dt-bindings: pinctrl: imx8ulp: Add pinctrl binding
Subsystems (5)
Jacky Bai
maintainerPATCH v2 1/2 dt-bindings: pinctrl: imx8ulp: Add pinctrl binding
Add pinctrl binding doc for i.MX8ULP
---
- v2 changes:
update the compatible string to align with driver side. fix a typo in title
--- .../bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml new file +79 -0
@@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8ulp-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX8ULP IOMUX Controller + +maintainers: + - Jacky Bai <[email protected]> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imx8ulp-iomuxc1 + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 5 integers and represents the mux and config + setting for one pin. The first 4 integers <mux_config_reg input_reg + mux_mode input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX8ULP Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_config_reg" indicates the offset of mux register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_mode" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Pinmux controller node + - | + iomuxc: pinctrl@298c0000 { + compatible = "fsl,imx8ulp-iomuxc1"; + reg = <0x298c0000 0x10000>; + + pinctrl_lpuart5: lpuart5grp { + fsl,pins = + <0x0138 0x08F0 0x4 0x3 0x3>, + <0x013C 0x08EC 0x4 0x3 0x3>; + }; + }; + +...
Signature · 1 line
2.26.2
Jacky Bai
maintainerPATCH v2 2/2 pinctrl: imx8ulp: Add pinctrl driver support
From: Anson Huang <[email protected]>
Add i.MX8ULP pinctrl driver support.
---
- v2 changes:
remove the an useless 'if' condition check
--- drivers/pinctrl/freescale/Kconfig | 7 + drivers/pinctrl/freescale/Makefile | 1 + drivers/pinctrl/freescale/pinctrl-imx8ulp.c | 274 ++++++++++++++++++++ 3 files changed, 282 insertions(+) create mode 100644 drivers/pinctrl/freescale/pinctrl-imx8ulp.c
drivers/pinctrl/freescale/Kconfig +7 -0
@@ -166,6 +166,13 @@ config PINCTRL_IMX8DXL help Say Y here to enable the imx8dxl pinctrl driver +config PINCTRL_IMX8ULP + tristate "IMX8ULP pinctrl driver" + depends on ARCH_MXC + select PINCTRL_IMX + help + Say Y here to enable the imx8ulp pinctrl driver + config PINCTRL_VF610 bool "Freescale Vybrid VF610 pinctrl driver" depends on SOC_VF610
drivers/pinctrl/freescale/Makefile +1 -0
@@ -24,6 +24,7 @@ obj-$(CONFIG_PINCTRL_IMX8MQ) += pinctrl-imx8mq.o obj-$(CONFIG_PINCTRL_IMX8QM) += pinctrl-imx8qm.o obj-$(CONFIG_PINCTRL_IMX8QXP) += pinctrl-imx8qxp.o obj-$(CONFIG_PINCTRL_IMX8DXL) += pinctrl-imx8dxl.o +obj-$(CONFIG_PINCTRL_IMX8ULP) += pinctrl-imx8ulp.o obj-$(CONFIG_PINCTRL_VF610) += pinctrl-vf610.o obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o
drivers/pinctrl/freescale/pinctrl-imx8ulp.c new file +274 -0
274 lines not on this page · raw message
Signature · 1 line
2.26.2
RE: [PATCH v2 2/2] pinctrl: imx8ulp: Add pinctrl driver support
Quoted 10 lines
From: Jacky Bai <[email protected]>
Sent: Monday, June 7, 2021 2:11 PM
Subject: [PATCH v2 2/2] pinctrl: imx8ulp: Add pinctrl driver supportFrom: Anson Huang <[email protected]>
Add i.MX8ULP pinctrl driver support.
Signed-off-by Anson Huang <[email protected]>Signed-off-by Jacky Bai <[email protected]>
Regards
Aisheng
Re: [PATCH v2 2/2] pinctrl: imx8ulp: Add pinctrl driver support
In reply to Jacky BaiQuoted 6 lines · Jacky Bai
From: Anson Huang <[email protected]>
Add i.MX8ULP pinctrl driver support.
Signed-off-by Anson Huang <[email protected]>Signed-off-by Jacky Bai <[email protected]>
Patch applied!
BTW does "ULP" in the name mean "ultra low power" as usual?
Yours,
Linus Walleij
Fabio Estevam
maintainerRe: [PATCH v2 2/2] pinctrl: imx8ulp: Add pinctrl driver support
Hi Linus,
Quoted 3 lines · Linus Walleij
Patch applied!
BTW does "ULP" in the name mean "ultra low power" as usual?
Yes, this is correct:
https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/i-mx-applications-processors/i-mx-8-processors/i-mx-8ulp-applications-processor-family:i.MX8ULP
Thanks
Quoted 7 lines
From: Jacky Bai <[email protected]>
Sent: Monday, June 7, 2021 2:11 PMAdd pinctrl binding doc for i.MX8ULP
Signed-off-by Jacky Bai <[email protected]>Reviewed-by Rob Herring <[email protected]>
Regards
Aisheng
Quoted 4 lines · Jacky Bai
Add pinctrl binding doc for i.MX8ULP
Signed-off-by Jacky Bai <[email protected]>Reviewed-by Rob Herring <[email protected]>
Patch applied!
Yours,
Linus Walleij