.c +0 -9
index ee13f08a74..368a674aa0 100644
@@ -228,14 +228,6 @@ done:
     return;
 }
 
-
-static void qemu_rbd_refresh_limits(BlockDriverState *bs, Error **errp)
-{
-    /* XXX Does RBD support AIO on less than 512-byte alignment? */
-    bs->bl.request_alignment = 512;
-}
-
-
 static int qemu_rbd_set_auth(rados_t cluster, BlockdevOptionsRbd *opts,
                              Error **errp)
 {
@@ -1128,7 +1120,6 @@ static BlockDriver bdrv_rbd = {
     .format_name            = "rbd",
     .instance_size          = sizeof(BDRVRBDState),
     .bdrv_parse_filename    = qemu_rbd_parse_filename,
-    .bdrv_refresh_limits    = qemu_rbd_refresh_limits,
     .bdrv_file_open         = qemu_rbd_open,
     .bdrv_close             = qemu_rbd_close,
     .bdrv_reopen_prepare    = qemu_rbd_reopen_prepare,
Signature · 1 line
2.17.1
Reviewed-by on v3 6/6
#21 lore raw

Re: [PATCH V3 6/6] block/rbd: drop qemu_rbd_refresh_limits

Quoted 39 lines · Peter Lieven

librbd supports 1 byte alignment for all aio operations.

Currently, there is no API call to query limits from the ceph backend. So drop the bdrv_refresh_limits completely until there is such an API call.

---
 block/rbd.c | 9 ---------
 1 file changed, 9 deletions(-)
block/rbd.c +0 -10
index ee13f08a74..368a674aa0 100644
@@ -228,14 +228,6 @@ done:
     return;
 }
 
-
-static void qemu_rbd_refresh_limits(BlockDriverState *bs, Error **errp)
-{
-    /* XXX Does RBD support AIO on less than 512-byte alignment? */
-    bs->bl.request_alignment = 512;
-}
-
-
 static int qemu_rbd_set_auth(rados_t cluster, BlockdevOptionsRbd *opts,
                              Error **errp)
 {
@@ -1128,7 +1120,6 @@ static BlockDriver bdrv_rbd = {
     .format_name            = "rbd",
     .instance_size          = sizeof(BDRVRBDState),
     .bdrv_parse_filename    = qemu_rbd_parse_filename,
-    .bdrv_refresh_limits    = qemu_rbd_refresh_limits,
     .bdrv_file_open         = qemu_rbd_open,
     .bdrv_close             = qemu_rbd_close,
     .bdrv_reopen_prepare    = qemu_rbd_reopen_prepare,
--
Quoted 4 lines

2.17.1

librbd does support 1-byte-aligned I/O (with the caveat that those code paths are probably not very well tested). Regardless, I think it is better to do read-modify-write and similar handling in librbd than in QEMU.

Thanks,

Ilya